Lead Free. (Note 2) Note: 1. RoHS revision Glass and High Temperature Solder Exemptions Applied, see EU Directive Annex Notes 5 and 7.

Size: px
Start display at page:

Download "Lead Free. (Note 2) Note: 1. RoHS revision Glass and High Temperature Solder Exemptions Applied, see EU Directive Annex Notes 5 and 7."

Transcription

1 Features General Description Dual PWM control circuitry Operating voltage can be up to 50V Adjustable Dead Time Control (DTC) Under Voltage Lockout (UVLO) protection Short Circuit Protection (SCP) Variable oscillator frequency: 500KHz Max 2.5V voltage reference output SOP-16L package Lead Free Finish/RoHS Compliant for Lead Free products (Note 1) The AP2001 integrates Pulse-width-Modulation (PWM) control circuit into a single chip, mainly designed for power-supply regulator. All the functions included are an on-chip 2.5V reference output, two error amplifiers, an adjustable oscillator, two dead-time comparators, UVLO, SCP, DTC circuitry, and dual common-emitter (CE) output transistor circuit. Recommend the output CE transistors as pre-driver for Driving externally. The DTC can provide from 0% to 100%. Switching frequency can be adjustable by trimming RT and CT. During low V CC situation, the UVLO makes sure that the outputs are off until the internal circuit is operating normally. Applications Backlight inverter DC/DC converts in computers, etc. Ordering Information AP2001 X X X Package Lead Free Packing S: SOP-16L L : Lead Free Package - U : Tube (Note 2) - 13 : Taping Note: 1. RoHS revision Glass and High Temperature Solder Exemptions Applied, see EU Directive Annex Notes 5 and 7. Lead-free Device Package Code Packaging (Note 2) Tube Part Number Quantity Suffix Quantity 13 Tape and Reel Part Number Suffix AP2001S S SOP-16L 50 -U 2500/Tape & Reel -13 Note: 2. Pad layout as shown on Diodes Inc. suggested pad layout document AP02001, which can be found on our website at AP2001 Rev. 1 1 of 8 NOVEMBER 2006

2 Pin Assignments ( Top View ) CT REF SCP EA2 EA2- FB2 DTC2 OUT2 VCC RT EA1 EA1- FB1 DTC1 OUT1 GND SOP-16L Pin Descriptions Name CT RT EA EA - FB DTC OUT GND VCC SCP REF Description Timing Capacitor Timing Resistor Error Amplifier Input() Error Amplifier Input(-) Feedback Loop Compensation Dead Time Control Pre-driver Output Ground Supply Voltage Short Circuit Protection Voltage Reference AP2001 Rev. 1 2 of 8 NOVEMBER 2006

3 Block Diagram V CC SCP RT CT DTC1 REF Bandgap Reference Oscillator MAX.500KHz EA1 EA1 - Error Amplifier 1 170K VREF - PWM Amplifier 1 OUT1 FB1 EA2 EA2-1.18V - R S UVLO R - OUT2 Error Amplifier 2 PWM Amplifier 2 FB2 GND DTC2 Absolute Maximum Ratings Symbol Parameter Rating Unit V CC Supply Voltage 40 V V I Amplifier Input Voltage 20 V V O Collector Output Voltage 40 V Io Collector Output Current 21 ma T OP Operating Temperature Range -20 to 85 T ST Storage Temperature Range -65 to 150 T LEAD Lead Temperature 1.6 mm (1/16 inch) from Case for 5 Seconds 245 o C o C o C AP2001 Rev. 1 3 of 8 NOVEMBER 2006

4 Recommended Operating Conditions Symbol Parameter Min. Max. Unit V CC Supply Voltage V V I Amplifier Input Voltage V V O Collector Output Voltage 40 V I O Collector Output Current 20 ma I FB Current into Feedback Terminal 45 µa R F Feedback Resistor 100 kω C T Timing Capacitor pf R T Timing Resistor kω F OSC Oscillator Frequency KHz T OP Operating Free-air Temperature ºC Electrical Characteristics (T A = 25ºC, V CC = 6V, f = 200 KHz) Reference (REF) Output Voltage (pin 16) I O = 1mA V V O Output Voltage Change with T A = -20ºC ~ 25ºC -0.1 ±1 % Temperature T A = 25ºC ~ 85ºC -0.2 ±1 % V DLI Input Stability V CC = 3.6V ~ 40V mv V DLO Output Stability I O = 0.1 ma ~ 1mA mv I O Short-circuit Output Current V O = ma Under voltage lockout (UVLO) V UT Upper Threshold Voltage (V CC ) 2.65 V I V LWT Lower Threshold Voltage (V CC ) O(REF) = 0.1mA 2.45 V T A = 25ºC V HT Hysteresis (V CC ) mv AP2001 Rev. 1 4 of 8 NOVEMBER 2006

5 Electrical Characteristics ( Continued ) Short-circuit protection (SCP) control V IT Input Threshold Voltage T A = 25ºC V V STB Standby Voltage No pull up mv V LT Latched Input Voltage No pull up mv I SCP Input (Source) Current V I = 0.7V, T A = 25ºC µa V CT Comparator Threshold Voltage (FB) 1.18 V Oscillator (OSC) F OSC Frequency C T = 330 pf, R T = 10 KΩ 200 KHz Standard Deviation of Frequency C T = 330 pf, R T = 10 KΩ 10 Frequency Change with Voltage V CC = 3.6V ~ 40V 1 F OSC % T A = -20ºC ~ 25ºC -0.4 ± 2 Frequency Change with Temperature TA = 25ºC ~ 85ºC -0.2 ± 2 Dead-time control (DTC) I BDT Input Bias Current 1 I DT Latch Mode (Source) Current T A = 25ºC V DT Latched Input Voltage I O = 40µA 2.3 V T0 Zero duty cycle V Input Threshold Voltage at f= 10 KHz Maximum duty cycle V T100 Error-amplifier V IO Input Offset Voltage V O (FB) = 1.25V ±6 mv I IO Input Offset Current V O (FB) = 1.25V ±100 na I IB Input Bias Current V O (FB) = 1.25V na V CM 1.05 Common-mode Input Voltage V to Range CC = 3.6V ~ 40V 1.45 V AV Open-loop Voltage Amplification R F = 200 KΩ db GBW Unity-gain Bandwidth 1.5 MHz CMRR Common-mode Rejection Ratio db V OH Max. Output Voltage V ref -0.1 V V OL Min. Output Voltage 1 V I OI Output (Sink) Current (FB) V ID = -0.1V, V O = 1.25V ma I OO Output (Source) Current (FB) V ID = 0.1V, V O = 1.25V µa µa AP2001 Rev. 1 5 of 8 NOVEMBER 2006

