SMD Common Mode Filter for Signal Line. PRODUCT IDENTIFICATION 2012 F P - E under development. (1) (2) (3) (4) (5) (6) APPLICATIONS
|
|
- Ophelia Ray
- 5 years ago
- Views:
Transcription
1 Motocraft SMD Common Mode Flter for Sgnal Lne CMF2012F Seres (Sheldng Type) FEATURES Ths common mode flter s characterzed by ts small szed Hghly effectve n nose suppresson,hght common mode mpedance at sgnal band. Due to the low dfferental-mode mpedance wth hgh couplng factor, there s almost no dstorton on hgh speed sgnal. Ths seres s mcro-produced by auto machnes for ts huge productvty and accuracy wth all-day CCD nspecton. Ths seres s based on 2-lne type. The 3- lne type flter wll be CMF PRODUCT IDENTIFICATION 2012 F P - E under development. (1) (2) (3) (4) (5) (6) APPLICATIONS Used for nose suppresson n any electronc. Devces such as (2) personal computer and perpheral equpment (USB), amusement equpment (IEEE 1394), LCD panels (LVDS) etc. (1) Common mode flter Shapes and dmensons (3) wth I core Sheldng Type (4) Impedance at 0MHz 121 : 120Ω (5) Number of Lne 2P : 2-Lne (6) Lead free, RoHS complant. SHAPES AND DIMENSIONS (mm) RECOMMENDED FOOTPRINT Common-Mode Our Product Part Number Impedance Z(Ω) at 0MHz CMF2012F-670-2P-E 67 ±25% CMF2012F-900-2P-E CMF2012F-121-2P-E CMF2012F-161-2P-E 160±25% 0.35 CMF2012F-181-2P-E 0.35 CMF2012F-221-2P-E 220±25% 0.35 CMF2012F-201-2P-E CMF2012F-261-2P-E CMF2012F-371-2P-E 90 ±25% 120±25% 180±25% 200±25% 260±25% 370±25% CMF2012F-601-2P-E 600±25% DC Resstance Rdc(Ω) Max Rated Current Idc(mA) Max Insulaton Resstance (mω)mn Rated Voltage Vdc(V) Wthstandng Voltage Vdc(V) MOTOCRAFT Tel: Fax: Emal:sales@motocraft.com
2 Motocraft SMD Common Mode Flter for Sgnal Lne CMF2012 Seres (UV Type) FEATURES Ths common mode flter s characterzed by ts small szed Hghly effectve n nose suppresson,hght common mode mpedance at sgnal band. Due to the low dfferental-mode mpedance wth hgh couplng factor, there s almost no dstorton on hgh speed sgnal. Ths seres s mcro-produced by auto machnes for ts huge CMF PRODUCT IDENTIFICATION P - E productvty and accuracy wth all-day CCD nspecton. (1) (2) (3) (4) (5) Ths seres s based on 2-lne type. The 3- lne type flter wll be (1) under development. Product name (2) Shapes and dmensons APPLICATIONS (3) Impedance at 0MHz 900 : 90Ω Used for nose suppresson n any electronc. Devces such as (4) Number of Lne 2P : 2-Lne personal computer and perpheral equpment (USB), amusement (5) Lead free, RoHS complant. equpment (IEEE 1394), LCD panels (LVDS) etc. SHAPES AND DIMENSIONS (mm) RECOMMENDED FOOTPRINT Our Product Part Number CMF P-E CMF P-E CMF P-E CMF P-E Common-Mode Impedance Z(Ω) at 0MHz 67 ±25% 90 ±25% 120±25% 180±25% DC Resstance Rdc(Ω) Max Rated Current Idc(mA) Max Rated Voltage Vdc(V) Wthstandng Voltage Vdc(V) Insulaton Resstance (MΩ)Mn. MOTOCRAFT Tel: Fax: Emal:sales@motocraft.com
3 CMF2012-Characterstcs (Impedance vs. Frequency) MOTOCRAFT Tel: Fax:
4 Test Equpment for CMF2012- CMF3216 Seres Impedance Measured by usng Aglent E4991A RF Impedance Analyzer. DC Resstance Measured by usng Chroma 162 mll ohm meter. Insulaton Resstance Measured by usng Chroma Measurement voltage : v,measurement tme : 60 sec. MOTOCRAFT Tel: Fax: Emal:sales@motocraft.com
5 Impedance Test Equpment for CMF2012- Seres Measured by usng Aglent E4991A RF Impedance Analyzer. Measurement termnal DC Resstance Measured by usng Chroma 162 mll ohm meter. Measurement termnal Measurement termnal Insulaton Resstance Measured by usng Chroma Measurement voltage : v,measurement tme : 60 sec. Measurement termnal MOTOCRAFT Tel: Fax: Emal:sales@motocraft.com
6 Relablty Test Operatng temperature : -25 to +85 Storage temp and humdty : 40,70%RH max. Item Specfcatons Test condtons Solder ablty It can be connected on the Apply cream solder to the test crcut board. Recommendaton solderng condton. It s mounted on the recommendaton solderng condton. Termnal The termnal electrode and the ferrte Solder a chp to test substrate, and then laterally apply a strength must not be damaged. load 0.5Kg n the arrow drecton. φ1.0 Test Board Strength on The termnal electrode and the ferrte Solderng a chp to a test substrate, pc board must not be damaged. bend the substrate by 2mm and then return. bendng Wdth sde length Force Dmensons n mm R Test board : Glass base epoxy multplayer board pc board pattern. PC board pattern : Recommended PC board pattern. MOTOCRAFT Tel: Fax: Emal:sales@motocraft.com
