Series AMLD-IZ Up to 2000mA LED Driver

Size: px

Start display at page:

Download "Series AMLD-IZ Up to 2000mA LED Driver"

Drusilla Dickerson
5 years ago
Views:

1 FEATURES: Click on Series name for product info on aimtec.com Up to 2mA LED Driver High Power LED Driver Constant Output Current Wide (7:1) Input Voltage Range High Efficiency (Up to 96%) Remote Control Function PWM Digital Dimming Function (1 9%) 24 Pin DIP Package or 2x1 Inch Package Types Analogue Dimming Function ( 1%) 1 Models Single output Model Input Voltage (Vdc) Output Voltage (Vdc) Maximum Rated Current (ma) Efficiency Max (%) AMLD-363IZ AMLD-3635IZ AMLD-365IZ AMLD-366IZ AMLD-367IZ AMLD-368IZ AMLD-369IZ AMLD-361IZ AMLD-3611IZ AMLD-3612IZ AMLD-3613IZ AMLD-3614IZ AMLD-3615IZ AMLD-3616IZ AMLD-3618IZ AMLD-362IZ NOTE: All specifications in this datasheet are measured at an ambient temperature of 25 C, humidity<75%, nominal input voltage and at rated output load unless otherwise specified. 1- Analogue dimming is not supported on 1.6A, 1.8A, 2.A models Input Specifications Parameters Nominal Typical Maximum Units Voltage range VDC On/Off Control (Analog Control) ON: Open or V> V <.6V Input voltage range (-12Vdc) (Leave open if not used) OFF:.6V> V <5V (1mA Max) Dimming Control (Digital Control) Max PWM Frequency (1%~9%) 2Hz / 2KHz for all models Dimming Control (Analog Control) -4.5V (1mA max) Analog Voltage (%~1%) models: AMLD-363IZ, AMLD-3635IZ, Input voltage range (-12Vdc)* AMLD-365IZ (Leave open if not used) -6.5V (1mA max) Analog Voltage (%~1%) models: AMLD-366IZ, AMLD-367IZ, For models with 1.5A and below AMLD-368IZ, AMLD-369IZ, AMLD-361IZ, AMLD-3611IZ, AMLD-3612IZ NOTE: Exceeding 12Vdc on Dimming Control pin will damage the converter. Output Specifications Parameters Conditions Typical Maximum Units Current accuracy ±2 % Short Circuit protection Regulated at the rated current for each model Output Open Protection No Load Max load capacitance 1 µf Ripple & Noise 2MHz Bandwidth 3 mv p-p General Specifications Parameters Conditions Typical Maximum Units Switching frequency 1% load MHz for 1.6A, 1.8A, 2.A models KHz -4 to +85 Operating temperature o C -4 to +7 (1.2A, 1.3A, & 1.5A, 1.6A, 1.8A, 2.A models) Storage temperature -4 to +125 o C Max Case temperature 1 o C Cooling Free Air Convection Tel: Toll free: AIMTEC ( ) F 51e R12.R 1 of 13 North America only

2 Up to 2mA LED Driver Thermal Impedance o C/W Humidity 95 % RH Case material Non-Conductive Black Plastic, Nickel-Coated Copper 1.3A, 1.4A & 1.5A models) Potting material Epoxy (Flammability UL94V-) Weight 12 g inches / mm Dimensions (L x W x H) inches / mm (1.3A, 1.4A, & 1.5A models) 1.99 x.99 x.37 inches / 5.7 x 25.3 x 9.55 mm (1.6A, 1.8A, 2.A models) Safety Specifications Parameters Agency approvals Standards CE EN 5522, class B EN5524 IEC (Perf. Criteria B) IEC (Perf. Criteria A) IEC (Perf. Criteria A) IEC (Perf. Criteria A) Pin Out Specifications Pin Single 1 Remote On/Off 2 -Vin 3 -Vin 9 NC 11 NC 14 LED + 16 LED Vin 23 +Vin 24 DIM NC: Not Connected Dimensions (.3A to 1.2A models) Mechanical Tolerances Case tolerance ±.25mm or ±.1 inches Pin tolerance ±.5 or ±.2 Tel: Toll free: AIMTEC ( ) F 51e R12.R 2 of 13 North America only

