Federal 3535 UV & IR Series Datasheet

Size: px
Start display at page:

Download "Federal 3535 UV & IR Series Datasheet"

Transcription

1 Federal 3535 UV & IR Series Datasheet Federal Series Features : High power performance Promising power maintenance characteristics High efficiency package Level 1 on JEDEC moisture sensitivity analysis RoHS compliant Copyright 2015 Edison Opto Corporation. All right reserved. The information in this document is subject to change without notice. version : 4 1

2 Table of Contents General Information...3 Absolute Maximum Ratings...4 Characteristics...4 Luminous Flux Characteristic...5 Voltage Bin Structure (IR660, IR850)...6 Voltage Bin Structure (Ultraviolet)...6 Wavelength Bin Structure...6 Mechanical Dimensions...7 Characteristic curve...9 Reflow Profile...25 Reliability...26 Product Packaging Information...27 Revision History...28 About Edison Opto...28 Copyright 2015 Edison Opto Corporation. All right reserved. The information in this document is subject to change without notice. version : 4 2

3 General Information Introduction Federal 3535 UV&IR Series is a smaller and brighter single-chip LED. Federal is a surface mount, compact, high brightness LED that is suitable for various illumination needs such as Machine Vision. Ordering Code Format 2 F X0 01 xx 00 F02 xxx X1 X2 X3 X4 X5 X6 X7 X8 X1 X2 X3 X4 X5 Type Component Series Wattage Color 2 Emitter F Federal X W VX UV EX IX Deep Red IR850 X6 X7 X8 Internal code PCB Board Serial Number 00 - F Ordering Code Format (Emitter on Star ) 5 F X0 01 xx S 001 xxxx X1 X2 X3 X4 X5 X6 X7 X8 X1 X2 X3 X4 X5 Type Component Series Wattage Color 5 Module F Federal X W VX UV EX IX Deep Red IR850 X6 X7 X8 Internal code Quantity Serial Number S Star pcs Copyright 2015 Edison Opto Corporation. All right reserved. The information in this document is subject to change without notice. version : 4 3

4 Absolute Maximum Ratings Parameter Symbol Value Units DC Forward Current [1] Ultraviolet, Deep Red : 350/700 (each chip) I F IR 850 : 700/1000 Ultraviolet, Deep Red : 800 Peak Pulsed Current; (tp 100μs, Duty cycle=0.25) I pulse IR 850 : 1400 Ultraviole, Deep Red : 5 Transient Surge Voltage - IR 850 : 3 Reverse Voltage [2] V R Note 2 V LED Junction Temperature [3] T J 125 C Operating Temperature ~ +80 C Storage Temperature ~ +125 C Soldering Temperature C Notes: 1. Proper current derating must be observed to maintain junction temperature below the maximum at all time. 2. LEDs are not designed to drive in reverse bias. 3. Allowable reflow cycles are 3 times for each LED 4. tp: Pulse width time Warning: The transient surge voltage of EFE4I must < 3V, otherwise the compnents get damaged! ma ma V Characteristics Parameter Symbol Value Units Viewing Angle (Typ.) 2Θ 1/2 Ultraviolet : 135 Deep Red, IR 850, Cherry Red : 125 Thermal resistance - 10 Wavelength Range - Ultraviolet : Deep Red : IR 850 : Level 1 Degree o C/W nm JEDEC Moisture Sensitivity - Notes: 1. Wavelengths are stated as peak wavelength. 2. Edison maintains a tolerance of ±2nm for peak wavelength. Floor Life Conditions: 30 C / 85% RH Soak Requirements(Standard) Time (hours): 168+5/-0 Conditions: 85 C / 85% RH - Copyright 2015 Edison Opto Corporation. All right reserved. The information in this document is subject to change without notice. version : 4 4

5 Luminous Flux Characteristic Luminous Flux Characteristics Tj=25 C Color Ultraviolet Deep Red IR 850 Group Min Luminous Power@350mA (mw) Group Min Luminous Power@700mA (mw) B1 200 B3 400 B2 300 C0 500 B3 400 C1 600 B0 100 B0 100 B1 200 B B B B C0 500 Order Code 2FX001VX00F FX001EX00F FX001IX00F02001 Note: The luminous flux performance is guaranteed within published operating conditions. Edison Opto maintains a tolerance of ±10% on flux measurements. Copyright 2015 Edison Opto Corporation. All right reserved. The information in this document is subject to change without notice. version : 4 5

6 Voltage Bin Structure (IR660, IR850) Group Min. Voltage (V) Max. Voltage (V) U U U U Note: Forward voltage measurement allowance is ± 0.06V. Voltage Bin Structure (Ultraviolet) Group Min. Voltage (V) Max. Voltage (V) V V V Note: Forward voltage measurement allowance is ± 0.06V. Wavelength Bin Structure Color Group Min. Wp (nm) Max. Wp (nm) VV Ultraviolet VW VX VY Deep Red EX IR850 IX Note: Dominant wavelength measurement allance: ±2nm. Copyright 2015 Edison Opto Corporation. All right reserved. The information in this document is subject to change without notice. version : 4 6

7 Mechanical Dimensions Emitter Type Dimension 1.30± ± ± ± ± ± ± ± ± ± ± ±0.13 Star PCB Type Dimension (5FX001xxS ) 3.905± Notes: 1. All dimensions are measured in mm. 2. Drawings are not to scale. 1.60±0.30 Copyright 2015 Edison Opto Corporation. All right reserved. The information in this document is subject to change without notice. version : 4 7

8 Circuit PCB Layout Pad Configuration PAD FUNCTION 1 ANODE LED 2 CATHODE 3 THERMAL Note: The thermal pad is electrically isolated from anode and cathode. Solder Pad 0,65 1,3 0,5 1,65 3,3 0,5 0,4 0,5 Copyright 2015 Edison Opto Corporation. All right reserved. The information in this document is subject to change without notice. version : 4 8

9 Characteristic curve Color Spectrum Normalized luminous Intensity(%) UV Deep Red IR Wavelength(nm) Color Spectrum for Federal 3535 UV&IR series at T J =25 C Copyright 2015 Edison Opto Corporation. All right reserved. The information in this document is subject to change without notice. version : 4 9

10 Beam Pattern 1.2 Normalized Luminous Intensity Angle (Degree) Emission Angle for IR850, Deep Red 1.2 Normalized Luminous Intensity Angle (Degree) Emission Angle for UV Copyright 2015 Edison Opto Corporation. All right reserved. The information in this document is subject to change without notice. version : 4 10

11 Forward Current vs. Forward Voltage Forward Current (ma) Forward Voltage (V) Forward Voltage vs. Forward Current for Federal 3535 UV Relative Lumnious Intensity Forward Current (ma) Forward Current vs. Luminous Intensity for Federal 3535 IR660 Copyright 2015 Edison Opto Corporation. All right reserved. The information in this document is subject to change without notice. version : 4 11

