TOSVERT TM VF-nC3 Parameter List

Size: px
Start display at page:

Download "TOSVERT TM VF-nC3 Parameter List"

Transcription

1 TOSVERT TM VF-nC Parameter List E Setting information * Please fill it in if necessary. Item Content Item Content Setting date / person Customer Application Application model Motor manufacturer / model Motor rated Inverter model / quantity VFnC Inverter serial number Optional devices Peripheral devices Control terminal F, R, S, S, CC, P5, VI, FM, P4, OUT, NO, FLA, FLB, FLC Main terminal / switch R/L, S/L, T/L, U/T, V/T, W/T, E/G, PA/+, PC/- Note) Please mark the terminal symbol that you connect. Basic parameters User parameters Oeration frequency of -. operation panel Four navigation functions History function Displays parameters in groups of five in the reverse order to that in which their s were changed. * (Possible to edit) Guidance function : - : - : Preset speed guidance : Analog signal operation guidance 4: Motor / switching operation guidance 5: Motor constant guidance Automatic acceleration/ deceleration Torque boost macro function Basic parameters : Disabled (manual ) : Automatic : Automatic (only at acceleration) : Disabled : Automatic torque boost + auto-tuning : Vector control + auto-tuning : Energy saving + auto-tuning Command mode : Terminal board : Panel keypad (including remote keypad) : RS485 communication Frequency mode : Terminal board VI : Setting dial (press in center to save) : Setting dial (save even if power is off) : RS485 communication 4: - 5: UP/DOWN from external logic input Meter :Output frequency :Output current :Frequency reference :Input voltage (DC detection) 4:Output voltage (command value) 5 to : - :Frequency value (after compensation) :VI input value 4:- 5:Fixed output (output current % 6:Fixed output (output current 5% 7: Fixed output (Other than the output current) 8: RS-485 communications data 9:For adjustments ( set value is displayed.) to : - - Meter adjustment gain Forward/reverse run : Forward run : Reverse run (Panel keypad) : Forward run (F/R switching on remote keypad) : Reverse run (F/R switching on remote keypad) Acceleration time.-. Deceleration time.-. Maximum frequency.-4. s Upper limit frequency.5- s Lower limit frequency.-. Base frequency.-4. s Base frequency voltage V/F control mode 5- s : V/F constant : Variable torque : Automatic torque boost control : Vector control 4: Energy-saving Torque boost value.-. depending Motor electronic-thermal protection level - Electronic-thermal Overload Setting OL stall protection protection characteristic valid invalid Stand valid valid ard motor invalid invalid invalid valid 4 valid invalid 5 VF valid valid 6 motor invalid invalid 7 invalid valid frequency frequency frequency frequency 4 frequency 5 frequency 6 frequency

2 : - : 5Hz default : 6Hz default : (Initialization) 4: Trip record clear 5: Cumulative operation time clear 6: Initialization of type information 7: Save user parameters 8. Load user parameters 9. Cumulative fan operation time record clears to : - : (Complete initialization) Checking the region Registered parameters display : Start : Japan (read only) : North America (read only) : Asia (read only) 4: Europe (read only) : Standard mode at power on : Easy mode at power on : Easy mode only set up s Extended parameter starting at Extended parameter starting at Extended parameter starting at Extended parameter starting at 4 Extended parameter starting at 5 Extended parameter starting at 6 Extended parameter starting at 7 Extended parameter starting at 8 Automatic edit function Extended parameters Input/output parameters Low-speed signal output.-. Frequency Speed reach.-. frequency Speed reach.-.5 detection band Priority : Reverse (Both F and R are ON) : Slowdown Stop Always active function - (No function) Analog/logic input Selection (VI terminal) : Voltage signal input (-V) : Current signal input (4-mA) : Logic input : Voltage signal input (-5V) - 6 (ST) (SS) - (SS) Always active function Input terminal A Input terminal A Input terminal A (S) Input terminal 4A (S) Input terminal 5 (VI) (SS) Sink/source switching : Sink, : Source -99, -55: invalid Output terminal A (OUT) Output terminal (FL) Output terminal B (OUT) s (LOW) -55 (FL) (always ON) : and : or Output terminal logic (OUT) Factory specific coefficient A Input terminal B - Input terminal B - Input terminal B - (S) Input terminal 4B - (S) Input terminal C - Input terminal C - Base frequency.-4. s Base frequency voltage 5- s E Torque boost value.-. Parameter values vary depending. Motor electronic-thermal - protection level Stall prevention level -99, (disabled) 5 Frequency parameters VI Setting of input point - Frequency of VI input point.-4.. Setting of VI input point - Frequency of VI input point.-4. s Analog input filter 4-64 Starting frequency.-..5 Operation starting.-. frequency Operation starting frequency hysteresis.-. Factory specific coefficient A DC braking starting.-. frequency DC braking current - 5 DC braking time Time limit for lower-limit : Disabled. frequency operation.-6. External logic input - UP.-.. response time External logic input - UP.-. frequency steps External logic input -DOWN.-.. response time External logic input -DOWN.-. frequency steps Initial value of UP/DOWN. frequency Change of the initial value : Not changed of UP/DOWN frequency : Setting of changed when power is turned off Jump frequency.-. Jumping width.-.. frequency 8 -. frequency 9 -. frequency -. frequency -. frequency -. frequency -. frequency 4 -. frequency 5 -. Operation mode parameters PWM carrier frequency -6 Auto-restart control Regenerative power ride-through control (Deceleration stop) Retry (number of times) Over voltage limit operation (Slowdown stop mode ) Supply voltage correction (output voltage limitation) : Disabled : At auto-restart after momentary stop : At ST terminal off and on : + 4: At start-up : Disabled : Automatic : Slowdown stop : Disabled - : Enabled : Disabled : Enabled (Quick deceleration control) : Enabled (Dynamic quick deceleration control) : Supply voltage uncorrected, output voltage limited : Supply voltage corrected, output voltage limited : Supply voltage uncorrected, output voltage unlimited : Supply voltage corrected, output voltage unlimited s s Reverse-run prohibition : Forward/reverse run permitted : Reverse run prohibited : Forward run prohibited Random mode : Disabled : Automatic Carrier frequency control : Carrier frequency without mode reduction : Carrier frequency with automatic reduction PID control waiting time -4 PID control : Disabled, : Enabled Proportional gain.-.. Integral gain.-..

