1.7. Pushbuttons and Indicating Lights. Standards and Certifications UL Listed File No. E CSA Certified File No. LR68551

Transcription

1 .7 Pushbuttons and Indicating Lights Contents escription 30.5 mm Square Multifunction Watertight/Oiltight E30 Product Identification Product Selection Operators Operator Components Accessories Options Replacement Parts Technical ata and Specifications imensions Product escription The E30 industrial pushbutton and indicating light line from Eaton s Electrical Sector features a wide selection of square, multifunction operators which conveniently mount in a standard 30.5 mm (-3/64 in) diameter panel hole. Up to six input and indicating functions can be grouped into a single operating head, saving valuable panel space. Attractive square operator styling, coupled with custom legending of colored buttons and lenses and many special function accessories, makes E30 components ideally suited for use on control consoles and for a variety of industrial OEM applications. Features Type E30 control units consist of a basic operator with one or more buttons and lenses and contact block selection dependent on the specific operator configuration. Pushbutton operators will accommodate up to four single depth stackable contact blocks behind each operating button, up to eight circuits maximum. Indicating lights are supplied complete with either a transformer light unit up to 600 Vac supply line voltage or full voltage light unit up to 20 Vac/Vdc supply line voltage. Combination pushbutton with indicating light operators are supplied complete with a transformer or full voltage unit. Contact blocks must be ordered separately, up to four circuits maximum. ie Cast Construction Each operator has high pressure type seals to prevent the passage of oil and other contaminants through the operator into the contact structure or panel interior. Each operator uses a una N cork gasket between the mounting flange on the operator and the panel to maintain oiltightness. Standards and Certifications Page V7-T-65 V7-T-66 V7-T-6 V7-T-75 V7-T-76 V7-T-7 V7-T-0 V7-T- UL Listed File No. E356 CSA Certified File No. LR655 Ingress Protection Single and dual indicating lights UL (NEMA) Type, 2, 3, 3R, 3S, 4, 4X, 2, 3 All other operators UL (NEMA) Type 3, 3R, 4, 4X, 2, 3 V7-T-64 Volume 7 Logic Control, Operator Interface and Connectivity Solutions CA00000E March 204

2 Pushbuttons and Indicating Lights.7 Product Identification 30.5 mm Square Multifunction Watertight/Oiltight Multifunction Operator (see Pages V7-T-66 to V7-T-6) uttons and es Supplied lank or with Custom Legend(s) (see Pages V7-T-6 to V7-T-73) Lower Contact lock Operating Plunger Upper Contact lock Operating Plunger Gasket Retaining Nut Secures Operator to Panel Locking Ring Supplied with Operator Serves as Mount for Light Element and Contact locks Quarter Turn Screw Mounts Locking Ring to Operator Transformer or Full Voltage Light Element Supplied with Operator Single Circuit Contact lock Two Circuit Contact lock Volume 7 Logic Control, Operator Interface and Connectivity Solutions CA00000E March V7-T-65

3 .7 Pushbuttons and Indicating Lights Product Selection Operators When Ordering a Complete E30 Control Unit Specify of Ordering Example (E30A) Operator E30K30 START utton(s) E30K23 STOP Contact block(s) E30KLA NO Accessories (if required) E30KLA2 NC Square Multifunction Operators UL (NEMA) Type 3, 3R, 4, 4X, 2, 3 Single utton Operator Shown with Extended utton Two utton Operator Shown with Extended uttons Two utton Operator Shown with Long Release ar Single utton Operator/without utton (Order utton Separately) utton Type Required Operation Special Features Momentary E30AA Two utton Operator/without uttons (Order uttons Separately) utton Types Operation Required Top utton ottom utton Special Features Momentary Momentary E30A Momentary Momentary With mechanical E30AC interlock Maintained (all contacts) Maintained (all contacts) Release (all contacts) Release (all contacts) E30A 2 With mechanical interlock E30AP 23 Two utton Operator with Long (OFF) Release ar Includes OFF ar/utton (Order Other uttons Separately) utton Types Required 45 Operation Top utton ottom utton Special Features Maintained Maintained E30AF Maintained Maintained With mechanical interlock Maintained Momentary With mechanical interlock Maintained (all contacts) Maintained (bottom contacts only) Top button operates both top and bottom contacts E30AG E30AH E30AK 6 Notes Order from table on Page V7-T-6. 2 Limited to two single circuit, one double circuit 600V or two 20V (E30KLA) contact blocks behind each button. 3 uttons are interlocked so that one of the two is maintained at all times. epressing the other button releases the maintained button and maintains the depressed button. 4 Operators are supplied as standard with red extended bar(s) marked OFF as shown in sketch. For other colors or markings, contact your nearest Eaton istributor or call our Customer Service Center For replacement of standard red release bar, order E30KR00. 5 Order from table on Page V7-T Limited to two single circuit, one double circuit 600V or two 20V (E30KLA) contact blocks behind each button. V7-T-66 Volume 7 Logic Control, Operator Interface and Connectivity Solutions CA00000E March 204

