Lead Free. G : Green 50 : 5.0V. 13 Tape and Reel Package Packaging Part Number
|
|
|
- Oswald Wilson
- 5 years ago
- Views:
Transcription
1 AP7 Features.4V Maximum Dropout at Full Load Current Fast Transient Response Output Current Limiting Built-in Thermal Shutdown Good Noise Rejection 3-Terminal Adjustable or Fixed.5V,.8V,.5V, 3.3V, 5.V Lead Free Packages: SOT3-3L, TO5-3L, SOT89-3L, TO63-3L and TO-3L SOT3-3L, TO5-3L and SOT89-3L: Available in Green Molding Compound (No Br, Sb) Lead Free Finish/RoHS Compliant (Note ) General Description AP7 is a low dropout positive adjustable or fixed-mode regulator with A output current capability. The product is voltage specifically designed to provide well-regulated supply for low IC applications such as high-speed bus termination and low current 3.3V logic supply. AP7 is also well suited for other applications such as VGA cards. AP7 is guaranteed to have lower than.4v dropout at full load current making it ideal to provide well-regulated outputs of.5 to 5. with 6.4V to 8V input supply. AP7 is available in commercial temperature grade. Applications PC Peripheral Communication Ordering Information A P 7 X XX X - X Package Vout D : TO5-3L Blank : Adj E : SOT3-3L 5 :.5V K : TO63-3L 8 :.8V T : TO-3L 5 :.5V Y : SOT89-3L 33 : 3.3V 5 : 5.V Lead Free L : Lead Free (Note ) G : Green Packing U : Tube 3 : Tape & Reel Device Tube 3 Tape and Reel Package Packaging Code (Note 3) Quantity Quantity Suffix Suffix AP7DXXL-U D TO5-3L 8 -U NA NA AP7DXXL-3 D TO5-3L NA NA 5/Tape & Reel -3 AP7DXXG-U D TO5-3L 8 -U NA NA AP7DXXG-3 D TO5-3L NA NA 5/Tape & Reel -3 AP7EXXL-U E SOT3-3L 75 -U NA NA AP7EXXL-3 E SOT3-3L NA NA 5/Tape & Reel -3 AP7EXXG-U E SOT3-3L 75 -U NA NA AP7EXXG-3 E SOT3-3L NA NA 5/Tape & Reel -3 AP7KXXL-U K TO63-3L 5 -U NA NA AP7KXXL-3 K TO63-3L NA NA 8/Tape & Reel -3 AP7TXXL-U T TO-3L 5 -U NA NA AP7YXXL-3 Y SOT89-3L NA NA 5/Tape & Reel -3 AP7YXXG-3 Y SOT89-3L NA NA 5/Tape & Reel -3 Notes:. TO63-3L and TO-3L are available in Lead Free products only.. EU Directive /95/EC (RoHS). All applicable RoHS exemptions applied, see EU Directive /95/EC Annex Notes. 3. Pad layout as shown on Diodes Inc. suggested pad layout document AP, which can be found on our website at AP7 Rev. 4 of DECEMBER 8
2 AP7 Pin Assignments () SOT89-3L () SOT3-3L 3 VIN Adj (GND) 3 VIN Adj (GND) (3) TO-3L (4) TO5-3L and TO63-3L ( Front View ) 3 VIN Adj (GND) 3 VIN Adj (GND) Pin Descriptions NAME I/O PIN # FUNCTION Adj (GND) I V OUT O V IN I 3 A resistor divider from this pin to the V OUT pin and ground sets the output voltage (Ground only for Fixed-Mode). The output of the regulator. A minimum of uf capacitor (.5Ω ESR Ω) must be connected from this pin to ground to insure stability. The input pin of regulator. Typically a large storage capacitor (.5Ω ESR Ω) is connected from this pin to ground to insure that the input voltage does not sag below the minimum dropout voltage during the load transient response. This pin must always be.3v higher than V OUT in order for the device to regulate properly. AP7 Rev. 4 of DECEMBER 8
3 AP7 Block Diagram V IN 3 V OUT CURRENT LIMIT +.5V + GND (FIXED) Thermal Shutdown - Adj Absolute Maximum Ratings Symbol Parameter Rating Unit V IN DC Supply Voltage -.3 to 8 V T MJ Maximum Junction Temperature 5 o C P D Power Dissipation SOT89-3L SOT3-3L TO-3L TO5-3L TO63-3L Internally limited by maximum junction temperature of 5 o C (Note 4) mw T ST Storage Temperature -65 to +5 o C Notes: 4. AP7 contains an internal thermal limiting circuit that is designed to protect the regulator in the event that the maximum junction temperature exceeded. When activated, typically at 5 C, the regulator output switches off and then back on as the die cools. Recommended Operating Conditions Symbol Parameter Min Max Unit T OP Operating Junction Temperature Range -4 5 o C AP7 Rev. 4 3 of DECEMBER 8
