DIGITAL / ANALOG HiTESTER SERIES
|
|
- Sheila Gordon
- 5 years ago
- Views:
Transcription
1 DIGITAL / ANALOG HiTESTER SERIES Multi Meters A Full Line-up of Digital and Analog Multimeters Suit Any Need From Basic Testing High Performance Analysis
2 2 POCKET SIZE DMM SERIES New product information / / New insulated sleeves prevents short-circuits Conforms safety standard IEC (revised) for hand-held probes Cap attached Detachable! When a cap is not attached, the test leads can be used in a CATII environment. No caps attached the tip of test leads? DANGER of short-circuit accident!! No Cap attached What are the new and additional requirements of the international safety standards? 1. "Exposed metal part must be 4mm or shorter" (Previously, 19mm max.) for CAT III and IV environments prevent short-circuits from occurring. 2. Double-coating with different colors enables you the wear status of the test leads. (Previously, single-coated) included as a standard accessory (This cap cannot be attached previous products) Previous model Category Cap attached No cap attached Model number CAT IV 300V 300V CAT III 300V 600V 600V CAT II 600V 600V 600V Measurement categories (Overvoltage categories) NEW! Service Entrance Distribution Panel With a cap attached the tip of test leads, short-circuit accidents can be prevented. Service Drop Power Meter Internal Wiring Fixed Installation T Outlet To ensure safe operation of measurement products, IEC establishes safety standards for various electrical environments, categorized as CAT I CAT IV, and called measurement categories. These are defined as follows. CAT I CAT II CAT III CAT IV : Secondary electrical circuits connected an AC electrical outlet through a transformer or similar device. : Primary electrical circuits in equipment connected an AC electrical outlet by a power cord (portable ols, household appliances, etc.) : Primary electrical circuits of heavy equipment (fixed installations) connected directly the distribution panel, and feeders from the distribution panel outlets. : The circuit from the service drop the service entrance, and the power meter and primary overcurrent protection device (distribution panel). Higher-numbered categories correspond electrical environments with greater momentary energy, so a measurement product designed for CAT III environments can endure greater momentary energy than one designed for CAT II. Using a measurement product in an environment designated with a higher-numbered category than that for which the product is rated could result in a severe accident, and must be carefully avoided. Never use a CAT I measuring product in CAT II, III, or IV environments. The measurement categories comply with the Overvoltage Categories of the IEC60664 Standards.
3 CARD HiTESTER Compact! Palm size body. Less than 1cm thin! POCKET SIZE DMM SERIES 3 lonly 9.5 mm thick and 60 g in weight l4199 count display l Test leads fit neatly inside the case. laumatic power saving function saves your batteries even when you forget turn off the power. DC Voltage mv/ V/ V/ V/ 500 V ±0.7 %rdg. ±4dgt. AC Voltage V/ V/ V/ 500 V ±2.3 %rdg. ±8dgt. Resistance W/ kw/ kw/ kw/ MW/ MW ±2.0 %rdg. ±4dgt. Continuity W *Buzzer sounds at approx 50W± 40W or less ±2.0 %rdg. ±4dgt. Dimensions :Approx.55W 109H 9.5D mm (2.17 W 4.29 H 0.37 D) Mass :Approx. 60 g (2.1 oz.) SOLAR HiTESTER Environmentally-friendly DMM Hard case Hard case (1) Cap (red 1, black 1) lhybrid power system incorporates both a solar-charged main battery and a backup battery lvest-pocket sized CATIII (600V) and CATIV (300V) conformance (Cap attached) l Neat test probe srage in the back of the unit laumatic power saving (after 30 minutes), au and manual range selection and a display-hold function are included. DC Voltage mv/ V/ V/ V/ 600 V ±1.3 %rdg. ±4dgt. AC Voltage V/ V/ V/ 600 V ±2.3 %rdg. ±8dgt. Resistance W/ kw/ kw/ kw/ MW/ MW ±2.0 %rdg. ±4dgt. Continuity W *Buzzer sounds at approx 50W± 40W or less ±2.0 %rdg. ±4dgt. Dimensions :Approx. 60W 135H 23D mm (2.36 W 5.31 H 0.91 D) Mass :Approx. 140 g (4.9 oz.) PENCIL HiTESTER Pencil-type DMM with Penlight Carrying case (1) Cap (red 1, black 1) In addition being compact, this pencil-type tester comes with au-range and data hold functions for incredibly easy measurement of electrical and electronic circuitry. lfull-au ranging, 4199 count display lpenlight brightly illuminates test points l Overload protection 600 V (Ω and continuity functions) Backlight LCD DC Voltage mv/ V/ V/ V/ 600 V ±1.3 %rdg. ±4dgt. AC Voltage V/ V/ V/ 600 V ±2.3 %rdg. ±8dgt. Resistance W/ kw/ kw/ kw/ MW/ MW ±2.0 %rdg. ±4dgt. Continuity W *Buzzer sounds at approx 50W± 40W or less ±2.0 %rdg. ±4dgt. Diode Check Judgment only (0.3V 2.0V) Dimensions :Approx. 30W 182H 26.5D mm (1.18 W 7.17 H 1.04 D) Mass :Approx. 80 g (2.8 oz.) Cap (red 1, black 1) Penlight Penlight brightly illuminates test points
4 4 Multi-function DMM SERIES A Complete HIOKI Digital Multimeter Line-up Suit Your Needs Selection guide From Basic Testing High Performance Analysis Basic Specifications AC measurement method Mean Mean True RMS Mean Mean True RMS True RMS True RMS Maximum display count DCV : Best Accuracy ±0.5 %rdg. ±4dgt. ±0.5 %rdg. ±0.5 %rdg. ±0.6 %rdg. ±0.09 %rdg. ±0.09 %rdg. ±0.03 %rdg. ±5dgt. ±0.025 %rdg. ±5dgt. Dual display l l Bar graph display l l l l l l l Display backlight function l l l CAT IV 600V 600V 600V CAT III 600V 600V 1000V 600V 600V 600V 1000V 1000V CAT II 1000V 1000V 1000V 1000V 1000V Range DC Voltage AC Voltage DC Current AC Current Resistance Capacitance ( * 2 Conductance ) mv mv CLAMP (ACA) function* 1 10A 1000A 419.9W 41.99MW mv mv 42.00μA 42.00μA 420.0W 42.00MW mv mv 42.00μA 42.00μA 420.0W 42.00MW mv 399.9mV 1000V 399.9μA 399.9μA 399.9W 39.99MW mv V mv V μa 9.99 A μa 9.99 A W MW μf mf mv V mv V μa 9.99 A μa 9.99 A W MW μf mf mv V mv V μa A μa A W MW (* nS) nf mf mv V mv V μa A μa A W MW (* nS) nf mf AC+DC l Temperature l l l Frequency l l l l l Frequency counter l DUTY ratio l l l Pulse width l l Contact Check Buzzer l l l l l l l l Function Peak hold l l Recording l l l l l l Refresh hold (HOLD AUTO) l l l l l l Trigger hold (HOLD) l l l l l l l l Relative (REL)display l l l l l l Percentage display (4-20mA/0-20mA) l l l l Temperature difference between 2 points l Harmonic Ratio l Decibel display (dbm/dbv) l l Pulse output l * 1 Clamp-on probe : Option
