SPECIFICATIONS. Input Output Approvals

Transcription

1 Technical Data Sheet,000 Watt 48 olt, Single Output Power Supply with PFC and Parallel Functions UNIT CODE PS-RSP DESCRIPTION,000 Watt, 48, Single Output, Enclosed Power Supply with PFC and Parallel Functions SPECIFICATIONS Input Output Approvals Universal 90 ~ 64AC 0 ~ 4A Features at a Glance: Universal 90 ~ 64AC AC Input with active surge current limiting - for worldwide use High power in a compact 4mm U package Built-in: /0.8A & 5/0.3A Auxiliary power; Remote ON-OFF control; Remote sense function Active PFC function (PF>0.97) Protections: Short circuit, Overload, Over voltage Over temperature and Fan Alarm Efficient (9%) with power density of.4 W/in 3 Output oltage can be trimmed between 60-5% of the 48 olt output (9. ~ 55.) Current Sharing (up to 4 units 7,00 Watts) DC OK alarm signal output (TTL signal) Forced air cooling by DC fan with speed control Safety Standards: UL60950-, TU EN Certificates: UL, CUL, TU, CB and CE MBTF: 46.3K hours min. MIL-HDBK-7F (5ºC) Case: 95D Weight: 4.9 lbs. (.95 Kgs) Dimensions:.6 L x 5.0 W x.6 H 95L X 7W X 4H mm 5 year warranty PS-RSP is a,000 Watt, U low profile, enclosed type switching power supply with Universal AC Input and both parallel and PFC functions. Standard features include: High power density of.4 W/in 3 ; Output trim range of 40%~5% of 48; 9% efficiency, Active PFC function (PF>0.97) and Parallel function allowing current sharing up to 8 kilowatts; Short circuit, Overload, Over oltage and Over Temperature protection plus fan alarm. Circuits; Built-in /0.A auxiliary output for remote control; Built-in remote ON-OFF control; Built-in remote sense function; and 5 year warranty. Applications include front-end power systems, factory automation and control, industrial and military instrumentation, moving sign, telecom/datacom/signal, laser-carving machines, IC testing equipment, LCD panel burn-in systems and battery charging. Pricing: + $ request a quote Pollock Industries, 8 Butternut Road, White River, T 0500 toll-free (603) sales@pollock.biz Copyright 06 Pollock Industries, Inc. All trademarks and service marks are the properties of their respective owners

2 Bauart gepruft Sicherheit egelma ge od o s be wac g www. tuv.com ID W Power Supply with Single Output RSP-000 series Pollock Industries, 8 Butternut Road, White River, T 0500 Toll-Free (603) sales@electracool.com File Name:RSP-000-SPEC 05--3