6 Electrical Characteristics ( Continued ) Output section I LEAK Leakage Current V O = 40V 10 µa V SAT Output Saturation Voltage I O = 10 ma V I SC Short-circuit Output Current V O = 6V 90 ma PWM comparator V T0 Input Threshold Voltage at f = Zero duty cycle V V T KHz (FB) Maximum duty cycle V Total device I CCS Standby Supply Current Off-state ma I CCA Average Supply Current R T = 10 KΩ ma Typical Application Circuit V CC 200k L1 0.47uF 50k R1 R2 330pF R3 Boost Output C2 22k R4 V ref C1 500pF AP2001 Note: Values for R1 through R7, C1 through C4, and L1 and L2 depend upon individual application C5 R5 500 pf 220 1uF L2 Buck Output R6 470 R7 C4 Dual output DC/DC converter AP2001 Rev. 1 6 of 8 NOVEMBER 2006

7 Marking Information (1) SOP-16L ( Top View ) 16 9 Logo Part No. 1 AP2001 YY WW X X 8 ID code L: Lead Free Package Xth week: 01~52 Year: "01" = 2001 "02" = 2002 SOP-16L ~ AP2001 Rev. 1 7 of 8 NOVEMBER 2006

8 Package Information (1) Package Type: SOP-16L IMPORTANT NOTICE Diodes Incorporated and its subsidiaries reserve the right to make modifications, enhancements, improvements, corrections or other changes without further notice to any product herein. Diodes Incorporated does not assume any liability arising out of the application or use of any product described herein; neither does it convey any license under its patent rights, nor the rights of others. The user of products in such applications shall assume all risks of such use and will agree to hold Diodes Incorporated and all the companies whose products are represented on our website, harmless against all damages. LIFE SUPPORT Diodes Incorporated products are not authorized for use as critical components in life support devices or systems without the expressed written approval of the President of Diodes Incorporated. AP2001 Rev. 1 8 of 8 NOVEMBER 2006

AP1506. Package T5: TO220-5L L : K5: TO263-5L T5R: TO220-5L(R)

AP1506. Package T5: TO220-5L L : K5: TO263-5L T5R: TO220-5L(R) Features General Description oltage: 3.3, 5, 12 and Adjustable ersion Adjustable ersion oltage Range, 1.23 to 18+4% 150KHz +15% Fixed Switching Frequency oltage Mode Non-Synchronous PWM Control Thermal-Shutdown

More information

Package K5 : TO263-5L T5 : TO220-5L T5R : TO220-5L(R)

Package K5 : TO263-5L T5 : TO220-5L T5R : TO220-5L(R) Features General Description oltage: 3.3, 5, 12 and Adjustable ersion Adjustable ersion oltage Range, 1.23 to 18+4% 150KHz +15% Fixed Switching Frequency oltage Mode Non-Synchronous PWM Control Thermal-Shutdown

More information

Lead Free L : Lead Free. Package K5 : TO263-5L T5 : TO220-5L T5R : TO220-5L(R)

Lead Free L : Lead Free. Package K5 : TO263-5L T5 : TO220-5L T5R : TO220-5L(R) Features General Description Output voltage: 3.3, 5, 12 and adjustable output version Adjustable version output voltage range, 1.23 to 37+4% 150KHZ +15% fixed switching frequency oltage mode non-synchronous

More information

Dual Channel PWM Controller with SCP / DTC Function

Dual Channel PWM Controller with SCP / DTC Function Dual Channel PWM Controller with SCP / DTC Function General Description The FP545A is a dual channel PWM buck controller with short circuit protection (SCP) and adjustable maximum duty control (DTC) function.

More information

AP1506. Description. Pin Assignments. Features. Applications. 150kHz, 3A PWM BUCK DC/DC CONVERTER AP SD 4 FB 3 GND 2 Output

AP1506. Description. Pin Assignments. Features. Applications. 150kHz, 3A PWM BUCK DC/DC CONVERTER AP SD 4 FB 3 GND 2 Output 150kHz, 3A PWM BUCK DC/DC CONVERTER Description The series are monolithic IC designed for a step-down DC/DC converter, and own the ability of driving a 3A load without external transistor. Due to reducing

More information

AP1513 X X X. Lead-Free L : Lead-Free G : Green

AP1513 X X X. Lead-Free L : Lead-Free G : Green Features Input voltage: 3.6V to 18V Output voltage: 0.8V to V CC Duty ratio: 0% to 100% PWM control Oscillation frequency: 300KHz typ. Softstart, Current limit, Enable function Thermal Shutdown function

More information

UNISONIC TECHNOLOGIES CO., LTD TL594

UNISONIC TECHNOLOGIES CO., LTD TL594 UNISONIC TECHNOLOGIES CO., LTD TL594 PULSE-WIDTH-MODULATION CONTROL CIRCUIT DESCRIPTION The UTC TL594 is a PWM (Pulse Width Modulation) control circuit, incorporating two error amplifiers, an on-chip adjustable

More information

TL1451AC, TL1451AY DUAL PULSE-WIDTH-MODULATION CONTROL CIRCUITS

TL1451AC, TL1451AY DUAL PULSE-WIDTH-MODULATION CONTROL CIRCUITS SLVS4C FEBRUARY 983 REVISED OCTOBER 995 Complete PWM Power Control Circuitry Completely Synchronized Operation Internal Undervoltage Lockout Protection Wide Supply Voltage Range Internal Short-Circuit

More information

APX358/APX324 LOW VOLTAGE, RAIL-TO-RAIL INPUT AND OUTPUT DUAL/QUAD OPERATIONAL AMPLIFIERS

APX358/APX324 LOW VOLTAGE, RAIL-TO-RAIL INPUT AND OUTPUT DUAL/QUAD OPERATIONAL AMPLIFIERS Features General Description (For V + =5V and V - =0V typical unless otherwise noted) Guaranteed 2.7V and 5V performance Crossover distortion eliminated Operating temperature range (-40 C to +85 C) Gain-bandwidth