12 Forward Current (ma) Forward Voltage (V) Forward Voltage vs. Forward Current for Federal 3535 IR850 Copyright 2015 Edison Opto Corporation. All right reserved. The information in this document is subject to change without notice. version : 4 12

13 Relative Radiant flux vs. Forward Current Relative Radiant flux Forward Current (ma) Relative Radiant flux vs. Forward Current for Federal 3535 UV Relative Radiant flux Forward Current (ma) Relative Radiant flux vs. Forward Current for Federal 3535 IR 660 Copyright 2015 Edison Opto Corporation. All right reserved. The information in this document is subject to change without notice. version : 4 13

14 Relative Radiant flux Forward Current (ma) Relative Radiant flux vs. Forward Current for Federal 3535 IR 850 Copyright 2015 Edison Opto Corporation. All right reserved. The information in this document is subject to change without notice. version : 4 14

15 Relative Radiant flux vs. Junction Temperature Relative Radiant flux Junction Temperature ( o C) Relative Radiant flux vs. junction temperature for Federal 3535 UV Relative Radiant flux Junction Temperature ( o C) Relative Radiant flux vs. junction temperature for Federal 3535 IR 660 Copyright 2015 Edison Opto Corporation. All right reserved. The information in this document is subject to change without notice. version : 4 15

16 Relative Radiant flux Junction Temperature ( o C) Relative Radiant flux vs. junction temperature for Federal 3535 IR 850 Copyright 2015 Edison Opto Corporation. All right reserved. The information in this document is subject to change without notice. version : 4 16

17 Forward Voltage vs. Junction Temperature Forward Voltage (V F ) Junction Temperature ( o C) Forward voltage vs. junction temperature for Federal 3535 UV Forward Voltage (V F ) Junction Temperature ( o C) Forward voltage vs. junction temperature for Federal 3535 IR 660 Copyright 2015 Edison Opto Corporation. All right reserved. The information in this document is subject to change without notice. version : 4 17

18 Forward Voltage (V F ) Junction Temperature ( o C) Forward voltage vs. junction temperature for Federal 3535 IR 850 Copyright 2015 Edison Opto Corporation. All right reserved. The information in this document is subject to change without notice. version : 4 18

19 Wavelength vs. Forward Current Wavelength (nm) Forward Current (ma) Wavelength vs. Forward Current for UV Wavelength (nm) Forward Current (ma) Wavelength vs. Forward Current for IR660 Copyright 2015 Edison Opto Corporation. All right reserved. The information in this document is subject to change without notice. version : 4 19

20 Wavelength (nm) Forward Current (ma) Wavelength vs. Forward Current for IR850 Copyright 2015 Edison Opto Corporation. All right reserved. The information in this document is subject to change without notice. version : 4 20

21 Wavelength vs. Junction Temperature Wavelength (nm) Junction Temperature ( o C) Wavelength vs. junction temperature for UV Wavelength (nm) Junction Temperature ( o C) Wavelength vs. junction temperature for IR660 Copyright 2015 Edison Opto Corporation. All right reserved. The information in this document is subject to change without notice. version : 4 21

22 Wavelength (nm) Junction Temperature ( o C) Wavelength vs. junction temperature for IR850 Copyright 2015 Edison Opto Corporation. All right reserved. The information in this document is subject to change without notice. version : 4 22

23 Maximum Current vs. Ambient Temperature Maximum Current (ma) Rth(J-A)=45 o C/W Rth(J-A)=35 o C/W Rth(J-A)=25 o C/W Ambient Temperature ( o C) Maximum Current vs. Ambient Temperature for UV Maximum Current (ma) Rth(J-A)=55 o C/W Rth(J-A)=45 o C/W Rth(J-A)=35 o C/W Ambient Temperature ( o C) Maximum Current vs. Ambient Temperature for IR660 Copyright 2015 Edison Opto Corporation. All right reserved. The information in this document is subject to change without notice. version : 4 23

24 Maximum Current (ma) Rth(J-A)=55 o C/W Rth(J-A)=45 o C/W Rth(J-A)=35 o C/W Ambient Temperature ( o C) Maximum Current vs. Ambient Temperature for IR850 Copyright 2015 Edison Opto Corporation. All right reserved. The information in this document is subject to change without notice. version : 4 24

25 Reflow Profile The following reflow profile is from IPC/JEDEC J-STD-020D which provided here for reference. Reflow Profiles Classification Reflow Profiles Profile Feature Preheat & Soak Temperature min (Tsmin) Temperature max (Tsmax) Time (Tsmin to Tsmax) (ts) Average ramp-up rate (Tsmax to Tp) Liquidous temperature (TL) Time at liquidous (tl) Pb-Free Assembly 150 C 200 C seconds 3 C/second max. 217 C seconds Peak package body temperature (Tp)* 255 C ~260 C * Classification temperature (Tc) 260 C Time (tp)** within 5 C of the specified classification temperature (Tc) Average ramp-down rate (Tp to Tsmax) Time 25 o C to peak temperature 30** seconds 6 C/second max. 8 minutes max. Notes: 1. * Tolerance for peak profile temperature (Tp) is defined as a supplier minimum and a user maximum. 2. ** Tolerance for time at peak profile temperature (tp) is defined as a supplier minimum and a user maximum. Copyright 2015 Edison Opto Corporation. All right reserved. The information in this document is subject to change without notice. version : 4 25

26 Reliability NO. Test Item Test Condition Remark 1 Temperature Cycle 2 Thermal Shock -40 C~100 C 30, 30, mins -40 C~100 C 15, 15 mins 10 sec 100 Cycle 100 Cycle 3 Resistance to Soldering Heat T SOL =260 C, 30 sec 3 times 4 Moisture Resistance 25 C~65 C 90% RH 24 hrs / 1 cycle 10 Cycle 5 High-Temperature Storage T A =100 C 1,000 hrs 6 Humidity Heat Storage T A =85 C RH=85% 1,000 hrs 7 Low-Temperature Storage T A =-40 C 1,000 hrs 8 Operation Life test 25 C 1,000 hrs 9 High Temperature Operation Life test 85 C 1,000 hrs 10 High Humidity Heat Life Test 85 o C, 85%RH 1,000 hrs 11 ON/OFF Test 30 sec ON, 30 sec OFF 1.5W times Failure Criteria Item Criteria for Judgment Min. Max. Lumen Maintenance 85% - Δu'v' Forward Voltage - Initial Data x 1.1 Reverse Current - 10 μa Resistance to Soldering Heat No dead lamps or visual damage Copyright 2015 Edison Opto Corporation. All right reserved. The information in this document is subject to change without notice. version : 4 26

27 Product Packaging Information ( - ) 4± ± ± ± ± ± ± ± 0.10 ( + ) CATHODE SIDE ANODE SIDE Taping reel dimensions Federal 3535 Package Item Quantity Total Dimensions(mm) Reel 500pcs 500pcs R-178 Box 4 Reels 2,000pcs 240*235*67 Carton 5 boxes 10,000pcs 353*354*256 Starting with 50pcs empty,and 50pcs empty at the last Copyright 2015 Edison Opto Corporation. All right reserved. The information in this document is subject to change without notice. version : 4 27

