ET M3792_a. DC 6, 12, 15, 20, 24 V AC 12, 24, 42, 230 V Voltage range U N
|
|
- Bridget Cole
- 5 years ago
- Views:
Transcription
1 Control Technique Connecting Module Interface Relay Pluggable HC According to DIN EN 18 output contacts with monostable PCB-relay OA 8 Version with bistable PCB-relay OB 9 Contact material with fine gold High thermal current up to I th = 1 A with relays OA 8 and OB 9 Large temperature range: C As option with free-wheel diode or varistor between A1/A As option with AgSnO or with hard gold Width: 1.8 mm ET OA ET11.0 ET11.01 OA 8 OA 7 OA8 OB 9 Circuit Diagrams A1(+) 11 1 A 1 1 M79_a A1 11 A 1 1 M79_a A1 11 A 1 1 M79_a 1 M79_a Approvals and Markings Technical Data Coil Nominal voltage U N DC, 1, 0,, 8, 0, 1 V, others on request DC, 1, 1, 0, V AC 1,,, 0 V Voltage range U N U N U N U N Nominal consumption 0. W 0. W 0. W 1 W / 1. VA.0 NO.1 C/O.01 1 NO.11 1 C/O.01 1 NO.11 1 C/O.01 1 NO.11 1 C/O Contact material as option AgSnO or with hard gold Rated insulation voltage AC 0 V Limiting continuous current I th A A 1 A 1 A Switching capacity min./max. Switching capacity AC 1 at AC 0 V DC 1 at DC V / 000 VA 0 / 00 W NC: 1 A, NO: A / 00 VA / 00 W NC: 1 A, NO: A / 000 VA / 00 W NC: 1 A, NO: A / 000 VA / 00 W NC: 1 A, NO: A Electrical life 1. x x x x Operate time / release time 8 / ms 7 / ms 7 / ms Other x Mechanical life 0 x 0 x 0 x DC 1 x AC Temperature range C C C C Insulation to DIN EN 0-1, DIN EN 0178 Overvoltage category AC 0 V Degree of pollution Rated impulse voltage III est voltage (1 min) Contact-coil Contact-contact Surge voltage ( ms) Contact-coil Clearance and creepage distance to DIN EN 070, DIN EN 0; Contact-coil kv AC eff.. kv AC eff. kv kv AC eff. 1. kv AC eff. 8 mm Weight 1 g 17 g 17 g 1 g All technical data in this list relate to the state at the moment of edition. We reserve the right for technical improvements and changes at any time en / 7
2 Characteristics,,0 1,8 UB max. without load M07_a 1, 1, UB max. atimax. U U B N 1, 1,0 0,8 OA 8: Operating voltage limit curve 8 7 Switching cycles AgSnO 0 0, 0, 0, 0,8 1,0 1, 1, 1, 1,8,0 M000_d Switching capacity P[kVA] OA 8: Contact service life (at t u = 0 C) Switching cycles 7 7, 7, 0, C Ambient temperature OA 7, OA 8: Operating voltage limit curve P max. for OA 71/7 OW model OA model 0 0, 1,0 1,,0,, Switching power P[kVA ] OA 7, OA 8: Contact service life (at t u = 0 C) M07 a Switching voltage U [ V] , 0, 0, 0,8 1 8 M001 Switching voltage U [ V ] Imax for OA 71/7 0, 0, 0,7 Switchingcurrent I [A] 7, 1 M07 a Switching current I --- Safe switch off, no standing arc max.1 switching cycle/s [A] Safe switch-off,no standing arc max.1 switching cycle/s Arc extinguishing during switchover time of contacts, max. 1 switching cycles/s OA 8: Limit curve for arc-free operation (at t u = 0 C) OA 7, OA 8: Limit curve for arc-free operation (at t u = 0 C) Characteristic is valid for: - inductive load - capacitive load The actual number of cycles with reactive loads n blind is can be calculated as follows: n blind = n ohmic x F OA 8, OA 7, OB 9: Reduction factor for inductive loads en / 7
3 Characteristics UB UN T Spmax =f( U,T,I B ) U K at 0% ED 1, 1, 1,1 1,0 0,9 0,8 0,7 1 I=I K Kmin I K=A I K=1A M07_a U Bmin =f(t Sp ) 1 Example: * for max. voltage or max. coil resistance (at t e >s... 0% ED) known: T U =0 C, I K =A requested: U Bmax? solution: U Bmax = 1,0xUN known: I K =I Kmin, U B =1,1UN requested: TU zul? solution: TU zul = C * for operating behaviour of the relay known: relay "cold", i.e. T Sp=T U [with T U =0 C] requested: U Bmin? solution: U Bmin =0,77xUN 0, T U [ C] known: Relais "hot", i.e. T Sp >TU [with TSp -> C but according to 1 or TUca. 0 C) requested: U Bmin? solution: U Bmin =0,98xUN ,9 1 1,1 1, 1, 1,9 I K = continuous current R W = resistance in hot state R N = nominal coil resistance T U = ambient temperature T Sp = actual coil temperature U B = opertating voltage applied U N = nominal voltage T Sp[ C] RW RN OB 9: Operating voltage limit curve Switching cycles n ohmic Swichting power P[kW] M08_a Switching voltage U [V DC] ,1,,, 1 1 Switching current I[A DC] M09_a DC-drive AC-drive Comment Graph is valid for: - clear resistive load (cos =1) -AC 0V OB 9: Contact service life Contact distance > 0, mm Grapic only for resistive DC-loads at max.1 switching cycle/s - safe switch-off -no standing arc At voltages <DCV max. 00 W can be switched. OB 9: Limit curve for arc-free operation (at t u = 0 C) en / 7