4 Pushbuttons and Indicating Lights.7 Square Multifunction Operators and Indicating Lights UL (NEMA) Type 3, 3R, 4, 4X, 2, 3 Two utton Operator Shown with Release ar for Top utton Two utton Operator Shown with Release ars for Each utton Single Indicating Light Unit Shown with ual Indicating Light Unit Shown with Two utton Operator with (OFF) Release Includes OFF ar/utton(s) (Order Other uttons Separately) utton Types Required 2 Single Indicating Light Unit/without (Order Separately) Type of Light Element Type Required 3 ual Indicating Light Unit/without es (Order es Separately) Type of Light Element Types Required 5 Notes Order from table on Page V7-T Operators are supplied as standard with red extended release bar(s) marked OFF as shown in sketch. For other colors or markings, contact your nearest Eaton istributor or call our Customer Service Center For replacement of standard red release bar, order E30KR0. 3 Order from table on Page V7-T-7. 4 Light units will also accept LE lamps. For LE part numbers, see table on Page V7-T-7. 5 Order from table on Page V7-T-72. Operation Top utton ottom utton Special Features Maintained Momentary Release bar for top button Maintained Maintained Individual release bars for each button Maintained with interlock Transformer (60/50 Hertz AC) Maintained with interlock Individual release bars for each button Full Voltage (60/50 Hertz AC or C) E30AL E30AN E30AM Voltage Number 4 Voltage Number PS E30A 24 24PS E30J 20 20PS E30M Transformer (60/50 Hertz AC) Full Voltage (60/50 Hertz AC or C) Voltage Number 4 Voltage Number PS E30CA 24 24PS E30CJ 20 20PS E30CM Volume 7 Logic Control, Operator Interface and Connectivity Solutions CA00000E March V7-T-67

5 .7 Pushbuttons and Indicating Lights UL (NEMA) Type 3, 3R, 4, 4X, 2, 3 Single utton Operator and Indicating Light Shown with utton and Single utton Operator with Release ar and Indicating Light Shown with utton and Two utton Operator with Indicating Light Shown with utton and Two utton Operator with ual Indicating Lights Shown with utton and Single utton Operator with Indicating Light/without utton or (Order utton and Separately) utton and Types Required Single utton Operator with (OFF) Release ar and Indicating Light Includes OFF ar/utton (Order Other utton and Separately) utton and Types Required Two utton Operator with Indicating Light/without uttons or (Order uttons and Separately) utton and Types Required 4 Two utton Operator with ual Indicating Lights/without uttons and utton and Types Required Notes Operation (ottom utton) Type of Light Element Transformer (60/50 Hertz AC) Full Voltage (60/50 Hertz AC or C) Voltage Number 2 Voltage Number 2 Momentary 20 6PS E30A 24 24PS E30X PS E30F Operation (ottom utton) Type of Light Element Transformer (60/50 Hertz AC) Full Voltage (60/50 Hertz AC or C) Voltage Number 3 Voltage Number 2 Maintained 20 6PS E30G 24 24PS E30X PS E30M Type of Light Element Transformer (60/50 Hertz AC) Full Voltage (60/50 Hertz AC or C) utton Operation Voltage Number 2 Voltage Number 2 Momentary 20 6PS E30EA 24 24PS E30EX PS E30EF Momentary 20 6PS E30EG 24 24PS E30EX3 with interlock 20 20PS E30EM Type of Light Element Transformer (60/50 Hertz AC) Full Voltage (60/50 Hertz AC or C) utton Operation Voltage Number 2 Voltage Number 2 Momentary 20 6PS E30JA 24 24PS E30JX PS E30JF Order from tables on Pages V7-T-6 to V7-T Light units will also accept LE lamps. For LE part numbers, see table on Page V7-T-7. 3 Operators are supplied as standard with red extended release bar(s) marked OFF as shown in sketch. For other colors or markings, contact your nearest Eaton istributor or call our Customer Service Center For replacement of standard red release bar, order E30KR0. 4 Order from tables on Pages V7-T-7 and V7-T-72. V7-T-6 Volume 7 Logic Control, Operator Interface and Connectivity Solutions CA00000E March 204

