Amplitude Modulation II

Size: px
Start display at page:

Download "Amplitude Modulation II"

Transcription

1 Lecture 6: Amplitude Modulation II EE 3770: Communication Systems Lecture 6 Amplitude Modulation II AM Limitations DSB-SC Modulation SSB Modulation VSB Modulation Multiplexing Mojtaba Vaezi 6-1

2 Contents AM Limitations DSB-SC Modulation SSB Modulation VSB Modulation Multiplexing Lecture 6: Amplitude Modulation II 6-2

3 AM Limitations Amplitude modulation is the oldest method of performing modulation. Advantages: AM s biggest advantage is the ease with which it is generated and reversed AM system is relatively inexpensive to build Disadvantages: AM is wasteful of power The carrier wave c(t) is completely independent of the message signal; its transmission therefore is a waste of power AM is wasteful of bandwidth Due to symmetry, the upper and lower sidebands of an AM wave are uniquely related, and the amplitude and phase of either sideband can be uniquely determined from the other sideband Lecture 6: Amplitude Modulation II 6-3

4 AM Modifications How to make AM more efficient? 1. Remove the carrier Double sideband-suppressed carrier (DSB-SC) 2. Transmit only one sideband Single sideband (SSB) Vestigial sideband (VSB) What is the cost? Increased system complexity and cost We trade off system complexity for improved utilization of communication resources. Lecture 6: Amplitude Modulation II 6-4

5 Contents AM Limitations DSB-SC Modulation SSB Modulation VSB Modulation Multiplexing Lecture 6: Amplitude Modulation II 6-5

6 DSB-SC Modulation Double sideband-suppressed carrier (DSB-SC) modulation consists of the product of the message signal and the carrier wave Considering the sinusoidal carrier wave c(t) = A c cos 2πf c t the DSB-SC wave thus can be described as follows: s(t) = A c m(t) cos 2πf c t S(f ) = A c 2 [M (f f c) + M (f + f c )] Lecture 6: Amplitude Modulation II 6-6

7 Check Yourself Question: Why did we have the carrier at all? Short answer: To avoid phase reversal! A DSB-SC modulated signal s(t) undergoes a phase reversal whenever the message signal crosses zero Thus, the envelope of a DSB-SC modulated signal is different from the message signal This means that simple demodulation using an envelope detection is not a viable option for DSB-SC modulation Lecture 6: Amplitude Modulation II 6-7

8 Check Yourself Question: Why did we have the carrier at all? Short answer: To avoid phase reversal! A DSB-SC modulated signal s(t) undergoes a phase reversal whenever the message signal crosses zero Thus, the envelope of a DSB-SC modulated signal is different from the message signal This means that simple demodulation using an envelope detection is not a viable option for DSB-SC modulation Lecture 6: Amplitude Modulation II 6-8

9 Ring Modulator How can we multiply (modulate) two waves? (a) Ring modulator (b) outer/inner diodes are on/off (c) outer/inner diodes are off/on Lecture 6: Amplitude Modulation II 6-9

10 Ring Modulator On one half-cycle of carrier: outer diodes are switched on (forward resistance r f ) On the other half-cycle: diodes operate in the opposite condition Lecture 6: Amplitude Modulation II 6-10

11 How can we demodulate DSB-SC? Synchronous Demodulation Synchronous demodulation is also called coherent detection or Why coherent? The receiver (demodulator) must know the carrier signal s both frequency (f c ) and phase (φ). v(t) = s(t) A c cos(ω c t + φ) = A c m(t) cos ω c t A c cos(ω c t + φ) = 1 2 A ca cm(t) cos φ A ca cm(t) cos(2ω c t + φ) Lecture 6: Amplitude Modulation II 6-11

12 Synchronous Demodulation Passing v(t) through a low pass filter yields v o (t) = 1 2 A ca c cos φ m(t) If φ is constant (but φ π ) the detector s output is an undistorted 2 version of the transmitted message. If φ changes with time, the detector s output will changed randomly in time, which is not desired we need another receiver (see Costas Receiver) Lecture 6: Amplitude Modulation II 6-12

13 Contents AM Limitations DSB-SC Modulation SSB Modulation VSB Modulation Multiplexing Lecture 6: Amplitude Modulation II 6-13

14 SSB Modulation DSB-SC improves the power efficiency (how?) but suffers from the spectral (bandwidth) efficiency Why DSB is not bandwidth efficient? Baseband message m(t) has a bandwidth of W while modulated message requires twice bandwidth (2W ) for transition Question: Any bandwidth efficient solutions? 1. Single-sideband (SSB) modulation: which removes either the LSB or the USB, i.e., transmits over bandwidth W 2. Quadrature amplitude modulation (QAM): which sends two messages over bandwidth 2W Lecture 6: Amplitude Modulation II 6-14

15 SSB Modulation Single-sideband (SSB): transmit only one sideband (either the LSB or the USB) Lecture 6: Amplitude Modulation II 6-15

16 SSB in Time Domain The upper sideband (USB) is the output of filtering signal m(t) with an ideal low pass filter H (f ) = 1, 0 f W 0, otherwise The modulated signal can be constructed by m USB (t) = m(t) cos ω c t m h (t) sin ω c t and m USB (t) = m(t) cos ω c t + m h (t) sin ω c t m(t) is the original real message signal, and m h (t) = m(t) 1 πt is the Hilbert transform of m(t) Lecture 6: Amplitude Modulation II 6-16

17 SSB in Time Domain m h (t) = m(t) 1 πt is the Hilbert transform of m(t) M h (f ) = M (f ) j sign(f) H (f ) = j sign(f) j = e π 2, f > 0 +j = e π 2, f < 0 Lecture 6: Amplitude Modulation II 6-17

