YDP-S34. MIDI Reference. Table of Contents

Transcription

1 YDP-S34 MIDI Reference Table of Contents MIDI Functions...2 MIDI Transmit/Receive Channel Selection...2 Local Control ON/OFF...2 Program Change ON/OFF...3 Control Change ON/OFF...3 Changing Playback Channels...3 MIDI Data Format...4 MIDI Implementation Chart...14 EN

2 MIDI Functions When this instrument and a computer are connected with a USB cable, MIDI communication can be performed. The explanations here cover the settings necessary for performing MIDI communication between both devices. For instructions on how to connect this instrument to the computer, refer to the Computer-related Operations downloadable from the Yamaha Downloads website. MIDI Transmit/Receive Channel Selection In order to perform MIDI communication between this instrument and a computer, it is necessary to match the corresponding MIDI transmit and receive channels. By setting the MIDI transmit channels on this instrument, the setting of the keyboard or pedal performance or the program change can be transmitted over the channel number corresponding to a specified channel on the computer. By properly setting the MIDI receive channels on this instrument, only data of the specified channel will be played back in the MIDI data received from the computer. Setting the MIDI Transmit Channel While holding down [DEMO/SONG] and [PIANO/VOICE], press the C4 D#4keys. Default setting: Ch 1 Setting range: Ch 1 16, off Setting the MIDI Receive Channel While holding down [DEMO/SONG] and [PIANO/VOICE], press the F4 A4 keys. Default setting: ALL Setting range: Ch 1 16, 1+2, ALL MIDI Transmit Channel D#4 (Off) C#4 (Ch 1) MIDI Receive Channel F#4 (Ch 1) G#4 (Ch 1+2) MIDI transmission channels in Dual Voice 1 data is transmitted on the channel set up here. Voice 2 data is transmitted on the next greater channel number relative to the specified channel. MIDI receive channel = ALL: This allows simultaneous reception of different parts on all 16 MIDI channels. When SMF data is played back on a computer with the Voice of this instrument, this setting is selected. However, when a Voice not available on the instrument is specified, the playback sound may not be suitable. MIDI receive channel = 1+2: This allows simultaneous reception on channels 1 and 2 only. When SMF data is played back on a computer, this setting is selected for playing back only data of channels 1 2 on this instrument. C4 (1 step down) D4 (1 step up) A4 (ALL) G4 (1 step up) F4 (1 step down) Highest key settings (Voices, etc.) of this instrument will not be affected by MIDI messages received from a computer. Data for the Demo s and Preset s cannot be transmitted via MIDI. Local Control ON/OFF Local Control refers to the fact that, normally, the keyboard of the instrument controls its internal tone generator, allowing the internal voices to be played directly from the keyboard. This situation is Local Control On, since the internal tone generator is controlled locally by its own keyboard. Local Control can be turned off as desired, so that the keyboard of the instrument does not play the internal voices. While holding down [DEMO/SONG] and [PIANO/VOICE], press the C5 key. Pressing the C5 key repeatedly toggles between Local Control On and Off. Default setting: ON C5 Highest key YDP-S34 MIDI Reference 2

3 MIDI Functions Program Change ON/OFF The information related to Voice changes is called program change in MIDI. Sending and receiving program change messages can be enabled or disabled as desired on this instrument. For example, if the relevant transmit and receive parameters are set to ON, Voice change information in this instrument can be transmitted to or received from a computer. (However, the Voice as played from the keyboard is maintained and does not change.) While holding down [DEMO/SONG] and [PIANO/VOICE], press the C#5 key. Pressing the C#5 key repeatedly toggles between Local Control On and Off. C#5 For information on program change numbers for each of the Voices of the instrument, refer to page 4. Default setting: ON Highest key (C7) Control Change ON/OFF Information related to non-note expressive changes, such as the use of a sustain pedal, is called control change in MIDI. Sending and receiving control change messages can be enabled or disabled as desired on this instrument. For example, if the relevant transmit and receive parameters are set to ON, pedal performance information on this instrument can be transmitted to or received from a computer. (However, the performance of pedals and other controls as played from the instrument is maintained and does not change.) While holding down [DEMO/SONG] and [PIANO/VOICE], press the D5 key. Pressing the D5 key repeatedly toggles between Local Control On and Off. For information on control changes that can be used with the instrument, refer to page 5. Default setting: ON D5 Highest key Changing Playback Channels Try this operation when playback of s loaded from the computer produces an unexpected or unnatural sound. To set Playback Channels to 1+2 : While holding down [DEMO/SONG] and [PIANO/VOICE] simultaneously, press the C7 key. With this operation, the data of only channels 1 and 2 will be played back. When Voices incompatible with this instrument are assigned to channels 3 16 and the Piano parts are assigned to the channels 1 and 2, this operation results in the proper or expected sound. To set Playback Channels to ALL : While holding down [DEMO/SONG] and the [PIANO/VOICE] simultaneously, press the B6 key. With this operation, the data of all channels will be played back. B6 (ALL) C7 (1+2) Highest key YDP-S34 MIDI Reference 3

