Microphone and Musical Instrument Cable Overview

Transcription

1 B R I L L I A N C E B R O A D C A S T C A B L E S 19.3 Microphone and Musical Instruent Cable Overview Flexible Microphone Cables Belden icrophone cable is used for connecting low level icrophones or usical instruents. Key properties icrophone (MIC) cable are ruggedness, flexibility, flex life and interference iunity. 19 Brilliance Broadcast MIC cable constructions utilize either 1-, 2-, 3- or 4-conductor configurations. Cable selection depends on whether the MIC or instruent is a high- or low-ipedance design. High-ipedance MICs require unbalanced single conductor (coaxial) cables while low-ipedance MICs utilize balanced 2-, 3-, or 4-conductor (quad) designs. Quad MIC cables are connected by attaching the two white conductors to one pin and two blue conductors to the other pin in a balanced-line XLR type connector. Besides the coon-ode rejection a standard balanced line, this gives coon-ode rejection at each pin, greatly reducing noise and interference. High-conductivity Copper All Belden icrophone cables with bare copper conductors utilize only high-conductivity copper produced by a process called Electrolytic Tough Pitch (ETP). This refining process produces a copper conductor that is 99.95% pure copper resulting in high-conductivity per ASTM B115. The high purity obtained fro ETP copper results in icrophone cable perforance that is coparable to that oxygen-free copper cables. Plastic cables recoended for: Lower capacitance, lower loss, greater ozone and oil resistance, lighter weight, saller diaeter. Rubber cables recoended for: Greater abrasion and ipact resistance and extra lipness so the cable will lie flat on stage or on studio floors. Four- Star Quad Low-Ipedance Cables Quad connection schee: The two blue wires (or wires directly opposite one another) are connected together to for one conductor, and siilarly the two white wires (or reaining wires) are connected together to for the second conductor. s joined in this anner lower the possibility induced noise. For ore inforation, contact Belden Technical Support: BELDEN-1

2 B R I L L I A N C E B R O A D C A S T C A B L E S 19.4 Microphone and Musical Instruent Cable Single-, High-Ipedance Cables High-Conductivity Copper 25 AWG Stranded (7x33) Coposite Copper (3) Strands TC, (4) Strands TCCS TC Spiral Shield (90% Coverage) PVC Insulation Matte Gray PVC Jacket Lengths Color Cond. Code 1000 VDC, 60 C N/A Insulation Thickness Jacket Thickness OD Capacitance * * ** ** 25 AWG Stranded (7x33) Coposite Copper Rayon Braid + TC Braid Shield (80% Coverage) Cotton Serve EPDM Rubber Insulation Cotton Serve Black EPDM Rubber Jacket 3000 VDC, 60 C N/A AWG Stranded (27x34) High-conductivity TC Conductive Textile (100%) plus TC Spiral Shields (95% Coverage) Paper Tape EPDM Rubber Insulation Black Neoprene Jacket 60 C N/A AWG Stranded (26x34) High-conductivity TC Conductive Textile (100%) plus TC Spiral Shields (75% Coverage) Paper Tape EPDM Rubber Insulation Black Neoprene Jacket 60 C N/A AWG Stranded (41x34) High-conductivity TC Conductive Textile (100%) plus TC Spiral Shields (68% Coverage) Paper Tape EPDM Rubber Insulation Black Neoprene Jacket 600V RMS, 60 C N/A EPDM = Ethylene Propylene Diene Monoer TC = Tinned Copper TCCS = Tinned Copper-covered Steel *Capacitance between conductors. **Capacitance between center conductor and outer shield. (3) Strands TC, (4) Strands TCCS. For ore inforation, contact Belden Technical Support: BELDEN-1

3 B R I L L I A N C E B R O A D C A S T C A B L E S 19.5 Microphone and Musical Instruent Cable Two-, Low-Ipedance Cables High-Conductivity Copper 24 AWG Stranded (105x44) High-conductivity Bare Copper s Double Bare Copper Spiral Shield (97% Coverage) PVC Insulation Matte Black PVC Jacket Lengths Color Cond. Code 300V RMS 80 C White, Green Insulation Thickness Jacket Thickness OD Capacitance * * ** ** 19 Brilliance Broadcast 24 AWG Stranded (45x40) TC Alloy s Conductive Textile Wrap (100% Coverage) TC Braid Shield (56% Coverage) Cotton Spiral EPDM Rubber Insulation Black EPDM Jacket 300V RMS 90 C White, Black U-500 U AWG Stranded (45x40) BC Alloy s Conductive Textile Wrap (100% Coverage) TC Braid Shield (65% Coverage) Cotton Spiral EPDM Rubber Insulation Brown EPDM Jacket 300V RMS 90 C Blue, Red 24 AWG Stranded (42x40) High-conductivity BC s TC French Braid Shield (95% Coverage) BC Drain Wire Datalene Insulation Matte PVC Jacket (Available in Red, Yellow, Green, Blue, Gray or Black) Digital MIC Cable 1800F NEC: 2 Black, High-Flex 110 Oh CL2R Red U-1000 U AES/EBU 300V RMS 60 C French Braid 500 ft. and 1000 ft. put-ups available in Black only. 24 AWG Stranded (42x40) High-conductivity BC s Double Bare Copper Spiral Shield (95% Coverage) PVC Insulation PVC Inner Jacket Matte PVC Outer Jacket (Available in Red, Yellow, Green, Blue or Black) 100V RMS 60 C 1812A 2 Brown, White ft. put-up not available in Green. BC = Bare Copper EPDM = Ethylene Propylene Diene Monoer TC = Tinned Copper *Capacitance between conductors. **Capacitance between one conductor and other conductors connected to shield. s cabled with fillers. Not RoHS copliant at tie printing. Please check with Belden Technical Support for current copliance inforation at BELDEN-1. Datalene insulation features include a low dielectric constant and a low dissipation factor for high-speed, low-distortion data handling. Physical properties include good crush resistance and light weight. For ore inforation, contact Belden Technical Support: BELDEN-1

