MESSRS : CUSTOMER'S PRODUCT NAME: DC-AC INVERTER UNIT CXA-0379 TDK PRODUCT NAME:

Transcription

1 MESSRS : CUSTOMER'S PRODUCT NME: TDK PRODUCT NME: DC-C INVERTER UNIT CX-0379 TDK Corportion Corporte Hedqurters 13-1,Nihonshi 1-chome,Chuo-ku, Tokyo 103, JPN Telephone : ,Higshi-Ohwd,Ichikw-shi, Chi, JPN Telephone : Fx : PREPRED BY PPROVED BY UTHORIZED BY R DWG.No.

2 Precutionry Notes Regrding the Use of This Inverter When using this product, give due considertion to the precutionry notes descried elow nd ensure sfe design. Inpproprite use my result in electric shock, injury or fire. Wrning This product is suject to high voltge. Do not touch it while the power is on. Filing to do so my result in electric shock. Cution This product is designed for the lighting of Cold Cthode Fluorescent Lmp. Do not use it with ny other lod. Store this product under the conditions defined in the specifiction document. Do not store this product in n environment where dust, dirt or corrosive gs(slt,cid,se, etc.) is present. This product is suject to high voltge. If there is possiility tht the user my touch the product, provide proper indiction in order to drw the user's ttention. This product is designed for use with generl electronic equipment. If it is to e used with medicl equipment tht directly ffects humn life or for the control of trnsporttion equipment to which pssengers entrust their lives, provide thorough fil-sfe mesures. void using this product under high tempertures or high humidity or in n environment in which dust, dirt or ny corrosive gs (slt,cid,se, etc.) is present. lso,e creful not to llow the formtion of dew condenstion. It my result in dmge or electric shock. If the product does not hve uilt-in protective circuit (circuit reker, fuse, etc.), it is recommended tht fuse e used t the input stge to prevent the genertion of smoke or fire in the event of mlfunction. Even when the product hs uilt-in protective circuit (circuit reker, fuse, etc.), the circuit my not function properly due to inpproprite operting conditions or power-supply cpcity. It is recommended tht n pproprite protective circuit (circuit reker, fuse, etc.) e provided seprtely from the uilt-in circuit. Use the product only within the specified input voltge, output power, output voltge nd operting temperture rnges. Exceeding these vlues my result in dmge, etc. Provide mesure for the prevention of surge voltge due to lightning, etc. norml voltge my result in dmge, etc. To prevent prolems rising from short-circuiting of the high-voltge section, provide pproprite mesures to prevent the entry of foreign sustnces following instlltion. This product is not designed to provide resistnce to rdition. Ripples could e superimposed on the voltge nd the current in the input source connected to the inverter, depending on the impednce in the input source, wiring, etc. When you select n input source, plese check wveforms, etc on the finl set. Hndling Precutions This product uses thin wires. Oserve the following precutions nd hndle it with cre so s not to cuse wire rekge. Broken wire my result in dmge, etc. Do not stck multiple products on top of one nother. Do not llow the product to come in contct with tools, etc. Do not pply excessive stress during instlltion. It my cuse chipping nd crcking,resulting in dmge, etc. Provide clernce of 2 mm or more etween the high-voltge section of this product nd the frme ody on which the product is instlled nd lso the conductor section (pttern, pd etc. ). Plese do not use the product, when dropping it, since there is possiility of the prts dmge. Plese confirm normlity is not found in the product enough when using it y ny chnce. 1/7

3 The specifictions my e chnged without ny notice. When plcing orders, plese confirm "Specifictions" or "Product Drwing" through TDK sles or distriutors. Product Outline This product is 6-lmp inverter nd hs dimming functions nd re mote functions. This product hs shutdown function for sfety to stop high voltge genertion when lods (lmps) re open. The high voltge generting section () is coted with silicone s mesure ginst dust. This product hs n lrm output ( detection function for lmp lowout) to inform normlity of lmps (lods) when it detects the non-lighting condition (open stte of the lods) of the l mps. This is RoHS Directive complint pr oduct. () RoHS Directive complint:this mens tht, except for exempted pplictions, led, cdmium, mercury, hexvlent chromium, nd specified romite fire retrdnt mterils of PBB nd PBDE re not used sed on EU Directive 2002/95/EC. [1]Externl ppernce/structure nd dimensions 1-1. Externls chrt CN203 CX R MDE IN JPN CN206 CN204 CN207 CN205 CN208 CN201 CN202 Silicone Silicone No. Product nme Type nme / mteril Quntity Printed wiring ord PCB Composite (CEM-3) 1 Input connector CN201 DF3-8P-2H 1 Input connector CN202 IL-Z-9PL-SMTY-E Output connector CN203,CN204,CN205, CN206,CN207,CN208 SM02B-BHSS-1-TB(LF)(SN) 6 Remrks UL94V-0 t=1.2 HRS JE JST 1-2. Pin connection Input side CN201 Pin No. Symol Rting Remrks CN201-1 CN201-2 CN201-3 CN201-4 CN201-5 CN201-6 CN201-7 CN201-8 GND Vin 0V 11.4 ~ 12.6V GND Power V 2