4 Preset Voice List Voice Name MSB (0-127) LSB (0-127) Program Change # (1-128) CFX Grand Mellow Grand Pop Grand Stage E.Piano DX E.Piano Harpsichord Vibraphone Pipe Organ Jazz Organ Strings YDP-S34 MIDI Reference 4

5 MIDI CHANNEL MESSAGE (1) Application Range MIDI, Internal Sequencer MIDI Events Status byte 1st Data byte 2nd Data byte MIDI Formats Status Data (Hex) Parameter Data (Hex) Parameter Key Off 8nH (n: Channel Number) kk Key no. (0-127) vv Velocity (0-127) [GM1] Key On 9nH (n: Channel Number) kk Key no. (0-127) vv Key On: vv=1-127 Key Off: vv=0 * of Channels from 3 to 16 will be transmitted only when Playback Channels (page 3) is set to 1+2. [GM1] MIDI Reception MIDI Transmission * (Keyboard) (Keyboard) Control Change BnH 0 (00H) Bank Select MSB (00H...7FH) (00) Normal 1 (01H) Modulation (00H...7FH) Data [GM1] 5 (05H) Portamento Time (00H...7FH) Data 6 (06H) Data Entry MSB (00H...7FH) Data 7 (07H) Volume (00H...7FH) Data [GM1] 10 (0AH) Panpot (00H...7FH) L64...C...R63 [GM1] 11 (0BH) Expression (00H...7FH) Data [GM1] (Duo) 32 (20H) Bank Select LSB (00H...7FH) Data 38 (26H) Data Entry LSB (00H...7FH) Data 64 (40H) Sustain (Damper) (00H...7FH) Data [GM1] 65 (41H) Portamento (00H...7FH) , (OFF, ON) 66 (42H) Sostenuto (00H...7FH) , (OFF, ON) 67 (43H) Soft Pedal (00H...7FH) , (OFF, ON) (Pedal) (Pedal) (Pedal) 71 (47H) Harmonic Content (00H...7FH) (48H) Release Time (00H...7FH) (49H) Attack Time (00H...7FH) (4AH) Brightness (00H...7FH) (4BH) Decay Time (00H...7FH) (4CH) Vibrate Rate (00H...7FH) (4DH) Vibrate Depth (00H...7FH) (4EH) Vibrate Delay (00H...7FH) (54H) Portamento Control (00H...7FH) Key no. (0-127) 91 (5BH) Effect1 Depth (Reverb Send Level) (00H...7FH) Data 93 (5DH) Effect3 Depth (Chorus Send Level) 94 (5EH) Effect4 Depth (Variation Send Level) (00H...7FH) Data (00H...7FH) Data 96 (60H) RPN Increment The data byte is ignored. 97 (61H) RPN Decrement The data byte is ignored. 98 (62H) NRPN LSB (00H...7FH) Data 99 (63H) NRPN MSB (00H...7FH) Data 100 (64H) RPN LSB (00H...7FH) Data 101 (65H) RPN MSB (00H...7FH) Data Mode Message BnH (n: Channel Number) 120 (78H) All Sound Off 0 (00H) Data 121 (79H) Reset All Controllers 0 (00H) Data [GM1] 122 (7AH) Local Control (00H) (7FH) OFF ON 123 (7BH) All Note Off 0 (00H) Data [GM1] 124 (7CH) Omni Off 0 (00H) Data 125 (7DH) Omni On 0 (00H) Data 126 (7EH) Mono 0-16 (00H...10H) Data 127 (7FH) Poly 0 (00H) Data Program Change CnH (n: Channel Number) pp (00H...7FH) Voice number (0-127) [GM1] Channel After Touch DnH (n: Channel Number) vv (00H...7FH) Data [GM1] Polyphonic After Touch Pitch Bend Change EnH (n: Channel Number) cc (00H...7FH) LSB dd (00H...7FH) MSB [GM1] AnH (n: Channel Number) kk (00H...7FH) Key no. (0-127) vv (00H...7FH) Data Realtime Message F8H MIDI Clock FAH Start FBH Continue FCH Stop FEH Active Sens FFH System Reset YDP-S34 MIDI Reference 5

