Industrial Power Supplies
|
|
|
- Grant Barker
- 5 years ago
- Views:
Transcription
1 Industrial Power Supplies Enduring High Quality Products
2 24 Volt Industrial Din Rail 120W to 480W Description: With built-in PFC 85% - 90% efficiency 60% power boost ability 23.5V to 29V adjustable output range Parallel operation: SNP-D129 & SNP-D249 by optional module ; SNP-D489 built-in Patented Ring-Free ZVS & Active PFC SNP-D129 * single phase * universal * 24V/5A, SNP-D249 * single phase * universal * 24V/10A, SNP-D489 * single phase * universal * 24V/20A SNP-D129 24V / 5A 120W SNP-D249 24V / 10A 240W SNP-D489 24V / 20A 480W
3 Switching Adapter SNP-POE Series / SNP-POEX-3 Series Description: SNP-POE series is an adapter for Ethernet application. It delivers power to end device through four idle line of Ethernet cable. To prevent the tiny signal line get hurt, the rated current allowed is 350mA, the trip point of over current protection is around 450mA. At no load condition, this series meets green power regulation. * SNP-POE7/-3 for12v/0.35a * SNP-POE9/-3 for 24V/0.35A * SNP- POET/-3 for 48V/0.35A SNP-A03x(-3) Series Description: * IEC320 C6 or C8 Input Socket * With ITE safety * Compatible to Class I/II safety & EMC * No Load Input Power < 0.5W * SNP-A03C for 9V/3.3A * SNP-A03C-3 for 9V/3.3A * SNP-A037 for 12V/2.5A * SNP-A037-3 for 12V/2.5A * SNP-A038 for 15V/2A * SNP- A038-3 for 15V/2A * SNP-A039 for 24V/1.3A * SNP-A039-3 for 24V/1.3A * SNP-A03T for 48V/0.75A * SNP-A03T-3 for 48V/0.75A SNP-A06 Series Description: * IEC320 C8 Input Socket * With ITE & Medical safety * Compatible to Class II safety & EMC * No load input power < 1W * SNP-A067 for 12V/4.2A * SNP-A068 for 15V/3.6A * SNP-A069 for 24V/2.5A * SNP-A06T for 48V/1.25A SNP-A08 Series Description: * IEC320 C14 or C18 Input Socket * With Medical safety * CEC level IV compliant * Compatible to Class I/II safety & EMC * No load input power < 0.3W * SNP-A087(-3) for 12V/6A * SNP-A088(-3) for 15V/5A * SNP-A085(-3) for 18V/4.5A * SNP-A089(-3) for 24V/3.3A * SNP-A08T(-3) for 48V/1.75A SNP-A12 Series / SNP-A12x-M Series Description: * External Desktop Adaptor * With ITE & Medical (-M) safety * Built-in active PFC * Efficiency between 84% to 87% * Compatible to Class I safety & EMC * SNP-A127 for 12V/9A * SNP-A127-M for 12V/9A * SNP-A128 for 15V/7.5A * SNP-A128-M for 15V/7.5A * SNP-A125 for 18V/6.5A * SNP- A125-M for 18V/6.5A * SNP-A129 for 24V/5A * SNP-A129-M for 24V/5A * SNP-A12T for 48V/2.5A * SNP-A12T-M for 48V/2.5A
4 Switching Adapter SNP-PA5 Series Description: * External Desktop Adaptor * With ITE safety * Compatible to Class I safety & EMC * SNP-PA51 for 5V/3A, 12V/2.5A, -12V/0.3A * SNP-PA53 for 5V/3.5A, 12V/2.5A * SNP-PA54 for 5V/3A, 15V/1.5A, -15V/0.3A * SNP-PA5C for 9V/5A * SNP-PA55 for 18V/3A * SNP-PA57 for 12V/4.2A * SNP-PA58 for 15V/3.5A * SNP-PA58-C for 13.8V/3.5A * SNP-PA59 for 24V/2.3A * SNP-PA5T for 48V/1.1A
5 General Purpose Features : With ITE safety With power on LED With output adjustable trimmer Efficiency between 75% to 85% Operation from -20 to 70 degree C by convection SNP-C03 Series Rated 30W Peak 45W SNP-C03B for 3.3V/6A SNP-C036 for 5V/6A SNP-C037 for 12V/2.5A SNP-C038 for 15V/2A SNP-C039 for 24V/1.3A SNP-C03T for 48V/0.63A SNP-C06 Series Rated 60W Peak 90W SNP-C06B for 3.3V/15A SNP-C066 for 5V/10A SNP-C067 for 12V/5A SNP-C068 for 15V/4A SNP-C069 for 24V/2.5A SNP-C06T for 48V/1.3A SNP-C063 for 5V/6A, 12V/2A SNP-C06A for 5V/4A, 24V/1.5A SNP-C060 for 5V/5A, 12V/1.5A, -12V/0.5A, -5V/0.5A SNP-C064 for 5V/5A, 15V/1.2A, -15V/0.5A, -5V/0.5A SNP-C06F for 5V/3A, 12V/0.9A, 24V/0.9A, -12V/0.5A SNP-C08 Series Rated 80W Peak 120W SNP-CO8B for 3.3V/17A SNP-C086 for 5V/14A SNP-C087 for 12V/7A SNP-C088 for 15V/5.3A SNP-C089 for 24V/3.3A SNP-C08T for 48V/1.7A SNP-C083 for 5V/7A, 12V/3A SNP-C08A for 5V/5A, 24V/2A SNP-C080 for 5V/6A, 12V/2.5A, -12V/0.5A, -5V/0.5A SNP-C084 for 5V/6A, 15V/2A, -15V/0.5A, -5V/0.5A SNP-C08F for 5V/4A, 12V/1.5A, 24V/1A, -12V/0.5A