More information

Description. Q1 2 B240 Ipk Rsc V Ref Reg

Description. Q1 2 B240 Ipk Rsc V Ref Reg Features Description Operation from.0v to 0V Input Low Standby Current Current Limiting Output Current to.a Output Voltage Adjustable Frequency Operation to 00 khz Precision % Reference Lead Free packages:

More information

PULSE-WIDTH-MODULATION CONTROL CIRCUITS General Description. Features. Applications

PULSE-WIDTH-MODULATION CONTROL CIRCUITS General Description. Features. Applications General Description The is a voltage mode pulse width modulation switching regulator control circuit designed primarily for power supply control. The consists of a reference voltage circuit, two error

More information

UNISONIC TECHNOLOGIES CO., LTD

UNISONIC TECHNOLOGIES CO., LTD UNISONIC TECHNOLOGIES CO., LTD DUAL PULSE-WIDTH-MODULATION CONTROL CIRCUITS SOP-6 DESCRIPTION The UTC TL45 incorporates on a single monolithic chip all the functions required in the construction of two

More information

PULSE-WIDTH-MODULATION CONTROL CIRCUITS General Description. Features. Applications

PULSE-WIDTH-MODULATION CONTROL CIRCUITS General Description. Features. Applications General Description The is a voltage mode pulse width modulation switching regulator control circuit designed primarily for power supply control. The consists of a reference voltage circuit, two error

More information

TL594 PULSE-WIDTH-MODULATION CONTROL CIRCUITS

TL594 PULSE-WIDTH-MODULATION CONTROL CIRCUITS Complete PWM Power Control Circuitry Uncommitted Outputs for 200-mA Sink or Source Current Output Control Selects Single-Ended or Push-Pull Operation Internal Circuitry Prohibits Double Pulse at Either

More information

AP XX XXX X - X. G: Green. Lead Free/ Green. Quantity

AP XX XXX X - X. G: Green. Lead Free/ Green. Quantity Features Output voltage: 3.3, 5, 12 and adjustable output version Adjustable version output voltage range, 1.23 to 37+4% 150kHz +15% fixed switching frequency oltage mode non-synchronous PWM control Thermal-shutdown

More information

TL594C, TL594I, TL594Y PULSE-WIDTH-MODULATION CONTROL CIRCUITS

TL594C, TL594I, TL594Y PULSE-WIDTH-MODULATION CONTROL CIRCUITS Complete PWM Power Control Circuitry Uncommitted Outputs for 200-mA Sink or Source Current Output Control Selects Single-Ended or Push-Pull Operation Internal Circuitry Prohibits Double Pulse at Either

More information

Package Packaging. Lead Free G : Green

Package Packaging. Lead Free G : Green Features General Description Input voltage: 4.4 to 18 Output voltage: 0.8 to CC. Duty ratio: 0% to 99% PWM control Oscillation frequency: 300KHz typ. Current limit, Enable function Thermal Shutdown function

More information

TL494 Pulse - Width- Modulation Control Circuits

TL494 Pulse - Width- Modulation Control Circuits FEATURES Complete PWM Power Control Circuitry Uncommitted Outputs for 200 ma Sink or Source Current Output Control Selects Single-Ended or Push-Pull Operation Internal Circuitry Prohibits Double Pulse

More information

UNISONIC TECHNOLOGIES CO., LTD TL494

UNISONIC TECHNOLOGIES CO., LTD TL494 UNISONIC TECHNOLOGIES CO., LTD TL494 VOLTAGE MODE PWM CONTROL CIRCUIT DESCRIPTION The UTC TL494 incorporates all the functions required in the construction of a pulse-width modulation switching circuit.

More information

PD7500 Pulse-Width-Modulation Control Circuits

PD7500 Pulse-Width-Modulation Control Circuits PD7500 Pulse-Width-Modulation Control Circuits Description The PD7500 is a voltage mode pulse width modulation switching regulator control circuit designed primarily for power supply control. The PD7500

More information

UNISONIC TECHNOLOGIES CO., LTD

UNISONIC TECHNOLOGIES CO., LTD UNISONIC TECHNOLOGIES CO., LTD VOLTAGE MODE PWM CONTROL CIRCUIT DESCRIPTION The UTC TL494 incorporates all the functions required in the construction of a pulse-width modulation switching circuit. Designed

More information

PULSE-WIDTH-MODULATION CONTROL CIRCUITS General Description. Features. Applications

PULSE-WIDTH-MODULATION CONTROL CIRCUITS General Description. Features. Applications 查询 AZ7500BP 供应商 捷多邦, 专业 PCB 打样工厂,24 小时加急出货 General Description The is a voltage mode pulse width modulation switching regulator control circuit designed primarily for power supply control. The consists

More information

Pulse-Width-Modulation Control Circuits

Pulse-Width-Modulation Control Circuits Pulse-Width-Modulation Control Circuits Product Description The series incorporate on single monolithic chip all the functions required in the construction of a pulse-width-modulation control circuit.

More information

NJM2355 TWO OUTPUT HIGH VOLTAGE SWITCHING REGULATOR

NJM2355 TWO OUTPUT HIGH VOLTAGE SWITCHING REGULATOR TWO OUTPUT HIGH VOLTAGE SWITCHING REGULATOR NJM2355 GENERAL DESCRIPTION New JRC's high voltage switching regulator, NJM2355, is a monolithic high voltage (50V max) operation integrated circuit consisting

More information

TL 072 S G Green G : Green. TL072SG-13 S SOP-8L 2500/Tape & Reel -13

TL 072 S G Green G : Green. TL072SG-13 S SOP-8L 2500/Tape & Reel -13 Features General Description Low Power Consumption Wide Common-Mode and Differential Voltage Ranges Low Input Bias and Offset Currents Output Short-Circuit Protection Low Total Harmonic Distortion 0.003%

More information

PD494 Pulse-Width-Modulation Control Circuits

PD494 Pulse-Width-Modulation Control Circuits PD494 Pulse-Width-Modulation Control Circuits Description The PD494 is a voltage mode pulse-width-modulation switching regulator control circuit designed primarily for power supply control. The PD494 consists