6 MIDI CHANNEL MESSAGE (2) Application Range MIDI, Internal Sequencer NRPN (Non Registered Parameter Number) NRPN Data Entry MSB LSB MSB LSB MIDI Parameter Data Range Formats * 01H 08H mmh Vibrato Rate mm: 00H-40H-7FH ( ) 01H 09H mmh Vibrato Depth mm: 00H-40H-7FH ( ) 01H 0AH mmh Vibrato Delay mm: 00H-40H-7FH ( ) 01H 20H mmh Low Pass Filter Cutoff Frequency mm: 00H-40H-7FH ( ) 01H 21H mmh Low Pass Filter Resonance mm: 00H-40H-7FH ( ) 01H 30H mmh EQ BASS mm: 00H-40H-7FH ( ) 01H 31H mmh EQ TREBLE mm: 00H-40H-7FH ( ) 01H 34H mmh EQ BASS Frequency mm: 04H-28H ( k [Hz]) 01H 35H mmh EQ TREBLE Frequency mm: 1CH-3AH ( k [Hz]) 01H 63H mmh EG Attack Time mm: 00H-40H-7FH ( ) 01H 64H mmh EG Decay Time mm: 00H-40H-7FH ( ) 01H 66H mmh EG Release mm: 00H-40H-7FH ( ) 14H rrh mmh Drum Low Pass Filter Cutoff Frequency rr: drum instrument note number mm: 00H-40H-7FH ( ) 15H rrh mmh Drum Low Pass Filter Resonance rr: drum instrument note number mm: 00H-40H-7FH ( ) 16H rrh mmh Drum EG Attack Rate rr: drum instrument note number mm: 00H-40H-7FH ( ) 17H rrh mmh Drum EG Decay Rate rr: drum instrument note number mm: 00H-40H-7FH ( ) 18H rrh mmh Drum Pitch Coarse rr: drum instrument note number mm: 00H-40H-7FH ( ) 19H rrh mmh Drum Pitch Fine rr: drum instrument note number mm: 00H-40H-7FH ( ) 1AH rrh mmh Drum Level rr: drum instrument note number mm: 00H-7FH ( ) 1CH rrh mmh Drum Pan rr: drum instrument note number mm: 00H, 01H-40H-7FH (RND, L63...C...R63) 1DH rrh mmh Drum Reverb Send Level rr: drum instrument note number mm: 00H-7FH ( ) 1EH rrh mmh Drum Chorus Send Level rr: drum instrument note number mm: 00H-7FH ( ) 1FH rrh mmh Drum Variation Send Level rr: drum instrument note number mm: 00H-7FH ( ) 24H rrh mmh Drum HPF Cutoff Frequency rr: drum instrument note number mm: 00H-40H-7FH ( ) 30H rrh mmh Drum EQ Bass Gain rr: drum instrument note number mm: 00H-7FH ( ) 31H rrh mmh Drum EQ Treble Gain rr: drum instrument note number mm: 00H-7FH ( ) 34H rrh mmh Drum EQ Bass Frequency rr: drum instrument note number mm: 04H-28H ( k [Hz]) 35H rrh mmh Drum EQ Treble Frequency rr: drum instrument note number mm: 1CH-3AH ( k [Hz]) 40H rrh mmh Drum VELOCITY PITCH SENS. rr: drum instrument note number mm: 00H-0FH (0...15) 41H rrh mmh Drum VELOCITY LPF CUTOFF SENS. rr: drum instrument note number mm: 00H-0FH (0...15) NRPN MSB: 14H-1FH (for drums) message is accepted as long as the channel is set with a drum voice. Data Entry LSB: Ignored. RPN (Registered Parameter Number) NRPN Data Entry MIDI Parameter Data Range Formats MSB LSB MSB LSB (respond/ignored) (generated data) * 00H 00H mmh Pitch Bend Sensitivity mm: 00H-18H ( [semitones]) [GM1] 00H 01H mmh llh Fine Tune mm ll: 00H 00H -100 [cent] [GM1]... mm ll: 40H 00H 0 [cent]... mm ll: 7FH 7FH 100 [cent] 00H 02H mmh Coarse Tune mm: 28H-40H-58H ( [semitones]) [GM1] 00H 05H mmh llh Modulation Sensitivity mm: Specified in semitone steps ll: Specified in 100/128 cent steps 7FH 7FH Null * of Channels from 3 to 16 will be transmitted only when Playback Channels (page 3) is set to 1+2. YDP-S34 MIDI Reference 6