6 AC/DC DIN Rail mountable power supply DRA18 Features: AC/DC DIN Rail mountable power supply UL/cUL/TUV/CE Universal input 90~264VAC High efficiency up to 77% Short circuit protection Internal input filter 3 years warranty CASE SIZE 90 x 22.5 x 114mm ( 3.6 x 0.89 x 4.49 inches ) CASE MATERIAL WEIGHT Plastic 150g MODEL NO. INPUT WATTAGE CURRENT (min.) (typ.) *** Single Output Models *** DRA ~264 VAC 15 WATTS + 5 VDC 3000 ma 73% 75% DRA ~264 VAC 18 WATTS + 12 VDC 1500 ma 75% 77% DRA ~264 VAC 18 WATTS + 15 VDC 1200 ma 75% 77% DRA ~264 VAC 18 WATTS + 24 VDC 750 ma 75% 77% DRA18-05A 90~264 VAC 15 WATTS + 5 VDC 3000 ma 73% 75% DRA18-12A 90~264 VAC 18 WATTS + 12 VDC 1500 ma 75% 77% DRA18-15A 90~264 VAC 18 WATTS + 15 VDC 1200 ma 75% 77% DRA18-24A 90~264 VAC 18 WATTS + 24 VDC 750 ma 75% 77%
7 AC/DC DIN Rail mountable power supply DRAN60 Features: AC/DC DIN Rail mountable power supply Universal input 85~264VAC High efficiency up to 89% Short circuit protection Internal input filter 3 years warranty CASE SIZE 90 x 40.5 x 114mm ( 3.6 x 1.59 x 4.49 inches ) CASE MATERIAL WEIGHT Plastic 340g MODEL NO. INPUT WATTAGE CURRENT (min.) (typ.) *** Single Output Models *** DRAN ~264 VAC 50 WATTS + 5 VDC ma 77% 79% DRAN ~264 VAC 60 WATTS + 12 VDC 5000 ma 84% 86% DRAN ~264 VAC 60 WATTS + 24 VDC 2500 ma 86% 89% DRAN ~264 VAC 60 WATTS + 48 VDC 1250 ma 86% 89% DRAN60-05A 85~264 VAC 50 WATTS + 5 VDC ma 77% 79% DRAN60-12A 85~264 VAC 60 WATTS + 12 VDC 5000 ma 84% 86% DRAN60-24A 85~264 VAC 60 WATTS + 24 VDC 2500 ma 86% 89% DRAN60-48A 85~264 VAC 60 WATTS + 48 VDC 1250 ma 86% 89%
8 AC/DC DIN Rail mountable power supply DRA100 Features: AC/DC DIN Rail mountable power supply Universal input 90~264VAC High efficiency up to 88% Short circuit protection Internal input filter 3 years warranty CASE SIZE CASE MATERIAL WEIGHT Screw Terminal Type: 90 x 54x 114mm ( 3.6 x 2.13 x 4.49 inches ) Plastic 430g MODEL NO. INPUT WATTAGE CURRENT (min.) (typ.) *** Single Output Models *** DRA100-12A 90~264 VAC WATTS + 12 VDC 8.4 A 82% 84% DRA100-24A 90~264 VAC WATTS + 24 VDC 4.2A 84% 86% DRA100-24AL 90~264 VAC 91.2 WATTS + 24 VDC 3.8 A 83% 85% DRA100-48A 90~264 VAC WATTS + 48 VDC 2.1 A 86% 88%
9 AC/DC DIN Rail mountable power supply DRAN120 Features: AC/DC DIN Rail mountable power supply Compact design High efficiency up to 87% P.F.C. function available Parallel function available (switch) Input voltage 115/230VAC auto select 3 years warranty CASE SIZE CASE MATERIAL WEIGHT Screw Terminal Type: x 64 x 123.6mm ( 4.9 x 2.52 x 4.87 inches ) Detachable Connector Type: x 64 x 123.6mm ( 5.65 x 2.52 x 4.87 inches ) Metal 920g MODEL NO. INPUT WATTAGE CURRENT (min.) (typ.) *** Single Output Models *** DRAN120-12x 115/230 VAC 120 WATTS + 12 VDC 10 A 82% 84% DRAN120-24x 115/230 VAC 120 WATTS + 24 VDC 5 A 84% 86% DRAN120-24xL 115/230 VAC 91.2 WATTS + 24 VDC 3.8 A 83% 85% DRAN120-48x 115/230 VAC 120 WATTS + 48 VDC 2.5 A 85% 87%
10 AC/DC DIN Rail mountable power supply DRA240 Features: AC/DC DIN Rail mountable power supply Compact design High efficiency up to 90% P.F.C. function available Parallel function available (switch) Input voltage 115/230VAC auto select 3 years warranty CASE SIZE CASE MATERIAL WEIGHT Screw Terminal Type: x 83.5 x 123.6mm ( 4.9 x 3.29 x 4.87 inches ) Detachable Connector Type: x 83.5 x 123.6mm ( 5.65 x 3.29 x 4.87 inches) Metal 1380g MODEL NO. INPUT WATTAGE CURRENT (min.) (typ.) *** Single Output Models *** DRA240-24x 115/230 VAC 240 WATTS + 24 VDC 10 A 87% 89% DRA240-48x 115/230 VAC 240 WATTS + 48 VDC 5 A 88% 90%
11 AC/DC DIN Rail mountable power supply DRA480 Features: AC/DC DIN Rail mountable power supply Compact design High efficiency up to 90% Active P.F.C. function Parallel function available (switch) Universal input voltage 3 years warranty CASE SIZE CASE MATERIAL WEIGHT Screw Terminal Type: x x 123.6mm ( 4.9 x 6.91 x 4.87 inches ) Detachable Connector Type: x x 123.6mm ( 5.65 x 6.91 x 4.87 inches) Metal 1920g MODEL NO. INPUT WATTAGE CURRENT (min.) (typ.) *** Single Output Models *** DRA480-24x 90~264 VAC 480 WATTS + 24 VDC 20 A 86% 89% DRA480-48x 90~264 VAC 480 WATTS + 48 VDC 10 A 87% 90%
12 Type EGPT Stabilized DC power supplies, primary switch mode (slim shape) Application Control circuits, switchgear equipment, PLCs, etc. are supplied safely by these DC power supplies even under adverse conditions. If two power supplies with the same rated current and output voltage are connected in parallel, a very good power (weight ratio) is obtained (small size, low weight).