4 Input side CN202 Pin No. Symol Rting Remrks CN202-1 CN202-2 CN202-3 CN202-4 CN202-5 CN202-6 CN202-7 CN202-8 CN202-9 GND 0V GND Vst BRTC BRTH BRTL BRTP Hi/Lo PWSEL 0V/5V 0V/5V ON/OFF 0V Dimming pin - 0~10k or 0~1V 0V/5V 0V/5V 0V/5V lrm output Dimming pin + PWM signl Hi/Lo PWM signl selection BRTC logic H Bck light ON L Bck light OFF Open Bck light ON Dimming pin connection (etween BRTH nd BRTL) 0 or 0V Luminnce min. 10k or 1V Luminnce mx. PWSEL logic H Internl dimming L Externl dimming Open Internl dimming Hi / Lo logic H Hi L Lo Open Lo Output side CN203 Pin No. Symol Rting Remrks CN203-1 VHIGH1 790Vrms 6.5mrms CCFL HOT CN203-2 VLOW1 VLOW2 Output side CN204 Pin No. Symol Rting Remrks CN204-1 VHIGH2 790Vrms 6.5mrms CCFL HOT CN204-2 VLOW3 Output side CN205 Pin No. Symol Rting Remrks CN205-1 VHIGH3 790Vrms 6.5mrms CCFL HOT CN205-2 Output side CN206 Pin No. Symol Rting Remrks CN206-1 VHIGH4 790Vrms 6.5mrms CCFL HOT CN206-2 VLOW4 VLOW5 Output side CN207 Pin No. Symol Rting Remrks CN207-1 VHIGH5 790Vrms 6.5mrms CCFL HOT CN207-2 VLOW6 Output side CN208 Pin No. Symol Rting Remrks CN208-1 VHIGH6 790Vrms 6.5mrms CCFL HOT CN208-2 Note 1-1. Mrking of product nme, lot no., nd co untry of origin 1) Product nme, lot no. nd country of origin re mrked on lel on trnsfor mer. 2) Lot no. mrking exmple (mnufctured on Septemer 25, 2005) R Revision RoHS Directive complint lnk Mnufcturing dte () Product identifiction m rk Mnufcturing month (mrked in 1 digit except Oc toer, Novemer nd Decemer tht re represetned y X, Y nd Z respectively.) Mnufcturing yer (lst digit in Christin yer) 3) Country of origin mrking exmpl e (MDE IN CHIN, MDE IN JPN, etc) () RoHS Directive complint:this mens tht, except for exempted pplictions, led, cdmium, mercury, hex vlent chromium, nd specified romite fire retrdnt mterils of PBB nd PBDE re not used sed on EU Directive 200 2/95/EC. Note 1-2. High voltge is generted etween the trnsformer nd the output connector. When you mount conductive mteril (metl frme, etc) ner the high-tension section during instlltion, plese e creful to secure 3mm or lrger sptil distnce in ll directions round it to prevent electric dischrge etween the high-tension s ection n d the conductive mteril. 3

5 1-3. Dimensionl drwing (5) (1.2) 8mx. (5) Dimensions in mm 4

6 [2] solute mximum rting Item Symol Spec Unit Remrks Input voltge Output voltge Operting temperture rnge Storge temperture rnge Vin 0~13.2 BRTC BRTL Po T Ts 0~13.2 0~ ~60-30~85 Humidity rnge RH 95 %RH V W Per lmp Mximum wet-ul temperture to e 38 No condenstion to occur [3] Electricl chrcteristics Item Output current 1 (Hi mx.) Output current 2 (Lo mx.) Output current 3 (Hi min.) Output current 4 (Lo min.) Input current 1 (H mx.) Input current 2 (OFF) Oscilltion frequency Dimming frequency lrm output Open-circuit voltge Symol lo1~6 lo1~6 Vin(V) BRTC(V) BRTL(V) lo1~ Condition H/Lo(V) T() RL1~ k k lo1~ lin1 lin2 F1 F2 Vst1 Vst k 120k MIN. Spec TYP. MX Unit mrms mrms mrms mrms k k m k khz k Hz k V lmp OFF Vo kv V 5

