SM Se ries 800 W DC POWER SUP PLY

Transcription

1 P.O. Box AA Zierikzee The Netherlands Tel Fax DELTA ELEKTRONIKA B.V. SM 800 Se ries 800 W DC POWER SUP PLY Mod els Volt age range Cur rent range SM V 0 80 A SM V 0 50 A SM 70AR24 Autoranging out put SM 400AR4 Autoranging out put 0 35 V 0 70 V V V 0 24 A 0 12 A 0 4 A 0 2 A Features Functionalities De signed for long life at full power Ex cel lent dy namic re sponse to load changes Pro tected against all over load and short cir cuit con di tions EMC sur passes CE re quire ments: low emis sion & high im mu nity Low au di ble noise: fans are tem per a ture con trolled Avail able op tions: High Speed Pro gram ming, In ter faces, Ex tra Iso la tion, Se quencer, Dig i tal Encoders, Power Sink etc. Mas ter/slave par al lel and se ries op er a tion with volt age and cur rent shar ing Stack ing is al lowed, space be tween units is not re quired High power sys tem con fig u ra tion from mul ti ple units 19" rack mount ing or for lab o ra tory use (feet in cluded) Re mote sens ing In ter lock

2 DELTA ELEKTRONIKA BV SM800 Output volt age cur rent AUTORANGING (2 ranges) max. out put cur rent / volt age Input AC sin gle phase, Hz Power De rat ing vs in put: 90 V : P out max (W), I in (A) 100 V : P out max (W), I in (A) 110 V : P out max (W), I in (A) 230 V : P out max (W), I in (A) power fac tor, 100%, 50% load in ter nal fuses standby in put power (V o =I o =0) standby in put power (V o =V max ) Ef fi ciency AC 230 V in put, full load AC 115 V in put, max. load Reg u la tion Load 0 100% Line V AC (mea sured on sense block) Load 0 100% Line V AC (in ter nal volt age sense) Rip ple + noise rms (BW=300 khz) pp (BW=20 MHz) rms (BW=300 khz) pp (BW=20 MHz) rip ple at full load SM SM 1850 SM 70AR24 SM 400AR V 0 80 A no V 580, , , , , W 82 % 80 % 0.2 mv 0.2 mv 4 ma 1 ma 2.5 mv 10 mv 25 ma 120 ma 0 18 V 0 50 A no V Vo =16 V Vo =18 V 725, , , , , , , , , W 87 % 83 % 0.5 mv 0.2 mv 3 ma 1 ma 2 mv 8 mv 5 ma 25 ma 0 70 V 0 24 A yes 24 A / 035 V 12 A / 3570 V V 740, , , 9 840, , W V 0 4 A yes 4 A / 0200 V 2 A / V V 750, , , , , W 35 V / 70 V 200 V / 400 V 89 % 85 % 2 mv 0.5 mv 1.5 ma 1 ma 3 mv 3 / 1 ma 15 / 5 ma 89 % 86 % 10 mv 2 mv 0.5 ma 0.2 ma 80 mv 0.8 / 0.5 ma 3 / 1.5 ma Front panel con nec tion Not avail able Option 257 Option 258 Option 259 Load Reg u la tion: Load 0 100% Rip ple + noise rms (BW=300 khz) pp (BW=20 MHz) Temp. coeff., per C Sta bil ity af ter 1 hr warmup dur ing 8 hrs t amb = 25 ± 1 C, V in = 230 V AC (int. volt age sens ing for stab.) 3 mv 18 mv mv 4 mv 20 mv Analog Programming Programming inputs in put range ac cu racy off set temp. coeff. off set in put im ped ance Monitoring output out put range ac cu racy off set temp. coeff. off set out put im ped ance 0 5 V ± 0.2% mv (on 5V) 10 µv / C > 1 MOhm 0 5 V ± 0.2% mv (on 5V) 3 µv / C 2 Ohm / max. 4 ma 18 mv 150 mv 0 5 V ± 0.5% mv (on 5V) 50 µv / C > 1 MOhm 0 5 V ± 0.5% mv (on 5V) 60 µv / C 2 Ohm / max. 4 ma Ref er ence volt age on prog. con nec tor V ref TC +12 V out put V o on prog. Con nec tor I max R o V ± (Ro = 2 Ohm, max. 4 ma) 20 ppm 12 V ± 0.2 V 0.2 A 3 Ohm Page 1 2 SPECIFICATIONS Rev. Sept. 2012