28 Revision History Versions Description Release Date 1 Establish order code information 2012/12/ Add the Characteristic curve 2. Add the Emitter on Star ordering code 1. Add Cherry Red information 2. Add Reliability & Reflow Profile 1. Add color BIN of IR Revise all the characteristic curve 3. Add Voltage BIN Structure 4. Add Color BIN Code 2013/02/ /09/ /01/20 About Edison Opto Edison Opto is a leading manufacturer of high power LED and a solution provider experienced in LDMS. LDMS is an integrated program derived from the four essential technologies in LED lighting applications- Thermal Management, Electrical Scheme, Mechanical Refinement, Optical Optimization, to provide customer with various LED components and modules. More Information about the company and our products can be found at Copyright 2015 Edison Opto. All rights reserved. No part of publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photo copy, recording or any other information storage and retrieval system, without prior permission in writing from the publisher. The information in this publication are subject to change without notice. For general assistance please contact: service@edison-opto.com.tw For technical assistance please contact: LED.Detective@edison-opto.com.tw Copyright 2015 Edison Opto Corporation. All right reserved. The information in this document is subject to change without notice. version : 4 28

Federal 3535 UV & IR Series Datasheet

Federal 3535 UV & IR Series Datasheet Federal 3535 UV & IR Series Datasheet Federal Series Features : High power performance Promising power maintenance characteristics High efficiency package Level 1 on JEDEC moisture sensitivity analysis

More information

PLCC W UV Datasheet

PLCC W UV Datasheet PLCC 3528 0.06W UV Datasheet PLCC Series Features : High luminous Intensity and high efficiency Based on Ultraviolet : InGaN / GaInP technology Excellent performance Suitable for all SMT assembly methods

More information

PLCC Series W Plant Lighting

PLCC Series W Plant Lighting PLCC Series PLCC Series 2835 0.5W Plant Lighting Datasheet Introduction : Ultra high luminous efficacy, combined with the flexibility in design due to its slim and miniature size, PLCC LED Series are optimized

More information

PLCC W RTB 3in1 Datasheet

PLCC W RTB 3in1 Datasheet PLCC 5050 0.2W RTB 3in1 Datasheet PLCC Series Features : High Luminous Intensity Based on /Green : InGaN, : AlGaInP technology Wide viewing angle : 120 Excellent performance and visibility Suitable for

More information

3528 1W Red. PLCC Series. Datasheet - AM. Introduction : Description : Feature and Benefits : PLCC Series

3528 1W Red. PLCC Series. Datasheet - AM. Introduction : Description : Feature and Benefits : PLCC Series PLCC Series PLCC Series 3528 1W Red Datasheet - AM Automotive Lighting Outdoor Lighting General Lighting Indoor Lighting Signal Lighting Introduction : Ultra high luminous efficacy, combined with the flexibility

More information

PLCC W Single Color Datasheet

PLCC W Single Color Datasheet PLCC 3528 0.06W Single Color Datasheet PLCC Series Features : High luminous Intensity and high efficiency Based on Blue/Green : InGaN, Red : AlGaInP technology Wide viewing angle : 120 Excellent performance

More information

Federal 5050 UV & IR Datasheet

Federal 5050 UV & IR Datasheet Federal 5050 UV & IR Datasheet Features : High power performance Promising power maintenance characteristics High efficiency package Level 1 on JEDEC moisture sensitivity analysis RoHS compliant Believe

More information

PLCC W White 3 in 1 Datasheet

PLCC W White 3 in 1 Datasheet PLCC 3528 0.2W White 3 in 1 Datasheet PLCC Series Features : High luminous Intensity and high efficiency Based on InGaN / GaN technology Wide viewing angle : 120 Excellent performance and visibility Suitable

More information

Edixeon S Series IR/UV Datasheet

Edixeon S Series IR/UV Datasheet Edixeon Series Edixeon S Series IR/UV Datasheet Features : Low voltage operation Instant light Long operating life Reflow process compatible Copyright 2017 Edison Opto Corporation. All right reserved.

More information

Edixeon RGB R Series Datasheet

Edixeon RGB R Series Datasheet Edixeon Series Edixeon RGB R Series Datasheet Features : Three chips (colors) in one package Independent control of each color More energy efficient than incandescent and most halogen lamps Low voltage

More information

Edixeon S-C Series White Datasheet

Edixeon S-C Series White Datasheet Edixeon S-C Series White Datasheet Edixeon Series Features : Various colors More energy efficient than incandescent and most halogen lamps Low voltage operation Instant light Long operating life Copyright

More information

Edixeon RGB Series Datasheet

Edixeon RGB Series Datasheet Edixeon RGB Series Datasheet Edixeon Series Features : Three chips (colors) in one package Independent control of each color More energy efficient than incandescent and most halogen lamps Low voltage operation

More information

PLCC 1208 Module Datasheet

PLCC 1208 Module Datasheet PLCC Series PLCC 1208 Module Datasheet Features : High luminous Intensity and high efficiency Wide viewing angle : 120 Excellent performance and visibility Suitable for all SMT assembly methods IR reflow

More information

ET W White Datasheet

ET W White Datasheet PLCC Series ET-3528.6W White Datasheet Features : High luminous Intensity and high efficiency Based on Blue : InGaN technology Wide viewing angle : 12 Excellent performance and visibility Suitable for

More information

Edixeon S White Series Datasheet

Edixeon S White Series Datasheet Edixeon Series Edixeon S White Series Datasheet Features : Various colors More energy efficient than incandescent and most halogen lamps Low voltage operation Instant light Long operating life Copyright

More information

ET-3528x-1F3W Series Datasheet

ET-3528x-1F3W Series Datasheet PLCC Series ET-3528x-1F3W Series Datasheet Features : High luminous Intensity and high efficiency Based on Blue/Green : InGaN, Red : AlGaInP technology Wide viewing angle : 120 Excellent performance and

More information

Edixeon RGB Series Datasheet

Edixeon RGB Series Datasheet Edixeon RGB Series Datasheet Edixeon Series Features : Three chips (colors) in one package Independent control of each color More energy efficient than incandescent and most halogen lamps Low voltage operation

More information

IR/UV Edixeon S Series Datasheet

IR/UV Edixeon S Series Datasheet High Power LEDs IR/UV Edixeon S Series Datasheet Features : Low voltage operation Instant light Long operating life Reflow process compatible. Believe SRL Via Lago di Trasimeno, 21 - Schio (VI) - Italy

More information

EdiLine IV Series Datasheet

EdiLine IV Series Datasheet High Power LEDs EdiLine IV Series Datasheet Features : Linear Packaging Design High Efficiency Low Power Consumption Long Operating Lifespan Easy Installation with Screws Typical Applications : General