3 Differential gain.-.5. Torque boost parameters Auto-tuning :Auto-tuning disabled :Initialization of (reset to ) :Auto-tuning executed (after execution:) Slip frequency gain -5 5 Automatic torque boost value.-. depending Motor rated.-5.5 depending Motor specific coefficient Motor rated current.-. depending Motor no-load current -9 depending Rated motor speed - s Motor specific coefficient Load inertia moment ratio.-.. Motor specific coefficient Motor specific coefficient 4 Motor specific coefficient 5 Motor specific coefficient 6 Input/output parameters VI input bias VI input gain Torque boost parameters Motor specific coefficient 7 Motor specific coefficient 8 Motor specific coefficient 9 Acceleration/deceleration time parameters Acceleration time.-. Deceleration time.-. Acceleration/deceleration pattern Acceleration/deceleration pattern Acceleration/deceleration and switching frequency Protection parameters : Linear : S-pattern : S-pattern. (disabled).- Stall prevention level -99, (disabled) Inverter trip retention : Cleared with power off : Retained with power off Emergency stop : Coast stop : Slowdown stop : Emergency DC braking Output phase failure detection. 5 : Disabled : At start-up (only one time after power on) : At start-up (each time) -4 Motor 5% overload detection time Input phase failure : Disabled, : Enabled detection Small current detection - hysteresis Small current trip/alarm : Alarm only : Tripping Small current detection -5 current Small current detection time -55 PID forward/reverse characteristics Auto-stop hysteresis in case of lower-limit frequency continuous operation Detection of output short-circuit at start-up Over-torque trip/alarm : Forward : Reverse.-ul. : Each time (standard pulse) : Only one time after power on(standard pulse) : Each time (short pulse) : Only one time after power on(short pulse) : Alarm only : Tripping Over-torque detection level (disabled) 5 - Over-torque detection time.-..5 Over-torque detection - hysteresis Cooling fan ON/OFF control : ON/OFF control : Always ON Cumulative operation time alarm Output parameters Logic output/pulse train : Logic output output (OUT-NO) : Pulse train output Pulse train output function :Output frequency (OUT-NO) :Output current :Frequency reference :Input voltage (DC detection) 4:Output voltage (command value) 5-: - :Frequency value (after compensation) :VI input value 4:- 5:Fixed output (output current % 6:Fixed output (output current 5% 7:Fixed output (Other than the output current) 8:Communication data 9 to : - Maximum numbers of pulse train Factory specific coefficient 6B Analog output signal : Meter option ( to ma) : Current ( to ma) output : Voltage ( to V) output Factory specific coefficient 6C Inclination characteristic of : Negative inclination analog output (downward slope) : Positive inclination (upward slope) Analog output bias Undervoltage trip/alarm Factory specific coefficient 6A Electronic thermal memory : Disabled VI analog input break detection level Annual average ambient Temperature (parts replacement alarms) Factory specific coefficient 6D : Alarm only (detection level below 64%) : Tripping (detection level below 64%) : Alarm only (detection level 5% or below, AC reactor required) : Enabled : Disabled, - : - to + C : - C : - C 4: -4 C 5: 4-5 C 6: 5-6 C E658664

4 Operation panel parameters Parameter write protection Current/voltage unit : Permitted : Panel and extension panel inhibited : + RS-485 communications inhibited : % : A (ampere)/v (volt) Free unit display scale.: Disabled (display of frequency).-. Free step (-step rotation of dial) Initial panel display.: Disabled.- : Operation frequency : Output current (%/A) : Frequency value to 7: - 8: Arbitrary display according to communications : Operation frequency : Output current (%/A) : Frequency value : Input voltage (DC detection) (%/V) 4: Output voltage (command value) (%/V) 5: Input power (kw) 6: Output power (kw) 7: Torque (%) 8: Torque current (%/A) 9 to : - : Frequency value (after compensation) to : - : PID feedback value 4 to 6: - 7: Drive load factor (%) : Operation frequency : Output current (%/A) : Frequency value to 7: - 8: Arbitrary display according to communications : Permitted : Prohibited : Permitted : Prohibited Status monitor Status monitor Status monitor Status monitor 4 4 Status monitor 5 7 Status monitor 6 Initial remote keypad display Panel frequency prohibition ( ) Local/remote operation prohibition for remote keypad Panel operation prohibition : Permitted (RUN/STOP keys) : Prohibited Prohibition of panel : Permitted emergency stop operation : Prohibited Prohibition of panel reset : Permitted operation : Prohibited / change : Permitted prohibition during operation : Prohibited Password () : No password set -8 9: Password set Password examination : No password set -8 9: Password set Factory specific coefficient 7A Easy mode - parameter Easy mode (Set by communications number) 4 parameter Easy mode 9 parameter Easy mode parameter 4 Easy mode 6 parameter 5 Easy mode 6 parameter 6 Easy mode parameter 7 Easy mode parameter 8 Easy mode parameter 9 Easy mode parameter Easy mode parameter Easy mode parameter Easy mode parameter Easy mode parameter 4 Easy mode parameter 5 Easy mode parameter 6 Easy mode parameter 7 Easy mode parameter 8 Easy mode parameter 9 Easy mode parameter Easy mode parameter Easy mode parameter.. Easy mode parameter Easy mode parameter 4 Factory specific coefficient 7B Communication parameters - (Set by communications Baud rate : 96bps 4: 9bps 5: 84bps Parity : NON (No parity) : EVEN (Even parity) : ODD (Odd parity) E Inverter number -47 Communication time-out -: Disabled,. time.-. Communication : Alarm only time-out action : Trip (Coast stop) : Trip (Slowdown stop) Communication time-out : Always detection condition : When or communications is selected : + during operation Selection of communication : Toshiba inverter protocol protocol : Modbus RTU protocol Block write data : No Block write data : Command information : - : Frequency 4: Output data terminal board 5: Analog output for communications Block read data : No Block read data : Status information : Output frequency : Output current Block read data 4: Output voltage 5: Alarm information Block read data 4 6: PID feedback value 7: Input terminal board monitor Block read data 5 8: Output terminal board monitor 9: V terminal block monitor Free s

5 Input Terminal Function Function No. Function, No function Forward run command Inversion of forward run command 4 Reverse run command 5 Inversion of reverse run command 6 Standby 7 Inversion of standby 8 Reset command 9 Inversion of reset command command Inversion of preset-speed command command Inversion of preset-speed command 4 command 5 Inversion of preset-speed command 6 command 4 7 Inversion of preset-speed command 4 8 Jog run mode 9 Inversion of jog run mode Emergency stop by external signal Inversion of emergency stop by external signal DC braking command Inversion of DC braking command 4 nd acceleration/deceleration 5 Inversion of nd acceleration/deceleration 8 nd V/F control mode switching 9 Inversion of nd V/F control switching nd stall prevention level Inversion of nd stall prevention level 6 PID control prohibition 7 Inversion of PID control prohibition 48 Forced local from communication 49 Inversion of forced local from communication 5 Operation hold (hold of -wire operation) 5 Inversion of operation hold (hold of -wire operation) 5 PID integral/differential clear 5 Inversion of PID integral/differential clear 54 PID characteristics switching 55 Inversion of PID characteristics switching 88 Frequency UP from external logic input 89 Inversion of frequency UP from external logic input 9 Frequency DOWN from external logic input 9 Inversion of frequency DOWN from external logic input 9 Clear frequency UP/DOWN from external logic input 9 Inversion of clear frequency UP/DOWN from external logic input 96 Coast stop command 97 Inversion of coast stop command 6 Frequency mode terminal board VI 7 Inversion of frequency mode terminal board VI block 8 Command mode terminal board 9 Inversion of command mode terminal board Parameter editing permission Inversion of parameter editing permission Forced deceleration command Inversion of forced deceleration command Parameter editing prohibition Inversion of parameter editing prohibition Output Terminal Function E Function No. Function Frequency lower limit Inversion of frequency lower limit Frequency upper limit Inversion of frequency upper limit 4 Low-speed detection signal 5 Inversion of low-speed detection signal 6 Output frequency attainment signal (acceleration/deceleration completed) 7 Inversion of output frequency attainment signal (inversion of acceleration/deceleration completed) 8 Set frequency attainment signal 9 Inversion of set frequency attainment signal Fault signal (trip output) Inversion of fault signal (inversion of trip output) 4 Over-current pre-alarm 5 Inversion of over-current pre-alarm 6 Overload detection pre-alarm 7 Inversion overload pre-alarm Overheat pre-alarm Inversion of overheat pre-alarm Overvoltage pre-alarm Inversion of overvoltage pre-alarm 4 Power circuit undervoltage detection 5 Inversion of power circuit undervoltage detection 6 Small current detection 7 Inversion of small current detection 8 Over-torque detection 9 Inversion of over-torque detection 4 Run 4 Inversion of run/stop 56 Cumulative operation time alarm 57 Inversion of cumulative operation time alarm 6 Forward/reverse run 6 Inversion of forward/reverse run 78 RS485 communication error 79 Inversion of RS485 communication error 9 Assigned data output 9 Inversion of assigned data output 8 Parts replacement alarm 9 Inversion of parts replacement alarm 46 Fault signal (output also at a retry) 47 Inversion of fault signal (output also at a retry) 54 Always OFF 55 Always ON 5