7 PRODUCT SPECIFICATION Hgh temperature resstance Appearance : Ferrte shall not be damaged. Impedance : Wthn ±20% of the ntal value. Temperature : +85±2 Appled voltage : Rated voltage Appled current : Rated current Testng tme : 0±12 hours nsulaton resstance: >(MΩ) Measurement : After placng for 24 hours mn. DC resstance : standard value Humdty resstance nsde. Temperature : +85±2 Humdty : 90 to 95%RH Appled current : Rated current Appled voltage : Rated voltage Testng tme : 0±12 hours Measurement : After placng for 24 hours mn. Thermal shock Temperature : -40,+85 kept stablzed for 30 mnutes each. Cycle : 0 cycle Measurement : After placng for 24 hours mn. 1 cycle mn. 30 sec mn. Low Temperature : -40±2 temperature storage Testng tme : 0±12 hours Measurement : After placng for 24 hours mn. Vbraton Appearance : Ferrte shall not be Frequency : to Hz damaged. Ampltude : 1.52 mm Dmenson and tmes : X,Y and Z drectons for 2 hours each. MOTOCRAFT Tel: Fax: Emal:sales@motocraft.com
8 8.0± ± ± ±0.05 Packagng The packagng must be done not to receve any damage durng transportng and storng. Tape dmensons 4.0± ±0.1 φ φ ± ± ±0.1 Dmenson n mm 2.0±0.1 Reel dmensons R φa w t Symbol T φa 180+0,-3 φb 60+1,-0 φb φc 13±0.2 D 2.2±0.5 W 9.0±0.3 t 1.2 φc D R 1 Tappng fgure Top cover tape Carrer tape Sprocket hole Cavty (chp nsert) MOTOCRAFT Tel: Fax: Emal:sales@motocraft.com
9 W B0 Packagng Form There shall not contnuaton more than two vacances of the product. (360 mm) Blank Chp Blank Leader. ( ptches) (70 ptches) K0 Materal of carrer tape : Polystyrene Materal of cover tape : Polyester Cover Tape Peel Strength The force for tearng off cover tape s 0.05~0.69(N) n the arrow drecton at the followng condtons: Temperature : 5 ~ 35 Humdty : 45 ~ 85% Atmospherc pressure : 860 ~ 60 hpa Top cover tape 160 ~ 180 Packng Quantty Base tape φ180 mm reel T type : 2000 pcs./reel Recommended Solderng Condtons (Please use ths product by reflow solderng) Recommended Footprnt Termnaton Number : Please refer to the equvalent crcut n chapter MOTOCRAFT Tel: Fax: Emal:sales@motocraft.com
10 Recommended Reflow Pattern Reflow : untl two tmes Preheat 0sec. Max. sec. Max Natural coolng 1 20sec. Max. 60sec. Mn. Iron Solderng Use a solder ron of less than 30W when solderng,do not allow the solderng ron tp drectly touch the ferrte body outsde of termnal electrode. 2 seconds max. at 280. Attenton n Case of Usng In case of usng product,please avod followng matters: Splashng water or salt water Dew condenses Toxc gas (Hydrogen sulfde, Sulfurous acd,chlorne, Ammona) Vbratons or shocks whch exceed the specfed condton Please be careful for the stress to ths product by board flexure or somethng after the mountng. Others Operatng temperature range : -40~+85 Storage temperature range : -40~+85 Temperature rse : Below 20 Humdty range : 0~90%R.H. MOTOCRAFT Tel: Fax: Emal:sales@motocraft.com
11 Impedance(OHM) Impedance(OHM) Motocraft CMF2012F-Characterstcs (Impedance vs. Frequency) CMF2012F-161-2P-E 00 0 Common Mode Dfferenta l Mode 1 CMF2012F-221-2P-T Frequency(MHz) CMF2012F-221-2P-E Common Mode Dfferenta l Mode Frequency(MHz) MOTOCRAFT Tel: Fax: Emal:sales@motocraft.com
IWHQSeries FEATURES ORDERING CODE. SMD Wirewound Open-Type Chip Inductors (High Q /Frequency) 0805 TRIGON COMPONENTS
CONFIGURATIONS: FEATURES Low DC resistance design is ideal for low loss, high output and low power consumption. Especially high Q factor in this series for customer s design. Resin-coated surface enables
More informationICL Series SMD Wirewound Chip Open-Type Inductors - ICL0603, ICL0805
SMD Wirewound Chip Open-Type s - ICL0603, ICL0805 CONFIGURATIONS: FEATURES Lower profile,high frequency Higher possible SRFs as well as excellent Q Value Higher current in compact size Customer design
More informationSMT Ferrite Chip Inductor SFI201212S Series
Part : SFI201212S SERIES Version : AD Page : 1 / 7 Feature SMT Ferrite Chip Inductor SFI201212S Series Utilizing a miniaturized winding structure. These products provide high Q characteristics. Resin coated
More informationITEM : CHIP POWER INDUCTORS APPROVAL SHEET CHIP POWER INDUCTORS CUSTOMER : DATE :
ESTABLISHMENT 2006. 06. 16 APPROVED REVISION 2006. 12. 19 Series NO:IP061219001 APPROVAL SHEET CHIP POWER INDUCTORS CUSTOMER : DATE : You can reapprove only the changed quality request recorded in spec
More informationMTBF PREDICTION REPORT
MTBF PREDICTION REPORT PRODUCT NAME: BLE112-A-V2 Issued date: 01-23-2015 Rev:1.0 Copyrght@2015 Bluegga Technologes. All rghts reserved. 1 MTBF PREDICTION REPORT... 1 PRODUCT NAME: BLE112-A-V2... 1 1.0
More informationMCP 2.8 mm Contact System and Wire Seal for 1P Starter Motor Connectors
MCP 2.8 mm Contact System and Wre Seal for 1P Starter Motor Connectors Applcaton Specfcaton 114-13295 05 MAY 11 All numercal values are n metrc unts [wth U.S. customary unts n brackets]. Dmensons are n