More information

High Luminous Efficacy Infrared LED Emitter LZ1-00R400

High Luminous Efficacy Infrared LED Emitter LZ1-00R400 High Luminous Efficacy Infrared LED Emitter LZ1-00R400 Key Features High Efficacy 5W Infrared LED Ultra-small foot print 4.4mm x 4.4mm x 3.2mm Surface mount ceramic package with integrated glass lens Very

More information

LedEngin, Inc. High Luminous Efficacy Deep Red LED Emitter LZ1-00R205. Key Features. Typical Applications. Description

LedEngin, Inc. High Luminous Efficacy Deep Red LED Emitter LZ1-00R205. Key Features. Typical Applications. Description Key Features High Luminous Efficacy Deep Red LED Emitter LZ1-R25 High Efficacy 5W Deep Red LED Ultra-small foot print 4.4mm x 4.4mm x 3.2mm Surface mount ceramic package with integrated glass lens Very

More information

Industry standard 3.5mmx3.5mm package 130 viewing angle at 50% Iv Low Thermal Resistance C/W Built-in ESD Protection RoHS and REACh compliant

Industry standard 3.5mmx3.5mm package 130 viewing angle at 50% Iv Low Thermal Resistance C/W Built-in ESD Protection RoHS and REACh compliant SST-10-UV Surface Mount Series Ultraviolet LED Features: High Power UV LED with Peak Wavelengths between 365-405nm Table of Contents SST-10 Binning Structure...2 Product Shipping & Labeling Information...3

More information

LedEngin, Inc. High Luminous Efficacy Red LED Emitter LZ4-00R110. Key Features. Typical Applications. Description

LedEngin, Inc. High Luminous Efficacy Red LED Emitter LZ4-00R110. Key Features. Typical Applications. Description Key Features High Luminous Efficacy Red LED Emitter LZ4-R11 High Luminous Efficacy 1W Red LED Ultra-small foot print 7.mm x 7.mm x 4.3mm Surface mount ceramic package with integrated glass lens Very low

More information

COPYRIGHT 2013 LED ENGIN. ALL RIGHTS RESERVED. LZ4-00R300 (6.0-09/19/13)

COPYRIGHT 2013 LED ENGIN. ALL RIGHTS RESERVED. LZ4-00R300 (6.0-09/19/13) High Luminous Efficacy Far Red LED Emitter LZ4-00R300 Key Features High Efficacy 6.3W Far Red LED Ultra-small foot print 7.0mm x 7.0mm Surface mount ceramic package with integrated glass lens Very low

More information

COPYRIGHT 2013 LED ENGIN. ALL RIGHTS RESERVED. LZ1-00R500 (1.0 08/23/13)

COPYRIGHT 2013 LED ENGIN. ALL RIGHTS RESERVED. LZ1-00R500 (1.0 08/23/13) 940nm Infrared LED Emitter LZ1-00R500 Key Features High Efficacy 940nm 2W Infrared LED Ultra-small foot print 4.4mm x 4.4mm Surface mount ceramic package with integrated glass lens Very low Thermal Resistance

More information

High Luminous Efficacy Red LED Emitter LZ4-00R100

High Luminous Efficacy Red LED Emitter LZ4-00R100 Key Features High Luminous Efficacy Red LED Emitter LZ4-00R100 High Luminous Efficacy 10W Red LED Ultra-small foot print 7.0mm x 7.0mm x 4.1mm Surface mount ceramic package with integrated glass lens Very

More information

Datasheet. AH3535LC-1LEIX 1W/3W 3535 IR LED Lambertian

Datasheet. AH3535LC-1LEIX 1W/3W 3535 IR LED Lambertian Datasheet AH3535LC-1LEIX 1W/3W 3535 IR LED Lambertian Features 1W/3W 3535 Al2O3 Ag-plating Ceramic Package Half Angle (2θ1/2) : 125 Silicone Compression Molding Lens Vertical Chips Main Applications Plant

More information

High Efficacy 365nm UV LED Emitter LZ1-00U600

High Efficacy 365nm UV LED Emitter LZ1-00U600 High Efficacy 365nm UV LED Emitter LZ1-U6 Key Features High Efficacy 365nm 5W UV LED Ultra-small foot print 4.4mm x 4.4mm x 3.2mm Surface mount ceramic package with integrated glass lens Very low Thermal

More information

LedEngin, Inc. High Efficacy UV LED Emitter LZ1-00UA05. Key Features. Typical Applications. Description

LedEngin, Inc. High Efficacy UV LED Emitter LZ1-00UA05. Key Features. Typical Applications. Description High Efficacy UV LED Emitter LZ1-00UA05 Key Features High Efficacy 5W UV LED Ultra-small foot print 4.4mm x 4.4mm x 3.2mm Surface mount ceramic package with integrated glass lens Very low Thermal Resistance

More information

High Luminous Efficacy Red LED Emitter LZ1-00R100. Key Features. Typical Applications. Description

High Luminous Efficacy Red LED Emitter LZ1-00R100. Key Features. Typical Applications. Description High Luminous Efficacy Red LED Emitter LZ1-00R100 Key Features High Luminous Efficacy 5W Red LED Ultra-small foot print 4.4mm x 4.4mm Surface mount ceramic package with integrated glass lens Very high

More information

LedEngin, Inc. High Efficacy 365nm UV LED Emitter LZ1-00U605. Key Features. Typical Applications. Description

LedEngin, Inc. High Efficacy 365nm UV LED Emitter LZ1-00U605. Key Features. Typical Applications. Description High Efficacy 365nm UV LED Emitter LZ1-00U605 Key Features High Efficacy 365nm 5W UV LED Ultra-small foot print 4.4mm x 4.4mm x 3.2mm Surface mount ceramic package with integrated glass lens Very low Thermal

More information

High Efficacy UV LED Emitter LZ4-00UA00

High Efficacy UV LED Emitter LZ4-00UA00 High Efficacy UV LED Emitter LZ4-UA Key Features High Efficacy 1W UV LED Ultra-small foot print 7.mm x 7.mm x 4.3mm Surface mount ceramic package with integrated glass lens Very low Thermal Resistance

More information

HDSM-431x/433x 0.39 (10.0mm) Single digit surface mount LED display. Features

HDSM-431x/433x 0.39 (10.0mm) Single digit surface mount LED display. Features HDSM-41x/4x.9 (1.mm) Single digit surface mount LED display Datasheet Description This is.9 (1.mm) height single digit display. This device utilizes AlInGaP / GaAs chips.this device is with top surface

More information

LZ4-00UA10. LedEngin, Inc. High Efficacy UV LED Emitter. Key Features. Typical Applications. Description

LZ4-00UA10. LedEngin, Inc. High Efficacy UV LED Emitter. Key Features. Typical Applications. Description High Efficacy UV LED Emitter LZ4-UA1 Key Features High Efficacy 1W UV LED Ultra-small foot print 7.mm x 7.mm x 4.3mm Surface mount ceramic package with integrated glass lens Very low Thermal Resistance