4 Electrical Characteristics (Under Operating Conditions) AP7 Parameter Conditions Min Typ. Max Unit Reference Voltage AP7-ADJ T A = 5 o C, (V IN- OUT) =.5V I O = ma V AP7-.5 I OUT = ma, T A = 5 o C, 3V V IN V V AP7-.8 I OUT = ma, T A = 5 o C, 3.3V V IN V V Output Voltage AP7-.5 I OUT = ma, T A = 5 o C, 4V V IN V V AP7-3.3 I OUT = ma, T A = 5 o C, 4.8V V IN V V AP7-5. I OUT = ma, T A = 5 o C, 6.5V V IN V V Line Regulation AP7-XXX I O = ma,v OUT+.5V<V IN<V, T A = 5 o C. % AP7-ADJ V IN=3.3V,Vadj=,mA<Io<A, T A = 5 o C (Note 5, 6) % AP7-.5 V IN = 3V, ma<io<a, T A = 5 o C (Note 5, 6) 5 mv Load Regulation AP7-.8 V IN = 3.3V, ma<io<a, T A = 5 o C (Note 5, 6) 5 8 mv AP7-.5 V IN = 4V, ma<io<a, T A = 5 o C (Note 5, 6) 5 mv AP7-3.3 V IN = 5V, I OUT A, T A = 5 o C (Note 5, 6) 6 33 mv AP7-5. V IN = 8V, I OUT A, T A = 5 o C (Note 5, 6) 4 5 mv Dropout Voltage AP7-ADJ/.5/.8 (V IN-V OUT) /.5/3.3/5. I OUT = A, ΔV OUT = %V OUT.3.4 V Current Limit AP7-ADJ/.5/.8 /.5/3.3/5. (V IN-V OUT) = 5V. A Minimum Load Current (Note 7) AP7-XXX o C T J 5 o C 5 ma Thermal Regulation T A = 5 o C, 3ms pulse.8.4 %/W Ripple Rejection F = 8Hz, C OUT = 5uF Tantalum, I OUT = A AP7-XXX V IN = V OUT+3V 6 7 db Temperature Stability I O = ma.5 % SOT89-3L: Control Circuitry/Power Transistor (Note 8) 8 SOT3-3L: Control Circuitry/Power Transistor (Note 9) 7 θ JA Thermal Resistance TO5-3L: Control Circuitry/Power Transistor (Note 8) 73 o C/W Junction-to-Ambient TO-3L: Control Circuitry/Power Transistor (Note 8) TO63-3L: Control Circuitry/Power Transistor (Note 8) 78 6 θ JC Thermal Resistance Junction-to-Case Notes: SOT89-3L: Control Circuitry/Power Transistor (Note 8) SOT3-3L: Control Circuitry/Power Transistor (Note 9) TO5-3L: Control Circuitry/Power Transistor (Note 8) TO-3L: Control Circuitry/Power Transistor (Note 8) TO63-3L: Control Circuitry/Power Transistor (Note 8) 5. See thermal regulation specifications for changes in output voltage due to heating effects. Line and load regulation are measured at a constant junction temperature by low duty cycle pulse testing. Load regulation is measured at the output lead = /8 from the package. 6. Line and load regulation are guaranteed up to the maximum power dissipation of 5W. Power dissipation is determined by the difference between input and output differential and the output current. Guaranteed maximum power dissipation will not be available over the full input/output range. 7. Quiescent current is defined as the minimum output current required in maintaining regulation. At V input/output differential the device is guaranteed to regulate if the output current is greater than ma. 8. Test conditions for SOT89-3L, TO-3L, TO5-3L and TO63-3L: Devices mounted on FR-4 substrate, single sided PC board, oz copper, with minimum recommended pad layout, no air flow. 9. Test conditions for SOT3-3L: Devices mounted on FR-4 substrate, single sided PC board, oz copper, with 5mmx5mm thermal pad layout, no air flow o C/W AP7 Rev. 4 4 of DECEMBER 8
5 Typical Performance Characteristics AP Dropout Voltage (V) Tj = 5 o C Tj = 5 o C Output Voltage Deviation (%) I load=8ma Output Current (ma) Dropout Voltage vs Output Current Temperature ( o C) Load Regulation vs Temperature Output Voltage Change (%) Temperature ( o C) Percent Change in Output Voltage vs Temperature Output Voltage Deviation (%) Input Voltage (V) Line Regulation Output Voltage Deviation (mv) Input Voltage (V) 7.5 Cin=uF 6.5 Cout=uF Tantalum TIME (us) Line Transient Response Load Current (A) Output Voltage Deviation (mv) C in = uf C out = uf Tantalum Preload = ma TIME (us) Load Transient Response AP7 Rev. 4 5 of DECEMBER 8
6 AP7 Typical Application Circuit 5V C uf 5V C uf VIN VIN GND C uf 3.3V/A Adj R Ω R Ω V o C uf.5v/a ( 5V/3.3V fixed output ) ( 5V/.5V ADJ output ) Note: Vo = VREF (+ R R ) Marking Information () SOT3-3L Logo 7 for ADJ 7-VV:5 for.5v 8 for.8v 5 for.5v 33 for 3.3V 5 for 5.V 7-VV Y W X Y : Year : ~9 W : Week : a~z : ~6 week; A~Z : 7~5 week; Z repersents 5 and 53 week X : Internal code a~z : Lead Free A~Z : Green () TO5-3L Logo 7 for ADJ 7-VV:5 for.5v 8 for.8v 5 for.5v 33 for 3.3V 5 for 5.V 7-VV YY WW X X L : Lead Free G : Green YY : Year : ~9 WW : Week : ~5, 5 represents 5 and 53 week X : Internal Code AP7 Rev. 4 6 of DECEMBER 8
7 AP7 Marking Information (Continued) (3) SOT89-3L X X Y W X 3 XX : Identification code Y : Year : ~9 W : Week : a~z : ~6 week; A~Z : 7~5 week; Z represents 5 and 53 week X : Internal code a~z : Lead Free A~Z : Green Marking Code Table Identification Code DA DB DC DD DE DF Output Version AP7-ADJ AP7-.5V AP7-.8V AP7-.5V AP7-3.3V AP7-5.V (4) TO63-3L Logo VV: 5 for.5v 8 for.8v 5 for.5v 33 for 3.3V 5 for 5.V Blank for ADJ 7-VV YY WW X X L : Lead Free YY : Year : ~9 WW : Week : ~5, 5 represents 5 and 53 week X : Internal code AP7 Rev. 4 7 of DECEMBER 8
8 AP7 Marking Information (Continued) (5) TO-3L Logo 7 for ADJ 7-VV : 5 for.5v 8 for.8v 5 for.5v 33 for 3.3V 5 for 5.V 7 - VV YY WW X X L : Lead Free YY : Year : ~9 WW : Week : ~5, 5 represents 5 and 53 week X : Internal code Package Information (All Dimensions in mm) () Package Type: SOT3-3L AP7 Rev. 4 8 of DECEMBER 8
