Low Cost JFET Input Operational Amplifiers ADTL082/ADTL084
|
|
- Damian Phillips
- 5 years ago
- Views:
Transcription
1 Low Cost JFET Input Operational Amplifiers ADTL/ADTL FEATURES TL/TL compatible Low input bias current: pa maximum Offset voltage 5.5 mv maximum (ADTLA/ADTLA) 9 mv maximum (ADTLJ/ADTLJ) ±5 V operation Low noise: nv/ Hz Wide bandwidth: 5 MHz Slew rate: V/μs CMRR: db minimum Total harmonic distortion:.% Supply current:. ma typical Unity-gain stable APPLICATIONS General-purpose amplification Power control and monitoring Active filters Industrial/process control Data acquisition Sample and hold circuits Integrators Input buffering GENERAL DESCRIPTION The ADTL and ADTL are JFET input amplifiers that provide industry-leading performance over TLx devices. The ADTLA and ADTLA are improved versions of TLx A, I, and Q grades. The ADTLJ and ADTLJ are industry alternatives to the TLx standard and C grades. The ADTLx family offers lower noise, offset voltage, offset drift over temperature, and bias current over the TLx. In addition, the ADLTx family has better common-mode rejection and slew rates. These op amps are ideal for various applications, including process control, industrial and instrumentation equipment, PIN CONFIGURATIONS OUT A IN A +IN A 3 V ADTLJ TOP VIEW (Not to Scale) +V 7 OUT B IN B 5 +IN B Figure. -Lead SOIC_N (R-) OUT A IN A +IN A 3 V ADTLA TOP VIEW (Not to Scale) +V 7 OUT B IN B 5 +IN B Figure. -Lead MSOP (RM-) OUT A OUT D IN A 3 IN D +IN A 3 ADTLJ +IN D +V TOP VIEW V +IN B 5 (Not to Scale) +IN C IN B 9 IN C OUT B 7 OUT C Figure 3. -Lead SOIC_N (R-) OUT A OUT D IN A +IN A +V +IN B IN B OUT B ADTLA TOP VIEW (Not to Scale) 3 9 IN D +IN D V +IN C IN C OUT C Figure. -Lead TSSOP (RU-) active filtering, data conversion, buffering, and power control and monitoring. The A grade amplifiers are available in lead-free packaging. The standard grade amplifiers are available in both leaded and leadfree packaging. The ADTLA and ADTLA are specified over the extended industrial ( C to +5 C) temperature range. The ADTLJ and ADTLJ are specified over the commercial ( C to 7 C) temperature range Rev. B Information furnished by Analog Devices is believed to be accurate and reliable. However, no responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other rights of third parties that may result from its use. Specifications subject to change without notice. No license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Trademarks and registered trademarks are the property of their respective owners. One Technology Way, P.O. Box 9, Norwood, MA -9, U.S.A. Tel: Fax: Analog Devices, Inc. All rights reserved.
2 ADTL/ADTL TABLE OF CONTENTS Features... Applications... Pin Configurations... General Description... Revision History... Specifications... 3 Absolute Maximum Ratings... Thermal Resistance... Power Sequencing... ESD Caution... Typical Performance Characteristics...5 Outline Dimensions... Ordering Guide... REVISION HISTORY /7 Rev. A to Rev. B Changes to Ordering Guide... /7 Rev. to Rev. A Changes to Table... 3 /7 Revision : Initial Version Rev. B Page of
3 ADTL/ADTL SPECIFICATIONS VCC = ±5 V, VCM = V, TA = 5 C, over all grades, unless otherwise noted. Table. J Grade A Grade Parameter Symbol Conditions Min Typ Max Min Typ Max Unit INPUT CHARACTERISTICS Offset Voltage VOS mv C TA +7 C mv C TA +5 C 9 mv Offset Voltage Drift ΔVOS/ΔT C TA +7 C 5 μv/ C C TA +5 C μv/ C Input Bias Current IB pa C TA +7 C 3 3 na C TA +5 C 5 na Input Offset Current IOS pa C TA 7 C 3 3 na C TA +5 C 5 na Input Voltage Range VCM V Common-Mode Rejection Ratio CMRR VCM = V to +5 V db Input Impedance RIN Ω Large Signal Voltage Gain AVO RL = kω, V/mV VO = V to + V C TA 7 C 9 9 V/mV C TA +5 C 5 V/mV OUTPUT CHARACTERISTICS Maximum Output Voltage Swing VO RL = kω ± ±3.5 ±3 ±3.5 V C TA +7 C ± ±3 V C TA +5 C ±3 V RL = kω ±.5 ±3.3 V C TA +7 C ± ± V C TA +5 C ± V Short-Circuit Output Current ISC ±7 ±7 ma POWER SUPPLY Power Supply Rejection Ratio PSRR VDD = V to 3 V db Supply Current per Amplifier ISY.... ma C TA +7 C.9.9 ma C TA +5 C. ma DYNAMIC PERFORMANCE Slew Rate SR V/μs Gain Bandwidth Product GBP 5 5 MHz Phase Margin φm 3 3 Degrees Total Harmonic Distortion THD VIN = V rms, f = khz,.. % AV = +, RL = kω Channel Separation CS f = khz db NOISE PERFORMANCE Voltage Noise Density en f = khz nv/ Hz Rev. B Page 3 of
4 ADTL/ADTL ABSOLUTE MAXIMUM RATINGS Table. Parameter Rating Supply Voltage ± V or +3 V Input Voltage ±V supply Differential Input Voltage ±V supply Output Short Circuit to GND Indefinite Storage Temperature Range 5 C to +5 C Operating Temperature Range C to +5 C Lead Temperature (Soldering sec) 3 C Junction Temperature 5 C Stresses above those listed under Absolute Maximum Ratings may cause permanent damage to the device. This is a stress rating only; functional operation of the device at these or any other conditions above those indicated in the operational section of this specification is not implied. Exposure to absolute maximum rating conditions for extended periods may affect device reliability. THERMAL RESISTANCE Table 3. Thermal Resistance Package Type θja θjc Unit -Lead SOIC_N (R-) 5 3 C/W -Lead MSOP (RM-) 5 C/W -Lead SOIC_N (R-) 3 C/W -Lead TSSOP (RU-) 35 C/W POWER SEQUENCING The op amp supplies must be established simultaneously with, or before, the application of any input signals. If this is not possible, the input current must be limited to ma. ESD CAUTION Rev. B Page of