4 B R I L L I A N C E B R O A D C A S T C A B L E S 19.6 Microphone and Musical Instruent Cable Two-, Low-Ipedance Cables High-Conductivity Copper Lengths Color Cond. Code 24 AWG Stranded (19x36) HC TC s Twisted Pair Noise Reducing Tape Beldfoil Shield (100% Coverage) TC Drain Wire High-density Polyethylene Insulation Black PVC Jacket 200V RMS 75 C Black, U-500 U Red U-1000 U Shorting Fold Insulation Thickness Jacket Thickness OD Capacitance * * ** ** 24 AWG Stranded (27x38) High-conductivity Bare Copper s Bare Copper Spiral Shield (92% Coverage) PVC Insulation Black Matte PVC Jacket 100V RMS 60 C 1813A 2 Red, Blue AWG Stranded (16x34) High-conductivity Tinned Copper s Cotton Braid Double TC Braid Shield (85% Coverage) Polyethylene Insulation Chroe PVC Jacket 1000V RMS 80 C Clear, Black U-1000 U AWG Stranded (26x34) High-conductivity TC s Rayon Braid TC Braid Shield (85% Coverage) Cotton Wrap EPDM Rubber Insulation EPDM Jacket (Available in Black, Red, Yellow or Blue) 600V RMS 90 C White, Black U-500 U U-1000 U Red, Yellow or Blue available in 1000 ft. put-up only EPDM Rubber Insulation Brown Hypalon Jacket 600V RMS 60 C White, VW-1 Black U-1000 U AWG Stranded (41x34) High-conductivity TC s Rayon Braid TC Braid Shield (85% Coverage) Cotton Wrap EPDM Rubber Insulation Black Neoprene Jacket 600V RMS 60 C White, Black U-500 U AWG Stranded (65x34) High-conductivity TC s Rayon Braid Paper Wrap TC Braid Shield (85% Coverage) Cotton Wrap EPDM Rubber Insulation Brown Hypalon Heavy-duty Jacket 600V RMS 60 C Black, VW-1 White BC = Bare Copper EPDM = Ethylene Propylene Diene Monoer HC = High-conductivity TC = Tinned Copper *Capacitance between conductors. **Capacitance between one conductor and other conductors connected to shield. Hypalon is a DuPont tradeark. For ore inforation, contact Belden Technical Support: BELDEN-1

5 B R I L L I A N C E B R O A D C A S T C A B L E S 19.7 Microphone and Musical Instruent Cable Three-, Low-Ipedance Cables High-Conductivity Copper 24 AWG Stranded (105x44) High-conductivity Bare Copper s Double Bare Copper Spiral Shield (97% Coverage) PVC Insulation Matte Black PVC Jacket Lengths Color Cond. Code 300V RMS 80 C White, Green, Brown Insulation Thickness Jacket Thickness OD Capacitance * * ** ** 19 Brilliance Broadcast 24 AWG Stranded (45x40) TC Alloy s Conductive Textile Wrap (100% Coverage) TC Braid Shield (60% Coverage) EPDM Rubber Insulation Black EPDM Rubber Jacket 300V 90 C Black, Red, White 24 AWG Stranded (19x32) High-conductivity Tinned Copper s Rayon Braid TC Braid Shield (89% Coverage) Polyethylene Insulation Chroe PVC Jacket 600V RMS 80 C Clear, VW-1 Black, Red 20 AWG Stranded (26x34) High-conductivity TC s Rayon Braid TC Braid Shield (85% Coverage) Cotton Wrap EPDM Rubber Insulation Black EPDM Jacket 600V RMS 90 C White, Black, Red EPDM = Ethylene Propylene Diene Monoer TC = Tinned Copper *Capacitance between conductors. **Capacitance between one conductor and other conductors connected to shield. Not RoHS copliant at tie printing. Please check with Belden Technical Support for current copliance inforation at BELDEN-1. For ore inforation, contact Belden Technical Support: BELDEN-1