7 [4] Mesurement circuit Vin V Iin V CN201-5,6,7,8 Vin FL 2 3 T01 7 CN203-1 VHIGH1 RL1 CN201-1,2,3,4 GND CN203-2 VLOW1 SW6 Iout1 CN202-1,2 GND CN204-1 VHIGH2 RL2 ON/OFF 5V Rr 010k V SW1 CN202-3 Vst CN202-4 BRTC CN202-5 BRTH 1 7 IC 14 8 CN204-2 VLOW2 CN205-1 VHIGH3 CN205-2 VLOW3 CN206-1 VHIGH4 SW7 SW8 Iout2 RL3 Iout3 RL4 Vr 01V BRTP 0-5V Hi/Lo 5V Internl dimming / Externl dimming 5V SW2 SW3 SW4 SW5 CN202-6 BRTL CN202-7 BRTP CN202-8 Hi/Lo CN202-9 PWSEL CN206-2 VLOW4 CN207-1 VHIGH5 CN207-2 VLOW5 CN208-1 VHIGH6 CN208-2 VLOW6 SW9 SW10 SW11 Iout4 RL5 Iout5 RL6 Iout6 F F 1000:1 V Mesuring pprtus V :DC voltmeter (DVNTEST R6451 or equivlent) :DC mpere meter (DVNTEST R6451 or equivlent) V :Effective vlue voltmeter (KEITHLEY 2001 or equivlent) ~ F :Freuqeuncy counter (DVNTEST R6452 or equivlent) :High-frequency mpere meter (KEITHLEY 2001 or equivlent) ~ 1000:1 :High voltge proe (Tektronix P3000 or equivlent) Vrmt pin circuit (reference) CN201-5,6,7,8 Vin CN202-4 BRTC 160kW 27kW 22kW NPN 10kW 10kW PNP IC1 6

8 Note 4-1. To e the one to operte s follows y - of SW1. Note 4-2. To e the one to operte s follows y - of SW2. SW1 Unit opertion SW2 Output current tuning Opertes Vrile resistnce dimming Does not operte Voltge dimming Open Opertes Note 4-3. To e the one to operte s follows y - of SW3. Note 4-4. To e the one to operte s follows y - of SW4. SW3 Dimming signl SW4 Unit opertion Externl PWM dimming Lo mode Internl PWM dimming Hi mode Open Internl PWM dimming Open Lo mode Note 4-4. To e the one to operte s follows y - of SW5. SW5 Open Dimming switchover Internl PWM dimming selec tion Externl PWM dimming selection Internl PWM dimming selec tion Note 4-3. Protection circuit opertion Loding condition Shutdown function lrm output (CN202-3) when lod is norml lods (lmps) when 1 to 6 lmps re open Does not shut down Shuts down 0V 5V * When ny one or more of SW6 through SW11 tur n open in the mesurement circuit, the protection circuit will output 5V to shut down. Note 4-4. Note 4-5. Note 4-6. The voltge pplied to the lod could e lower thn the output open-circuit voltge when the distriuted cpcitnce in mounted condition is high (due to lekge of current y distriuted cpcitnc e), nd mkes it prticulrly hrd to light when driving cold-cthode tue in low temper tures. Plese e creful in your instlltion to mke the distriuted cpcitnce s low s possile. (For exmple, mke high-tension wiring to cold-cthode tue s short s possile, nd never use strnded wire for the high-tension wiring.) In low current zone, plese confirm chrcteristics of the lmp eforfe use. Flickering cou ld occur depending on lmp. Plese set the input power source cpcity to 9 or higher. If it is less thn 9, there is possiility for cir cuit protection element (fuse or IC protector) not to melt. 7

9 [5] Vrious tests To meet the following reliility tests. Test item Test conditions Judgment criteri Low temperture exposure Low temperture opertion High temperture exposure High temperture opertion Therml shock Moisture resistnce Moisture resistnt opertion Virtion Shock h 0 500h Operting condition: s rted h h Operting condition: s rted cycles 30 min. ech 40 90~95%RH 500h 40 90~95%RH 500h 10~55Hz Hlf-mplitude 0.75mm 58~500Hz 1G Sweeping time: 11 min. 60 min. ech in X, Y, Z directions 100G 6ms sinusoidl hlf wve 1 time for X, Y, Z direction ech No defect to exist in electric chrcteristics nd externl ppernce. 8

10 6 Pckging nd mrking shipping ox is pckged to void from dmge. Following items re printed on the ox Product nme Mnufcturer nme CX-0379 TDK Customer prt numer Quntity Inspection No. Country of origin Styrofom plte Crdord plte Plstic g Product Styrofom (contining 5pcs.) X 10 lyers = 50pcs./ox Crdord ox (210mm) (340mm) (480mm) mrking BOTTOM VIEW 9

11 [7] Others 7-1. Test conditions Unless otherwise specified, the temperture to e (2015) nd humidity to e (6520) %RH Wrrnty Wrrnty shll e for one yer fter delivery, nd those products cusing filure during the wrrnty period nd which filures re ttriuted to the mnufcturer's responsiility shll e re plced t no chrge. 7-3.Ozone-depleting sustnces Ozone-depleting sustnces re not used in the mnufcturing process of this product Others When ny dout rises out this specifiction, it shll e discussed nd decided upon etween oth prties. 10