5 ADTL/ADTL TYPICAL PERFORMANCE CHARACTERISTICS V OM MAXIMUM PEAK OUTPUT VOLTAGE (±V) V SY = ±V V SY = ±5V R L = kω k k k M M FREQUENCY (Hz) Figure 5. Maximum Peak Output Voltage vs. Frequency 75-5 V OM MAXIMUM PEAK OUTPUT VOLTAGE (±V) R L = kω R L = kω Figure. Maximum Peak Output Voltage vs. Free-Air Temperature 75- V OM MAXIMUM PEAK OUTPUT VOLTAGE (±V) V SY = ±V V SY = ±5V R L = kω V OM MAXIMUM PEAK OUTPUT VOLTAGE (±V) k k k M M FREQUENCY (Hz) 75- k R L LOAD RESISTANCE (Ω) k 75-9 Figure. Maximum Peak Output Voltage vs. Frequency Figure 9. Maximum Peak Output Voltage vs. Load Resistance V OM MAXIMUM PEAK OUTPUT VOLTAGE (±V) T A = 55 C T A = +5 C R L = kω T A = +5 C k k M M FREQUENCY (Hz) Figure 7. Maximum Peak Output Voltage vs. Frequency 75-7 V OM MAXIMUM PEAK OUTPUT VOLTAGE (±V) R L = Ω ± ±5 ± ±7 ± ±9 ± ± ± ±3 ± ±5 V SY SUPPLY VOLTAGE (V) Figure. Maximum Peak Output Voltage vs. Supply Voltage 75- Rev. B Page 5 of
6 ADTL/ADTL A VD LARGE SIGNAL DIFFERENTIAL VOLTAGE AMPLIFICATION (V/mV) k V O = ±V R L = kω PD TOTAL POWER DISSIPATION (mw) NO SIGNAL NO LOAD Figure. Large Signal Differential Voltage Amplification vs. Free-Air Temperature Figure. Total Power Dissipation vs. Free-Air Temperature 75-. I SY SUPPLY CURRENT (ma) NO SIGNAL NO LOAD I B INPUT BIAS CURRENT (na) Figure. Supply Current Per Amplifier vs. Free-Air Temperature Figure 5. Input Bias Current vs. Free-Air Temperature 75-5 I SY SUPPLY CURRENT (ma) NO SIGNAL NO LOAD IB INPUT BIAS CURRENT (na)..... ± ±5 ± ±7 ± ±9 ± ± ± ±3 ± ±5 V SY SUPPLY VOLTAGE (V) Figure 3. Supply Current vs. Supply Voltage Figure. Input Bias Current vs. Free-Air Temperature 75- Rev. B Page of
7 ADTL/ADTL INPUT AND OUTPUT VOLTAGE (V) OUTPUT INPUT R L = kω C L = pf V N EQUIVALENT INPUT NOISE VOLTAGE (nv/ Hz) A V = k TIME (µs) Figure 7. Large Signal Response 75-7 k k FREQUENCY (Hz) Figure. Voltage Noise Density vs. Frequency 75- V O OUTPUT VOLTAGE (V) R L = kω C L = pf THD TOTAL HARMONIC DISTORTION (%)... A V = Vi (rms) = V ELAPSED TIME (µs) Figure. Small Signal Response 75-. FREQUENCY (Hz) Figure. Total Harmonic Distortion vs. Frequency 75- CMRR COMMON MODE REJECTION RATIO (db) Figure 9. Common-Mode Rejection Ratio vs. Free-Air Temperature 75-9 Rev. B Page 7 of
8 ADTL/ADTL OUTLINE DIMENSIONS 5. (.9). (.9). (.57) 3. (.97) 5. (.) 5. (.).5 (.9). (.) COPLANARITY. SEATING PLANE.7 (.5) BSC.75 (.).35 (.53).5 (.).3 (.).5 (.9).7 (.7).5 (.9).5 (.99).7 (.5). (.57) 5 COMPLIANT TO JEDEC STANDARDS MS--AA CONTROLLING DIMENSIONS ARE IN MILLIMETERS; INCH DIMENSIONS (IN PARENTHESES) ARE ROUNDED-OFF MILLIMETER EQUIVALENTS FOR REFERENCE ONLY AND ARE NOT APPROPRIATE FOR USE IN DESIGN. Figure. -Lead Standard Small Outline Package [SOIC_N] Narrow Body (R-) Dimensions shown in millimeters and (inches) 7-A PIN.5 BSC.3. COPLANARITY.. MAX SEATING PLANE COMPLIANT TO JEDEC STANDARDS MO-7-AA Figure 3. -Lead Mini Small Outline Package [MSOP] (RM-) Dimensions shown in millimeters Rev. B Page of
9 ADTL/ADTL.75 (.35).55 (.33). (.575) 3. (.9) 7. (.) 5. (.3).5 (.9). (.39) COPLANARITY..7 (.5) BSC.5 (.).3 (.).75 (.9).35 (.53) SEATING PLANE.5 (.9).7 (.7).5 (.97).5 (.9).7 (.5). (.57) 5 COMPLIANT TO JEDEC STANDARDS MS--AB CONTROLLING DIMENSIONS ARE IN MILLIMETERS; INCH DIMENSIONS (IN PARENTHESES) ARE ROUNDED-OFF MILLIMETER EQUIVALENTS FOR REFERENCE ONLY AND ARE NOT APPROPRIATE FOR USE IN DESIGN. Figure. -Lead Standard Small Outline Package [SOIC_N] Narrow Body (R-) Dimensions shown in millimeters and (inches) -A BSC PIN BSC.3.9. MAX SEATING PLANE..9 COPLANARITY. COMPLIANT TO JEDEC STANDARDS MO-53-AB- Figure 5. -Lead Thin Shrink Small Outline Package [TSSOP] (RU-) Dimensions shown in millimeters Rev. B Page 9 of
10 ADTL/ADTL ORDERING GUIDE Model Temperature Range Package Description Package Option Branding ADTLJR C to +7 C -Lead SOIC_N R- ADTLJR-REEL C to +7 C -Lead SOIC_N R- ADTLJR-REEL7 C to +7 C -Lead SOIC_N R- ADTLJRZ C to +7 C -Lead SOIC_N R- ADTLJRZ-REEL C to +7 C -Lead SOIC_N R- ADTLJRZ-REEL7 C to +7 C -Lead SOIC_N R- ADTLARZ C to +5 C -Lead SOIC_N R- ADTLARZ-REEL C to +5 C -Lead SOIC_N R- ADTLARZ-REEL7 C to +5 C -Lead SOIC_N R- ADTLARMZ-R C to +5 C -Lead MSOP RM- A ADTLARMZ-REEL C to +5 C -Lead MSOP RM- A ADTLJR C to +7 C -Lead SOIC_N R- ADTLJR-REEL C to +7 C -Lead SOIC_N R- ADTLJR-REEL7 C to +7 C -Lead SOIC_N R- ADTLJRZ C to +7 C -Lead SOIC_N R- ADTLJRZ-REEL C to +7 C -Lead SOIC_N R- ADTLJRZ-REEL7 C to +7 C -Lead SOIC_N R- ADTLARZ C to +5 C -Lead SOIC_N R- ADTLARZ-REEL C to +5 C -Lead SOIC_N R- ADTLARZ-REEL7 C to +5 C -Lead SOIC_N R- ADTLARUZ C to +5 C -lead TSSOP RU- ADTLARUZ-REEL C to +5 C -lead TSSOP RU- Z = RoHS Compliant Part. Rev. B Page of