5 Multi-function DMM SERIES 5 DIGITAL HiTESTER High-precision, high-resolution, and multi-functional handy DMMs Dual display shows different two parameters simultaneously Useful backlight function for use in dark locations. Record maximum, minimum and average values in the internal memory USB communication function for PC measurement (optional) AC+DC measurement mode / pulse output function ( only) Main Differences Best DC Accuracy ±0.025 %rdg. ±5dgt. ±0.03 %rdg. ±5dgt. AC+DC l Frequency counter l Pulse output l OPTION Pulse Output Function ( only) l Frequency settings: 0.5, 1, 2, 5, 10, 15, 20, 25, 30, 40, 50, 60, 75, 80, 100, 120, 150, 200, Use as a control or standard signal source for measurement systems or electronic circuits. l Duty cycle setting range: 0.39% 99.60% 240, 300, 400, 480, 600, 800, 1200, 1600, 2400 or 4800 Hz Pulse frequency and duty cycle (or pulse width) can be l Pulse width settings: 1/frequency specified. l Amplitude: fixed 2.8 V l Output impedance: 3.5 kω or less / Function Range Best Accuracy DC Voltage mv/ mv/ mv 5./ V/ V/ V ±0.025 %rdg. ±5dgt. ±0.03 %rdg. ±5dgt. AC Voltage mv/ mv/ mv 5./ V/ V/ V ±0.4 %rdg. ±25dgt. ±0.6 %rdg. ±25dgt. DC Current μa/ μa/ ma/ ma A/ A ±0.05%rdg. ±25dgt. ±0.1%rdg. ±25dgt. AC Current μa/ μa/ ma/ ma A/ A ±0.7%rdg. ±20dgt. ±0.8%rdg. ±20dgt. Resistance W/ kw/ kw/ kw MW/ MW ( only MW) ±0.05%rdg. ±5dgt. ±0.08%rdg. ±5dgt. Conductance ns ±1.0%rdg. ±10dgt. ±1.0%rdg. ±10dgt. Continuity Threshold value :Buzzer sounds less than 1000 counts for each range. Capacitance nf/ nf/ 999.9nF μf/ μf/ μf/ 9.999mF/ mf ±1.5%rdg. ±5dgt. ±1.5%rdg. ±5dgt. Frequency Hz/ Hz khz/ khz/ kHz ±0.02%rdg. +3dgt. ±0.02%rdg. ±3dgt. Temperature Thermocouple Type Range Accuracy K C ( F) ±0.3%rdg. ±3 C J ( only) C ( F) (±0.3%rdg. ±6 F) Accuracy does not include temperature probe error Response time:60 minutes (main unit reference contact temperature compensation) Dimensions :Approx. 100W 202H 57D mm (3.94 W 7.95 H 2.24 D) including protective holster Mass :Approx. 680 g (24.0 oz.) including protective holster and battery TEST LEAD (1) Holster (1) CARRYING CASE 3853 COMMUNICATION PACKAGE (USB) TEMPERATURE PROBE *9180 *9183 TEMPERATURE PROBE CLIP ON BASE *9617 (for capacitance measurement) CLIP TYPE LEAD *9618 (for capacitance measurement) COMMON OPTIONS / / / / 3803 COMMUNICATION PACKAGE (USB) Includes application software and USB cable for transferring test data the PC. User-cusmizable and programmable add remote control functions. l Operating environment: Windows 2000, XP, Vista* l Acquisition interval: 1 second 99 hours (3803: 1 999sec) l Transfer: Up 65,525 data points (3803:Up 32,700 data points) l Other functions:header settings, save files in CSV format *Windows 2000, XP, Vista are registered trademarks of Microsoft Corp.,USA
6 6 Multi-function DMM SERIES DIGITAL HiTESTER 3803 Compact and basic DMM 4000 count display full scale Optional USB package for transferring data captured by the 3803 a PC DC Voltage mv/ V/ V/ V/ ±0.6 %rdg. AC Voltage mv/ V/ V/ V/ ±2.0 %rdg. DC Current μa/ 3999 μa/ ma/ ma/ A ±1.5%rdg. AC Current μa, 3999 μa, ma, ma, A ±2.0%rdg. Resistance W/ kw/ kw/ kw/ MW/ MW ±0.6%rdg. ±3dgt. Continuity W *Beeper will sound if the resistance falls below 34.5Ω and will sp if resistance exceeds 35.0Ω. Diode 1.999V ±1.0%rdg. Dimensions :Approx. 83W 178H 58D mm (3.27 W 7.01 H 2.28 D) including protective holster,not including protrusion Mass :Approx. 400 g (14.1 oz.) (with a battery and protective holster) OPTION TEST LEAD (1) Holster (1) DIGITAL HiTESTER High-precision, high-resolution, and multi-functional handy DMMs CARRYING CASE 3853 COMMUNICATION PACKAGE (USB) HIGH-VOLTAGE PROBE *9014 Record maximum / minimum / average value Relative value display Simple performance and low cost, Basic accuracy ±0.09 % PC communication via USB (using optional accessories) only For Power line disrtion check (Harmonic disrtion % display) Temperature scanning function (T1, T2, T1-T2) Temperature only Thermocouple Type Range Accuracy K C ( F) ±0.3%rdg. ±3 C J C ( F) (±0.3%rdg. ±6 F) Accuracy does not include temperature probe error. Response time:60 minutes (main unit reference contact temperature compensation time) / OPTION Function Range Best Accuracy DC Voltage mv/ V/ V/ V ±0.09 %rdg. ±0.09 %rdg. AC Voltage mv/ V/ V/ V ±1.2 %rdg. ±5dgt. ±1.0 %rdg. ±5dgt. DC Current μa/ 9999 μa/ ma/ ma/ 9.99 A ±0.1%rdg. ±3dgt. ±0.1%rdg. ±3dgt. AC Current μa/ 9999 μa/ ma/ ma/ 9.99 A ±1.2%rdg. ±5dgt. ±1.0%rdg. ±5dgt. Resistance W/ kw/ kw/ kw/ MW/ MW ±0.3%rdg. ±3dgt. ±0.3%rdg. ±3dgt. Capacitance μf/ μf/ μf/ 9.999mF ±2.0%rdg. ±5dgt. ±2.0%rdg. ±5dgt. Frequency Hz/ Hz/ Hz/ khz/ khz /999.9 khz n/a ±0.03%rdg. ±3dgt. Continuity Buzzer sounds at a resistance equivalent or less than 100 counts (±5%) for each range. Diode 2.100V ±0.3%rdg. ±0.3%rdg. Dimensions :Approx. 83W 178H 58D mm (3.27 W 7.01 H 2.28 D) including protective holster, not including protrusions Mass :Approx g (13.8 oz.), g (14.1 oz.) including protective holster and battery TEST LEAD (1) Holster (1) CARRYING CASE 3853 COMMUNICATION PACKAGE (USB) only TEMPERATURE PROBE *9180 *9183 TEMPERATURE PROBE CLIP ON BASE *9617 (for capacitance measurement) CLIP TYPE LEAD *9618 (for capacitance measurement)
