VRB_D-40W SERIES 40W, WIDE INPUT, ISOLATED & REGULATED SINGLE OUTPUT DC-DC CONVERTER

Transcription

1 VRB_D-40W SERIES 40W, WIDE INPUT, ISOLATED & REGULATED SINGLE OUTPUT - CONVERTER PART NUMBER SYSTEM VRB45D-40W SELECTION GUIDE Model Number Patent Protection RoHS Rated Power Package Style Output Voltage Input Voltage Product Series Input Voltage(V) Nominal (Range) Max* Output Output Current (ma) Voltage (V) Max. Min. FEATURES Efficiency up to % High power density : wide input range.5kv Isolation Over Current Protection Over Temperature Protection Short Circuit Protection Over Output Voltage Protection Under Input Voltage Protection Remote Voltage Compensate Operating Temperature Range: -40 C to + C Metal Shielding Package 0.4 Industrial level specifications APPLICATIONS The VRB_D-40W series are particularly suited to data transfer equipments, battery operated equipments, tele-communication equipments, distributing power system, mix analog/digital system, remote control system, industrial robot system and other wide input voltage application fields. Input Load Load Reflected Ripple Current (ma,typ.) Max. Capacitive Load(µF) Efficiency (%, Load VRB03D-40W VRB05D-40W VRBD-40W (9-8) VRB5D-40W VRB4D-40W VRB403D-40W VRB405D-40W VRB4D-40W 4 (8-36) VRB45D-40W VRB44D-40W VRB43D-40W VRB45D-40W VRB48D-40W 48 (36-) VRB4D-40W VRB484D-40W *Input voltage can t exceed this value, or will cause the permanent damage..add suffix H for heatsink mounted, for example VRB45D-40WH. INPUT SPECIFICATIONS 4 89 Input Surge Voltage(sec. max.) Under Voltage Shutdown V input V input V input V input V input V input V The copyright and authority for the interpretation of the products are reserved by MORNSUN VRB_D-40W A/4-0 Page of 6

2 Ctrl * Start-up Time Nominal input& constant resistance load ms Models ON V or open circuit Models OFF 0-.V Input current(models OFF) ma Short Circuit Input Power W Input Filter π Filter *The CTRL control pin voltage is refer to. OUTPUT SPECIFICATIONS Output Power W Output Voltage Accuracy Refer to recommended circuit -- ± -- Line Regulation Full load, input voltage from low to high -- ±0. -- Load Regulation 0% to % load -- ± Transient Recovery Time 5%~ 50%~5% load or µs Transient Response Deviation 50%~%~50% load step change -- ±3 ±5 % Temperature Drift % load -- ± %/ C Ripple* MHz bandwidth Noise* Over Current Protection Over Voltage Protection Over Temp. Protection Full input voltage 0-50%Po 0-30%Vo % mvp-p Trim Nominal light load -- ±0%Vo -- Sense Remote voltage compensation -- 0%Vo -- Short Circuit Protection Full input voltage Hiccup, Continuous, automatic recovery *Ripple and noise tested by parallel cable method. See detailed operation instructions at Testing of Power Converter section, application notes. COMMON SPECIFICATIONS Isolation Voltage Tested for minute and leakage current less than ma V Isolation Resistance Test at MΩ Isolation Capacitance Input/Output,KHz/0.V pf Switching Frequency Full load, nominal input KHz MTBF MIL-HDBK-7F@ K hours Case Material Weight ENVIRONMENTAL SPECIFICATIONS Nickel- coated copper(six-sided) Without heatsink With heatsink Storage Humidity Non condensing 5 -- % Operating Temperature See temperature derating curve Storage Temperature The Max. Case Temperature Operating temperature curve range Lead Temperature.5mm from case for 0 seconds Cooling EMC SPECIFICATIONS Free air convection EMI CE CISPR/EN550 CLASS A(External Circuit Refer to Figure-) EMS ESD IEC/EN-4- Contact ±4KV perf. Criteria B EFT IEC/EN-4-4 ±KV perf. Criteria B(External Circuit Refer to Figure -) Surge IEC/EN-4-5 ±KV perf. Criteria B(External Circuit Refer to Figure -) V g C The copyright and authority for the interpretation of the products are reserved by MORNSUN VRB_D-40W A/4-0 Page of 6

3 EMC RECOMMENDED CIRCUIT FUSE LDM LCM C3 MOV TVS C0 C C C4 EUT LOAD (Figure) Recommended external circuit parameters: EMS EMI Model VRB_D-40W VRB4_D-40W VRB48_D-40W FUSE Choose according to practical input current MOV -- 0D5K 0D0K LDM -- 56μH 56μH TVS SMCJ8A SMCJ48A SMCJA C0 6μF/5V 0μF/5 0μF/V C0 6μF/5V -- 0μF/V C µF/5 -- LCM mH C µF/5 -- C3 -- 0pF/KV -- C4 pf/kv 0pF/KV --. In Figure,partis EMS Recommended external circuit, partis EMI recommended external circuit. Choose according to requirements.. If there is no recommended parameters, the model no require the external component. EMC RECOMMENDED CIRCUIT PCB LAYOUT PRODUCT TYPICAL CURVE Output Power Perent (%) (Figure ) (Output Voltage 5V) (Output Voltage > 5V) With heatsink Without heatsink Safe Operating Area Operating Temp( C) Output Power Perent (%) With heatsink Without heatsink 40 Safe Operating Area Operating Temp( C) The copyright and authority for the interpretation of the products are reserved by MORNSUN VRB_D-40W A/4-0 Page 3 of 6