More informationWire Wound Chip Inductors LPI0805FT Series
INTRODUCTION Product : LPI Miniature SMD Inductor For Power Line Size : 0805 The LPI series are low profile inductor used in notebook, PC, cellular phone backlight, inverter and etc. The devices are designed
More informationFrelTec GmbH. Multilayer Ferrite Chip Inductor SMD
GmbH Mathildenstr. 10A 82319 Starnberg Germany SMD 5/27/2016 1/17 GmbH www.freltec.com SPECIFICATION Part Number 197 05 * 151 * S * J * E02 Type Size Value Material Toleranc e Packing 197 : SMD Multilayer
More informationShur-Plug*.156 Diameter Terminals and Receptacle Contacts
Shur-Plug*.156 Dameter Termnals and Receptacle Contacts Applcaton Specfcaton 114-2042 07 NOV 12 All numercal values are n metrc unts [wth U.S. customary unts n brackets]. Dmensons are n mllmeters [and
More informationSCOPE: (1) SHAPES AND DIMENSIONS (2) ELECTRICAL SPECIFICATIONS SEE TABLE 1
SCOPE: This specification applies to the Pb Free high current type SMD inductors for PRODUCT INDENTIFICATION MSCH - 5750C - 100 M 1 2 3 4 1 Product Code 2 Dimensions Code 3 Inductance Code 4 Tolerance
More informationAMCA R450G-S1F-T3 Pb
FEATURES APPLICATIONS 2450MHz, bandwidth 90MHz Small size - 3.2 x 1.6 x 1.2mm (0.125 x 0.62 x 0.047 inch) Gain 0.5dBi (Peak) / -1dBi (Average) VSWR
More informationantenna antenna (4.139)
.6.6 The Lmts of Usable Input Levels for LNAs The sgnal voltage level delvered to the nput of an LNA from the antenna may vary n a very wde nterval, from very weak sgnals comparable to the nose level,
More informationSCOPE: (1) SHAPES AND DIMENSIONS (2) ELECTRICAL SPECIFICATIONS SEE TABLE 1
SCOPE: This specification applies to the Pb Free high current type SMD inductors for PRODUCT INDENTIFICATION MNR - 4010-4R7 M 1 2 3 4 1 Product Code 2 Dimensions Code 3 Inductance Code 4 Tolerance Code
More informationINPAQ. Specification. WIP201610S L Series. Product Name. Power Inductor. Global RF/Component Solutions
WIP201610S L Series Specification Product Name Series Power Inductor WIP201610S L Series Size EIAJ 2016 WIP201610S L Series Engineering Specification 1. Scope Feature High saturation current realized by
More informationInstruction Sheet AMPMODU* MTE CONNECTORS Mar 11 Rev A
Instructon Sheet AMPMODU* MTE CONNECTORS 408-6919 10 Mar 11 PROPER USE GUIDELINES Cumulatve Trauma Dsorders can result from the prolonged use of manually powered hand tools. Hand tools are ntended for
More informationSMD Common Mode Choke CUWI Series. CUWI Series For HDMI, USB 3.0. Product Identification
CUWI Series For HDMI, USB 3.0 A full series of common mode choke is designed for excellent noise attenuation and compact sizing for use in wide range of applications. Both standard series and custom designs
More informationWIRE WOUND CHIP INDUCTORS HCI SERIES HCI 0805 F T 1R0 K - Introductions. Features. Part Number Code HCI SERIES
HCI SERIES WIRE WOUND CHIP INDUCTORS HCI SERIES Introductions Product : HCI Miniature SMD Inductor For Power Line Size : 0805 The HCI series are low profile inductor used in notebooks, PC s, Cellular phone
More informationPneumatic Power Bench Assembly
Pneumatc Power Bench Assembly 58338-1 Instructon Sheet 408-9393 09 AUG 11 Fgure 1 1. INTRODUCTION Pneumatc Power Bench Assembly 58338-1 s a pneumatc power unt desgned to accept a varety of nterchangeable
More informationRoHS INPAQ TECHNOLOGY CO., LTD. LFA0805 SERIES (LC Filter Array) Engineering Specification
LFA0805 SERIES (LC Filter Array) 1. Scope This specification is applicable to LC Filter Array series product. The customer designed part number drawing take precedence over this specification. The LC Filter
More informationPower Inductors, Shielded
The Shielded Power are low profile, surface-mount inductors. They are designed for power applications or high current applications. Key Features High reliability and easy surface mount assembly Low loss
More informationTime-frequency Analysis Based State Diagnosis of Transformers Windings under the Short-Circuit Shock
Tme-frequency Analyss Based State Dagnoss of Transformers Wndngs under the Short-Crcut Shock YUYING SHAO, ZHUSHI RAO School of Mechancal Engneerng ZHIJIAN JIN Hgh Voltage Lab Shangha Jao Tong Unversty
More informationSMD - Resistors. Pulse Withstanding Thick Film Chip Resistor-SMDP Series. Product: Size: 0603/0805/1206/1210/2010/2512. official distributor of
Product: Pulse Withstanding Thick Film Chip Resistor-SMDP Series Size: 0603///12// official distributor of 1. Scope Pulse Withstanding Thick Film Chip Resistor-SMDP Series -This specification applies to