More information

High Luminous Efficacy Red LED Emitter LZ4-00R100. Key Features. Typical Applications. Description

High Luminous Efficacy Red LED Emitter LZ4-00R100. Key Features. Typical Applications. Description High Luminous Efficacy Red LED Emitter LZ4-00R100 Key Features High Luminous Efficacy 10W Red LED Ultra-small foot print 7.0mm x 7.0mm Surface mount ceramic package with integrated glass lens Very low

More information

LZ4-00D110. LedEngin, Inc. High Efficacy Dental Blue + UV LED Emitter. Key Features. Typical Applications. Description

LZ4-00D110. LedEngin, Inc. High Efficacy Dental Blue + UV LED Emitter. Key Features. Typical Applications. Description High Efficacy Dental Blue + UV LED Emitter LZ4-D11 Key Features High Efficacy 1W Dental Blue + UV LED Three Dental Blue Dice + One UV Die Ultra-small foot print 7.mm x 7.mm x 4.3mm Surface mount ceramic

More information

Technical Data Sheet 1206 Package Chip LED

Technical Data Sheet 1206 Package Chip LED Lead (Pb) Free Product - RoHS Compliant Feature RoHS compliant. Chip LED package. Colorless clear resin Wide viewing angle 130 o. Brightness: 71 to180 mcd at 20 ma. Qualification according to AEC-Q101.

More information

Table of Contents. DS178 LUXEON UV U Line Product Datasheet Lumileds Holding B.V. All rights reserved.

Table of Contents. DS178 LUXEON UV U Line Product Datasheet Lumileds Holding B.V. All rights reserved. Illumination LUXEON UV U Line Highest power density, superior efficiency, powered by leading Chip Scale Package (CSP) technology At a micro package size compared to other ultraviolet and violet LEDs, LUXEON

More information

High Luminous Efficacy RGB LED Emitter LZ4-00MC00. Key Features. Typical Applications. Description

High Luminous Efficacy RGB LED Emitter LZ4-00MC00. Key Features. Typical Applications. Description High Luminous Efficacy RGB LED Emitter LZ4-MC Key Features High Luminous Efficacy 1W RGB LED Individually addressable die Unlimited color mixing Ultra-small foot print 7.mm x 7.mm Surface mount ceramic

More information

Display Surface-mount ELSS-206SURWA/S530-A3/S290

Display Surface-mount ELSS-206SURWA/S530-A3/S290 Features Industrial standard size. Packaged in tape and reel for SMT manufacturing. The thickness is thinness than tradition display. Low power consumption. Categorized for luminous intensity. The product

More information

LED HIGH POWER Product Data Sheet LTPL-C034UVH365

LED HIGH POWER Product Data Sheet LTPL-C034UVH365 Product Data Sheet LTPL-C034UVH365 Created Date: 04 / 15 / 2015 Revision: 4: 09 / 16 / 2015 1. Description The LiteON C03 UV Product series is a revolutionary, energy efficient light source for UV curing

More information

Data Sheet. HDSM-541x, HDSM-543x 0.56 (14.22mm) Dual digit surface mount LED display. Description. Features. Package Dimensions. Ordering Information

Data Sheet. HDSM-541x, HDSM-543x 0.56 (14.22mm) Dual digit surface mount LED display. Description. Features. Package Dimensions. Ordering Information HDSM-51x, HDSM-5x.56 (1.mm) Dual digit surface mount LED display Data Sheet Description The HDSM-51x/5x is a dual digit display of.56 (1.mm) height. This device utilizes AlInGaP / GaAs chips and has a

More information

Preliminary. LedEngin, Inc. High Radiant Flux Density 400nm Violet LED Emitter LZP-00UA00. Key Features. Typical Applications.

Preliminary. LedEngin, Inc. High Radiant Flux Density 400nm Violet LED Emitter LZP-00UA00. Key Features. Typical Applications. High Radiant Flux Density 400nm Violet LED Emitter LZP-00UA00 Key Features Ultra-bright, compact 24-die, 400nm Violet LED Very high Radiant Flux density, 40 W/cm 2 Small high density foot print, 12.0mm

More information

ELUM5A 1.8W Series. Introduction. The UM5A product series is a ceramic based LED with high quality and reliability that suitable for UV application.

ELUM5A 1.8W Series. Introduction. The UM5A product series is a ceramic based LED with high quality and reliability that suitable for UV application. Introduction The UM5A product series is a ceramic based LED with high quality and reliability that suitable for UV application. Features High power UVA LED Dimension 3.5mm* 3.5mm* 3.5mm ESD protection

More information

LedEngin, Inc. High Luminous Efficacy Amber LED Emitter LZ1-00A103. Key Features. Typical Applications. Description

LedEngin, Inc. High Luminous Efficacy Amber LED Emitter LZ1-00A103. Key Features. Typical Applications. Description Key Features High Luminous Efficacy Amber LED Emitter LZ1-A13 High Luminous Efficacy 3W Amber LED Ultra-small foot print 4.4mm x 4.4mm x 3.2mm Surface mount ceramic package with integrated glass lens Very

More information

COPYRIGHT 2013 LED ENGIN. ALL RIGHTS RESERVED. LZ4-00MC00 (6.0 09/26/13)

COPYRIGHT 2013 LED ENGIN. ALL RIGHTS RESERVED. LZ4-00MC00 (6.0 09/26/13) High Luminous Efficacy RGB LED Emitter LZ4-00MC00 Key Features High Luminous Efficacy 10W RGB LED Individually addressable die Unlimited color mixing Ultra-small foot print 7.0mm x 7.0mm Surface mount

More information

Cree XLamp XR LED Data Sheet

Cree XLamp XR LED Data Sheet Cree XLamp XR LED Data Sheet Cree XLamp LEDs combine the brightness of power LED chips with a rugged package capable of operating in excess of one watt. Cree XLamp LEDs lead the solid-state lighting industry

More information

Data Sheet. HDSM-291x/293x (7.0mm) Dual digit surface mount LED display. Features. Description. Package Dimensions. Ordering Information

Data Sheet. HDSM-291x/293x (7.0mm) Dual digit surface mount LED display. Features. Description. Package Dimensions. Ordering Information HDSM-91x/9x.8 (7.mm) Dual digit surface mount LED display Data Sheet Description The HDSM-91x/9x is a dual digit display of.8 (7.mm) height. This device utilizes AlInGaP / GaAs chips and has a grey surface

More information

High Power UV LED. Product Specification. Approval Sheet. Updated on 2018/01/15. Lextar.com. PU88S01 UV Emitter Product Specification

High Power UV LED. Product Specification. Approval Sheet. Updated on 2018/01/15. Lextar.com. PU88S01 UV Emitter Product Specification Lextar.com High Power UV LED Updated on 2018/01/15 Approval Sheet PU88S01 UV Emitter Product Part Number Customer UV 3535 Emitter PU88S01 Issue Date 2015/6/1 Feature 3W UV LED Emitter Compact dimensions:

More information

LZ1-00WW05. LedEngin, Inc. High Luminous Efficacy Warm White LED Emitter. Key Features. Typical Applications. Description

LZ1-00WW05. LedEngin, Inc. High Luminous Efficacy Warm White LED Emitter. Key Features. Typical Applications. Description High Luminous Efficacy Warm White LED Emitter LZ1-00WW05 Key Features High Luminous Efficacy 5W Warm White LED Ultra-small foot print 4.4mm x 4.4mm x 3.2mm Surface mount ceramic package with integrated

More information

SMD Middle Power LED 67-21S/NB3C-D4555B4L12835Z15/2T. Preliminary. Features. Description

SMD Middle Power LED 67-21S/NB3C-D4555B4L12835Z15/2T. Preliminary. Features. Description Preliminary Features PLCC-2 package Top view Blue LED Wide viewing angle Pb-free RoHS compliant Description The Everlight 67-21S package has high efficacy, middle power consumption, wide viewing angle

More information

High Radiant Flux Density 400nm Violet LED Emitter LZP-00UA00

High Radiant Flux Density 400nm Violet LED Emitter LZP-00UA00 High Radiant Flux Density 400nm Violet LED Emitter LZP-00UA00 Key Features Ultra-bright, compact 24-die, 400nm Violet LED Very high Radiant Flux density, 30 W/cm 2 Small high density foot print, 12.0mm

More information

Main Applications CCTV Wireless communication Indoor Lighting Outdoor Lighting

Main Applications CCTV Wireless communication Indoor Lighting Outdoor Lighting ProLight PK2N-2JJE-SD 2W Infrared 850 Power LED Technical Datasheet Version: 1.2 Features Viewing angle: 55 Instant light (less than 100ns) Lead free reflow soldering RoHS compliant Cool beam, safe to

More information

S-S35B-F

S-S35B-F Specification S-S35B-F2-275-01-2-110 RoHS SETi Customer Drawn Approval Approval 1. Description Table of Contents: 2. Mechanical Dimensions 3. Characteristics of S-S35B-F2-275-01-2-110 4. Characteristic

More information

CLD-DS72 Rev 0. Product family data sheet

CLD-DS72 Rev 0. Product family data sheet Product family data sheet CLD-DS72 Rev 0 Cree XLamp XB-G High Voltage White LEDs PRODUCT DESCRIPTION Built on Cree s SC³ Technology Platform, XLamp XB-G High-Voltage White (HVW) LED is optimized to lower

More information

Cree XLamp XP-G LEDs Data Sheet

Cree XLamp XP-G LEDs Data Sheet Cree XLamp XP-G LEDs Data Sheet The XLamp XP-G LED delivers unprecedented levels of light output and efficacy for a single die LED. The XLamp XP-G LED continues Cree s history of innovation in LEDs for

More information

High Efficacy Dental Blue LED Emitter LZ1-00DB00. Key Features. Typical Applications. Description

High Efficacy Dental Blue LED Emitter LZ1-00DB00. Key Features. Typical Applications. Description High Efficacy Dental Blue LED Emitter LZ1-00DB00 Key Features High Efficacy 5W Dental Blue LED Ultra-small foot print 4.4mm x 4.4mm Surface mount ceramic package with integrated glass lens Very low Thermal

More information

SMD Low Power LED EAPL2835RA0 Preliminary

SMD Low Power LED EAPL2835RA0 Preliminary Preliminary Features PLCC-2 package Top view Red LED Wide viewing angle Pb-free RoHS compliant Description The Everlight package has high efficacy, low power consumption, wide viewing angle and a compact

More information

LUXEON c. Power Light Source

LUXEON c. Power Light Source LUXEON c Power LED For appliances, portable lighting, tools and more Technical Datasheet DS41 LUXEON c Power Light Source Introduction The LUXEON c is the power LED that enables manufacturers of appliances,

More information

Features. Red Green Yellow Orange Description

Features. Red Green Yellow Orange Description HDSM-431x/433x 0.39 (10.0mm) Single digit surface mount LED display Data Sheet Description This is 0.39 (10.0mm) height single digit display. This device utilizes AlInGaP / GaAs chips.this device is with

More information

Introduction. UV Sterilization System Dimension 3.5mm* 3.5mm* 3.5mm. UV Photo-catalyst ESD protection up to 8KV

Introduction. UV Sterilization System Dimension 3.5mm* 3.5mm* 3.5mm. UV Photo-catalyst ESD protection up to 8KV Introduction The product series is a ceramic based LED with high quality and reliability that suitable for UV application. Features Applications High power UVA LED UV Sterilization System Dimension 3.5mm*

More information

LedEngin, Inc. High Luminous Efficacy Cool White LED Emitter LZC-00CW40. Key Features. Typical Applications. Description

LedEngin, Inc. High Luminous Efficacy Cool White LED Emitter LZC-00CW40. Key Features. Typical Applications. Description High Luminous Efficacy Cool White LED Emitter LZC-00CW40 Key Features High Luminous Efficacy 40W Cool White LED Small foot print 9.0mm x 9.0mm x 5.4mm Surface mount ceramic package with integrated glass

More information

3535BS IR LED 1ZBS35CF3DCH01ZC

3535BS IR LED 1ZBS35CF3DCH01ZC 3535BS IR LED 1ZBS35CF3DCH01ZC Outline:3.5*3.5*2.29mm High efficiency Good thermal dissipation & optical uniformity Table of Contents: Features---------------------------------------------------- 1 Product

More information

DATA SHEET: DomiLED. InGaN : DDZB-DJG-1-I1

DATA SHEET: DomiLED. InGaN : DDZB-DJG-1-I1 DATA SHEET: DomiLED DomiLED Synonymous with function and performance, the DomiLED series is perfectly suited for a variety of cross-industrial applications due to its small package outline, durability

More information

High Luminous Flux Density Warm White LED Emitter LZC-00WW00

High Luminous Flux Density Warm White LED Emitter LZC-00WW00 High Luminous Flux Density Warm White LED Emitter LZC-00WW00 Key Features High Luminous Flux Density 12-die Warm White LED More than 40 Watt power dissipation capability Ultra-small foot print 9.0mm x

More information

Technical Data Sheet 0805 Package Chip LED Preliminary

Technical Data Sheet 0805 Package Chip LED Preliminary Lead (Pb) Free Product - RoHS Compliant Feature RoHS compliant. Chip LED package. Colorless clear resin Wide viewing angle 140 o. Brightness:11.2 to 28.0 mcd at 5 ma. Qualification according to AEC-Q101.