More information

Advanced Power Electronics Corp. APE1707M-HF-3TB. 150kHz, 2A PWM Buck DC/DC Converter

Advanced Power Electronics Corp. APE1707M-HF-3TB. 150kHz, 2A PWM Buck DC/DC Converter 0kHz, A PWM Buck DC/DC Converter Features Output voltage: Fixed.V, V, V and adjustable output (.V to.v) versions. Fixed switching frequency, 0KHz ±%. Voltage mode non-synchronous PWM control. Thermal-shutdown

More information

UNISONIC TECHNOLOGIES CO., LTD

UNISONIC TECHNOLOGIES CO., LTD U UNISONIC TECHNOLOGIES CO., LTD REGULATING PWM IC DESCRIPTION The UTC U is a pulse width modulator IC and designed for switching power supplies application to improve performance and reduce external parts

More information

TL594 PULSE-WIDTH-MODULATION CONTROL CIRCUIT

TL594 PULSE-WIDTH-MODULATION CONTROL CIRCUIT Complete PWM Power Control Circuitry Uncommitted Outputs for 200-mA Sink or Source Current Output Control Selects Single-Ended or Push-Pull Operation Internal Circuitry Prohibits Double Pulse at Either

More information

AP8802. General Description. Features. Applications. Typical Application Circuit. 1A LED Step-down Converter. Figure 2: Typical Application Circuit

AP8802. General Description. Features. Applications. Typical Application Circuit. 1A LED Step-down Converter. Figure 2: Typical Application Circuit Features General Description LED driving current up to A High efficiency up to 9% Operating input voltage up to 4V High switching frequency up to 500kHz PWM/DC input for dimming control Built-in output

More information

TL494C, TL494I, TL494M, TL494Y PULSE-WIDTH-MODULATION CONTROL CIRCUITS

TL494C, TL494I, TL494M, TL494Y PULSE-WIDTH-MODULATION CONTROL CIRCUITS Complete PWM Power Control Circuitry Uncommitted Outputs for 00-mA Sink or Source Current Output Control Selects Single-Ended or Push-Pull Operation Internal Circuitry Prohibits Double Pulse at Either

More information

A P X X X. Lead Free L : Lead Free G : Green (Note 1)

A P X X X. Lead Free L : Lead Free G : Green (Note 1) Lead-free AP Features General Description.3V maximum dropout at full load current Fixed.V±% output voltage Fast transient response Output current limiting Built-in thermal shutdown Good noise rejection

More information

Lead-Free. Suffix 3000/Tape & Reel 3000/Tape & Reel 3000/Tape & Reel 3000/Tape & Reel 3000/Tape & Reel AP432(A) SOP-8L NA NA -7 NA NA NA NA

Lead-Free. Suffix 3000/Tape & Reel 3000/Tape & Reel 3000/Tape & Reel 3000/Tape & Reel 3000/Tape & Reel AP432(A) SOP-8L NA NA -7 NA NA NA NA Lead-free Lead-free Lead-free AP432/AP432A Features Precision reference voltage AP432 : 1.24V ± 1% AP432A : 1.24V ± 0.5% Sink current capability: 200mA Minimum cathode current for regulation: 150μA Equivalent

More information

Lead Free L : Lead Free (Note 1) G : Green (Note 2) Part Number

Lead Free L : Lead Free (Note 1) G : Green (Note 2) Part Number 5V OUTPUT 3-TERMINAL POSITIVE REGULATOR Features General Description 5.0V output voltage with tolerances of ±5% over the operating temperature ranges Output current in excess of 100mA Internal thermal

More information

TL494 PULSE-WIDTH-MODULATION CONTROL CIRCUITS

TL494 PULSE-WIDTH-MODULATION CONTROL CIRCUITS Complete PWM Power-Control Circuitry Uncommitted Outputs for 200-mA Sink or Source Current Output Control Selects Single-Ended or Push-Pull Operation Internal Circuitry Prohibits Double Pulse at Either

More information

AL8811. Description. Pin Assignments. Features. Applications. Typical Application Diagram. Boost/Buck/Inverting DC-DC CONVERTER AL8811

AL8811. Description. Pin Assignments. Features. Applications. Typical Application Diagram. Boost/Buck/Inverting DC-DC CONVERTER AL8811 Boost/Buck/Inverting DC-DC CONVERTER Description The is a monolithic control circuit containing the primary functions required for DC-to-DC converters. These devices consist of an internal temperature

More information

TL494M PULSE-WIDTH-MODULATION CONTROL CIRCUIT

TL494M PULSE-WIDTH-MODULATION CONTROL CIRCUIT Complete PWM Power Control Circuitry Uncommitted Outputs for 00-mA Sink or Source Current Output Control Selects Single-Ended or Push-Pull Operation Internal Circuitry Prohibits Double Pulse at Either

More information

Applications. Monitor TV STB Datacom

Applications. Monitor TV STB Datacom 18V, 3A SYNCHRONOUS DC-DC BUCK CONVERTER Description Pin Assignments The is a 500kHz fixed frequency, current mode, PWM synchronous buck (step-down) DC-DC converter, capable of driving a 3A load with high

More information

TL494 PULSE-WIDTH-MODULATION CONTROL CIRCUITS

TL494 PULSE-WIDTH-MODULATION CONTROL CIRCUITS Complete PWM Power-Control Circuitry Uncommitted Outputs for 200-mA Sink or Source Current Output Control Selects Single-Ended or Push-Pull Operation Internal Circuitry Prohibits Double Pulse at Either

More information

Lead Free. G : Green 50 : 5.0V. 13 Tape and Reel Package Packaging Part Number

Lead Free. G : Green 50 : 5.0V. 13 Tape and Reel Package Packaging Part Number AP7 Features.4V Maximum Dropout at Full Load Current Fast Transient Response Output Current Limiting Built-in Thermal Shutdown Good Noise Rejection 3-Terminal Adjustable or Fixed.5V,.8V,.5V, 3.3V, 5.V

More information

AP Khz, 3A PWM Buck DC/DC Converter. Features. General Description. Applications. Description. Pin Assignments

