AC Circuit Breaker Finder/Receptacle Tester

Transcription

1 AC Circuit Breaker Finder/Receptacle Tester 3-in-1 Tester Circuit Breaker Finder, Circuit Tester, and GFCI Receptacle Tester. Locates circuit breakers and tests receptacle wiring. Features: Quickly locate 110V to 125VAC Circuit Breakers and Fuses Variable Sensitivity adjustment to pinpoint correct circuit breaker Bright Red and Green LED s indicates if receptacle is correctly wired or six fault conditions Simply plug the GFCI Transmitter into an outlet and trace for the correct breaker at the electrical box Audible and visual circuit breaker indication Transmitter and Receiver snap together for easy storage Dims/Wt: Receiver: 6.4x2.2x1.5" (162x55x38)/4oz (113g); Transmitter: 3.25x1.75x1" (83x44x25mm)/1.6oz (45g) Complete with one Receiver, one GFCI Transmitter, and 9V battery for the Receiver GFCI Transmitter Tests GFCI circuits LED indication of 2 test conditions and 5 wiring faults Tests Reversed/Open Connections Lights indicate circuit condition Applications Locate branch circuit breakers without flipping breakers to other circuits Confirm proper wiring during electrical wiring installation or repair Test receptacle ground fault operation Adjustable sensitivity for pinpointing the correct breaker Ordering Information: CB10... Circuit Breaker Finder Specifications subject to change without notice. 7/16/08 - R1 Copyright Extech Instruments Corporation. All rights reserved including the right of reproduction in whole or in part in any form.

2 40130 AC Voltage Detector with On/Off Audible Beeper Button DV20/DV24 AC Voltage Detectors with Flashlight and CAT IV Option DV25 Dual Range AC Voltage Detector with Flashlight Non-contact detection of AC Voltage up to 600VAC Detects AC Voltage from 100V to 600V For use on 50/60Hz circuits Tip fits into outlets or against wire insulation Flashing red LED light and push button ON/OFF Audible beeper indicator Locate breaks in power cables CAT III-600V Dimensions: 6x0.75x1" (152x19x25mm) Weight: 2oz (57g) Complete with pocket clip and two AAA batteries AC Voltage Detector Rugged double molded housing Suitable for outlets or against wire insulation testing For use on 50/60Hz circuits Built-in bright flashlight Dimensions: 6.25x1" (159x25mm) Weight: 1.5oz (42g) Complete with pocket clip and two AAA batteries Model DV20 - CAT III-600V; 100V to 600V AC Voltage Model DV24 - CAT IV-1000V; 50V to 1000V AC Voltage DV20 AC Volt Detector with Flashlight DV24 CAT IV AC Volt Detector with Flashlight Two selectable ranges for low and high non-contact AC Voltage detection 2 ranges: 24 to 1000VAC and 100 to 1000VAC CAT IV-1000V safety rating Suitable for outlets or against wire insulation testing For use on 50/60Hz circuits Audible and Visual voltage indication Built-in bright flashlight with On/Off button Dimensions: 6.25 x 1" (159 x 25mm) Weight: 1.48oz (42g) Complete with pocket clip and two AAA batteries DV25 Dual Range AC Volt Detector DV30 Adjustable AC Voltage Detector with Sensitivity Adjustment DVA30 Combination Non-Contact AC Voltage and Current Detector Non-contact detection of AC Voltage down to 12VAC Detects AC Voltage from 12V to 600V Audible and visible voltage indication Sensitivity adjustment increases or reduces sensor trigger threshold Self test function CAT III-600V Dimensions: 6.1x1.1x1" (155x28x25mm) Weight: 1.5oz (42g) Complete with pocket clip and four LR44 button batteries Detects and pinpoints wide range Voltage and Current with Sensitivity Adjustment The only two-in-one AC Current (200mA to 1000A) and AC Voltage (12V to 600V) detector designed for electrical testing Loud audible and bright visible current and voltage detect indicators Sensitivity adjustment increases or reduces sensor trigger threshold CAT III-600V Dimensions: 7.6x1.2x0.9" (192x31x24mm) Weight: 2.1oz (60g) Complete with pocket clip and four LR44 button batteries DVA30 Non-Contact Volt/Current Detector DV30 Adjustable AC Voltage Detector All products on this page are UL and CE approval For the name of your local distributor, visit 31