More informationPassive Filters. References: Barbow (pp ), Hayes & Horowitz (pp 32-60), Rizzoni (Chap. 6)
Passve Flters eferences: Barbow (pp 6575), Hayes & Horowtz (pp 360), zzon (Chap. 6) Frequencyselectve or flter crcuts pass to the output only those nput sgnals that are n a desred range of frequences (called
More informationJuly Common Mode Filters. For high-speed differential signal line, general signal line. ACM series. * Dimensions Code JIS[EIA]
E M C C o m p o n e n t s July 203 Common Mode Filters For high-speed differential signal line, general signal line ACM series ACM202 ACM2520 [0805 inch]* [008 inch] * Dimensions Code JIS[EIA] (2/) REMINDERS
More information(LRP) Metal Strip Chip High Power Low Ohmic Resistor. Token Electronics Industry Co., Ltd. Version: January 12, Web:
Version: January 12, 2017 (LRP) Metal Strip Chip High Power Low Ohmic Resistor Token Electronics Industry Co., Ltd. Web: www.token.com.tw Email: rfq@token.com.tw Taiwan: No.137, Sec. 1, Zhongxing Rd.,
More informationECE315 / ECE515 Lecture 5 Date:
Lecture 5 Date: 18.08.2016 Common Source Amplfer MOSFET Amplfer Dstorton Example 1 One Realstc CS Amplfer Crcut: C c1 : Couplng Capactor serves as perfect short crcut at all sgnal frequences whle blockng
More informationACX Advanced Ceramic X
FB2012 Series Multilayer Chip Band Pass Filter + Balun Features Monolithic SMD with small, low-profile and light-weight type. Applications 0.8 ~ 6 GHz wireless communication systems, including DECT/PACS/PHS/GSM/DCS
More informationMetal Film Precision Resistor. Features
Features -Excellent overall stability -Tight tolerance down to ±0.1% -Extremely low TCR down to ±10 PPM/ C -High power rating up to 1 Watts Applications -Telecommunication -Medical Equipment Construction
More informationShielded SMD Power Inductor
101 Features Dimensions Unit: mm -Directly connected electrode on ferrite core -Available in magnetically shielded -Low DC resistance -Suitable for large current -Available on tape and reel for auto surface
More informationStrain Gauge Measuring Amplifier BA 660
Stran Gauge Measurng Amplfer BA 660 Orgnal of the Manual BA660 / IP20 BA660 / IP66 Table of Contents 1. Safety precautons...2 1.1. Feld of applcaton...2 1.2. Installaton...2 1.3. Mantenance...2 2. Functon...2
More informationTECHNICAL NOTE TERMINATION FOR POINT- TO-POINT SYSTEMS TN TERMINATON FOR POINT-TO-POINT SYSTEMS. Zo = L C. ω - angular frequency = 2πf
TECHNICAL NOTE TERMINATION FOR POINT- TO-POINT SYSTEMS INTRODUCTION Because dgtal sgnal rates n computng systems are ncreasng at an astonshng rate, sgnal ntegrty ssues have become far more mportant to
More informationWIRE WOUND CHIP INDUCTORS SWI SERIES
S SWI SERIES INTRODUCTION The SWI series are wire wound chip inductors widely used in the communication applications such as cellular phones, cable modem, ADSL, repeaters, Bluetooth, and other electronic
More informationWIRE WOUND CHIP INDUCTORS SWI SERIES
S SWI SERIES INTRODUCTION The SWI series are wire wound chip inductors widely used in the communication applications such as cellular phones, cable modem, ADSL, repeaters, Bluetooth, and other electronic
More informationWIRE WOUND CHIP INDUCTORS SWI SERIES
S SWI SERIES INTRODUCTION The SWI series are wire wound chip inductors widely used in the communication applications such as cellular phones, cable modem, ADSL, repeaters, Bluetooth, and other electronic
More informationSMD MELF - Resistors. Metal Film Precision Resistor - SMDM Series Size: 0204/ official distributor of
Product : Metal Film Precision Resistor - SMDM Series Size: 0204/ 0207 official distributor of Metal Film Precision Resistor (SMDM Series) 1. Features -Excellent overall stability -Tight tolerance down
More informationPOLYTECHNIC UNIVERSITY Electrical Engineering Department. EE SOPHOMORE LABORATORY Experiment 1 Laboratory Energy Sources
POLYTECHNIC UNIERSITY Electrcal Engneerng Department EE SOPHOMORE LABORATORY Experment 1 Laboratory Energy Sources Modfed for Physcs 18, Brooklyn College I. Oerew of the Experment Ths experment has three
More information± 0.5 % (1 m to < 2 m ) ± 0.1 % (2 m to 200 m ) Temperature Coefficient. ± 25 ppm/ C (1 m to < 3 m ) Max. (- 55 C to C,
Bulk Metal Technology High Precision, Current Sensing, Power Surface Mount, Metal Strip Resistor with Resistance Value from 1 m, Rated Power up to 3 W and TCR to ± 15 ppm/ C Maximum No minimum order quantity
More informationSCOPE: (1) SHAPES AND DIMENSIONS (2) ELECTRICAL SPECIFICATIONS SEE TABLE 1 (3) CHARACTERISTICS. MSCDRI-104R-SERIES Page 1/8 MAG.