7 Multi-function DMM SERIES 7 DIGITAL HiTESTER Terminal shutter interlock mechanism Terminal shutter interlock mechanism exposes only the correct terminals for connection in the currently selected function Wide range, maximum reading 4200 digit High-speed response, bar graph display Conforms with IEC1010 Au-hold function aumatically displays voltage or current value and resistance value Fail-safe! Shutter mechanism prevents incorrect test lead connection Single operation / /-51 Model (MEAN) with carrying case (MEAN) with holster (True RMS) with carrying case (True RMS) with holster Voltage ranges Only V and COM terminals open Simple operation with rotary switch 10A range Only A and COM terminals open * The above phograph shows a demonstration model with a transparent cover. DC Voltage mv/ V/ V/ V/ ±0.5 %rdg. AC Voltage mv/ V/ V/ V/ ±1.2 %rdg. ±3dgt. DC Current μa/ μa/ 4200 μa/ ma/ ma/ A ±1.5%rdg. ±4dgt. AC Current μa/ μa/ 4200 μa/ ma/ ma/ A ±2.5%rdg. ±5dgt. Resistance W/ kw/ kw/ kw/ MW/ MW ±0.7%rdg. Frequency Hz/ Hz/ kHz/ kHz/ 500.0kHz ±0.02%rdg. ±1dgt. Continuity W *Buzzer sounds at approx 50W± 40W or less Diode 2.00V ±5.0%rdg. Dimensions :Approx. 76W 167H 33D mm (2.99 W 6.57 H 1.30 D) Mass :Approx. 260 g (9.2 oz.) TEST LEAD (1) Holster ( , ) CARRYING CASE 9378 ( , ) HIGH-VOLTAGE PROBE *9014 CARRYING CASE (for , ) (True RMS) DIGITAL HiTESTER Tough for use on industrial power lines Built-in current limiter and fuse capable of withstanding prevent short-circuit accidents Wide range, maximum reading 4199 digit Two-terminal configuration eliminates the need for probe reconnections Industrial grade test leads for enhanced safety DC Voltage mv/ V/ V/ V/ ±0.5 %rdg. ±4dgt. AC Voltage mv/ V/ V/ V/ ±1.2 %rdg. ±4dgt. AC Current 10A 1000A, 7ranges with optional clamp ±2.0%rdg. ±4dgt. Resistance W/ kw/ kw/ kw/ MW/ MW ±0.7%rdg. ±4dgt. Continuity W *Buzzer sounds at approx 50W± 40W or less Diode check Yes(3..4V/850μA max. open terminal voltage) ±1.0%rdg. Dimensions :Approx. 70W 145H 31D mm (2.76 W 5.71 H 1.22 D) Mass :Approx. 210 g (7.4 oz.) TEST LEAD (1) CARRYING CASE 9371 CLAMP ON PROBE (AC500A) CRAMP ON PROBE (AC1000A) CONVERSION ADAPTER 9704 (Input: BNC, Output: banana)
8 Analog Multimeters and Voltage Meters HiTESTER Basic tester with improved safety features Protected against transient voltages up 250 V AC, preventing electric shock accidents before they can happen Drop proof design withstands dropping on a concrete floor from a height of 1 meter Temperature measurement support (with optional probes) THERMISTER TEMPERATURE PROBE (for temperature measurement) *HIGH-VOLTAGE PROBE 9017 up 30 kv DC CAT III 600V MULTI TESTER 3008 For maintenance service Designed for maintenance of high power lines Drop proof design withstands dropping on a concrete floor from a height of 1 meter High-power fuse protects up 50,000A Supply current limiting resistance of 10-ohm restricts short circuit current SPECIFICATIONS 0.3 V (16.7 k-ohm/v), 3/12/30/120/300/600 V (20 k-ohm/v) DC Voltage range Accuracy: ±2.5 % f.s. 12 V (9 k-ohm/v) Accuracy: ±4 % f.s. AC Voltage range 30/120/300/600 V (9 k-ohm/v) Accuracy: ±2.5 % f.s. Average rectifier effective value 0 3 k-ohm ( center scale 30 ohm), R 1, R 10, R 100, R 1 k Resistance range ±3 % of scale length 60 μa/30 m/300 ma (300 mv internal voltage drop) DC Current range Accuracy: ±3 % f.s. Battery check: V, load resistance 10 ohm Other functions Temperature: C (Thermister Temperature Probe is necessary, sold separately) Complies with EN61010 Installation Category III Safety considerations (anticipated transient overvoltage 6000 V), Pollution Degree 2 Power supply R6P(AA) 2 batteries 95 mm(3.74 in)w 141 mm(5.55 in)h 39 mm(1.54 in)d, Dimensions, mass 280 g (9.9 oz) TEST LEAD (1), fuse (1), CARRYING CASE 9390 (1) To prevent electric shock, a fuse for protection up a commercial power supply of 250V is integrated in the internal circuitry of Model Please note that the fuse is not intended for preventing damage the unit. SPECIFICATIONS DC Voltage range 6/30/60/300/600 V (20 k-ohm/v) Accuracy: ±2.5 % f.s. AC Voltage range 6/30/150/300/600 V (10k-ohm/V) Accuracy: ±2.5 % f.s. Average rectifier effective value Resistance range 0 10 k-ohm ( center scale 100 ohm), R 1, R 10, R 100 ±3 % of scale length Safety considerations Protection:1A rated, guaranteed current 50,000A high-power fuse and 10 ohm resisr for restricting short circuit current Power supply R6P(AA) 2 batteries Dimensions, mass 94 mm(3.70 in)w 134 mm(5.28 in)h 56 mm(2.20 in)d, 350 g (12.3 oz) TEST LEAD 9060 (1), fuse (1), CARRYING CASE (1) SAFETY HiTESTER 3258 Voltage measurement safety assured by non Metallic contact testing SPECIFICATIONS Non-Metallic contact for optimum safety Capture the voltage value of covered electric wires Also ideal for metallic busbars and terminals Optimized for 400V AC circuits Measure voltage on insulated electric cables V ±1.5%rdg. ±5dgt. AC Voltage range 380 V 480 V ±2.0%rdg. ±5dgt. (40 66Hz) 600 V 481 V 600 V ±5.0%rdg. ±5dgt. Insulated conducrs (IV or CV equivalent, min. 100 mm 2 Objects of Measurement x-section), bare metal conducrs Note:Not usable on shielded conducrs. Power supply LR6 alkaline battery 6 Dimensions, mass 83W 178H 58D mm (2.01 W H 1.48 D) 670 g (23.6 oz) Soft carrying case (1) Note: Company names and Product names appearing in this catalog are trademarks or registered trademarks of various companies. HEAD OFFICE : 81 Koizumi, Ueda, Nagano, , Japan TEL / FAX / os-com@hioki.co.jp HIOKI USA CORPORATION : 6 Corporate Drive, Cranbury, NJ USA TEL / FAX / hioki@hiokiusa.com HIOKI (Shanghai) Sales & Trading Co., Ltd. : Shanghai Times Square Office, 93 Huai Hai Zhong Road, Shanghai, P.R.China POSTCODE: TEL /0092 FAX / info@hioki.com.cn Beijing Office : TEL /4081 Guangzhou Office : TEL /2676 HIOKI SINGAPORE PTE.LTD. : 33 UBI AVENUE 3, #03-02 VERTEX, SINGAPORE TEL FAX info@hioki.com.sg HIOKI INDIA PRIVATE LIMITED : Khandela House, 24 Gulmohar Colony Indore (M.P.), India TEL , FAX / info@hioki.in All information correct as of Jan. 24, All specifications are subject change without notice. DISTRIBUTED BY DMMs_E1-11E
