Optiva OTS-2 Ku-Band RF Fiber Optic Links

Size: px
Start display at page:

Download "Optiva OTS-2 Ku-Band RF Fiber Optic Links"

Transcription

1 Optiva OTS2 KuBand The Optiva OTS2 KuBand transmitter and receiver are ideal to construct downlink to Hz and uplink.750 to Hz transparent fiber optic links for antenna remoting, electronic warfare systems, broadband delay lines, signal processing systems and other highdynamicrange applications. Optiva satellite and microwave transmitters and receivers are SNMP compliant. They can be housed in the same chassis and monitored by the same Network Management System (NMS) as other Optiva cards to support transport of multiple signal formats and frequency bands in a single flexible platform. Applications Satcom KuBand Antenna Signal Distribution round Terminal & IntraFacility Links Site Diversity Systems Electronic Warfare (EW) Systems Broadband Delay Line and Signal Processing Systems Features / Benefits KuBand Uplink and Downlink Eliminates the performance and cost penalty of block up/ down conversion Low RIN Source Laser Provides highdynamicrange of >102 Hz 2/3 System Design The Optiva platform includes a wide range fiber optic transport products for satellite and microwave communications from 1 MHz to 40 Hz. These units can be used to construct transparent inter and intrafacility links for RF and microwave signal transport, antenna remoting, electronic warfare systems and other highdynamicrange applications. Optiva is a completely modular, hotswappable platform. Both 19 rackmount and compact tabletop, or wallmountable enclosures are available. The 3 RU 19 rackmount, fancooled enclosures Model OTCC16F can support up to 16 insert cards and utilize two dualredundant, hotswappable, 200 watt power supplies. The 1 RU 19 rackmount, fancooled enclosure Model: OTCC61U can accommodate 6 insert cards and utilizes two hotswappable 60 watt power supplies. Compact twoslot OT DTCR2 enclosures are also available that use an external wallmount power supply. MicroprocessorBased Transmitter Control for Laser Bias, Modulator Bias & Link ain Provides consistent high performance operation and allows for modulator lowbias operation and >102 Hz 2/3 SNMP V.1 and RS2 Monitor & Control Interface Flexible user interface options Compatible with EMCORE s Modular Optiva Platform Allows multiple format and frequency transport in a single chassis DWDM Operation Increases transport capacity without increasing fiber count Block Diagram RF in Transmitter Variable ain RF Preamp 20 RF Test Point Externally Modulated Transmitter Laser/Modulator Microprocessor Control PL Optical Output +10 mo min PR Receiver Optical Input mo max Photodiode Optical Preamp/Rx Microprocessor Control Variable ain RF Postamp 20 RF Test Point RFout satcomsales@emcore.com

2 Optiva OTS2 KuBand Performance Highlights Parameter Min Typical Max Units Frequency Range RF Input Power 5* 15^ Wavelength 1550 nm Hz Hz m Typical KuBand Downlink S21 Frequency Response Optical Output Power mo Operating Temperature Range C *Tx: RF amp 15 gain, attenuation range 0 to 15 ^Tx: RF amp 35 gain, attenuation range 0 to 15 Absolute Maximum Ratings Stresses in excess of the absolute maximum ratings can cause permanent damage to the device. These are absolute stress ratings only. Functional operation of the device is not implied at these or any other conditions in excess of those given in the operational sections of the datasheet. Exposure to absolute maximum ratings for extended periods can adversely affect device reliability. Typical KuBand Uplink S21 Frequency Response Parameter Symbol Min Max Units Operating Temperature T OP C Storage Temperature T ST C RF Input S in NA 5* 15^ *Tx: RF amp 15 gain ^Tx: RF amp 35 gain m Environmental Specifications Parameter Symbol Min Max Units Operating Temperature T OP C Operating Humidity, Maximum NonCondensing 95% Enclosure Options Operating Altitude, Above Sea Level Storage Temperature T ST C Storage Humidity, Maximum NonCondensing 95% ft m Storage Altitude, Above Sea Level 50,000 15,240 ft m satcomsales@emcore.com

3 Optiva OTS2 KuBand Transmitter & Receiver Optical Characteristics Parameter Symbol Condition Min Typical Max Units Wavelength l nm Optical Output Power PL mo Connector Return Loss 40 Optical Connector Type SC/APC Receiver Optical Input Power Pin +10 mo Receiver Responsivity 0.7 A/W Note: In order to prevent reflectioninduced distortion degradation, the laser should be connected to an optical cable having a return loss of at least 55 for discrete reflections and 30 for distributed reflections. KuBand Transmitter & Receiver RF Characteristics Parameter Condition Min Typical Max Units Operational Bandwidth RF Input Impedance 50 Ω RF Return Loss 15 Hz Hz RF Connectors 3.5 mm RF Test Point Reference Value, Relative to RF input or RF output* *Test point performance beyond the stated frequency range is provided; only the test point reference value tolerance may increase beyond the above stated +/ 1 DC Power Consumption Max Module Type Input Voltage (VDC) Max Current (@+70 C) Transmitter A Receiver ma satcomsales@emcore.com