AP Khz, 3A PWM Buck DC/DC Converter. Features. General Description. Applications. Description. Pin Assignments Features - Output voltage: 3.3, 5, 12 and adjustable output version - Adjustable version output voltage range, 1.23 to 37+4% - 150Khz +15% fixed switching frequency - oltage mode non-synchronous PWM control

More information

Advanced Regulating Pulse Width Modulators

Advanced Regulating Pulse Width Modulators Advanced Regulating Pulse Width Modulators FEATURES Complete PWM Power Control Circuitry Uncommitted Outputs for Single-ended or Push-pull Applications Low Standby Current 8mA Typical Interchangeable with

More information

UNISONIC TECHNOLOGIES CO., LTD UC3842B/3843B

UNISONIC TECHNOLOGIES CO., LTD UC3842B/3843B UNISONIC TECHNOLOGIES CO., LTD UC3842B/3843B HIGH PERFORMANCE CURRENT MODE CONTROLLERS DESCRIPTION The UTC UC3842B/3843B are specifically designed for off-line and dc-to-dc converter applications offering

More information

Advanced Regulating Pulse Width Modulators

Advanced Regulating Pulse Width Modulators Advanced Regulating Pulse Width Modulators FEATURES Complete PWM Power Control Circuitry Uncommitted Outputs for Single-ended or Push-pull Applications Low Standby Current 8mA Typical Interchangeable with

More information

SN7500xP. Description. Package Type. Features. Application. Ordering Information SOP-16 DIP-16. Nov, 2011 REV. 00

SN7500xP. Description. Package Type. Features. Application. Ordering Information SOP-16 DIP-16. Nov, 2011 REV. 00 Pulse Width Modulation Description The SN7500 is a monolithic integrated circuit which includes all the necessary building blocks for the design of pulse width modulate(pwm) switching power supplies, including

More information

AP4310A. Pin Assignments. Description. Features. Applications. Typical Applications Circuit. A Product Line of. Diodes Incorporated

AP4310A. Pin Assignments. Description. Features. Applications. Typical Applications Circuit. A Product Line of. Diodes Incorporated DUAL OP AMP AND VOLTAGE REFERENCE Description The is a monolithic IC specifically designed to regulate the output current and voltage levels of switching battery chargers and power supplies Pin Assignments

More information

ABSOLUTE MAXIMUM RATINGS (Unless otherwise noted,all is over operating free air temperature Range) Characteristic Value Unit

ABSOLUTE MAXIMUM RATINGS (Unless otherwise noted,all is over operating free air temperature Range) Characteristic Value Unit HIGH FREQUENCY PWM CONTROLLER DESCRIPTION The is a high frequency PWM controller integrates required functions for boost conversion in a small SOP 8 package. A low 0.21V feedback voltage make the be an

More information

CURRENT MODE PWM CONTROLLER LM3842A/3A/4A/5A

CURRENT MODE PWM CONTROLLER LM3842A/3A/4A/5A CURRENT MODE PWM CONTROLLER LMA/A/A/5A FEATURES SOP/ DIP PIN Configulation Automatic feed forward compensation Optimized for offline converter Double pulse suppression Current mode operation to 500 KHz

More information

AP3409/A. Description. Pin Assignments. Features. Applications. A Product Line of. Diodes Incorporated

AP3409/A. Description. Pin Assignments. Features. Applications. A Product Line of. Diodes Incorporated 3A, 4MHz HIGH EFFICIENCY SYNCHRONOUS BUCK CONVERTER Description Pin Assignments The is a current mode, PWM synchronous buck DC/DC converter, capable of driving a 3A load with high efficiency, excellent

More information

OCP2030 SWITCHING BUCK REGULATOR

OCP2030 SWITCHING BUCK REGULATOR General Description The OCP2030 is a buck topology of switching regulator for wide operating voltage applications field. The OCP2030 includes a high current P-MOSFET, high precision reference (0.5V) for

More information

KA7500B. SMPS Controller. Features. Description. Internal Block Diagram.

KA7500B. SMPS Controller. Features. Description. Internal Block Diagram. SMPS Controller www.fairchildsemi.com Features Internal Regulator Provides a Stable 5V Reference Supply Trimmed to 5% Uncommitted Output TR for 200mA Sink or Source Current Output Control For Push-Pull

More information

KA7500C. SMPS Controller. Features. Description. Internal Block Diagram.

KA7500C. SMPS Controller. Features. Description. Internal Block Diagram. SMPS Controller www.fairchildsemi.com Features Internal regulator provides a stable 5V reference supply trimmed to ±1 % Accuracy. Uncommitted output TR for 200mA sink or source current Output control for

More information

AZV358. Pin Assignments. Description DATA SHEET. Applications. Features. Functional Block Diagram. A Product Line of. Diodes Incorporated

AZV358. Pin Assignments. Description DATA SHEET. Applications. Features. Functional Block Diagram. A Product Line of. Diodes Incorporated DUAL LOW VOLTAGE RAIL-TO-RAIL OUTPUT OPERATIONAL AMPLIFIERS Description Pin Assignments The is dual low voltage (2.7V to 5.5V) operational amplifiers which have rail-to-rail output swing capability. The

More information

AP8802. General Description. Features. Applications. Typical Application Circuit. 1A LED Step-down Converter. Figure 1: Typical Application Circuit

AP8802. General Description. Features. Applications. Typical Application Circuit. 1A LED Step-down Converter. Figure 1: Typical Application Circuit Features General Description LED driving current up to A High efficiency up to 92% Operating input voltage up to 48V High switching frequency up to 500kHz PWM/DC input for dimming control Built-in output

More information

AP5004 PWM CONTROL 2.5A STEP-DOWN CONVERTER. Description. Pin Assignments. Applications. Features AP5004 SOP-8L. (Top View ) EN FB Vboost Output

AP5004 PWM CONTROL 2.5A STEP-DOWN CONVERTER. Description. Pin Assignments. Applications. Features AP5004 SOP-8L. (Top View ) EN FB Vboost Output Description Pin Assignments The is a step-down switching regulator with PWM control and includes a reference voltage source, oscillation circuit, error amplifier, and an internal NMOS. (Top View ) provides