6 s by inverter rating Inverter type Torque boost value / (%) Automatic torque boost value (%) Motor rated (kw) Motor rated current (A) Motor no-load current (%) VFNCS-P VFNCS-P VFNCS-4P VFNCS-7P VFNCS-PL VFNCS-PL VFNCS-4PL VFNCS-7PL VFNCS-5PL VFNCS-PL VFNC-P VFNC-P VFNC-4P VFNC-7P VFNC-5P VFNC-P VFNC-7P E s by Setting Main regions Max. frequency (Hz) Frequency / / / (Hz) Base frequency voltage / (V) Sink/source switching Supply voltage correction (output voltage Iimitation) Motor rated speed (min - ) Japan (Sink) 7 North America (Sink) 7 Asia (Sink) 4 Europe (Source) 4 6

VFS11 Parameter List for up to CPU version 105

VFS11 Parameter List for up to CPU version 105 E65824 VFS Parameter List for up to CPU version 5 Setting Date Customer End user Application Application No/Serial No Inverter s Type-Form Quantity Inverter s Serial No Motor s capacity If user s value

More information

VFS9 Parameter List for Version110 or later

VFS9 Parameter List for Version110 or later VFS9 Parameter List for Version110 or later Setting Date Customer End user Application Application /Serial Inverter s Type-Form Quantity Inverter s Serial Motor s capacity If user s value is same as shipping

More information

6.9 Jump frequency - Avoiding frequency resonance

6.9 Jump frequency - Avoiding frequency resonance E581595.9 Jump frequency - Avoiding frequency resonance : Jump frequency : Jumping width Function Resonance due to the natural frequency of the mechanical system can be avoided by jumping the resonant

More information

Before you operate the inverter, the parameters that you must first program are the basic parameters.

Before you operate the inverter, the parameters that you must first program are the basic parameters. . Main parameters Before you operate the inverter, the parameters that you must first program are the basic parameters..1 Searching for changes using the history function () : History function History

More information

ADJUSTABLE SPEED DRIVES FS1

ADJUSTABLE SPEED DRIVES FS1 ADJUSTABLE SPEED DRIVES FS1 Now Available With LonWorks BACnet & MetasysN2 FS1 Model FLA & Dimensions (in.)/ Weight (lbs.) VOLTAGE HP MODEL NUMBER FLA FRAME Dimensions (in.) SHIPPING H W D WEIGHT (lbs.)

More information

ROLL TO ROLL FUNCTION MANUAL FR-A (0.4K)-04750(90K)-R2R FR-A (0.4K)-06830(280K)-R2R FR-A (315K)-12120(500K)-R2R

ROLL TO ROLL FUNCTION MANUAL FR-A (0.4K)-04750(90K)-R2R FR-A (0.4K)-06830(280K)-R2R FR-A (315K)-12120(500K)-R2R INVERTER ROLL TO ROLL FUNCTION MANUAL FR-A820-00046(0.4K)-04750(90K)-R2R FR-A840-00023(0.4K)-06830(280K)-R2R FR-A842-07700(315K)-12120(500K)-R2R Roll to Roll Function The FR-A800-R2R inverter has dedicated

More information

ADJUSTABLE SPEED DRIVES. AS1 Drive

ADJUSTABLE SPEED DRIVES. AS1 Drive ADJUSTABLE SPEED DRIVES AS1 Drive Toshiba s New ASD Product Line The AS1 drive builds on Toshiba s history of supplying powerful, reliable, and versatile drives. We have combined our best drive features

More information

VFD - D700 Series Specifications. The latest low-cost variable speed control solution for centrifugal pumps.

VFD - D700 Series Specifications. The latest low-cost variable speed control solution for centrifugal pumps. VFD - D700 Series Specifications The latest low-cost variable speed control solution for centrifugal pumps. Built-in PID Control to maintain pressure, flow, measured value, and much more 125% overload

More information

CHAPTER 8 SUMMARY OF PARAMETER SETTINGS

CHAPTER 8 SUMMARY OF PARAMETER SETTINGS CHAPTER 8 SUMMARY OF PARAMETER SETTINGS VFD-S Series!: The parameter can be set during operation, *: Twice the value for 460V class. Group 0 User Parameters Parameters Explanation s 0-00 Identity Code

More information

13. Before making a service call Trip information and remedies

13. Before making a service call Trip information and remedies . Before making a service call Trip information and remedies.1 Trip causes/warnings and remedies When a problem arises, diagnose it in accordance with the following table. If it is found that replacement

More information

Multi-function, Compact Inverters. 3G3MV Series

Multi-function, Compact Inverters. 3G3MV Series Multi-function, Compact Inverters 3G3MV Series There has been a great demand for inverters with more functions and easier motor control than conventional i OMRON's powerful, compact 3G3MV Series with versat

More information

GS1 Parameter Summary Detailed Parameter Listings...4 9

GS1 Parameter Summary Detailed Parameter Listings...4 9 CHAPTER AC DRIVE 4 PARAMETERS Contents of this Chapter... GS1 Parameter Summary...............................4 2 Detailed Parameter Listings..............................4 9 Motor Parameters.........................................4

More information

TOSVERT VF-AS1 E Parameter List (V154)

TOSVERT VF-AS1 E Parameter List (V154) TOSVERT VFAS1 Parameter List (V154) VFAS1 Parameter List (V154) Setting date Customer End user Application Application No/Serial No Inverter s TypeForm Quantity Inverter s Serial No Motor s If user s setting

More information

CHAPTER AC DRIVE PARAMETERS. In This Chapter...