6 Pushbuttons and Indicating Lights.7 Operator Components Operating uttons Only Type A Extended utton Type Extended utton Type A uttons with Standard Markings utton Application Color Marking Extended utton Type uttons with Standard Markings 2 utton Application Color Marking Short utton Color Marking Notes Use with operator E30AA, legend characters 3/6 in (4. mm) high. 2 Use with operators E30A thru AE, AL and A thru F, legend characters 3/6 in (4. mm) high. Extended utton Short utton lack lank E30KA00 E30KA50 Green START E30KA330 E30KA30 START E30KA0 Yellow lank E30KA400 E30KA450 Red lank E30KA200 E30KA250 White lank E30KA500 E30KA550 EMERG. STOP E30KA204 Gray lank E30KA600 E30KA650 OFF E30KA2 E30KA26 rown lank E30KA700 E30KA750 STOP E30KA23 E30KA2 Orange lank E30KA00 E30KA50 Green lank E30KA300 E30KA350 lue lank E30KA00 E30KA50 Extended utton Short utton Color Marking Extended utton Short utton lack lank E30K00 E30K50 lack REVERSE E30K25 E30K75 AUTO E30K0 E30K5 RUN E30K26 E30K76 CLOSE E30K02 E30K52 SLOW E30K2 E30K7 OWN E30K03 E30K53 START E30K30 E30K0 FAST E30K05 E30K55 TEST E30K32 E30K2 FORWAR E30K07 E30K57 UP E30K34 E30K4 HIGH E30K0 E30K5 Red lank E30K200 E30K250 IN E30K0 E30K60 EMERG. STOP E30K204 INCH E30K E30K6 OFF E30K2 E30K26 JOG E30K2 E30K62 STOP E30K23 E30K2 JOG FOR. E30K3 E30K63 Green lank E30K300 E30K350 JOG REV. E30K4 E30K64 START E30K330 E30K30 LOW E30K5 E30K65 Yellow lank E30K400 E30K450 LOWER E30K6 E30K66 White lank E30K500 E30K550 MAN E30K7 E30K67 AUTO E30K50 ON E30K E30K6 HAN E30K50 OPEN E30K20 E30K70 Gray lank E30K600 E30K650 OUT E30K2 E30K7 rown lank E30K700 E30K750 RAISE E30K22 E30K72 Orange lank E30K00 E30K50 RESET E30K24 E30K74 lue lank E30K00 E30K50 Volume 7 Logic Control, Operator Interface and Connectivity Solutions CA00000E March V7-T-6

7 .7 Pushbuttons and Indicating Lights Type C Extended utton Type C uttons with Standard Markings utton Application Color Marking Extended utton Short utton Color Marking Note Use with operators E30AF thru AK, AL thru AM and G thru M, legend characters / in (3.2 mm) high. Extended utton Short utton lack lank E30KC00 E30KC50 lack RESET E30KC24 E30KC74 AUTO E30KC0 E30KC5 REVERSE E30KC25 E30KC75 CLOSE E30KC02 E30KC52 RUN E30KC26 E30KC76 OWN E30KC03 E30KC53 SLOW E30KC2 E30KC7 FAST E30KC05 E30KC55 START E30KC30 E30KC0 FORWAR E30KC07 E30KC57 TEST E30KC32 E30KC2 HAN E30KC0 E30KC5 UP E30KC34 E30KC4 HIGH E30KC0 E30KC5 Red lank E30KC200 E30KC250 IN E30KC0 E30KC60 OFF E30KC2 INCH E30KC E30KC6 STOP E30KC23 E30KC2 JOG E30KC2 E30KC62 Green lank E30KC300 E30KC350 JOG FOR. E30KC3 E30KC63 START E30KC330 E30KC30 JOG REV. E30KC4 E30KC64 Yellow lank E30KC400 E30KC450 LOW E30KC5 E30KC65 White lank E30KC500 E30KC550 LOWER E30KC6 E30KC66 Gray lank E30KC600 E30KC650 MAN E30KC7 E30KC67 rown lank E30KC700 E30KC750 ON E30KC E30KC6 Orange lank E30KC00 E30KC50 OPEN E30KC20 E30KC70 lue lank E30KC00 E30KC50 OUT E30KC2 E30KC7 RAISE E30KC22 E30KC72 V7-T-70 Volume 7 Logic Control, Operator Interface and Connectivity Solutions CA00000E March 204