11 ADTL/ADTL NOTES Rev. B Page of
12 ADTL/ADTL NOTES 7 Analog Devices, Inc. All rights reserved. Trademarks and registered trademarks are the property of their respective owners. D75--/7(B) Rev. B Page of
13 Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Analog Devices Inc.: ADTLARMZ ADTLARZ ADTLARUZ ADTLARZ ADTLARMZ-REEL ADTLARZ-REEL ADTLARZ-REEL7 ADTLARUZ-REEL ADTLARZ-REEL ADTLARZ-REEL7
Low Cost JFET Input Operational Amplifiers ADTL082/ADTL084
Preliminary Technical Data FEATURES TL082 / TL08 compatible Low input bias current: 0 pa max Offset voltage: 5mV max (ADTL082A/ADTL08A) 9 mv max (ADTL082/ADTL08) ±5 V to ±5 V operation Low noise: 5 nv/
More informationDual, Ultralow Distortion, Ultralow Noise Op Amp AD8599
Dual, Ultralow Distortion, Ultralow Noise Op Amp FEATURES Low noise: 1 nv/ Hz at 1 khz Low distortion: 5 db THD @ khz
More information16 V, 4 MHz RR0 Amplifiers AD8665/AD8666/AD8668
6 V, MHz RR Amplifiers AD8665/AD8666/AD8668 FEATURES Offset voltage:.5 mv max Low input bias current: pa max Single-supply operation: 5 V to 6 V Dual-supply operation: ±.5 V to ±8 V Low noise: 8 nv/ Hz
More informationUltraprecision, 36 V, 2.8 nv/ Hz Dual Rail-to-Rail Output Op Amp AD8676
FEATURES Very low voltage noise 2.8 nv/ Hz @ khz Rail-to-rail output swing Low input bias current: 2 na maximum Very low offset voltage: 2 μv typical Low input offset drift:.6 μv/ C maximum Very high gain:
More informationUltraprecision, 36 V, 2.8 nv/ Hz Dual Rail-to-Rail Output Op Amp AD8676
Ultraprecision, 36 V, 2. nv/ Hz Dual Rail-to-Rail Output Op Amp AD676 FEATURES Very low voltage noise: 2. nv/ Hz @ khz Rail-to-rail output swing Low input bias current: 2 na maximum Very low offset voltage:
More informationLow Cost, Precision JFET Input Operational Amplifiers ADA4000-1/ADA4000-2/ADA4000-4
Low Cost, Precision JFET Input Operational Amplifiers ADA-/ADA-/ADA- FEATURES High slew rate: V/μs Fast settling time Low offset voltage:.7 mv maximum Bias current: pa maximum ± V to ±8 V operation Low
More information15 MHz, Rail-to-Rail, Dual Operational Amplifier OP262-EP
5 MHz, Rail-to-Rail, Dual Operational Amplifier OP262-EP FEATURES Supports defense and aerospace applications (AQEC standard) Military temperature range ( 55 C to +25 C) Controlled manufacturing baseline
More informationLow Power, Rail-to-Rail Output, Precision JFET Amplifiers AD8641/AD8642/AD8643
Data Sheet Low Power, Rail-to-Rail Output, Precision JFET Amplifiers AD864/AD8642/AD8643 FEATURES Low supply current: 25 μa max Very low input bias current: pa max Low offset voltage: 75 μv max Single-supply
More informationLow Power, Precision, Auto-Zero Op Amps AD8538/AD8539 FEATURES Low offset voltage: 13 μv maximum Input offset drift: 0.03 μv/ C Single-supply operatio
Low Power, Precision, Auto-Zero Op Amps FEATURES Low offset voltage: 3 μv maximum Input offset drift:.3 μv/ C Single-supply operation: 2.7 V to 5.5 V High gain, CMRR, and PSRR Low input bias current: 25
More informationAD864/AD8642/AD8643 TABLE OF CONTENTS Specifications... 3 Electrical Characteristics... 3 Absolute Maximum Ratings... 5 ESD Caution... 5 Typical Perfo
FEATURES Low supply current: 25 µa max Very low input bias current: pa max Low offset voltage: 75 µv max Single-supply operation: 5 V to 26 V Dual-supply operation: ±2.5 V to ±3 V Rail-to-rail output Unity-gain
More informationTABLE OF CONTENTS Features... Applications... Pin Configurations... General Description... Revision History... 2 Specifications... 3 Absolute Maximum
FEATURES Offset voltage: 2.5 mv maximum Single-supply operation: 2.7 V to 5.5 V Low noise: 8 nv/ Hz Wide bandwidth: 24 MHz Slew rate: V/μs Short-circuit output current: 2 ma No phase reversal Low input
More informationAD8613/AD8617/AD8619. Low Cost Micropower, Low Noise CMOS Rail-to-Rail, Input/Output Operational Amplifiers PIN CONFIGURATIONS FEATURES APPLICATIONS
Low Cost Micropower, Low Noise CMOS Rail-to-Rail, Input/Output Operational Amplifiers FEATURES Offset voltage: 2.2 mv maximum Low input bias current: pa maximum Single-supply operation:.8 V to 5 V Low
More informationPrecision, Low Noise, CMOS, Rail-to-Rail, Input/Output Operational Amplifiers AD8605/AD8606/AD8608
Precision, Low Noise, CMOS, Rail-to-Rail, Input/Output Operational Amplifiers AD8605/AD8606/AD8608 FEATURES Low offset voltage: 65 μv maximum Low input bias currents: pa maximum Low noise: 8 nv/ Hz Wide
More information24 MHz Rail-to-Rail Amplifiers with Shutdown Option AD8646/AD8647/AD8648
24 MHz Rail-to-Rail Amplifiers with Shutdown Option AD8646/AD8647/AD8648 FEATURES Offset voltage: 2.5 mv maximum Single-supply operation: 2.7 V to 5.5 V Low noise: 8 nv/ Hz Wide bandwidth: 24 MHz Slew
More informationDual Precision, Low Cost, High Speed BiFET Op Amp AD712-EP