3 SM800 DELTA ELEKTRONIKA BV Relay Outputs ACF DCF Status outputs sta tus LIM sta tus OT sta tus PSOL sta tus ACF sta tus DCF sta tus AC Fail DC Fail 1 ) both NO and NC con tact both NO and NC con tact op er a tion 5 V = logic 1 (R o = 500 Ohm) or limit 5 V = logic 1 (R o = 500 Ohm) Over Tem per a ture 5 V = logic 1 (R o = 500 Ohm) Power Sink Over load 5 V = logic 1 (R o = 500 Ohm) AC Fail 5 V = logic 1 (R o = 500 Ohm) DC Fail 2 ) 5 V = logic 1 (R o = 500 Ohm) Remote ShutDown with + 5V, 1 ma or re lay con tact 1 ) out put volt age ± 5% be yond set point 2 ) out put volt age ± 5% be yond set point In ter lock con tact at rear panel, see photo of rear panel on page 16 In di ca tors (front panel) Volt age me ter, Am pere me ter, ACFail, DCFail, Over Tem per a ture, Power Sink Over load, Re moteshut Down, Re mote, Re mote, Out put On, limit, limit, and mode Controls (front panel) Mains on/off switch, and potmeter, and limitpotmeter, Dis playset tings but ton, Dis playlim its but ton, Re mote/lo cal but ton, Out put On/Off but ton, Front panel Lock but tons. Programming speed Stan dard Ver sion Rise time (10 90%) Fall time (90 10%) Programming speed High speed Ver sion Rise time (10 90%) Fall time (90 10%) load load (rms/pp) Output capacitance SM SM 1850 SM 70AR24 SM 400AR V 6.5 ms 2.5 ms V 6.5 ms 62 ms SM Option P V 0.2 ms 0.2 ms V 0.2 ms 1 ms 20 / 80 mv 310 µf 0 16 V 12 ms 5 ms 16 0 V 12 ms 120 ms SM 1850 Option P V 0.22 ms 0.26 ms 16 0 V 1.95 ms 40 / 120 mv 200 µf Notes: All spec i fi ca tions re gard ing pro gram ming speed are typ i cal and mea sured on a re sis tive load V 6 ms 2.5 ms 0 70 V 10 ms 7 ms 35 0 V 6 ms 60 ms 70 0 V 25 ms 250 ms SM 70AR24 Option P V 0 70 V 35 0 V 0.27 ms 3 ms 70 0 V 0.85 ms 9.5 ms 35 V / 24 A 25 / 90 mv 70 V / 12 A 30 / 110 mv 80 µf V 4 ms 2 ms V 8 ms 5 ms V 4 ms 42 ms V 15 ms 155 ms SM 400AR4 Op tion P V 0.4 ms 0.3 ms V 0.82 ms 0.55 ms V 0.42 ms 4.6 ms V 1.7 ms 20 ms 200 V / 4 A 35 / 200 mv 400 V / 2 A 30 / 160 mv 4 µf Re cov ery time re cov ery within di/dt of load step out put volt age % load step max. de vi a 230 V AC in put volt age Output impedance, 01 khz, 1100 khz Pul sat ing load max. tol er a ble AC com po nent of load cur rent f > 1 khz f < 1 khz SM SM 1850 SM 70AR24 SM 400AR4 50 mv 1.25 A/µs 7 V 160 mv < 1 mω < 30 mω 15 Arms 80 Apeak 60 mv 0.9 A/µs 15 V 150 mv < 2 mω < 30 mω 15 Arms 50 Apeak 35 V / 70 V 75 mv 0.4 / 0.2 A/µs 30 / 65 V 250 / 200 mv < 7 mω < 35 mω 10 Arms 12 / 24 Apeak 200 V / 400 V 1 / 0.5 V 0.1 / 0.05 A/µs 185 / 370 V 2 / 1.5 V < 0.18 Ω < 2 Ω 0.4 Arms 2 / 4 Apeak Rev. Sept SPECIFICATIONS Page 1 3