DIGITAL / ANALOG HiTESTER SERIES
DIGITAL / ANALOG HiTESTER SERIES Multi Meters A Full Line-up of Digital and Analog Multimeters Suit Any Need From Basic Testing High Performance Analysis 2 A Complete HIOKI Digital Multimeter Line-up Suit
More informationINSULATION TESTER SERIES. Flip the Cover. A Full Line-up of Insulation Testers to Suit Any Need. From Basic Testing to High Performance Analysis
INSULATION TESTER SERIES Field measuring instruments A Full Line-up of Insulation Testers to Suit Any Need Flip the Cover From Basic Testing to High Performance Analysis 2 INSULATION TESTER SERIES Selection
More informationA Full Line-up of Digital and Analog Clamp Meters to Suit Any Need
CLAMP ON HiTESTER SERIES Field measuring instruments A Full Line-up of Digital and Analog Clamp Meters to Suit Any Need From Basic Testing to High Performance Analysis 2 Selection Guide A Complete HIOKI
More informationA Full Line-up of Digital and Analog Clamp Meters to Suit Any Need
CLAMP ON HiTESTER SERIES Field measuring instruments A Full Line-up of Digital and Analog Clamp Meters to Suit Any Need From Basic Testing to High Performance Analysis 2 Selection Guide A Complete HIOKI
More informationRS-232C. 3801, 3802 (High-accuracy) 3803, 3804, 3805 (Economically priced) & DIGITAL HiTESTER. Support efficient data collection.
2004 3801, 3802 (High-accuracy) 3803, 3804, 3805 (Economically priced) & DIGITAL HiTESTER Field measuring instruments Support efficient data collection RS-232C communication All HiTESTERs For Personal
More informationINSULATION TESTER SERIES
INSULATION TESTER SERIES Field measuring instruments A Full Line-up of Insulation Testers to Suit Any Need From Basic Testing to High Performance Analysis 2 INSULATION TESTER SERIES Selection guide IR4056-20
More informationField Measuring Instruments. solutions for contractors, utilities and fi eld maintenance. Battery Testing. Clamp Testers. Insulation Testing
Field Measuring Instruments 2011 solutions for contractors, utilities and fi eld maintenance Battery Testing Clamp Testers Insulation Testing Power Analysis Voltage Testing Multimeters Electrical Construction
More informationA Full Line-up of Digital and Analog Clamp Meters to Suit Any Need
CLAMP ON HiTESTER SERIES Field measuring instruments A Full Line-up of Digital and Analog Clamp Meters to Suit Any Need From Basic Testing to High Performance Analysis 2 Selection Guide A Complete HIOKI
More informationStandard models. Introducing a line of field-optimized instruments that can be chosen based on the application at hand
Featuring the world s fastest DMM engine* The DT4200 series features a dedicated IC that Hioki developed in-house in order to deliver unprecedented speed. *According to Hioki research conducted in April
More informationDIGITAL MULTIMETER DT4200 Series
DIGITAL MULTIMETER DT4200 Series DMM Super Fast Response Rate and Safety Features Take Professional Testing to a Higher Level High-End Models DT4281 / 4282 Standard Models DT4251 / 4252 / 4253 Pocket Models
More informationRS-232C. 3801, 3802 (High-accuracy) 3803, 3804, 3805 (Economically priced) & DIGITAL HiTESTER. Support efficient data collection.
3801, 3802 (High-accuracy) 3803, 3804, 3805 (Economically priced) & DIGITAL HiTESTER Field measuring instruments 2001 Support efficient data collection RS-232C communication All HiTESTERs For Personal
More informationDIGITAL MULTIMETER DT4200 Series
DIGITAL MULTIMETER DT4200 Series DMM / Testers Super Fast Response Rate and Safety Features Take Professional Testing to a Higher Level Made in Japan for rock-solid quality. 2 Hazard 1 Prevent unavoidable
More informationAC/DC CLAMP METER CM4371, CM4373
AC/DC CLAMP METER CM4371, CM4373 Field measuring instruments CM4371 : 600 A AC/DC CM4373 : 2000 A AC/DC Speedy Performance of Professional Testing Made in Japan for rock-solid quality. Rugged clamp meters
More informationWide-band Models from DC to 100 MHz
CLAMP SENSOR Wide-band Models from to 1 MHz CLAMP ON PROBE 3276 1 CLAMP ON PROBE 3273-5 to 3276 Because current measurement requires the insertion of a shunt or a CT, the task often becomes difficult due
More informationCLAMP ON HiTESTER SERIES
CLAMP ON HiTESTER SERIES Field Measuring Instruments A Full Line-up of Digital and Analog Clamp Meters to Suit Any Need From Basic Testing to High Performance Analysis 2 Selection Guide A Complete HIOKI
More informationDIGITAL HiTESTER. Instruction Manual
3801-0 DIGITAL HiTESTER Instruction Manual i Contents Contents Introduction...1 Verifying Package Contents...1 Safety Information... Operating Precautions... 1 Overview 7 1.1 Product Overview...7 1. Features...8
More informationHigh-precision portable RESISTANCE METER
8 High-precision portable RESISTANCE METER measures from µω to MΩ Features High-precision specs in a portable package(high accuracy of 0.02% rdg.) Design is ideal for maintenance and testing/measurement
More informationA Full Line-up of Digital and Analog Clamp Meters to Suit Any Need
CLAMP ON HiTESTER Series A Full Line-up of Digital and Analog Clamp Meters to Suit Any Need From Basic Testing to High Performance Analysis Please see www.hioki.com for list of supported regions. 2 Selection
More informationElectrical Measuring Instruments. Vol.3.