7 MIDI PARAMETER CHANGE TABLE Application Range MIDI, Internal Sequencer Not Received when Receive Parameter SysEx is set to off. Not transmitted when Transmit Parameter SysEx is set to off. MIDI Parameter Change Table (XG SYSTEM) F 00-0F 00-0F 00-0F Data Parameter Description MASTER TUNE [cent] 1st bit3-0 bit nd bit3-0 bit11-8 3rd bit3-0 bit7-4 4th bit3-0 bit3-0 XG Default * setting value 04 1 MASTER VOLUME F 05 1 MASTER ATTENUATOR TRANSPOSE [semitones] 40 7D 1 N DRUM SETUP RESET N: Drum setup number 7E 1 00 XG SYSTEM ON 00=XG system ON 7F 1 00 ALL PARAMETER RESET 00=ON TOTAL SIZE 07 MIDI Parameter Change Table (SYSTEM INFORMATION) D 0E 1 NOT USED 0F 1 NOT USED TOTAL SIZE 10 Data Parameter Description E 20-7F F Model Name 1... Model Name (ASCII CHARACTER) (ASCII CHARACTER) Transmitted in response to Dump Request. Not received. MIDI Parameter Change Table (EFFECT1) TOTAL SIZE XG Default Data Parameter Description REVERB TYPE MSB Refer to Effect MIDI Map below. 01 (=HALL1) REVERB TYPE LSB 00 (Reverb Type) 02 1 REVERB PARAMETER 1 *1 * REVERB PARAMETER 2 *1 * REVERB PARAMETER 3 *1 * REVERB PARAMETER 4 *1 * REVERB PARAMETER 5 *1 * REVERB PARAMETER 6 *1 * REVERB PARAMETER 7 *1 * REVERB PARAMETER 8 *1 *1 0A 1 REVERB PARAMETER 9 *1 *1 0B 1 REVERB PARAMETER 10 *1 *1 0C 1 REVERB RETURN - db...0db...+6db ( ) 40 0D F REVERB PAN L63...C...R E REVERB PARAMETER 11 Refer to Effect MIDI Map below. *1 * REVERB PARAMETER 12 *1 * REVERB PARAMETER 13 *1 * REVERB PARAMETER 14 *1 * REVERB PARAMETER 15 *1 * REVERB PARAMETER 16 *1 *1 TOTAL SIZE 06 Depends on Reverb Type. Effect MIDI Map (Reverb) MSB LSB RECITAL HALL 01H 18H CONCERT HALL 01H 04H CHAMBER 02H 18H CLUB 03H 18H OFF 00H 00H Data Parameter CHORUS TYPE MSB CHORUS TYPE LSB Description XG Default 41 (=CHORUS1) CHORUS PARAMETER 1 *2 * CHORUS PARAMETER 2 *2 * CHORUS PARAMETER 3 *2 * CHORUS PARAMETER 4 *2 *2 YDP-S34 MIDI Reference 7

8 TOTAL SIZE 26 1 CHORUS PARAMETER 5 *2 * CHORUS PARAMETER 6 *2 * CHORUS PARAMETER 7 *2 * CHORUS PARAMETER 8 *2 *2 2A 1 CHORUS PARAMETER 9 *2 *2 2B 1 CHORUS PARAMETER 10 *2 *2 2C 1 CHORUS RETURN - db...0db...+6db ( ) 40 2D F CHORUS PAN L63...C...R E 1 SEND CHORUS TO REVERB - db...0db...+6db ( ) 00 0F Data Parameter Description XG Default CHORUS PARAMETER 11 *2 * CHORUS PARAMETER 12 *2 * CHORUS PARAMETER 13 *2 * CHORUS PARAMETER 14 *2 * CHORUS PARAMETER 15 *2 * CHORUS PARAMETER 16 *2 *2 TOTAL SIZE 06 *2 Depends on Chorus Type A 2 4C 2 4E TOTAL SIZE 21 Data Parameter Description VARIATION TYPE MSB VARIATION TYPE LSB VARIATION PARAMETER 1 MSB VARIATION PARAMETER 1 LSB VARIATION PARAMETER 2 MSB VARIATION PARAMETER 2 LSB VARIATION PARAMETER 3 MSB VARIATION PARAMETER 3 LSB VARIATION PARAMETER 4 MSB VARIATION PARAMETER 4 LSB VARIATION PARAMETER 5 MSB VARIATION PARAMETER 5 LSB VARIATION PARAMETER 6 MSB VARIATION PARAMETER 6 LSB VARIATION PARAMETER 7 MSB VARIATION PARAMETER 7 LSB VARIATION PARAMETER 8 MSB VARIATION PARAMETER 8 LSB VARIATION PARAMETER 9 MSB VARIATION PARAMETER 9 LSB VARIATION PARAMETER 10 MSB VARIATION PARAMETER 10 LSB XG Default 05 (=DELAY L, C, R) 00 *3 *3 *3 *3 *3 *3 *3 *3 *3 *3 *3 *3 *3 *3 *3 *3 *3 *3 *3 * VARIATION RETURN - db...0db...+6db ( ) F VARIATION PAN L63...C...R SEND VARIATION TO REVERB - db...0db...+6db ( ) SEND VARIATION TO CHORUS - db...0db...+6db ( ) 00 5A VARIATION CONNECTION INSERTION, SYSTEM 00 5B 1 VARIATION PART NUMBER Reception: Part (0...15) 7F Transmission: Part (0...15) AD (64) OFF (127) 5C 1 MW VARIATION CONTROL DEPTH D 1 BEND VARIATION CONTROL DEPTH E 1 CAT VARIATION CONTROL DEPTH F 1 AC1 VARIATION CONTROL DEPTH AC2 VARIATION CONTROL DEPTH VARIATION PARAMETER 11 *3 * VARIATION PARAMETER 12 *3 * VARIATION PARAMETER 13 *3 * VARIATION PARAMETER 14 *3 * VARIATION PARAMETER 15 *3 * VARIATION PARAMETER 16 *3 *3 TOTAL SIZE 06 *3 Depends on Variation Type. MIDI Parameter Change Table (MULTI EQ) *The MULTI EQ Parameter cannot be Data Parameter Description reset to its factory setting with XG SYSTEM ON EQ TYPE flat, jazz, pops, rock, classic C EQ GAIN [db] EQ FREQUENCY k [Hz] EQ Q EQ SHAPE1 shelving, peaking C EQ GAIN [db] E-36 EQ FREQUENCY k [Hz] EQ Q NOT USED C EQ GAIN [db] 0A 1 0E-36 EQ FREQUENCY k [Hz] YDP-S34 MIDI Reference 8