More information

Low-Voltage Switchmode Controller

Low-Voltage Switchmode Controller End of Life. Last Available Purchase Date is 31-Dec-2014 Si9145 Low-Voltage Switchmode Controller FEATURES 2.7-V to 7-V Input Operating Range Voltage-Mode PWM Control High-Speed, Source-Sink Output Drive

More information

Liteon Semiconductor Corporation LSP3601 Step-Up DC/DC Controller

Liteon Semiconductor Corporation LSP3601 Step-Up DC/DC Controller Liteon Semiconductor Corporation FEATURES Wide supply voltage operating range: 1.8 to 15V Reference voltage precision: 4% Low current consumption: Operation Mode 5.5mA Standby Mode: 1µA High speed oscillator

More information

PULSE-WIDTH-MODULATION CONTROL CIRCUITS General Description. Features

PULSE-WIDTH-MODULATION CONTROL CIRCUITS General Description. Features 查询 M 供应商 捷多邦, 专业 PCB 打样工厂,24 小时加急出货 General Description The incorporates on a single chip all the functions required in the construction of a pulse-widthmodulation (PWM) control circuit. Designed primarily

More information

AP1688. Description. Features NEW PRODUCT. Pin Assignments. Applications. Typical Applications Circuit. A Product Line of. Diodes Incorporated

AP1688. Description. Features NEW PRODUCT. Pin Assignments. Applications. Typical Applications Circuit. A Product Line of. Diodes Incorporated AC/DC, HIGH PF, HIGH EFFICIENCY, UNIVERSAL MAINS LED DRIVER CONTROLLER Description The is a high performance AC/DC PFC and constant current controller for universal mains LED driver applications. The device

More information

Pin Assignments. Description ADVANCED INFORMATION. Features. Applications. Schematic Diagram. ( Top View ) SOT25/SOT353

Pin Assignments. Description ADVANCED INFORMATION. Features. Applications. Schematic Diagram. ( Top View ) SOT25/SOT353 GENERAL PURPOSE LOW VOLTAGE COMPARATOR Description Pin Assignments The LMV331/LMV393 series are lowvoltage, (2.7V to 5.5V) single and dual comparators, which are designed to effectively reduce cost and

More information

FP5139. Technology BOOST CONVERT CONTROL IC GENERAL DESCRIPTION FEATURES TYPICAL APPLICATION

FP5139. Technology BOOST CONVERT CONTROL IC GENERAL DESCRIPTION FEATURES TYPICAL APPLICATION BOOST CONVERT CONTROL IC GENERAL DESCRIPTION The is a boost topology switching regulator control IC for battery-used applications field. The includes a totem-pole single output stage for driving NPN transistor

More information

Pulse-Width-Modulation Control Circuits

Pulse-Width-Modulation Control Circuits FEATURES Complete PWM Power Control Circuitry Uncommitted Outputs for 2 Ma Sink or Source Current Output Control Selects SingleEnded or PushPull Operation Error AMP 1 NONIN INPUT IN INPUT SOP16/DIP16 (TOP

More information

SG2525A SG3525A REGULATING PULSE WIDTH MODULATORS

SG2525A SG3525A REGULATING PULSE WIDTH MODULATORS SG2525A SG3525A REGULATING PULSE WIDTH MODULATORS 8 TO 35 V OPERATION 5.1 V REFERENCE TRIMMED TO ± 1 % 100 Hz TO 500 KHz OSCILLATOR RANGE SEPARATE OSCILLATOR SYNC TERMINAL ADJUSTABLE DEADTIME CONTROL INTERNAL

More information

Techcode TD8215. Step-up DC/DC Controller. General Description. Features. Applications. Pin Configurations DATASHEET TD8215 INV SCP VDD CTL

Techcode TD8215. Step-up DC/DC Controller. General Description. Features. Applications. Pin Configurations DATASHEET TD8215 INV SCP VDD CTL General Description Features The is a single PWM, step up DC DC controller with low operating voltage application integrating softstart and short circuit detection function. The oscillator switching frequency

More information

Pulse-Width-Modulation Control Circuits

Pulse-Width-Modulation Control Circuits FEATURES Complete PWM Power Control Circuitry Uncommitted Outputs for 200 Sink or Source Current Output Control Selects SingleEnded or PushPull Operation Internal Circuitry Prohibits Double Pulse at Either

More information

AP 3152 F G - 7. Green G : Green. 7 Tape and Reel Device Package Code (Note 2) AP3152FG-7 F DFN /Tape & Reel -7.

AP 3152 F G - 7. Green G : Green. 7 Tape and Reel Device Package Code (Note 2) AP3152FG-7 F DFN /Tape & Reel -7. Features General Description Up to 88% Max power efficiency Wide input voltage range: 2.7V ~ 5.5V 1x, 1.5x, and 2x charge-pump modes Drive up to 4 white LEDs Default maximum current setting: 20mA each

More information

Non-Synchronous PWM Boost Controller

Non-Synchronous PWM Boost Controller Non-Synchronous PWM Boost Controller FP58 General Description The FP58 is a boost switching regulator controller IC for battery-used applications. The FP58 includes a totem-pole output stage for driving

More information

ATS137. General Description. Features. Applications. Typical Application Circuit 3.5V ~20V ATS137 SINGLE HALL EFFECT SWITCH. V cc. Digital Output GND

ATS137. General Description. Features. Applications. Typical Application Circuit 3.5V ~20V ATS137 SINGLE HALL EFFECT SWITCH. V cc. Digital Output GND Features General Description 3.5V to 20V DC Operation Voltage Temperature Compensation Wide Operating Voltage Range Open-Collector Pre-Driver 25mA Maximum Sinking Output Current Reverse Polarity Protection

More information

AP5727. General Description. Features. Applications. Typical Application Circuit. Bias Power Supply For OLED Sub Display and TFT-LCD V OUT.