6 B R I L L I A N C E B R O A D C A S T C A B L E S 19.8 Microphone and Musical Instruent Cable Four- Star Quad, Low-Ipedance Cables High-Conductivity Copper Lengths Color Cond. Code Insulation Thickness Jacket Thickness OD 28 AWG Stranded (19x40) High-conductivity Silver-plated Copper Alloy s Tinned Copper Braid Shield (78% Coverage) Polypropylene Insulation Matte PVC Jacket (Available in Red, Yellow, Blue, Beige or Black) Capacitance Mini Star Quad 1804A 4 Blue/White, V RMS 60 C White/Blue * * ** ** 100 ft. put-up available in Black only. May contain ore than one piece. Min. length any one piece is 50 ft. One Blue conductor and one White conductor are striped for use in MIDI and other four conductor applications. 2/c 25 AWG equivalent DCR when connected to a 3-pin XLR. 26 AWG Stranded (30x40) High-conductivity BC s TC French Braid Shield (95% Coverage) BC Drain Wire Polyethylene Insulation Matte PVC Jacket (Available in Red, Green, Yellow, Blue, Gray or Black) 100V RMS 60 C 1172A 4 Blue/White, White/Blue French Braid 500 ft. put-up available in Black only. One Blue conductor and one White conductor are striped for use in MIDI and other four conductor applications. 2/c 23 AWG equivalent DCR when connected to a 3-pin XLR. 24 AWG Stranded (42x40) High-conductivity Bare Copper s Tinned Copper Braid Shield (95% Coverage) Polyethylene Insulation Matte PVC Jacket (Available in Red, Green, Yellow, Blue, Gray or Black) 100V RMS 75 C 1192A 4 Blue/White, White/Blue ft. put-up available in Black only. 500 ft. put-up available in Blue or Black only. One Blue conductor and one White conductor are striped for use in MIDI and other four conductor applications. 2/c 21 AWG equivalent DCR when connected to a 3-pin XLR. 20 AWG Stranded (19x32) High-conductivity Tinned Copper s Rayon Braid Tinned Copper Braid Shield (85% Coverage) Polyethylene Insulation Chroe PVC Jacket UL AWM Style Clear, (300V RMS 60 C) Black, VW-1 Red, U-1000 U Green /c 17 AWG equivalent DCR when connected to a 3-pin XLR. 20 AWG Stranded (26x34) High-conductivity Tinned Copper s Rayon Braid TC Braid Shield (85% Coverage) Cotton Wrap EPDM Rubber Insulation Black EPDM Rubber Jacket 600V RMS 90 C Black, White, Red, U-500 U Green /c 17 AWG equivalent DCR when connected to a 3-pin XLR AWG Stranded (65x34) High-conductivity Tinned Copper s Rayon Braid TC Braid Shield (85% Coverage) Cotton Wrap EPDM Rubber Insulation Black Neoprene Jacket 600V RMS 60 C Black, VW-1 White, Red, Green 2/c 13 AWG equivalent DCR when connected to a 3-pin XLR. BC = Bare Copper EPDM = Ethylene Propylene Diene Monoer TC = Tinned Copper Quad connection schee: The two blue wires (or wires directly opposite one another) are connected together to for one conductor, and siilarly the two white wires (or reaining *Capacitance between conductors. **No. capacitance between conductors in a Quad configuration. wires) are connected together to for the second conductor. Not RoHS copliant at tie printing. Please check with Belden Technical Support for current copliance inforation at BELDEN-1. For ore inforation, contact Belden Technical Support: BELDEN-1

7 B R I L L I A N C E B R O A D C A S T C A B L E S 19.9 Line Level Analog Audio Cable Single-Pair Cables Belden analog audio cables are used for connecting line level audio equipent in either peranent or sei-peranent installations. They consist one or two individually foil-shielded, twisted pairs. Once installed, they are not intended to be oved while in service. For cables that are in otion during use, refer to the Microphone and Musical Instruent Cable section in this catalog. Belden s analog audio cable fering consists a selection designs to handle a variety audio applications. Belden part no utilizes a paper tape separator to facilitate easy long length jacket stripping. no coes with a bonded Beldfoil shield so that the shield and jacket strip siultaneously. A special atte PVC jacket aterial is eployed on part no. 1508A aking it a highly flexible construction. Double pair cables are available in a round construction (part no. 8723) or in a ZIP cord style (part no. 1504A) for easy separation in two-channel or stereo hook-ups. 19 Brilliance Broadcast 24 AWG Stranded (7x32) TC s Twisted Pair Overall Beldfoil Shield (100% Coverage) 24 AWG Stranded TC Drain Wire Polypropylene Insulation PVC Jacket (Available in Brown, Red, Green, Lt. Blue, Purple, Gray, White or Black) 300V RMS 60 C 1883A NEC: 1 Black, U-1000 U CMR Red Z-Fold CEC: CMG FT ft. put-up available in Gray only. Jacket and shield are bonded so both can be reoved with autoatic stripping equipent. Polyolefin Insulation Black Matte PVC Jacket High-Flex 1508A NEC: 1 Black, V RMS 60 C CM Red CEC: CM Lengths Color Pairs Code Jacket and shield are bonded so both can be reoved with autoatic stripping equipent. Insulation Thickness Jacket Thickness OD Capacitance * * ** For cross-connect use with 1408R (et al.) Snake Cables, see page For cross-connect use with 1408R (et al.) Snake Cables, see page ** 24 AWG Stranded (7x32) TC s Twisted Pair Overall Beldfoil Shield (100% Coverage) 24 AWG Stranded TC Drain Wire Polyethylene Insulation Chroe PVC Jacket Low-Capacitance 8641 NEC: 1 Black, UL AWM Style 2092 CM Clear U-500 U (300V RMS 60 C) CEC: CM U-1000 U For Plenu versions 8641, see or Plenu FEP Insulation Red FEP Jacket 300V RMS 200 C, Non-conduit NEC: 1 Black, CMP Red CEC: CMP FT6 Plenu FEP Insulation Natural Flaarrest Jacket 300V RMS 60 C, Non-conduit NEC: 1 Black, U-1000 U CMP Red CEC: CMP FT6 FEP = Fluorinated Ethylene Propylene TC = Tinned Copper *Capacitance between conductors. **Capacitance between one conductor and other conductors connected to shield. Spools and/or UnReel cartons are one piece, but length ay vary ±10% for spools and ±5% for UnReel fro length shown. Length ay vary ±10% for UnReel. For ore inforation, contact Belden Technical Support: BELDEN-1