SCOPE: This specification applies to the Pb Free high current type SMD inductors for PRODUCT INDENTIFICATION MSCDRI - 104R - 100 M 1 2 3 4 1 Product Code 2 Dimensions Code 3 Inductance Code 4 Tolerance
More informationSpecifications. Customer Part Number - Customer Specification Number -
Specifications TO: KED USA Drawing No. UKY1C-H1-14E53-00[37] 1/11 Issued Date. Dec,26,2014 Note:Part Number will be revised in case of specification change. Product Type Quartz Crystal Series CX2016DB
More informationLEAD FREE CHIP RESISTOR SPECIFICATION
ASJ PTE LTD LEAD FREE CHIP RESISTOR Reference No. : SYS-ENG-205 Revision No. : Z DOC NO: SYS-ENG-205 PAGE: 2 of 40 1.0 SCOPE..... 3 2.0 PART NUMBERING SYSTEM.... 3 3.0 RATING..... 3 3.1 Rating Power....
More informationBrevis GPS SMD Antenna
1 Features Brevis GPS SMD Antenna Product Specification GPS antenna designed for embedded applications Designed for use with the ground plane extended beneath the antenna High efficiency on a small board
More informationMessrs:Digikey. Preliminary Specifications. Drawing No. Issued Date. Note: Part Number will be revised in case of specification change.
Preliminary Specifications Issued Date. Nov,14,2018 Messrs:Digikey Note: Part Number will be revised in case of specification change. Product Type Series Frequency Quartz Crystal CX2016DB 48000kHz Customer
More informationWIRE WOUND CHIP INDUCTORS SWI SERIES
S SWI SERIES INTRODUCTION The SWI series are wire wound chip inductors widely used in the communication applications such as cellular phones, cable modem, ADSL, repeaters, Bluetooth, and other electronic
More informationCHIP FERRITE BEADS ARRAY
CHIP FERRITE BEADS ARRAY Features 1. Availabe in a wide range of impedance values and providing excellent EMI suppression characteristics for various types of noise. 2. Line(3,4) is achievable with a single
More informationRC Filters TEP Related Topics Principle Equipment
RC Flters TEP Related Topcs Hgh-pass, low-pass, Wen-Robnson brdge, parallel-t flters, dfferentatng network, ntegratng network, step response, square wave, transfer functon. Prncple Resstor-Capactor (RC)
More informationSMD Shielded Wire Wound Power Inductor. TIS4D28QES Series. Features. Applications. Dimensions
SMD Shielded Wire Wound Power Inductor SMD Shielded Wire Wound Power Inductor Features Magnetically shielded construction Compact and thin Large current and low DCR RoHS Compliant Applications DC-DC converter
More informationType CPF Series. Thin Film Precision Resistors. Key Features
Type CPF Series Key Features Thin film precision resistors with TC's to 15ppm and tolerances to 0.05%. Wide range of case sizes from 0201 to 2512 Suitable for all applications where close accuracy and
More informationCyaneus GPS Co-planar Antenna
Product Specification 1 Features GPS antenna designed for embedded applications Balanced antenna technology High efficiency Good resistance to de-tuning Intended for SMD mounting Supplied in tape on reel
More informationSensors for Motion and Position Measurement
Sensors for Moton and Poston Measurement Introducton An ntegrated manufacturng envronment conssts of 5 elements:- - Machne tools - Inspecton devces - Materal handlng devces - Packagng machnes - Area where
More informationMICRO INDUCTORS. Features. Applications. Ordering Information. Shape and Dimensions MI - I J J T (1) (2) (3) (4) (5) (6) (7)
MICRO INDUCTORS Features 1. Very high Self-Resonant Frequencies 2. Ultra miniature size and light(0.6mm mm mm). No polarity 4. Terminal electrode has excellent solder heat resistance for soldering. 5.
More informationEE133 - Lab 6 RF Amplification: The Power Amplifier and LNA (revisited)
Lab 6 - The Power Amplfer and LNA - EE133 - Prof. Dutton - Wnter 2004 1 EE133 - Lab 6 RF Amplfcaton: The Power Amplfer and LNA (revsted) 1 Introducton There wll be no formal Prelab 6 handout. Ths does
More informationCHIP LC FILTERS. Features. Applications. Ordering Information. Shape and Dimensions LC J T (1) (2) (3) (4) (5)
CHIP LC FILTERS Features 1. Newly developed for prominent EMI attenuation at high speed signal line. 2. Terminal electrode has excellent solder heat resistance. Applications 1. High resolution video signal
More informationSPECIFICATION FOR APPROVAL. 1/2W, 0603, Low Resistance Chip Resistor (Lead / Halogen free)
PAGE : 1 OF 7 1/2W, 0603, Low Resistance Chip Resistor (Lead / Halogen free) 1. Scope This specification applies to 0.8mm x 1.6mm size 1/2W, fixed metal film chip resistors rectangular type for use in
More informationChip Inductor INTRODUCTION FEATURE AND APPLICATION. Feature. Application
INTRODUCTION Multilayer Chip Inductor is an electronic part that uses in resonance circuit, for noise suppression and for impedance matching in the electrical circuit. SAMSUNG Electro-mechanics has 2 series
More informationMicroelectronic Circuits
Mcroelectronc Crcuts Slde 1 Introducton Suggested textbook: 1. Adel S. Sedra and Kenneth C. Smth, Mcroelectronc Crcuts Theory and Applcatons, Sxth edton Internatonal Verson, Oxford Unersty Press, 2013.