18 Which Signals and Which SSB Sideband? SSB works satisfactorily for message with an energy gap centered around zero frequency (e.g., speech signal) Which SSB Sideband? Transmitter and receiver must agree on use of LSB vs. USB SSB is common for amateur radio Below 10 MHz: LSB Above 10 MHz: USB There are some exceptions SSB is also common for shortwave radio Lecture 6: Amplitude Modulation II 6-18

19 Contents AM Limitations DSB-SC Modulation SSB Modulation VSB Modulation Multiplexing Lecture 6: Amplitude Modulation II 6-19

20 Vestigial Sideband (VSB) Modulation - Motivation SSB relies on being able to filter out one sideband and keep the other For audio this is possible because the voice spectrum drops off below 300 Hz, allowing space for a transition band (see previous slide) This is not possible for other signals, like video, that have strong components at low frequencies (i.e., we will need an ideal filter) DSB-SC fits the characteristics of video but it is not bandwidth efficient To overcome these two practical limitations, we need a compromise method of modulation The solution is Vestigial Sideband (VSB) Modulation VSB is a compromise method of modulation that lies somewhere between SSB and DSB-SC in its spectral characteristics Lecture 6: Amplitude Modulation II 6-20

21 Vestigial Sideband Modulation (VSB) Vestigial Sideband (VSB) Modulation: a small portion (a vestige) of the unneeded sideband is used. This reduces DC distortion. B T = f v + W where f v is the vestige bandwidth and W is the message bandwidth. Typically, is 25% percent of W. VSB signals are generated using standard AM or DSB-SC modulation then passing modulated signal through a sideband shaping filter Demodulation uses either standard AM or DSB-SC demodulation, depending on whether or not a carrier tone is transmitted Lecture 6: Amplitude Modulation II 6-21

22 VSB in Commercial Systems VSB modulation with envelope detection is used to modulate image in analog TV signals. (The audio signal is modulated using FM.) Channel bandwidth for TV broadcasting in Northern America is 6MHz Thechoice of VSB for analog TV was influenced by Image signal has large BW with significant low frequency content The circuitry used for VSB is simple (envelope detection) than SBB VSB is also applied to digital signals for the same reasons digital TV signal Amplitude response for VSB modulated Lecture 6: Amplitude Modulation II 6-22

23 Quadrature Amplitude Modulation (QAM) DSB-SC modulates a message signal with bandwidth W to a transmitted signal with bandwidth 2W SSB reduces the transmitted bandwidth to W, but requires more complex modulator reduces SNR (for a fixed carrier amplitude) Quadrature amplitude modulation uses the 2W transmitter bandwidth to send two independent signals: QAM has the same spectral efficiency as SSB but it does not need sharp bandpass filters QAM is used in almost all digital communication methods, including telephone modems, cable TV, satellite TV Lecture 6: Amplitude Modulation II 6-23

24 QAM Modulator/Demodulator Two real messages: m 1 (t) and m 2 (t) m 1 (t) is modulated on a cosine and m 2 (t) is modulated on a sine Note that we need a synchronous receiver, or the two channels will interfere Question: What happens with a 90 phase shift at the receiver? Lecture 6: Amplitude Modulation II 6-24

25 Amplitude Modulation Summary Many different ways to encode information in amplitude AM DSB-SC AM SSB VSB QAM Common issues Synchronization Bandwidth Next: Encoding information in frequency or phase (FM, PM) Lecture 6: Amplitude Modulation II 6-25

26 Contents AM Limitations DSB-SC Modulation SSB Modulation VSB Modulation Multiplexing Lecture 6: Amplitude Modulation II 6-26

27 Frequency Division Multiplexing (FDM) Multiplexing is amother motivation for modulation Lecture 6: Amplitude Modulation II 6-27

28 Quadrature Carrier Multiplexing Quadrature amplitude modulation (QAM) is also called quadrature carrier is multiplexing. mulipex Lecture 6: Amplitude Modulation II 6-28

AM Limitations. Amplitude Modulation II. DSB-SC Modulation. AM Modifications

AM Limitations. Amplitude Modulation II. DSB-SC Modulation. AM Modifications Lecture 6: Amplitude Modulation II EE 3770: Communication Systems AM Limitations AM Limitations DSB-SC Modulation SSB Modulation VSB Modulation Lecture 6 Amplitude Modulation II Amplitude modulation is

More information

Amplitude Modulation, II

Amplitude Modulation, II Amplitude Modulation, II Single sideband modulation (SSB) Vestigial sideband modulation (VSB) VSB spectrum Modulator and demodulator NTSC TV signsals Quadrature modulation Spectral efficiency Modulator

More information

Outline. Communications Engineering 1

Outline. Communications Engineering 1 Outline Introduction Signal, random variable, random process and spectra Analog modulation Analog to digital conversion Digital transmission through baseband channels Signal space representation Optimal

More information

Amplitude Modulation Chapter 2. Modulation process

Amplitude Modulation Chapter 2. Modulation process Question 1 Modulation process Modulation is the process of translation the baseband message signal to bandpass (modulated carrier) signal at frequencies that are very high compared to the baseband frequencies.

More information

Code No: R Set No. 1

Code No: R Set No. 1 Code No: R05220405 Set No. 1 II B.Tech II Semester Regular Examinations, Apr/May 2007 ANALOG COMMUNICATIONS ( Common to Electronics & Communication Engineering and Electronics & Telematics) Time: 3 hours

More information

Amplitude Modulated Systems

Amplitude Modulated Systems Amplitude Modulated Systems Communication is process of establishing connection between two points for information exchange. Channel refers to medium through which message travels e.g. wires, links, or

More information

B.Tech II Year II Semester (R13) Supplementary Examinations May/June 2017 ANALOG COMMUNICATION SYSTEMS (Electronics and Communication Engineering)

B.Tech II Year II Semester (R13) Supplementary Examinations May/June 2017 ANALOG COMMUNICATION SYSTEMS (Electronics and Communication Engineering) Code: 13A04404 R13 B.Tech II Year II Semester (R13) Supplementary Examinations May/June 2017 ANALOG COMMUNICATION SYSTEMS (Electronics and Communication Engineering) Time: 3 hours Max. Marks: 70 PART A

More information

Modulations Analog Modulations Amplitude modulation (AM) Linear modulation Frequency modulation (FM) Phase modulation (PM) cos Angle modulation FM PM Digital Modulations ASK FSK PSK MSK MFSK QAM PAM Etc.