3 000W Power Supply with Single Output RSP-000 series SPECIFICATION MODEL RSP-000- RSP RSP DC OLTAGE 4 48 RATED CURRENT 00A 80A 4A CURRENT RANGE 0 ~ 00A 0 ~ 80A 0 ~ 4A RATED POWER 00W 90W 06W RIPPLE & NOISE (max.) Note. 50mp-p 00mp-p 300mp-p OUTPUT OLTAGE ADJ. RANGE 0.5 ~ 4 ~ 8 4 ~ 56 OLTAGE TOLERANCE Note.3 ±.0% ±.0% ±.0% LINE REGULATION LOAD REGULATION SETUP, RISE TIME ±.0% ±.0% 500ms, 60ms/30AC at full load ±0.5% ±0.5% ±0.5% ±0.5% HOLD UP TIME (Typ.) 6ms/30AC at 75% load 0ms/30AC at full load OLTAGE RANGE Note.5 90 ~ 64AC 7 ~ 370DC FREQUENCY RANGE 47 ~ 63Hz INPUT POWER FACTOR (Typ.) EFFICIENCY (Typ.) 0.97/30AC at full load 87% 90.5% 9% AC CURRENT (Typ.) Note.5 3A/5AC 7A/30AC 6A/5AC 0A/30AC 6A/5AC 0A/30AC INRUSH CURRENT (Typ.) LEAKAGE CURRENT COLD START 50A <ma / 40AC 05 ~ 5% rated output power OERLOAD Protection type : Constant current limiting, unit will shut down o/p voltage after 5 sec. re-power on to recover PROTECTION 4.7 ~ ~ ~ 67. OER OLTAGE Protection type : Shut down o/p voltage, re-power on to recover OER TEMPERATURE Shut down o/p voltage, recovers automatically after temperature goes down OUTPUT OLTAGE PROGRAMMABLE(P) Adjustment of output voltage is allowable to 40 ~ 5% of nominal output voltage. Please refer to the Function Manual. CURRENT SHARING Up to 8000W or (3+) units. Please refer to the Function Manual. FUNCTION AUXILIARY POWER 0.8A REMOTE ON-OFF CONTROL By electrical signal or dry contact Power ON:open Power OFF:short. Please refer to the Function Manual. REMOTE SENSE Compensate voltage drop on the load wiring up to 0.5. Please refer to the Function Manual. DC OK SIGNAL The isolated TTL signal out. Please refer to the Function Manual. WORKING TEMP. -35 ~ +70 (Refer to "Derating Curve") WORKING HUMIDITY 0 ~ 90% RH non-condensing ENIRONMENT STORAGE TEMP., HUMIDITY -40 ~ +85, 0 ~ 95% RH TEMP. COEFFICIENT ± 0.03%/ (0 ~ 50 ) IBRATION 0 ~ 500Hz, G 0min./cycle, 60min. each along X, Y, Z axes SAFETY STANDARDS UL60950-, TU EN approved WITHSTAND OLTAGE I/P-O/P:3KAC I/P-FG:KAC O/P-FG:0.5KAC ISOLATION RESISTANCE I/P-O/P, I/P-FG, O/P-FG:00M Ohms / 500DC / 5 / 70% RH Parameter Standard Test Level / Note SAFETY & EMC (Note 4) OTHERS NOTE EMC EMISSION EMC IMMUNITY Conducted Radiated Harmonic Current oltage Flicker EN5504, EN604-3, EN Parameter ESD Radiated EFT / Burst Surge Conducted Magnetic Field oltage Dips and Interruptions EN550 (CISPR) / EN550 (CISPR) Class A EN550 (CISPR) / EN550 (CISPR) Class A EN EN Standard EN EN EN EN EN EN EN Test Level / Note Level 3, 8K air ; Level, 4K contact Level 3 Level 3 Level 4, K/Line-Line 4K/Line-Earth Level 3 Level 4 >95% dip 0.5 periods, 30% dip 5 periods, >95% interruptions 50 periods MTBF 59K hrs min. Telcordia SR-33 (Bellcore) ; 46.3K hrs min. MIL-HDBK-7F (5 )7F (5 ) DIMENSION 95*7*4mm (L*W*H) PACKING.95Kg; 6pcs/.7Kg/.5CUFT File Name:RSP-000-SPEC 05--3

4 000W Power Supply with Single Output RSP-000 series Block Diagram PFC fosc : 0KHz PWM fosc : 90KHz +S I/P EMI FILTER ACTIE INRUSH CURRENT LIMITING RECTIFIERS & PFC POWER SWITCHING RECTIFIERS & FILTER ORING FET + - PFC CONTROL PWM CONTROL O..P. DETECTION CIRCUIT ORING FET CONTROL -S P TRANSCEIERS DA/DB DETECTION CIRCUIT MCU O.T.P. AUX POWER FAN MCU RECTIFIERS & FILTER /0.8A AUX POWER 5/0.3A DATA ISOLATION T-Alarm DC-OK Remote ON-OFF Static Characteristics 00 INPUT MODEL 4 48 LOAD (%) , ~64AC 5AC 00AC 90AC 00W 00A 080W 90A 00W 85A 960W 80A 90W 80A 63W 68A 440W 60A 48W 5A 06W 4A 73.6W 35.7A 5W 3.5A 30.4W 7.3A INPUT OLTAGE (AC) 60Hz Derating Curve Efficiency vs Load (48 Model) LOAD (%) 80 for 80~64AC EFFICIENCY (%) AMBIENT TEMPERATURE ( ) (HORIZONTAL) LOAD The curve above is measured at 30AC. Pollock Industries, 8 Butternut Road, White River, T 0500 Toll-Free (603) sales@electracool.com File Name:RSP-000-SPEC 05--3