More informationSunlord Wire Wound SMD Power Inductor Page 1 of 7 SPECIFICATIONS
Sunlord Wire Wound SMD Power Inductor Page 1 of 7 SPECIFICATIONS Customer Product Name Wire Wound SMD Power Inductor Sunlord Part Number SWPA4020S T Customer Part Number [ New Released, Revised] SPEC No.:
More informationNotice for TAIYO YUDEN products
Notice for TAIYO YUDEN products Please read this notice before using the TAIYO YUDEN products. REMINDERS Product information in this catalog is as of October 214. All of the contents specified herein are
More informationNotice for TAIYO YUDEN Products
Notice for TAIYO YUDEN Products [ For High Quality and/or Reliability Equipment (Automotive / Industrial Equipment) ] Please read this notice before using the TAIYO YUDEN products. REMINDERS Product information
More informationSMD Resistor Networks
Product: Size: Thick Film Array Chip Resistor-SMRA Series 42x4 / 63x4 / 42x4(Concave) / 63x4(Concave) 42x8 official distributor of Thick Film Array Chip Resistor-SMRA Series 1. Scope -This specification
More informationSPECIFICATIONS. Metal Film Precision Resistor. CSRV-Serie SWISSDIS. Swissdis AG Grasweg 7 CH-4911 Schwarzhäusern
SWISSDIS Swissdis AG Grasweg 7 CH-4911 Schwarzhäusern Tel.: +41 62 919 44 00 Fax: +41 62 919 44 01 info@swissdis.ch www.swissdis.ch SPECIFICATIONS Metal Film Precision Resistor CSRV-Serie Version August
More informationSCOPE: (1) SHAPES AND DIMENSIONS (2) ELECTRICAL SPECIFICATIONS SEE TABLE 1 (3) CHARACTERISTICS. MSI SERIES Page 1/8 MAG.
SCOPE: This specification applies to the Pb Free high current type SMD inductors for PRODUCT INDENTIFICATION MSI- 700705- R15 M 1 2 3 4 1 Product Code 2 Dimensions Code 3 Inductance Code 4 Tolerance Code
More informationRufa 2.4 GHz SMD Antenna Part No. 3030A5839 / 3030A5887 Product Specification
Product Specification 1 Features Designed for 2.4 GHz applications: Bluetooth, Wi-Fi (802.11b/g), ZigBee, etc. Easy to integrate Low profile design for use with no ground beneath the antenna High efficiency
More informationSPECIFICATIONS. Metal Film Precision Resistor. CSR-Serie SWISSDIS. Swissdis AG Grasweg 7 CH-4911 Schwarzhäusern
SWISSDIS Swissdis AG Grasweg 7 CH-4911 Schwarzhäusern Tel.: +41 62 919 44 00 Fax: +41 62 919 44 01 info@swissdis.ch www.swissdis.ch SPECIFICATIONS CSR-Serie Version June 2017 Features -Excellent overall
More informationSpecification. Drawing No. UKY1C-H1-15B83-00[43] 1/11 Issued Date. Customer Part Number - Customer Specification Number -
Specification Drawing No. UKY1C-H1-15B83-00[43] 1/11 Issued Date. Oct.30,2015 TO: Digi-key Note:In case of specification change, KYOCERA Part Number also will be changed. Product Name Quartz Crystal Product
More informationNotice for TAIYO YUDEN Products
Notice for TAIYO YUDEN Products [ For General Electronic Equipment (General Environment) ] Please read this notice before using the TAIYO YUDEN products. REMINDERS Product information in this catalog is
More informationYAGEO CORPORATION SMD INDUCTOR / BEADS. Notebook computers, step-up and step-down converters. Flash memory programmers, etc...
YAGEO CORPORATION SMD INDUCTOR / BEADS SMD Power Inductors SDS0402 Series These shielded ultra-miniature inductors can help designers achieving significantly longer battery life in handheld communication
More informationVI TELEFILTER Filter Specification TFS 70U - 1/5
Filter Specification TFS 70U - 1/5 1. Measurement condition : Ambient temperature T A: 23 C. Input power level: 0 dbm. Terminating impedances in f c : for input: 50 Ω 0 pf. for output: 50 Ω 0 pf. 2. Characteristics
More informationThin Film Current Sensing Chip Resistor (TCS Series)
(TCS Series) Features -Thin film process -High power rating up to 3 Watts in 2512 size -Tight tolerance down to ±0.5% -Extremely low TCR down to PPM/ C -Resistance values from 50m to 1ohm -High purity
More informationTfs248e.doc version VI TELEFILTER Filter specification TFS 248 E 1/5. D a t a typ. Value Limit
Filter specification TFS 248 E 1/5 Measurement condition Ambient temperature: 23 C Input power level: 0 dbm Terminating impedances at f c *) Input: 560 Ω -5.9pF Characteristics Output: 500 Ω -6.3 pf Remark:
More informationConnector Assemblies 06 JUN 11 Rev C
Applcaton Specfcaton Power Seres 50 114-13071 Connector Assembles 06 JUN 11 All numercal values are n metrc unts [wth U.S. customary unts n brackets]. Dmensons are n mllmeters [and nches]. Unless otherwse
More informationSPECIFICATION FOR APPROVAL. 1/8W, 0402, Low Resistance Chip Resistor (Lead / Halogen Free)
DOCUMENT REVISION : SRK220000NH : A2 SPECIFICATION FOR APPROVAL PAGE : 1 OF 9 1/8W, 0402, Low Resistance Chip Resistor (Lead / Halogen Free) 1. Scope This specification applies to1.0mm x 0.5mm size 1/8W,
More informationSpecifications. Drawing No. USY1M-H / 11 Issued Date.