4 Standard Variants OA 8 Nominal voltage Resistance at Voltage range AgSnO 0 C + µm Au DC V DC V W Nominal voltage 1) DC V OA 7, OA 8 Voltage range V Resistance at 0 C W OA 7.11 AgSnO OA mm Au OA Nominal voltage Voltage range ) Resistance at AgSnO DC V AC V V W (±%).01/.11/.01/.11/ OB en / 7
5 Ordering Example Accessories OA 8. / _ OA 7. / _.1 = changeover contacts.0 = NO contacts.0 = NC contacs Socket ET Fixing clip Functionmodule Socket OB 9. / Accessories.01 = 1 NO contact.11 = 1 changeover contact.01 = NO contact.11 = changeover contact Socket for DIN-rail incl. fixing clip Socket ET 11.0 Fixing clip M90_a Socket Socket ET Fixing clip Functionmodule Functionmodule Socket Function module ET11.91: DC V, with free-wheel diode and green LED Article number 0088 ET11.911: DC V, with free-wheel diode and red LED Article number M89_a M88_a ET11.91: AC/DC V, with varistor and green LED Article number 009 ET11.9: DC 0 V, with free-wheel diode and red LED Article number 00 M79_a Screw terminals Cage clamp terminals Socket incl. fixing clip ET 11.01: with screw terminals Article number 0071 ET 11.0: with screw terminals and safe separation Article number 0097 ET 11.07: with cage clamp terminals Article number Socket for DIN-rail incl. fixing clip incl. safe separation between ciol and contacts according to DIN EN 097-1, DIN EN 1, DIN EN 00 Degree of protection Terminals: IP 0 DIN EN 09 Terminal designation: DIN EN 000 Wire connection ET 11.01, ET 11.0: mm solid (1-0 AWG) mm stranded (1-0 AWG) mm sleeved end (1 - AWG) ET 11.07: x ( ) mm solid (1 - AWG) x ( ) mm stranded (1 - AWG) x ( ) mm sleeved end (1 - AWG) Wire fixing: box terminals or cage clamp terminals Mounting: DIN-rail DIN EN 071 Weight: ET 11.01: ET 11.0: ET 11.07: approx. 8. g approx.. g approx. g M79_a Dimensions Width x height x depth: ET 11.01: ET 11.0: ET 11.07: 1.8 x 7 x 9 mm 1.8 x 7 x 7 mm 1.8 x 97 x 7. mm en / 7
6 E. DOLD & SÖHNE KG D-7811 Furtwangen PO Box 11 Telephone (+9) 77 / -0 Telefax (+9) 77 / - dold-relays@dold.com internet: en / 7
Installation / Monitoring Technique
Installation / Monitoring Technique VARIMETER RCM Residual Current Monitor, Type B for AC and DC Systems IP 5883 0249633 IP 5883 ND 5018/035 ND 5018/030 According to IEC/EN 62 020, VDE 0663 For AC and
More informationPower Electronics. POWERSWITCH Semiconductor Contactor BF 9250, BH 9250
Power Electronics POWERSWITCH Semiconductor Contactor, BH 9250 02342 According to IEC/E 60 947-4-2, IEC/E 60 947-4-3 1-, 2- and 3-pole models Load current up to 50 A For AC load up to 480 V Switching at
More informationSafety Technique. Emergency Stop Module With Time Delay BH 5928, BI 5928
Safety Technique safemaster Emergency Stop Module With Time Delay BH 5928, BI 5928 0226419 BH 5928 BI 5928 Function Diagram According to - Performance Level (PL) e and category 4 to E ISO 13849-1 2008
More informationPower Electronics. POWERSWITCH Solid-State Contactor BF 9250, BH 9250
Power Electronics POWERSWITCH Solid-State Contactor, BH 9250 02342 According to IEC/E 60 947-4-2, IEC/E 60 947-4-3 1-, 2- and 3-pole models Load current up to 50 A For AC load up to 480 V Switching at
More informationSafety Technique. SAFEMASTER Emergency Stop Module With Time Delay BH 5928, BI 5928
Safety Technique SAFEMASTER Emergency Stop Module With Time Delay BH 5928, BI 5928 0226419 BH 5928 BI 5928 Function Diagram According to - Performance Level (PL) e and category 4 to E ISO 13849-1 2008
More informationInstallation- / Monitoring technique
Installation- / Monitoring technique ifferential current monitor IP 5883, Type B for AC and C systems varimeter 0249633 IP 5883 N 5018/035 N 5018/030 According to IEC/EN 62 020, VE 0663 To detect earth
More information48 SERIES. Relay interface modules 8 A CO forcibly guided contacts relay interface modules,15.8 mm wide Type 48.12