9 TOTAL SIZE 15 *The MULTI EQ Parameter cannot be Data Parameter Description reset to its factory setting with XG SYSTEM ON. 0B EQ Q C 1 NOT USED 0D C EQ GAIN [db] 0E 1 0E-36 EQ FREQUENCY k [Hz] 0F EQ Q NOT USED C EQ GAIN [db] C-3A EQ FREQUENCY5 0.5k k [Hz] EQ Q EQ SHAPE5 shelving, peaking MIDI Parameter Change Table (EFFECT2) TOTAL SIZE 12 Data 03 n 00 2 Parameter INSERTION EFFECT TYPE MSB INSERTION EFFECT TYPE LSB Description *The EFFECT 2 Parameter cannot be reset to its factory setting with XG SYSTEM ON INSERTION EFFECT PARAMETER 1 * INSERTION EFFECT PARAMETER 2 * INSERTION EFFECT PARAMETER 3 * INSERTION EFFECT PARAMETER 4 * INSERTION EFFECT PARAMETER 5 * INSERTION EFFECT PARAMETER 6 * INSERTION EFFECT PARAMETER 7 * INSERTION EFFECT PARAMETER 8 *4 0A 1 INSERTION EFFECT PARAMETER 9 *4 0B 1 INSERTION EFFECT PARAMETER 10 *4 0C 1 INSERTION EFFECT PART NUMBER Reception: Part (0...15) Transmission: Part (0...15) AD (64) OFF (127) 0D 1 MW INSERTION CONTROL DEPTH E 1 BEND INSERTION CONTROL DEPTH F 1 CAT INSERTION CONTROL DEPTH AC1 INSERTION CONTROL DEPTH AC2 INSERTION CONTROL DEPTH TOTAL SIZE INSERTION EFFECT PARAMETER 11 * INSERTION EFFECT PARAMETER 12 * INSERTION EFFECT PARAMETER 13 * INSERTION EFFECT PARAMETER 14 * INSERTION EFFECT PARAMETER 15 * INSERTION EFFECT PARAMETER 16 *4 TOTAL SIZE 14 *4 Depends on Insertion Type A 2 3C 2 3E INSERTION EFFECT PARAMETER 1 MSB INSERTION EFFECT PARAMETER 1 LSB INSERTION EFFECT PARAMETER 2 MSB INSERTION EFFECT PARAMETER 2 LSB INSERTION EFFECT PARAMETER 3 MSB INSERTION EFFECT PARAMETER 3 LSB INSERTION EFFECT PARAMETER 4 MSB INSERTION EFFECT PARAMETER 4 LSB INSERTION EFFECT PARAMETER 5 MSB INSERTION EFFECT PARAMETER 5 LSB INSERTION EFFECT PARAMETER 6 MSB INSERTION EFFECT PARAMETER 6 LSB INSERTION EFFECT PARAMETER 7 MSB INSERTION EFFECT PARAMETER 7 LSB INSERTION EFFECT PARAMETER 8 MSB INSERTION EFFECT PARAMETER 8 LSB INSERTION EFFECT PARAMETER 9 MSB INSERTION EFFECT PARAMETER 9 LSB INSERTION EFFECT PARAMETER 10 MSB INSERTION EFFECT PARAMETER 10 LSB *4 *4 *4 *4 *4 *4 *4 *4 *4 *4 The second byte of the address is considered as an Insertion effect number. n : insertion effect number The Insertion Effect No. range is from 0 to 1. Values outside the range are handled as unknown and ignored. For effect types that do not require MSB, the Parameters for 02-0B will be received and the Parameters for will not be received. For effect types that require MSB, the Parameters for will be received and the Parameters for 02-0B will not be received. When bulk dumps that include Effect Type data are transmitted, the parameters for addresses 02-0B will always be transmitted. For effects that require MSB however, when a bulk dump is received, the parameters for addresses 02-0B will not be received. YDP-S34 MIDI Reference 9