Dual Precision, Low Cost, High Speed BiFET Op Amp FEATURES Supports defense and aerospace applications (AQEC standard) Military temperature range ( 55 C to +125 C) Controlled manufacturing baseline One
More informationSingle-Supply, Rail-to-Rail, Low Power, FET Input Op Amp AD820
Single-Supply, Rail-to-Rail, Low Power, FET Input Op Amp AD820 FEATURES True single-supply operation Output swings rail-to-rail Input voltage range extends below ground Single-supply capability from 5
More informationMicropower Precision CMOS Operational Amplifier AD8500
Micropower Precision CMOS Operational Amplifier AD85 FEATURES Supply current: μa maximum Offset voltage: mv maximum Single-supply or dual-supply operation Rail-to-rail input and output No phase reversal
More information4 MHz, 7 nv/ Hz, Low Offset and Drift, High Precision Amplifier ADA EP
Enhanced Product FEATURES Low offset voltage and low offset voltage drift Maximum offset voltage: 9 µv at TA = 2 C Maximum offset voltage drift:.2 µv/ C Moisture sensitivity level (MSL) rated Low input
More information150 μv Maximum Offset Voltage Op Amp OP07D
5 μv Maximum Offset Voltage Op Amp OP7D FEATURES Low offset voltage: 5 µv max Input offset drift:.5 µv/ C max Low noise:.25 μv p-p High gain CMRR and PSRR: 5 db min Low supply current:. ma Wide supply
More informationSingle and Dual, Ultralow Distortion, Ultralow Noise Op Amps AD8597/AD8599 PIN CONFIGURATIONS FEATURES APPLICATIONS
Single and Dual, Ultralow Distortion, Ultralow Noise Op Amps FEATURES Low noise:. nv/ Hz at khz Low distortion: db THD @ khz Input noise,. Hz to Hz:
More information10-Channel Gamma Buffer with VCOM Driver ADD8710
1-Channel Gamma Buffer with VCOM Driver ADD871 FEATURES Single-supply operation: 4.5 V to 18 V Upper/lower buffers swing to VS/GND Gamma continuous output current: >1 ma VCOM peak output current: 25 ma
More informationGeneral-Purpose CMOS Rail-to-Rail Amplifiers AD8541/AD8542/AD8544
General-Purpose CMOS Rail-to-Rail Amplifiers AD854/AD8542/AD8544 FEATURES Single-supply operation: 2.7 V to 5.5 V Low supply current: 45 μa/amplifier Wide bandwidth: MHz No phase reversal Low input currents:
More informationDual Low Offset, Low Power Operational Amplifier OP200
Dual Low Offset, Low Power Operational Amplifier OP200 FEATURES Low input offset voltage: 75 μv maximum Low offset voltage drift, over 55 C < TA < +25 C 0.5 μv/ C maximum Low supply current (per amplifier):
More informationGeneral-Purpose CMOS Rail-to-Rail Amplifiers AD8541/AD8542/AD8544
General-Purpose CMOS Rail-to-Rail Amplifiers FEATURES Single-supply operation: 2.7 V to 5.5 V Low supply current: 45 μa/amplifier Wide bandwidth: MHz No phase reversal Low input currents: 4 pa Unity gain
More information16 V, 1 MHz, CMOS Rail-to-Rail Input/Output Operational Amplifier ADA4665-2
6 V, MHz, CMOS Rail-to-Rail Input/Output Operational Amplifier ADA4665-2 FEATURES Lower power at high voltage: 29 μa per amplifier typical Low input bias current: pa maximum Wide bandwidth:.2 MHz typical
More informationDual/Quad Low Power, High Speed JFET Operational Amplifiers OP282/OP482
Dual/Quad Low Power, High Speed JFET Operational Amplifiers OP282/OP482 FEATURES High slew rate: 9 V/μs Wide bandwidth: 4 MHz Low supply current: 2 μa/amplifier maximum Low offset voltage: 3 mv maximum
More informationPrecision, Very Low Noise, Low Input Bias Current Operational Amplifiers
Data Sheet Precision, Very Low Noise, Low Input Bias Current Operational Amplifiers AD8671/AD8672/AD8674 FEATURES Very low noise: 2.8 nv/ Hz, 77 nv p-p Wide bandwidth: 1 MHz Low input bias current: 12
More informationUltraprecision Operational Amplifier OP177
Ultraprecision Operational Amplifier FEATURES Ultralow offset voltage TA = 25 C, 25 μv maximum Outstanding offset voltage drift 0. μv/ C maximum Excellent open-loop gain and gain linearity 2 V/μV typical
More informationHigh Common-Mode Voltage, Programmable Gain Difference Amplifier AD628
High Common-Mode Voltage, Programmable Gain Difference Amplifier AD628 FEATURES FUNCTIONAL BLOCK DIAGRAM High common-mode input voltage range ±20 V at VS = ±5 V Gain range 0. to 00 Operating temperature
More informationDual/Quad Low Power, High Speed JFET Operational Amplifiers OP282/OP482
Dual/Quad Low Power, High Speed JFET Operational Amplifiers OP22/OP42 FEATURES High slew rate: 9 V/µs Wide bandwidth: 4 MHz Low supply current: 2 µa/amplifier max Low offset voltage: 3 mv max Low bias
More informationUltralow Offset Voltage Operational Amplifier OP07
Ultralow Offset Voltage Operational Amplifier OP07 FEATURES Low VOS: 75 μv maximum Low VOS drift:.3 μv/ C maximum Ultrastable vs. time:.5 μv per month maximum Low noise: 0.6 μv p-p maximum Wide input voltage
More information1.8 V, Micropower, Zero-Drift, Rail-to-Rail Input/Output Op Amp ADA4051-2
.8 V, Micropower, Zero-Drift, Rail-to-Rail Input/Output Op Amp ADA45-2 FEATURES Very low supply current: 3 μa Low offset voltage: 5 μv maximum Offset voltage drift: 2 nv/ C Single-supply operation:.8 V