13 Construction For DIN rail TS 35 (DIN EN 50022) Safety: VDE 0805/EN 60950/IEC 950 Permanently resistant to short circuit and Interference emission: EN /-4, (class B) permanently stable at no load Interference immunity: EN /-2 High efficiency PFC norm: (harmonics) EN class A Specifications 1,25 A 2 A Article no.: * Input voltage: VAC / VDC VAC / VDC Wide range input Wide range input Frequency: Hz Hz Rated input current: 0,35 A at 230 V AC 0,6 A at 230 VAC AC Starting current inrush: < 1.5 A2s < 1.5 A2s Output voltage SELV 24 V ± 3% DC DC 24 V ± 3% DC DC Output current: A DC 0-2 A DC DC Output power: 30 W (max.) 48 W (max.) Ripple: Ripple: < 50 mv < 50 mv Ripple: < 50 mv < 50 mv Current limitation typ.: 1.5 A (permanently short circuit resistant) 2.5 A (permanently short circuit resistant) Protection class: II II Protection index: IP 20 IP 20 Efficiency typ.: 85% 89% Mains buffering: > 80 ms / 230 V AC 70 ms / 230 V AC > 15 ms / 115 VAC > 8 ms / 115 V AC > 10 ms / 120 V AC Temperature range 0 to 70 C (free convection) -10 C to +70 C (free convection) Leakage current: < 0.25 ma (at Hz) Load control: < 0.5% at 0 A to INenn Mains regulation: < 0.2% at Uein ±15% Dynamic response: < 2 ms at 10-90% INenn /overshoot < 2% Overload resistant yes Stable at no load: yes Output derating: 2,5 % / K from + 60 C Storage temperature: - 25 C to + 85 C Mounting position: wall-mounted, Input terminals up Overview Type Article no. Line voltage V Output voltage V (DC) Total current A (DC) Totalweight appr. kg Dimensions a b c approx. mm EGPT 2401, EGPT
14 Type EGPT Cosmo Stabilized DC power supplies primary switch mode (slim shape) Application Control circuits, switchgear equipment, PLCs, etc. are supplied safely by these DC power supplies even under adverse conditions. Two power supplies with the same rated current and output voltage can be connected. Floating operation with battery at half the rated current and thus uninterruptible power supply is also possible. a very good power density (weight ratio) is obtained (small size, low weight).
15 Construction For DIN rail TS 35 (DIN EN 50022) Overload indicator (LED) Permanently resistant to short circuit and permanently stable at no load Safety: VDE 0805/EN 60950/IEC 950 Interference emission: EN /-4, (class B) High efficiency Interference immunity: EN /-2 Status indicator (LED) PFC norm: (harmonics) EN class A Specifications 5A 10 A 20 A Article no.: * Input voltage: 115/230 V AC ( V DC )** 115/230 V AC ( V DC )** 230 V AC Input voltage range: V AC ; V AC V AC ; V AC V AC Frequency: Hz Hz Hz Rated input current: 0.9 A at 230 V AC 1.8 A at 230 V AC 3.3 A at 230 V AC Starting current inrush: < 30 A < 30 A < 30 A (at 230 V AC ) Power factor: 0.5 capacitive/230 V AC 0.5 capacitive/230 V AC 0.82 capacitive/230 V AC Output voltage SELV 24 V DC ± 1% 24 V DC ± 1% 24 V DC ± 1% Setting range typ.: V V V Output current: 0-5 A DC 0-10 A DC 0-20 A DC Output power: 120 W (max.) 240 W (max.) 480 W (max.) Ripple: < 50 mv < 50 mv < 50 mv Current limitation typ.: 6 A (permanently short circuit resistant) 12 A (permanently short circuit resistant) 22 A (permanently short circuit resistant) Protection class: I I I Protection index: IP 20 IP 20 IP 20 Efficiency typ.: 89% 90% 89% Mains buffering: > 20 ms / 230 V AC > 35 ms / 230 V AC > 20 ms / 230 V AC > 15 ms / 115 V AC > 30 ms / 115 V AC Temperature range -10 to 70 C -10 to 70 C -10 to 70 C (free convection) (free convection) (free convection) Leakage current: < 0.75 ma (at Hz) < 3.5 ma (at Hz) < 3.5 ma (at Hz) Load control: < 1% at 0 A to I nom < 1% at 0 A to I nom < 1% at 0 A bis I nom Mains regulation: < 0.2% at U on ± 15% < 0.2% at U on ± 15% < 0.2% at U on ± 15% Dynamic response: < 2 ms at 10-90% I nom < 2 ms at 10-90% I nom < 2 ms at 10-90% I n om Overshoot < 2% Overshoot < 2% Overshoot < 2% Overload resistant: yes yes yes Stable at no load: yes yes yes Output derating: 2,5% / K at +60 C 2,5% / K at +60 C 2,5% / K at +60 C Storage temperature: -25 C to + 85 C -25 C to + 85 C -25 C to + 85 C Mounting position: wall-mounted, wall-mounted, wall-mounted, input terminals up input terminals up input terminals up Overview Type Article no. Line voltage V Output voltage V (DC) Total current A (DC) Totalweight appr. kg Dimensions a b c approx. mm EGPT cosmo EGPT cosmo EGPT cosmo 2420*
16 Type EGPT Competent Stabilized DC power supplies primary switch mode (flat shape) Application Control circuits, switchgear equipment, PLCs, etc. are supplied safely by these DC power supplies even under adverse conditions. Two power supplies with the same rated current and output voltage can be connected. Floating operation with battery at half the rated current and thus uninterruptible power supply is also possible. a very good power density (weight ratio) is obtained (small size, low weight).