3 NEW insulation testers MG302 CAT IV Insulation Tester/MultiMeter with Wireless PC Interface Combines a 1000V Insulation Tester with a True RMS MultiMeter Wireless USB interface transmits measurement data to a PC Large backlit triple display Insulation Resistance from 0.001MΩ to 4000MΩ Auto discharge Lock Power On Function for hands-free operation Data Hold to freeze displayed reading Min/Max and Relative mode Auto power off Waterproof (IP67) rugged design Complete with remote receiver with USB cable, Windows compatible software, heavy duty 4-wire test leads, protective rubber holster, multimeter test leads, carrying case, and 6 x AA batteries Digital Insulation Tester Autoranging insulation measurements to 10GΩ plus manual datalogging stores up to 9 data sets 250V, 500V and 1000V test voltages Large LCD display with analog bargraph Low Resistance function for testing connections Automatic discharge AC/DC voltage measurement up to 999V Auto power off Manual data record and read function (9 sets) Live circuit display warning and beeper Complete with carrying case, test leads, and 6 x AA batteries Digital High Voltage Insulation Tester High test Voltages up to 5kV with Insulation Resistance to 60GΩ Test Voltages of 500V, 1000V, 2500V, and 5000V Large 6000 count display with bargraph and backlight Polarization Index (PI) measurement Dielectric Absorption Ratio measurement 1 to 15 minute Timer function for Insulation Resistance measurements AC/DC Voltage from 0 to 600V with MAX/Min, Peak and Relative functions Autoranging and timer measurement function Indication of output voltage and discharge voltage Auto-discharge and voltage output warning function Auto Power off and battery check Complete with test leads, 8 x C batteries, and heavy duty carrying case; Model with 220V AC adaptor SpecificationS MG302 (433MHz) N N N Insulation Resistance (max resolution) 4MΩ, 40MΩ, 400MΩ, 4000MΩ (0.001MΩ) 4MΩ, 40MΩ, 400MΩ, 4000MΩ, 6MΩ, 60MΩ,600MΩ, 6GΩ, 60GΩ (1kΩ) 10GΩ (1kΩ) Basic Accuracy ±3% ±3% ±2.5% Insulation Test Voltages 125V, 250V, 500V, 1000V 250V, 500V, 1000V 500V, 1000V, 2500V, 5000V AC Voltage Test 1000V 999VAC 600VAC Low Resistance Test 0 to 400Ω 0 to 40Ω 0 to 600Ω MultiMeter Functions AC/DC Voltage (max resolution) 1000V (0.1mV AC/0.01mV DC) AC/DC Current (max resolution) 10A (0.1µA AC/0.01µA DC) Resistance (max resolution) 40MΩ (0.01Ω) Frequency (max resolution) 100MHZ (0.001Hz) Duty Cycle (max resolution) 0.1 to 99.9% (0.01%) Temperature (max resolution) -58 to 2192 F /-50 to 1200 C (0.1 ) 4-20mA% (max resolution) -25 to 125% (0.01%) CE, FCC CE, (FCC MG300 only) CE CE Dimensions/Weight 7.8 x 3.6 x 1.9" (200 x 92 x 50mm)/ 20.5oz (582g) 9.3x4.6x2.1" (235x116x54mm)/ 1.15lbs (520g) 7.8x5.8x3.4" (198x148x86mm)/ 3.2lbs (1438g) Warranty 2 year 2 year 2 year For the name of your local distributor, visit 45

4 FLIR E4, E5, E6, E8 with MSX Enhancement Display: 3 color LCD On-board 640 x 480 Digital Camera Easy-to-use, weighs only 1.2lbs 2% accuracy File format: Radiometric jpg Swappable Li-ion Battery with 4 hour life Spot Measurement mode Simultaneous storage of IR/Visual/MSX images Picture in Picture image (E6 and E8) Manual level and span thermal tuning (E6 and E8) Area Box Measurement mode (E5, E6 and E8) Each includes power supply/charger with four plugs, rechargeable battery, FLIR Tools software, USB cable, and hard transport case. E8 also includes extra battery and external battery charger. FLIR E4 4,800 pixels (80 x 60) FLIR E5 10,800 pixels (120 x 90) FLIR E6 19,200 pixels (160 x 120) FLIR E8 76,800 pixels (320 x 240) New Exclusive MSX Thermal Imaging Technology Made Affordable for Everyday Use What is MSX? Multi-Spectral Dynamic Imaging (MSX) for easier interpretation of an image - adds visible spectrum definition to IR images by detecting the edges of objects and including that detail in the thermal image. Text becomes clearly visible so that you can read a label or identifier within the IR image. This exclusive function provides extraordinary thermal detail that instantly highlights and orients problem locations and eliminates the need to refer back to a visual image for detail. Breaker Panel E8 with MSX Missing Insulation Summer Day E6 with MSX Warm Drain Pipe in Wall E4 with MSX