CHAPTER AC DRIVE PARAMETERS. In This Chapter... CHAPTER AC DRIVE 4 PARAMETERS In This Chapter... GS2 Parameter Summary....................4 2 Detailed Parameter Listings.................4 11 Motor Parameters........................4 11 Ramp Parameters.........................4

More information

E3 Adjustable Speed Drive Engineering Specification

E3 Adjustable Speed Drive Engineering Specification E3 Adjustable Speed Drive Engineering Specification PART 1 - GENERAL 1.0 Scope This specification shall cover Toshiba E3 AC Variable Frequency Drives, 6 pulse for 230V and 460V. 1.1 References A. National

More information

VF-nC1 Adjustable Speed Drive Engineering Specification

VF-nC1 Adjustable Speed Drive Engineering Specification PART 1 - GENERAL 1.0 Scope This specification shall cover Toshiba VF-nC1 AC Variable Frequency Drives, 6 pulse for 100V single-phase 0.1 to 0.75kW, 200V single-phase 0.2 to 2.2kW and 200V threephase 0.1

More information

Variable Frequency Drive / Inverter (0.4 ~ 280kW)

Variable Frequency Drive / Inverter (0.4 ~ 280kW) Variable Frequency Drive / Inverter (0.4 ~ 280kW) & Standard Features Configuration Comparison Comparison Table Enclosure IP00 IP20 NEMA 1 Rating Single phase 0.4 2.2kW 0.4 1.5kW Three phase 0.4 4kW Constant

More information

ADJUSTABLE SPEED DRIVES VF-S11 Sords Electric

ADJUSTABLE SPEED DRIVES VF-S11 Sords Electric ADJUSTABLE SPEED DRIVES VF-S11 The Next Generation of Micro Inverters is Here. The S11 provides maximum torque with precise speed control. It features an easy-to-use, quiet and compact design. In addition,

More information

AV-300i Specifications. Saftronics Inc. PC10 Product Specifications PC10. Mini Vector AC Drive

AV-300i Specifications. Saftronics Inc.  PC10 Product Specifications PC10. Mini Vector AC Drive Saftronics Inc. www.saftronics.com TM AV-300i Specifications PC10 Product Specifications PC10 Mini Vector AC Drive 1 (1) T hree-phas e 230V input Drive Hp 1/8 1/4 1/2 1 2 3 5 7.5 10 Nominal applicable

More information

S11 Adjustable Speed Drive Engineering Specification

S11 Adjustable Speed Drive Engineering Specification PART 1 - GENERAL 1.0 Scope This specification shall cover Toshiba S11 AC Variable Frequency Drives, 6 pulse for 3- phase 200-240VAC, 380-500VAC and single phase 200V to 240VAC. 1.1 References A. National

More information

CHAPTER 8 PARAMETER SUMMARY

CHAPTER 8 PARAMETER SUMMARY CHAPTER PARAMETER SUMMARY Group 0: System Parameter VFD-V Series 00-00 Identity Code Based on the model type 00-01 Rated Current Display 00-02 Parameter Reset 00-03 00-04 Star-up Display of the Drive Definitions

More information

FUJI Inverter. Standard Specifications

FUJI Inverter. Standard Specifications FUJI Inverter o Standard Specifications Norminal applied motor The rated output of a general-purpose motor, stated in kw. That is used as a standard motor. Rated capacity The rating of an output capacity,

More information

Index 2. G Gain settings 4 31 Glossary of terms A 2 Grommets 2 13

Index 2. G Gain settings 4 31 Glossary of terms A 2 Grommets 2 13 Index A A Group functions 3 9 AC reactors 5 3 Acceleration 1 15, 3 8 characteristic curves 3 26 second function 3 24 two-stage 4 19 Acceleration stop function 3 21 Access levels 3 5, 3 36, 4 25 Access

More information

HPVFP High Performance Full Function Vector Frequency Inverter

HPVFP High Performance Full Function Vector Frequency Inverter Advanced User Manual HPVFP High Performance Full Function Vector Frequency Inverter HP VER 1.00 1. HPVFP Parameter Set Overview...3 1.1. About this section...3 1.2. Parameter Structure Overview...3 1.3.

More information

INTERNATIONAL SERVICE BULLETIN - I #2-319 Liberty - Delta M+ VFD parameter list. A VFD parameter list is required when replacing a DELTA M+ VFD.

INTERNATIONAL SERVICE BULLETIN - I #2-319 Liberty - Delta M+ VFD parameter list. A VFD parameter list is required when replacing a DELTA M+ VFD. RYKO Manufacturing Company 116 N.W. 54th Ave. P.O.Box 38 Grimes, Iowa 5111 Phone (515) 986-37 www.ryko.com Fax (515) 986-3621 sales@ ryko.com INTERNATIONAL SERVICE BULLETIN - I #2-319 Liberty - Delta M+

More information

SJ100 Series Inverter Quick Reference Guide. Single-phase Input 200V Class Three-phase Input 200V Class Three-phase Input 400V Class

SJ100 Series Inverter Quick Reference Guide. Single-phase Input 200V Class Three-phase Input 200V Class Three-phase Input 400V Class HITACHI SJ1 Series Inverter Quick Reference Guide Single-phase Input 2V Class Three-phase Input 2V Class Three-phase Input 4V Class Hitachi Industrial Equipment Systems Co., Ltd. Manual No. NB5821XD Dec.

More information

HITACHI. L100-M Series Inverter Quick Reference Guide. Hitachi Industrial Equipment Systems Co., Ltd. Single-phase Input 100V Class

HITACHI. L100-M Series Inverter Quick Reference Guide. Hitachi Industrial Equipment Systems Co., Ltd. Single-phase Input 100V Class HITACHI L1-M Series Inverter Quick Reference Guide Single-phase Input 1V Class Hitachi Industrial Equipment Systems Co., Ltd. Manual No. NB5741XD December 23 Caution: Be sure to read the L1 Inverter Manual

More information

P-SERIES VFD 1-40HP (200~230VAC), 1-400HP (380~480VAC),3Ø Dual Rated for Constant & Variable Torque Integrated PID Control

P-SERIES VFD 1-40HP (200~230VAC), 1-400HP (380~480VAC),3Ø Dual Rated for Constant & Variable Torque Integrated PID Control P-SERIES VFD 1-40HP (200~230VAC), 1-400HP (380~480VAC),3Ø Dual Rated for Constant & Variable Torque Integrated PID Control NEW FIRMWARE MAKES SETUP A SNAP Application based commissioning allows parameters

More information

TECO F510 Inverter. Quick Start Guide. Step 1. Supply & Motor connection

TECO F510 Inverter. Quick Start Guide. Step 1. Supply & Motor connection Quick Start Guide TECO F510 Inverter This guide is to assist you in installing and running the inverter and verify that it is functioning correctly for it s main and basic features. For detailed information

More information

[ 4 ] Using pulse train input (F01 = 12)

[ 4 ] Using pulse train input (F01 = 12) [ 4 ] Using pulse train input (F01 = 12) Selecting the pulse train input format (d59) A pulse train in the format selected by the function code d59 can give a frequency command to the inverter. Three types

More information

TOSVERT VF-PS1 E Parameter List (V654)

TOSVERT VF-PS1 E Parameter List (V654) TOSVERT VFPS1 Parameter List (V654) VFPS1 Parameter List (V654) Setting date Customer End user Application Application No/Serial No Inverter s TypeForm Quantity Inverter s Serial No Motor s If user s setting

More information

Superior performance just for you

Superior performance just for you www.seec.com.tw Compact Design Vector Control SS2 Series Inverter Superior performance just for you (0.4KW-5.5KW) ISO 14001 BSMI REGISTERED CERT. NO. 4A4E003 ISO 9001 BSMI REGISTERED CERT. NO. 4A4Y003

More information

Manual Overview...1 2

Manual Overview...1 2 GETTING STARTED CHAPTER 1 Contents of this Chapter... Manual Overview.....................................1 2 Overview of this Publication..................................1 2 Who Should Read This Manual...............................1