17 Construction For DIN rail TS 35 (DIN EN 50022) Safety: VDE 0805/EN 60950/IEC 950 Permanently resistant to short circuit and permanently stable at no load High efficiency Interference emission: EN /-4, (class B) Interference immunity: EN /-2 Specifications 2,5A 5A 10 A 20 A Article no.: Input voltage: V AC / V DC wide range input V AC / V DC wide range input 115/230 V AC ± 15%** switchable (soldering jumper) 230 V AC ± 15% Frequency Hz Hz Hz Hz Rated input current: 0.6 A at 230 V AC 1.23 A at 230 V AC 2.25 A at 230 V AC 4.2 A at 230 V AC Starting current inrush: < 30 A < 30 A < 30 A < 30 A Power factor: 0.52 capacitive/230 V AC 0.52 capacitive/230 V AC 0.52 capacitive/230 V AC 0.52capacitive/230 V AC Output voltage SELV: 24 VDC ± 1% 24 VDC ± 1% 24 VDC ± 1% 24 VDC ± 1% Setting range, typ.: V V V V Output current: ADC 0-5 ADC 0-10 ADC 0-20 ADC Output power: 60 W (max.) 120 W (max.) 240 W (max.) 480 W (max.) Ripple: < 100 mv < 100 mv < 100 mv < 100 mv Current limitation typ.: 3 A (permanently short circuit resistant) 6 A (permanently short circuit resistant) 12.5 A (permanently short circuit resistant) 25 A (permanently short circuit resistant) Protection class: I I I I Protection index: IP 20 IP 20 IP 20 IP 20 Efficiency typ.: 86% 86% 89% 88% Mains buffering: > 80 ms / 230 V AC > 80 ms / 230 V AC > 80 ms / 230 V AC > 15 ms / 230 V AC > 15 ms / 115 V AC > 15 ms / 115 V AC Temperature range: 0 to 70 C (free convection) 0 to 70 C (free convection) 0 to 70 C (free convection) 0 to 70 C (free convection) Leakage current: < 0.75 ma (at Hz) < 0.75 ma (at Hz) < 0.75 ma (at Hz) < 3.5 ma (at Hz) Load control: < 1% at 0 A to I nom < 1% at 0 A to I nom < 1% at 0 A to I nom < 1% at 0 A to I nom Mains regulation: < 0.2% at U on ± 15% < 0.2% at U on ± 15% < 0.2% at U on ± 15% < 0.2% at U on ± 15% Dynamic response: < 2 ms at 10-90% I nom < 2 ms at 10-90% I nom < 2 ms at 10-90% I nom < 2 ms at 10-90% I nom Overshoot < 2% Overshoot < 2% Overshoot < 2% Overshoot < 2% Overload resistant: yes yes yes Stable at no load: yes yes yes Output derating: 2,5% / K at +60 C 2,5% / K at +60 C 2,5% / K at +60 C 2,5% / K at +60 C Storage temperature: -25 C to + 85 C -25 C to + 85 C -25 C to + 85 C -25 C to + 85 C Mounting position: Overview wall-mounted, input terminals up Type Article no. Line voltage V wall-mounted, input terminals up Output voltage V (DC) Total current A (DC) wall-mounted, input terminals up Totalweight appr. kg wall-mounted, input terminals up Dimensions a b c approx. mm EGPT EGPT EGPT EGPT 2420*
18 Dewar Electronics Pty Ltd is a 100% privately owned Australian company, established in March To complement its manufactured products, Dewar also distributes a range of quality intelligent electronic devices, switches and power supplies from various sources worldwide. As a valued customer, you can trust Dewar to meet your product needs through the delivery of quality, reliable products, solutions and services. Enduring High Quality Products Dewar Electronics Pty. Ltd. 32 Taylors Road, Croydon, Victoria 3136 Australia Phone: Fax: sales@dewar.com.au
All specifications valid at normal input voltage, full load and +25 C after warm-up time unless otherwise stated.
KEY FEATURES Din Rail Switching Power Supply 180 Watt with 18CFM FAN for 12V to 48V Output Voltage 150 Watt with 30CFM FAN for 5V Output Voltage High Efficiency up to 93% Universal Input: 90-264 VAC Low
Switching power supplies CP range, Linear power supplies CP-L range. Content
CP range, Linear power supplies CP-L range Content Switching power supplies, primary switch mode, CP range Benefits and advantages... 136 Approvals... 137 Ordering details... 138 Technical data... 11 Dimensional
Output Power Output Voltage (3) Output Current Total Regulation (2) Efficiency (5) Model Number (1,6) 8 W 3.3 VDC 2.50 A 7% 68% AEL15US03 (4) 12 W
AEL15-80 Series 15-80 Watts Energy Efficiency Level V CEC 2008 and EISA 2007 Compliant Limited Power Source Approval China Compulsory Certification (CCC) Qualified +60 C Operating Temperature Compact Dimensions
LCL Series. SIngle Output Industrial Supplies. High Efficiency. Low Cost. 150 W Convection Cooled. 300 W & 500 W with Internal Fans
LCL Series SIngle Output Industrial Supplies High Efficiency Low Cost 150 W Convection Cooled 300 W & 500 W with Internal Fans Outputs form 12 V to 48 V 3 Year Warranty The LCL series is a low cost chassis
All specifications valid at normal input voltage, full load and +25 C after warm-up time unless otherwise stated.
KEY FEATURES Open Frame Switching Power Supply Remote ON/OFF Function 240 Watt with Free Air Convection 500 Watt with 30CFM FAN Built-in 12V/0.3A Auxiliary Output Standby 5V@1A with Fan, @0.4A without
All specifications valid at normal input voltage, full load and +25 C after warm-up time unless otherwise stated.
DPO-500 KEY FEATURES Open Frame Switching Power Supply Remote ON/OFF Function 240 Watt with Free Air Convection 500 Watt with 30CFM FAN Built-in 12V/0.3A Auxiliary Output Standby 5V@1A with Fan, @0.6A
DSA150 Series. xxx Series. 150 Watts. AC-DC Power Supplies. Models & Ratings. Mechanical Details 3.92 (99.8) 2.18 (55.5) 4.92 (125.
15 Watts xxx Series Ultra Slim Design 15% Peak Load for 3 seconds Ambient Operation from -1 C to +7 C High Efficiency Selectable Overload Characteristic Selectable Remote Inhibit or Enable 3 Year Warranty
TMT Series, 10 to 50 Watt. Order Code Output Power Output 1 PCB-Mount Chassis Mount max.
TMT Series, 10 to 50 Watt Features Ultra compact, fully encapsulated plastic case Single-, dual- and triple output models 2 package styles: - with screw terminal block for chassis mount - with solder pins
Power Supplies 3. SDN-C Compact DIN Rail Series
SDN-C Compact DIN Rail Series The SDN-C DIN rail power supplies are the next generation of the popular SDN series. These models combine high efficiency and compact size with new visual diagnostic LEDs
70 Watt Switching Medical Grade Switching Power Supply with Active PFC CONTENTS 1. GENERAL CIRCUIT TOPOLOGY...2
SNP-Z077 Specification Page 1 of 7 70 Watt Switching Medical Grade Switching Power Supply with Active PFC CONTENTS 1. GENERAL...2 2. CIRCUIT TOPOLOGY...2 3. AC INPUT...2 3.1. INPUT VOLTAGE...2 3.2. INPUT
LDC480 Series is a single phase, extremely compact Power Supply with active PFC specially designed for space sensitive and demanding applications.
LDC480 Series is a single phase, extremely compact Power Supply with active PFC specially designed for space sensitive and demanding applications. Its compact size, high efficiency, excellent reliability
All specifications valid at normal input voltage, full load and +25 C after warm-up time unless otherwise stated.