8 Pushbuttons and Indicating Lights.7 Operating uttons and Only Standard Color uttons and Marking lack lettering on White, Amber, Yellow and Clear. White lettering on Green, Red, lue, rown, lack, Orange and Gray. Type E utton Type F Type E uttons with Standard Markings 2 utton Application Color Marking Type F es with Standard Markings 3 Extended utton Color Marking Notes For lenses with special markings or with standard markings but in a different color, refer to instructions on Pages V7-T-76 to V7-T-7. 2 Use with operators E30EA thru EM, FA thru FM and JA thru JM, legend characters / in (3.2 mm) high. 3 Use with operators E30A thru Y, legend characters 3/6 in (4. mm) high. Extended utton lack lank E30KE00 lack RESET E30KE24 CLOSE E30KE02 REVERSE E30KE25 OWN E30KE03 RUN E30KE26 FAST E30KE05 SLOW E30KE2 FORWAR E30KE07 START E30KE30 HIGH E30KE0 TEST E30KE32 IN E30KE0 UP E30KE34 INCH E30KE Red lank E30KE200 JOG E30KE2 OFF E30KE2 JOG FOR. E30KE3 STOP E30KE23 JOG REV. E30KE4 Green lank E30KE300 LOW E30KE5 START E30KE330 LOWER E30KE6 Yellow lank E30KE400 ON E30KE White lank E30KE500 OPEN E30KE20 Gray lank E30KE600 OUT E30KE2 rown lank E30KE700 PHASE E30KE22 Orange lank E30KE00 lue lank E30KE00 utton Application Color Marking Color Marking Red lank E30KF0 Green OFF E30KF22 MOTOR RUN E30KF Amber lank E30KF30 ON E30KF2 lue lank E30KF40 POWER ON E30KF3 Clear lank E30KF50 Green lank E30KF20 White lank E30KF60 MOTOR STOP E30KF2 MOTOR RUN E30KF23 Volume 7 Logic Control, Operator Interface and Connectivity Solutions CA00000E March V7-T-7

9 .7 Pushbuttons and Indicating Lights Operating Only Standard Color uttons and Marking lack lettering on White, Amber, Yellow and Clear. White lettering on Green, Red, lue, rown, lack, Orange and Gray. Type G Type J Type K es Type G es with Standard Markings 2 Application Color Marking Color Marking Red lank E30KG0 Green OFF E30KG22 MOTOR RUN E30KG REAY E30KG23 ON E30KG2 Amber lank E30KG30 POWER ON E30KG3 lue lank E30KG40 Green lank E30KG20 Clear lank E30KG50 MOTOR RUN E30KG24 White lank E30KG60 MOTOR STOP E30KG2 Type J es with Standard Markings 3 Application Color Marking Color Marking Red lank E30KJ0 Green OFF E30KJ22 MOTOR RUN E30KJ ON E30KJ24 ON E30KJ2 Amber lank E30KJ30 POWER ON E30KJ3 lue lank E30KJ40 MOTOR STOP E30KJ4 Clear lank E30KJ50 Green lank E30KJ20 White lank E30KJ60 MOTOR STOP E30KJ2 MOTOR RUN E30KJ23 Type K es with Standard Markings (Sold in Pairs Only) 4 Application Notes Color Marking Left Hand Right Hand Left Hand Right Hand Red Red ON ON E30KK2 Green ON OFF E30KK3 Green OFF OFF E30KK22 Red OFF ON E30KK23 For lenses with special markings or with standard markings but in a different color, refer to instructions on Pages V7-T-76 to V7-T-7. 2 Use with operators E30CA thru CM and A thru M, legend characters 3/6 in (4. mm) high except MOTOR RUN, POWER ON and MOTOR STOP are / in (3.2 mm) high. 3 Use with operators E30EA thru EM, FA thru FM and GA thru GM, legend characters / in (3.2 mm) high. 4 Use with operators E30JA thru JW, legend characters / in (3.2 mm) high V7-T-72 Volume 7 Logic Control, Operator Interface and Connectivity Solutions CA00000E March 204