9 Package Information (Continued) AP7 () Package Type: TO5-3L 6.354/6.8 Typ /5.5 Typ / /6. Typ Typ.8 BSC BSC..64/. Typ.83.89/.4. Land Pattern Recommendation (Unit: mm) 9./.4 Typ 9.7.8/.4 Typ.9.45/.58 Typ.5.5 SEE NOTE SEATING PLANE.45/.58 Typ.5 (3) Package Type: SOT89-3L.4/.75 Typ.6.7.8/..35/.6 Typ / (x).9/3. Typ /4.6 Typ Land Pattern Recommendation (Unit: mm) 5 (x).4/.6 Typ /.55 Typ.5.36/.48.4/.53 Typ.4 Typ.47.36/.48 Typ.4.35/.43 Typ.39 AP7 Rev. 4 9 of DECEMBER 8
10 Package Information (Continued) AP7 (4) Package Type: TO63-3L 9.65/.9 Typ Typ /9.65 Typ /5.88 Typ BSC..7/.78 Typ.5.5/.99 Typ.75.4/.4 Typ /4.83 Typ Land Pattern Recommendation (Unit: mm).38 Typ.54.8/.8 Typ.54.4/.4 Typ.7 (5) Package Type: TO-3L.54/3.43 Typ /.7 Typ. Ø3.53/4.9 Typ /4.85 Typ 4..5/.4 Typ.95 4./6.5 Typ /6.35 Typ /6.86 Typ 6.35 SEATING PLANE.4/.78 Typ.46.7/4.7 Typ /5.33 Typ 5.8.5/.4 Typ.83.99/.79 Typ.54.3/.4 Typ. 7.3/.9 Typ.48 AP7 Rev. 4 of DECEMBER 8
11 AP7 IMPORTANT NOTICE Diodes Incorporated and its subsidiaries reserve the right to make modifications, enhancements, improvements, corrections or other changes without further notice to any product herein. Diodes Incorporated does not assume any liability arising out of the application or use of any product described herein; neither does it convey any license under its patent rights, nor the rights of others. The user of products in such applications shall assume all risks of such use and will agree to hold Diodes Incorporated and all the companies whose products are represented on our website, harmless against all damages. LIFE SUPPORT Diodes Incorporated products are not authorized for use as critical components in life support devices or systems without the expressed written approval of the President of Diodes Incorporated. AP7 Rev. 4 of DECEMBER 8
AP1117. General Description. Features. Applications. Typical Application Circuit. Note: R 1A LOW DROPOUT POSITIVE ADJUSTABLE OR FIXED-MODE REGULATOR
AP7 Features General Description.4V Maximum Dropout at Full Load Current Fast Transient Response Output Current Limiting Built-in Thermal Shutdown Good Noise Rejection 3-Terminal Adjustable or Fixed.5V,.8V,.5V,
AP1117 1A LOW DROPOUT POSITIVE ADJUSTABLE OR FIXED-MODE REGULATOR. Pin Assignments. Description. Features. Applications SOT89-3L.
Description is a low dropout positive adjustable or fixed-mode regulator with A output current capability. The product is voltage specifically designed to provide well-regulated supply for low IC applications
AP1122 1A LOW DROPOUT POSITIVE REGULATOR. Description. Pin Assignments. Applications. Features V IN V OUT GND. Tab is V OUT GND 3 V IN 2 GND
Description Pin Assignments is a low dropout positive fixed-mode regulator with A output current capability. The product is specifically designed to provide well-regulated supply for low voltage IC applications
A P X X X. Lead Free L : Lead Free G : Green (Note 1)
Lead-free AP Features General Description.3V maximum dropout at full load current Fixed.V±% output voltage Fast transient response Output current limiting Built-in thermal shutdown Good noise rejection
Description 3.3V/1A. Note: V = V
Features Advanced Power Maximum dropout of.5v at full load current Fast transient response Output current limiting Built-in thermal shutdown Available packages: SOT3, TO5, SOT89 Good noise rejection Stable
Not Recommended for New Design
Features.4V maximum dropout at full load current Fast transient response Output current limiting Built-in thermal shutdown Packages: TO22-5, TO252-5, TO263-5, SOP8 Good noise rejection Fixed Output.5V,.8V,
5A Low Dropout Positive Adjustable or Fixed-Mode Regulator AP1084 X X X X. Blank : Adj 15 = 1.5V 18 = 1.8V 25 = 2.5V 33 = 3.3V 50 = 5.0V.
Features.4V maximum dropout at full load current Built-in thermal shutdown Output current limiting Adjustable output voltage or fixed.5v,.8v,.5v, 3.3V, 5.V Fast transient response Good noise rejection
Lead Free L : Lead Free (Note 1) G : Green (Note 2) Part Number
5V OUTPUT 3-TERMINAL POSITIVE REGULATOR Features General Description 5.0V output voltage with tolerances of ±5% over the operating temperature ranges Output current in excess of 100mA Internal thermal
ZLDO1117 1A LOW DROPOUT POSITIVE REGULATOR 1.2V, 1.5V, 1.8V, 2.5V, 3.3V, 5.0V and ADJUSTABLE OUTPUTS
1A LOW DROPOUT POSITIE REGULATOR 1.2, 1.5, 1.8, 2.5, 3.3, 5. and ADJUSTABLE OUTPUTS Description is a low dropout positive adjustable or fixedmode regulator with 1A output current capability. The has a
AP78L05/08/12 AP78LXX SERIES 3-TERMINAL POSITIVE REGULATORS. Description. Pin Assignments. Features. Applications. (Bottom View) TO92.