48 Relay interface modules 8 A 48 2 CO forcibly guided contacts relay interface modules,15.8 mm wide Type 48.12 2 CO 8 A s Relay with forcibly guided contacts according to EN 50205 Type 35 mm rail (EN
More information2 Pole CO, 8 A Plug-in 2 CO (DPDT) 1 CO (SPDT) 8/15 16/25* 250/ /400 2,000 4, /0.5/ /0.5/ (5/5) 300 (10/5)
46 Series - Relays for railway applications 8-16 A 46 SERIES Features Plug-in power relays: 8 A, 2 pole 16 A, 1 pole Complies with EN 45545-2:2013 (protection against fire of materials), EN 61373 (resistance
More informationRelay interface modules A
4C SЕRIES Relay interface modules 8-10 - 16 A Escalators Road / tunnel lighting Hoists and cranes Carousel warehouses Control panels Panels for electrical distribution FINDER reserves the right to alter
More information2 pole (1 NO + 1 NC) 1 NO + 1 NC 2 NO + 2 NC, 3 NO + 1 NC 4 NO + 2 NC Rated current / Max. peak current Rated load AC1
Features 7S.12...5110 7S.14...0220/0310 7S.16..0420 Relay module with forcibly guided contacts 7S.12 with 2 pole (1NO + 1 NC) 7S.14 with 4 pole (2 NO + 2 NC and 3 NO + 1 NC) 7S.16 with 6 pole (4 NO + 2
More information62 Series - Power relays 16 A. Features / /
6 Series - Power relays 6 A Features 6. / 6.3 6.-0300 / 6.3-0300 Printed circuit mount 6 A Power relay & 3 Pole changeover contacts or NO ( 3 mm contact gap) AC coils & DC coils Reinforced insulation between
More information3.5 mm contact pin pitch 1 Pole 12 A PCB direct or via socket
41 Series - Low profile PCB relays 8-12 - 16 A Features 41.31 41.52 41.61 1 & 2 Pole - Low profile (15.7 mm height) 41.31-1 Pole 12 A (3.5 mm pin pitch) 41.52-2 Pole 8 A (5 mm pin pitch) 41.61-1 Pole 16
More information40 Series - Miniature P.C.B. Relays A
..4..4..4 40 Series - Miniature P.C.B. Relays 8-0 - 6 A - P.C.B. or plug-in mount - AC, DC, sensitive DC or single bistable coil versions available - 8 mm, 6 kv (./0 µs) between coil and contacts - Ambient
More informationAC/DC. Monitoring Technique. VARIMETER IMD Insulation monitor RN 5897/300
Monitoring Technique VARIMETER IMD Insulation monitor RN 5897/300 0274214 Your Advantages For mobile generator sets according to DIN VDE 0100-551 Preventive fire and system protection Detection of symmetric
More information60 Series - General purpose relays 6-10 A. Features Plug-in mount 10 A General purpose relay
Series - General purpose relays - 0 A Features Plug-in mount 0 A General purpose relay.. & pole changeover contacts Cadmium Free contacts (preferred version) AC coils & DC coils UL Listed (certain relay/socket
More information48 Series - Relay interface modules A. Features
Series - Relay interface modules 8-0 - 6 A Features & Pole relay interface modules, 5.8 mm wide. Ideal interface for PLC and electronic systems.3 - Pole 0 A.5 - Pole 8 A.6 - Pole 6 A coils or sensitive
More informationmm wide Low coil power PCB or 93 series sockets. Copper side view. 1 CO (SPDT) 6/10 250/400 1, /0.2/ (12/10) AgNi
34 Series - Slim electromechanical PCB relays 6 A Features 34.51 Ultra-slim 1 Pole - 6 A relay Printed circuit mount - direct or via PCB socket 35 mm rail mount - via screw or screwless sockets 1 Pole
More informationSafety Technique. SAFEMASTER Emergency Stop Module LG 5925
Safety Technique SAFEMASTER Emergency Stop Module LG 5925 072 Functi Diagram push butt O emergency-stop According to - Performance Level (PL) e and category 4 to E ISO 849-1 2008 - SIL Claimed Level (SIL
More information38 Series - Relay interface modules A. Features /
Series - Relay interface modules 0.1-2 - 6-8 A Features 1 Pole - 6 A electromechanical relay interface modules, 6.2 mm wide. Ideal interface for PLC and electronic systems Sensitive DC coil or coil versions
More information38 Series - Relay Interface Modules A
Series - Relay Interface Modules 0.1-2 - 6 A - Relay interface modules for use with PLC systems, mm wide - Sensitive DC coil or AC/DC coil version - Supplied with integral coil - Instant removal of relay
More information3.5 mm contact pin pitch 1 Pole 12 A PCB direct or via socket