4 Optiva OTS2 KuBand Link Performance KuBand Downlink Parameter Symbol Condition Min Typical Max Units RF Bandwidth Hz Link ain (+0 mo Rx optical Hz Link ain (+10 mo Rx optical input)*^ Noise Figure (+0 mo Rx optical input)^ Noise Figure (+10 mo Rx optical input)^ Input IP3^ Spurious Free Dynamic mo Rx Optical +10 mo Rx Optical Input m m Hz2/3 Hz2/3 ain Variation Any 36 MHz Any 500 MHz *Receiver RF output will change 2 for each 1 of Rx optical input power level change ^Performance based on OTS2T/S5 with RF Amp gain of 35, OTS2R/S5 with RF Amp gain of 15 B Link Performance KuBand Uplink: Parameter Symbol Condition Min Typical Max Units RF Bandwidth Hz Link ain (+0 mo Rx optical Hz Link ain (+10 mo Rx optical Hz Noise Figure (+0 mo Rx optical Hz Noise Figure (+10 mo Rx optical Hz Input Hz 6 5 m m Spurious Free Dynamic 0 mo Rx Optical +10 mo Rx Optical Input Hz2/3 Hz2/3 ain Variation Any 36 MHz Any 500 MHz *Receiver RF output will change 2 for each 1 of RX optical input power level change ^Performance based on OTS2T/S5 with RF Amp gain of 35, OTS2R/S5 with RF Amp gain of satcomsales@emcore.com

5 Optiva OTS2 KuBand Ordering Information: Transmitter Transmitter OTS2T / 3.5VVVVWW10XX12YYZ When ordering replace VVVV with one of the KuBand Frequency Options When ordering replace WW with one of the ITU Channel Options When ordering replace XX with one of the Optical Connector Options When ordering replace YY with one of the Variable ain RF Amplifier Options When ordering replace Z with one of the Enclosure Options KuBand Frequency Options (Hz) VVVV ITU Channel Options (THz / nm) WW Optical Connector Options XX Variable ain RF Amplifier Options () YY Enclosure Options Z 1012 = Hz Uplink SA = SC / APC FA = FC / APC 15 = 15 1 = Optiva Indoor Rack Mount Installation 14 = Hz Downlink EA = E2000 / APC 35 = 35 2 = Optiva Outdoor MiniHub Installation Ordering Information: Receiver Receiver OTS2R / 3.5WWWW10XX002YYZ When ordering replace WWWW with one of the KuBand Frequency Options When ordering replace XX with one of the Optical Connector Options When ordering replace YY with one of the Variable ain RF Amplifier Options When ordering replace Z with one of the Enclosure Options KuBand Frequency Options (Hz) WWWW 1012 = Hz Uplink Optical Connector Options XX Standard: SA = SC / APC Variable ain RF Amplifier Options () YY 15 = 15 Enclosure Options Z 1 = Optiva Indoor Rack Mount Installation 14 = Hz Downlink Optional: 35 = 35 2 = Optiva Outdoor MiniHub Installation FA = FC / APC EA = E2000 / APC satcomsales@emcore.com

6 Optiva OTS2 KuBand Mechanical Configuration Each Transmitter and Receiver module occupies two slots in the EMCORE Optiva Chassis. Laser Safety This product meets the appropriate standard in Title 21 of the Code of Federal Regulations (CFR). FDA/CDRH Class 1M laser product. All versions of this laser are Class 1M laser product, tested according to IEC :2007 / EN :2007. An additional warning for Class 1M laser products. For diverging beams, this warning shall state that viewing the laser output with certain optical instruments (for example: eye loupes, magnifiers, and microscopes) within a distance of 100 mm may pose an eye hazard. For collimated beams, this warning shall state that viewing the laser output with certain instruments designed for use at a distance (for example: telescopes and binoculars) may pose an eye hazard. Wavelength = 1.3/1.5 μm. Maximum power = 30 mw. INVISIBLE LASER RADIATION AVOID DIRECT EXPOSURE TO BEAM INVISIBLE LASER RADIATION IS EMITTED FROM THE END OF FIBER OR CONNECTOR Wavelength: 1.5 µm Max. Output: 50 mw Class 1M Laser Product Avoid direct exposure to beam Do not view beam directly with optical instruments INVISIBLE LASER RADIATION EMITTED FROM END OF FIBER OR CONNECTOR CLASS 1M LASER PRODUCT IEC :2007 EN :2007 MAX OUTPUT: 50 mw WAVELENTH: 1.5 µm ( to 1620 nm) Complies with 21 CRF and except for deviations pursuant to Laser Notice No. 50, dated June 24, REV.3 *Caution Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure. *IEC is a registered trademark of the International Electrotechnical Commision satcomsales@emcore.com