More informationVery Low Distortion, Precision Difference Amplifier AD8274
Very Low Distortion, Precision Difference Amplifier AD8274 FEATURES Very low distortion.2% THD + N (2 khz).% THD + N ( khz) Drives Ω loads Excellent gain accuracy.3% maximum gain error 2 ppm/ C maximum
More information1.8 V Low Power CMOS Rail-to-Rail Input/Output Operational Amplifier AD8515
Data Sheet FEATURES Single-supply operation: 1.8 V to 5 V Offset voltage: 6 mv maximum Space-saving SOT-23 and SC7 packages Slew rate: 2.7 V/μs Bandwidth: 5 MHz Rail-to-rail input and output swing Low
More informationQuad Low Offset, Low Power Operational Amplifier OP400
Quad Low Offset, Low Power Operational Amplifier OP4 FEATURES Low input offset voltage 5 μv max Low offset voltage drift over 55 C to 25 C,.2 pv/ C max Low supply current (per amplifier) 725 μa max High
More informationRail-to-Rail, High Output Current Amplifier AD8397
Rail-to-Rail, High Output Current Amplifier FEATURES Dual operational amplifier Voltage feedback Wide supply range from 3 V to 24 V Rail-to-rail output Output swing to within.5 V of supply rails High linear
More informationAD8603/AD8607/AD8609. Precision Micropower, Low Noise CMOS Rail-to-Rail Input/Output Operational Amplifiers
Precision Micropower, Low Noise CMOS Rail-to-Rail Input/Output Operational Amplifiers FEATURES Low offset voltage: μv max Low input bias current: 1 pa max Single-supply operation: 1.8 V to 5 V Low noise:
More informationDual Picoampere Input Current Bipolar Op Amp AD706. Data Sheet. Figure 1. Input Bias Current vs. Temperature
Data Sheet Dual Picoampere Input Current Bipolar Op Amp Rev. F Document Feedback Information furnished by Analog Devices is believed to be accurate and reliable. However, no responsibility is assumed by
More informationQuad 7 ns Single Supply Comparator AD8564
Quad 7 ns Single Supply Comparator AD8564 FEATURES 5 V single-supply operation 7 ns propagation delay Low power Separate input and output sections TTL/CMOS logic-compatible outputs Wide output swing TSSOP,
More informationZero Drift, Unidirectional Current Shunt Monitor AD8219
Zero Drift, Unidirectional Current Shunt Monitor FEATURES High common-mode voltage range 4 V to 8 V operating.3 V to +85 V survival Buffered output voltage Gain = 6 V/V Wide operating temperature range:
More informationUltralow Offset Voltage Dual Op Amp AD708
Ultralow Offset Voltage Dual Op Amp FEATURES Very high dc precision 30 μv maximum offset voltage 0.3 μv/ C maximum offset voltage drift 0.35 μv p-p maximum voltage noise (0. Hz to 0 Hz) 5 million V/V minimum
More informationVery Low Distortion, Dual-Channel, High Precision Difference Amplifier AD8274 FUNCTIONAL BLOCK DIAGRAM +V S FEATURES APPLICATIONS GENERAL DESCRIPTION
Very Low Distortion, Dual-Channel, High Precision Difference Amplifier AD8273 FEATURES ±4 V HBM ESD Very low distortion.25% THD + N (2 khz).15% THD + N (1 khz) Drives 6 Ω loads Two gain settings Gain of
More informationLow Power, Wide Supply Range, Low Cost Unity-Gain Difference Amplifier AD8276
Low Power, Wide Supply Range, Low Cost Unity-Gain Difference Amplifier AD87 FEATURES Wide input range Rugged input overvoltage protection Low supply current: μa maximum Low power dissipation:. mw at VS
More informationQuad Low Offset, Low Power Operational Amplifier OP400
FEATURES Low input offset voltage: 5 µv maximum Low offset voltage drift over 55 C to 25 C:.2 μv/ C maximum Low supply current (per amplifier): 725 µa maximum High open-loop gain: 5 V/mV minimum Input
More informationUltralow Power, Rail-to-Rail Output Operational Amplifiers OP281/OP481
Ultralow Power, Rail-to-Rail Output Operational Amplifiers OP28/OP48 FEATURES Low supply current: 4 μa/amplifier maximum Single-supply operation: 2.7 V to 2 V Wide input voltage range Rail-to-rail output
More informationUltralow Offset Voltage Operational Amplifier OP07
FEATURES Low VOS: 5 μv maximum Low VOS drift:. μv/ C maximum Ultrastable vs. time:.5 μv per month maximum Low noise:. μv p-p maximum Wide input voltage range: ± V typical Wide supply voltage range: ± V
More informationSingle-Supply, Rail-to-Rail, Low Power, FET Input Op Amp AD820
Single-Supply, Rail-to-Rail, Low Power, FET Input Op Amp AD82 FEATURES True single-supply operation Output swings rail-to-rail Input voltage range extends below ground Single-supply capability from 5 V
More informationDual Picoampere Input Current Bipolar Op Amp AD706
Dual Picoampere Input Current Bipolar Op Amp FEATURES High DC Precision V Max Offset Voltage.5 V/ C Max Offset Drift 2 pa Max Input Bias Current.5 V p-p Voltage Noise,. Hz to Hz 75 A Supply Current Available
More informationPrecision Low Power Single-Supply JFET Amplifiers AD8625/AD8626/AD8627
Precision Low Power Single-Supply JFET Amplifiers AD8625/AD8626/AD8627 FEATURES SC7 package Very low IB: pa max Single-supply operation: 5 V to 26 V Dual-supply operation: ±2.5 V to ±3 V Rail-to-rail output