4 Efficiency(%) Efficiency VS Input Voltage curve (Full Load) Input Voltage(V) VRB405D-40W Efficiency(%) Efficiency VS Input Voltage curve (Full Load) Input Voltage(V) VRB45D-40W Efficiency(%) Efficiency VS Output Load curve (=-nominal) VRB405D-40W Output Current Percent(%) Efficiency(%) OUTLINE DIMENSIONS, RECOMMENDED FOOTPRINT & PACKAGING MECHANICAL DIMENSIONS Efficiency VS Output Load curve (=-nominal) RECOMMENDED FOOTPRINT Output Current Percent(%) VRB45D-40W.0 [0.44].50[0.059] (Front View). [0.4] [0.039] 3.50[0.38] Metal Case Insulative Plastic 4.0[0.6] ±0.35[.000±0.04] 45.7[.0] [0.00] [0.400] 3 (Bottom View) [0.300]. [0.500]. [0.500] ±0.35 [.000±0.04] 50. grid.54*.54mm. TUBE OUTLINE DIMENSIONS (WITHOUT HEATSINK) [.38] Metal Case FOOTPRINT DETAILS Pin Function Ctrl -Sense +Sense Trim 5.08 [0.00] Unit:mm[inch] Pin diameter tolerances:± 0.0mm[± 0.004inch] General tolerances:± 0.5mm[± 0.00inch] 3.0 [0.50] Unit :mm[inch] General tolerances: ± 0.50mm[± 0.00inch] 5.00 [0.59] 0.00 [0.787] L=0mm[8.66inch] Pcs/Tube:3 Inner package dimensions: L*W*H= 55**mm Outer package dimensions(with six inner packaging boxes): L*W*H= 3**mm The copyright and authority for the interpretation of the products are reserved by MORNSUN VRB_D-40W A/4-0 Page 4 of 6

5 HEATSINK ASSEMBLY & PACKAGE DIAGRAM Thermal Pal Heatsink Models 7.50 [0.689] 50.[.000] Clamp 50.[.000] Ø.50 [0.059] Max55.40[.8] Max3.00[0.6] Unit: mm[inch] tolerances:± 0.50mm[± 0.00inch]. If use heatsinks, make sure there is enough space for a specific size in the above graph;. Products will be supplied with heatsinks already mounted, separate heatsinks are not available. Inner packaging dimensions: L*W*H=355*9*93mm Packaging quantity: 0pcs Outer packaging dimensions: L*W*H=405*3*305mm Packaging quantity: 0pcs TEST CONFIGURATIONS Input Reflected-Ripple Current Test Setup Input reflected-ripple current is measured with an inductor Lin and Capacitor Cin to simulate source impedance. Oscilloscope Lin Cin Current Probe Load Lin(4.7µH) Cin(0µF, ESR <.0Ω at KHz) SENSE USE ( REMOTE VOLTAGE COMPENSATION) +S Shield Converter Load -S TRIM APPLICATION & TRIM RESISTANCE Sense Connection Application circuit for TRIM (Part in broken line is the interior of models) Formula for resistance of Trim ar up: R= T -R3 a= R-a Vo - R R R3 Trim R R3 RT Trim ar Vo - down: R T= -R3 a= R-a R R RT R Trim up Trim down Leave open if not used. Value for R, R, R3, and refer to the above table. R T: Resistance of Trim. a: User-defined parameter, no actual meanings. Vo : The trim up/down voltage. Vo 3.3(V) 5(V) (V) 5(V) 4(V) Parameter R(KΩ) R(KΩ) R3(KΩ) (V) The copyright and authority for the interpretation of the products are reserved by MORNSUN VRB_D-40W A/4-0 Page 5 of 6

6 DESIGN CONSIDERATIONS ) Requirement on output load To ensure this module can operate efficiently and reliably, During operation, the minimum output load could not be less than 0% of the full load. If the actual output power is very small, please connect a resistor with proper resistance at the output end in parallel to increase the load. ) Recommended circuit All the VRB_D-40W series have been tested according to the following recommended testing circuit before leaving factory. This series should be tested under load. Never be tested under no load (see Figure 3). If you want to further decrease the output ripple, you can increase capacitance properly or choose capacitors with low ESR. However, the capacitance can t exceed the maximum capacitor load in the list (Table ). 3) Cannot use in parallel and hot swap Cin (Figure 3) ut EXTERNAL CAPACITOR TABLE (TABLE ) Capacitance Output Cout(µF) Cin(µF) Voltage 3.3V, 5V 0 V, 5V 4V 47. Operation under minimum load will not damage the converter; However, they may not meet all specification listed.. Max. Capacitive Load tested at input voltage range and full load. 3. All specifications measured at Ta=5 C, humidity<%, nominal input voltage and rated output load unless otherwise specified. 4. In this datasheet, all the test methods of indications are based on our corporate standards. 5. All characteristics are for listed model only, non-standard models may perform differently, please contact our technical person for more detail. 6. Contact us for your specific requirement. 7. Specifications subject to change without prior notice. MORNSUN Science & Technology Co.,Ltd. Address: No. 5, Kehui St., Kehui development center, Science Ave., Guangzhou Science City, Luogang district, Guangzhou,P.R.China. Tel: Fax: The copyright and authority for the interpretation of the products are reserved by MORNSUN VRB_D-40W A/4-0 Page 6 of 6