Description The AP78LXX Series is a three terminal positive regulator available with fixed output voltages from 5V, 8V and 12V, making them useful in a wide range of applications. When used as a Zener
ZLDO1117. Description. Pin Assignments. Features. Typical Applications Circuit ZLDO V 1.8V MLCC MLCC. A Product Line of. Diodes Incorporated
1A LOW DROPOUT POSITIVE REGULATOR 1.2V, 1.5V, 1.8V, 2.5V, 3.3V, 5.V AND ADJUSTABLE OUTPUTS Description Pin Assignments is a low dropout positive adjustable or fixed-mode regulator with 1A output current
Package K5 : TO263-5L T5 : TO220-5L T5R : TO220-5L(R)
Features General Description oltage: 3.3, 5, 12 and Adjustable ersion Adjustable ersion oltage Range, 1.23 to 18+4% 150KHz +15% Fixed Switching Frequency oltage Mode Non-Synchronous PWM Control Thermal-Shutdown
AP1506. Package T5: TO220-5L L : K5: TO263-5L T5R: TO220-5L(R)
Features General Description oltage: 3.3, 5, 12 and Adjustable ersion Adjustable ersion oltage Range, 1.23 to 18+4% 150KHz +15% Fixed Switching Frequency oltage Mode Non-Synchronous PWM Control Thermal-Shutdown
Lead Free L : Lead Free. Package K5 : TO263-5L T5 : TO220-5L T5R : TO220-5L(R)
Features General Description Output voltage: 3.3, 5, 12 and adjustable output version Adjustable version output voltage range, 1.23 to 37+4% 150KHZ +15% fixed switching frequency oltage mode non-synchronous
1. EU Directive 2002/95/EC (RoHS). All applicable RoHS exemptions applied. Please visit our website at
Description The is a 1A, adjustable and fixed output voltage, ultra-low dropout linear regulator with enable. The device includes pass element, error amplifier, band-gap reference, current limit and thermal
Applications AP7350 GND
150mA ULTRA-LOW QUIESCENT CURRENT LDO with ENABLE Description The is a low dropout regulator with high output voltage accuracy. The includes a voltage reference, error amplifier, current limit circuit
APX 8 XX - XX XX G - 7. Package Packaging SA : SOT23
Features Precision Monitoring of +2.5V, +3V, +3.3V, and +5V Power-Supply Voltages Fully Specified Over Temperature Available in three Output Configurations Push-Pull Active Low (APX809) Push-Pull Active
AP8802. General Description. Features. Applications. Typical Application Circuit. 1A LED Step-down Converter. Figure 2: Typical Application Circuit
Features General Description LED driving current up to A High efficiency up to 9% Operating input voltage up to 4V High switching frequency up to 500kHz PWM/DC input for dimming control Built-in output
AP 3152 F G - 7. Green G : Green. 7 Tape and Reel Device Package Code (Note 2) AP3152FG-7 F DFN /Tape & Reel -7.
Features General Description Up to 88% Max power efficiency Wide input voltage range: 2.7V ~ 5.5V 1x, 1.5x, and 2x charge-pump modes Drive up to 4 white LEDs Default maximum current setting: 20mA each
AP1513 X X X. Lead-Free L : Lead-Free G : Green
Features Input voltage: 3.6V to 18V Output voltage: 0.8V to V CC Duty ratio: 0% to 100% PWM control Oscillation frequency: 300KHz typ. Softstart, Current limit, Enable function Thermal Shutdown function
Battery-powered Equipment Laptop, Palmtops, Notebook Computers Portable Information Appliances SOT25 (WR Package)
WIDE INPUT VOLTAGE RANGE, 150mA ULDO REGULATOR Description Pin Assignments The series is a positive voltage regulator IC. (Top View) The has features of wide input voltage range, high accuracy, low dropout
AP7384. Description. Pin Assignments. Features NEW PRODUCT. Applications. Typical Applications Circuit. WIDE INPUT VOLTAGE RANGE, 50mA ULDO REGULATOR
WIDE INPUT VOLTAGE RANGE, 50mA ULDO REGULATOR Description Pin Assignments The series is a positive voltage regulator IC. (Top View) The has features of wide input voltage range, high accuracy, low dropout
APE1117. Advanced Power Electronics Corp.
APE7.V/A Low Dropout Fixed-Mode Regulator Features -.4V maximum dropout at full load current - Fast transient response - Output current limiting - Built-in thermal shutdown - Needs Only uf apacitor for
AP5727. General Description. Features. Applications. Typical Application Circuit. Bias Power Supply For OLED Sub Display and TFT-LCD V OUT.
Features General Description 30V High Output Voltage Fast 1.2MHz Switching Frequency Current limit and UVLO Protections Internal Thermal Shutdown Maximum 1µA Shutdown Current Integrated Soft-start Function
AP1506. Description. Pin Assignments. Features. Applications. 150kHz, 3A PWM BUCK DC/DC CONVERTER AP SD 4 FB 3 GND 2 Output
150kHz, 3A PWM BUCK DC/DC CONVERTER Description The series are monolithic IC designed for a step-down DC/DC converter, and own the ability of driving a 3A load without external transistor. Due to reducing
Features. Applications
5A LOW DROPOUT LINEAR REGULATOR Description Features The is a series of low dropout positive voltage regulators with a maximum dropout of.5v at 5A of load current. The series features on-chip thermal limiting
AP7217 AP mA CMOS LDO. Pin Assignments. Description. Applications. Features. Typical Application Circuit. ( Top View ) AP7217 SOP-8L U1 2
Description Pin Assignments The low-dropout linear regulator operates from a 3.3V to 5.5V supply and delivers a guaranteed 500mA (min) continuous load current. The high-accuracy output voltage is preset
AP7217A. General Description. Features. Applications. Typical Application Circuit AP7217A. 3.3V 600mA CMOS LDO U1 V OUT 2 VR OUT V IN VD OUT GND 7
Features General Description Very Low Dropout Voltage Low Current Consumption: Typ. 50µA Output Voltage: 3.3V Guaranteed 600mA (min) Output Input Range up to 5.5V Current Limiting Stability with Low ESR
AZ1085C. Features. Description. Applications. Pin Assignments. A Product Line of. Diodes Incorporated 3A LOW DROPOUT LINEAR REGULATOR AZ1085C INPUT
A LOW DROPOUT LINEAR REGULATOR Description Features The is a series of low dropout positive voltage regulators with a maximum dropout of.5v at A of load current. The series features on-chip thermal shutdown.