10 MIDI Parameter Change Table (MULTI PART) TOTAL SIZE 29 Data Parameter Description XG Default 08 nn NOT USED 01 1 BANK SELECT MSB part 10=7F, other parts= BANK SELECT LSB PROGRAM NUMBER F, 7F Rcv CHANNEL , OFF Part No MONO/POLY MODE MONO, POLY SAME NOTE NUMBER KEY ON ASSIGN SINGLE, MULTI, INST (for Drum) PART MODE NORMAL, DRUM, DRUMS1...2 part 10=02, other parts= NOTE SHIFT [semitones] F 00-0F DETUNE [Hz] 1st bit3-0 bit7-4 2nd bit3-0 bit B 1 VOLUME C 1 VELOCITY SENSE DEPTH D 1 VELOCITY SENSE OFFSET E 1 PAN RND, L63...C...R F 1 NOTE LIMIT LOW C-2...G NOTE LIMIT HIGH C-2...G8 7F 11 1 DRY LEVEL F 12 1 CHORUS SEND REVERB SEND VARIATION SEND VIBRATO RATE VIBRATO DEPTH VIBRATO DELAY FILTER CUTOFF FREQUENCY FILTER RESONANCE A 1 EG ATTACK TIME B 1 EG DECAY TIME C 1 EG RELEASE TIME D MW PITCH CONTROL [semitones] 40 1E 1 MW LOW PASS FILTER CONTROL [cent] 40 1F 1 MW AMPLITUDE CONTROL [%] MW LFO PMOD DEPTH A 21 1 MW LFO FMOD DEPTH MW LFO AMOD DEPTH BEND PITCH CONTROL [semitones] BEND LOW PASS FILTER CONTROL [cent] BEND AMPLITUDE CONTROL [%] BEND LFO PMOD DEPTH BEND LFO FMOD DEPTH BEND LFO AMOD DEPTH Rcv PITCH BEND OFF, ON Rcv CH AFTER TOUCH (CAT) OFF, ON Rcv PROGRAM CHANGE OFF, ON Rcv CONTROL CHANGE OFF, ON Rcv POLY AFTER TOUCH (PAT) OFF, ON Rcv NOTE MESSAGE OFF, ON Rcv RPN OFF, ON Rcv NRPN OFF, ON XG mode=01, GM mode= Rcv MODULATION OFF, ON Rcv VOLUME OFF, ON 01 3A Rcv PAN OFF, ON 01 3B Rcv EXPRESSION OFF, ON 01 3C Rcv HOLD1 OFF, ON 01 3D Rcv PORTAMENTO OFF, ON 01 3E Rcv SOSTENUTO OFF, ON 01 3F Rcv SOFT PEDAL OFF, ON Rcv BANK SELECT OFF, ON SCALE TUNING C [cent] SCALE TUNING C# [cent] SCALE TUNING D [cent] SCALE TUNING D# [cent] SCALE TUNING E [cent] SCALE TUNING F [cent] SCALE TUNING F# [cent] SCALE TUNING G [cent] SCALE TUNING G# [cent] 40 4A 1 SCALE TUNING A [cent] 40 4B 1 SCALE TUNING A# [cent] 40 4C 1 SCALE TUNING B [cent] 40 4D CAT PITCH CONTROL [semitones] 40 4E 1 CAT LOW PASS FILTER CONTROL [cent] 40 4F 1 CAT AMPLITUDE CONTROL [%] CAT LFO PMOD DEPTH CAT LFO FMOD DEPTH CAT LFO AMOD DEPTH PAT PITCH CONTROL [semitones] PAT LOW PASS FILTER CONTROL [cent] PAT AMPLITUDE CONTROL [%] PAT LFO PMOD DEPTH PAT LFO FMOD DEPTH YDP-S34 MIDI Reference 10