More information

Speech, music, images, and video are examples of analog signals. Each of these signals is characterized by its bandwidth, dynamic range, and the

Speech, music, images, and video are examples of analog signals. Each of these signals is characterized by its bandwidth, dynamic range, and the Speech, music, images, and video are examples of analog signals. Each of these signals is characterized by its bandwidth, dynamic range, and the nature of the signal. For instance, in the case of audio

More information

(b) What are the differences between FM and PM? (c) What are the differences between NBFM and WBFM? [9+4+3]

(b) What are the differences between FM and PM? (c) What are the differences between NBFM and WBFM? [9+4+3] Code No: RR220401 Set No. 1 1. (a) The antenna current of an AM Broadcast transmitter is 10A, if modulated to a depth of 50% by an audio sine wave. It increases to 12A as a result of simultaneous modulation

More information

Introduction to Amplitude Modulation

Introduction to Amplitude Modulation 1 Introduction to Amplitude Modulation Introduction to project management. Problem definition. Design principles and practices. Implementation techniques including circuit design, software design, solid

More information

Charan Langton, Editor

Charan Langton, Editor Charan Langton, Editor SIGNAL PROCESSING & SIMULATION NEWSLETTER Baseband, Passband Signals and Amplitude Modulation The most salient feature of information signals is that they are generally low frequency.

More information

UNIT I AMPLITUDE MODULATION

UNIT I AMPLITUDE MODULATION UNIT I AMPLITUDE MODULATION Prepared by: S.NANDHINI, Assistant Professor, Dept. of ECE, Sri Venkateswara College of Engineering, Sriperumbudur, Tamilnadu. CONTENTS Introduction to communication systems

More information

3.1 Introduction 3.2 Amplitude Modulation 3.3 Double Sideband-Suppressed Carrier Modulation 3.4 Quadrature-Carrier Multiplexing 3.

3.1 Introduction 3.2 Amplitude Modulation 3.3 Double Sideband-Suppressed Carrier Modulation 3.4 Quadrature-Carrier Multiplexing 3. Chapter 3 Amplitude Modulation Wireless Information Transmission System Lab. Institute of Communications Engineering g National Sun Yat-sen University Outline 3.1 Introduction 3. Amplitude Modulation 3.3

More information

AM and FM MODULATION Lecture 5&6

AM and FM MODULATION Lecture 5&6 AM and FM MODULATION Lecture 5&6 Ir. Muhamad Asvial, MEng., PhD Center for Information and Communication Engineering Research Electrical Engineering Department University of Indonesia Kampus UI Depok,

More information

Communication Channels

Communication Channels Communication Channels wires (PCB trace or conductor on IC) optical fiber (attenuation 4dB/km) broadcast TV (50 kw transmit) voice telephone line (under -9 dbm or 110 µw) walkie-talkie: 500 mw, 467 MHz

More information

Problems from the 3 rd edition

Problems from the 3 rd edition (2.1-1) Find the energies of the signals: a) sin t, 0 t π b) sin t, 0 t π c) 2 sin t, 0 t π d) sin (t-2π), 2π t 4π Problems from the 3 rd edition Comment on the effect on energy of sign change, time shifting

More information

4- Single Side Band (SSB)

4- Single Side Band (SSB) 4- Single Side Band (SSB) It can be shown that: s(t) S.S.B = m(t) cos ω c t ± m h (t) sin ω c t -: USB ; +: LSB m(t) X m(t) cos ω c t -π/ cos ω c t -π/ + s S.S.B m h (t) X m h (t) ± sin ω c t 1 Tone Modulation:

More information

UNIT-I AMPLITUDE MODULATION (2 Marks Questions and Answers)

UNIT-I AMPLITUDE MODULATION (2 Marks Questions and Answers) UNIT-I AMPLITUDE MODULATION (2 Marks Questions and Answers) 1. Define modulation? Modulation is a process by which some characteristics of high frequency carrier Signal is varied in accordance with the

More information

Chapter 3: Analog Modulation Cengage Learning Engineering. All Rights Reserved.

Chapter 3: Analog Modulation Cengage Learning Engineering. All Rights Reserved. Contemporary Communication Systems using MATLAB Chapter 3: Analog Modulation 2013 Cengage Learning Engineering. All Rights Reserved. 3.1 Preview In this chapter we study analog modulation & demodulation,

More information

Wireless Communication Fading Modulation

Wireless Communication Fading Modulation EC744 Wireless Communication Fall 2008 Mohamed Essam Khedr Department of Electronics and Communications Wireless Communication Fading Modulation Syllabus Tentatively Week 1 Week 2 Week 3 Week 4 Week 5

More information

Amplitude Modulation. Ahmad Bilal

Amplitude Modulation. Ahmad Bilal Amplitude Modulation Ahmad Bilal 5-2 ANALOG AND DIGITAL Analog-to-analog conversion is the representation of analog information by an analog signal. Topics discussed in this section: Amplitude Modulation

More information

Master Degree in Electronic Engineering

Master Degree in Electronic Engineering Master Degree in Electronic Engineering Analog and telecommunication electronic course (ATLCE-01NWM) Miniproject: Baseband signal transmission techniques Name: LI. XINRUI E-mail: s219989@studenti.polito.it