Package Packaging. Lead Free G : Green
Features General Description Input voltage: 4.4 to 18 Output voltage: 0.8 to CC. Duty ratio: 0% to 99% PWM control Oscillation frequency: 300KHz typ. Current limit, Enable function Thermal Shutdown function
AZ1117I. Description. Pin Assignments NEW PRODUCT. Features Applications LOW DROPOUT LINEAR REGULATOR WITH INDUSTRIAL TEMPERATURE RANGE AZ1117I
LOW DROPOUT LINEAR REGULATOR WITH INDUSTRIAL TEMPERATURE RANGE Description Pin Assignments The is available in industrial temperature range low dropout three-terminal regulator. (Top View) The is optimized
TL 072 S G Green G : Green. TL072SG-13 S SOP-8L 2500/Tape & Reel -13
Features General Description Low Power Consumption Wide Common-Mode and Differential Voltage Ranges Low Input Bias and Offset Currents Output Short-Circuit Protection Low Total Harmonic Distortion 0.003%
APX358/APX324 LOW VOLTAGE, RAIL-TO-RAIL INPUT AND OUTPUT DUAL/QUAD OPERATIONAL AMPLIFIERS
Features General Description (For V + =5V and V - =0V typical unless otherwise noted) Guaranteed 2.7V and 5V performance Crossover distortion eliminated Operating temperature range (-40 C to +85 C) Gain-bandwidth
AP mA, LOW QUIESCENT CURRENT, FAST TRANSIENT LOW DROPOUT LINEAR REGULATOR. Description. Pin Assignments. Features.
Description The is a 300mA, adjustable and fixed output voltage, low dropout linear regulator. The device included pass element, error amplifier, band-gap, current limit and thermal shutdown circuitry.
Description. Q1 2 B240 Ipk Rsc V Ref Reg
Features Description Operation from.0v to 0V Input Low Standby Current Current Limiting Output Current to.a Output Voltage Adjustable Frequency Operation to 00 khz Precision % Reference Lead Free packages:
Advanced Power Electronics Corp. APE8840 FEATURES APPLICATION TYPICAL APPLICATION PACKAGE ORDERING INFORMATION
FEATURES FIXED DUAL 600mA LOW DROPOUT POSITIVE REGULATOR.5V Maximum Dropout at Full Load Current Built-in Thermal Shutdown for Each Channel Output Current Limiting for Each Channel Fast Transient Response
AZ2940. Description. Features. Applications. Pin Assignments. A Product Line of. Diodes Incorporated 1A ULTRA LOW DROPOUT LINEAR REGULATOR AZ2940
1A ULTRA LOW DROPOUT LINEAR REGULATOR Description The is a low dropout three-terminal regulator with a typical dropout of 280mV at 1A output current. The provides current limit and thermal shutdown. On-chip
AP8802. General Description. Features. Applications. Typical Application Circuit. 1A LED Step-down Converter. Figure 1: Typical Application Circuit
Features General Description LED driving current up to A High efficiency up to 92% Operating input voltage up to 48V High switching frequency up to 500kHz PWM/DC input for dimming control Built-in output
AP5004 PWM CONTROL 2.5A STEP-DOWN CONVERTER. Description. Pin Assignments. Applications. Features AP5004 SOP-8L. (Top View ) EN FB Vboost Output
Description Pin Assignments The is a step-down switching regulator with PWM control and includes a reference voltage source, oscillation circuit, error amplifier, and an internal NMOS. (Top View ) provides
AP XX XXX X - X. G: Green. Lead Free/ Green. Quantity
Features Output voltage: 3.3, 5, 12 and adjustable output version Adjustable version output voltage range, 1.23 to 37+4% 150kHz +15% fixed switching frequency oltage mode non-synchronous PWM control Thermal-shutdown
AL5816Q. Description. Pin Assignments. Applications. Features VCC PWM GND AUTOMOTIVE COMPLIANT 60V LINEAR LED CONTROLLER AL5816Q
AUTOMOTIVE COMPLIANT 60V LINEAR LED CONTROLLER Description Pin Assignments The is a 5-terminal adjustable constant current linear LED controller offering excellent temperature stability and current (Top
RC A Adjustable/Fixed Low Dropout Linear Regulator. Description. Features. Applications. Typical Applications.
www.fairchildsemi.com A Adjustable/Fixed Low Dropout Linear Regulator Features Low dropout voltage Load regulation:.5% typical Trimmed current limit On-chip thermal limiting Standard SOT-223, TO-263, and
AP8802 1A LED STEP-DOWN CONVERTER. Pin Assignments. Description. Applications. Features. Typical Application Circuit AP8802
Description The is a step-down DC/DC converter designed to drive LEDs with a constant current. The device can drive up to thirteen LEDs, depending on the forward voltage of the LEDs, in series from a voltage
AP mA, LOW QUIESCENT CURRENT, FAST TRANSIENT LOW DROPOUT LINEAR REGULATOR. Description. Pin Assignments NEW PRODUCT. Applications.
LOW DROP LINEAR REGULATOR Description Pin Assignments The is a 3mA, adjustable and fixed output voltage, low dropout linear regulator. The device included pass element, error amplifier, band-gap, current
Advanced Power Electronics Corp.
300mA Low Drop-out Linear Regulator Features Low Dropout Voltage of 250mV at 300mA Guaranteed 300mA Output Current Very Low Quiescent Current of about 30µA Output Voltage Accuracy of ±2% for 1.5V~3.6V
AH287. General Description. Features. Typical Application Circuit HIGH VOLTAGE HALL-EFFECT SMART FAN MOTOR CONTROLLER. 24V Brush-Less DC Fan
Features General Description On Chip Hall Sensor Rotor-Locked Shutdown Automatically Restart Built-in Zener Protection for Output Driver Operating Voltage: 3.8V~28V Output Current: I O(AVE) = 400mA Lead
AP mA LOW DROPOUT REGULATOR WITH POK. Description. Pin Assignments. (Top View) U-DFN (Top View) Features SO-8EP.