10 Pushbuttons and Indicating Lights.7 Type K es Type K es lank (Sold in Pairs Only) Color Color Left Hand Right Hand Left Hand Right Hand Red Red E30KK0 lue Red E30KK4 Green E30KK Green E30KK42 Amber E30KK7 Amber E30KK43 lue E30KK4 lue E30KK40 Clear E30KK5 Clear E30KK45 White E30KK6 White E30KK46 Green Red E30KK2 Clear Red E30KK5 Green E30KK20 Green E30KK52 Amber E30KK27 Amber E30KK53 lue E30KK24 lue E30KK54 Clear E30KK25 Clear E30KK50 White E30KK26 White E30KK56 Amber Red E30KK3 White Red E30KK6 Green E30KK32 Green E30KK62 Amber E30KK30 Amber E30KK63 lue E30KK34 lue E30KK64 Clear E30KK35 Clear E30KK65 White E30KK36 White E30KK60 Volume 7 Logic Control, Operator Interface and Connectivity Solutions CA00000E March V7-T-73

11 .7 Pushbuttons and Indicating Lights Contact locks Standard Contact locks Molded, phenolic construction. Enclosed silver contacts with reliability nibs that improve the reliability of switching performance under dry circuit, corrosive atmosphere and fine dust conditions. For more extreme conditions, the logic level contact blocks described below are recommended. Logic Level Contact locks Feature palladium contacts. Palladium, which is more inert than gold, is well suited for voltages and currents approaching zero. When mounted in an enclosure rated for highly corrosive environments, logic level contact blocks can be used where exposure to chemicals may cause failure to other types of materials. Mounting Limitations See the contact block mounting limitations for Type E30 pushbutton and combination pushbutton and light operators on this page. Mounting positions thru indicate single depth contact blocks. Each of these positions can represent either a single circuit 600 volt block or a two-circuit 20 volt block. The two-circuit 600 volt block requires two of the numbered positions shown. Contact lock Type 2 Single Circuit, Screw Terminals Two Circuit, Screw Terminals Two Circuit, Quick Connect Terminals 20 Vac Only Two Circuit Contact lock Selection Circuit Special Contact Operation NO-NC Overlapping Notes Mounting Positions Except operator E30A, AJ or AK which will accommodate contact blocks, 2, 5 and 6 only. (See Mounting Positions above.) 2 Individually boxed contact blocks master packed 0 per carton. 3 Supplied with non-stacking screws. Limited to 2 contact blocks mounted in positions and 5. 4 o not use with maintained operators. 5 Contacts must be same polarity. Lower Contact lock Stack Operating Plunger of Operator Upper Contact lock Stack Operating Plunger Lower Contact lock Stack Upper Contact lock Stack Contact lock Mounting Positions Contact locks Can e Mounted in Positions Listed elow Upper Stack Lower Stack E30AA thru E30AM E30A thru E30CM None None E30A thru E30M None E30EA thru E30GM E30JA thru E30JM Pressure Terminals Quick Connect Terminals 3 Standard Logic Level Standard NO 600 Vac, 250 Vdc Single Circuit E30KLA E30KLAE E30KL NC E30KLA2 E30KLAE2 E30KL2 NO-NC 600 Vac, 250 Vdc Two Circuit E30KLA3 E30KLAE3 E30KL3 2NO E30KLA4 E30KLAE4 E30KL4 2NC E30KLA5 E30KLAE5 E30KL5 2NO (One early closing) 2NC (One late opening) NO-NC E30KLA6 4 E30KL6 4 E30KLA7 4 E30KL7 4 E30KLA E30KL 20 Vac Only Two Circuit E30KLA 5 E30KL 5 V7-T-74 Volume 7 Logic Control, Operator Interface and Connectivity Solutions CA00000E March 204