4 DELTA ELEKTRONIKA BV SM800 In su la tion in put / out put creepage / clear ance 3750 Vrms (1 min.) 8 mm in put / case out put / case 2500 Vrms 600 V DC Safety EN / EN EMC Power Sup ply Stan dard Ge neric Emis sion Ge neric Im mu nity EN , Emis sion: res i den tial, light in dus trial en vi ron ment (CISPR22Class B) Im mu nity: in dus trial en vi ron ment EN , res i den tial, light in dus trial en vi ron ment (EN B) EN , in dus trial en vi ron ment Operating Temperature at full load 20 to + 50 C de rate out put to 75% at 60 C Humidity max. 95% RH, non con dens ing, up to 40 C max. 75% RH, non con dens ing, up to 50 C Storage temperature 40 to + 85 C Thermal protection Out put shuts down in case of in suf fi cient cool ing MTBF hrs HoldUp time V out = 100%, P out <= 840 W V out = 85%, I out = 100% V out = 100%, I out = 230 V AC in put (time till DCfail = 1) 16 ms 20 ms 36 ms Turn on de lay af ter mains switch on V AC, V AC Inrush current 24 A@115 V AC, 22 A@230 V AC Se ries op er a tion max. to tal volt age Mas ter / Slave op er a tion Par al lel op er a tion max. to tal cur rent Mas ter / Slave op er a tion Re mote sens ing max. volt. drop per load lead Limits Voltage ad just range Cur rent ad just range Potentiometers & Encoders front panel con trol with knobs res o lu tion screw driver ad just ment dig i tal encoders Me ters scale volt age scale cur rent ac cu racy read out put read limit set ting (d = digit) 600 V yes no limit max. 4 units (in clud ing mas ter) 2 V 0 102% 0 102% stan dard 0.03 % Option P001 (at front panel) Option P236 SM SM 1850 SM 70AR24 SM 400AR V A V A V A V A Mounting Stack ing of units al lowed, air flow is from rear to the sides. Input Connector IEC320/C14, EN 60320/C14 Output Terminals M5 bolts Programming connector 15 pole Dcon nec tor at rear panel (FE MALE) Cooling au dio noise level air flow Low noise blower, fan speed adapts to tem per a ture of in ter nal heatsink. ca. 45 dba at full load, 25 C am bi ent tem per a ture, 1 m dis tance ca. 50 dba at full load, 50 C am bi ent tem per a ture, 1 m dis tance from rear to sides En clo sure de gree of pro tec tion IP20 Di men sions be hind front panel: h x w x d front panel: h x w Weight 86 x 221 x 406 mm (feet re moved) 88.1 x 222 mm (1/2 19", 2 U) 5.4 kg Page 1 4 SPECIFICATIONS Rev. Sept. 2012

5 SM800 DELTA ELEKTRONIKA BV Typical Applications Accurate current sources Automotive battery simulation Driving PWMcontrolled DCmotors Electronic circuit development Controlled battery (dis)charging Medical research equipment Component device testing Lasers Aerospace and military equipment ATE in industrial production lines Avail able Op tions In creased Output Power The conservatively rated unit allows to deliver extra output with the same reliability. At some derating, either the maximum output voltage or the maximum output current can be increased by about 10%. High speed programming 0,4ms A 10 to 20 times higher programming speed (down to 0.2 ms rise time at full load) and lower output capacitance.excellent for laser applications, test systems or as current source with low parallel capacitance as used in plasma chambers. TwoQuadrant Out put: Power sink Two quadrant operations maintains the output voltage constant regardless the output power is positive or negative. Ideal for PWMspeed controlled DCmotors and ATE systems. Order Code P069 Order Codes : SM P250 SM 70AR24 P252 SM 1850 P251 SM 400AR4 P253 Order Codes : SM P245 SM 70AR24 P247 SM 1850 P246 SM 400AR4 P248 Digital Voltage and current set ting Reliable, long life digital encoders are implemented at the front panel. Includes total front panel lock (also for /knobs) and a coarse or fine pitch adjustment depending on the turning speed. Order Code P236 Order Code P089 High Volt age Isolation A higher output isolation allows series operation up to 1000V Se cured Volt age and Cur rent Set ting For a maximum security,the / settings can be adjusted with a screwdriver only and are protected with a plastic cap from accidental adjusting. Order Code P001 Sequencer Arbitrary Waveform generator or standalone automation. The se quencer is in te grated in the Ethernet con trol ler. Front Power Out put Blind posts at the front panel instead of at the rear panel. 19" Rack Mounting Adapter The 19" mounting adapters makes it possible to position one or two units side by side in a 19" rack. Order Code P256 Order Codes : SM n.a. SM 70AR24 P258 SM 1850 P257 SM 400AR4 P259 Order Code RA19 2SM800 Software control and in ter faces Factory installed programming interfaces: ISO AMP Card isolated analog P249 RS232 controller P254 IEEE488 controller P255 Ethernet controller (incl. sequencer) P256 PROFIBUS controller P271 CANBUS controller P272 Note: 1. Down load spe cial datasheet about High Speed Pro gram., Power Sink and Bat tery Charg ing from 2. There is only room for one of the in ter faces in a unit (P249, P254, P255, P256, P271 or P272). Rev. Sept SPECIFICATIONS Page 1 5

6 DELTA ELEKTRONIKA BV SM800 = Con stant Volt age = Con stant Cur rent Specifications measured at t amb = 25 ± 5 C and Vin = 230 V AC, 50 Hz, un less oth er wise noted. The information in this document is sub ject to change with out no tice Con nec tions pro gram ming con nec tor An a log (stan dard) Interlock Ethernet user I/O or RS232 or CAN or PROFI (all op tional) Ethernet or IEEE488 or iso lated an a log (all op tional) Pro gram ming Con nec tors Safety Cover sup plied for out put (not shown) Sense Block Sta tus Re lay Mas ter / Slave Out put Ter mi nals Line Cord sup plied In put Con nec tor Front panel con nec tion SM1850 Opt. 257 SM70AR24 Opt. 258 SM400AR4 Opt " Rack Adapter RA192SM800 Page 1 6 SPECIFICATIONS Rev. Sept. 2012