More information

3.1 Introduction to Modulation

3.1 Introduction to Modulation Haberlesme Sistemlerine Giris (ELE 361) 9 Eylul 2017 TOBB Ekonomi ve Teknoloji Universitesi, Guz 2017-18 Dr. A. Melda Yuksel Turgut & Tolga Girici Lecture Notes Chapter 3 Amplitude Modulation Speech, music,

More information

Vestigial Sideband Modulation KEEE343 Communication Theory Lecture #11, April 7, Prof. Young-Chai Ko

Vestigial Sideband Modulation KEEE343 Communication Theory Lecture #11, April 7, Prof. Young-Chai Ko Vestigial Sideband Modulation KEEE343 Communication Theory Lecture #11, April 7, 2011 Prof. Young-Chai Ko koyc@korea.ac.kr Summary Vestigial sideband modulation Baseband representation of modulated wave

More information

Communications and Signals Processing

Communications and Signals Processing Communications and Signals Processing Department of Communications An Najah National University 2012/2013 1 3.1 Amplitude Modulation 3.2 Virtues, Limitations, and Modifications of Amplitude Modulation

More information

COMM 601: Modulation I

COMM 601: Modulation I Prof. Ahmed El-Mahdy, Communications Department The German University in Cairo Text Books [1] Couch, Digital and Analog Communication Systems, 7 th edition, Prentice Hall, 2007. [2] Simon Haykin, Communication

More information

EE4512 Analog and Digital Communications Chapter 6. Chapter 6 Analog Modulation and Demodulation

EE4512 Analog and Digital Communications Chapter 6. Chapter 6 Analog Modulation and Demodulation Chapter 6 Analog Modulation and Demodulation Chapter 6 Analog Modulation and Demodulation Amplitude Modulation Pages 306-309 309 The analytical signal for double sideband, large carrier amplitude modulation

More information

CHAPTER 2! AMPLITUDE MODULATION (AM)

CHAPTER 2! AMPLITUDE MODULATION (AM) CHAPTER 2 AMPLITUDE MODULATION (AM) Topics 2-1 : AM Concepts 2-2 : Modulation Index and Percentage of Modulation 2-3 : Sidebands and the Frequency Domain 2-4 : Single-Sideband Modulation 2-5 : AM Power

More information

ELEC 350 Communications Theory and Systems: I. Review. ELEC 350 Fall

ELEC 350 Communications Theory and Systems: I. Review. ELEC 350 Fall ELEC 350 Communications Theory and Systems: I Review ELEC 350 Fall 007 1 Final Examination Saturday, December 15-3 hours Two pages of notes allowed Calculator Tables provided Fourier transforms Table.1

More information

Introduction. Amplitude Modulation System Angle Modulation System

Introduction. Amplitude Modulation System Angle Modulation System Introduction Amplitude Modulation System Angle Modulation System Frequency Modulation Phase Modulation Digital Communication Elements of Information Theory Advanced Communication Techniques 1 Tools for

More information

Chapter 5. Amplitude Modulation

Chapter 5. Amplitude Modulation Chapter 5 Amplitude Modulation So far we have developed basic signal and system representation techniques which we will now apply to the analysis of various analog communication systems. In particular,

More information

Angle Modulated Systems

Angle Modulated Systems Angle Modulated Systems Angle of carrier signal is changed in accordance with instantaneous amplitude of modulating signal. Two types Frequency Modulation (FM) Phase Modulation (PM) Use Commercial radio

More information

! Amplitude of carrier wave varies a mean value in step with the baseband signal m(t)

! Amplitude of carrier wave varies a mean value in step with the baseband signal m(t) page 7.1 CHAPTER 7 AMPLITUDE MODULATION Transmit information-bearing (message) or baseband signal (voice-music) through a Communications Channel Baseband = band of frequencies representing the original

More information

Chapter 3. Amplitude Modulation Fundamentals

Chapter 3. Amplitude Modulation Fundamentals Chapter 3 Amplitude Modulation Fundamentals Topics Covered 3-1: AM Concepts 3-2: Modulation Index and Percentage of Modulation 3-3: Sidebands and the Frequency Domain 3-4: AM Power 3-5: Single-Sideband

More information

Amplitude Modulation Fundamentals

Amplitude Modulation Fundamentals 3 chapter Amplitude Modulation Fundamentals In the modulation process, the baseband voice, video, or digital signal modifies another, higher-frequency signal called the carrier, which is usually a sine

More information

Amplitude Modulation. Amplitude Modulation. Amplitude Modulation. Amplitude Modulation. A. Introduction. A. Introduction

Amplitude Modulation. Amplitude Modulation. Amplitude Modulation. Amplitude Modulation. A. Introduction. A. Introduction 1. In AM modulation we impart the information of a message signal m(t) on to a sinusoidal carrier c(t). This results in the translation of the message signal to a new frequency range. The motivation for

More information

CS311: Data Communication. Transmission of Analog Signal - I

CS311: Data Communication. Transmission of Analog Signal - I CS311: Data Communication Transmission of Analog Signal - I by Dr. Manas Khatua Assistant Professor Dept. of CSE IIT Jodhpur E-mail: manaskhatua@iitj.ac.in Web: http://home.iitj.ac.in/~manaskhatua http://manaskhatua.github.io/

More information

Elements of Communication System Channel Fig: 1: Block Diagram of Communication System Terminology in Communication System

Elements of Communication System Channel Fig: 1: Block Diagram of Communication System Terminology in Communication System Content:- Fundamentals of Communication Engineering : Elements of a Communication System, Need of modulation, electromagnetic spectrum and typical applications, Unit V (Communication terminologies in communication

More information

TSEK02: Radio Electronics Lecture 2: Modulation (I) Ted Johansson, EKS, ISY

TSEK02: Radio Electronics Lecture 2: Modulation (I) Ted Johansson, EKS, ISY TSEK02: Radio Electronics Lecture 2: Modulation (I) Ted Johansson, EKS, ISY An Overview of Modulation Techniques: chapter 3.1 3.3.1 2 Introduction (3.1) Analog Modulation Amplitude Modulation Phase and