8-12 - 16 A Features 41.31 41.52 41.61 1 & 2 Pole - Low profile (15.7 mm height) 41.31-1 Pole 12 A (3.5 mm pin pitch) 41.52-2 Pole 8 A (5 mm pin pitch) 41.61-1 Pole 16 A (5 mm pin pitch) PCB mount - direct
More information58 SERIES. Relay interface modules 7-10 A 58.P3 58.P4
58 58 3 & 4 CO relay interface modules, 31 mm wide with Push-in terminals Ideal interface for PLC and electronic systems 58.P3 58.P4 Type 58.P3 3 CO 10 A Push-in terminals Type 58.P4 4 CO 7 A Push-in terminals
More informationMiniature Power Relay MSR
V23061 PCB relay for DC voltage, neutral, monostable Features Used as a switching element for electrical separation between low-power control circuits and power load circuits With 8 mm clearance and creepage
More informationRELOG. All-or-nothing Relay
RELOG All-or-nothing Relay Table of Content Page RELOG a system with contact components used in control engineering 3 Survey of the 'All-or-nothing relays' device program included in the RELOG system 3
More information* Short-circuit detection at On pushbutton. Applications. Indication. S M6801_a S11 A3 S12 S21 S23 S22 S (+)
Safety technique Emergency stop module BO 5988 safemaster 0221562 Function diagram Pushbutton on Mains or emergencystop () K1 According to EC Directive for machines 98/37/EG According to IEC/E 60204-1
More informationOutput of three-phase motors at 50 Hz and 400 V
RT0, RH Coupling Relays (Interfaces) Description DC operation IEC 0 947 and EN 0 947 (VDE 00) The RT0 coupling relays for switching motors and RH for auxiliary circuits are laid out to the special requirements
More information38 Series - Relay interface modules A
38 Series - Relay interface modules 0.1-2 - 3-5 - 6-8 A Common features Instant ejection of relay by plastic retaining clip Integral coil indication and protection circuit EMR Electromechanical Relays
More information38 Series - Relay interface modules A
38 Series - Relay interface modules 0.1-2 - 3-5 - 6-8 A Common features Instant ejection of relay by plastic retaining clip Integral coil indication and protection circuit 6.2 mm wide EMR - DC, AC or AC/DC
More information30 A rated contacts Flange mount Faston 250 connections. 30 A rated contacts PCB mount - bifurcated terminals. Copper side view
66 Series - Power relays 30 A Features 66.22 66.82 2 Pole Changeover (DPDT) 30 A Power relay 66.22 PCB connections & mount 66.82 Faston 250 connections - Flange mount Reinforced insulation between coil
More information3.5 mm contact pin pitch 1 Pole 12 A PCB direct or via socket
41 Low profile PCB relays 8-12 - 16 41 1 & 2 Pole - Low profile (15.7 mm height) 41.31-1 Pole 12 (3.5 mm pin pitch) 41.52-2 Pole 8 (5 mm pin pitch) 41.61-1 Pole 16 (5 mm pin pitch) PCB mount - direct or
More informationInstallation- / Monitoring Technique
Installation- / Monitoring Technique VARIMETER Insulation fault locator RR 5887 0269248 Product Description 4-channel design The locating current generator RR 5886 in connection with the insulation fault
More information2 or 4 pole changeover contact Plug-in/Faston 187
56 Miniature power relays 56 Plug-in - Power relay, & 4 pole Flange mount option - (Faston 87, 4.8 x 0.5 mm termination) C coils & DC coils Lockable test button and mechanical flag indicator Cadmium Free
More informationSafety Relay H-462. Dimensions LxWxH(in mm) Size 1: 57,8 x20,5 x48,6 Size 2: 67,4 x20,5 x48,6
General 4or 6 contacts Forced guided contact set According to EN 50205, application type A Ambient temperature 25 +80 C Soldering heat resistance 260 C/5s RoHS compliance Signal relay according to UIC
More information62.22 Copper side view
62 Power relays 16 62 Printed circuit mount 16 Power relay 2 & 3 Pole changeover contacts or NO ( 3 mm contact gap) C coils & DC coils Reinforced insulation between coil and contacts according to EN 60335-1,
More informationThe power in relays and timers since Catalogue
The power in relays and timers since 1954 2012 Catalogue PCB relays Industrial relays Relay interface modules Sockets and accessories Timers Monitoring relays Energy meters Surge protection devices Industrial
More informationrelais A mark Relay modules
