BANDITO-GOLDEN MASK Bandito Impulse GOLDEN MASK METAL DETECTOR BANDITO PULSE INDUCTION USER S GUIDE

Transcription

1 GOLDEN MASK METAL DETECTOR BANDITO PULSE INDUCTION USER S GUIDE MADE BY GOLDEN MASK BULGARIA 2006

2 INSTRUCTION MANUAL THE DEVICE.. 3 TECHNICAL CHARACTERISTICS...3 METAL DETECTOR OPERATORS ETHICS MAIN FUNCTIONS...4 FITTING THE COIL....4 OPERATION...5 BATTERY CHARGE

3 THE DEVICE Bandito Impulse is a professional metal detector ( P.I.). The detector works on the principle of pulseinduction and is one of the apparatuses which can be used for a very deep seeking of metals. You can work very easy with the device, ground balance is not a problem for it, the detector can work with very different coils: square coils 40х40сm, 50х50cm, 110х110сm, 150х150сm, 200х200см, and also a round coil of 28 cm for digging coins. TECHNICAL CHARACTERISTICS Pulse-induction system Work frequency - 100Hz Impulse power - 210W Terminals for coils, for headphones and for charging Supplying device with accumulator - 12V/2.2Ah built in Working time with once charged batteries hours Automatic charge device with light indication Time of charging batteries hours Battery testing automatic light test control Sizes x 160 x 65 mm Net weight gm Consummation of coils 28cm, 40 X 40, 50 X 50 with ma Consummation of coil 110 X 110cm ma Voltage - 12V METAL DETECTOR OPERATORS ETHICS Please, pay respect to the personality and own property of the others; Always ask for permission for searching in private property; Do not make dirty environment while searching; Fill with soil back the dug plots; Follow all laws and other normative for searching objects in the country you are searching; Do not dig historical or archeological objects; Before starting looking for different objects, read carefully normative legislation of the country, regarding rights of property over found objects and 3

4 those, which concern cultural belongings of the country. MAIN FUNCTIONS POWER/ON switches the detectors and regulates its power. There are ten power levels as it works mainly on 9 TH or 10 TH level. GAIN regulates the power of gained signal. When the soil is normal it works mainly on level 10. THRESHOLD a threshold tone. In dry soil it normally works on level 9 or 10. When the moisture is high it s good to work under level 8. SIGNAL eliminates soil mineralization. When soil is normal it s good to work on level 8 to 10, while the soil is highly mineralized it s recommended to work on level 0 to 3. NOISE eliminates influence of Roman pottery over the apparatus, it s used in combination with SIGNAL. FAST ZERO press this button for about 2-3 seconds when the detector is ready to work with and the coil is over the ground. Pressing this button eliminates ground mineralization and the detector chooses itself the most suitable depth for searching. While press the button fast zero you must be sure there is no metal objects under the coil. We recommend press this button every 4-5 minutes. LOW BATTERY if the light switches on while operating, it shows it s necessary to charge the battery. If it happens, please, do not use the detector. The charge set consists of micro processor which can not work longer if the strain goes down than allowed and the sto can t be re-charged. It will lead to damages of the sto! PHONE a headphones jack. When you switch on headphones, the speaker switches off automatically. We advise you to use headphones for they help you hear sound better and thus lead to uncovering deeper buried objects. It s recommended to use stereo headphones with amplify control. SPEAKER speaker. COIL a coil jack. FITTING THE COIL Unfold the coil and put it into the openings. While stuff in the pipes one into another you have to work very carefully. Stuff in the cable 4