600mA LOW DROP REGULATOR WITH POK Description The is a 600mA, adjustable output voltage, ultra-low dropout linear regulator. The device includes pass element, error amplifier, band-gap reference, current
74LVCE1G00 SINGLE 2 INPUT POSITIVE NAND GATE. Description. Pin Assignments NEW PRODUCT. Features. Applications
Description Pin Assignments The is a single 2-input positive NAND gate with a standard totem pole output. The device is designed for operation with a power supply range of 1.4V to 5.5V. The inputs are
Lead-Free. Suffix 3000/Tape & Reel 3000/Tape & Reel 3000/Tape & Reel 3000/Tape & Reel 3000/Tape & Reel AP432(A) SOP-8L NA NA -7 NA NA NA NA
Lead-free Lead-free Lead-free AP432/AP432A Features Precision reference voltage AP432 : 1.24V ± 1% AP432A : 1.24V ± 0.5% Sink current capability: 200mA Minimum cathode current for regulation: 150μA Equivalent
ZXCT1009Q. Pin Assignments. Description. Features. Applications. Typical Application Circuit. A Product Line of. Diodes Incorporated
AUTOMOTIVE GRADE MICROPOWER CURRENT MONITOR Description The is a micropower high side current sense monitor. This device eliminates the need to disrupt the ground plane when sensing a load current. Pin
300mA, LOW QUIESCENT CURRENT, FAST TRANSIENT LOW DROPOUT LINEAR REGULATOR Description. Applications
300mA, LOW QUIESCENT CURRENT, FAST TRANSIENT LOW DROPOUT LINEAR REGULATOR Description Pin Assignments The is a 300mA, 5.0V fixed output voltage, low-dropout linear regulator with ±1% output voltage accuracy.
SINGLE PHASE HALL EFFECT LATCH SMART FAN MOTOR CONTROLLER
Description Pin Assignments The is a single chip solution for driving single-coil brushless direct current (BLDC) fans and motors. The integrated full-bridge driver output stage uses soft switching to
AP2132. Description. Pin Assignments. Features. Applications. A Product Line of. Diodes Incorporated 2A CMOS LDO REGULATOR AP2132.
2A CMOS LDO REGULATOR Description Pin Assignments The series are positive voltage regulator ICs fabricated by CMOS process. The ICs consist of a voltage reference, an error amplifier, a power transistor,
74LVCE1G126 SINGLE BUFFER GATE WITH 3-STATE OUTPUT. Pin Assignments. Description NEW PRODUCT. Features. Applications
Description Pin Assignments The is a single non-inverting buffer/bus driver with a 3-state output. The output enters a high impedance state when a LOW-level is applied to the output enable (OE) pin. The
AP432/AP432A. General Description. Features. Typical Application Circuit ADJUSTABLE PRECISION SHUNT REGULATOR V IN V OUT. C out.
Features General Description Precision reference voltage AP432 : 1.24V ± 1% AP432A : 1.24V ± 0.5% Sink current capability: 200mA Minimum cathode current for regulation: 150μA Equivalent full-range temp
AN431. Pin Assignments. Description. Features. Applications. Typical Applications Circuit. A Product Line of. Diodes Incorporated
ADJUSTABLE PRECISION SHUNT REGULATORS Description The series ICs are three-terminal adjustable shunt regulators with guaranteed thermal stability over a full operation range. These ICs feature sharp turn-on
AP2138/2139. Features. Description ADVANCED INFORMATION. Applications. Pin Assignments ULTRA LOW QUIESCENT CURRENT CMOS LDO AP2138/2139 GND V OUT V IN
ULTRA LOW QUIESCENT CURRENT CMOS LDO Description The series are CMOS-based positive voltage regulator ICs. Each of these ICs consists of a voltage reference, an error amplifier, a resistor network for
AL5811. Description. Pin Assignments. Features. Applications. Typical Applications Circuit. (Top View) V CC LED GND R SET 3 U-DFN
6V, LINEAR 75mA ADJUSTABLE CURRENT LED DRIVER Description Pin Assignments The is a Linear LED driver with an adjustable LED current up to 75mA offering excellent temperature stability and output handling
AP A SINGLE CHANNEL CURRENT-LIMITED LOAD SWITCH. Pin Assignments. Description NEW PRODUCT. Features. Applications. Typical Application Circuit
Description Pin Assignments The is single channel current-limited integrated highside power switches optimized for hot-swap applications. The devices have fast short-circuit response time for improved
AP mA, Low Quiescent Current, Fast Transient Low Dropout Linear Regulator. Description. Pin Assignments NEW PRODUCT. Features.
Description Pin Assignments The is a 600mA, adjustable and fixed output voltage, low dropout linear regulator. The device included pass element, error amplifier, band-gap, current limit and thermal shutdown
Features. Applications
WIDE INPUT VOLTAGE RANGE, 150mA ULDO REGULATOR Description The series is a positive voltage regulator IC fabricated by high voltage EPNP process. The has features of wide input voltage range, high accuracy,
Lead Free. (Note 2) Note: 1. RoHS revision Glass and High Temperature Solder Exemptions Applied, see EU Directive Annex Notes 5 and 7.