KEY FEATURES U Bracket Switching Power Supply Universal Input: 90-264 VAC Active P.F.C. Function, PF>0.95 300W Convection without FAN 480W Convection with 18CFM FAN Protections: Over Load / Over Voltage
TRIO-PS/1AC/24DC/ 5. Extract from the online catalog. Order No.:
Extract from the online catalog TRIO-PS/1AC/24DC/ 5 Order No.: 2866310 DIN rail power supply unit, primary-switched mode, 1-phase, output: 24 V DC / 5 A Commercial data EAN 4046356046640 Pack 1 pcs. Customs
Type CP-S, CP-C & CP-A Switch mode
Switch mode power CP-S, CP-C & CP-A Switch mode Characteristics CP-S and CP-C range Output current 5 A, 10 A and 20 A Integrated power reserve of up to 50 % 5 A and 10 A devices with pluggable connecting
DSR120 Series. xxx Series. 120 Watts. AC-DC Power Supplies. Models & Ratings. Mechanical Details
120 Watts xxx Series Ultra Slim Design - 32 mm 150% Peak Load for 3 seconds Ambient Operation from -25 C to +70 C Full Load at 60 C (24V/48V) High Efficiency - Up to 92% Volt-Free Contact for OK Selectable
Medical Safety Approvals (-M versions) Industrial Heavy Duty Terminals. Output Power up to 1500 W. High Power Density - 18W/in 3
HPU1K5 Series Low Profile 1.7 (43.2 mm), Industrial Supply Medical Safety Approvals (-M versions) Industrial Heavy Duty Terminals Output Power up to 1500 W Load dependant variable speed fans for audible
AC-DC ITE & Medical Switching Power Supply
KEY FEATURES U Bracket Medical Switching Power Supply Remote ON/OFF Function 200 Watt with Free Air Convection 500 Watt with 30CFM FAN Built-in 12V/0.3A Auxiliary Standby 5V@1A with Fan, @0.4A without
Power supply CP-D 24/4.2 Primary switch mode power supply
Data sheet Power supply CP-D 24/4.2 Primary switch mode power supply The CP-D range of modular power supply units in MDRC design (modular DIN rail components) is ideally suited for installation in distribution
DPS Series 5W, 10W, 18W AC/DC DIN Rail Power Supplies
DPS Series 5W, 1W, 18W AC/DC DI Rail Power Supplies AC - DC din rail mountable 5W, 1W and 18W class 2 power supplies E A R G U A R A T E E z U, cu, CE z Universal input 9~265VAC z High efficiency up to
CP-E range Benefits and advantages
Benefits and advantages Characteristics Output voltages 5 V, 12 V, 2 V, 8 V DC Adjustable output voltages Benefits Signalling output/contact Output currents 0.625 A / 0.75 A / 1.25 A / 2.5 A / A / 5 A
Single or parallel use selectable by user Adjustable output voltage. New narrow width saves panel space
4 Power Supplies The SolaHD Difference Rugged metal packaging Multiple output connections for ease of wiring multiple devices New visual diagnostic LEDs show input and output status (see table below) Large,
Power supply CP-D 24/1.3
2CDC 271 027 F0t07 a OUTPUT ++/ : terminals output Features Rated output voltage 24 V DC Output voltage adjustable via front face potentiometer OUTPUT Adjust Rated output current 1.3 A Rated output power
CP-T range Benefits and advantages
Benefits and advantages Characteristics Rated output voltages V, V DC Output voltage adjustable via front-face rotary potentiometer OUTPUT Adjust Rated output currents 5 A, 10 A, A, A Rated output powers
Courtesy of CMA/Flodyne/Hydradyne Motion Control Hydraulic Pneumatic Electrical Mechanical (800)
Primary switched-mode power supply units In standard machine production, the requirements for a power supply unit are mostly specified in advance. Here, the TRIO POWER power supply units are suitable which
Power supply CP-D 12/2.1
2CDC 271 025 F0t07 a OUTPUT ++/ : terminals output Features Rated output voltage 12 V DC Output voltage adjustable via front face potentiometer OUTPUT Adjust Rated output current 2.1 A Rated output power
CP-T range Product group picture
Product group picture /1 ABB Catalog Electronic Products and Relays 1/1 2CDC 110 00 C09 Table of contents CP-T range Product group picture /1 Table of contents /2 Benefits and advantages / Ordering details
AC-DC ITE & Medical Switching Power Supply
KEY FEATURES U Bracket Medical Switching Power Supply Cooling by Free Air Convection 160 Watts and 240 Watt with 10CFM Forced Air 4000VAC Input to 2MOPP Insulation High Efficiency up to 94% With P.F.C.
QUINT-PS/ 3AC/24DC/10
Primary-switched power supply with SFB technology, 3 AC, output current 10 A INTERFACE Data sheet 103131_en_01 1 Description PHOENIX CONTACT - 09/2009 Features QUINT POWER power supply units Maximum system
Switched mode power supply for DIN rail mounting type SMP23 DC24V/40A
Switched mode power supply for DIN rail mounting type SMP DC4V/40A Description Switched mode power supply (SMP) for rail mounting, three-phase supply voltage, high efficiency, integral input filter and
Switched mode power supply for DIN rail mounting type SMP21 DC24V/10A
Switched mode power supply for DIN rail mounting type SMP2 DC24V/0A Description Switched mode power supply for rail mounting, with independent change-over of input voltages (AC 5/20 V), integral passive
VP ELECTRONIQUE MASSY - Tel:
KEY FEATURES Switching Power Module for PCB Mountable Fully Encapsulated Plastic Case Universal Input Range 90-264VAC, 47-440 Hz Regulated Low Ripple and Noise Small Size But Higher Wattage Screw Terminal
Metal Case Power Supplies
, 120 480 Watt Features Compact U-bracket and enclosed power supplies Screw terminal block Very high efficiency up to 93 % No internal fan for 120 W & 240 W models. Universal input 90 264 VAC Adjustable
PHOENIX CONTACT - 05/2008. DANGER OF EXPLOSION! Remove an item only when it is not connected to power or if it is located in the non-explosive area.