12 Pushbuttons and Indicating Lights.7 Accessories E30KR_ E30KT_ Half Shroud E30KR3_ E30KR30 E30KT_ E30KT3 E30KT_ E30KV E22CW E30KV2 Full Shroud Accessories escription Color/Type Collar Snap on mounting for assembly in the field. Permits lack E30KR color coding of operator heads. Size: -/32 x -/32 x /6 in. Red E30KR2 Green E30KR3 Yellow E30KR4 White E30KR5 Gray E30KR6 Orange E30KR lue E30KR rown E30KR0 Shroud Similar to collar above except for extension above the face of button to prevent accidental actuation of button. Half shroud with an extension on only half the collar may be positioned to protect top or bottom button. Guard Two collars deep, removable slide prevents accidental operation. White slide can be marked with grease pencil. Terminal lock 2 terminals, each will accommodate 2-wire terminations. Padlock Attachment for locking single button and bottom button of multi-function operators in the depressed position. Locks NC contacts open or early closing NO contacts closed. Cannot be used in conjunction with collar, shroud or boot. Transparent oot Guards against ingress of foreign material and freezing rain. Note: If this boot is used in conjunction with operator types A or AE, an extended type button must be used in the top position and a short button in the lower position. Square Hole Plug Gray enameled Stainless steel and Removal Tool Will not fit Cat. No. E30 light units listed on Page V7-T-67. Octagonal Wrench for mounting operators to panel. utton and Removal Tool Full shroud (gray) Half shroud (gray) Red with white slide Red with clear slide Short button Extended button E30KT6 E30KT7 E30KR3 E30KR32 E30KR30 E30KT E30KT2 E30KT3 E30KT4 E30KT5 E30KV E22CW E30KV2 Note Color coordinating collars, padlock attachments or legend plates cannot be used with operators equipped with a transparent boot. Volume 7 Logic Control, Operator Interface and Connectivity Solutions CA00000E March V7-T-75

13 .7 Pushbuttons and Indicating Lights Options Markings and Legend Plates uttons or es with Non- Standard Horizontal Markings Markings not listed as Standard Markings below are considered non-standard. If more than one marking is required on a button or lens, order non-standard markings. Legend Locations Type A buttons and Type F lenses / in (3 mm) 3/6 in (5 mm) Standard Markings AUTO CLOSE OWN C 6 C 6 G Type buttons and Type G lenses / in (3 mm) Type C buttons / in (3 mm) Type buttons / in (3 mm) F EMERG. STOP FAST FORWAR 5 5 HAN HIGH IN 5 5 Ordering Instructions Specify catalog number of blank button or lens of desired color, plus suffix STAMP for non-standard or ST for standard markings in order notes. See Pages V7-T-6 to V7-T-73. Specify size, legend desired and location in order notes by alphas as shown in example. o not exceed maximum number of legend characters per line. A C E J H INCH JOG JOG FOR. JOG REV. LOW LOWER 6 G K F K MAN. OFF ON Ordering Example Green Type button to be marked with non-standard legend ALL ELEVATORS OWN. Catalog No.: E30K300STAMP Letter Size: / in Pos. A ALL Pos. C ELEVATORS Pos. F OWN 4 A 3/6 in 5 6 C (5 mm) 6 C 4 E 5 3/6 in (5 mm) OPEN OUT RAISE E J M E J K RESET REVERSE RUN 4 E 4 A 4 C 4 SLOW START STOP 4 F 4 How to Use the Legend Location Figure No. of Characters per Line uttons es TEST UP MOTOR RUN Line Position 7 7 A C E 3/6 in 7 A (5 mm) C C 7 F Type K buttons / in (3 mm) Type E buttons and Type J lenses / in 3/6 in (3 mm) 7 A (5 mm) 7 C A G K N 3/6 in (5 mm) Type F lens only 4 A C F J L MOTOR STOP POWER ON REAY E 4 V7-T-76 Volume 7 Logic Control, Operator Interface and Connectivity Solutions CA00000E March 204

14 Pushbuttons and Indicating Lights.7 Legend Arrangements and Legend Locations Legend plates E30KM or KM Legend plates E30KM3 or KM3 Legend plates E30KM4 or KM4 Legend Plates E30KN76 or KN76 L I N E A A C C LINE E F F L I N E C A Legend plates E30KN76 or KN76 / in character size only with a maximum of six characters. Legend plates E30KM5 or KM5 Legend plates E30KM2 or KM2 Legend plates E30KM6 or KM6 Maximum Number and Size of Permissible Legend Characters of Custom Stamped Legend Plates H F F Size and Maximum Number of Characters Per Line One Span Two Span Three Span K M M A C G H G J K L M F M Type No.of Lines 3/32 in (2.5 mm) / in (3 mm) 3/6 in (5 mm) 3/32 in (2.5 mm) / in (3 mm) 3/6 in (5 mm) 3/32 in (2.5 mm) / in (3 mm) 3/6 in (5 mm) Standard Large Characters available for non-standard markings 3/32 in (2.5 mm) / in (3 mm) 3/6 in (5 mm) A C E F G H I J K L M N O P Q R S T U V W X Y Z. /, A E F L M Volume 7 Logic Control, Operator Interface and Connectivity Solutions CA00000E March V7-T-77