11 TOTAL SIZE 58 1 PAT LFO AMOD DEPTH F AC1 CONTROLLER NUMBER A AC1 PITCH CONTROL [semitones] 40 5B 1 AC1 LOW PASS FILTER CONTROL [cent] 40 5C 1 AC1 AMPLITUDE CONTROL [%] 40 5D 1 AC1 LFO PMOD DEPTH E 1 AC1 LFO FMOD DEPTH F 1 AC1 LFO AMOD DEPTH F AC2 CONTROLLER NUMBER AC2 PITCH CONTROL [semitones] AC2 LOW PASS FILTER CONTROL [cent] AC2 AMPLITUDE CONTROL [%] AC2 LFO PMOD DEPTH AC2 LFO FMOD DEPTH AC2 LFO AMOD DEPTH PORTAMENTO SWITCH OFF, ON PORTAMENTO TIME PITCH EG INITIAL LEVEL A 1 PITCH EG ATTACK TIME B 1 PITCH EG RELEASE LEVEL C 1 PITCH EG RELEASE TIME D F VELOCITY LIMIT LOW E F VELOCITY LIMIT HIGH F 3F 70 1 NOT USED 71 1 NOT USED 72 1 EQ BASS GAIN -12dB...+12dB EQ TREBLE GAIN -12dB...+12dB 40 TOTAL SIZE 04 TOTAL SIZE 74 1 NOT USED 75 1 NOT USED EQ BASS FREQUENCY k [Hz] 0C C-3A EQ TREBLE FREQUENCY k [Hz] NOT USED 79 1 NOT USED 7A 1 NOT USED 7B 1 NOT USED 7C 1 NOT USED 7D 1 NOT USED 7E 1 NOT USED 7F 1 NOT USED 0C 0A nn 40 1 MW OFFSET LEVEL CONTROL [%] BEND OFFSET LEVEL CONTROL [%] CAT OFFSET LEVEL CONTROL [%] PAT OFFSET LEVEL CONTROL [%] AC1 OFFSET LEVEL CONTROL [%] AC2 OFFSET LEVEL CONTROL [%] 40 TOTAL SIZE 06 nn = PART NUMBER If there is a Drum Voice assigned to the part, the following parameters are ineffective. BANK SELECT LSB PORTAMENTO MONO/POLY SCALE TUNING POLY AFTER TOUCH PITCH EG MIDI Parameter Change Table (DRUM SETUP) Data XG Default Parameter Description 3n rr 00 1 PITCH COARSE PITCH FINE [cent] LEVEL * ALTERNATE GROUP OFF, * PAN RND, L63...C...R63 * REVERB SEND * CHORUS SEND * VARIATION SEND F KEY ASSIGN SINGLE, MULTI Rcv NOTE OFF OFF, ON *5 0A Rcv NOTE ON OFF, ON 01 0B 1 LOW PASS FILTER CUTOFF FREQUENCY C 1 LOW PASS FILTER RESONANCE D 1 EG ATTACK RATE E 1 EG DECAY1 RATE F 1 EG DECAY2 RATE TOTAL SIZE 10 *5 Depends on the note EQ BASS GAIN [db] EQ TREBLE GAIN [db] NOT USED 23 1 NOT USED EQ BASS FREQUENCY k [Hz] 0C C-3A EQ TREBLE FREQUENCY k [Hz] 36 YDP-S34 MIDI Reference 11

12 TOTAL SIZE 26 1 NOT USED 27 1 NOT USED 28 1 NOT USED 29 1 NOT USED 2A 1 NOT USED 2B 1 NOT USED 2C 1 NOT USED 2D 1 NOT USED 0E n: Drum Setup Number (0-1) rr: note number (0D-5B) In the following cases, the instrument will initialize all Drum Setups. XG SYSTEM ON received GM SYSTEM ON received GM LEVEL2 SYSTEM ON received GS RESET received DRUM SETUP RESET received (only when in XG mode) NOTICE When a part to which a Drum Setup is assigned receives a program change, the assigned Drum Setup will be initialized. If the same Drum Setup is assigned to two or more parts, changes in Drum Setup parameters (including program changes) will apply to all parts to which it is assigned. System Exclusive Messages (1) Application Range MIDI, Internal Sequencer Not Received when Receive Parameter SysEx is set to off. Not transmitted when Transmit Parameter SysEx is set to off. System Exclusive Messages (Universal Non-Real Time Messages) MIDI Event GM1 System On General MIDI System Off Data Format F0 7E XN F E = Universal Non-Real Time 0xxxnnnn XN = When N is received N=0-F, whichever is received. X=ignored = Sub-ID #1 = General MIDI Message = Sub-ID #2 = General MIDI On F0 7E XN F E = Universal Non-Real Time 0xxxnnnn XN = When N is received N=0-F, whichever is received. X=ignored = Sub-ID #1 = General MIDI Message = Sub-ID #2 = General MIDI Off MIDI Formats [GM1] (*1) [GM1] (*1) *1 Changed to XG, and output. System Exclusive Messages (2) Application Range MIDI, Internal Sequencer Not Received when Receive Parameter SysEx is set to off. Not transmitted when Transmit Parameter SysEx is set to off. System Exclusive Messages (XG) MIDI Event XG Parameter Change XG Bulk Dump Data Format F0 43 1n 4C hh mm ll dd... F7 0001nnnn 1n = Device Number n=always 0 (when transmit), n=0-f (when receive) C = Model ID 0hhhhhhh hh = High 0mmmmmmm mm= Mid 0lllllll ll = Low 0ddddddd dd = Data F0 43 0n 4C aa bb hh mm ll dd... dd cc F7 0000nnnn 0n = Device Number n=always 0 (when transmit), n=0-f (when receive) C = Model ID 0aaaaaaa aa = Byte Count MSB 0bbbbbbb bb = Byte Count LSB 0hhhhhhh hh = High 0mmmmmmm mm= Mid 0lllllll ll = Low 0ddddddd dd = Data : : 0ddddddd dd = Data 0ccccccc cc = Checksum *Refer to Parameter Change Table. *Refer to Parameter Change Table. *Refer to Parameter Change Table. *Refer to Parameter Change Table. YDP-S34 MIDI Reference 12