Primary-switched power supply with SFB technology, 1 AC, output current 20 A INTERFACE Data Sheet 103129_en_01 PHOENIX CONTACT - 05/2008 1 Description QUINT POWER power supply units highest system availability
QUINT-PS/ 3AC/24DC/40
Primary-switched power supply unit with SFB technology, 3 AC, output current 40 A INTERFACE Data sheet 103133_en_00 1 Description PHOENIX CONTACT - 07/2009 Features QUINT POWER power supply units Maximum
QUINT-PS/ 1AC/24DC/20
Primary-switched power supply with SFB technology, 1 AC, output current 20 A INTERFACE Data sheet 103129_en_04 1 Description PHOENIX CONTACT - 02/2010 Features QUINT POWER power supply units Maximum system
Power supply CP-T 48/20.0 Primary switch mode power supply
Data sheet Power supply CP-T 48/20.0 Primary switch mode power supply The CP-T range of three-phase power supply units is the youngest member of ABB s power supply family. In terms of design and functionality,
Primary switch mode power supplies Product group picture
Primary switch mode power supplies Product group picture /1 ABB Catalog Electronic Products and Relays 2015 2CDC 110 004 C0210 Primary switch mode power supplies Table of contents Primary switch mode power
AC/DC Power Supply Single-Output
AC/DC Power Supply Single-Output The PFD-series is switcher designed to meet harmonic current distortion. The series has nominal 120 watts with a peak load of 240 watts during 10 seconds. The PFD is especially
SDN-C Single and three phase power supplies Product Guide
SDN-C Single and three phase power supplies Product Guide Compact PERFORMANCE DIN RAIL Series Our next-generation SDN-C power supplies offer high efficiency in a compact size, providing up to 960 Watts
For Immediate Delivery call KMParts.com at (866)
Contents 9/1 Page Description SN4 switched-mode power supply units 9/2 GW4 power supply units 9/3 GD4 power supply units 9/4 Basic Units, Accessories 9/5 Technical data 9/6 Dimensions 9/12 9/2 Description
MTC Series 15 W AC/DC Switching Power Supply Module Medical
Switching Power Modules for PCB Mounting Fully Encapsulated Plastic Case Universal Input Range 90-264VAC, 47-440 Hz Regulated Low Ripple and Noise & High Efficiency Isolation class II UL60601-1 / IEC60601-1
Related Products SDP Series SFL Series SCP Series SCL Series SDU UPS
4 Power Supplies SDN-P DIN Rail Series The SDN DIN Rail power supplies provide industry leading performance. Sag Immunity, transient suppression and noise tolerant, the SDN series ensures compatibility
PHOENIX CONTACT - 06/2008. Features. DANGER OF EXPLOSION! Only remove equipment when it is disconnected and not in the potentially explosive area.
Primary-switched power supply with SFB technology, 1 AC, output current 20 A INTERFACE Data Sheet 103383_en_00 1 Description PHOENIX CONTACT - 06/2008 Features QUINT POWER power supply units highest system
LDW240 Series are single, two or three phase DIN Rail Switching Power Supplies.
LDW240 Series are single, two or three phase DIN Rail Switching Power Supplies. Its compact size, high efficiency, excellent reliability together with easy installation due to pluggable connectors makes
CB Scheme UL508 UL ATEX II3G
Industrial Power Supplies UL Hazloc Class I, division 2 approval and ATEX certification SEMI F47 compliant for voltage sag immunity Rugged metal case with optional side-mounting Very high efficiency up
X Series Data Sheet 375, 500 Watt AC-DC and DC-DC DIN-Rail Converters
Features RoHS lead-free-solder and lead-solder-exempted products are available Rugged 5 mm DIN-rail snap-fit design Class I equipment Universal AC-input with single stage conversion AC to DC or DC input
Power supply CP-E 24/0.75
2CDC 271 016 F0t06 a OUTPUT L+, L : terminals output b INPUT L, N, PE: terminals input c LOW: red LED output voltage too low d OK: green LED output voltage OK e OUTPUT Adjust: rotary potentiometer output
SPECIFICATIONS. Input Output Approvals
Technical Data Sheet 172 Watt 15 Volt, Single Output, High V. Output Power Supply with PFC for LEDs UNIT CODE LED-HLG 185H-15 DESCRIPTION 172 Watt, Volt, Single Output, Waterproof, LED Power Supply with
LDC240 Series is a single phase, ultra compact DIN Rail Switching Power Supply with active PFC, ideal for many applications.
LDC240 Series is a single phase, ultra compact DIN Rail Switching Power Supply with active PFC, ideal for many applications. Its compact size, high efficiency, excellent reliability together with easy
10/2 Product overview. 10/3 4AC3 0, 4AC3 1 bell transformers. 10/5 4AC AC3 6 transformers for permanent loads. 10/8 4AC2 4 power supply units
BETA Switching Transformers, Bells and Socket Outlets /2 Product overview /3 4AC3 0, 4AC3 1 bell transformers /5 4AC3 4... 4AC3 transformers for permanent loads /8 4AC2 4 power supply units / 7LQ2 2 bells
Power Supplies. Certifications and Compliances Recognized Component, ITE - UL Certified, ITE - CSA C22.2 CSA
GL Series: Single & Multi Output Switchers The new GL series provides a broad range of AC/DC power supply solutions that covers power ratings from 25 watts to 250 watts for use in various industrial applications
Power supply CP-T 48/5.0 Primary switch mode power supply
Data sheet Power supply CP-T 48/5.0 Primary switch mode power supply The CP-T range of three-phase power supply units is the youngest member of ABB s power supply family. In terms of design and functionality,
Switching Power Supply Type SPP1 60W Enclosed type
Type SPP1 60W Enclosed type Universal AC input full range Short circuit protection Internal input filter High efficiency High average efficiency (meets ErP) Low stand-by power consumption CE, TUV, and
Power supply CP-E 24/2.5
2CDC 271 015 F0t06 a OUTPUT L+, L : terminals output b DC OK: terminal signalling output c INPUT L, N, PE: terminals input d OUTPUT OK: green LED output voltage OK e OUTPUT Adjust: potentiometer adjustment
QUINT-PS AC/24DC/40