Electrical Measuring Instruments GENERAL CATALOG ol.3 www.kaise.com Contents Clamp Meters Insulation Testers Earth Tester Digital Multimeters Automotive Testers Other Testers Accessories Digital Clamp
More informationWide-band Models from DC to 100 MHz
CLAMP SENSOR Wide-band Models from DC to 1 MHz 3273-5 - 3276 CLAMP ON PROBES http://www.hioki.co.jp/ HIOKI company overview, new products, environmental considerations and other information are available
More informationField Measuring Instruments
2014 Field Measuring Instruments Solutions for Maintenance, Repair and Operations Electrical Measuring Instruments from Shinshu Ueda This year, HIOKI is celebrating the 79th anniversary of our founding
More informationFor support the Investigation and the measures of the noise disorder. NOISE HiLOGGER NOISE SEARCH TESTER
NOISE HiLOGGER 3145-20 NOISE SEARCH TESTER 3144-20 Optical and Network Measurement Instruments For support the Investigation and the measures of the noise disorder l Specially designed for on-site noise
More informationAC/DC CLAMP METER CM4370 series
AC/DC CLAMP METER CM4370 series CM4371, CM4372 : 600 A AC/DC CM4373, CM4374 : 2000 A AC/DC Speedy Performance of Professional Testing Made in Japan for rock-solid quality. Rugged clamp meters for the toughest
More informationINSULATION TESTER SERIES Selection guide
INSULATION TESTER SERIES Selection guide Model IR4056 IR4057 IR4053 IR4016 to IR4018 3490 3455 Basic Specifications (Bar graph) Analog Meter IR4016 IR4017 IR4018 Analog Meter backlight function 3 3 3 3
More information1587/1577. Insulation Multimeters. Technical Data. Two powerful tools in one.
Test Equipment Depot - 800.517.8431-99 Washington Street Melrose, MA 02176 - TestEquipmentDepot.com 1587/1577 Insulation Multimeters Technical Data Two powerful tools in one. The Fluke 1587 and 1577 Insulation
More informationHigh-speed DMM. DIGITAL HiTESTER 3239 (4-terminal Ω function) 3238 (Advanced model) 3237 (Economically priced)
DIGITAL HiTESTER 3239 (4-terminal Ω function) 3238 (Advanced model) 3237 (Economically priced) Field measuring instruments Outstanding performance for production lines with a sampling rate of 3.3 ms High-speed
More informationNOTE: Fully read and understand this manual before using this Digital Multimeter.
ASTROAI USER MANUAL AUTO RANGING DIGITAL CLAMP METER Thank you for purchasing the Auto Ranging Digital Clamp Meter from AstroAI. The AstroAI Auto Ranging Digital Clamp Meter is designed to be safely and
More informationSTANDBY MODE OFF MODE. POWER HiTESTER. Accurate evaluation of consumption power of electrical products. An Energy Saving Support Tool
An Energy Saving Support Tool POWER HiTESTER Power Measuring Instruments 3332 STANDBY MODE OFF MODE Single-phase, 2-wire type that can accurately measure even standby power Accurate evaluation of consumption
More informationCATALOG including...
2002 CATALOG including... http://www.hioki.co.jp/ HIOKI company overview, new products, environmental considerations and other information are available on our website. 1 Advanced Instruments to Meet International
More information1587/1577 Insulation Multimeters
1587/1577 Insulation Multimeters Technical Data Two powerful tools in one. The Fluke 1587 and 1577 Insulation Multimeters combine a digital insulation tester with a full-featured, true-rms digital multimeter
More information3239 (4-terminal Ω function) 3238 (Advanced model) 3237 (Economically priced) DIGITAL HiTESTER Field measuring instruments.
2004 3239 (4-terminal Ω function) 3238 (Advanced model) 3237 (Economically priced) DIGITAL HiTESTER Field measuring instruments Outstanding performance for production lines with a sampling rate of 3.3
More informationINSULATION / VOLTAGE WITHSTAND TEST INSTRUMENT SERIES
2001 INSULATION / VOLTAGE WITHSTAND TEST INSTRUMENT SERIES Safety Standards Measuring Instruments 3153 3159 3158 3154 ISO14001 JQA-E-90091 http://www.hioki.co.jp/ HIOKI company overview, new products,
More informationAC/DC CLAMP METER CM4370 series
AC/DC CLAMP METER CM4370 series CM4371, CM4372 : 600 A AC/DC CM4373, CM4374 : 2000 A AC/DC Speedy Performance of Professional Testing Made in Japan for rock-solid quality. Rugged clamp meters for the toughest
More informationMS8250A/B OPERATION MANUAL MS8250A. Hz% FUNC REL RANGE REL HOLD OFF 10A. Hz% A NCV. Hz% COM. A ma 10A FUSED 600V CAT IV.
MS8250A/B DIGITAL MULTIMETER OPERATION MANUAL AUTO DC AC REL hfe PCLINK % C F kmωkz nµmfav MS8250A DIGITAL MULTIMETER Auto Power Off RANGE REL HOLD FUNC NCV A ma OFF 10A A ma 10A FUSED 600V CAT IV COM
More informationWide-band Models from DC to 100 MHz
CLAMP ON PROBE 327 series AC/DC CURRENT SENSOR CT686 series 99 Washington Street Melrose, MA 2176 Phone 781-665-14 Toll Free 1-8-517-8431 Visit us at www.testequipmentdepot.com Wide-band Models from DC
More informationData sheet IDM 99III Digital Multimeter
RS Stock No. 7575116 Data sheet IDM 99III Digital Multimeter Feature: 6000 count digital display with 62 segment bar graph Extra Large scale display and white backlit AC+DC True RMS 0.08% basic DCV accuracy
More informationData sheet IDM 98III Digital Multimeter
RS Stock No. 7575110 Data sheet IDM 98III Digital Multimeter FEATURE: 6000 count digital display with 62 segment bar graph Extra Large scale display and white backlit AC+DC True RMS 0.1% basic DCV accuracy
More informationENGLISH. Datasheet Stock No RS PRO IDM 99III Digital Multimeter. Feature: 6000 count digital display with 62 segment bar graph
ENGLISH Datasheet Stock No. 123-3249 RS PRO IDM 99III Digital Multimeter Feature: 6000 count digital display with 62 segment bar graph Extra Large scale display and white backlit AC+DC True RMS 0.08% basic
More informationENGLISH. Datasheet Stock No RS PRO IDM 98III Digital Multimeter. Feature: 6000 count digital display with 62 segment bar graph
ENGLISH Datasheet Stock No. 123-3248 RS PRO IDM 98III Digital Multimeter Feature: 6000 count digital display with 62 segment bar graph Extra Large scale display and white backlit AC+DC True RMS 0.1% basic
More informationDIGITAL HiTESTER 3237, 3238, 3239
DIGITAL HiTESTER,, 3239 4-terminal Ω function Advanced model Economically priced 3239 Outstanding performance for production lines with a sampling rate of 3.3 ms High-speed 5 1 /2 digit DMM The DIGITAL
More informationModel ST Instruction Manual. True RMS Autoranging Digital Multimeter. reedinstruments. www. com
Model ST-9933 True RMS Autoranging Digital Multimeter Instruction Manual reedinstruments com Table of Contents Safety... 3 Features... 4 Specifications...4-8 Technical...4-5 Accuracy...5-8 Display Description...