3 Dimensions (1.3A, 1.4A, & 1.5A models) Up to 2mA LED Driver Dimensions (1.6A, 1.8A, & 2.A models) Pin Single 1 +Vin 2 -Vin Remote On/Off & 3 PWM Dimming 4 LED + 5 LED - Tel: Toll free: AIMTEC ( ) F 51e R12.R 3 of 13 North America only

4 Up to 2mA LED Driver Efficiency versus Input Voltage 1 Efficiency (%) Input Voltage (V) Derating 3 Tel: Toll free: AIMTEC ( ) F 51e R12.R 4 of 13 North America only

5 Application Circuit Up to 2mA LED Driver + Vin Dimming 1 st LED C1.1uF If analogue DIM is not used C1 must be installed Dim + Vin AMLD-IZ LED + ON/OFF Leave Open if not used GND ON/OFF GND LED - Last LED Note: The relation between input and output voltage for AMLD-IZ LED Driver step-down converter series is: Vin 4V Vout Total LED voltage Vout / LED voltage = LED quantity Output Current versus Dimming Voltage 35 AMLD-363IZ V 1V 2V 3V 4V 5V Tel: Toll free: AIMTEC ( ) F 51e R12.R 5 of 13 North America only

6 Output Current versus Dimming Voltage (continued) Up to 2mA LED Driver AMLD-3635IZ V 1V 2V 3V 4V 5V AMLD-365IZ V 1V 2V 3V 4V 5V Tel: Toll free: AIMTEC ( ) F 51e R12.R 6 of 13 North America only

7 Up to 2mA LED Driver Output Current versus Dimming Voltage (continued) AMLD-366IZ V 1V 2V 3V 4V 5V AMLD-367IZ V 1V 2V 3V 4V 5V 6V Tel: Toll free: AIMTEC ( ) F 51e R12.R 7 of 13 North America only

8 Up to 2mA LED Driver Output Current versus Dimming Voltage (continued) AMLD-368IZ V 1V 2V 3V 4V 5V 6V AMLD-369IZ V 1V 2V 3V 4V 5V 6V Tel: Toll free: AIMTEC ( ) F 51e R12.R 8 of 13 North America only

9 Up to 2mA LED Driver Output Current versus Dimming Voltage (continued) 12 AMLD-361IZ V 1V 2V 3V 4V 5V 6V AMLD-3611IZ V 1V 2V 3V 4V 5V 6V Tel: Toll free: AIMTEC ( ) F 51e R12.R 9 of 13 North America only

10 Output Current versus Dimming Voltage (continued) Up to 2mA LED Driver AMLD-3612IZ V 1V 2V 3V 4V 5V 6V Tel: Toll free: AIMTEC ( ) F 51e R12.R 1 of 13 North America only

11 Output Current versus Dimming Voltage (continued) Up to 2mA LED Driver Tel: Toll free: AIMTEC ( ) F 51e R12.R 11 of 13 North America only

12 Up to 2mA LED Driver Iout(mA) 16 Output current vs VADJ AMLD-3514IZ Tel: Toll free: AIMTEC ( ) F 51e R12.R 12 of 13 North America only

13 Output Current versus Dimming Voltage (continued) Up to 2mA LED Driver NOTE: 1. Datasheets are updated as needed and as such, specifications are subject to change without notice. Once printed or downloaded, datasheets are no longer controlled by Aimtec; refer to for the most current product specifications. 2. Product labels shown, including safety agency certifications on labels, may vary based on the date manufactured. 3. Mechanical drawings and specifications are for reference only. 4. All specifications are measured at an ambient temperature of 25 C, humidity<75%, nominal input voltage and at rated output load unless otherwise specified. 5. Aimtec may not have conducted destructive testing or chemical analysis on all internal components and chemicals at the time of publishing this document. CAS numbers and other limited information are considered proprietary and may not be available for release. 6. This product is not designed for use in critical life support systems, equipment used in hazardous environments, nuclear control systems or other such applications which necessitate specific safety and regulatory standards other the ones listed in this datasheet. 7. Warranty is in accordance with Aimtec s standard Terms of Sale available at Tel: Toll free: AIMTEC ( ) F 51e R12.R 13 of 13 North America only

Series AMLDV-NZ Up to 700mA LED Driver

Series AMLDV-NZ Up to 700mA LED Driver FEATURES: Click on Series name for product info on aimtec.com Models Single output Model Input Voltage (V) Maximum Rated Current (ma) Efficiency Max (%) AMLDV-43-NZ 5.5-4 3.3-36 3 6 AMLDV-435-NZ 5.5-4