5 000W Power Supply with Single Output RSP-000 series Function Manual. Remote Sense The Remote Sense compensates voltage drop on the load wiring up to 0.5 PIN -S PIN +S + LOAD CN50 Sense lines should be twisted in pairs to minimize noise pick-up. The +S signal should be connected to the positive terminal of the load whereas -S signal to the negative terminal.. Output oltage Programming (or, P / remote voltage programming / remote adjust / margin programming / dynamic voltage trim) In addition to the adjustment via the built-in potentiometer, the output voltage can be trimmed to 40~5% of the nominal voltage by applying EXTERNAL OLTAGE. PIN -S PIN +S PIN3 P - + CN50 PIN4 GND EXTERNAL OLTAGE (DC) +S & +, -S & - also need to be connected on CN50. out OUTPUT OLTAGE(%) for model for 4,48 model Non-Linear OUTPUT CURRENT (%) OUTPUT OLTAGE (%) EXTERNAL OLTAGE (DC) The rated current should change with the Output oltage Programming accordingly. 3. Remote ON-OFF Control The power supply can be turned ON/OFF individually or along with other units by using the "Remote ON-OFF" function. PIN7 Remote ON-OFF switch PIN +5-AUX Between Remote ON-OFF and +5-AUX Switch Open Switch Short Power Supply Status ON OFF - + CN50 Pollock Industries, 8 Butternut Road, White River, T 0500 Toll-Free (603) sales@electracool.com File Name:RSP-000-SPEC 05--3

6 000W Power Supply with Single Output RSP-000 series 4.Current Sharing with Remote Sense RSP-000 has the built-in active current sharing function and can be connected in parallel, up to 4 units, to provide higher output power as exhibited below : DA,DB and GND are connected mutually in parallel. Difference of output voltages among parallel units should be less than 0.. The total output current must not exceed the value determined by the following equation: Maximum output current at parallel operation=(rated current per unit) (Number of unit) 0.9 The power supplies should be paralleled using short and large diameter wiring and then connected to the load. Under parallel operation, the minimum output load should be greater than 5% of total output load; otherwise, it is likely that only one unit operates whereas other units may enter standby mode or their LED status indicators may not turn on. Under parallel operation ripple of the output voltage may be higher than the SPEC at light load condition. It will go back to normal ripple level once the output load is more than 5%. CN50/CN504 Function pin connection Parallel PSU PSU PSU3 PSU4 CN50 CN504 CN50 CN504 CN50 CN504 CN50 CN504 unit X unit 3 unit 4 unit X X X is CN50/CN504 connected to plug pin, X is CN50/CN504 not connected to plug pin. RSP-000 RSP-000 RSP-000 RSP-000 PSU PSU PSU3 PSU4 - + CN504 TB - + CN504 TB - + CN504 TB - + CN504 TB CN50 CN50 CN50 CN LOAD Fig DA DB GND DA DB GND DA DB GND DA DB GND DA DB GND DA DB GND DA DB GND DA DB GND PSU CN50 PSU CN50 PSU3 CN50 PSU4 CN50 If the lines of CN50 are too long, they should be twisted in pairs to avoid the noise. Pollock Industries, 8 Butternut Road, White River, T 0500 Toll-Free (603) sales@electracool.com File Name:RSP-000-SPEC 05--3

