PRODUCTS AND ACCESSORIES

Transcription

1 MODEL: GS-101 : THE GS-101 LONG RANGE PASSIVE INFRARED SENSOR (PIRS) IS AN INTRUSION DETECTOR WHICH RESPONDS TO INFRARED ENERGY RADIATED BY PEDESTRIANS OR VEHICLES WITHIN ITS FIELD OF VIEW. USEFUL RANGE OF DETECTION FOR A LONG-RANGE SENSOR IS 200 FT. (61m) FOR PEDESTRIANS. THE LONG RANGE PIRS CAN BE USED WITH THE GS SENSOR USING THE GS SENSOR PIR EXTERNAL CABLE THE LONG RANGE PIRS CAN ALSO BE USED WITH THE LCT, LCTL5 OR LCT-A USING THE 20 FT. (6m) DEC-20 CABLE OR THE 50 FT. (15.2m) DEC-50 CABLE MODEL: MS-10 : THE MS-10 MAGNETOMETER SENSOR IS A PASSIVE, DIRECTIONAL INTRUSION DETECTOR WHICH RESPONDS TO MAGNETIC STIMULI CREATED BY THE MOVEMENT OF FERROUS METAL WITHIN ITS RANGE. STATIONARY IRON OR STEEL OBJECTS WITHIN SENSING RANGE DO NOT AFFECT THE SENSOR'S ABILITY TO DETECT MOVEMENT WITHIN THE SURVEILLANCE AREA. THE MAGNETOMETER SENSOR IS USED WITH THE LCT/ LCTL5 AND LCT-A PRODUCTS.

2 MODEL: 10 WATT SOLAR POWER KIT FOR THE GS-60 PORTABLE REPEATER. : 10 WATT SOLAR PANEL, SOLAR PANEL MOUNT, BATTERY AND 6 FT. (1.8m) CABLE. UTILIZE THE CAPABILITIES OF YOU GS60 PORTABLE REPEATER AND LET OUR NATURAL SUN PROVIDE THE POWER. GREAT TO USE WHERE POWER IS LIMITED. Photo Coming Soon MODEL ID: GS-EBP : EXTERNAL BATTERY PACK IS EXCELLENT FOR ADDING UP TO 3 TIMES THE LIFE OF ANY GS SENSOR. (BATTERIES NOT INCLUDED) Photo Coming Soon MODEL ID: DISTRIBUTION BOX (USED WITH THE GS- MTS MICRO TREMOR SENSOR) : THE DISTRIBUTION BOX ALLOWS THE GS SENSORS TO COMMUNICATE WITH GS-MTS SENSORS.

3 MODEL ID: JUNCTION BOX : THREE PORT JUNCTION BOX USED TO DUPLICATE THE 12 PIN SIDE CONNECTOR ON ALL GS SENSORS. USED WHEN MULTIPLE ACCESSORIES NEED ACCESS TO THE 12 PIN CONNECTOR. Photo Coming Soon MODEL: GS-WB900 KIT (INCLUDES BATTERIES) : THE WIRELESS BRIDGE (WB) IS A SHORT RANGE (APPROX. 500 FT) LOW FREQUENCY TRANSCEIVER PAIR. THAT ENABLES YOU TO ADD SEVERAL TYPES OF CONTACT CLOSURE TRIGGERS TO YOUR GS OR LCT SENSOR SYSTEM. MULTIPLE WIRELESS TRANSMITTERS CAN BE ADDED TO A SINGLE WIRELESS RECEIVER. STANDARD CABLES ARE AVAILABLE TO CONNECT FROM THE GS SENSOR OR LCT SENSOR TO GS-WB900. Photo Coming Soon MODEL GS-WB900 (INCLUDES BATTERIES) : THE GS-WB900 IS A LOW POWER WIRELESS TRANSCEIVER THAT CAN BE SET UP AS A TRANSMITTER OR A RECEIVER VIA INTERNAL DIP-SWITCH. USING ONE OF THE STANDARD INPUT CABLES, THE GS-WB900 CAN TRANSMIT ANY TYPE OF CONTACT CLOSURE FROM EITHER A GS OR LCT SENSORS OR ANY SENSOR TRIGGER, DEPENDING ON THE APPLICATION MODEL ID: GS ON/OFF SWITCH : PORTABLE ON/OFF SWITCH FOR GS-10/GS-20/ AND GSE SENSORS. RED/GREEN LED INDICATOR TO CONFIRM IF SENSOR IS ON OR OFF.

4 MODEL ID: GROUND PLANE ANTENNA : GROUND PLANE ANTENNA ENCLOSED WITH SPIKE, W/ 6FT CABLE W. TNC MALE CONNECTOR. INCLUDES BNC WHIP CENTER AERIAL USED WITH: ALL GS SENSOR PRODUCTS & GS-60 PORTABLE REPEATER MODEL ID: BNC WHIP ANTENNA : BNC WHIP ANTENNA TO REPLACE WHIPS USED WITH THE: LCT / LCT-A SENSORS, AND ALL GS GROUND PLANE ANTENNAS MODEL ID: 3DBI GAIN ANTENNA W/25 FT. (7.6m) COAX CABLE. : 5/8 WAVE 3DBI ANTENNA W/25 FT. (7.6m) COAX CABLE. TYPE N TO BNC OR TNC. THIS ANTENNA IS USED WITH THE: GS-70 / RD105 BASE STATION MONITOR (BNC CONNECTOR), GS-60 PORTABLE REPEATER (TNC CONNECTOR).