Relay modules relais Introduction to relay technology Modular DIN rail mounted relays Plug-in DIN rail mounted relays Multiple chassis mounted relays Timer relays The relay modules offer features such
More informationSafety Technique. SAFEMASTER Emergency Stop Module With Time Delay LG 5928
Safety Technique SAFEMASTER Stop Module With Time Delay LG 5928 0258918 Functi Diagram Your advantage Compact, flexible and safe Short respse time Ideal for designs according to the new safety standards
More informationControls Contactors and Contactor Assemblies Special Applications
Controls Contactors and Contactor Assemblies Special Applications Price groups 1B, 1H /2 Introduction More information can be found on the Internet: see the opening information, page 13 - Contactors for
More informationPIR6WT-1Z interface - time relays
1 9-functions electronic time relays compliance with standard PN-EN 612-1 Time relay PIR6WT-1Z consists of: - universal socket with electronic PI6WT-1Z with screw terminals, - changeover relay RM699V,
More informationE-STOP relays, safety gate monitors
Safety relay for monitoring E-STOP pushbuttons, safety gates and light barriers. Approvals Unit features Positive-guided relay outputs: 3 safety contacts (N/O), instantaneous 1 auxiliary contact (N/C),
More information62 Series - Power relays 16 A. Features SERIES / / Printed circuit mount 16 A Power relay
62 Series - Power relays 16 62 SERIES Features 62.22 / 62.23 62.22-0300 / 62.23-0300 Printed circuit mount 16 Power relay 2 & 3 Pole changeover contacts or NO ( 3 mm contact gap) C coils & DC coils Reinforced
More informationIndex. Capacitor Switching - 2 Contactors. Typical Circuit Diagram 2. Auxiliary Contact Blocks 2. Contactors 3. Dimensions 3. Technical Data 4,5,6
Index Index Page Capacitor Switching - 2 Contactors Typical Circuit Diagram 2 Auxiliary Contact Blocks 2 Contactors 3 Dimensions 3 Technical Data 4,5,6 Contactor operation 7 Function 8 Construction 9 Oscillogram
More informationType CP-S, CP-C & CP-A Switch mode
Switch mode power CP-S, CP-C & CP-A Switch mode Characteristics CP-S and CP-C range Output current 5 A, 10 A and 20 A Integrated power reserve of up to 50 % 5 A and 10 A devices with pluggable connecting
More informationDATASHEET - ETR4-70-A. Delivery program. Timing relay, 2W, 0.05s-100h, multi-function, VAC/DC, potentiometer connection
DATASHEET - ETR4-70-A Delivery program Timing relay, 2W, 0.05s-100h, multi-function, 24-240VAC/DC, potentiometer connection Part no. ETR4-70-A Catalog No. 031888 Eaton Catalog No. XTTR6A100H70B EL-Nummer
More informationSIGMA Terminal components
SIGMA Terminal components Optocouplers Content Terminal components Description, Certifications, Authorizations... 151 Ordering details R1000 / R2000 / R 1500... 152 Ordering details - Series RT, PT, MT...
More informationDATASHEET - ETR4-51-A. Delivery program. Technical data General. Timing relay, star-delta, 50 ms, 1W, 3-60s, VAC/DC
DATASHEET - ETR4-51-A Timing relay, star-delta, 50 ms, 1W, 3-60s, 24-240VAC/DC Part no. ETR4-51-A Catalog No. 031884 Eaton Catalog No. XTTR6A60S51B EL-Nummer 0004133308 (Norway) Delivery program Product
More informationMini Contactors. Mini Contactor Relays 4-pole 8 Auxiliary Contact Blocks. Interface Contactor Relays. Mini Contactors 10 Auxiliary Contact Blocks
Mini Contactors Mini Contactor Relays 4-pole 8 Auxiliary Contact Blocks Interface Contactor Relays Mini Contactors 10 Auxiliary Contact Blocks Mini Contactors With Fast On Tab Connectors 12 Mini Contactors
More informationPSR-SCP- 24DC/ESD/5X1/1X2/300
Extract from the online catalog PSR-SCP- 24DC/ESD/5X1/1X2/300 Order No.: 2981428 Safety relay with adjustable delay time 0-300 s, screw version Commercial data EAN 4017918975227 Pack 1 pcs. Customs tariff
More informationMeasuring and monitoring relays CM-SRS.1 Current monitoring relays, single-phase AC/DC
2CDC 251 244 F0t05 Characteristics Monitoring of DC and AC currents: RMS measuring principle One device includes 3 measuring ranges Over- or undercurrent monitoring configurable Hysteresis adjustable from
More informationIndustrial Controls. Catalog IC SIRIUS. Answers for industry.