8 B R I L L I A N C E B R O A D C A S T C A B L E S Line Level Analog Audio Cable Single-Pair Cables Lengths Color Pairs Code 22 AWG Stranded (7x30) TC s Twisted Pair Overall Beldfoil Shield (100% Coverage) 24 AWG Stranded TC Drain Wire Polypropylene Insulation PVC Jacket (Available in Brown, Red, Orange, Yellow, Green, Blue, Purple, Gray, White or Black) 300V RMS 60 C 1266A NEC: 1 Black, U-1000 U CM Red CEC: CM 1000 ft. put-up available in Black only. Unique design features lower capacitance and greater flexibility than standard audio pair constructions. PVC Insulation PVC Jacket (Available in Brown, Red, Orange, Yellow, Green, Blue, Purple, Gray, White or Black) 300V RMS 90 C 1503A NEC: 1 Black, U-1000 U CM Red CEC: CM Insulation Thickness Jacket Thickness OD Capacitance * * ** ** 22 AWG Stranded (7x30) TC s Twisted Pair Overall Beldfoil Shield (100% Coverage) 22 AWG Stranded TC Drain Wire Polypropylene Insulation Paper Wrap Gray or Black PVC Jacket 300V RMS 75 C 8451 NEC: 1 Black, CMR Red U-500 U CEC: CMG FT4 U-1000 U Z-Fold ft. put-up available in Black only. Unique paper separator facilitates jacket stripping. Polypropylene Insulation PVC Jacket (Available in Brown, Red, Orange, Yellow, Green, Blue, Purple, Gray, White or Black) 300V RMS 75 C 9451 NEC: 1 Black, U-500 U CMR Red CEC: T-1000 T CMG FT4 U-1000 U U-500 ft., 500 ft. and T-1000 ft. put-ups available in Gray only. The jacket and shield are bonded so both can be reoved on autoatic stripping equipent. Drain wire is inside foil shield. Polypropylene Insulation Black Low-Soke, Zero-Halogen Jacket LSZH and ABS Approved 9451SB NEC: 1 Black, V RMS 105 C u CMG-LS Red CEC: CMG-LS FT4 Liited Soke The jacket and shield are bonded so both can be reoved on autoatic stripping equipent. Drain wire is inside foil shield. Plenu FEP Insulation Flaarrest Jacket (Brown, Red, Orange, Yellow, Green, Blue, Purple, Gray, White or Black) 300V RMS 60 C 9451P NEC: 1 Black, U-1000 U u CMP Red CEC: CMP FT6 The jacket and shield are bonded so both can be reoved on autoatic stripping equipent. Drain wire is inside foil shield. For cross-connect use with 1814R (et al.) Snake Cables, see page AWG Solid Tinned Copper s Twisted Pair Overall Beldfoil Shield (100% Coverage) 22 AWG Solid TC Drain Wire Polypropylene Insulation Gray or Black PVC Jacket 300V RMS 75 C 8450 NEC: 1 Black, U-500 U CM Red U-1000 U CEC: CM Z-Fold U-500 ft. and U-1000 ft. put-ups available in Black only. Belden s Miniature Broadcast Audio and Instruentation Cables occupy 1/2 to 2/3 less space than standard cables. FEP = Fluorinated Ethylene Propylene TC = Tinned Copper *Capacitance between conductors. **Capacitance between one conductor and other conductors connected to shield. For ore inforation, contact Belden Technical Support: BELDEN-1

9 B R I L L I A N C E B R O A D C A S T C A B L E S Line Level Analog Audio Cable Single-Pair Cables 22 AWG Stranded (7x30) TC s Twisted Pair Overall Beldfoil Shield (100% Coverage) 22 AWG Stranded TC Drain Wire Polyethylene Insulation Chroe PVC Jacket Lengths Color Pairs Code Low-Capacitance 8761 NEC: 1 Black, U-500 U UL AWM Style 2092 CM Clear (300V RMS 60 C) CEC: U-1000 U CM Z-Fold Plenu FEP Insulation Red FEP Jacket For Plenu versions 8761, see 88761, or V RMS 200 C NEC: 1 Black, CMP Red U-500 U CEC: CMP FT6 U-1000 U Z-Fold Plenu FEP Insulation Red Fluorocopolyer Jacket 300V RMS 150 C NEC: 1 Black, CMP Red CEC: CMP FT6 Insulation Thickness Jacket Thickness OD Capacitance * * ** ** 19 Brilliance Broadcast Z-Fold Plenu FEP Insulation Natural Flaarrest Jacket 300V RMS 75 C NEC: 1 Black, U-500 U CMP Red U-1000 U CEC: CMP FT6 Z-Fold Polyethylene Insulation Chroe PVC Jacket Low-Capacitance 9461 NEC: 1 Black, U-500 U UL AWM Style 2092 CM Clear U-1000 U (300V RMS 60 C) CEC: CM The jacket and shield are bonded so both can be reoved on autoatic stripping equipent. 22 AWG Stranded (7x30) Tinned Copper s Twisted Pair Tinned Copper Spiral Wrapped Shield (85% Coverage) PVC Insulation Chroe PVC Jacket UL AWM Style NEC: 1 Black, U-500 U (300V RMS 80 C) CMG Red CEC: U-1000 U CMG FT FEP = Fluorinated Ethylene Propylene TC = Tinned Copper * Capacitance between conductors. ** Capacitance between one conductor and other conductors connected to shield. Spools and/or UnReel cartons are one piece, but length ay vary ±10% for spools and ±5% for UnReel fro length shown. Length ay vary -10% to +20% and ay contain 2 pieces. Miniu length any piece is 1500 ft. Length ay vary ±10% for UnReel cartons. Length ay vary -10% to +5% fro length shown. For ore inforation, contact Belden Technical Support: BELDEN-1