Power supply unit INTERFACE Data sheet 102315_en_02 1 Description PHOENIX CONTACT 2010-04-23 Features QUINT POWER power supply units for plant and special engineering reliably start heavy loads with high
CCH400 & CCH600 Series
CCH4 & CCH6 Series 4 W & 6 W - Baseplate Cooled Compact 8.4 (214 mm) x 4 (12 mm) x 1.69 (43 mm) Package High Efficiency up to 9% -4 C to +85 C Baseplate Operating Temperature No Fan, Quiet Operation MIL-STD-461
Power supply CP-E 48/5.0 Primary switch mode power supply Data sheet
2CDC 271 028 F0008 OUTPUT L+, L+, L-, L-: terminals - output Features Rated output voltage 48 V DC Output voltage adjustable via front-face rotary potentiometer OUTPUT Adjust Rated output current 5 A Rated
Watts HCP Series
ACDC 6 Watts HCP Series High Efficiency up to 9% xppower.com High Power Density Programmable Output Voltage (%%) Programmable (%%) Parallel Operation Fully Featured Signals & Controls Year Warranty Specification
Notes: Note1: Efficiency is tested at nominal input and full load at +25 C ambient. Output Voltage 400VAC 400VAC
Features DIN-Rail Description 2 and 3-phase operation Input voltage range: 320 575VAC Output trim range: 22.5 29.5VDC High electrical strength; high reliability Permanent overload and short-circuit protection
Notes: Note1: Efficiency is tested at nominal input and full load at +25 C ambient. Output Voltage 400VAC 320VAC 360VAC 400VAC 400VAC
Features DIN-Rail 2 and 3-phase operation Input voltage range: 320 575VAC Output trim range: 22.5 29.5VDC High electrical strength; high reliability Permanent overload and short-circuit protection Parallel
MINI-PS AC/2X15DC/1
MII-PS-100-240AC/2X15DC/1 Power supply unit ITERFACE Data sheet 100299_en_04 1 Description PHOEIX COTACT - 2010-10-20 Features MII POWER is the extremely slim power supply unit with constructional widths
Power supply CP-E 12/10.0 Primary switch mode power supply Data sheet
2CDC 271 024 F0008 OUTPUT L+, L+, L-, L-: terminals - output INPUT L, N, PE: terminals - input OUTPUT OK: green LED - output voltage OK OUTPUT LOW: red LED - output voltage too low OUTPUT Adjust: potentiometer
General. Environmental. EMC & Safety
65// Watts ECS Series IT & Medical Safety Approvals xppower.com 65// W - Ratings Class I & Class II Construction Industry Standard 2 x 4 Package
ECP225-A Series. 225 Watts. AC-DC Power Supplies. Models & Ratings
ECP225- Series C-DC Power Supplies 225 Watts Low Profile High Power Density 3 by 5.0 Footprint 50 W Convection/ 225 W Force Cooled Ratings 5 V Standby and 2 V Fan Outputs Medical and ITE pprovals High
Power supply CP-E 24/2.5
2CDC 271 015 F0t06 a OUTPUT L+, L : terminals output b DC OK: terminal signalling output c INPUT L, N, PE: terminals input d OUTPUT OK: green LED output voltage OK e OUTPUT Adjust: potentiometer adjustment
Power supply CP-T 24/40.0 Primary switch mode power supply
Data sheet Power supply CP-T 24/40.0 Primary switch mode power supply The CP-T range of three-phase power supply units is the youngest member of ABB s power supply family. In terms of design and functionality,
Power supply CP-T 24/20.0 Primary switch mode power supply
Data sheet Power supply CP-T 24/20.0 Primary switch mode power supply The CP-T range of three-phase power supply units is the youngest member of ABB s power supply family. In terms of design and functionality,
Output Voltage* (nom.)(adjustable)
Industrial Power Supplies TIB Series, 80 480 W Slim profile, reduced module width High Power Factor up to 99% High efficiency up to 94% True back power immunity Low heat dissipation 150% peak current Automatic
ZITARES LCS Non-SELV, Constant current control gear, 1-channel, non-dimmable
ECG versions Order no. Output currents Output power LCS135-70FX-01/220-240 10116496 350 ma max. 70 W LCS150-70FX-01/220-240 10116500 500 ma max. 70 W LCS170-70FX-01/220-240 10116504 700 ma max. 70 W Performance
wenlok.com.mx Switched-mode and uninterruptible power supplies, and electronic fuses Let s connect. Power supply Catalogue 2015/2016
Switched-mode and uninterruptible power supplies, and electronic fuses Catalogue 2015/2016 Let s connect. Power supply Switch-Mode and Uninterruptible Power Supplies, Electronic Fuses Catalogue 4.3 Switch-Mode
Line Reg Load Reg Ripple Efficiency *Model Number Output V Output I (nom/max) (nom/max) & Noise (min/nom)
450 Watts Output Power Single Output Universal 90-264VAC Input 12VDC to 48VDC Output 4242VDC Input to Output Isolation Active Power Factor Correction 5 Volt Standby Power **Optional Current Share (CS)
MINI-PS AC/24DC/1.3
Power supply unit INTERFACE Data sheet 102894_en_03 1 Description PHOENIX CONTACT 2015-11-17 Features MINI POWER power supplies for MCR technology In measurement and control technology (MCR), modular electronics
Power supply CP-E 24/20.0
2CDC 271 027 F0008 a OUTPUT L+, L+, L, L-: terminals output b INPUT L, N, PE: terminals input c 13-14: terminals - signalling contact d OUTPUT OK: green LED output voltage OK e OUTPUT LOW: red LED output
ECC100 Series. -40 ºC to +75 ºC Operation. 100 W - Baseplate Cooled. High Efficiency Resonant Topology. Screw Terminals Available.
ECC100 Series -40 ºC to +75 ºC Operation 100 W - Baseplate Cooled High Efficiency Resonant Topology Screw Terminals Available 5V Standby Output Remote On/Off & Power OK Signal 3 Year Warranty The ECC100
Totalizing Counters mini-i
mini-i Type 634/635 Type 634: Counter with high immunity against magnetic interfere Type 635: Counter with high shock stability Miniature size Low power consumption Electrical connections in standard grid
MODEL MCHQ250V12B MCHQ250V24B MCHQ250V54B
Features: Universal AC input / Full range (Max. 305VAC) Protections: Short circuit / Over current / Over voltage / Over temperature Cooling by free air convection Built-in active PFC function IP65 design
LDW25-24 is a single or two phase AC or DC input DIN Rail Switching Power Supply.