More information

Quick Reference Guide. DF5-... Frequency Inverters 02/02 AWB GB. For Immediate Delivery call KMParts.com at (866)

Quick Reference Guide. DF5-... Frequency Inverters 02/02 AWB GB. For Immediate Delivery call KMParts.com at (866) DF5-... Frequency Inverters 1 st published 22, edition 02/02 Moeller GmbH, 53105 Bonn Author: Holger Friedrich Editor: Michael Kämper Translator: Dominik Kreuzer All brand and product names are trademarks

More information

CHAPTER 5 DESCRIPTION OF PARAMETER SETTINGS

CHAPTER 5 DESCRIPTION OF PARAMETER SETTINGS CHAPTER DESCRIPTION OF PARAMETER SETTINGS.1 Group 0: System Parameter VFD-V Series 00-00 Identity Code Factory setting Read Only Settings Based on the model type 00-01 Rated Current Display Factory setting

More information

High-performance Vector-type SF-G Series Inverter

High-performance Vector-type SF-G Series Inverter SF-G Series 5.5-160KW Quality and Innovation Industrial Upgrading High-performance ector-type SF-G Series Inverter Superior Performance just for your ISO 14001 BSMI ISO 9001 BSMI 認可登錄 REGISTERED CERT.

More information

INDEX. i 1. B Braking Resistor Dimensions: A 24 Braking Resistors: A 20 Braking Units: A 20. DURAPULSE AC Drive User Manual

INDEX. i 1. B Braking Resistor Dimensions: A 24 Braking Resistors: A 20 Braking Units: A 20. DURAPULSE AC Drive User Manual INDEX A AC Drive Cover: 1 6 Dimensions: 2 4 External Parts and Labels: 1 6 Heat Sink Fins: 1 6 Input Mode Switch (Sink/Source): 1 6 Introduction to DuraPulse GS3 AC drive: 1 3 Keypad: 1 6 Model Number

More information

CHAPTER 5 DESCRIPTION OF PARAMETER SETTINGS

CHAPTER 5 DESCRIPTION OF PARAMETER SETTINGS CHAPTER DESCRIPTION OF PARAMETER SETTINGS.1 Group 0: User Parameters 0-00 Identity Code of AC Drive Factory setting: d# Settings None V HP 1/4 1/2 1 2 3 11V/230V d0 d2 d4 d6 d8 460V -- -- -- d3 d d7 d9

More information

BACnet- MS/TP COMMUNICATION V

BACnet- MS/TP COMMUNICATION V - MS/TP COMMUNICATION V1.00.08.17 11.1 Introduction The VFD can be controlled and monitored through the BACnet MS/TP protocol over an RS-485 connection. The VFD operates as an MS/TP master device, which

More information

General Specifications FECA-TE /2010. Phone: Fax: Web:

General Specifications FECA-TE /2010. Phone: Fax: Web: General Specifications FECA-TE-117 06/2010 1. Standard Specifications 1) Three-phase 230V series Output ratings Input ratings Braking Item Specifications Type (FRN C1S-2U) F12 F25 F50 001 002 003 005 Nominal

More information

Fan and Pump AC Inverter

Fan and Pump AC Inverter Fan and Pump AC Inverter Key Features for Fan and Pump Applications PID and Auto Energy Saving Functions. Input Phase Loss and Output Phase Loss Protection. LCD Keypad can be used to copy parameter settings

More information

D SERIES LM16. COMPACT DRIVE V/f and SLV CONTROL. LM16 COMPACT DRIVE V/f and SLV CONTROL

D SERIES LM16. COMPACT DRIVE V/f and SLV CONTROL. LM16 COMPACT DRIVE V/f and SLV CONTROL D SERIES LM16 COMPACT DRIVE V/f and SLV CONTROL LM16 COMPACT DRIVE V/f and SLV CONTROL 1 2 SERIES 1 2 page 4 page 6 Introduction Fields of application 3 page 7 4 page 8 Designation Product offer 5 6 page

More information

Quick Reference Guide. DF5-... Frequency Inverters 02/02 AWB GB

Quick Reference Guide. DF5-... Frequency Inverters 02/02 AWB GB DF5-... Frequency Inverters 1 st published 22, edition 02/02 Moeller GmbH, 53105 Bonn Author: Holger Friedrich Editor: Michael Kämper Translator: Dominik Kreuzer All brand and product names are trademarks

More information

THYFREC-VT210S 400V System 37 to 315kW (C/T) 400V System 45 to 370kW (V/T) QUICK START GUIDE

THYFREC-VT210S 400V System 37 to 315kW (C/T) 400V System 45 to 370kW (V/T) QUICK START GUIDE MEIDEN AC SPEED CONTROL EQUIPMENT THYFREC-VT210S 400V System 37 to 315kW (C/T) 400V System 45 to 370kW (V/T) QUICK START GUIDE NOTICE 1. Read this manual thoroughly before using the VT210S, and store in

More information

BOSTON GEAR CONTROLLERS. ACE 20 Series 1/8 through 10 HP Adjustable Frequency AC Motor Controllers. MTY (81)

BOSTON GEAR CONTROLLERS. ACE 20 Series 1/8 through 10 HP Adjustable Frequency AC Motor Controllers. MTY (81) BOSTON GEAR CONTROLLERS ACE 20 Series 1/8 through 10 HP Adjustable Frequency AC Motor Controllers ACE 20 Series Offering full-featured control in high torque, low speed applications from 1/8 to 10 HP,

More information

AV-300i Specifications. Saftronics Inc. VG10 Product Specifications VG10. Dynamic Vector Drive

AV-300i Specifications. Saftronics Inc.   VG10 Product Specifications VG10. Dynamic Vector Drive Saftronics Inc. www.saftronics.com TM AV-300i Specifications VG10 Product Specifications VG10 Dynamic Vector Drive 1 Category Item Description Nominal Motor 230 VAC, 3 Phase 1/4 Hp to 125 Hp 460 VAC, 3

More information

Compact & Powerful Inverter STARVERT ig5a 0.4~1.5kW 1phase 200~230Volts 0.4~22kW 3Phase 200~230Volts 0.4~22kW 3Phase 380~480Volts

Compact & Powerful Inverter STARVERT ig5a 0.4~1.5kW 1phase 200~230Volts 0.4~22kW 3Phase 200~230Volts 0.4~22kW 3Phase 380~480Volts Compact & Powerful Inverter STARVERT ig5a 0.4~1.5kW 1phase 200~230Volts 0.4~22kW 3Phase 200~230Volts 0.4~22kW 3Phase 380~480Volts Inverter STARVERT ig5a LS Starvert ig5a is very competitive in its price

More information

GB QUICK GUIDE FOR THE CONFIGURATION OF VARIABLE SPEED DRIVES

GB QUICK GUIDE FOR THE CONFIGURATION OF VARIABLE SPEED DRIVES GB QUICK GUIDE FOR THE CONFIGURATION OF VARIABLE SPEED DRIVES LOVATO ELECTRIC S.P.A. 24020 GORLE (BERGAMO) ITALIA VIA DON E. MAZZA, 12 TEL. 035 4282111 FAX (Nazionale): 035 4282200 FAX (International):