More informationZero Drift, Digitally Programmable Instrumentation Amplifier AD8231-EP OP FUNCTIONAL BLOCK DIAGRAM FEATURES ENHANCED PRODUCT FEATURES
Zero Drift, Digitally Programmable Instrumentation Amplifier AD8231-EP FEATURES Digitally/pin-programmable gain G = 1, 2, 4, 8, 16, 32, 64, or 128 Specified from 55 C to +125 C 5 nv/ C maximum input offset
More informationSingle-Supply, Rail-to-Rail, Low Power FET-Input Op Amp AD820
Single-Supply, Rail-to-Rail, Low Power FET-Input Op Amp AD82 FEATURES True single-supply operation Output swings rail-to-rail Input voltage range extends below ground Single-supply capability from 5 V
More informationHigh Resolution, Zero-Drift Current Shunt Monitor AD8217
High Resolution, Zero-Drift Current Shunt Monitor AD8217 FEATURES High common-mode voltage range 4.5 V to 8 V operating V to 85 V survival Buffered output voltage Wide operating temperature range: 4 C
More informationAD MHz, 20 V/μs, G = 1, 10, 100, 1000 i CMOS Programmable Gain Instrumentation Amplifier. Preliminary Technical Data FEATURES
Preliminary Technical Data 0 MHz, 20 V/μs, G =, 0, 00, 000 i CMOS Programmable Gain Instrumentation Amplifier FEATURES Small package: 0-lead MSOP Programmable gains:, 0, 00, 000 Digital or pin-programmable
More informationHigh Voltage, Current Shunt Monitor AD8215
High Voltage, Current Shunt Monitor AD825 FEATURES ±4 V HBM ESD High common-mode voltage range 2 V to +65 V operating 3 V to +68 V survival Buffered output voltage Wide operating temperature range 8-Lead
More informationPrecision Instrumentation Amplifier AD524
Precision Instrumentation Amplifier AD54 FEATURES Low noise: 0.3 μv p-p at 0. Hz to 0 Hz Low nonlinearity: 0.003% (G = ) High CMRR: 0 db (G = 000) Low offset voltage: 50 μv Low offset voltage drift: 0.5
More informationUltralow Input Bias Current Operational Amplifier AD549
Ultralow Input Bias Current Operational Amplifier AD59 FEATURES Ultralow input bias current 60 fa maximum (AD59L) 250 fa maximum (AD59J) Input bias current guaranteed over the common-mode voltage range
More informationAD8218 REVISION HISTORY
Zero Drift, Bidirectional Current Shunt Monitor FEATURES High common-mode voltage range 4 V to 8 V operating.3 V to 85 V survival Buffered output voltage Gain = 2 V/V Wide operating temperature range:
More informationLow Cost, High Speed, Rail-to-Rail, Output Op Amps ADA4851-1/ADA4851-2/ADA4851-4
Low Cost, High Speed, Rail-to-Rail, Output Op Amps ADA485-/ADA485-/ADA485-4 FEATURES High speed 3 MHz, 3 db bandwidth 375 V/μs slew rate 55 ns settling time to.% Excellent video specifications. db flatness:
More informationPrecision Low Power Single-Supply JFET Amplifier AD8627/AD8626/AD8625
Precision Low Power Single-Supply JFET Amplifier FEATURES SC7 package Very low IB: pa max Single-supply operation: 5 V to 26 V Dual-supply operation: ±2.5 V to ±3 V Rail-to-rail output Low supply current:
More informationSingle-Supply, Rail-to-Rail Low Power FET-Input Op Amp AD822
Single-Supply, Rail-to-Rail Low Power FET-Input Op Amp AD822 FEATURES True single-supply operation Output swings rail-to-rail Input voltage range extends below ground Single-supply capability from 3 V
More informationLow Cost, High Speed Differential Amplifier AD8132
Low Cost, High Speed Differential Amplifier FEATURES High speed 350 MHz, 3 db bandwidth 1200 V/μs slew rate Resistor set gain Internal common-mode feedback Improved gain and phase balance 68 db @ 10 MHz
More information1.8 V, Micropower, Zero-Drift, Rail-to-Rail Input/Output Op Amp ADA4051-1/ADA4051-2
.8 V, Micropower, Zero-Drift, Rail-to-Rail Input/Output Op Amp ADA-/ADA-2 FEATURES Very low supply current: 3 μa typical Low offset voltage: μv maximum Offset voltage drift: 2 nv/ C Single-supply operation:.8
More informationDual Low Power Operational Amplifier, Single or Dual Supply OP221
a FEATURES Excellent TCV OS Match, 2 V/ C Max Low Input Offset Voltage, 15 V Max Low Supply Current, 55 A Max Single Supply Operation, 5 V to 3 V Low Input Offset Voltage Drift,.75 V/ C High Open-Loop
More informationDual Picoampere Input Current Bipolar Op Amp AD706
Dual Picoampere Input Current Bipolar Op Amp FEATURES High DC Precision V Max Offset Voltage.5 V/ C Max Offset Drift 2 pa Max Input Bias Current.5 V p-p Voltage Noise,. Hz to Hz 75 A Supply Current Available
More information6 db Differential Line Receiver
a FEATURES High Common-Mode Rejection DC: 9 db typ Hz: 9 db typ khz: 8 db typ Ultralow THD:.% typ @ khz Fast Slew Rate: V/ s typ Wide Bandwidth: 7 MHz typ (G = /) Two Gain Levels Available: G = / or Low
More informationSelf-Contained Audio Preamplifier SSM2019
a FEATURES Excellent Noise Performance:. nv/ Hz or.5 db Noise Figure Ultra-low THD:
More informationLow Power, Wide Supply Range, Low Cost Difference Amplifiers, G = ½, 2 AD8278/AD8279