More informationDVM98. True RMS Digital Multimeter. 1 Safety information. 1.1 Preliminary. 1.2 During use
True RMS Digital Multimeter DVM98 1 Safety information This multimeter has been designed according to IEC - 1010 concerning electronic measuring instruments with an overvoltage category (CAT II) and pollution
More informationRugged, Professional and Ready for the Field MR MEMORY HiCORDER. Capture high- to low-voltage signals in a single device
MEMORY HiCORDER MR8880-20 Recorders Capture high- to low-voltage signals in a single device Rugged, Professional and Ready for the Field CAT III 600 V insulation performance Maximum 600V AC/DC input -
More informationOPERATOR S INSTRUCTION MANUAL
OPERATOR S INSTRUCTION MANUAL AUTO-RANGE DUAL DISPLAY CONFORMED IEC1010 DIGITAL MULTIMETER CONTENTS PAGE SAFETY INFORMATION..... DESCRIPTION.. OPERATING INSTRUCTION.. SPECIFICATIONS.... ACCESSORIES. BATTERY
More informationINSULATION / WITHSTANDING Test Instrument series 3153/3159/ST5520
INSULATION / WITHSTANDING Test Instrument series 3153/3159/ST5520 3153 3159 Not CE Marked ST5520 This electrical safety test instrument series is designed for insulation resistance and voltage withstand
More informationAPPA 300 Series. The Most User-Friendly High Performance Multimeter
APPA 300 Series The Most User-Friendly High Performance Multimeter Throw Away the Manual... So Easy, So Simple Straight Forward... For basic application, simply to operate these keys... "LIGHT" "BAR" "DIGIT"
More informationIDEAL INDUSTRIES, INC. TECHNICAL MANUAL MODEL: MODEL: Multimeter Service Information
IDEAL INDUSTRIES, INC. TECHNICAL MANUAL MODEL: 61-340 MODEL: 61-342 Multimeter Service Information The Service Information provides the following information: Precautions and safety information Specifications
More informationMS2109A AC/DC Clamp Meter. User Manual. Contents
MS2109A AC/DC Clamp Meter User Manual Contents 1. Safety information 1 1.1 Preparation 1 1.2 Usage 1 1.3 Signs and Labels 2 1.4 Maintenance 2 2. Description 2 2.1 Part name 3 2.2 Switch and button description
More informationDigital Multimeter Series
Digital Multimeter Series Series Series of 4.5-digit Handheld Multimeters Series of 3.5-digit Handheld Multimeters Series of 3.5-digit Handheld Multimeters of 3.5-digit Pocket Digital Multimeter Pocket
More informationSUBJECT TO CHANGE WITHOUT NOTICE
www.sifamtinsley.co.uk DATASHEET Multifunction Meters Transducers & Isolators Temperature Controllers Converters & Recorders Digital Panel Meters ijunior / JUNIOR Current Transformers Analogue Panel Meters
More informationMS8250D DUAL DISPLAY DIGITAL MULTIMETER User s Manual
DUAL DISPLAY DIGITAL MULTIMETER User s Manual MS8250D 1. Safety Information Warning Use caution and follow all safety guidelines to prevent electric shock or damage to the meter. Please ready carefully
More informationAC/DC CLAMP METER AC CLAMP METER CM4000 series
AC/DC CLAMP METER AC CLAMP METER CM4000 series NEW Coming Spring 2019 Please see www.hioki.com for list of supported regions. Models with Bluetooth support: CM4372, CM4374, CM4376, CM4142 CAT Ⅳ 600V CAT
More informationThank you again for choosing AstroAI, if you have any questions or concerns regarding your product, please contact us at
ASTROAI USER MANUAL DT132A 4000 Count Auto-Ranging Multimeter Thank you for purchasing the AstroAI DT132A 4000 Count Auto-Ranging Multimeter. It is a 3 ¾ digit, 3999 counts, auto-ranging digital multimeter.
More informationLCR METER Series. A New Series of LCR Meters to Meet Your Applications. From Production Lines to Research and Development
LCR METER Series Component measuring instruments From Production Lines to Research and Development A New Series of LCR Meters to Meet Your Applications New LCR METER Models IM3523, IM3533, and IM3533-01
More informationFluke 83V and 87V Digital Multimeters
Fluke 83V and 87V Digital Multimeters Detailed Specifications For all detailed specifications: is given as ±([% of reading] + [number of least significant digits]) at 18 C to 28 C, with relative humidity
More informationDIGITAL MULTIMETERS. Accuracy +5% Resolution 1pF Accessories Test leads, Manual, 9V Battery included Options ST-265, C-90, C W x 6 L x 1.