10 B R I L L I A N C E B R O A D C A S T C A B L E S Line Level Analog Audio Cable Double-Pair Cables 22 AWG Stranded (7x30) TC s Twisted Pairs Individual Beldfoil Shield (100% Coverage) Stranded TC Coon Drain Wire Polypropylene Insulation Chroe PVC Jacket (Pairs Cabled on Coon Axis to Reduce Diaeter) 300V RMS 60 C 8723 NEC: 2 Red/Black, CM Green/White U-500 U CEC: CM U-1000 U Z-Fold For Plenu versions 8723, U-2000 U see 88723, or Polypropylene Insulation Black Low-Soke, Zero-Halogen Jacket (Pairs Cabled on Coon Axis to Reduce Diaeter) LSZH and ABS Approved 8723SB NEC: 2 Red & V RMS 60 C u CMG-LS Black, CEC: Green & CMG-LS FT4 White Liited Soke Z-Fold Lengths Color Pairs Code Insulation Thickness Jacket Thickness OD Capacitance * * ** ** Polypropylene Insulation Black Low-Soke, Zero-Halogen Jacket LSZH and ABS Approved 8777SB NEC: 3 See V RMS u CMG-LS Chart 3 CEC: (Tech Info CMG-LS FT4 Section) Liited Soke Z-Fold Plenu FEP Insulation Red FEP Jacket (Pairs Cabled on Coon Axis to Reduce Diaeter) 300V RMS 200 C NEC: 2 Red/Black, CMP Green/White CEC: CMP FT6 Z-Fold Plenu FEP Insulation Red Fluorocopolyer Jacket (Pairs Cabled on Coon Axis to Reduce Diaeter) 300V RMS 150 C NEC: 2 Red/Black, CMP Green/White CEC: CMP FT6 Z-Fold Plenu FEP Insulation Natural Flaarrest Jacket (Pairs Cabled on Coon Axis to Reduce Diaeter) 300V RMS 75 C NEC: 2 Red/Black, U-500 U CMP Green/White U-1000 U CEC: CMP FT6 U-2000 U Z-Fold FEP = Fluorinated Ethylene Propylene TC = Tinned Copper *Capacitance between conductors. **Capacitance between one conductor and other conductors connected to shield. Spools and/or UnReel cartons are one piece, but length ay vary ±10% for spools and ±5% for UnReel fro length shown. For ore inforation, contact Belden Technical Support: BELDEN-1

11 B R I L L I A N C E B R O A D C A S T C A B L E S Line Level Analog Audio Cable Single- and Double-Pair Cables Lengths Color Pairs Code 22 AWG Stranded (19x34) TC s Dual Twisted Pairs Overall Beldfoil Shield (100% Coverage) 24 AWG Stranded TC Drain Wire PVC Insulation PVC Jacket in Zip-Cord Construction (Red & Green, Red & Black, Red & Purple or Red & Gray) 150V RMS 60 C 1504A NEC: 2 Black, U-1000 U CM Red x x CEC: CM Insulation Thickness Jacket Thickness OD Capacitance * * ** ** 19 Brilliance Broadcast 2000 ft. put-up available in Red & Gray or Red & Green only. The jacket and shield are bonded so both can be reoved on autoatic stripping equipent. Drain wire is inside foil shield. 22 AWG Stranded (7x30) TC s Dual Twisted Pairs Overall Beldfoil Shield (100% Coverage) 22 AWG Stranded TC Drain Wire Polyolefin Insulation PVC Jacket in Zip-Cord Construction (Red & Green, Red & Gray, Red & Black or Red & Purple) 300V RMS 105 C 9451D NEC: 2 Black, U-1000 U CMR Red x x CEC: CMG FT ft. put-up available in Red & Green only. The jacket and shield are bonded so both can be reoved on autoatic stripping equipent. Drain wire is inside foil shield. Plenu FEP Insulation White Flaarrest Jacket in Zip-Cord Construction 300V RMS 60 C 9451DP NEC: 2 Black & u CMP Red, x x CEC: Black & CMP FT6 White The jacket and shield are bonded so both can be reoved on autoatic stripping equipent. Drain wire is inside foil shield. 20 AWG Stranded (7x28) TC s Twisted Pair Overall Beldfoil Shield (100% Coverage) 20 AWG Stranded TC Drain Wire PVC Insulation Beige PVC Jacket UL AWM Style NEC: 1 Black, U-500 U (300V RMS 80 C) CMG Red CEC: U-1000 U CMG FT Z-Fold 9154 has 22 AWG stranded tinned copper drain wire. Polyethylene Insulation Chroe PVC Jacket UL AWM Style NEC: 1 Black, (300V RMS 60 C) CM Clear CEC: U-500 U CM U-1000 U Shorting Fold UL AWM Style NEC: 1 Black, U-500 U (300V RMS 60 C) CM Clear U-1000 U CEC: CM The jacket and shield are bonded so both can be reoved on autoatic stripping equipent. Drain wire is on the inside foil shield. 20 AWG Stranded (7x28) Tinned Copper s Twisted Pair Tinned Copper Spiral Wrapped Shield (89% Coverage) PVC Insulation Chroe PVC Jacket UL AWM Style NEC: 1 Black, U-500 U (300V RMS 80 C) CMG Red U-1000 U CEC: CMG FT4 FEP = Fluorinated Ethylene Propylene TC = Tinned Copper *Capacitance between conductors. **Capacitance between one conductor and other conductors connected to shield. For ore inforation, contact Belden Technical Support: BELDEN-1