Low Power, Wide Supply Range, Low Cost Difference Amplifiers, G = ½, 2 /AD8279 FEATURES Wide input range beyond supplies Rugged input overvoltage protection Low supply current: 2 μa maximum (per amplifier)
More informationHigh Voltage, Current Shunt Monitor AD8215
FEATURES ±4 V human body model (HBM) ESD High common-mode voltage range V to +6 V operating 3 V to +68 V survival Buffered output voltage Wide operating temperature range 8-Lead SOIC: 4 C to + C Excellent
More informationUltraprecision Operational Amplifier OP177
Ultraprecision Operational Amplifier FEATURES Ultralow offset voltage TA = 5 C, 5 μv maximum Outstanding offset voltage drift. μv/ C maximum Excellent open-loop gain and gain linearity V/μV typical CMRR:
More informationADA485-/ADA485- TABLE OF CONTENTS Features... Applications... Pin Configurations... General Description... Revision History... Specifications... 3 Spe
NC NC NC NC 5 6 7 8 6 NC 4 PD 3 PD FEATURES Ultralow power-down current: 5 na/amplifier maximum Low quiescent current:.4 ma/amplifier High speed 75 MHz, 3 db bandwidth V/μs slew rate 85 ns settling time
More informationTABLE OF CONTENTS AD8625/AD8626/AD8627 Specifications... 3 Electrical Characteristics... 3 Electrical Characteristics... 4 Absolute Maximum Ratings...
Precision Low Power Single-Supply JFET Amplifiers AD8625/AD8626/AD8627 FEATURES SC7 package Very low IB: pa max Single-supply operation: 5 V to 26 V Dual-supply operation: ±2.5 V to ±3 V Rail-to-rail output
More informationPrecision Low Power Single-Supply JFET Amplifiers AD8625/AD8626/AD8627
Precision Low Power Single-Supply JFET Amplifiers AD8625/AD8626/AD8627 FEATURES SC7 package Very low IB: pa max Single-supply operation: 5 V to 26 V Dual-supply operation: ±2.5 V to ±3 V Rail-to-rail output
More informationPrecision, 16 MHz CBFET Op Amp AD845
a FEATURES Replaces Hybrid Amplifiers in Many Applications AC PERFORMANCE: Settles to 0.01% in 350 ns 100 V/ s Slew Rate 12.8 MHz Min Unity Gain Bandwidth 1.75 MHz Full Power Bandwidth at 20 V p-p DC PERFORMANCE:
More informationZero-Drift, High Voltage, Bidirectional Difference Amplifier AD8207
Zero-Drift, High Voltage, Bidirectional Difference Amplifier FEATURES Ideal for current shunt applications EMI filters included μv/ C maximum input offset drift High common-mode voltage range 4 V to +65
More informationSingle-Supply, Rail-to-Rail Low Power FET-Input Op Amp AD822
Single-Supply, Rail-to-Rail Low Power FET-Input Op Amp AD8 FEATURES True single-supply operation Output swings rail-to-rail Input voltage range extends below ground Single-supply capability from 5 V to
More informationHigh Common-Mode Voltage, Programmable Gain Difference Amplifier AD628
High Common-Mode Voltage, Programmable Gain Difference Amplifier FEATURES High common-mode input voltage range ±2 V at VS = ± V Gain range. to Operating temperature range: 4 C to ±8 C Supply voltage range
More informationSingle Supply, Rail to Rail Low Power FET-Input Op Amp AD820
a FEATURES True Single Supply Operation Output Swings Rail-to-Rail Input Voltage Range Extends Below Ground Single Supply Capability from V to V Dual Supply Capability from. V to 8 V Excellent Load Drive
More informationAD8601/AD8602/AD8604. Precision CMOS, Single-Supply, Rail-to-Rail, Input/Output Wideband Operational Amplifiers FEATURES PIN CONFIGURATIONS
Precision CMOS, Single-Supply, Rail-to-Rail, Input/Output Wideband Operational Amplifiers FEATURES Low offset voltage: 5 μv maximum Single-supply operation: 2.7 V to 5.5 V Low supply current: 75 μa/amplifier
More informationAD8510/AD8512/AD8513. Precision, Very Low Noise, Low Input Bias Current, Wide Bandwidth JFET Operational Amplifiers FEATURES PIN CONFIGURATIONS
Precision, Very Low Noise, Low Input Bias Current, Wide Bandwidth JFET Operational Amplifiers AD5/AD5/AD5 FEATURES Fast settling time: 5 ns to.% Low offset voltage: μv maximum Low TCVOS: μv/ C typical
More informationLC 2 MOS 5 Ω RON SPST Switches ADG451/ADG452/ADG453
LC 2 MOS 5 Ω RON SPST Switches ADG45/ADG452/ADG453 FEATURES Low on resistance (4 Ω) On resistance flatness (0.2 Ω) 44 V supply maximum ratings ±5 V analog signal range Fully specified at ±5 V, 2 V, ±5
More informationHigh Voltage, Bidirectional Current Shunt Monitor AD8210
High Voltage, Bidirectional Current Shunt Monitor FEATURES ±4 V HBM ESD High common-mode voltage range 2 V to +65 V operating 5 V to +68 V survival Buffered output voltage 5 ma output drive capability
More informationSingle-Supply, Rail-to-Rail Low Power FET-Input Op Amp AD822
Single-Supply, Rail-to-Rail Low Power FET-Input Op Amp AD822 FEATURES True single-supply operation Output swings rail-to-rail Input voltage range extends below ground Single-supply capability from 3 V
More information9- and 11-Channel, Muxed Input LCD Reference Buffers AD8509/AD8511
9- and -Channel, Muxed Input LCD Reference Buffers AD8509/AD85 FEATURES Single-supply operation: 3.3 V to 6.5 V High output current: 300 ma Low supply current: 6 ma Stable with 000 pf loads Pin compatible