AP5727. General Description. Features. Applications. Typical Application Circuit. Bias Power Supply For OLED Sub Display and TFT-LCD V OUT. Features General Description 30V High Output Voltage Fast 1.2MHz Switching Frequency Current limit and UVLO Protections Internal Thermal Shutdown Maximum 1µA Shutdown Current Integrated Soft-start Function

More information

Current-mode PWM controller

Current-mode PWM controller DESCRIPTION The is available in an 8-Pin mini-dip the necessary features to implement off-line, fixed-frequency current-mode control schemes with a minimal external parts count. This technique results

More information

AP7217 AP mA CMOS LDO. Pin Assignments. Description. Applications. Features. Typical Application Circuit. ( Top View ) AP7217 SOP-8L U1 2

AP7217 AP mA CMOS LDO. Pin Assignments. Description. Applications. Features. Typical Application Circuit. ( Top View ) AP7217 SOP-8L U1 2 Description Pin Assignments The low-dropout linear regulator operates from a 3.3V to 5.5V supply and delivers a guaranteed 500mA (min) continuous load current. The high-accuracy output voltage is preset

More information

AH X G - X - A. Tube/Bulk 7 Tape and Reel Ammo Box Part Part Number Suffix Suffix

AH X G - X - A. Tube/Bulk 7 Tape and Reel Ammo Box Part Part Number Suffix Suffix Features General Description Bipolar Hall Effect Latch Sensor 3.5V to 20V DC Operation Voltage Open Collector Pre-Driver 50mA Output Sink Current Chip Power Reverse-Connection Protection Operating Temperature:

More information

AP8802 1A LED STEP-DOWN CONVERTER. Pin Assignments. Description. Applications. Features. Typical Application Circuit AP8802

AP8802 1A LED STEP-DOWN CONVERTER. Pin Assignments. Description. Applications. Features. Typical Application Circuit AP8802 Description The is a step-down DC/DC converter designed to drive LEDs with a constant current. The device can drive up to thirteen LEDs, depending on the forward voltage of the LEDs, in series from a voltage

More information

AL5814. Description. Pin Assignments. Applications NEW PRODUCT. Features 60V LINEAR DIMMABLE LED CONTROLLER AL5814 VCC SFAULT OUT 7 EP 3 6 REF

AL5814. Description. Pin Assignments. Applications NEW PRODUCT. Features 60V LINEAR DIMMABLE LED CONTROLLER AL5814 VCC SFAULT OUT 7 EP 3 6 REF Description 60V LINEAR DIMMABLE LED CONTROLLER Pin Assignments The is an 8-terminal adjustable linear LED driver-controller offering excellent temperature stability and output current capability. It works

More information

Not Recommended for New Design

Not Recommended for New Design Features - voltage:. and adjustable output version - Adjustable version output voltage range, 1.2 to 18+4% - 150KHz +15% fixed switching frequency - oltage mode non-synchronous PWM control - Thermal-shutdown

More information

Advanced Regulating Pulse Width Modulators

Advanced Regulating Pulse Width Modulators Advanced Regulating Pulse Width Modulators FEATURES Complete PWM Power Control Circuitry Uncommitted Outputs for Single-ended or Push-pull Applications Low Standby Current 8mA Typical Interchangeable with

More information

AL5816Q. Description. Pin Assignments. Applications. Features VCC PWM GND AUTOMOTIVE COMPLIANT 60V LINEAR LED CONTROLLER AL5816Q

AL5816Q. Description. Pin Assignments. Applications. Features VCC PWM GND AUTOMOTIVE COMPLIANT 60V LINEAR LED CONTROLLER AL5816Q AUTOMOTIVE COMPLIANT 60V LINEAR LED CONTROLLER Description Pin Assignments The is a 5-terminal adjustable constant current linear LED controller offering excellent temperature stability and current (Top

More information

High Speed PWM Controller

High Speed PWM Controller High Speed PWM Controller application INFO available FEATURES Compatible with Voltage or Current Mode Topologies Practical Operation Switching Frequencies to 1MHz 50ns Propagation Delay to Output High

More information

Obsolete Product(s) - Obsolete Product(s)

Obsolete Product(s) - Obsolete Product(s) Low power quad operational amplifier Features Wide gain bandwidth: 1.3 MHz Extended temperature range: -40 C to +150 C Input common-mode voltage range includes negative rail Large voltage gain: 100 db

More information

AP1117. General Description. Features. Applications. Typical Application Circuit. Note: R 1A LOW DROPOUT POSITIVE ADJUSTABLE OR FIXED-MODE REGULATOR

AP1117. General Description. Features. Applications. Typical Application Circuit. Note: R 1A LOW DROPOUT POSITIVE ADJUSTABLE OR FIXED-MODE REGULATOR AP7 Features General Description.4V Maximum Dropout at Full Load Current Fast Transient Response Output Current Limiting Built-in Thermal Shutdown Good Noise Rejection 3-Terminal Adjustable or Fixed.5V,.8V,.5V,

More information

UNISONIC TECHNOLOGIES CO., LTD

UNISONIC TECHNOLOGIES CO., LTD UNISONIC TECHNOLOGIES CO., LTD CURRENT MODE PWM CONTROL CIRCUITS DESCRIPTION The UTC UC3842A/3843A provide the necessary functions to implement off-line or DC to DC fixed frequency current mode, controlled

More information

Current Mode PWM Controller

Current Mode PWM Controller Current Mode PWM Controller FEATURES Automatic Feed Forward Compensation Programmable Pulse-by-Pulse Current Limiting Automatic Symmetry Correction in Push-pull Configuration Enhanced Load Response Characteristics

More information

AH175 HALL EFFECT LATCH FOR HIGH TEMPERATURE. Description. Pin Assignments. Features Applications. Typical Application Circuit.

AH175 HALL EFFECT LATCH FOR HIGH TEMPERATURE. Description. Pin Assignments. Features Applications. Typical Application Circuit. Description Pin Assignments is a single-digital-output Hall-Effect latch sensor for high temperature operation. The device includes an on-chip Hall voltage generator for magnetic sensing, an amplifier

More information

ML4818 Phase Modulation/Soft Switching Controller

ML4818 Phase Modulation/Soft Switching Controller Phase Modulation/Soft Switching Controller www.fairchildsemi.com Features Full bridge phase modulation zero voltage switching circuit with programmable ZV transition times Constant frequency operation

More information

High Speed PWM Controller

High Speed PWM Controller High Speed PWM Controller FEATURES Compatible with Voltage or Current Mode Topologies Practical Operation Switching Frequencies to 1MHz 50ns Propagation Delay to Output High Current Dual Totem Pole Outputs

More information

ANP012. Contents. Application Note AP2004 Buck Controller

ANP012. Contents. Application Note AP2004 Buck Controller Contents 1. AP004 Specifications 1.1 Features 1. General Description 1. Pin Assignments 1.4 Pin Descriptions 1.5 Block Diagram 1.6 Absolute Maximum Ratings. Hardware.1 Introduction. Typical Application.