Features General Description Dual PWM control circuitry Operating voltage can be up to 50V Adjustable Dead Time Control (DTC) Under Voltage Lockout (UVLO) protection Short Circuit Protection (SCP) Variable
FAN A Adjustable/Fixed Ultra Low Dropout Linear Regulator. Description. Features. Applications. Typical Applications.
www.fairchildsemi.com 5A Adjustable/Fixed Ultra Low Dropout Linear Regulator Features Ultra Low dropout voltage,.4v typical at 5A 1.2V Versions available for GTL termination Remote sense operation Fast
AP431i. Description. Features NEW PRODUCT. Applications. Pin Assignments. A Product Line of. Diodes Incorporated
Description The is a 3-terminal adjustable shunt regulator with guaranteed thermal stability over a full operation range. It features sharp turn-on characteristics, low temperature coefficient and low
NOT RECOMMENDED FOR NEW DESIGN - USE AP7361C GND ADJ/NC. Applications
NOT RECOMMENDED FOR NEW DESIGN - USE C 1A LOW DROPOUT ADJUSTABLE AND FIXED-MODE REGULATOR WITH ENABLE Description Pin Assignments The is a 1A, adjustable and fixed output voltage, ultra-low dropout linear
AS431H. Description. Pin Assignments NEW PRODUCT. Features. Applications ADJUSTABLE PRECISION SHUNT REGULATORS AS431H ANODE CATHODE ANODE CATHODE REF
ADJUSTABLE PRECISION SHUNT REGULATORS Description Pin Assignments The is a three-terminal adjustable shunt regulator with guaranteed thermal stability over a full operation range. It features sharp turn-on
AS393/393A. Description. Pin Assignments. Features. Applications. Typical Applications Circuit LOW POWER LOW OFFSET VOLTAGE DUAL COMPARATORS
LOW POWER LOW OFFSET VOLTAGE DUAL COMPARATORS Description Pin Assignments The consist of two independent precision voltage comparators with a typical offset voltage of 1.0mV and high gain. They are specifically
500mA CMOS Ultra Low Dropout Linear Regulator
500mA CMOS Ultra Low Dropout Linear Regulator Description The series are 500mA CMOS ultra low dropout positive voltage regulators which operate from 2.4V to 5.5V input supply. The ultra low dropout linear
AMS A Adjustable/Fixed Low Dropout Linear Regulator. General Description. Key Features. Applications. Typical Application
General Description The -ADJ and -1.2,-1.5,-1.8,-2.5,-2.85, -3.3 and-5 are low dropout three-terminal regulators with 1A output current capability. These devices have been optimized for low voltage where
IN1 GND IN0. Applications
Description Pin Assignments The is a single 3-input positive configurable multiple function gate with a standard push-pull output. The output state is determined by eight patterns of 3-bit input. The user
V IN GND. Applications
150mA RF ULDO REGULATOR Description Pin Assignments The is a 150mA ULDO regulator which provides very low noise, ultra low dropout voltage (typically 165 at 150mA), very low (Top View) (Top View) standby
VIN1 VIN1 EN1 VBIAS EN2 VIN2 VIN2. Applications
5V DUAL CHANNEL PROGRAMMABLE LOAD SWITCH Description Pin Assignments is an integrated dual N-channel load switch which features an adjustable slew rate that can be set using an external capacitor independently
AP7363. Pin Assignments. Description. Features. Applications 1.5A LOW QUIESCENT CURRENT, FAST TRANSIENT ULTRA-LOW DROPOUT LINEAR REGULATOR AP7363
.5A LOW QUIESCENT CURRENT, FAST TRANSIENT ULTRA-LOW DROP LEAR REGULATOR Description The is a.5a adjustable-output voltage linear regulator with ultra-low dropout. The device includes pass element, error
FAN1117A. 1A Adjustable/Fixed Low Dropout Linear Regulator. Description. Features. Applications. Typical Applications.
www.fairchildsemi.com A Adjustable/Fixed Low Dropout Linear Regulator Features Low dropout voltage Load regulation:.5% typical Trimmed current limit On-chip thermal limiting Standard SOT-223, TO-22, and
3A High Current, Low Dropout Voltage Regulator
SPX29300/01/02/03 3A High Current, Low Dropout Voltage Regulator Adjustable & Fixed Output, Fast Response Time FEATURES Adjustable Output Down To 1.25V 1% Output Accuracy Output Current of 3A Low Dropout
Features. Applications
Description LOW CATHODE CUREENT ADJUSTABLE PRECISION SHUNT REGULATOR Features The is a three-terminal adjustable shunt regulator with guaranteed thermal stability over a full operation range. It features
AP7341. Description. Pin Assignments ADVANCED INFORMATION. Features. Applications. Typical Applications Circuit V IN V OUT AP7341 GND
3mA HIGH PSRR LOW NOISE LDO WITH ENABLE Description Pin Assignments The is a low dropout regulator with high output voltage accuracy, low R DSON, high PSRR, low output noise and low quiescent current.
LA A Low Dropout Positive Regulators. AGeneral Description. Features. Applications. LA1117 Rev of /04/08.
AGeneral Description The LA1117 is a low dropout three terminal regulator that features a low quiescent current, low input, output and dropout voltages, as well as over temperature shutdown. The output
AP2301/AP A SINGLE CHANNEL CURRENT-LIMITED POWER SWITCH. Description. Pin Assignments NEW PRODUCT. Features. ( Top View ) DFN3030E-8
Description Pin Assignments The AP2301 and AP2311 are single channel current-limited integrated high-side power switches optimized for Universal Serial Bus (USB) and other hot-swap applications. The family
Advanced Power Electronics Corp. APE1707M-HF-3TB. 150kHz, 2A PWM Buck DC/DC Converter
0kHz, A PWM Buck DC/DC Converter Features Output voltage: Fixed.V, V, V and adjustable output (.V to.v) versions. Fixed switching frequency, 0KHz ±%. Voltage mode non-synchronous PWM control. Thermal-shutdown
NOT RECOMMENDED FOR NEW DESIGN - NO ALTERNATE PART. Applications
3A ULTRA LOW DROPOUT LINEAR REGULATOR WITH ENABLE Description Pin Assignments The is a 3.0A ultra low-dropout (LDO) linear regulator that features an enable input and a power-good output. GND 1 (Top View)
ZTL431/ZTL432. Pin Assignments. Description. Features. Applications COST EFFECTIVE ADJUSTABLE PRECISION SHUNT REGULATOR ZTL431/ZTL432
COST EFFECTIVE ADJUSTABLE PRECISION SHUNT REGULATOR Description The ZTL431 and ZTL432 are three terminal adjustable shunt regulators offering excellent temperature stability and output current handling
800mA Low Dropout Voltage Regulator
800mA Low Dropout Voltage Regulator Product Description The series of adjustable and fixed voltage regulators are designed to provide 800mA output current and to operate down to 1V input-to-output differential.