12 B R I L L I A N C E B R O A D C A S T C A B L E S Line Level Analog Audio Cable Single-Pair Cables 18 AWG Stranded (16x30) TC s Twisted Pair Overall Beldfoil Shield (100% Coverage) 20 AWG Stranded TC Drain Wire Polyethylene Insulation Chroe PVC Jacket Lengths Color Pairs Code Low-Capacitance 9460 NEC: 1 Black, U-500 U UL AWM Style 2092 CM Clear U-1000 U (300V RMS 60 C) CEC: CM Insulation Thickness Jacket Thickness OD Capacitance * * ** ** The jacket and shield are bonded so both can be reoved on autoatic stripping equipent. Drain wire is on the inside foil shield. Low-Capacitance 8760 NEC: 1 Black, UL AWM Style 2092 CM Clear U-500 U (300V RMS 60 C) CEC: Shorting Fold CM U-1000 U AWG Stranded (19x30) TC s Twisted Pair Overall Beldfoil Shield (100% Coverage) 20 AWG Stranded TC Drain Wire Plenu FEP Insulation Red FEP Jacket 300V RMS 200 C NEC: 1 Black, CMP Red U-500 U CEC: CMP FT6 U-1000 U Z-Fold Plenu FEP Insulation Red Fluorocopolyer Jacket 300V RMS 150 C NEC: 1 Black, U-500 U CMP Red CEC: CMP FT6 Z-Fold Plenu FEP Insulation Natural Flaarrest Jacket 300V RMS 75 C NEC: 1 Black, U-500 U CMP Red U-1000 U CEC: CMP FT6 Z-Fold For Plenu versions 8760, see 88760, or AWG Stranded (7x26) Tinned Copper s Twisted Pair Tinned Copper Spiral Wrapped Shield (85% Coverage) PVC Insulation Chroe PVC Jacket 300V RMS 60 C 8790 NEC: 1 Red, U-500 U CMG White CEC: U-1000 U CMG FT FEP = Fluorinated Ethylene Propylene TC = Tinned Copper *Capacitance between conductors. **Capacitance between one conductor and other conductors connected to shield. Spools and/or UnReel cartons are one piece, but length ay vary ±10% for spools and ±5% for UnReel fro length shown. Spools and/or UnReel cartons are one piece, but length ay vary -0% to +10%. For ore inforation, contact Belden Technical Support: BELDEN-1

13 B R I L L I A N C E B R O A D C A S T C A B L E S Line Level Analog Audio Cable Single-Pair Cables 16 AWG Stranded (19x29) Tinned Copper s Twisted Pair Tinned Copper Spiral Wrapped Shield (85% Coverage) PVC Insulation Chroe PVC Jacket Lengths Color Pairs Code 300V RMS 60 C 8780 NEC: 1 Black, CMG White U-1000 U CEC: CMG FT4 Insulation Thickness Jacket Thickness OD Capacitance * * ** ** 19 Brilliance Broadcast 16 AWG Stranded (19x29) TC s Twisted Pair Overall Beldfoil Shield (100% Coverage) 18 AWG Stranded TC Drain Wire Polyethylene Insulation Chroe PVC Jacket Low-Capacitance 8719 NEC: 1 Black, U-500 U UL AWM Style CM, CL2 Clear (600V RMS 80 C) CEC: U-1000 U CM Shorting Fold AWG Stranded (19x27) TC s Twisted Pair Overall Beldfoil Shield (100% Coverage) 16 AWG Stranded TC Drain Wire Polyethylene Insulation Chroe PVC Jacket Low-Capacitance 8720 NEC: 1 Black, U-500 U UL AWM Style CL2 Clear (600V RMS 80 C) Z-Fold 12 AWG Stranded (19x25) TC s Twisted Pair Overall Beldfoil Shield (100% Coverage) 14 AWG Stranded TC Drain Wire Polyethylene Insulation Chroe PVC Jacket Low-Capacitance 8718 NEC 1 Black, U-500 U UL AWM Style CL2 Clear (600V RMS 80 C) Z-Fold TC = Tinned Copper *Capacitance between conductors. **Capacitance between one conductor and other conductors connected to shield. Final put-up length ay vary -10% to +20% fro length shown. May contain 2 pieces. Miniu length any one piece is 1500 ft. For ore inforation, contact Belden Technical Support: BELDEN-1

14 B R I L L I A N C E B R O A D C A S T C A B L E S Analog Multi-Pair Snake Cable High-Flex and NEC Rated Cables Especially designed for the broadcast industry, Belden s full faily ulti-pair audio Snake cables feature options and construction for virtually every application. Applications Snake cables are used to connect ultiple audio channels in low-level (icrophone) and high-level (line) coponentry such as console board equipent for recording studios, radio television stations, postproduction facilities, and sound syste installations. With Belden s individually shielded and jacketed snakes, pairs can be split out the overall jacket for any length and connectorized directly without the need for heat shrink tubing or costly and tie-consuing preparation. 22 AWG and 24 AWG sizes are also ideal for punch down connector applications. Nubered and Color Coded Jacketed pairs are individually nubered and color coded (following the failiar resistor color code) for easy identification. Low-Capacitance Design Belden s 1200 Series Snake Cables feature a low-capacitance design in a flexible, high-perforance construction. New French Braid Shield Belden s patented French Braid shield is a double spiral (double serve) bare copper shield with the two spirals tied together by one weave. This iproves flex life over standard spiral shields, iproves flexibility over conventional braid shields, and lowers icrophonic or triboelectric noise. The French Braid is easy to terinate since it is not fully woven. It also provides for lower DC loop resistance than a single spiral braid. The French Braid is featured on Belden s FleXnake Cables (1900 Series) and Quad Snake Cables (7880 Series). How to Choose a Snake Cable Peranent Installations For installed jobs, where you ust have an NEC rating, choose your preferred pair-count fro within one the following Belden snake cable series: 1400R Series Page CMR Rated 24 AWG Individually Shielded and Jacketed Pairs 1500C Series Page Flexible, CM Rated 24 AWG Individually Shielded and Jacketed Pairs 1800R Series Page CMR Rated 22 AWG Individually Shielded and Jacketed Pairs / Series Page CM Rated 22 AWG Individually Shielded Pairs Series Page CMP Rated (Plenu-Rated) 22 AWG Individually Shielded Pairs 6540PA Series Page CMP Rated (Plenu-Rated) 22 AWG Individually Shielded Pairs Teporary Installations or Field Use For non-installed jobs, where cable flexibility is ore iportant than NEC rating, choose your preferred pair-count fro these snake cables series: 1500C Series Page Flexible, CM Rated 24 AWG Individually Shielded and Jacketed Pairs 1200B Series Page Flexible, Low-Capacitance 22 AWG Individually Shielded and Jacketed Pairs 1900A Series Page Super-Flexible 24 AWG Individually Shielded and Jacketed Pairs with French Braid Shield 7880A Series Page Super-Flexible Star Quads 26 AWG Individually Shielded and Jacketed Quads with French Braid Shield For AES/EBU Digital Multi-Snake Cables See Pages For ore inforation, contact Belden Technical Support: BELDEN-1