13 MIDI Event XG Parameter Request XG Dump Request Data Format F0 43 3n 4C hh mm ll F7 0011nnnn 3n = Device Number n=always 0 (when transmit), n=0-f (when receive) C = Model ID 0hhhhhhh hh = High 0mmmmmmm mm= Mid 0lllllll ll = Low F0 43 2n 4C hh mm ll F7 0010nnnn 2n = Device Number n=always 0 (when transmit), n=0-f (when receive) C = Model ID 0hhhhhhh hh = High 0mmmmmmm mm= Mid 0lllllll ll = Low *Refer to Parameter Change Table. (However, the request for address 0A nn 4v will be ignored.) *Refer to Parameter Change Table. (However, the request for address 0A nn 40 will be ignored.) System Exclusive Messages (Others) MIDI Event MIDI Master Tuning Data Format F0 43 1n m 0l cc F7 0001nnnn 1n n= always 0 (when transmit), n=0-f (when receive) = Model ID of TG = High = Mid = Low 0000mmmm 0m = Master Tune MSB 0000llll 0l = Master Tune LSB 0ccccccc cc = don't care (effective or not for each part) (generated data) System Exclusive Messages (Preset Voice) MIDI Event String Resonance Depth Sustain Sample Depth Key Off Sampling Depth Data Format F n 02 dd F = Clavinova ID = Model ID (Clavinova common ID) = Sub-ID = Sub-ID 0000nnnn 0n = Channel (00-0F) = Sub-ID (String Resonance Depth) 0ddddddd dd = Depth (00-48) F n 03 dd F = Clavinova ID = Model ID (Clavinova common ID) = Sub-ID = Sub-ID 0000nnnn 0n = Channel (00-0F) = Sub-ID (Sustain Sample Depth) 0ddddddd dd = Depth (00-48) F n 04 dd F = Clavinova ID = Model ID (Clavinova common ID) = Sub-ID = Sub-ID 0000nnnn 0n = Channel (00-0F) = Sub-ID (Key Off Sampling Depth) 0ddddddd dd = Depth (00-50) (effective or not for each part) (generated data) Soft Pedal Depth F n 05 dd F = Clavinova ID = Model ID (Clavinova common ID) = Sub-ID = Sub-ID 0000nnnn 0n = Channel (00-0F) = Sub-ID (Soft Pedal Depth) 0ddddddd dd = Depth () * For each Depth value, the reset value is 40H = Voice parameter YDP-S34 MIDI Reference 13

14 Yamaha [Digital Piano] Date : 10-AUG-2017 Model YDP-S34 MIDI Implementation Chart Version : 1.0 MIDI Implementation Chart Function... Transmitted Recognized Remarks Basic Channel Default Changed Mode Default Messages Altered 3 ************** 3 Note Number : True voice ************** Velocity Note ON Note OFF 9nH,v= nH,v=64 9nH,v= nH,v=0 or 8nH After Touch Key's Ch's Pitch Bend * semi *1 Control Change 0,32 1,5 7, ,38 64,66, , *2 *2 *2 *2 *2 *2 *2 *2 *2 Bank Select Expression Data Entry Pedal Portamento Sound Controller Portamento Control Effect Depth RPN Inc,Dec NRPN LSB,MSB RPN LSB,MSB Prog Change : True # System Exclusive ************** ,1,4,5,6,11,16,19,48 Common : Pos. : Sel. : Tune System : Clock Real Time : Commands : All Sound Off Aux : Reset All Cntrls : Local ON/OFF Mes- : All Notes OFF sages: Active Sense : Reset Notes: (120,126,127) (121) (122) ( ) *1 For some Voices (such as Piano or Harpsichord Voices), the pitch may not be changed according to the pitch bend setting range. *2 These Control Change messages cannot be transmitted by panel operations, but can be transmitted by playback data. Mode 1 : OMNI ON, POLY Mode 3 : OMNI OFF, POLY Mode 2 : OMNI ON,MONO Mode 4 : OMNI OFF,MONO : Yes : No Manual Development Group 2018 Yamaha Corporation Published 03/2018 MW-A0