5 MODEL ID: 3DBI GAIN ANTENNA W/100 FT. (30.5m) COAX CABLE. : 5/8 WAVE 3DBI ANTENNA W/100 FT. (30.5m) COAX CABLE. TYPE N TO BNC OR TNC.THIS ANTENNA IS USED WITH THE: GS-70 / RD105 BASE STATION MONITOR (BNC CONNECTOR), GS-60 PORTABLE REPEATER (TNC CONNECTOR) MODEL ID: GS30 LOW FREQUENCY PORTABLE ANTENNA WITH TNC CONNECTION. : RUBBERIZED VHF LOW FREQUENCY ¼ WAVE PORTABLE ANTENNA WITH TNC CONNECTION USED WITH THE GS-30 HAND HELD PROGRAMMER MODEL ID: GS30 HIGH FREQUENCY PORTABLE ANTENNA WITH TNC CONNECTION : RUBBERIZED VHF HIGH FREQUENCY ¼ WAVE PORTABLE ANTENNA WITH TNC CONNECTION. USED ON THE GS-30 HAND HELD PROGRAMMER.

6 MODEL ID: GS80 LOW FREQUENCY ANTENNA : LOW BAND RUBBERIZED BNC ANTENNA USED WITH THE GS-80 AND RD201 PORTABLE REPEATERS MODEL ID: GS80 HIGH FREQUENCY ANTENNA : HIGH BAND RUBBERIZED BNC ANTENNA USED WITH THE GS-80 / RD201 PORTABLE MONITORS.

7 MODEL ID: MAGNETIC MOUNT ANTENNA WITH BNC CONNECTOR. : MAGNETIC MOUNT ANTENNA WITH BNC CONNECTOR. USED WITH THE GS- 80 / RD201 PORTABLE MONITORS OR GS-90/ RD115 MOBILE MONITOR TNC FEMALE TO TNC MALE, 6 FT. (1.78m) ANTENNA EXTENSION CABLE FOR THE GS SENSOR GROUND PLANE ANTENNA.

8 MODEL: SPS-20 : SEISMIC PROBE WITH 20 FT. (6m) CABLE. USED WITH THE LCT SENSOR AND LCT-A PRODUCTS MODEL: SPS-21 : SEISMIC CABLE WITH PIGTAIL TO CREATE A LINE STRING OF UP TO 5, SPS-21 UNITS. CABLE LENGTH IS 20 FT (6m). THE SPS-21 IS USED WITH LCT AND LCT-A PRODUCTS.

9 MODEL: DEC-20 : DIRECTIONAL EXTENSION CABLE (DEC-20) 20 FT. (6m) LENGTH. USED WITH LCT AND LCT-A PRODUCTS WHEN A PIRS OR MS-10 IS BEING USED MODEL: DEC-50 : DIRECTIONAL EXTENSION CABLE (DEC-50) 50 FT. USED WITH LCT AND LCT-A PRODUCTS WHEN A PIRS OR MS-10 IS BEING USED

10 MODEL ID: PROGRAMMING KIT FOR A PC. : PROGRAMMING KIT INCLUDES 2 CABLES TO CONNECT TO A PC TO CONFIGURE THE GS-10/GS-20/GS-30 AND GSE SENSORS. EASY INSTALLATION MODEL ID: GS (PIR) EXTERNAL CABLE : GS SENSOR PASSIVE INFRARED (PIR) EXTERNAL CABLE, 25 (7.6m). USED WITH GS-10/ GS-20/GSE-3/GSE-13 SENSORS.

11 MODEL ID: CONTACT CLOSURE (CC) CABLE. : CONTACT CLOSURE (CC) 20 FT. (6m) CABLE. THE CC CABLE IS USED WITH ALL GS SENSORS MODEL ID: RS232 SERIAL CABLE : THE RS232 SERIAL CABLE IS USED TO CONNECT THE PRINTER PORT ON PRODUCTS TO A COMPUTER RS232 PORT. WORKS WITH GS-80 / RD201 PORTABLE REPEATERS, GS-70 / RD105 BASE STATION MONITORS, GS-90 / RD115 MOBILE MONITORS MODEL ID: PROGRAMMING CABLE. : THE PROGRAMMING CABLE, 6FT. IS USED WITH ALL GS SENSORS USING THE GS-30 HAND HELD PROGRAMMER.

12 MODEL ID: GS/BUCKEYE EXTENSION CABLE : GS/BUCKEYE EXTENSION CABLE, 20, USED TO CONNECT A GS10/GS20 TO A BUCKEYE GAME CAM MODEL ID: SOLAR PANEL 6FT EXTENSION CABLE : THE SOLAR PANEL EXTENSION CABLE, 6FT IS TO BE USED WITH THE KIT MODEL ID: STANDARD STEEL SECURITY HOUSING FOR GS-MTS (3/16 THICK) : STRONG, SECURE 11 GAUGE STEEL HOUSING TO PROTECT YOU GS-MTS SENSORS FROM WEATHER AND THEFT.

13 MODEL ID: SUPER DUTY STEEL SECURITY HOUSING FOR GS-MTS (1/4 THICK) : STRONG, SECURE 3/16 TH GAUGE STEEL HOUSING TO PROTECT YOU GS-MTS SENSORS FROM WEATHER AND THEFT, SUPER DUTY VERSION MODEL ID: GS81 CARRYING CASE : GS81 NYLON CARRYING CASE WITH STRAP. USED TO PROTECT THE GS-80 / RD201 PORTABLE REPEATERS. LIGHTWEIGHT AND DURABLE MODEL ID: GS-30 NYLON CARRYING CASE WITH STRAP. : THE GS30 NYLON CARRING CASE WITH STRAP IS USED TO PROTECT THE GS- 30 / GS-30L HAND HELD PROGRAMMERS. LIGHTWEIGHT AND DURABLE..