15 .7 Pushbuttons and Indicating Lights uttons or es with Non-Standard Vertical Markings Ordering Instructions Specify catalog number of blank button or lens of desired color, selected from listings on Pages V7-T-6 to V7-T-73. Specify size, legend desired, location and state vertically marked in order notes. Note: Specify either / or 3/6 in (3.2 or 4. mm) character height. o not exceed maximum number of characters as outlined in table below. Ordering Example: Green Type K button to be marked with RUN ON. Catalog No.: E30KK20STAMP Letter Size: 3/6 in (4. mm) Vertically Marked Pos. RUN Pos. E ON Maximum Number of Characters Legend Plates Legend plates for Type E30 compact pushbutton and indicating light operators hook directly onto the operator and are clamped in place when the operator locking nut behind the panel is secured. Two and three span plates are designed for use where two or more operators are mounted adjacent to each other on minimum horizontal mounting centers. These legend plates mount in the same manner as single span units. Maximum Number of Characters escription Type / in (3.2 mm) 3/6 in (4. mm) uttons A C E 7 5 es F 7 5 G 7 5 J 7 5 K 3 2 When Ordering Legend Plates with Markings Catalog number of blank legend plate Insert the following in order notes: Legends required Size of characters 3/32, /, 3/6 in (2.4, 3.2, 4. mm) Positions of legends on one line standard and two line large legend plates by alphas as shown in sketches on following page. Standard One Span Large One Span Ordering Example: Three span legend plate to be marked MASTER CONTROL, STATION A and STATION. Catalog No.: E30KM3STAMP Letter Size: / in (3.2 mm) Pos. C MASTER CONTROL Pos. STATION A Pos. F STATION lank Legend Plates and Legend Plates with Markings Type lack Standard Large One Span E30KM E30KM4 V7-T-7 Volume 7 Logic Control, Operator Interface and Connectivity Solutions CA00000E March 204

16 Pushbuttons and Indicating Lights.7 Replacement Parts Replacement Light Units for E30 Components Voltage AC and C Full Voltage Type Replacement s for E30 Illuminated Operators Replacement s Incandescent and LE Note Part Numbers Receptacles without s Single Indicating Light ual Indicating Light E30 blue LE bulbs may not provide sufficient intensity for some applications. Single Light Single Pushbutton Single Light ual Pushbutton ual Light ual Pushbutton 6V A A A A V A A A A /24V A A A A V A A A A V A A A V A A A A V A A A A Transformer Type 20V A A A A A 20V A A A A A 240V A A A A A 30V A A A A A 40V A A A A A 600V A A A A A escription and Part Numbers Related Parts Inner lens Retaining nut Gasket Locking ring Mfg. Type Voltage ase Style Application Part Number 6PS 6V T2 slide E30 transformer and full voltage PS 2V T2 slide E30 full voltage PS 24V T2 slide E30 full voltage PS 2V T2 slide E30 full voltage PS 4V T2 slide E30 full voltage PS 60V T2 slide E30 full voltage PS 20V T2 slide E30 full voltage 2-02 #25 6.3V T3-/4 wedge E30 single transformer 2-4 Voltage Incandescent s Manufacturer s Part Number ase Style Eaton s Part Number LE s Eaton s Part Number Red Green Yellow lue 6 6PS T2 slide PS T2 slide PS T2 slide PS T2 slide PS T2 slide PS T2 slide Volume 7 Logic Control, Operator Interface and Connectivity Solutions CA00000E March V7-T-7