More information

Dr. Md. Farhad Hossain Associate Professor Department of EEE, BUET

Dr. Md. Farhad Hossain Associate Professor Department of EEE, BUET EEE 309 Communiation Theory Semester: January 06 Dr. Md. Farhad Hossain Assoiate Proessor Department o EEE, BUET Email: marhadhossain@eee.buet.a.bd Oie: ECE 33, ECE Building Part 03-3 Single-sideband Suppressed

More information

TSEK02: Radio Electronics Lecture 2: Modulation (I) Ted Johansson, EKS, ISY

TSEK02: Radio Electronics Lecture 2: Modulation (I) Ted Johansson, EKS, ISY TSEK02: Radio Electronics Lecture 2: Modulation (I) Ted Johansson, EKS, ISY 2 Basic Definitions Time and Frequency db conversion Power and dbm Filter Basics 3 Filter Filter is a component with frequency

More information

ANALOGUE TRANSMISSION OVER FADING CHANNELS

ANALOGUE TRANSMISSION OVER FADING CHANNELS J.P. Linnartz EECS 290i handouts Spring 1993 ANALOGUE TRANSMISSION OVER FADING CHANNELS Amplitude modulation Various methods exist to transmit a baseband message m(t) using an RF carrier signal c(t) =

More information

Chapter 7. Multiple Division Techniques

Chapter 7. Multiple Division Techniques Chapter 7 Multiple Division Techniques 1 Outline Frequency Division Multiple Access (FDMA) Division Multiple Access (TDMA) Code Division Multiple Access (CDMA) Comparison of FDMA, TDMA, and CDMA Walsh

More information

EEM 306 Introduction to Communications

EEM 306 Introduction to Communications EEM 306 Introduction to Communications Lecture 5 Department o Electrical and Electronics Engineering Anadolu University April 8, 2014 Lecture 5 1/20 Last Time Bandpass Systems Phase and Group Delay Introduction

More information

DT Filters 2/19. Atousa Hajshirmohammadi, SFU

DT Filters 2/19. Atousa Hajshirmohammadi, SFU 1/19 ENSC380 Lecture 23 Objectives: Signals and Systems Fourier Analysis: Discrete Time Filters Analog Communication Systems Double Sideband, Sub-pressed Carrier Modulation (DSBSC) Amplitude Modulation

More information

Faculty of Engineering Electrical Engineering Department Communication Engineering I Lab (EELE 3170) Eng. Adam M. Hammad

Faculty of Engineering Electrical Engineering Department Communication Engineering I Lab (EELE 3170) Eng. Adam M. Hammad Faculty of Engineering Electrical Engineering Department Communication Engineering I Lab (EELE 3170) Eng. Adam M. Hammad EXPERIMENT #5 DSB-SC AND SSB MODULATOR Theory The amplitude-modulated signal is

More information

Problem Sheet for Amplitude Modulation

Problem Sheet for Amplitude Modulation Problem heet for Amplitude Modulation Q1: For the sinusoidaly modulated DB/LC waveform shown in Fig. below. a Find the modulation index. b ketch a line spectrum. c Calculated the ratio of average power

More information

Communication Engineering Prof. Surendra Prasad Department of Electrical Engineering Indian Institute of Technology, Delhi

Communication Engineering Prof. Surendra Prasad Department of Electrical Engineering Indian Institute of Technology, Delhi Communication Engineering Prof. Surendra Prasad Department of Electrical Engineering Indian Institute of Technology, Delhi Lecture - 10 Single Sideband Modulation We will discuss, now we will continue

More information

Chapter 7 Single-Sideband Modulation (SSB) and Frequency Translation

Chapter 7 Single-Sideband Modulation (SSB) and Frequency Translation Chapter 7 Single-Sideband Modulation (SSB) and Frequency Translation Contents Slide 1 Single-Sideband Modulation Slide 2 SSB by DSBSC-AM and Filtering Slide 3 SSB by DSBSC-AM and Filtering (cont.) Slide

More information

Modulation is the process of impressing a low-frequency information signal (baseband signal) onto a higher frequency carrier signal

Modulation is the process of impressing a low-frequency information signal (baseband signal) onto a higher frequency carrier signal Modulation is the process of impressing a low-frequency information signal (baseband signal) onto a higher frequency carrier signal Modulation is a process of mixing a signal with a sinusoid to produce

More information

EE3723 : Digital Communications

EE3723 : Digital Communications EE3723 : Digital Communications Week 8-9: Bandpass Modulation MPSK MASK, OOK MFSK 04-May-15 Muhammad Ali Jinnah University, Islamabad - Digital Communications - EE3723 1 In-phase and Quadrature (I&Q) Representation

More information

ECE5713 : Advanced Digital Communications

ECE5713 : Advanced Digital Communications ECE5713 : Advanced Digital Communications Bandpass Modulation MPSK MASK, OOK MFSK 04-May-15 Advanced Digital Communications, Spring-2015, Week-8 1 In-phase and Quadrature (I&Q) Representation Any bandpass

More information

Amplitude Modulation

Amplitude Modulation Amplitude Modulation Ang Man Shun October 30, 01 Reference Hwei P. Hsu Analog and Digital Communication Summary Message Carrier Simple AM DSB-LC DSB-SC SSB / VSB Equation m(t) Large Carrier Unity A m cos

More information

ENSC327 Communications Systems 4. Double Sideband Modulation. Jie Liang School of Engineering Science Simon Fraser University

ENSC327 Communications Systems 4. Double Sideband Modulation. Jie Liang School of Engineering Science Simon Fraser University ENSC327 Communiations Systems 4. Double Sideband Modulation Jie Liang Shool of Engineering Siene Simon Fraser University 1 Outline DSB: Modulator Spetrum Coherent Demodulator: Three methods Quadrature-arrier