Industrial Controls Catalog IC 10 2012 SIRIUS Answers for industry. Contactor Relays Siemens AG 2012 Overview Standards IEC 60947-1, EN 60947-1, IEC 60947--1, EN 60947--1 The 3TH42 and 3TH43 contactor
More informationModular step relays 16 A
Automation for blinds, grilles and shutters Lighting control in corridors (for hotels, offices and hospitals) Bedroom light control Living room light control SЕRIES FINDER reserves the right to alter characteristics
More information38 SERIES. Relay interface modules A. EMR Electromechanical Relays. Common features. SSR Solid State Relays. 6.
38 Relay interface modules 0.1-2 - 3-5 - 6-8 - 16 A 38 Common features Instant ejection of relay by plastic retaining clip Integral coil indication and protection circuit 6.2 mm wide EMR - DC, AC or AC/DC
More informationInterface relays and optocouplers Product group picture
Interface relays and optocouplers Product group picture /1 ABB Catalog Electronic Products and Relays 2013/2014 2CDC 1 004 C0209 Interface relays and optocouplers Table of contents Interface Relays and
More informationThermistor motor protection relays
Thermistor motor protection relays Content Benefits and advantages... / 68 Selection table... / 68 Ordering details CM-MSE... / 69 CM-MSS... / 69 CM-MSN... / 7 PTC sensor C0... / 7 Technical data... /
More informationPluggable interface relays CR-P Pcb relays
2CDC 293 034 F0004 1 2 4 3 Features 9 different rated control supply voltages U S : DC versions: 12 V, 24 V, 48 V, 110 V AC versions: 24 V, 48 V, 110 V, 120 V, 230 V Output contacts: 1 c/o (16 A) or 2
More informationPCB relay for DC voltage, polarized, monostable or bistable
V23042 PCB relay for DC voltage, polarized, monostable or bistable Features Universally applicable in the most varied circuit functions in the field of telecommunications and small signal technology Versatile
More informationCapacitor Switching Contactors
Capacitor Switching D385E51 Technical catalogues and news under: www.benedict.at Motor-Starter Mini- Overload Relays Capacitor Switching Motor-Starters Modular Circuit Breakers M4-32T... up to 32A M4-32R..
More informationMicro Contactors. Micro Contactor Relays 10. Micro Contactors 11. Micro Contactors With Solder Pins 12. Coil voltages 12. Micro Reversing Contactor 13
Micro Contactor Relays 10 Micro Contactors 11 Micro Contactors With Solder Pins 12 Coil voltages 12 Micro Reversing Contactor 13 Technical Data 14 Dimensions 18 D946E 9 Micro Contactor Relays 4-pole AC
More informationLow profile safety relay with forcibly guided double contacts FEATURES. Relay height, 14.5mm. 4a2b
Low profile safety relay with forcibly guided double contacts SFN4D RELAY 3.3 33.0 FEATURES Relay complies with EN 020, Type B. Polarized magnet system with snap action function Tolerance ±0.3 mm Weight
More informationStep relays 10 A SЕRIES. Lighting control in corridors (for hotels, offices and hospitals) Bedroom light control. Living room light control
Lighting control in corridors (for hotels, offices and hospitals) Bedroom light control Living room light control SЕRIES FINDER reserves the right to alter characteristics at any time without notice. FINDER
More informationRelays & Sockets RY/RM RY/RM Series Miniature Relays. Part Number Selection
RY/RM Series Miniature Relays Key features: RY (A), RY (A), RM (A) General purpose miniature relays A or A contact capacity Wide variety of terminal styles and coil voltages meet a wide range of applications
More informationPluggable interface relays CR-U Universal relays
Data sheet Pluggable interface relays CR-U Universal relays Pluggable interface relays are used for electrical isolation, amplification and signal matching between the electronic controlling, e.g. PLC
More informationNo-wear isolation of potentials in terminal block design
TERMOPTO Overview No-wear isolation of potentials in terminal block design Space saving solid-state relay with PUSH IN connection technology The TERMOPTO opto modules are characterised by a particularly
More information05/09/2014
48 x 48 Digital LCD Timer 814 Part number 88857005 Relay output digital timers LCD or LED (815E) Multi-range Multi-voltage 1 or 2 relay outputs Reset function on panel (Timers 815, 815E) Data saved in
More informationElectronic timer CT-ERS ON-delayed with 2 c/o contacts Data sheet
1SVR 430 103 F0200 CT-ERS 1 7 2 6 5 4 8 3 1 10 selectable time ranges, from 0.05 s to 300 h 2 Potentiometer with direct reading scale for the fine adjustment of the time delay 3 Sliding switch to set the
More informationPositive-guided relay outputs: 8 safety contacts (N/O), instantaneous. 1 auxiliary contact (N/C), instantaneous
Contact expander module for increasing the number of available contacts Approvals Unit features Positive-guided relay outputs: 8 safety contacts (N/O), instantaneous 1 auxiliary contact (N/C), instantaneous