More information

Introduction. UV Sterilization System Dimension 3.5mm* 3.5mm* 3.5mm. UV Photo-catalyst ESD protection up to 8KV. UV Sensor Light RoHS compliant

Introduction. UV Sterilization System Dimension 3.5mm* 3.5mm* 3.5mm. UV Photo-catalyst ESD protection up to 8KV. UV Sensor Light RoHS compliant EAUVA35353 1.8W Series Introduction The EAUVA35353 product series is a ceramic based LED with high quality and reliability that suitable for UV application. Features Applications High power UVA LED UV

More information

CLD-DS57 Rev 0. Product family data sheet

CLD-DS57 Rev 0. Product family data sheet Product family data sheet CLD-DS57 Rev Cree XLamp XQ-B LED PRODUCT DESCRIPTION Cree XLamp XQ-B LEDs revolutionize mid-power LEDs by delivering lighting-class reliability and a wider spread of light than

More information

COPYRIGHT 2017 LED ENGIN. ALL RIGHTS RESERVED. LZ4-00R408 (1.3-05/10/17)

COPYRIGHT 2017 LED ENGIN. ALL RIGHTS RESERVED. LZ4-00R408 (1.3-05/10/17) 850nm Infrared LED Emitter LZ4-00R408 Key Features High Efficacy 850nm 5W Infrared LED Ultra-small foot print 7.0mm x 7.0mm Surface mount ceramic package with integrated glass lens Low Thermal Resistance

More information

Cree XLamp XP-C LEDs Data Sheet

Cree XLamp XP-C LEDs Data Sheet Cree XLamp XP-C LEDs Data Sheet The XLamp XP-C LED combines the proven lighting-class performance and reliability of the XLamp XR-E LED in a package with 80% smaller footprint. The XLamp XP-C LED continues

More information

COPYRIGHT 2013 LED ENGIN. ALL RIGHTS RESERVED. LZ4-00G100 (5.4 11/18/13)

COPYRIGHT 2013 LED ENGIN. ALL RIGHTS RESERVED. LZ4-00G100 (5.4 11/18/13) High Luminous Efficacy Green LED Emitter LZ4-00G100 Key Features High Luminous Efficacy 10W Green LED Ultra-small foot print 7.0mm x 7.0mm Surface mount ceramic package with integrated glass lens Very

More information

Display Surface-mount EADSS050GA2

Display Surface-mount EADSS050GA2 Features Industrial standard size. Packaged in tape and reel for SMT manufacturing. The thickness is thinness than tradition display. Low power consumption. Categorized for luminous intensity. Pb free

More information

SST-05-IR-850nm. Surface Mount Series. Infrared LED. SST-05-IR-850nm Product Datasheet. Features. Table of Contents. Applications

SST-05-IR-850nm. Surface Mount Series. Infrared LED. SST-05-IR-850nm Product Datasheet. Features. Table of Contents. Applications SST-05-IR-850nm Surface Mount Series Infrared LED Table of Contents Technology Overview.... 2 Product Binning.... 3 Ordering Information... 3 Optical and Electrical Characteristics.... 4 B40 - Mech. Dimensions....

More information

Cree XLamp XP-E High-Efficiency White LEDs

Cree XLamp XP-E High-Efficiency White LEDs PRODUCT FAMILY DATA SHEET CLD-DS34 REV 0 Cree XLamp XP-E High-Efficiency White LEDs PRODUCT DESCRIPTION XLamp XP-E High-Efficiency White LEDs upgrade the XLamp XP-E to leading performance levels for diffuse

More information

General Information Part Number Nomenclature...2. Environmental Compliance...2. Product Characteristics...3. Product Selection...

General Information Part Number Nomenclature...2. Environmental Compliance...2. Product Characteristics...3. Product Selection... General Illumination LUXEON FlipChip UV Chip-scale package for maximum design flexibility in UV applications LUXEON FlipChip UV is the smallest and highest power density (W/cm 2 ) ultraviolet with FlipChip

More information

High Efficacy Dental Blue + UV LED Emitter LZ4-00D100. Key Features. Typical Applications. Description

High Efficacy Dental Blue + UV LED Emitter LZ4-00D100. Key Features. Typical Applications. Description High Efficacy Dental Blue + UV LED Emitter LZ4-00D100 Key Features High Efficacy 10W Dental Blue + UV LED Three Dental Blue Dice + One UV Die Individually addressable die Ultra-small foot print 7.0mm x

More information

Product family data sheet

Product family data sheet Cree XLamp MX-3S LEDs Product family data sheet CLD-DS32 Rev 1 Product Description The Cree XLamp MX-3S LED provides the proven lighting-class performance and reliability of Cree XLamp LEDs in a high-voltage,

More information

UVA. UVA-6868 UV LED (Dome Type) Super High power 10W LED Customize 3 types circuit design:

UVA. UVA-6868 UV LED (Dome Type) Super High power 10W LED Customize 3 types circuit design: -6868 UV LED (Dome Type) Featrures: Super High power 1W LED Customize 3 types circuit design: I. 3.5V (1 chip ) II. 6.8V (4 chip) III. 14.V (4 chip) Outline 6.8*6.8*3.7mm ALN substrate with anti-uv glasses

More information

COPYRIGHT 2016 LED ENGIN. ALL RIGHTS RESERVED. LZ4-00R608 (1.2-10/19/2016)

COPYRIGHT 2016 LED ENGIN. ALL RIGHTS RESERVED. LZ4-00R608 (1.2-10/19/2016) 850nm Dual Junction Infrared LED Emitter LZ4-00R608 Key Features 850nm Dual Junction Infrared LED Ultra-small foot print 7.0mm x 7.0mm Surface mount ceramic package with integrated glass lens Low Thermal

More information

DATASHEET SpiceLED RGB SNRTB-RLG

DATASHEET SpiceLED RGB SNRTB-RLG DATASHEET SpiceLED RGB SNRTB-RLG SpiceLED Like spice, its diminutive size is a stark contrast to its standout performance in terms of brightness, durability and reliability. Despite being the smallest

More information

DOMINANT. DomiLED. Opto Technologies Innovating Illumination. InGaN Warm White : DDF-WJG-2X5X-1 DATA SHEET : DomiLED. Features: Applications:

DOMINANT. DomiLED. Opto Technologies Innovating Illumination. InGaN Warm White : DDF-WJG-2X5X-1 DATA SHEET : DomiLED. Features: Applications: DATA SHEET : DomiLED InGaN Warm White : DomiLED With the intense colors that seem to glow with energy and its significant brightness, DomiLED white LED is a highly reliable design device. Its dynamic nature

More information

COPYRIGHT 2016 LED ENGIN. ALL RIGHTS RESERVED. LZ4-00MC00 (6.2 10/20/16)

COPYRIGHT 2016 LED ENGIN. ALL RIGHTS RESERVED. LZ4-00MC00 (6.2 10/20/16) High Luminous Efficacy RGB LED Emitter LZ4-00MC00 Key Features High Luminous Efficacy 10W RGB LED Individually addressable die Unlimited color mixing Ultra-small foot print 7.0mm x 7.0mm Surface mount