7 000W Power Supply with Single Output RSP-000 series Mechanical Specification Case No. 95D Unit:mm M4 L= CN50 SR5 CN504 + CN TB M4 L=4 59 Air flow direction M4 L= Mounting Instruction Hole No. Recommended Screw Size MAX. Penetration Depth L Recommended Tightening Torque M4 M3 6mm 4mm 7~0Kgf-cm 6~ 8Kgf-cm Mounting Surface Chassis of RSP-000 Control Pin No. Assignment (CN50) : HRS DF-DP-DS or equivalent Mating Housing HRS DF-DS or equivalent Terminal HRS DF-**SC or equivalent Mounting Screw L Pin No. 3 Function +S -S P Description Positive sensing for remote sense. Negative sensing for remote sense. Connection for output voltage programming. (Note.) 4 GND This pin connect to the negative terminal(-). 5 DC-OK High (4.5 ~ 5.5) : When the out 80% ± 6%. Low (0 ~ 0.5) : When out 80% ± 6%. The maximum sourcing current is 0mA and only for output. (Note.) 6 T-ALARM High (4.5 ~ 5.5) : When the internal temperature (TSW or TSW open) exceeds the limit of temperature alarm. Low (0 ~ 0.5) : When the internal temperature (TSW or TSW short) under the limit temperature. The maximum sourcing current is 0mA and only for output. (Note.) 7 Remote The unit can turn the output on and off by electrical signal or dry contact between Remote ON-OFF and +5-AUX. (Note.) ON-OFF Short (4.5 ~ 5.5) : Power OFF ; Open (0 ~ 0.5) : Power ON ; The maximum input voltage is ,9,0 GND-AUX Auxiliary voltage output GND. The signal return is isolated from the output terminals (+ & -). +5-AUX Auxiliary voltage output, 4.5~5.5, referenced to GND-AUX. The maximum load current is 0.3A. This output has the built-in "Oring diodes" and is not controlled by the Remote ON-OFF control. +-AUX Auxiliary voltage output, 0.6~3., referenced to. The maximum load current is 0.8A. This output has the built-in "Oring diodes" and is not controlled by the Remote ON-OFF control. Note: Non-isolated signal, referenced to the output terminals (-). Note: Isolated signal, referenced to GND-AUX. Pollock Industries, 8 Butternut Road, White River, T 0500 Toll-Free (603) sales@electracool.com File Name:RSP-000-SPEC 05--3

8 000W Power Supply with Single Output RSP-000 series LED Indicators & Corresponding Signal at Function Pins Function DC-OK DC-NG T-OK T-ALARM LED GREEN RED GREEN RED Description When output voltage 80% ± 5% of o rated. When output voltage 80% ± 5% of o rated. When the internal temperature (TSW & TSW short) is within safe limit When the internal temperature (TSW or TSW open) exceeds the limit of temperature alarm *Signal between function pin and "GND-AUX". * Signal 0 ~ ~ ~ ~ 5.5 Power Supply Output ON ON ON OFF Control Pin No. Assignment (CN50) : HRS DF-6DP-DSA or equivalent Mating Housing Terminal HRS DF-6DS or equivalent HRS DF-**SC or equivalent Pin No. Function Description, 3,4 DA DB Differential digital signal for parallel control. Differential digital signal for parallel control. 5,6 GND These pins connect to the negative terminal (-). Control Pin No. Assignment (CN504): Pin No., Function Terminal resistance Description CN504 is the selector of terminal resistor that is designed for DA/DB signals and parallel control function. AC Input Terminal Pin No. Assignment Pin No. Assignment Diagram AC/N 3 AC/L FG Mx a imum mounting torque 8Kgf-cm DC Output Terminal Pin No. Assignment Assignment Diagram +, - Mx a imum mounting torque 0Kgf-cm Installation Manual Please refer to : Pollock Industries, 8 Butternut Road, White River, T 0500 Toll-Free (603) sales@electracool.com File Name:RSP-000-SPEC 05--3