15 B R I L L I A N C E B R O A D C A S T C A B L E S Analog Multi-Quad Snake Cable Super-Flexible, High-Perforance Cables Individually Shielded and Jacketed Quads Individually Shielded and Jacketed Quads Not NEC Rated Product 26 AWG* stranded (19x38) bare copper conductor. Polyethylene insulation. Quads individually shielded with bare copper French Braid, each quad with 26 AWG tinned copper drain wire. Color-coded PVC inner jackets (see table below) with overall Matte Black PVC jacket and 20 AWG tinned copper drain wire. Color Code: Blue, White, Blue w/white stripe, White w/blue stripe. Specifications OD OD Insulation Inner Quad Jacket OD DCR Shield (Inner Pair) Voltage Rating.020 (.51).045 (1.14).157 (3.99) 36.0 Ω/M (11.8 Ω/k) 6.8 Ω/M (2.23 Ω/k) 100V RMS Teperature Rating 60 C Ipedance 40Ω Velocity Propagation 66% Capacitance Between s and Shield 39 (129 ) Between s in Quad Config. 57 (188 ) DCR = DC Resistance *22 AWG equivalent DCR when connected to a 3-pin XLR Quads Lengths OD Super-Flexible Quads 26 AWG 7884A A A A A A Length ay vary -10% to +0% fro length shown. 19 Brilliance Broadcast French Braid Inner Jacket Colors: Quad Jacket Color 1 Brown 2 Red 3 Orange 4 Yellow 5 Green 6 Blue 7 Purple Quad Jacket Color 8 Gray 9 White 10 Black 11 Beige 12 Pink Gray (nubered) For ore inforation, contact Belden Technical Support: BELDEN-1

16 B R I L L I A N C E B R O A D C A S T C A B L E S Analog Multi-Pair Snake Cable CMR Rated Cables Individually Shielded and Jacketed Twisted Pairs Individually Shielded and Jacketed Pairs NEC: CMR (CEC: CMG FT4) Product 24 AWG stranded (7x30) tinned copper conductor. Polyolefin insulation. Twisted pairs individual Beldfoil shield (100% Coverage) and have nubered and color-coded PVC jackets (see Chart 7 in Technical Inforation Section for colors). Pair jackets and shields are bonded so both strip siultaneously with autoatic stripping equipent. Overall Beldfoil shield and 18 AWG tinned copper drain wire, plus overall Black PVC jacket and nylon rip cord. Color Code: Red, Black. Specifications OD OD Insulation Inner Pair Jacket OD Approvals NEC CEC DCR Shield (Inner Pair) Voltage Rating.024 (.61).040 (1.02).111 (2.82) CMR CMG FT4 23.3Ω/M (76.4Ω/k) 15.9Ω/M (52.1Ω/k) 300V RMS Teperature Rating 75 C Ipedance 50Ω Velocity Propagation 66% Capacitance Between s 31 (102 ) Between /Shield* 58 (191 ) DCR = DC Resistance *Capacitance between one conductor and other conductors connected to shield. Pairs Lengths OD CMR Rated Twisted Pairs NEC: CMR (CEC: CMG FT4) 24 AWG 1408R R R R R R R R R For ore inforation, contact Belden Technical Support: BELDEN-1

17 B R I L L I A N C E B R O A D C A S T C A B L E S Analog Multi-Pair Snake Cable Flexible, CM Rated Cables Individually Shielded and Jacketed Twisted Pairs Individually Shielded and Jacketed Pairs NEC: CM (CEC: CM) Product 24 AWG stranded (7x32) tinned copper conductor. Polyolefin insulation. Twisted pairs individual Beldfoil shield (100% coverage) and have nubered and color-coded PVC jackets (see Chart 7 in Technical Inforation Section for colors). Jackets and shields are bonded so both strip siultaneously. Overall Beldfoil shield and 24 AWG tinned copper drain wire, plus overall Matte Black PVC jacket and nylon rip cord. Color Code: Red, Black. Specifications OD OD Insulation Inner Pair Jacket OD Approvals NEC CEC DCR Shield (Inner Pair) Voltage Rating.024 (.61).040 (1.02).111 (2.82) CM CM 23.3Ω/M (76.4Ω/k) 15.9Ω/M (52.2Ω/k) 300V RMS Teperature Rating 75 C Ipedance 50Ω Velocity Propagation 66% Capacitance Between s 31 (102 ) Between /Shield* 58 (191 ) DCR = DC Resistance *Capacitance between one conductor and other conductors connected to shield. Pairs Lengths OD Flexible, CM Rated Twisted Pairs NEC: CM (CEC: CM) 24 AWG 1509C C C C C (DT-12) C C C C C C Brilliance Broadcast For ore inforation, contact Belden Technical Support: BELDEN-1