Optiva OTS-2 Ka-Band RF Fiber Optic Links

Optiva OTS-2 Ka-Band RF Fiber Optic Links Optiva OTS2 KaBand The Optiva OTS2 KaBand transmitter and receiver are ideal to construct downlink 18.300 to 21.200 Hz and uplink 28.350 to 31.000 Hz transparent fiber optic links for antenna remoting,

More information

Optiva OTS-2 40 GHz Amplified Microwave Band Fiber Optic Links

Optiva OTS-2 40 GHz Amplified Microwave Band Fiber Optic Links 5 MHz to 4 GHz Amplified Microwave Transport System The Optiva OTS-2 4 GHz Microwave Band transmitter and receiver are ideal to construct transparent fiber optic links in the 5 MHz to 4 GHz frequency range

More information

Optiva OTS-2 40 GHz Amplified Microwave Band Fiber Optic Links

Optiva OTS-2 40 GHz Amplified Microwave Band Fiber Optic Links 2 GHz to 4 GHz Amplified Microwave Transport System The Optiva OTS-2 4 GHz Microwave Band transmitter and receiver are ideal to construct transparent fiber optic links in the 5 MHz to 4 GHz frequency range

More information

Optiva OTS-2 18 GHz Amplified Microwave Band Fiber Optic Links

Optiva OTS-2 18 GHz Amplified Microwave Band Fiber Optic Links MHz to 18 GHz Amplified Microwave Transport System The Optiva OTS-2 18 GHz Microwave Band transmitter and receiver are ideal to construct transparent fiber optic links in the MHz to 18 GHz frequency range

More information

Optiva 18 GHz Unamplified Microwave (MW) Transport System

Optiva 18 GHz Unamplified Microwave (MW) Transport System The EMCORE Optiva Microwave Fiber Optic Transport System is a family of SNMP managed fiber optic transmitter and receivers that provide high-performance 0.05-18 Hz transport within the Optiva modular platform.

More information

Optiva Un-Amplified MW Transport 40 GHz System

Optiva Un-Amplified MW Transport 40 GHz System The EMCORE Optiva Microwave Fiber Optic Transport System is a family of SNMP managed fiber optic transmitter and receivers that provide high-performance 0.05-40 Hz transport within the Optiva modular platform.

More information

SITU3018/ GHz Externally- Modulated Unamplified Transmitter

SITU3018/ GHz Externally- Modulated Unamplified Transmitter SITU3018/3118.0118 GHz Externally The EMCORE SITU3018/3118 (Small Integrated Transmitter Unit) is a highperformance externallymodulated transmitter for applications from 10 MHz to 18 GHz. The SITU family

More information

SITU3022/ GHz Externally- Modulated Unamplified Transmitter

SITU3022/ GHz Externally- Modulated Unamplified Transmitter The EMCORE SITU3022/32 (Small Integrated Transmitter Unit) is a highperformance externallymodulated transmitter for applications from 50 MHz to 22 GHz. The SITU family is a fullyintegrated unit that contains

More information

5100 Series L-Band Fiber Optic Links

5100 Series L-Band Fiber Optic Links LBand Fiber Optic Links The 5100Series fiber optic interfacility links (IFLs) are a high performance, costeffective alternative to coaxial cable for 950 MHz to 2050 MHz LBand satellite communications applications.

More information

5200 Series 3 GHz Fiber Optic Links

5200 Series 3 GHz Fiber Optic Links The 5200 Series 3 GHz Fiber Optic InterFacility Link (IFL) is a highperformance, costeffective alternative to coaxial cable for 20 MHz to 3000 MHz communications applications. EMCORE s fiber optic IFLs

More information

nm C-Band DWDM DFB Laser Module

nm C-Band DWDM DFB Laser Module The 1764 laser module is a Dense Wavelength Division Multiplexing (DWDM) laser for analog wireless and distributed antenna system (DAS) applications. It features a distributed-feedback (DFB) device that