More information

NEW Single-phase 100V class 0.1 to 0.75kW Single-phase 200V class 0.2 to 2.2kW Three-phase 200V class 0.1 to 2.2kW

NEW Single-phase 100V class 0.1 to 0.75kW Single-phase 200V class 0.2 to 2.2kW Three-phase 200V class 0.1 to 2.2kW Ultra-Compact, Easy-To-Use Inverter TOSVERT TM NEW Single-phase 1V class.1 to.75kw Single-phase 2V class.2 to 2.2kW Three-phase 2V class.1 to 2.2kW TOSVERT is a trademark of Toshiba Corporation. Form V

More information

D SERIES EM16 IP 20 / NEMA 1 & IP 66 / NEMA 4X COMPACT VECTOR CONTROL DRIVE EM 16 COMPACT VECTOR CONTROL DRIVE

D SERIES EM16 IP 20 / NEMA 1 & IP 66 / NEMA 4X COMPACT VECTOR CONTROL DRIVE EM 16 COMPACT VECTOR CONTROL DRIVE D SERIES EM16 IP 20 / NEMA 1 & IP 66 / NEMA 4X COMPACT VECTOR CONTROL DRIVE EM 16 COMPACT VECTOR CONTROL DRIVE 1 2 SERIES 1 2 pag. 4 pag. 5 Applications Model identification 3 pag. 5 4 pag. 6 Capacity

More information

Operating Instructions

Operating Instructions 4XH35QB151210 Small General Frequency Converter Operating Instructions 220V 0.75KW 5.5KW 400V 0.75KW 15KW Please read the instruction carefully and understand the contents so that it can be installed and

More information

Operation Instructions NORDAC SK 400E. Frequency Inverter. SK 400E B / SK 400E B (0.4kW / 0.7kW, 1~ 115V)

Operation Instructions NORDAC SK 400E. Frequency Inverter. SK 400E B / SK 400E B (0.4kW / 0.7kW, 1~ 115V) NORDAC SK4E Safety Instructions Operation Instructions NORDAC SK 4E Frequency Inverter SK 4E-2-111-B / SK 4E-4-111-B (.4kW /.7kW, 1~ 115V) SK 4E-2-123-B... SK 4E-151-323-B (.2kW 1.5kW, 1/3~ 23V, 3~ 23V)

More information

General Specifications

General Specifications General Specifications FECA-TE-116 07/2010 Braking Input ratings Output ratings 1. Standard specifications 1) Three-phase 230V class series (1/8 to 20HP) Items Type (FRN E1S-2U) Nominal applied motor *1

More information

TOSVERT VF-AS1 PID control Instruction Manual

TOSVERT VF-AS1 PID control Instruction Manual TOSVERT VF-AS1 PID control Instruction Manual The technical information in this manual is provided to explain the principal functions and applications of the product, but not to grant you a license to

More information

Caution. Three-phase 400V series FRN0.4C1S-4A FRN0.75C1S-4A FRN1.5C1S-4A FRN2.2C1S-4A FRN3.7C1S-4A

Caution. Three-phase 400V series FRN0.4C1S-4A FRN0.75C1S-4A FRN1.5C1S-4A FRN2.2C1S-4A FRN3.7C1S-4A Variation Caution The contents of this catalog are provided to help you select the product model that is best for you. Before actual use, be sure to read the User s Manual thoroughly to assure correct

More information

High Performance Vector control SE2 Series Inverter

High Performance Vector control SE2 Series Inverter SE2 Series www.seec.com.tw High Performance Vector control SE2 Series Inverter ISO 14001 BSMI REGISTERED CERT. NO. 4A4E003 ISO 9001 BSMI REGISTERED CERT. NO. 4A4Y003 Feature Feature High-performance senseless

More information

α α Retry count clear Alarm reset Active End of retry S-curve time during accelerati on H04: (Count) setting S curve time during decelerati on

α α Retry count clear Alarm reset Active End of retry S-curve time during accelerati on H04: (Count) setting S curve time during decelerati on Upon success of retry Alarm Occurrence Disappearance Time S-curve acceleration/deceleration To reduce the shock of the mechanical system, the change in the output frequency is made smooth when the frequency

More information

QUICK GUIDE PUMP CONTROL. High performance Compact Inverter. Date Version 22/09/

QUICK GUIDE PUMP CONTROL. High performance Compact Inverter. Date Version 22/09/ QUICK GUIDE PUMP CONTROL High performance Compact Inverter Date Version 22/9/29 1..3 Version Details Date Written Checked Approved 1.. Draft J. M. Ibáñez J. Català 1..1 Second Version 17/9/29 J. M. Ibáñez

More information

Brake resistor can be connected. 150%/1Hz high starting torque by General -purpose magnetic flux vector control. Safety stop function

Brake resistor can be connected. 150%/1Hz high starting torque by General -purpose magnetic flux vector control. Safety stop function Features 1 Highly reliable inverter! Compact yet equipped with highest level of function/performance!! Standard specifications 5 Safety stop function (1) (1) The FR-D700 series is compliant to the EU Machinery

More information

Hyundai Inverter-N700E. The Controlling Solution of Powerful Inverter Brand

Hyundai Inverter-N700E. The Controlling Solution of Powerful Inverter Brand Hyundai InverterN7E The Controlling Solution of Powerful Inverter Brand Hyundai s Technology for the Best High performance inverter for efficient business design the best future with series CONTENTS 6

More information

Inverter Drive /Vector Drive Motors & Controls

Inverter Drive /Vector Drive Motors & Controls H2 Inverter/ Encoderless Vector Inverter Drive /Vector Drive & Controls 3/4 thru 50 180-264 VAC 3 Phase - 50/60 Hz 3/4 thru 60 340-528 VAC 3 Phase - 50/60 Hz 3/4 thru 60 515-660 VAC 3 Phase - 60 Hz HVAC

More information

NXL HVAC APPLICATION MANUAL Programming manual for NXL HVAC drives

NXL HVAC APPLICATION MANUAL Programming manual for NXL HVAC drives NXL HVAC APPLICATION MANUAL Programming manual for NXL HVAC drives Page 2 (68) Index Honeywell HVAC Application (Software [ALFIQ105] Ver.2.09) INDEX 1. INTRODUCTION... 3 2. CONTROL I/O... 3. HVAC APPLICATION

More information

INVERTER FR-D700. Global standard FACTORY AUTOMATION. Pursuing the easy operation. Long life and simple maintenance. Compact and space-saving

INVERTER FR-D700. Global standard FACTORY AUTOMATION. Pursuing the easy operation. Long life and simple maintenance. Compact and space-saving FACTORY AUTOMATION INVERTER FR-D700 Global standard Pursuing the easy operation Long life and simple maintenance Compact and space-saving Supporting various applications Global Player GLOBAL IMPACT OF

More information

INVERTER SF-320 Series

INVERTER SF-320 Series INVERTER SF-2 Series SensorlessVector Inverter CW No. D5E-2. No. D5E-2 The SF-2 series, designed for the global market adds new, more powerful vector control to standard V/f control. Easy-To-Use,Powerful