Specifications Drawing No. USY1M-H1-16426-00 1 / 11 Issued Date. Messrs: KED USA Note: Part Number will be revised in case of specification change. Apr,20,2016 Product Type Quartz Crystal Series CX2016DB
More informationChip Beads & Inductors
Introduction SAMWHA s CB, CBA, CM, CPI series of chip components consist of compact, high performance beads and inductors. Their innovative components and case structures mean low DC resistance and outstanding
More informationVI TELEFILTER Filter Specification TFS 211 C 1/5
Filename: tfs211c.doc version 3.0 23.01.2002 Filter Specification TFS 211 C 1/5 Measurement condition Ambient temperature: 20... 25 C Input power level: 5 ± 2 dbm terminating impedances * Input: 1,1 kω
More informationUltra- Fast Series 110, 125,
Ultra- Fast Seres 0, 25, Applcaton Specfcaton 87, 205, and 250 Fully- Insulated 4-223 FASTON* Termnals 22 FEB 3 Rev H All numercal values are n metrc unts [wth U.S. customary unts n brackets]. Dmensons
More informationA S J ASJ PTE LTD LEAD FREE THIN FILM CHIP RESISTOR SPECIFICATION. Reference No. : SYS-ENG-209. Revision No. : D
ASJ PTE LTD LEAD FREE THIN FILM CHIP Reference No. : SYS-ENG-209 Revision No. : D DOC NO: SYS-ENG-209 PAGE: 2 of 24 1.0 SCOPE...... 3 2.0 PART NUMBERING SYSTEM...... 3 3.0 RATING....... 3 3.1 Rated Power......
More informationMetal Film Precision Resistor. Features
Features -Excellent overall stability -Tight tolerance down to ±0.1% -Extremely low TCR down to ±10 PPM/ C -High power rating up to 1 Watts Applications -Telecommunication -Medical Equipment Construction
More informationMULTIPOLE CONNECTORS SQUICH CN NEW SQUICH. Connections without tools reduced space SQUICH A TIMESAVER
SCREW CONNECTION ULTIPOLE CONNECTORS SQUICH CN SQUICH SQUICH Connectons wthout tools reduced space A TIESAVER SQUICH ULTIPOLE CONNECTORS SQUICH CN SQUICH seres Connectons wthout tools To mprove hgh performance
More informationNotice for TAIYO YUDEN Products [ For General Electronic Equipment ]
Notice for TAIYO YUDEN Products [ For General Electronic Equipment ] Please read this notice before using the TAIYO YUDEN products. REMINDERS Product information in this catalog is as of October 2018.
More information- 01dB = 1dB, - 02dB = 2dB, - 03dB = 3dB, - 04dB = 4dB, - 05dB = 5dB, - 06dB = 6dB, - 07dB = 7dB, - 08dB = 8dB, - 09dB = 9dB, - 10dB = 10dB
AT02M0.09 - Page 1 of 13 Product Family: Part Number Series: Temperature Variable Attenuators ATV112F Series Construction: High purity Alumina Substrate Thermo-sensitive thermistor Ni alloy thin-film resistive
More informationRufa 2.4 GHz SMD Antenna
Product Specification 1 Features Designed for 2.4 GHz applications: Bluetooth, Wi-Fi (802.11b/g), ZigBee, etc. Easy to integrate Low profile design for use with no ground beneath the antenna High efficiency
More informationSpecifications. Customer Part Number - Customer Specification Number - KYOCERA Part Number
Specifications Drawing No. UKY1C-H1-14560-00[40] 1/11 Issued Date. MAY.16,2014 TO: Digi-Key Note:In case of specification change, KYOCERA Part Number also will be changed. Product Name Quartz Crystal Product
More informationFusca 2.4 GHz SMD Antenna
Product Specification 1 Features Designed for 2.4 GHz applications: Bluetooth, Wi-Fi (802.11a/b/g/n), ZigBee, etc. as well as 2.3 GHz WiMAX, 2.5 GHz WiMAX and WiBro. Easy to integrate Low profile design
More informationJuly Common Mode Filters. For high-speed differential signal line (USB2.0, LVDS, etc.) TCM-G series. * Dimensions Code JIS[EIA]
E M C C o m p o n e n t s July 203 Common Mode Filters For high-speed differential signal line (USB2.0, LVDS, etc.) TCM-G series TCM0605G TCM0806G TCM608G [0202 inch]* [0302 inch] [0603 inch] * Dimensions
More informationThin Film Precision Chip Resistor (AR Series)
Construction D1 L (AR Series) Features -Advanced thin film technology -Very tight tolerance down to ±0.01% -Extremely low TCR down to PPM/ C -Wide resistance range 1ohm ~ 3Mega ohm -Miniature size 0201
More informationMica 2.4 GHz SMD Antenna
Product Specification 1 Features Designed for 2.4 GHz applications: Bluetooth, Wi-Fi (802.11b/g), ZigBee, etc., as well as 2.3 GHz WiMAX, 2.5 GHz WiMAX and WiBro Easy to integrate Designed for use with
More informationTO: Digi-Key. Specifications. Drawing No. K /11. Note:In case of specification change, KYOCERA Part Number also will be changed.