DIGITAL MULTIMETERS Model M-1700 Model M-2775 Frequency to 20MHz Diode and Transistor Test AC/DC Current to 10A Three Way Overload Protection Extra Large 1 display test Data Hold Frequency to 20MHz Transistor
More information79/26 Series III Multimeter
79/26 Series III Multimeter Instruction Sheet W Read First: Safety Information Never use the meter if the meter or test leads look damaged. Be sure the test leads and switch are in the correct position
More informationCurrent Clamp. 210
Our range of devices includes clamp meters for measuring current leaks, AC and DC current, voltage, power, resistance, continuity, capacitance or frequency. Some clamp meters have a clearly arranged display
More information770E DIGITAL MULTIMETER OPERATOR S MANUAL
770E DIGITAL MULTIMETER OPERATOR S MANUAL TABLE OF CONTENTS 1.Overview... 1 2.Panel Layout...1/2 3. Safety information... 2 4. Specical cautions for operation.... 2 5.General specifications...2/3 6.Testing
More informationAC/DC DIGITAL CLAMP METER OPERATION MANUAL
AC/DC DIGITAL CLAMP METER OPERATION MANUAL HYS005661 A0 ACCESSORIES 6. ACCESSORIES 1) Test Leads: Electric Ratings 1000V 10A 1 pair (set) 2) Operating Manual 1 copy 3) 1.5V AAA Battery 3 piece - - 55 -
More informationIDM 503 & 505 Digital Multimeters
Instruction Manual IDM 503 & 505 Digital Multimeters IDM 505 SECTION 1 SAFETY INFORMATION Safety Information Understand and follow operating instructions carefully. Use the Instrument only as specified
More informationCompact Autoranging Clamp Meters. Models (400 A AC), (400 A AC/DC)
User Manual Compact Autoranging Clamp Meters with NIST-Traceable Calibration Models 20250-55 (400 A AC), 20250-56 (400 A AC/DC) THE STANDARD IN PRECISION MEASUREMENT 1065DGMAN_20250-55,-56 DS Clamp Meter
More informationDIGITAL DUAL DISPLAY AC/DC CLAMP METER MODEL-860A OPERATION MANUAL
DIGITAL DUAL DISPLAY AC/DC CLAMP METER MODEL-860A OPERATION MANUAL DIGITAL DUAL DISPLAY AC/DC CLAMP METER MODEL-860A TABLE OF CONTENTS TITLE PAGE Safety Information Safety Symbols... 1 Meter Description...
More informationAC/DC CLAMP METER AC CLAMP METER CM4000 series
AC/DC CLAMP METER AC CLAMP METER CM4000 series NEW NEW CM4375 CM4376 1000 A AC/DC max CM4141 CM4142 2000 A AC max Please see www.hioki.com for list of supported regions. Models with Bluetooth support:
More informationBATTERY HiTESTER BT3563, BT3562, 3561
BATTERY HiTESTER BT3563, BT3562, 3561 Simultaneous high-speed measurement of internal resistance and battery voltage From large-cell to high-voltage battery testing - HIOKI is The Choice The BT3563, BT3562,
More informationUSER MANUAL. Model MA A AC Mini Clamp-on Meter. Additional User Manual Translations available at
USER MANUAL Model MA150 200A AC Mini Clamp-on Meter Additional User Manual Translations available at www.extech.com Introduction Thank you for selecting the Extech MA150 AC Mini Clamp Meter. This device
More information1.General instructions Specifications Description...7
USER S Manual CONTENTS 1.General instructions...1 1.1 Precautions safety measures...1 1.1.1 Preliminary...1 1.1.2 During use...2 1.1.3 Symbols...4 1.1.4 Instructions...5 1.2 Protection mechanisms...6 2.
More informationMS8268 HANDHELD DIGITAL MULTIMETER OPERATOR S INSTRUCTION MANUAL
MS8268 HANDHELD DIGITAL MULTIMETER OPERATOR S INSTRUCTION MANUAL Table of Contents TITLE PAGE 1. GENERAL INSTRUCTIONS 1 1.1 Precaution safety measures 1 1.1.1 Preliminary 1 1.1.2 During use 2 1.1.3 Symbols
More informationUser's Guide. 800 Amp AC/DC True RMS Clamp Meter. Model EX Washington Street Melrose, MA Phone Toll Free
User's Guide 99 Washington Street Melrose, MA 02176 Phone 781-665-1400 Toll Free 1-800-517-8431 Visit us at www.testequipmentdepot.com 800 Amp AC/DC True RMS Clamp Meter Model EX730 Introduction Congratulations
More informationMS8250D DUAL DISPLAY DIGITAL MULTIMETER User s Manual
DUAL DISPLAY DIGITAL MULTIMETER User s Manual MS8250D Introduction MS8250D is a stable, safe, reliable compact digital handheld 6600 count, True RMS, auto-ranging multimeter. This meter can measure AC/DC
More informationPen-type DIGITAL MULTITESTER
BST-MT267 Pen-type DIGITAL MULTITESTER INSTRUCTION MANUAL Index 1. Introduction... 2. Safety Notes... 3. Features... 4. Specifications... 5. General... 6. Instrument Layout... 7. Measurement... 8. Maintenance...
More information400Amp True RMS AC/DC Clamp Meter Model EX613
User's Guide 400Amp True RMS AC/DC Clamp Meter Model EX613 Introduction Congratulations on your purchase of this Extech EX613 True RMS Clamp Meter. This meter measures AC Current, DC Current, AC/DC Voltage,
More informationDL-91 DL-92 DL-94 DL-97
DL-91 DL-92 DL-94 DL-97 (Accuracy 0.5%) (Accuracy 0.3%) (Accuracy 0.1%) (Accuracy 0.06%) OUTLINE These four digital multimeters of the DL-90 Series have been designed to meet the diversifying needs users
More informationDVM1190 DIGITAL MULTIMETER
DIGITAL MULTIMETER 1. Introduction Thank you for buying the. This digital multimeter has a large LCD, a data-hold function and a backlight. The device uses a very practical safety mechanism that keeps
More information2000 A DCA/ACA CLAMP + DMM,
2000 A DCA/ACA CLAMP + DMM, true rms DCA/ACA CLAMP METER Model : CM-9930 Your purchase of this DCA/ACA CLAMP METER marks a step forward for you into the field of precision measurement. Although this CLAMP
More informationFluke 1587 FC/1577 Insulation Multimeters
TECHNICAL DATA Fluke 587 FC/577 Insulation Multimeters The High-Performance 2-in- Insulation DMM The Fluke 587 FC and 577 Insulation Multimeters combine a digital insulation tester with a full-featured,
More informationINSTRUCTION MANUAL CLAMP ON PROBE
INSTRUCTION MANUAL 3275 CLAMP ON PROBE Contents Introduction 1 Inspection 1 Notes on Safety 1 Notes on Use 4 Chapter 1 Overview 9 1.1 Product Overview 9 1.2 Features 9 1.3 Names of Parts 10 1.4 Parts
More informationUSER MANUAL 600A AC Clamp Meter + NCV Model MA610
USER MANUAL 600A AC Clamp Meter + NCV Model MA610 Additional User Manual Translations available at www.extech.com Introduction Thank you for selecting the Extech MA610 Clamp Meter. This meter measures
More informationRESISTANCE HiTESTER 3541
RESISTANCE HiTESTER 3541 Component measuring instruments 0.1 µω (20 mω range) to 110.000 MΩ Measure from very low (µω) to very high (MΩ) resistances with a single instrument Along with capabilities for
More informationFor easy-to-use loggers, look no further! Connect to a tablet, smartphone, or PC for easy, wireless data collection
WIRELESS MINI LOGGER LR8512, LR8513, LR8514, LR8515, LR8520 For easy-to-use loggers, look no further! Connect to a tablet, smartphone, or PC for easy, wireless data collection Please see www.hioki.com
More informationUT207A/208A/209A Operating Manual. Table of Contents
Table of Contents Title Overview Unpacking Inspection Safety Information Rules for Safe Operation International Electrical Symbols The Meter Structure Display Symbols Functional Buttons The Effectiveness
More informationSAFETY PRECAUTIONS: Before use, read the following safety precautions
[1] SAFETY PRECAUTIONS: Before use, read the following safety precautions This instruction manual explains how to use your multimeter CD731, CD751 safely. Before use, please read this manual thoroughly.