5 very carefully into the last pipe. Fit the cable of the coil to the coupling COIL /turn it carefully till the end/. After buying the detector you have to charge it using the enclosed charge device for few hours. ATTENTION! You must not turn on the detector if the coil is unfold, otherwise you can damage it! OPERATION For reaching better results while searching in deep soils, you have to keep the following instructions: Walk out away in a place where there are no metal objects. Take up the coil in the air, set the buttons POWER, GAIN, NOISE and TRESHOLD to 10, and the button SIGNAL to 0. Put the coil close to earth and set it still over 3-5 meters over earth. Press the button ZERO for about 2-3 seconds and release it. The signal tone slowly disappears or some occasional short tones can be heard in the SPEAKER. Keep the coil steady over the ground for some minutes. If the signal tone or occasional short tones appear again, then slowly decrease to the left the buttons POWER and TRESHOLD while they can hardly be heard. For the detector is constructed for a wide range of searching, to find the proper situation of an object we advise you to set SIGNAL and NOISE on a position 5, where the signal tone will be just over the object. It s reasonable to use the detector when the situation of an object has been localized before. You can also tune up the apparatus to be very sensible towards very small objects-nails, caps, foil and other trash - so they can t be caught out by the detector. Such discrimination is necessary when digging huge range of soil for finding great finds, not necessary while searching spare coins. If soil is highly mineralized you may her different disturbances. You will realize that if the signal of the apparatus increases and do not disappear in some meters. This shows that under your feet there is a huge object and signal comes by the highly ore soil. So press the button FAST ZERO for 2-3- seconds and keep the coil steady over the ground. Automatic settings will make operation with the detector normal and you will be ready to continue working in this region. If you use 5

6 one or two meters square coils you have to know that their working position is cm over the ground. In this position if you hear a heavy and short signal, walk back and raise the coil some more cm over the ground; if you loose the signal it will mean the object is too small. So you use your own judgment if you will continue working. If the signal is still loud and long it means the object is bigger and deeply buried. When lifting the coil over cm over the ground the signal will not disappear. If using the one meter coil you happen to find a short signal you can find the proper situation as you keep the following instructions: Walk back, wait for the signal tone to disappear and then walk ahead to the possible object. When you hear the first signal you have to stay still and mark with a nib a line on the ground. Then walk to the opposite side, i.e. 180 degrees of the place and walk toward the object. After hear the signal, mark a second line. If the distance between the two lines is some centimeters that shows the object is too small. For precise location of the object make two more measuring to the left and to the right at 90 degrees. Another way to localize a small object is to lift up the coil at 90 degrees, i.e. keep it parallel upright to yourself. Catch the coil with two hands to the two opposite parallels. Bring the coil near the ground, press FAST ZERO for 2-3 seconds and walk ahead as you measure the same way mentioned before at 90 an 180 degrees. Examples: 1. Signal tone rises fast over a small parcel, it slows down fast and then rises up again. This indicates for a very small object on a low depth. 2. Signal tone rises slowly, covers a huge parcel and then slowly goes down it indicates for a huge and deeply buried /in a range of 2-3 meters/ object. 6

7 object. As more experiments you make as much you will form your professional experience. BATTERY CHARGE 3. Signal tone rises slowly over a small parcel and then slowly does down. It indicates for a middles big object buried in a range of 1-2 meters. You can make your measurements as you bury different sized object in different range of depths at least 1 meter on another for testing small coils, and at least 4 meters for testing one or two meters coils. While working with the detector be consistent and keep notes for all your measurements as you point the parcel and its structure of soil, the depth of buried objects, and the kind of the object, the settings of buttons that localize the position of the Bandito Impulse possesses a rechargeable storage battery. If a light "Low battery" switches on while working with the apparatus you must spot work and recharge the battery. Plug in the jack"charge" of the charge set into electric net of 220V. After some hours the battery will be recharged. The charge set will automatically switch off when the battery is ready so the battery can t be damaged if it stays longer in the charge set. When it s ready, in the reverse order take the jack back of the "CHARGE". PRECAUTIONS: While searching in different regions it is possible to come upon different ammunitions - shells, cartridges, mines so be careful while dig any object. You must dig found object very carefully and do not allow children around! The producer and the salesman do not answer for your actions! Do not search for objects protected by law! 7

8 Fill back with soil dug holes! Do not damage or dirty environment! 8

9 SPECIFICATION Pulse-induction system Work frequency - 100Hz Impulse power - 210W Terminals for coils, for headphones and for charging Supplying device with built in accumulator - 12V/2.2Ah Working time with once charged batteries hours Automatic charge device with light indication Time of charging batteries hours Battery testing automatic light test control Sizes x 160 x 65 mm Net weight gm Consummation of coils 28cm, 40 X 40, 50 X 50 with ma Consummation of coil 110 X 110cm ma Voltage - 12V 9