More information

Main Applications Entertainment Lighting Commercial Lighting Indoor Lighting Outdoor Lighting

Main Applications Entertainment Lighting Commercial Lighting Indoor Lighting Outdoor Lighting ProLight PK2N-3LME-HSD 3W Crimson Power LED Technical Datasheet Version: 1.2 Features 100% foot print compatible with Cree XP-C / XP-E / XP-G Best thermal material solution of the world Best Moisture Sensitivity:JEDEC

More information

1-Watt SMD 6x6mm With Dome Lens

1-Watt SMD 6x6mm With Dome Lens 1-Watt SMD 6x6mm With Dome Lens Robust energy-efficient design with long operating life Low thermal resistance Medium beam angle High luminous intensity Applications Automotive interior lighting Architectural

More information

Unique LED enabling limitless design freedom

Unique LED enabling limitless design freedom Illumination LUXEON UV FC Line Unique LED enabling limitless design freedom With FlipChip platform technology, LUXEON UV FC Line contains both 1mm 2 and 2mm 2 die sizes and is the smallest and highest

More information

DATA SHEET : SpicePlus 3014

DATA SHEET : SpicePlus 3014 DATA SHEET : SpicePlus 3014 120 InGaN White : SEW-YZSG Spice: Synonymous with function and performance, the new era of high intensity illumination in LED. With its high flux output and high luminous intensity,

More information

Cree XLamp XQ-D LED PRODUCT DESCRIPTION FEATURES. CLD-DS52 Rev 3G. Product family data sheet

Cree XLamp XQ-D LED PRODUCT DESCRIPTION FEATURES. CLD-DS52 Rev 3G. Product family data sheet Product family data sheet CLD-DS52 Rev 3G Cree XLamp XQ-D LED PRODUCT DESCRIPTION Cree XLamp XQ-D LEDs revolutionize low-cost, high-power LEDs by delivering lighting-class reliability and a wider spread

More information

LUXEON M High Flux Density and Efficacy

LUXEON M High Flux Density and Efficacy LUXEON M High Flux Density and Efficacy Introduction LUXEON M emitters are illumination grade LEDs designed to enable indoor, outdoor and industrial applications which are optimized either for high efficiency

More information

SMD Mini Top LEDs Y2SC-A0R1S2B7E-2T8-AM

SMD Mini Top LEDs Y2SC-A0R1S2B7E-2T8-AM Features P-LCC-2 package. Colorless clear resin. Wide viewing angle 120 o. Inner reflector and white package. Brightness: 112 to 280 mcd at 20mA. Qualification according to AEC-Q101 rev C. Precondition:

More information

SMD Low Power LED 45-21S/XK2D-HXXXXXXXXB2Z6/2T

SMD Low Power LED 45-21S/XK2D-HXXXXXXXXB2Z6/2T Features LM-80 Certified PLCC-2 package Top view white LED High luminous intensity output Wide viewing angle Pb-free RoHS compliant Description The Everlight 45-21S package has high efficacy, high CRI,

More information

LUXEON D Mid-Power LEDs

LUXEON D Mid-Power LEDs LUXEON 3535 2D Mid-Power LEDs Illumination Portfolio Introduction The LUXEON 3535 Mid-Power 2D LED portfolio in this datasheet delivers optimized performance in combination with Quality of Light needed

More information

CLD-DS52 Rev 0A. Product family data sheet

CLD-DS52 Rev 0A. Product family data sheet Cree XLamp XQ-D LED Product family data sheet CLD-DS52 Rev 0A PRODUCT DESCRIPTION Cree XLamp XQ-D LEDs revolutionize low-cost, high-power LEDs by delivering lighting-class reliability and a wider spread

More information

SMD MID Power LED 67-21S/KK4C-HXXXXXXXX2833Z6/2T

SMD MID Power LED 67-21S/KK4C-HXXXXXXXX2833Z6/2T Features PLCC-2 package Top view white LED High luminous intensity output Wide viewing angle Pb-free RoHS compliant ANSI Binning Description The Everlight 67-21S package has high efficacy, high CRI, low

More information

IR/UV Edixeon S Series Datasheet

IR/UV Edixeon S Series Datasheet High Power LEDs IR/UV Edixeon S Series Datasheet IR/UV Edixeon emitters are one of the highest power LEDs in the world by Edison Opto. IR/UV Edixeon emitters are designed to satisfy more and more Solid-State

More information

CLD-DS57 Rev 2B. Product family data sheet

CLD-DS57 Rev 2B. Product family data sheet Cree XLamp XQ-B LED Product family data sheet CLD-DS57 Rev 2B PRODUCT DESCRIPTION Cree XLamp XQ-B LEDs revolutionize mid-power LEDs by delivering lighting-class reliability and a wider spread of light

More information

DATA SHEET: DomiLED. AlInGaP : DRx-MKS

DATA SHEET: DomiLED. AlInGaP : DRx-MKS DATA SHEET: DomiLED DomiLED Synonymous with function and performance, the DomiLED series is perfectly suited for a variety of cross-industrial applications due to its small package outline, durability

More information

DOMINANT. DomiLED. Opto Technologies Innovating Illumination. InGaN Warm White : DDF-MJG DATA SHEET: DomiLED. Features: Applications:

DOMINANT. DomiLED. Opto Technologies Innovating Illumination. InGaN Warm White : DDF-MJG DATA SHEET: DomiLED. Features: Applications: DATA SHEET: DomiLED InGaN Warm White : DDF-MJG DomiLED With the intense colors that seem to glow with energy and its significant brightness, DomiLED white LED is a highly reliable design device. Its dynamic

More information

ELUA4545OG3 1.8W Series

ELUA4545OG3 1.8W Series Introduction The product series is a ceramic based LED with high quality and reliability that suitable for UV application. Features High power UVA LED Dimension 4.5mm* 4.5mm* 4.5mm ESD protection up to

More information

Carrier Tape Change for all Right Angle DomiLED DSx Product Change Notice issued on 18 May 2015.

Carrier Tape Change for all Right Angle DomiLED DSx Product Change Notice issued on 18 May 2015. DATA SHEET: Right Angle DomiLED TM High Brightness AlInGaP : DSx-PSS Carrier Tape Change for all Right Angle DomiLED DSx Product Change Notice issued on 18 May 2015. DomiLED TM Synonymous with function

More information

Dominant wavelength (nm) or CCT (K) Royal Blue 455 nm 465 nm 65 mw. Blue 465 nm 475 nm 4.5 lm. Green 520 nm 535 nm 18 lm. Amber 585 nm 595 nm 8.

Dominant wavelength (nm) or CCT (K) Royal Blue 455 nm 465 nm 65 mw. Blue 465 nm 475 nm 4.5 lm. Green 520 nm 535 nm 18 lm. Amber 585 nm 595 nm 8. Cree XLamp 455 LEDs Cree XLamp 455 LEDs bring the power of brightness to a wide range of lighting and backlighting applications including portable lighting, computer and television screens, signaling,

More information