More information

Amplitude Modulation Early Radio EE 442 Spring Semester Lecture 6

Amplitude Modulation Early Radio EE 442 Spring Semester Lecture 6 Amplitude Modulation Early Radio EE 442 Spring Semester Lecture 6 f f f LO audio baseband m http://www.technologyuk.net/telecommunications/telecom_principles/amplitude_modulation.shtml AM Modulation --

More information

S.E. (Electronics/Electronics and Telecommunication Engg.) (Second Semester) EXAMINATION, 2014 COMMUNICATION THEORY (2008 PATTERN)

S.E. (Electronics/Electronics and Telecommunication Engg.) (Second Semester) EXAMINATION, 2014 COMMUNICATION THEORY (2008 PATTERN) Total No. of Questions 12] [Total No. of Printed Pages 7 Seat No. [4657]-49 S.E. (Electronics/Electronics and Telecommunication Engg.) (Second Semester) EXAMINATION, 2014 COMMUNICATION THEORY (2008 PATTERN)

More information

Chapter 7 Multiple Division Techniques for Traffic Channels

Chapter 7 Multiple Division Techniques for Traffic Channels Introduction to Wireless & Mobile Systems Chapter 7 Multiple Division Techniques for Traffic Channels Outline Introduction Concepts and Models for Multiple Divisions Frequency Division Multiple Access

More information

Lecture 15. Signal Transmission Radio Spectrum. Duplexing Channel Sharing or Multiplexing Modulation. Elec 1200

Lecture 15. Signal Transmission Radio Spectrum. Duplexing Channel Sharing or Multiplexing Modulation. Elec 1200 Signal Transmission- Modulation Lecture 15 Signal Transmission Radio Spectrum Multiple Users Duplexing Channel Sharing or Multiplexing Modulation Elec 1200 Signal Transmission In a communications system

More information

Lecture-3 Amplitude Modulation: Single Side Band (SSB) Modulation

Lecture-3 Amplitude Modulation: Single Side Band (SSB) Modulation Lecture-3 Amplitude Modulation: Single Side Band (SSB) Modulation 3.0 Introduction. 3.1 Baseband Signal SSB Modulation. 3.1.1 Frequency Domain Description. 3.1. Time Domain Description. 3. Single Tone

More information

1B Paper 6: Communications Handout 2: Analogue Modulation

1B Paper 6: Communications Handout 2: Analogue Modulation 1B Paper 6: Communications Handout : Analogue Modulation Ramji Venkataramanan Signal Processing and Communications Lab Department of Engineering ramji.v@eng.cam.ac.uk Lent Term 16 1 / 3 Modulation Modulation

More information

Twelve voice signals, each band-limited to 3 khz, are frequency -multiplexed using 1 khz guard bands between channels and between the main carrier

Twelve voice signals, each band-limited to 3 khz, are frequency -multiplexed using 1 khz guard bands between channels and between the main carrier Twelve voice signals, each band-limited to 3 khz, are frequency -multiplexed using 1 khz guard bands between channels and between the main carrier and the first channel. The modulation of the main carrier

More information

CSCD 433 Network Programming Fall Lecture 5 Physical Layer Continued

CSCD 433 Network Programming Fall Lecture 5 Physical Layer Continued CSCD 433 Network Programming Fall 2016 Lecture 5 Physical Layer Continued 1 Topics Definitions Analog Transmission of Digital Data Digital Transmission of Analog Data Multiplexing 2 Different Types of

More information

EXPERIMENT WISE VIVA QUESTIONS

EXPERIMENT WISE VIVA QUESTIONS EXPERIMENT WISE VIVA QUESTIONS Pulse Code Modulation: 1. Draw the block diagram of basic digital communication system. How it is different from analog communication system. 2. What are the advantages of

More information

Analog Communication.

Analog Communication. Analog Communication Vishnu N V Tele is Greek for at a distance, and Communicare is latin for to make common. Telecommunication is the process of long distance communications. Early telecommunications

More information

Lecture 12 - Analog Communication (II)

Lecture 12 - Analog Communication (II) Lecture 12 - Analog Communication (II) James Barnes (James.Barnes@colostate.edu) Spring 2014 Colorado State University Dept of Electrical and Computer Engineering ECE423 1 / 12 Outline QAM: quadrature

More information

EE390 Final Exam Fall Term 2002 Friday, December 13, 2002

EE390 Final Exam Fall Term 2002 Friday, December 13, 2002 Name Page 1 of 11 EE390 Final Exam Fall Term 2002 Friday, December 13, 2002 Notes 1. This is a 2 hour exam, starting at 9:00 am and ending at 11:00 am. The exam is worth a total of 50 marks, broken down

More information

EC2252: COMMUNICATION THEORY SEM / YEAR: II year DEPARTMENT OF ELECTRONICS AND COMMUNICATION ENGINEERING

EC2252: COMMUNICATION THEORY SEM / YEAR: II year DEPARTMENT OF ELECTRONICS AND COMMUNICATION ENGINEERING EC2252: COMMUNICATION THEORY SEM / YEAR: II year DEPARTMENT OF ELECTRONICS AND COMMUNICATION ENGINEERING QUESTION BANK SUBJECT CODE : EC2252 SEM / YEAR : II year SUBJECT NAME : COMMUNICATION THEORY UNIT

More information

CSCD 433 Network Programming Fall Lecture 5 Physical Layer Continued

CSCD 433 Network Programming Fall Lecture 5 Physical Layer Continued CSCD 433 Network Programming Fall 2016 Lecture 5 Physical Layer Continued 1 Topics Definitions Analog Transmission of Digital Data Digital Transmission of Analog Data Multiplexing 2 Different Types of