18 B R I L L I A N C E B R O A D C A S T C A B L E S Analog Multi-Pair Snake Cable FleXnake Super-Flexible, High-Perforance Cables Individually Shielded and Jacketed Twisted Pairs Individually Shielded and Jacketed Pairs Not NEC Rated Product 24 AWG stranded (41x40) bare copper conductor. Polyolefin insulation. Twisted pairs individually shielded with double serve French Braid (93% coverage) with tinned copper drain wire. Pairs have nubered and color-coded PVC jackets (see Chart 7 in Technical Inforation Section for colors). Overall Black PVC jacket. Color Code: Red, Black. Specifications OD OD Insulation Inner Pair Jacket OD DCR Shield (Inner Pair) Voltage Rating.023 (.58).040 (1.02).119 (3.02) 25.5Ω/M (83.7Ω/k) 7.2Ω/M (23.6Ω/k) 300V RMS Teperature Rating 60 C Ipedance 60Ω Velocity Propagation 66% Capacitance Between s 26 (85 ) Between /Shield* 47 (154 ) DCR = DC Resistance *Capacitance between one conductor and other conductors connected to shield. Pairs Lengths OD FleXnake Super-Flexible Twisted Pairs 24 AWG 1902A A A A A A A A Length ay vary -10% to +0% fro length shown. French Braid For ore inforation, contact Belden Technical Support: BELDEN-1

19 B R I L L I A N C E B R O A D C A S T C A B L E S Analog Multi-Pair Snake Cable CMR Rated Cables Individually Shielded and Jacketed Twisted Pairs Individually Shielded and Jacketed Pairs NEC: CMR (CEC: CMG FT4) Product 22 AWG stranded (7x30) tinned copper conductor. Polyolefin insulation. Twisted pairs individual bonded Beldfoil shield and have nubered and color-coded PVC jackets (see Chart 7 in Technical Inforation Section for colors). Jackets and shields are bonded so both strip siultaneously. Overall Beldfoil shield plus overall Black PVC jacket and nylon rip cord. Color Code: Red, Black. Specifications OD OD Insulation Drain Wire Individual Pairs Overall: 1814R Overall: 1815R 1823R Inner Pair Jacket OD Approvals NEC CEC DCR Shield (Inner Pair) Voltage Rating.030 (.76).050 (1.27) 22 AWG 22 AWG 18 AWG.133 (3.38) CMR CMG FT4 14.8Ω/M (52.5Ω/k) 14.1Ω/M (46.3Ω/k) 300V RMS Teperature Rating 60 C Ipedance 50Ω Velocity Propagation 66% Capacitance Between s 31 (102 ) Between /Shield* 56 (184 ) DCR = DC Resistance *Capacitance between one conductor and other conductors connected to shield. Pairs Lengths OD CMR Rated Twisted Pairs NEC: CMR (CEC: CMG FT4) 22 AWG 1814R R R R R R R R R R Length ay vary -10% to +0% fro length shown. 19 Brilliance Broadcast For ore inforation, contact Belden Technical Support: BELDEN-1

20 B R I L L I A N C E B R O A D C A S T C A B L E S Analog Multi-Pair Snake Cable Flexible, Low-Capacitance Cables Individually Shielded and Jacketed Twisted Pairs Individually Shielded and Jacketed Pairs Not NEC Rated Product 22 AWG stranded (7x30) tinned copper conductor. Datalene insulation. Twisted pairs individual Beldfoil shield (100% Coverage) and have nubered and color-coded PVC jackets (see Chart 7 in Technical Inforation Section for colors). Pair jackets and shields are bonded so both strip siultaneously with autoatic stripping equipent. Overall Matte Black PVC jacket and nylon rip cord. Datalene insulation features include a low dielectric constant and a low dissipation factor for high-speed, low-distortion data handling. Physical properties include good crush resistance and light weight. Color Code: Red, Black. Specifications OD OD Insulation Inner Pair Jacket OD DCR Shield (Inner Pair) Voltage Rating.030 (.76).060 (1.52).153 (3.89) 15.0Ω/M (52.5Ω/k) 10.6Ω/M (34.8Ω/k) 150V RMS Teperature Rating 60 C Ipedance 70Ω Velocity Propagation 78% Capacitance Between s 19 (62 ) Between /Shield* 35 (115 ) DCR = DC Resistance *Capacitance between one conductor and other conductors connected to shield. Pairs Lengths OD Flexible, Low-Capacitance Twisted Pairs 22 AWG 1217B B B B B B B B B B B available by special order. Please contact Belden for lead tie. For ore inforation, contact Belden Technical Support: BELDEN-1

21 B R I L L I A N C E B R O A D C A S T C A B L E S Analog Multi-Pair Snake Cable CM Rated Cables Individually Shielded Twisted Pairs Individually Shielded Pairs NEC: CM (CEC: CM) Product 22 AWG stranded (7x30) tinned copper conductors. Polypropylene insulation. Twisted pairs individually Beldfoil shielded (100% Coverage). Overall Chroe PVC jacket and 22 AWG stranded tinned copper drain wire. Color Code: See Chart 3 (in Technical Inforation Section) Specifications OD.030 (.76) OD Insulation.050 (1.27) Approvals NEC CM CEC CM UL Ratings UL AWM Style 2919 Voltage Rating 30V RMS Teperature Rating 80 C DCR 15.0Ω/M (52.5Ω/k) Shield 10.6Ω/M (34.8Ω/k) Ipedance 50Ω Velocity Propagation 66% Capacitance Between s 30 (98 ) Between /Shield* 55 (180 ) DCR = DC Resistance *Capacitance between one conductor and other conductors connected to shield. Z-Fold Pairs Lengths CM Rated Twisted Pairs NEC: CM (CEC: CM) 22 AWG OD U-500 U U-1000 U For Plenu versions 8777, see 88777, or For Plenu versions 8778, see 88778, or Final put-ups ay vary -10 to +20% fro length shown, and ay contain 2 pieces. Miniu length any one piece will be 1500 ft. Spools are one piece, but length ay vary -0 to +20% fro length shown. 19 Brilliance Broadcast For ore inforation, contact Belden Technical Support: BELDEN-1