More information

APX 8 XX - XX XX G - 7. Package Packaging SA : SOT23

APX 8 XX - XX XX G - 7. Package Packaging SA : SOT23 Features Precision Monitoring of +2.5V, +3V, +3.3V, and +5V Power-Supply Voltages Fully Specified Over Temperature Available in three Output Configurations Push-Pull Active Low (APX809) Push-Pull Active

More information

Is Now Part of To learn more about ON Semiconductor, please visit our website at

Is Now Part of To learn more about ON Semiconductor, please visit our website at Is Now Part of To learn more about ON Semiconductor, please visit our website at www.onsemi.com ON Semiconductor and the ON Semiconductor logo are trademarks of Semiconductor Components Industries, LLC

More information

UNISONIC TECHNOLOGIES CO., LTD L2800

UNISONIC TECHNOLOGIES CO., LTD L2800 UNISONIC TECHNOLOGIES CO., LTD L2800 SWITCHING REGULATOR CONTROLLER(LOW VOLTAGE) DESCRIPTION The UTC L2800 which is incorporating a soft start function and short circuit detection function is a singlechannel

More information

(Top View) MSOP-8 packages, the AS358A is available in DIP-8 and SOIC-8 packages and AS358B is available in TSSOP-8 package.

(Top View) MSOP-8 packages, the AS358A is available in DIP-8 and SOIC-8 packages and AS358B is available in TSSOP-8 package. LOW POWER DUAL OPERATIONAL AMPLIFIERS Description Pin Assignments The consists of two independent, high gain and (Top View) internally frequency compensated operational amplifiers, they are specifically

More information

NOT RECOMMENDED FOR NEW DESIGN. Application

NOT RECOMMENDED FOR NEW DESIGN. Application Description Pin Assignments The consists of two independent precision voltage comparators with an offset voltage specification as low as 2.mV max for two comparators which were designed specifically to

More information

Description. Eco Status. KA7500C 16-Lead Dual Inline Package (DIP) Tube. -25 to +85 C RoHS 16-Lead Small Outline Package (SOP)

Description. Eco Status. KA7500C 16-Lead Dual Inline Package (DIP) Tube. -25 to +85 C RoHS 16-Lead Small Outline Package (SOP) KA7500C SMPS Controller Features Internal Regulator Provides a Stable 5V Reference Supply Trimmed to ±1% Accuracy Uncommitted Output TR for 200mA Sink or Source Current Output Control for Push-Pull or

More information

High Speed PWM Controller

High Speed PWM Controller High Speed PWM Controller FEATURES Compatible with Voltage or Current Mode Topologies Practical Operation Switching Frequencies to 1MHz 50ns Propagation Delay to Output High Current Dual Totem Pole Outputs

More information

AS339/339A. Description. Pin Assignments. Features. Applications LOW POWER LOW OFFSET VOLTAGE QUAD COMPARATORS AS339/339A

AS339/339A. Description. Pin Assignments. Features. Applications LOW POWER LOW OFFSET VOLTAGE QUAD COMPARATORS AS339/339A LOW POWER LOW OFFSET VOLTAGE QUAD COMPARATORS Description Pin Assignments The consist of four independent precision voltage comparators with a typical offset voltage of 2.0mV and high gain. They are specifically

More information

Features. 5V Reference UVLO. Oscillator S R GND*(AGND) 5 (9) ISNS 3 (5)

Features. 5V Reference UVLO. Oscillator S R GND*(AGND) 5 (9) ISNS 3 (5) MIC38HC42/3/4/5 BiCMOS 1A Current-Mode PWM Controllers General Description The MIC38HC4x family are fixed frequency current-mode PWM controllers with 1A drive current capability. Micrel s BiCMOS devices

More information

UNISONIC TECHNOLOGIES CO., LTD

UNISONIC TECHNOLOGIES CO., LTD UNISONIC TECHNOLOGIES CO., LTD HIGH PERFORMANCE CURRENT MODE PWM CONTROLLERS DESCRIPTION The UTC UC3844/3845 are high performance fixed frequency current mode controllers that specifically designed for

More information

AS393/393A. Description. Pin Assignments. Features. Applications. Typical Applications Circuit LOW POWER LOW OFFSET VOLTAGE DUAL COMPARATORS

AS393/393A. Description. Pin Assignments. Features. Applications. Typical Applications Circuit LOW POWER LOW OFFSET VOLTAGE DUAL COMPARATORS LOW POWER LOW OFFSET VOLTAGE DUAL COMPARATORS Description Pin Assignments The consist of two independent precision voltage comparators with a typical offset voltage of 1.0mV and high gain. They are specifically

More information

CURRENT-MODE PWM CONTROLLERS FEATURES ORDERING INFORMATION BLOCK DIAGRAM

CURRENT-MODE PWM CONTROLLERS FEATURES ORDERING INFORMATION BLOCK DIAGRAM CURRENT-MODE PWM CONTROLLERS The KA3842B/3B/4B/5B are fixed frequency current-mode PWM controller. They are specially designed for Off - Line and DC-to-DC converter applications with minimal external components.

More information

AP432/AP432A. General Description. Features. Typical Application Circuit ADJUSTABLE PRECISION SHUNT REGULATOR V IN V OUT. C out.

AP432/AP432A. General Description. Features. Typical Application Circuit ADJUSTABLE PRECISION SHUNT REGULATOR V IN V OUT. C out. Features General Description Precision reference voltage AP432 : 1.24V ± 1% AP432A : 1.24V ± 0.5% Sink current capability: 200mA Minimum cathode current for regulation: 150μA Equivalent full-range temp

More information

Advanced Monolithic Systems

Advanced Monolithic Systems Advanced Monolithic Systems FEATURES Internal Power Switch Output Voltage up to 20V Up to 89% Efficiency Low 0.08µA Shutdown Supply Current Internal Current Limit Thermal Shutdown Available in 5-Pin SOT-23

More information