5 Imaging Specifications FEATURES FLIR E4 FLIR E5 FLIR E6 FLIR E8 IR Pixel Resolution 4,800 (80 x 60) 10,800 (120 x 90) (160 x 120) 76,800 (320 x 240) Thermal Sensitivity <0.15 C <0.10 C <0.06 C <0.06 C Temperature Range Measurement modes Centerspot Centerspot, Area Box, Auto Hot/Cold detection Frame Rate -4 to 482ºF (-20 to 250ºC) Field of View 45º x 34º Focus Auto Hot/Cold Detection No Auto min/max markers within area 9Hz Focus free Centerspot, Area Box, Auto Hot/Cold detection Auto min/max markers within area Centerspot, Area Box, Auto Hot/Cold detection Auto min/max markers within area T T T T T Included in All Models T T Additional Accessories Included with E8 T Optional Accessories Ordering Information FLIR E4 Compact Thermal Imaging Infrared Camera with MSX Enhancement (80x60) NIST... FLIR E4 with Certificate Traceable to NIST FLIR E5 Compact Thermal Imaging Infrared Camera with MSX Enhancement (120x90) NIST... FLIR E5 with Certificate Traceable to NIST FLIR E6 Compact Thermal Imaging Infrared Camera with MSX Enhancement (160x120) NIST... FLIR E6 with Certificate Traceable to NIST FLIR E8 Compact Thermal Imaging Infrared Camera with MSX Enhancement (320x240) NIST... FLIR E8 with Certificate Traceable to NIST ACCESSORIES T Pouch T Replacement battery T External battery charger T Car Charger T Power supply/charger with EU, UK, US and AU plugs T USB cable T Hard Transport Case 10-Year Detector Protection 5-Year Battery 2-Year Parts & Labor BOSTON PH: PORTLAND Corporate Headquarters CANADA FLIR Systems, Ltd. PH: MEXICO/LATIN AMERICA FLIR Systems Brasil Av. Antonio Bardella PH: Equipment described herein may require US Government authorization for export purposes. Diversion contrary to US law is prohibited. The images displayed may not be representative of the actual resolution of the camera shown. Specifications are subject to change without notice All rights reserved (Rev. 09/13) NASDAQ: FLIR

6 FLIR TG165 Spot Thermal Camera The FLIR TG165 Spot Thermal Camera bridges the gap between single spot infrared thermometers and FLIR s legendary thermal cameras. Equipped with FLIR s exclusive Lepton micro thermal sensor, the TG165 lets you see the heat so you know where to reliably measure it. Easily find unseen hot and cold spots for instant troubleshooting, and store images and data to show customers and include in reports. See the Heat - Speed Troubleshooting FLIR s Innovative Lepton IR Imaging Engine Instantly shows what s hot and where to aim Eliminates blind guesswork 24:1 spot size ratio for safer distance measuring Grab and Go Simplicity Fire It Up and Get to Work in Seconds Intuitive to operate with no special training required Easily save images and data for documentation Download images fast over USB or from removable micro SD Electrical Troubleshooting Warm Pipe in Wall Rugged and Reliable Designed for the Harshest Environments Built to withstand a 2 meter drop Covered by FLIR s exclusive 2-10 warranty Compact and durable to easily stow in a crowded tool bag Mechanical Overheating Refrigeration Issues