More information

ig5a 0.4~1.5kW (0.5~2HP) 1phase 200~230Volts 0.4~22kW (0.5~30HP) 3Phase 200~230Volts 0.4~22kW (0.5~30HP) 3Phase 380~480Volts Compact & Powerful Drive

ig5a 0.4~1.5kW (0.5~2HP) 1phase 200~230Volts 0.4~22kW (0.5~30HP) 3Phase 200~230Volts 0.4~22kW (0.5~30HP) 3Phase 380~480Volts Compact & Powerful Drive Compact & Powerful Drive iga ~1.kW (0.~2HP) 1phase 200~230Volts ~22kW (0.~30HP) 3Phase 200~230Volts ~22kW (0.~30HP) 3Phase 380~480Volts Drive Starvert iga LS Starvert iga is very competitive in its price

More information

OPC-E1-PG3 Specifications

OPC-E1-PG3 Specifications OPC-E1-PG3 Specifications Power Electronics Business Group Drive Division Development Dept. b DATE NAME APPROVE a DRAWN 2006-06-05 O. Mizuno CHECKED 2006-06-06 T. Ichihara K. Fujita Fuji Electric Co.,

More information

THYFREC-VT110S 200V 1PH System 0.4 to 2.2kW 400V 3PH System 0.75 to 2.2kW QUICK START GUIDE

THYFREC-VT110S 200V 1PH System 0.4 to 2.2kW 400V 3PH System 0.75 to 2.2kW QUICK START GUIDE MEIDEN AC SPEED CONTROL EQUIPMENT THYFREC-VT110S 200V 1PH System 0.4 to 2.2kW 400V 3PH System 0.75 to 2.2kW QUICK START GUIDE NOTICE 1. Read this manual thoroughly before using the VT110S, and store in

More information

KBDA SERIES STANDARD FEATURES DESCRIPTION PERFORMANCE FEATURES PROTECTION FEATURES

KBDA SERIES STANDARD FEATURES DESCRIPTION PERFORMANCE FEATURES PROTECTION FEATURES KBDA SERIES ADJUSTABLE FREQUENCY DRIVES FOR 3-PHASE AC MOTORS NEMA-4X / IP-65 Washdown and Watertight for Indoor and Outdoor use MULTI-FUNCTION KEYPAD WITH 4-DIGIT LED DISPLAY Simplified Group Programming

More information

L100-M Series Inverters

L100-M Series Inverters L100-M Series Inverters Addendum to L100 Series Inverter Instruction Manual In This Addendum... page Getting Started... 3 Inverter Mounting and Installation... 10 Configuring Drive Parameters... 15 Operations

More information

QUick StARt guide. Customised to your machine Model: 3G3RX 200 V Class Three-Phase Input 0.4 to 55 kw 400 V Class Three-Phase Input 0.

QUick StARt guide. Customised to your machine Model: 3G3RX 200 V Class Three-Phase Input 0.4 to 55 kw 400 V Class Three-Phase Input 0. Cat. No. I130E-EN-02 RX Customised to your machine Model: 3G3RX 200 V Class Three-Phase Input 0.4 to 55 kw 400 V Class Three-Phase Input 0.4 to 132 kw QUick StARt guide Notice: OMRON Product References

More information

Invertek Optidrive E3 Frequency Inverter (IP20, 3ph output) Easy Start Guide

Invertek Optidrive E3 Frequency Inverter (IP20, 3ph output) Easy Start Guide Invertek Optidrive E3 Frequency Inverter (IP20, 3ph output) Easy Start Guide The Invertek Optidrive E3 Frequency Inverter range is available to order from inverterdrive.com This guide is intended to complement

More information

ig5a Compact AC Drive 0.4~1.5kW(0.5~2HP) 1-phase 200~230Volts 0.4~22kW(0.5~30HP) 3-Phase 200~230Volts 0.4~22kW(0.5~30HP) 3-Phase 380~480Volts

ig5a Compact AC Drive 0.4~1.5kW(0.5~2HP) 1-phase 200~230Volts 0.4~22kW(0.5~30HP) 3-Phase 200~230Volts 0.4~22kW(0.5~30HP) 3-Phase 380~480Volts iga Compact AC Drive ~1.kW(0.~2HP) 1-phase 200~230Volts ~22kW(0.~30HP) 3-Phase 200~230Volts ~22kW(0.~30HP) 3-Phase 380~480Volts Drive STARVERT iga LS Starvert iga is very competitive in its price and shows

More information

vacon nx all in one application manual ac drives Phone: Fax: Web: -

vacon nx all in one application manual ac drives Phone: Fax: Web:  - vacon nx ac drives all in one application manual vacon 1 INDEX Document ID:DPD00903A Revision release date: 30.3.2012 1. Basic Application...5 1.1. Introduction...5 1.1.1. Motor protection functions in

More information

Warning!! 2. The drive contains high voltage that can cause electric shock resulting in personal injury or loss of life.

Warning!! 2. The drive contains high voltage that can cause electric shock resulting in personal injury or loss of life. ! Warning!! 1. Please read this manual completely before installing the drive. 2. The drive contains high voltage that can cause electric shock resulting in personal injury or loss of life. 3. Be sure

More information

G+ Mini Transition Guide. Product Transition Guide P3 Series 2 to G+ Mini

G+ Mini Transition Guide. Product Transition Guide P3 Series 2 to G+ Mini Transition Guide Product Transition Guide to Rev: Page Intentionally Left Blank Transition Guide September 2008 Page 2 of 24 Table of Contents 1.1 Overview...4 1.2 Drive Replacement Checklist...4 1.3 Ratings

More information

CTi Automation - Phone: Fax: Web: -

CTi Automation - Phone: Fax: Web:  - CONTENTS Chapter 1 Specifications 1. Standard Specifications... 1-2 1.1 Three-phase 230V FRENIC5000G11S Series... 1-2 1.2 Three-phase 460V FRENIC5000G11S Series... 1-3 1.3 Three-phase 230V FRENIC5000P11S

More information

Configuring Drive Parameters

Configuring Drive Parameters 3 In This Chapter... page Choosing a Programming Device... 2 Using Keypad Devices... 3 D Group: Monitoring Functions... 6 F Group: Main Profile Parameters... 8 A Group: Standard Functions... 9 B Group:

More information

NX series Constant and variable torque Variable Speed Drives for induction motors

NX series Constant and variable torque Variable Speed Drives for induction motors Honeywell All in One Application Manual NX series Constant and variable torque Variable Speed Drives for induction motors Subject to changes without notice CONTENTS NX "All in One" APPLICATION MANUAL INDEX

More information

Variable Speed Drive TOSVERT VF-MB1

Variable Speed Drive TOSVERT VF-MB1 CKVJ-1180 Variable Speed Drive TOSVERT VF-MB1 Variable Speed Drive Single phase-240v: 0.2kW to 2.2kW Three phase-500v: 0.4kW to 15kW 1 Shape Your Industry Fit your application by 3 advanced features. The

More information

ADJUSTABLE SPEED DRIVES. HX7 Series. 18 Pulse. Phone: Fax: Web: -

ADJUSTABLE SPEED DRIVES. HX7 Series. 18 Pulse. Phone: Fax: Web:  - ADJUSTABLE SPEED DRIVES HX7 Series 18 Pulse Toshiba HX7 In some industrial applications, users need reliable and efficient adjustable speed drives that do not contribute significant harmonic distortion

More information

Frequency Inverters. SJ700B Series. Powerful Inverter for General Purpose Use. SJ700B Series