More information

ANALOG (DE)MODULATION

ANALOG (DE)MODULATION ANALOG (DE)MODULATION Amplitude Modulation with Large Carrier Amplitude Modulation with Suppressed Carrier Quadrature Modulation Injection to Intermediate Frequency idealized system Software Receiver Design

More information

Digital Communication

Digital Communication Digital Communication (ECE4058) Electronics and Communication Engineering Hanyang University Haewoon Nam Lecture 1 1 Digital Band Pass Modulation echnique Digital and-pass modulation techniques Amplitude-shift

More information

COMMUNICATION SYSTEMS-II (In continuation with Part-I)

COMMUNICATION SYSTEMS-II (In continuation with Part-I) MODULATING A SIGNAL COMMUNICATION SYSTEMS-II (In continuation with Part-I) TRANSMITTING SIGNALS : In order to transmit the original low frequency baseband message efficiently over long distances, the signal

More information

Real and Complex Modulation

Real and Complex Modulation Real and Complex Modulation TIPL 4708 Presented by Matt Guibord Prepared by Matt Guibord 1 What is modulation? Modulation is the act of changing a carrier signal s properties (amplitude, phase, frequency)

More information

Signals and codes. Path and modulation

Signals and codes. Path and modulation Signals and codes Path and modulation Communication system The goal is to transfer a status message from source to destination. Signal quality is decreased by channel noise / interference Transferred message

More information

Lecture 6. Angle Modulation and Demodulation

Lecture 6. Angle Modulation and Demodulation Lecture 6 and Demodulation Agenda Introduction to and Demodulation Frequency and Phase Modulation Angle Demodulation FM Applications Introduction The other two parameters (frequency and phase) of the carrier

More information

S.R.M. Institute of Science & Technology School of Electronics & Communication Engineering

S.R.M. Institute of Science & Technology School of Electronics & Communication Engineering S.R.M. Institute of Science & Technology School of Electronics & Communication Engineering QUESTION BANK Subject Code : EC314 Subject Name : Communication Engineering Year & Sem : III Year, 6th Sem (EEE)

More information

(Refer Slide Time: 2:23)

(Refer Slide Time: 2:23) Data Communications Prof. A. Pal Department of Computer Science & Engineering Indian Institute of Technology, Kharagpur Lecture-11B Multiplexing (Contd.) Hello and welcome to today s lecture on multiplexing

More information

ANALOG COMMUNICATIONS. BY P.Swetha, Assistant Professor (Units 1, 2 & 5) K.D.K.Ajay, Assistant Professor (Units 3 & 4)

ANALOG COMMUNICATIONS. BY P.Swetha, Assistant Professor (Units 1, 2 & 5) K.D.K.Ajay, Assistant Professor (Units 3 & 4) ANALOG COMMUNICATIONS BY P.Swetha, Assistant Professor (Units 1, 2 & 5) K.D.K.Ajay, Assistant Professor (Units 3 & 4) (R15A0409) ANALOG COMMUNICATIONS Course Objectives: Objective of the course is to:

More information

Digital Modulation Lecture 01. Review of Analogue Modulation Introduction to Digital Modulation Techniques Richard Harris

Digital Modulation Lecture 01. Review of Analogue Modulation Introduction to Digital Modulation Techniques Richard Harris Digital Modulation Lecture 01 Review of Analogue Modulation Introduction to Digital Modulation Techniques Richard Harris Objectives You will be able to: Classify the various approaches to Analogue Modulation

More information

4.1 REPRESENTATION OF FM AND PM SIGNALS An angle-modulated signal generally can be written as

4.1 REPRESENTATION OF FM AND PM SIGNALS An angle-modulated signal generally can be written as 1 In frequency-modulation (FM) systems, the frequency of the carrier f c is changed by the message signal; in phase modulation (PM) systems, the phase of the carrier is changed according to the variations

More information

Objectives. Presentation Outline. Digital Modulation Lecture 01

Objectives. Presentation Outline. Digital Modulation Lecture 01 Digital Modulation Lecture 01 Review of Analogue Modulation Introduction to Digital Modulation Techniques Richard Harris Objectives You will be able to: Classify the various approaches to Analogue Modulation

More information

EE 460L University of Nevada, Las Vegas ECE Department

EE 460L University of Nevada, Las Vegas ECE Department EE 460L PREPARATION 1- ASK Amplitude shift keying - ASK - in the context of digital communications is a modulation process which imparts to a sinusoid two or more discrete amplitude levels. These are related

More information

DEPARTMENT OF COMPUTER GCE@Bodi_ SCIENCE GCE@Bodi_ AND ENIGNEERING GCE@Bodi_ GCE@Bodi_ GCE@Bodi_ Analog and Digital Communication GCE@Bodi_ DEPARTMENT OF CsE Subject Name: Analog and Digital Communication

More information

CHAPTER 2. Instructor: Mr. Abhijit Parmar Course: Mobile Computing and Wireless Communication ( )

CHAPTER 2. Instructor: Mr. Abhijit Parmar Course: Mobile Computing and Wireless Communication ( ) CHAPTER 2 Instructor: Mr. Abhijit Parmar Course: Mobile Computing and Wireless Communication (2170710) Syllabus Chapter-2.3 Modulation Techniques Reasons for Choosing Encoding Techniques Digital data,

More information

Principles of Communications ECS 332

Principles of Communications ECS 332 Principles of Communications ECS 332 Asst. Prof. Dr. Prapun Suksompong prapun@siit.tu.ac.th 5. Angle Modulation Office Hours: BKD, 6th floor of Sirindhralai building Wednesday 4:3-5:3 Friday 4:3-5:3 Example

More information

Signals and Systems Lecture 9 Communication Systems Frequency-Division Multiplexing and Frequency Modulation (FM)

Signals and Systems Lecture 9 Communication Systems Frequency-Division Multiplexing and Frequency Modulation (FM) Signals and Systems Lecture 9 Communication Systems Frequency-Division Multiplexing and Frequency Modulation (FM) April 11, 2008 Today s Topics 1. Frequency-division multiplexing 2. Frequency modulation