7 Imaging Specifications IR Temperature Measurement Basic Accuracy +/- 1.5% or 1.5 C Range -25 to 380 C, -13 to 716 F Emissivity 4 Pre-Set Levels with Custom Adjustment, 0.1 to 0.99 Dist. to Spot Ratio (D:S) 24:1 Measurement Resolution 0.1 C / F Response Time 150 Milliseconds Spectral Response 8 to 14μm Lasers Dual Diverging Lasers, Frames Temp Measurement Area Thermal Imaging Imaging Detector FLIR Lepton Microbolometer Focal Plane Array (FPA) Shutter Integrated Automatic Shutter Image Resolution (H x W) 4,800 Pixels (80 x 60) Spectral Response 8 to 14μm Field of View (H x W) 50 x 38.6 Upper Scene Range 127 C, 260 F (400K) Thermal Imaging Sensitivity 150mK Frame Rate 9 Hz Color Palettes 2 (Grey Scale, Hot Iron) Saved Image Format Bitmap (BMP) Image with Temperature and Emissivity General Unit Size (H x W x D) 7.3 x 2.2 x 3.7 in (186 x 55 x 94 mm) Display Type 2.0 in TFT LCD Display Resolution (W x H) 38,720 Pixels (176 x 220) Battery Rechargeable via Micro USB Lithium-ion Battery: 3.7V, 2600mAh Auto Power Off Yes, Adjustable with Disable Battery Life Hours Typical Use: Five 8-Hr Work Days; Continuous Use: 8 Hrs Certifications CE / CB / FCC / FDA Memory 8Gb Micro SD Card Operating Temperature -10 to 45 C, 14 to 113 F Drop Test Designed for 2 Meter, 6.5 Feet Tripod Mount 1/4 in - 20 on Handle Bottom Warranty 2 Years Product, and 10 Years Thermal Imaging Detector* Includes Lanyard, USB Cable, International Charger (US, UK, EU, AU, CN) 8 Gb Micro SD Card, Technical Documentation Ordering Information TG165 Spot Thermal Camera TA13 EVA Protective Case for TG165 TA14 Belt Holster for TG165 * When registered within 60 days of purchase. 9 Townsend West Nashua, NH USA PORTLAND Corporate Headquarters SW Parkway Ave. Wilsonville, OR USA NASDAQ: FLIR EUROPE FLIR Systems Luxemburgstraat Meer Belgium PH: +32 (0) CHINA FLIR Systems (Shanghai) Co.,Ltd. K , No 26 Lane 168, Daduhe Road, Putuo District, Shanghai , P.R.China PH : Equipment described herein may require US Government authorization for export purposes. Diversion contrary to US law is prohibited. Imagery for illustration purposes only. Specifications are subject to change without notice All rights reserved. (Rev. 11/15)

8 FLIR VP50 Non-Contact Voltage Detector + Flashlight The FLIR VP50 is a tough, CAT IV-rated Non-Contact Voltage Detector featuring a combination of alerts including tactile vibration, red LED alarms, and a powerful LED worklight so you ll never miss the presence of voltage even in dark or noisy areas. Engineered to reliably detect voltages on the latest tamperproof outlets and electrical systems installed using modern construction methods, the VP50 is useful when both working with safety outlets or detecting voltage in high powered equipment and low voltage systems. Rugged and Durable. Designed for long product life cycles 3m (9.8 ) drop tested Industry leading lifetime warranty with registration Robust pocket clip and screw on battery door Detect voltage quickly and easily High sensitivity mode for low voltage systems like doorbell transformers Enhanced Detection. Reliably detects voltage in the latest safety outlets Low-profile probe tip gets the sensor closer to electrical sources Enhanced sensitivity to help detect voltage in the latest safety outlets. Detect voltage in electrical systems in large industrial facilities, residential low voltage installations, and systems located behind obstructions (using High Sensitivity mode) Intelligent Design. Built to reduce chance of dropping, and to maximize battery life Anti-roll case with double molded sip resistant grip Vibration and Mult-color flashing LED alarms for voltage indication Lights on both sides: Bright LED flashlight on the back and convenient light on the tip for detection

9 Specifications Technical Summary Voltage Ranges Category Rating Frequency Range 90 to 1000V 24 to 1000V CAT IV-1000V 45-65Hz Drop Test 3m (9.8 ) Built-in Flashlight Vibrating Indication On/Off Switch Warranty Yes Yes Yes Limited Lifetime* Ordering Information VP50...CAT IV Vibrating Non-Contact Voltage Detector + Flashlight Vibrating voltage detection for loud industrial environments BOSTON 9 Townsend West Nashua, NH USA PORTLAND Corporate Headquarters SW Parkway Ave. Wilsonville, OR USA BELGIUM FLIR Commercial Systems AB Luxemburgstraat Meer Belgium PH: +32 (0) NASDAQ: FLIR CHINA FLIR Systems (Shanghai) Co.,Ltd. K , No.26 Lane 168, Daduhe Road, Putuo District, Shanghai ,P.R.China PH: Equipment described herein may require US Government authorization for export purposes. Diversion contrary to US law is prohibited. Imagery for illustration purposes only. Specifications are subject to change without notice All rights reserved. (Created 11/14)