Frequency Inverters. SJ700B Series. Powerful Inverter for General Purpose Use. SJ700B Series Frequency Inverters Frequency Inverters High performance, powerful functions, user friendly. A powerful drive with high starting torque and easy configuration Improved Sensorless Vector Control and Auto

More information

SJ700 series High performance with Many useful Functions and, yet User Friendly. WJ200 series Pursuing the Ideal Compact Inverter NEW

SJ700 series High performance with Many useful Functions and, yet User Friendly. WJ200 series Pursuing the Ideal Compact Inverter NEW WJ200 series Pursuing the Ideal Compact Inverter NEW SJ700 series High performance with Many useful Functions and, yet User Friendly X200 series Simple, Trip-suppression and Eco-friendly Compact Inverter

More information

AF91 Adjustable Frequency Drives Series B

AF91 Adjustable Frequency Drives Series B Effective: January, 00 Page New Information AF9 Adjustable Model AF9 Description Model AF9 Adjustable Frequency AC Drives are designed to provide adjustable speed control of -phase motors. These microprocessor-based

More information

VS-616G5 Series (Revision F) Programming Manual. Constant Torque Inverter with Adaptive Vector Control (AVC )

VS-616G5 Series (Revision F) Programming Manual. Constant Torque Inverter with Adaptive Vector Control (AVC ) VS-616G5 Series (Revision F) Programming Manual Constant Torque Inverter with Adaptive Control (AVC ) ! WARNING PRECAUTIONS NOTICE 1) Only turn ON the input power supply after replacing the front cover.

More information

Series Concepts. Ideal functions to meet various needs. New, compact design. Simple operation. Flexible through optionals

Series Concepts. Ideal functions to meet various needs. New, compact design. Simple operation. Flexible through optionals MEH441a Series Concepts Ideal functions to meet various needs New, compact design Simple operation Flexible through optionals A broad range of model variations Actual size Global products The FRENIC-Mini

More information

Instruction Manual. The new high-performance inverter VF-AS1. 200V class kW 400V class kW NOTICE

Instruction Manual. The new high-performance inverter VF-AS1. 200V class kW 400V class kW NOTICE E6581301 Safety precautions Introduction I II Contents Instruction Manual The new high-performance inverter TOSVERT TM 200V class 0.475kW 400V class 0.75500kW NOTICE VF-AS1 1.Make sure that this instruction

More information

(Supplement to Instruction Manual)

(Supplement to Instruction Manual) (Supplement to Instruction Manual) High Performance, Multifunction Inverter About this document This manual, a supplement for the FRENIC-MEGA series of inverters having a ROM version 3600 or later, contains

More information

Series Concepts. Ideal functions to meet various needs. New, compact design. Simple operation. Flexible through optionals

Series Concepts. Ideal functions to meet various needs. New, compact design. Simple operation. Flexible through optionals MEH451c Series Concepts Ideal functions to meet various needs New, compact design Simple operation Flexible through optionals A broad range of model variations Actual size Global products The FRENIC-Mini

More information

4.2.3 Main Circuit Cable Size and Tightening Torque Control Circuit Control Circuit Terminals

4.2.3 Main Circuit Cable Size and Tightening Torque Control Circuit Control Circuit Terminals 1 Table of Contents Chapter 1 Safety... 6 1.1 General Safety... 6 1.1.1 Usage... 6 1.1.2 Receiving... 6 1.1.3 Installation... 6 1.1.4 Wiring... 6 1.1.5 Operation... 7 1.1.6 Maintenance... 8 1.2 Warning

More information

AF-300 G11 Specifications. GE Industrial Systems. Product Specifications AF-300 G11

AF-300 G11 Specifications. GE Industrial Systems. Product Specifications AF-300 G11 apple GE Industrial Systems Product Specifications AF-300 G11 TM 1 Category Item Description Nominal Motor 230 VAC, 3 Phase 1/4 Hp to 125 Hp 460 VAC, 3 Phase 1/2 Hp to 450 Hp Braking Torque (Standard)

More information

Instruction Manual. The new high-performance inverter VF-AS1. 200V class kW 400V class kW

Instruction Manual. The new high-performance inverter VF-AS1. 200V class kW 400V class kW Safety precautions Introduction I II Contents Instruction Manual The new high-performance inverter TOSVERT TM 200V class 0.4 75kW 400V class 0.75 500kW VF-AS1 NOTICE 1.Make sure that this instruction manual

More information

YL6000 Frequency Converter

YL6000 Frequency Converter HUAJIANG YL6000 Frequency Converter Table Manual Note 1. Before using YL600 products, User Manual must be carefully read and be kept properly for future reference after being read. 2. User Manual should

More information

ADJUSTABLE SPEED DRIVES. W7 Series. 18 Pulse

ADJUSTABLE SPEED DRIVES. W7 Series. 18 Pulse ADJUSTABLE SPEED DRIVES W7 Series 18 Pulse Meets or Exceeds Your Specifications Standard Specifications Item Voltage Class 460V Maximum HP 60 75 100 125 150 200 250 300 400 500 600 700 800 Drive Rating

More information

Multi-purpose Control Application II

Multi-purpose Control Application II VACON CX /CXL/CXS FREQUENCY CONVERTERS Multi-purpose Control Application II USER'S MANUAL Subject to changes without notice Vacon Page 1 Multi-purpose Control Application II (par. 0.1 = 0) CONTENTS 1 General...

More information

MD310 Quick Start Manual. General-Purpose AC Drive

MD310 Quick Start Manual. General-Purpose AC Drive MD310 Quick Start Manual General-Purpose AC Drive ersion 0.1 Dated 14 th OCT, 2013 CONTENTS CHAPTER 1 PRODUCT INFORMATION... 1 1.1 Designation... 1 1.2 Nameplate... 1 1.3 General Specifications... 2 CHAPTER

More information

9. RS485 Communication

9. RS485 Communication 9. RS485 The communication between inverter and external controller is doing by RS485 using modular connector in cling to inverter controller. Function Initial Minimum Maximum code Value Unit Description

More information

9. RS485 Communication (Option)

9. RS485 Communication (Option) 9. RS485 (Option) The communication between inverter and external controller is doing by RS485 using modular connector in cling to inverter controller. Function Initial Minimum Maximum code Value Unit

More information

TOSVERT VF-AS1 My Function Instruction Manual

TOSVERT VF-AS1 My Function Instruction Manual TOSVERT VF-AS1 My Function Instruction Manual January 2006 (C) Toshiba Schneider Inverter Corporation 2006 All rights reserved. Contents CONTENTS...1 1. INTRODUCTION...2 2. PARAMETERS USED...2 3. LOGIC

More information

NX Series Inverters. HVAC Pocket Programming Guide

NX Series Inverters. HVAC Pocket Programming Guide NX Series Inverters HVAC Pocket Programming Guide HVAC Pocket Programming Guide HVAC Pocket Programming Guide / Contents This guide provides a single reference document for the user of NXL HVAC (product

More information

INVERTER FREQROL-CS80

INVERTER FREQROL-CS80 FACTORY AUTOMATION INVERTER FREQROL-CS80 COMPACT & SMART Global Player GLOBAL IMPACT OF MITSUBISHI ELECTRIC Through Mitsubishi Electric s vision, Changes for the Better are possible for a brighter future.

More information