AMS1117 DESCRIPTION FEATURES APPLICATIONS TYPICAL ELECTRICAL CHARACTERISTIC TYPICAL APPLICATION. 1A Bipolar Linear Regulator
DESCRIPTION AMS1117 is a series of low dropout three -terminal regulators with a dropout of 1.3V at 1A load current. AMS 1117 features a very low standby current 2mA compared to 5mA of competitor. Other
ZXRE160. Description. Pin Assignments NEW PRODUCT. Features. Applications. A Product Line of. Diodes Incorporated
0.6V ENHANCED ADJUSTABLE PRECISION SHUNT REGULATOR Description The is a 5-terminal adjustable shunt regulator offering excellent temperature stability and output handling capability. This device offers
500mA LOW NOISE LDO REGULATOR General Description. Features. Applications
General Description The is a 500mA output current fixed voltage regulator which provides low noise, very low dropout voltage (typically 350mV at 500mA), very low standby current ( maximum) and excellent
PAM2301. Description. Pin Assignments NEW PRODUCT. Applications. Features. 800mA STEP-DOWN DC-DC CONVERTER TSOT25 PAM2301
800mA STEP-DOWN DC-DC CONVERTER Description Pin Assignments The is a step-down current-mode, DC-DC converter. At heavy load, the constant frequency PWM control performs excellent stability and transient
UNISONIC TECHNOLOGIES CO., LTD
UNISONIC TECHNOLOGIES CO., LTD 1.5A ADJUSTABLE/FIXED LOW DROPOUT LINEAR REGULATOR DESCRIPTION The UTC UZ186 and UZ186-1.2V, 1.8V, 2.5V, 2.85V, 3.3V and 5V are low dropout three-terminal regulators with
GND GND VIN VOUT. Applications
300mA HIGH SPEED, EXTREMELY LOW NOISE CMOS LDO REGULATOR Description The Series are positive voltage regulator ICs fabricated by CMOS process. Pin Assignments (Top View) (Top View) The Series have features
Low Noise 300mA LDO Regulator General Description. Features
Low Noise 300mA LDO Regulator General Description The id9301 is a 300mA with fixed output voltage options ranging from 1.5V, low dropout and low noise linear regulator with high ripple rejection ratio
V-DFN Pin1. Part Number Case Packaging DML1005LDS-7 V-DFN ,000/Tape & Reel
SINGLE CHANNEL SMART LOAD SWITCH Description and Applications The is a single channel load switch with very low onresistance in a small package. It contains an N-channel MOSFET for up to V BIAS-1.5V input
FAN A Adjustable/Fixed Low Dropout Linear Regulator. Features. Description. Applications. Application Diagrams.
www.fairchildsemi.com 4.5A Adjustable/Fixed Low Dropout Linear Regulator Features Fast transient response Low dropout voltage at up to 4.5A Load regulation: 0.5% typical On-chip thermal limiting Standard
( Top View ) OUT1 OUT2 OUT3 OUT4 IN1 IN2 IN3 IN4 IN5 IN6 OUT5 OUT6 OUT7 GND COM ULN2003V12, ULN2003F12. Description. Pin Assignments.
Multi-Channel Relay and Inductive Load Sink Driver Description Pin Assignments The ULN2003V2 and ULN2003F2 are multi-channel sink drivers comprised of 7-channel and 4-channel output stages respectively.
80mA Low Noise Ultra Low Dropout Voltage Regulator
80mA Low Noise Ultra Low Dropout Voltage Regulator DESCRIPTION The TS5204 series is an efficient linear voltage regulator with ultra-low noise output, very low dropout voltage (typically 20mV at light
ATS137. General Description. Features. Applications. Typical Application Circuit 3.5V ~20V ATS137 SINGLE HALL EFFECT SWITCH. V cc. Digital Output GND
Features General Description 3.5V to 20V DC Operation Voltage Temperature Compensation Wide Operating Voltage Range Open-Collector Pre-Driver 25mA Maximum Sinking Output Current Reverse Polarity Protection
Micropower, SC-70, 100mA CMOS LDO Regulator GND 4 V OUT
SP62/SP624 Micropower, SC-7, ma CMOS DO Regulator FEATURES Tiny 5-pin SC-7 Package Guaranteed ma Output 2.5% Output Voltage Accuracy ow Dropout Voltage: 25 mv at ma ow Quiescent Current: 65 µa ow Ground
1A Adjustable/Fixed Low Dropout Linear Regulator. Figure 1. Typical Applications of IMP1117
General Description The IMP1117-ADJ and IMP1117-1.2,-1.5,-1.8,-2.5,-2.85, -3.3 and-5 are low dropout three-terminal regulators with 1A output current capability. These devices have been optimized for low
November 2011 Rev FEATURES. Fig. 1: XRP6272 Application Diagram
November 2011 Rev. 1.2.0 GENERAL DESCRIPTION The XRP6272 is a low dropout voltage regulator capable of a constant output current up to 2 Amps. A wide 1.8V to 6V input voltage range allows for single supply
CS5205A A Adjustable Linear Regulator
5.0 A Adjustable Linear Regulator The linear regulator provides 5.0 A at an adjustable voltage with an accuracy of ±1%. Two external resistors are used to set the output voltage within a 1.25 V to 13 V
PAM2310. Description. Pin Assignments NEW PRODUCT. Applications. Features 2A LOW NOISE STEP-DOWN DC-DC CONVERTER PAM2310
2A LOW NOISE STEP-DOWN DC-DC CONVERTER Description Pin Assignments The is a 2A step-down DC-DC converter. At heavy load, the constant-frequency PWM control performs excellent stability and transient response.