More informationMasterINTERFACE 39 Series - Relay interface modules
Common features Space saving 6.2 mm wide Connections for 16-way jumper link Integral coil indication and protection circuit Secure retention and easy ejection by plastic clip Dual screw head (blade+cross)
More informationMiniature circuit-breakers S 280 UC series. System pro M. Technical data
Technical data 11 Robbie Rd. / Avon, MA 02322 T:(508)513-1000 F:(508)513-1100 70 Ernest St. / Providence, RI 02905 T:(401)781-7100 www.controllerservice.com System pro M Prior to connection of aluminum
More informationProcess displays For standard signals, temperature, resistance measurement
Features Inputs: Voltage ±10 V, ±200 V / Current ±20 ma / thermocouples J,K,T,N,Pt100,Pt1000 / resistance measurement / potentiometer Display range can be linearised Two limits output Min, Max functions
More informationAll-or-nothing relay RH(M) 1000 in plug-in case and case for top-hat rail or wall mounting
Data Sheet 10/86-2.36-EN All-or-nothing relay RH(M) 1000 in plug-in case and case for top-hat rail or wall mounting Compact robust power relay Type RH(M) 1003: 3 changeover contacts Type RH(M) 1004: 4
More informationMasterINTERFACE 39 Series - Relay interface modules
MasterINTERFACE 39 Series - Relay interface modules Common features Space saving 6.2 mm wide Connections for 16-way jumper link Integral coil indication and protection circuit Secure retention and easy
More information08/07/2015
17.5 mm - 1 Relay 8A MUR1 Part number 88827105 Multi-function or mono-function Multi-range Multi-voltage Screw or spring terminals LED status indicator (relay version) Possibility of external load connection
More informationV2UM230V10 Art.Nr.: V2UM230V10P Art.Nr.: Control elements. Tripping delay. Function selector. Status indication 230 V AC/DC
P AC/DC voltage monitoring Multifunction Supply voltage 24 V DC or 230V AC/DC Supply circuit = Measuring circuit 1 change-over contact Width 22,5 mm Control elements Tripping delay Maximum threshold Minimum
More informationAC/DC. Monitoring Technique. VARIMETER IMD Insulation monitor RN 5897/020
Monitoring Technique VARIMETER IMD Insulation monitor RN 5897/020 0277078 RN 5897/020 RP 5898 Product Description The insulation monitor RN 5897/020 of the VARIMETER IMD family provides best and up to
More information316 PHOENIX CONTACT. RIF-1 for miniature and solid-state relays Page 334. RIF-2 for industrial relays Page 342. RIF-3 for octal relays Page 346
314 PHOENIX CONTACT PHOENIX CONTACT 315 RIF-0 for miniature and solid-state relays Page 328 RIF-1 for miniature and solid-state relays Page 334 RIF-2 for industrial relays Page 342 RIF-3 for octal relays
More informationCurrent monitoring relays CM-SRS.2 for single-phase AC/DC currents
Data sheet Current monitoring relays CM-SRS.2 for single-phase AC/DC currents For the monitoring of currents in single-phase AC/DC systems, ABB s CM range comprises a wide selection of powerful and compact
More information02/11/2015
35 mm - 1 Relay 8A OUR3 Part number 88867103 Multi-function or mono-function Multi-range Multi-voltage Relay output 1 or 2 : 8 A - 250 V (10 A UL) LED status indicator Option of connecting an external
More informationElectronic timer CT-AWS Impulse-OFF with 1 c/o contact Data sheet
2CDC 251 121 F0004 1 5 2 4 3 6 Characteristics Single-function impulse-off timer One device includes 10 time ranges, from 0.05 s to 300 h, for the adjustment of the pulse time Remote potentiometer connection
More informationXU2-AC AC voltage relay. (Februar 1997) Manual XU2-AC (Revision New)
XU2-AC AC voltage relay (Februar 1997) Manual XU2-AC (Revision New) Woodward Manual XU2-AC GB Woodward Governor Company reserves the right to update any portion of this publication at any time. Information
More information02/11/2015
Emergency stop and safety guard monitoring 2 channels KNE3-YS Part number 85102436 "Emergency stop" & "Safety gates monitoring" functions Single and 2-channel operation Security with redundancy and feedback
More informationVoltage monitoring relays CM-ESS.1 for single-phase AC/DC voltages
Data sheet Voltage monitoring relays CM-ESS.1 for single-phase AC/DC voltages For the monitoring of voltages in single-phase AC/DC systems, ABB s CM range comprises a wide selection of powerful and compact
More informationRelays & Sockets RU Series Universal Relays. With Latching or Momentary Lever. Standard (without lever) Key features:
RU Series Universal Relays Key features: Full featured universal miniature relays Designed with environment taken into consideration Two terminal styles: plug-in and PCB mount Non-polarized LED indicator
More informationXUA1 - AC Voltage and phase balance relay
XUA1 - AC Voltage and phase balance relay Contents 1. Applications and features 2. Design 3. Function 3.1 Voltage supervision 3.2 Unbalanced voltage supervision 4. Operation and settings 4.1 Setting of