Specifications Drawing No. K1101-13745-372 1/11 Issued Date. Jan,23,2014 TO: Digi-Key Note:In case of specification change, KYOCERA Part Number also will be changed. Product Name Quartz Crystal Product
More informationCyaneus GPS Co-planar Antenna Part No. A10137 giganova Product Specification
giganova Product Specification 1 Features GPS antenna designed for embedded applications Balanced antenna technology High efficiency Good resistance to de-tuning Intended for SMD mounting Supplied in tape
More informationSPECIFICATION FOR APPROVAL. 1/32W, Low Resistance Chip Resistor (Lead / Halogen free)
PAGE : 1 OF 7 1/32W, 01005 Low Resistance Chip Resistor (Lead / Halogen free) 1. Scope This specification applies 0.2mm x 0.4mm (01005) size 1/32W, fixed metal film chip resistors rectangular type for
More information100 Watt DC-DC Converters Q Series
Bengn Envronment DC-DC Converters 100 Watt Q Seres 100 Watt DC-DC Converters Q Seres Input to output solaton Sngle output: Seres 24Q...48Q1000 Double output: Seres 24Q...48Q2000 Very hgh effcency of up
More informationLocator Pin Indexing Pin. Wire Size Marking CAUTION NOTE TOOLING ASSISTANCE CENTER PRODUCT INFORMATION
ROTA-CRIMP* Crmpng Tool Instructon Sheet 408-2681 68321-1 13 APR 12 Statonary De (Nest) Anvl De Hold-Down Devce and Contact Locator Front of Tool Locator Pn Indexng Pn Wre Sze Markng The hold-down devce
More informationAFV-P 2U/4U. AC + DC Power Solutions. series. Transient Generation for Disturbance Tests. only. High Performance Programmable AC Power Source
AFV-P seres Hgh Performance Programmable AC Power Source only 2U/4U Intutve Touch Screen HMI Output Frequency up to 15-1000Hz Power Lne Smulatons: Step & Ramp Features Fast Response Tme: 300μs AC Source
More informationFrelTec GmbH. Current Sensing Chip Resistor SMD
GmbH Mathildenstr. 10A 82319 Starnberg Germany SMD 11/22/2016 1/10 Freltec GmbH www.freltec.com SPECIFICATION Part Number 018 05 * R001 * J * T05 ** E* Type Size Value Tolerance Packing Power Rating 018
More informationVI TELEFILTER Filter Specification TFS 246 H4 1/5
Filter Specification TFS 246 H4 1/5 Measurement condition Ambient temperature: 2 C Input power level: 0 dbm Terminating impedances *) Input: 490 Ω -2.62 pf Output: 490 Ω -2.62 pf External coil: 270 nh
More information(1) SHAPES AND DIMENSIONS
Ⅰ. SCOPE: This specification applies to the Pb Free high current type SMD inductors for PRODUCT INDENTIFICATION MSI - 100808 - R15 M 1 2 3 4 1 Product Code 2 Dimensions Code 3 Inductance Code 4 Tolerance
More informationYAGEO CORPORATION SMD INDUCTOR / BEADS. SLF Series. Features. Low resistance and high currents
YAGEO CORPORATION SMD INDUCTOR / BEADS SMD Power Inductors SLF Series Features Low resistance and high currents Designed for low - profile type with low Rdc and large current. The magnetic shielded type
More informationMetal Film Precision Resistor. Features
Features -Excellent overall stability -Tight tolerance down to ±0.1% -Extremely low TCR down to ±10 PPM/ C -High power rating up to 1 Watts Construction & Dimension 6 5 1 2 3 4 Applications -Telecommunication
More informationProduct Specification (KYOCERA CORPORATION CERAMIC RESONATOR SPECIFICATION)
Messrs. Digi-Key Product Specification (KYOCERA CORPORATION CERAMIC RESONATOR SPECIFICATION) RoHS compliant CONFIRMED (Please sign here and send one copy back to us.) Specification No. Type Name EQM08-5KC-G5PQ805-00
More informationMLZ1608 type. Inductors for decoupling circuits. MLZ series (for automotive) Multilayer ferrite [0603 inch]* December 2017
I N D U C T O R S December 2017 Inductors for decoupling circuits Multilayer ferrite MLZ series (for automotive) MLZ1608 1608 [0603 inch]* * Dimensions Code JIS[EIA] (2/10) REMINDERS FOR USING THESE PRODUCTS
More informationBrevis GNSS SMD Antenna Part No. A giganova Product Specification
Brevis GNSS SMD Antenna giganova Product Specification 1 Features Multi GNSS solution for embedded applications High Efficiency to size ratio Design for use with no ground beneath the antenna Near omni-directional
More information