BSP752R. Features. Applications. Smart High-Side Power Switch

Transcription

1 Features Overload protection Current limitation Short circuit protection Thermal shutdown with restart Overvoltage protection (including load dump) Fast demagnetization of inductive loads Reverse battery protection with external resistor Open drain diagnostic output for overtemperature and short circuit Open load detection in OFF-State with external resistor CMOS compatible input Loss of GND and loss of V bb protection ESD - Protection Very low standby current AEC Qualified Green Product (RoHS compliant) PG-DSO-8 Applications All types of resistive, inductive and capacitive loads µc compatible power switch for 12V, 24V and 42V DC applications Replaces electromechanical relays and discrete circuits Description N Channel vertical power FET with charge pump, ground referenced CMOS compatible input and diagnostic feedback, monolithically integrated in Smart SIPMOS technology. Providing embedded protective functions. Table 1 Product Summary Parameter Symbol Values Overvoltage protection V bb(az) 62 V Operating voltage V DS(AZ) V ON-State Resistance R DS(ON) 200 mω Nominal load curent I L(nom) 1.3 A Data Sheet 1 V1.2

2 Voltage source Overvoltage protection Current limit Gate protection ESD Logic Charge pump Level shifter Rectifier Limit for unclamped ind. loads Temperature sensor miniprofet Data Sheet 2 V1.2

3 ± Operating temperature Storage temperature T stg P tot Ω Ω Ω ± ± Ω Data Sheet 3 V1.2

4 T C Ω Ω Ω Ω Ω Data Sheet 4 V1.2

5 Δ Ω Data Sheet 5 V1.2

6 Δ kω kω Data Sheet 6 V1.2

7 Data Sheet 7 V1.2

8 Ω Ω Ω Ω Data Sheet 8 V1.2

9 Ω = + + Data Sheet 9 V1.2

10 Ω Ω Data Sheet 10 V1.2

11 Ω Ω Ω Ω Data Sheet 11 V1.2

12 Data Sheet 12 V1.2

13 Data Sheet 13 V1.2

14 Ω L kω Data Sheet 14 V1.2

15 on off Data Sheet 15 V1.2

16 Data Sheet 16 V1.2

17 Package Outlines 0.35 x ) ±0.07 (1.45) 1.75 MAX. B 0.1 SEATING PLANE 0.2 M A B 8x 8 MAX. 1) ±0.2 C ± M C 8x 8 5 Figure ) Index Marking A 1) Does not include plastic or metal protrusion of 0.15 max. per side 2) Lead width can be 0.61 max. in dambar area PG-DSO-8-16, -24, -25, -28, -31, -33, -36, -44, -49-PO V06 PG-DSO-8-24 (Plastic Dual Small Outline Package) (RoHS-compliant) To meet the world-wide customer requirements for environmentally friendly products and to be compliant with government regulations the device is available as a green product. Green products are RoHS-Compliant (i.e Pbfree finish on leads and suitable for Pb-free soldering according to IPC/JEDEC J-STD-020). You can find all of our packages, sorts of packing and others in our Infineon Internet Page Products : Dimensions in mm Data Sheet 16 V1.2

18 Revision History Version Date Changes V1.2 Update to latest template Updated Package drawing Added page 14 V Creation of the green datasheet. First page : Adding the green logo and the AEC qualified Adding the bullet AEC qualified and the RoHS compliant features Package page Modification of the package to be green. Data Sheet 17 V1.2

19 Please read the Important Notice and Warnings at the end of this document Trademarks of Infineon Technologies AG µhvic, µipm, µpfc, AU-ConvertIR, AURIX, C166, CanPAK, CIPOS, CIPURSE, CoolDP, CoolGaN, COOLiR, CoolMOS, CoolSET, CoolSiC, DAVE, DI-POL, DirectFET, DrBlade, EasyPIM, EconoBRIDGE, EconoDUAL, EconoPACK, EconoPIM, EiceDRIVER, eupec, FCOS, GaNpowIR, HEXFET, HITFET, HybridPACK, imotion, IRAM, ISOFACE, IsoPACK, LEDrivIR, LITIX, MIPAQ, ModSTACK, my-d, NovalithIC, OPTIGA, OptiMOS, ORIGA, PowIRaudio, PowIRStage, PrimePACK, PrimeSTACK, PROFET, PRO-SIL, RASIC, REAL3, SmartLEWIS, SOLID FLASH, SPOC, StrongIRFET, SupIRBuck, TEMPFET, TRENCHSTOP, TriCore, UHVIC, XHP, XMC. Trademarks updated November 2015 Other Trademarks All referenced product or service names and trademarks are the property of their respective owners. Edition Published by Infineon Technologies AG Munich, Germany 2/23/16 Infineon Technologies AG. All Rights Reserved. Do you have a question about any aspect of this document? erratum@infineon.com IMPORTANT NOTICE The information given in this document shall in no event be regarded as a guarantee of conditions or characteristics ("Beschaffenheitsgarantie"). With respect to any examples, hints or any typical values stated herein and/or any information regarding the application of the product, Infineon Technologies hereby disclaims any and all warranties and liabilities of any kind, including without limitation warranties of non-infringement of intellectual property rights of any third party. In addition, any information given in this document is subject to customer's compliance with its obligations stated in this document and any applicable legal requirements, norms and standards concerning customer's products and any use of the product of Infineon Technologies in customer's applications. The data contained in this document is exclusively intended for technically trained staff. It is the responsibility of customer's technical departments to evaluate the suitability of the product for the intended application and the completeness of the product information given in this document with respect to such application. For further information on technology, delivery terms and conditions and prices, please contact the nearest Infineon Technologies Office ( WARNINGS Due to technical requirements products may contain dangerous substances. For information on the types in question please contact your nearest Infineon Technologies office. Except as otherwise explicitly approved by Infineon Technologies in a written document signed by authorized representatives of Infineon Technologies, Infineon Technologies products may not be used in any applications where a failure of the product or any consequences of the use thereof can reasonably be expected to result in personal injury.