More informationInsulation Testers and Earth Ground Testers
Insulation Testers and Earth Ground Testers With a 5000 V MegOhmMeter for industrial-strength insulation testing and a range of compact hand-held instruments, we offer a solution for every troubleshooting
More informationIDEAL INDUSTRIES, INC. TECHNICAL MANUAL MODEL:
IDEAL INDUSTRIES, INC. TECHNICAL MANUAL MODEL: 61-352 The Service Information provides the following information: Precautions and safety information Specifications Basic maintenance (cleaning, replacing
More informationHigh-accuracy measurement of standby to operating power
POWER METER PW3335 Single-Phase AC/DC Power Meter High- of standby to operating power Wide measurable range : 10 μa to 30 A, 60 mv to 1000 V Basic for voltage, current and power : ±0.1%* Frequency bandwidth
More informationCONTENTS. SAFETY PRECAUTIONS: Before use, read the following safety precautions
CONTENTS [1] SAFETY PRECAUTIONS: Before use, read the following safety precautions 2 [2] APPLICATION AND FEATURES 5 [3] NAME OF COMPONENT UNITS 6 [4] DESCRIPTION OF FUNCTIONS 8 [5] MEASUREMENT PROCEDURE
More informationLCR METER Series. A New Series of LCR Meters to Meet Your Applications. From Production Lines to Research and Development
LCR METER Series Component measuring instruments From Production Lines to Research and Development A New Series of LCR Meters to Meet Your Applications New LCR METER Models IM3523, IM3533, and IM3533-01
More informationOPERATOR S INSTRUCTION MANUAL M-2625 AUTO RANGING DIGITAL MULTIMETER
OPERATOR S INSTRUCTION MANUAL M-2625 AUTO RANGING DIGITAL MULTIMETER with Temperature Probe Copyright 2007 Elenco Electronics, Inc. Contents 1. Safety Information 3,4 2. Safety Symbols 5 3. Front Plate
More informationInstruction Manual IDM 98-III & IDM 99-III Digital Multimeters
Africa 1 & 2 Indianapolis Street Kyalami Business Park Kyalami, Midrand, South Africa Asia 460 Alexandra Road, #15-01A PSA Building Singapore 119963 Instruction Manual IDM 98-III & IDM 99-III Digital Multimeters
More informationEX350 Series USER GUIDE. True RMS Digital Multimeters. EX350 True RMS Digital Multimeter EX355 True RMS Digital Multimeter with Temperature
USER GUIDE True RMS Digital Multimeters EX350 Series EX350 True RMS Digital Multimeter EX355 True RMS Digital Multimeter with Temperature Table of Contents 1. INTRODUCTION 3 2. SAFETY INFORMATION 4 3.
More informationInstallation Tester and DMM Kits
Installation Tester and DMM Kits Kit Contents: Part Number FLUKE-1652C-CLAMPKIT FLUKE-1652C05-CLAMPKIT FLUKE-1653B-CLAMPKIT/D FLUKE-1653B02-CLAMPKIT/D FLUKE-1654B-CLAMPKIT/D FLUKE-1654B02-CLAMPKIT/D FLUKE-117/TL175/SB
More informationWorld-Class Accuracy & Measurement Range (40 Conventional Models)
AC/DC CURRENT SENSOR CT6904 Ultra-High Performance AC/DC Current Sensor World-Class Accuracy & Measurement Range (40 Conventional Models) 500 A (rms) Rated for measurement of large currents 4 MHz (±3 db)
More information2,000 counts, 200 Amp ACA/DCA, 600 V ACV/DCV, True RMS, OHMS, Continuity, Hold, Peak Hold FORK CURRENT TESTER. Model : FT-9950
2,000 counts, 200 Amp ACA/DCA, 600 V ACV/DCV, True RMS, OHMS, Continuity, Hold, Peak Hold FORK CURRENT TESTER Model : FT-9950 Caution Symbol Caution : * Risk of electric shock! Caution : * Do not apply
More informationPOWER HiTESTER 3331, 3332
An Energy Saving Support Tool POWER HiTESTER 3331, 3332 Power measuring instruments 3332: Single-phase, 2-wire type that can accurately measure even standby power 3331: Single-phase, 3-wire and three-phase,
More informationDM-45 Digital Multimeter
INSTRUCTION MANUAL DM-45 Digital Multimeter Read and understand all of the instructions and safety information in this manual before operating or servicing this tool. Description The Greenlee DM-45 Digital
More informationDawson DDM230C. True RMS Multimeter with Bar Graph Display User s Manual
Dawson DDM230C True RMS Multimeter with Bar Graph Display User s Manual Table of Contents LIMITED WARRANTY AND LIMITATION OF LIABILITY... 3 Out of the Box... 3 Accessories... 4 Safety Information... 4
More informationOWNER S MANUAL HH0308C. AUTO-RANGING DC/True RMS AC DIGITAL MULTIMETER
OWNER S MANUAL HH0308C AUTO-RANGING DC/True RMS AC DIGITAL MULTIMETER IMPORTANT! Read and understand this manual before using the tester. Failure to understand and comply with safety rules and operating
More informationAC/DC CLAMP METER USER S MANUAL
AC/DC CLAMP METER USER S MANUAL CONTENTS PAGE SAFETY INFORMATION SYMBOL EXPLANATION SAFETY PRECAUTIONS 1 1 2 MAINTENANCE 3 GENERAL DESCRIPTION 4 PANEL DESCRIPTION 4 OPERATING INSTRUCTIONS... 7 SPECIFICATIONS
More informationAgilent 970-Series Handheld Multimeters Data Sheet
Agilent 970-Series Handheld Multimeters Data Sheet Benchtop features and performance with handheld convenience and price 3 1 /2and 4 1 /2 digits with dcv accuracy to 0.05% 1 khz to 100 khz frequency response
More information2000 A AC TRUE RMS DIGITAL CLAMP METER WITH NON-CONTACT EF-DETECTION
An ISO 9001:2008 Company 2000 A AC TRUE RMS DIGITAL CLAMP METER WITH NON-CONTACT EF-DETECTION SPECIAL FEATURES : 2000A AC Clamp-on + Full Multimeter ranges AC True RMS Voltage & Current functions Autocheck
More information