LDW25-24 is a single or two phase AC or DC input DIN Rail Switching Power Supply. Its compact size, high efficiency, excellent reliability together with easy installation due to pluggable connectors makes
420 W High Line Output Power. Rugged Industrial Construction. -40 C to +70 C Operation. 5 V Standby. Screw Terminals. SEMI F47 Compliant
SHP350 Series 420 W High Line Output Power Rugged Industrial Construction Variable Speed Fan for Noise Reduction -40 C to +70 C Operation AC OK, Remote On/Off and Active Current Share Screw Terminals SEMI
Power Supplies. SCL Series. Features. Related Products. Applications
SDN Series The SDN family of DIN Rail power supplies have industry leading performance with a true industrial grade design and high quality that meets difficult industrial environmental conditions including
Power supply CP-T 24/10.0 Primary switch mode power supply
Data sheet Power supply CP-T 24/10.0 Primary switch mode power supply The CP-T range of three-phase power supply units is the youngest member of ABB s power supply family. In terms of design and functionality,
Model Number Output V1/V2/V3 Output I1/I2/I3 max. Ripple & Noise Efficiency(min/nom) Capacitive Load
130 Watts Output Power Triple Outputs Universal 90-264VAC Input 4242VDC Input to Output Isolation Active Power Factor Correction 3 x 5 x 1.4 Model Number Output V1/V2/V3 Output I1/I2/I3 max. Ripple & Noise
QUINT-PS-24DC/24DC/10
QUINT-PS-24/24/10 QUINT - converter, primary switched mode, input: 24 V, output: 24 V /10 A INTERFACE Data Sheet PHOENIX CONTACT - 02/2006 Description The QUINT - converter 24 V/10 A converts the voltage
Smart Power Relay E I...
Smart Power Relay E-48-8I... Description The Smart Power Relay E-48-8I.- is a remotely controllable electronic load disconnecting relay with three functions in a single unit: l electronic relay l electronic
These power supplies are ideal for telecom, datacom, industrial equipment and other applications.
The ABC350 Series of open frame power supplies feature a wide universal AC input range of 90 264 VAC, offering 350 W of output power in a compact 3 x 5 x 1 inch footprint, with a variety of isolated single
METRAClip87 and 88 Clamp Multimeters
3-349-795-03 1/7.14 Current and frequency measurement via clamp meter: METRAClip87: 1500 A AC TRMS and 1500 A DC METRAClip88: 2000 A AC TRMS and 3000 A DC Multimeter functions via connector sockets: V
www.tier1automation.com DIN Rail Power Supplies www.tier1automation.com Since 1984, Altech Corporation has grown to become a leading supplier of automation and industrial control components. Headquartered
120/240 Watt AC-DC Front End with PFC W Series Convert Select 120 Convert Select 240
Industrial Environment AC-DC Converters >100 Watt W Series 120/240 Watt AC-DC Front End with PFC W Series Convert Select 120 Convert Select 240 Rugged 35 mm DIN-rail snap-fit design 3000 V AC input to
PEAK OUTPUT CURRENT 1. MAP V 4.7V to 5.8V 8A 11A 0.2% ±1% 1% 4.9V to 5.1V PEAK OUTPUT CURRENT 4 LINE REGULATION
The Bel Power Solutions MAP30/40/42 Series of power supplies combines low cost and universal input in a board-only power solution to meet commercial and industrial requirements. Full international safety,
Output Voltage nom. (adjustable)
Industrial Power Supplies TIB Series, 80 480 W Slim profile, for DI-rail mounting Alternative side-mounting for flat panels High power factor by active power correction Very high efficiency up to 94.5%
Electrical Specifications VAC/390 VDC, Universal (Derate from 100% at 115VAC to 78% at 90VAC)
MWLC550 Medical Features 5 x 3 x 1.5 Inches Form factor Up to 550 Watts with Forced Air Cooled Efficiencies up to 92% -40 to 70 degree operating temperature* 12V / 0.5A Fan Output, Thermal Shut-Down feature
LFWLP W 12V 15.00A 25.00A 92%
WLP350 Series 350 Watts Low profile 1 5 x 3 footprint 200W / 350W Fan Up to 94% efficient Cover kits available EN55032 Level B conducted & radiated 5 Year warranty The LFWLP350 series of low profile, open
Single-output models feature wide-range output adjustability to meet a wide variety of standard and user-specific output voltage requirements.
Bel Power Solutions MAP55 Series of power supplies provides reliable, tightly-regulated DC power for commercial and industrial systems. Wide-range AC input and full international safety, EMI, and ESD compliance
Power Supply for LEDs 320 Watt 15 Volt, Waterproof, Single Output
Technical Data Sheet Power Supply for LEDs 3 Watt 15 Volt, Waterproof, Single Output UNIT CODE LED-HLG 3H-15 DESCRIPTION 285 Watt, 15 Volt, Single Output, Waterproof, LED Power Supply with Adjustable Output
Features. Regulated Converter RAC05- SK/C14. RAC 5 Watt Single Output RAC05-3.3SK/C14. AC/DC Converter
Features Regulated Converter Unique, patent-pending design Isolated power supply with integrated mains filter Packaged inside of line filter case Safe, touchable DC outputs Easy installation Worldwide
ADC5000 SERIES. AC/DC Switch Mode Power Supplies and Rectifiers for Industrial and Telecom Applications. 60W, 125W and 250 W
ADC5000 SERIES AC/DC Switch Mode Power Supplies and Rectifiers for Industrial and Telecom Applications 60W, 125W and 250 W Input voltage 230/115 VAC voltages 12, 24, 36 or 48 VDC Statistical MTBF >3 000
Features. LED Driver RACT Watt. TRIAC Dimmable. Single Output RACT AC/DC Converter
Features TRIAC Dimmable LED Driver Triac dimmable with leading or trailing edge dimmers Class II with SELV output (no earth required) Extra-large screw terminals and integrated cable clamps for easy installation
Features. LED Driver RACT Watt. TRIAC Dimmable. Single Output RACT12- AC/DC Converter
Features TRIAC Dimmable LED Driver Triac dimmable with leading or trailing edge dimmers Class II with SELV output (no earth required) Extra-large screw terminals and integrated cable clamps for easy installation
Product Specification
MODEL NO. WP507F12 This power supply is a small footprint, AC input power supply. This power supply is capable of supplying 400 watts of output power into 5 DC output voltages. 1.0 INPUT REQUIREMENTS 1.1
These power supplies are ideal for medical, telecom, datacom, industrial equipment and other applications.
The ABC550 Series of open frame power supplies feature a wide universal AC input range of 90 264 VAC, offering up to 550 W of output power with forced air cooling, or 250 W with conduction cooling in a
Doc. EA Model Number:
VPS-030AAC Series / VPS-030AAC 030AAC Highlights & Features VPS-030AAC05, 12, 15, 24 Meet DOE Level VI & ErP 2017 Low touch current. Suitable for type BF applications Detachable AC plug with multiple country