More informationLow Cost Low Power Instrumentation Amplifier AD620
Low Cost Low Power Instrumentation Amplifier AD60 FEATURES Easy to use Gain set with one external resistor (Gain range to 0,000) Wide power supply range (±.3 V to ±8 V) Higher performance than 3 op amp
More informationImproved Second Source to the EL2020 ADEL2020
Improved Second Source to the EL ADEL FEATURES Ideal for Video Applications.% Differential Gain. Differential Phase. db Bandwidth to 5 MHz (G = +) High Speed 9 MHz Bandwidth ( db) 5 V/ s Slew Rate ns Settling
More informationHigh Voltage Current Shunt Monitor AD8211
High Voltage Current Shunt Monitor AD8211 FEATURES Qualified for automotive applications ±4 V HBM ESD High common-mode voltage range 2 V to +65 V operating 3 V to +68 V survival Buffered output voltage
More information270 MHz, 400 μa Current Feedback Amplifier AD8005
Data Sheet 27 MHz, μa Current Feedback Amplifier AD85 FEATURES Ultralow power μa power supply current ( mw on ±5 VS) Specified for single supply operation High speed 27 MHz, 3 db bandwidth (G = +) 7 MHz,
More informationDual, High Voltage Current Shunt Monitor AD8213
Dual, High Voltage Current Shunt Monitor AD823 FEATURES ±4 V HBM ESD High common-mode voltage range 2 V to +6 V operating 3 V to +68 V survival Buffered output voltage Wide operating temperature range
More informationTABLE OF CONTENTS Features... Applications... General Description... Pin Configurations... Revision History... 2 Specifications... 3 Electrical Charac
6 V Rail-to-Rail Operational Amplifiers AD86/AD866/AD867 FEATURES Single-supply operation: 4. V to 6 V Input capability beyond the rails Rail-to-rail output swing Continuous output current: 3 ma Peak output
More informationHigh Speed, Low Power Dual Op Amp AD827
a FEATURES High Speed 50 MHz Unity Gain Stable Operation 300 V/ms Slew Rate 120 ns Settling Time Drives Unlimited Capacitive Loads Excellent Video Performance 0.04% Differential Gain @ 4.4 MHz 0.198 Differential
More informationLow Noise, Micropower 5.0 V Precision Voltage Reference ADR293-EP
Enhanced Product Low Noise, Micropower 5.0 V Precision Voltage Reference FEATURES 6.0 V to 15 V supply range Supply current: 15 μa maximum Low noise: 15 μv p-p typical (0.1 Hz to 10 Hz) High output current:
More informationHigh Common-Mode Voltage Programmable Gain Difference Amplifier AD628
High Common-Mode Voltage Programmable Gain Difference Amplifier FEATURES High common-mode input voltage range ±12 V at VS = ±15 V Gain range.1 to 1 Operating temperature range: 4 C to ±85 C Supply voltage
More informationLow Voltage Micropower Quad Operational Amplifier OP490
Low Voltage Micropower Quad Operational Amplifier FEATURES Single/dual-supply operation.6 V to 36 V ±0.8 V to ±8 V Single-supply operation; input and output voltage ranges include ground Low supply current:
More informationSingle-Supply, 42 V System Difference Amplifier AD8206
Single-Supply, 42 V System Difference Amplifier FEATURES Ideal for current shunt applications High common-mode voltage range 2 V to +65 V operating 25 V to +75 V survival Gain = 20 Wide operating temperature
More informationPrecision, Low Power, Micropower Dual Operational Amplifier OP290
Precision, Low Power, Micropower Dual Operational Amplifier OP9 FEATURES Single-/dual-supply operation:. V to 3 V, ±.8 V to ±8 V True single-supply operation; input and output voltage Input/output ranges
More informationSingle Supply, Rail to Rail Low Power FET-Input Op Amp AD820
a FEATURES True Single Supply Operation Output Swings Rail-to-Rail Input Voltage Range Extends Below Ground Single Supply Capability from + V to + V Dual Supply Capability from. V to 8 V Excellent Load
More information1 pc Charge Injection, 100 pa Leakage, CMOS, ±5 V/+5 V/+3 V Dual SPDT Switch ADG636
pc Charge Injection, pa Leakage, CMOS, ±5 V/+5 V/+3 V Dual SPDT Switch ADG636 FEATURES pc charge injection ±2.7 V to ±5.5 V dual supply +2.7 V to +5.5 V single supply Automotive temperature range: 4 C
More informationPrecision Micropower Single Supply Operational Amplifier OP777
a FEATURES Low Offset Voltage: 1 V Max Low Input Bias Current: 1 na Max Single-Supply Operation: 2.7 V to 3 V Dual-Supply Operation: 1.35 V to 15 V Low Supply Current: 27 A/Amp Unity Gain Stable No Phase
More informationHigh Common-Mode Rejection. Differential Line Receiver SSM2141 REV. B FUNCTIONAL BLOCK DIAGRAM FEATURES. High Common-Mode Rejection
a FEATURES High Common-Mode Rejection DC: 100 db typ 60 Hz: 100 db typ 20 khz: 70 db typ 40 khz: 62 db typ Low Distortion: 0.001% typ Fast Slew Rate: 9.5 V/ s typ Wide Bandwidth: 3 MHz typ Low Cost Complements
More informationHigh Voltage, Bidirectional Current Shunt Monitor AD8210
FEATURES ±4 V HBM ESD High common-mode voltage range 2 V to +65 V operating 5 V to +68 V survival Buffered output voltage 5 ma output drive capability Wide operating temperature range: 4 C to +125 C Ratiometric
More information