17 .7 Pushbuttons and Indicating Lights Technical ata and Specifications Operator Specifications escription Specification Climate Conditions Operating 20 to 50 F ( 2 to 65 C) Terminals Light units Terminals are saddle clamp type for 2 stranded or solid wires up to 2 AWG (4.0 mm 2 ) Torque 7 lb-in (0. Nm) Contact block Terminals are saddle clamp type for 2 stranded or solid wires up to 2 AWG (4.0 mm 2 ) Torque 7 lb-in (0. Nm) Materials Operator Zinc base die casting with a copper-nickel-chrome plated finish Withstands the 200 hr. salt spray test in accordance with MIL Spec. QQ-M-5A and NEMA 4X testing. Internal parts Including shafts, washers and springs, are made of stainless steel uttons and lenses Colorfast, wear resistant, molded acetal resin Contact blocks Made of molded, heat resistant, mineral filled phenolic Contact block plungers are molded of nylon filled phenolic Contacts are silver Reliability nibs These nibs combine a scrubbing action with high pressure density when the contacts are closed They push through particles and films found on contact surfaces in industrial environments Reliability nibs self-adjust to the application dry circuit, normal or heavy-duty Reliability Nibs Electrical Ratings Contact locks Meet or Exceed NEMA Contact Rating esignation A600 and P300 Vac A600 Vdc P300 escription 20V 240V 40V 600V 24/2V 25V 250V Make and emergency interrupting capacity (Amps) Normal load break (Amps) Continuous current (Amps) UL A600/P300 nominal connect 0A NO, NC, 2NO, 2NC, NO-NC, early make, late break and overlapping configurations Mechanical positive drive operation on NC contacts Palladium alloy contact for logic level or highly corrosive environments Maximum Ratings for Logic Level and Hostile Atmosphere Application escription Specification Maximum amperes 0.5A Maximum volts 20 Vac/Vdc Note ry Circuit Medium uty Logic level contact blocks are UL A600/P500 rated per table above. Heavy-uty Light Unit escription ulbs Average Life Transformer type Resistor/direct voltage type LE Specification 20,000 hrs. 2,500 hrs. min. at rated voltage 60,000 to 00,000 hrs. V7-T-0 Volume 7 Logic Control, Operator Interface and Connectivity Solutions CA00000E March 204

18 Pushbuttons and Indicating Lights.7 imensions Approximate imensions in Inches (mm) Pushbutton Operators. (47.).75 (44.5) Combination Pushbutton and Indicating Light Operators Padlocking Attachment and Half Shroud E30KT7 Legend Plates 0.53 (3.5).3 (2.7).47 (37.3) 0.63 (6) Square Std. utton 0.7 (.) Ext. utton. (47.).75 (44.5).47 (37.3) Square.44 (36.6) 0. (2.) Max. 0.7 (.) 0.3 (.) Large.3 (2.7) 0.75 (.) 0.53 (3.5) 0.4 (2.3).3 (2.7) 0.3 (7.) ia. Hole 0. (20.6).72 (43.7) Panel 0.06 (.5) Min (6.4) Max. 0. (20.6) 0. (22.4) 2 Circ. Cont. locks.72 (43.7) 4.6 (.) Three Span 3.06 (77.7) Two Span.44 (36.6) One Span Standard.72 (43.7) Plunger Extends to 0.25 (6.4) (22.4) (22.4) Circ. Cont. locks Full Voltage Types F, M and X Transformer Types A L 0. (22.4) 0. (22.4) Panel Plunger Extends 0.06 (.5) Min. to 0.25 (6.4) on 0.25 (6.4) Max. Contact locks 0.0 (.) 0.05 (.3) 0.5 (2.7) 0.6 (7.5).5 (40.4) 0.56 (4.2) 0.02 (0.5) Combination Pushbutton and Indicating Light Operators. (47.) Indicating Light Operators. (47.) rilling imensions Minimum Spacing a (57) Notes.75 (44.5).47 (37.3) Square.75 (44.5).47 (37.3) Square.63 a (4.3) rill.4 (3.5).3 (2.7).3 (2.7) 0.53 (3.5) 0.53 (3.5) ø.20 (30.5) 0.6 (5) 0.4 (2.3) 0.4 (2.3) 0. (20.6) 0. (20.6) 0. (22.4).72 (43.7) Panel 0.06 (.5) Min (6.4) Max. 0. (22.4).72 (43.7) Panel 0.06 (.5) Min (6.4) Max. Operator Types E30EA E30GM Operator Types E30JA E30JW Transformer or Full Voltage Light Element Plungers Extended to 0.25 (6.4) Operator Types E30A E30M Operator Types E30CA E30CM imensions shown allow adequate space for the addition of one or two high legend plates and color coordinating collars. 2 Locating nib hole or notch is 0.36 in (3.5 mm) drill. Alternate to drilling mounting holes use Greenlee Tool Co. punch (No. 730-S) to punch the hole and (No. 730-K) to punch the notch. Volume 7 Logic Control, Operator Interface and Connectivity Solutions CA00000E March V7-T-