More information08/07/2015
17.5 mm - 1 Solid State Relay 0.7A MUS2 Part number 88827004 Multi-function or mono-function Multi-range Multi-voltage Screw or spring terminals LED status indicator (relay version) Possibility of external
More informationRelay modules, Relay sockets, Plug relays
, Relay sockets, Plug relays General information Relay input side (coil) Single relays housed in slim, rail mounting enclosures taking up the minimum of space. Multiple relays (up to 24) in compact rail
More informationElectronic timer CT-SDE Star-delta change-over with 1 n/c + 1 n/o contact
Data sheet Electronic timer CT-SDE Star-delta change-over with n/c + n/o contact The CT-SDE is an electronic time relay with star-delta change-over. It is from the CT-E range. The CT-E range is the economic
More informationA rated contacts PCB mount - bifurcated terminals. Copper side view
66 Power relays 30 66 2 Pole Changeover (DPDT) 30 Power relay 66.22 PCB connections & mount 66.82 Faston 250 connections - Flange mount Reinforced insulation between coil and contacts according to EN 60335-1;
More informationLiquid level monitoring relay CM-ENS.2x
Data sheet Liquid level monitoring relay CM-ENS.2x The CM-ENS.2x is served to regulate and control liquid levels and ratios of mixtures of conductive fluids. It can be used for overflow protection, dry
More informationDZD 92 L. Wiring diagram. Time domains. Function. Dimensional drawing. Indicators. Accessories
DZD 92 L Multi-Function - Multi-domain time relay Mono voltage 8 Functions Setting range 0.05 s to 100 h subdivided into 7 time domains 1 immediate-action and 1 time contact or 2 time contacts (adjustable)
More informationCurrent monitoring relays CM-SRS.1 For single-phase AC/DC currents
Data sheet Current monitoring relays CM-SRS.1 For single-phase AC/DC currents The CM-SRS.1 is an electronic current monitoring relay that protects single-phase mains (DC or AC) from over- and undercurrent
More informationThermistor motor protection relays
Thermistor motor protection relays Content Benefits and advantages... / 68 Selection table... / 68 Ordering details CM-MSE... / 69 CM-MSS... / 69 CM-MSN... / 7 PTC sensor C0... / 7 Technical data... /
More informationSafety relays - PSR-SCP- 24DC/ESD/4X1/
Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid
More informationIMPULSE SWITCH, REMOTE SWITCH
W REMOTE SWITCH STELLA W SCHRACK INFO Low switching noise Energy saving function 0.5 30 minutes High switching capacity, 80 A start-up peak LED display LQ540000 W APPLICATIONS 220 The ideal solution for
More informationCurrent monitoring relays CM-SRS.1 for single-phase AC/DC currents
Data sheet Current monitoring relays CM-SRS.1 for single-phase AC/DC currents For the monitoring of currents in single-phase AC/DC systems, ABB s CM range comprises a wide selection of powerful and compact
More informationElectronic timer CT-EBE Flasher starting with OFF, 1 c/o (SPDT) contact
Data sheet Electronic timer CT-EBE Flasher starting with OFF, 1 c/o (SPDT) contact The CT-EBE is an electronic time relay with the function flasher starting with OFF. It is from the CT-E range. The CT-E
More informationEnvironmental Influences. Display. Inputs and Outputs. Electromagnetic Compatibility. Communication Interfaces. Insulation Strenght.
Electricity Meters IEC INDUSTRIAL+COMMERCIAL Landis+Gyr Dialog ZMG310AR/CR TECHNICAL DATA Frequency Nominal Frequency fn 50 or 60 Hz tolerance ± 2 % Mesurement Accuracy Accuracy ZMG310xR active energy
More informationSwitching relay terminal block; Relay with 1 changeover contact (1u); with miniature switching relay
relay - Item No: 89-304 Switching relay terminal block; Relay with changeover contact (u); with miniature switching relay Item No: 89-304 Switching relay terminal block; Relay with changeover contact (u);
More informationA rated contacts Flange mount/faston 250 (6.3 x 0.8 mm) connection
65 Power relays 20-30 65 20 Power relays 1 NO + 1 NC (SPST-NO + SPST-NC) 65.31 Flange mount Faston 250 connections 65.61 PCB mount C coils & DC coils Cadmium Free option available 65.31 65.61 20 rated
More informationRelays, Timers, Interface Modules, Sockets and Accessories Catalogue. The power in relays and timers since 1954
Relays, imers, Interface Modules, Sockets and Accessories. 003-004 Catalogue he power in relays and timers since 954 he power in relays ISO 900 ISO 400 Our four factories produce over 50,000 relays every
More informationElectronic timer CT-YDE Star-delta change-over with 1 c/o (SPDT) contact
Data sheet Electronic timer CT-YDE Star-delta change-over with c/o (SPDT) contact The CT-YDE is an electronic time relay with star-delta change-over. It is from the CT-E range. The CT-E range is the economic
More information