More information

CHAPTER 2 DIGITAL MODULATION

CHAPTER 2 DIGITAL MODULATION 2.1 INTRODUCTION CHAPTER 2 DIGITAL MODULATION Referring to Equation (2.1), if the information signal is digital and the amplitude (lv of the carrier is varied proportional to the information signal, a

More information

70cm & Microwave Amateur TV Frequencies Jim Andrews, KH6HTV

70cm & Microwave Amateur TV Frequencies Jim Andrews, KH6HTV AppNote10a-TVfreqs.doc (kh6htv, 10/31/2014) p. 1 of 5 Application Note AN-10a copyright - Nov. 2011 rev. - Oct. 2014 70cm & Microwave Amateur TV Frequencies Jim Andrews, KH6HTV www.kh6htv.com Licensed

More information

ENSC327 Communications Systems 14: Multiplexing. School of Engineering Science Simon Fraser University

ENSC327 Communications Systems 14: Multiplexing. School of Engineering Science Simon Fraser University ENSC327 Communications Systems 14: Multiplexing School of Engineering Science Simon Fraser University 1 Outline Required background (Recall various modulation schemes) Different Multiplexing strategies:

More information

( ) D. An information signal x( t) = 5cos( 1000πt) LSSB modulates a carrier with amplitude A c

( ) D. An information signal x( t) = 5cos( 1000πt) LSSB modulates a carrier with amplitude A c An inormation signal x( t) 5cos( 1000πt) LSSB modulates a carrier with amplitude A c 1. This signal is transmitted through a channel with 30 db loss. It is demodulated using a synchronous demodulator.

More information

Downloaded from 1

Downloaded from  1 VII SEMESTER FINAL EXAMINATION-2004 Attempt ALL questions. Q. [1] How does Digital communication System differ from Analog systems? Draw functional block diagram of DCS and explain the significance of

More information

Communications IB Paper 6 Handout 2: Analogue Modulation

Communications IB Paper 6 Handout 2: Analogue Modulation Communications IB Paper 6 Handout 2: Analogue Modulation Jossy Sayir Signal Processing and Communications Lab Department of Engineering University of Cambridge jossy.sayir@eng.cam.ac.uk Lent Term c Jossy

More information

ANALOG COMMUNICATION

ANALOG COMMUNICATION ANALOG COMMUNICATION TRAINING LAB Analog Communication Training Lab consists of six kits, one each for Modulation (ACL-01), Demodulation (ACL-02), Modulation (ACL-03), Demodulation (ACL-04), Noise power

More information

Communication Systems Lecture 7. Dong In Kim School of Info/Comm Engineering Sungkyunkwan University

Communication Systems Lecture 7. Dong In Kim School of Info/Comm Engineering Sungkyunkwan University Communiation Systems Leture 7 Dong In Kim Shool o Ino/Comm Engineering Sungkyunkwan University 1 Outline Expression o SSB signals Waveorm o SSB signals Modulators or SSB: Frequeny disrimination Phase disrimination

More information

EE140 Introduction to Communication Systems Lecture 7

EE140 Introduction to Communication Systems Lecture 7 3/4/08 EE40 Introdution to Communiation Systems Leture 7 Instrutor: Prof. Xiliang Luo ShanghaiTeh University, Spring 08 Arhiteture of a (Digital) Communiation System Transmitter Soure A/D onverter Soure

More information

Internal Examination I Answer Key DEPARTMENT OF CSE & IT. Semester: III Max.Marks: 100

Internal Examination I Answer Key DEPARTMENT OF CSE & IT. Semester: III Max.Marks: 100 NH 67, Karur Trichy Highways, Puliyur C.F, 639 114 Karur District Internal Examination I Answer Key DEPARTMENT OF CSE & IT Branch & Section: II CSE & IT Date & Time: 06.08.15 & 3 Hours Semester: III Max.Marks:

More information

KINGS COLLEGE OF ENGINEERING DEPARTMENT OF ELECTRONICS AND COMMUNICATION ENGINEERING QUESTION BANK

KINGS COLLEGE OF ENGINEERING DEPARTMENT OF ELECTRONICS AND COMMUNICATION ENGINEERING QUESTION BANK KINGS COLLEGE OF ENGINEERING DEPARTMENT OF ELECTRONICS AND COMMUNICATION ENGINEERING QUESTION BANK SUB.NAME : COMMUNICATION THEORY SUB.CODE: EC1252 YEAR : II SEMESTER : IV UNIT I AMPLITUDE MODULATION SYSTEMS

More information

Part A: Question & Answers UNIT I AMPLITUDE MODULATION

Part A: Question & Answers UNIT I AMPLITUDE MODULATION PANDIAN SARASWATHI YADAV ENGINEERING COLLEGE DEPARTMENT OF ELECTRONICS & COMMUNICATON ENGG. Branch: ECE EC6402 COMMUNICATION THEORY Semester: IV Part A: Question & Answers UNIT I AMPLITUDE MODULATION 1.

More information

6. Modulation and Multiplexing Techniques

6. Modulation and Multiplexing Techniques 6. Modulation and Multiplexing Techniques The quality of analog transmission is S/N (signal to noise ratio). signal power S/N = ---------------------------- baseband noise power S/N can be greater than

More information

ENSC327 Communications Systems 4. Double Sideband Modulation. School of Engineering Science Simon Fraser University

ENSC327 Communications Systems 4. Double Sideband Modulation. School of Engineering Science Simon Fraser University ENSC327 Communiations Systems 4. Double Sideband Modulation Shool of Engineering Siene Simon Fraser University 1 Outline Required Bakground DSB: Modulator Spetrum Coherent Demodulator: Three methods Quadrature-arrier

More information