More information

Model 1772 DWDM High Power CW Source Laser

Model 1772 DWDM High Power CW Source Laser Model 1772 DWDM High Power CW Source Laser Applications DWDM The 1772 laser component is characterized for use as a CW optical source in CATV and DWDM networks. The 1772 is dccoupled with a builtin TEC,

More information

1754C C-Band DWDM DFB Laser Module

1754C C-Band DWDM DFB Laser Module The 1754C laser module is a Dense Wavelength Division Multiplexing (DWDM) laser for analog CATV applications. It features a distributedfeedback (DFB) device that has been designed specifically for radio

More information

1751A 1550 nm DWDM DFB Laser Module

1751A 1550 nm DWDM DFB Laser Module 1751A 1550 nm DWDM DFB Laser Module Applications Node capability Narrow transmitter housing Networks with limited fiber Architectures using separate optical wavelengths to carry targeted services Features

More information

1752A 1550 nm DOCSIS 3.1 DWDM DFB Laser Module

1752A 1550 nm DOCSIS 3.1 DWDM DFB Laser Module Applications Node Capability Narrow Transmitter Housing Networks with Limited Fiber Architectures Using Separate Optical Wavelengths to Carry Targeted Services Features DOCSIS 3.1 compliant 1.2 GHz Bandwidth

More information

Model 1955F/R/W Coaxial DFB Laser Diode

Model 1955F/R/W Coaxial DFB Laser Diode Model 1955F/R/W Coaxial 1550nm CWDM, 5 MHz 4000 MHz Emcore s Model 1955 DFB lasers offer a low cost solution for linear fiberoptic links. These components can be cooled with external thermoelectric coolers

More information

1616A 1310 nm DOCSIS 3.1 DFB Laser Module

1616A 1310 nm DOCSIS 3.1 DFB Laser Module The 1616A 1310 nm DOCSIS 3.1 DFB laser module is designed for both broadcast and narrowcast analog applications. The 1616A laser module is compliant with the new DOCSIS 3.1 standard, supporting operational

More information

Small Integrated Transmitter Unit SITU2400-XZ

Small Integrated Transmitter Unit SITU2400-XZ Small Integrated Transmitter Unit SITU2400-XZ 0.05 1 GHz, ITU-Grid DWDM Directly Modulated Self-Contained Transmitter Applications Cellular and PCS Antenna- Remoting Microwave Delay Lines Frequency Distribution

More information

1751A 1550 nm DWDM DFB Laser Module

1751A 1550 nm DWDM DFB Laser Module CATV Applications Node Capability Narrow Transmitter Housing Networks with Limited Fiber Architectures Using Separate Optical Wavelengths to Carry Targeted Services Features Standard ITU Grid Wavelengths

More information

1612A/B 1310 nm DFB Laser Module

1612A/B 1310 nm DFB Laser Module The 1612A/B 1310 nm forward path DFB laser modules are designed for both broadcast and narrowcast analog applications. The highly linear OC48 pinout compatible devices feature options up to 31mW of minimum

More information

Fiber Optic Transport Solutions for Satellite & Microwave Communications

Fiber Optic Transport Solutions for Satellite & Microwave Communications Fiber Optic Transport Solutions for Satellite & Microwave Communications Commercial, Government, Aerospace and Defense BASEBAND, IF, L, S, C, X, DBS, Ku, K, Ka, and Ultra-Wideband Signal Transport EMCORE

More information

Model 1782 DWDM High Power CW Source Laser

Model 1782 DWDM High Power CW Source Laser Model 1782 DWDM High Power CW Source Laser Applications DWDM CATV The 1782 laser component is characterized for use as a CW optical source in CATV and DWDM networks. The 1782 is dccoupled with a builtin

More information

1933 F/R/W Coaxial DFB Laser Diode

1933 F/R/W Coaxial DFB Laser Diode EMCORE s Model 1933 DFB lasers offer a low cost solution for linear fiber optic links. These components can be cooled with external thermoelectric coolers for high stability, or run without TEC s to reduce

More information

1751A 1550 nm DWDM DFB Laser Module

1751A 1550 nm DWDM DFB Laser Module 1751A 1550 nm DWDM DFB Laser Module Applications Node capability Narrow transmitter housing Networks with limited fiber Architectures using separate optical wavelengths to carry targeted services Features

More information

1935 F/R/W Coaxial DFB Laser Diode

1935 F/R/W Coaxial DFB Laser Diode OBand CWDM 5 MHz 4000 MHz EMCORE s Model 1935 DFB lasers offer a lowcost solution for linear fiber optic links. These components can be cooled with external thermoelectric coolers for high stability, or

More information

1782 DWDM High Power CW Source Laser

1782 DWDM High Power CW Source Laser The 1782 laser component is characterized for use as a CW optical source in CATV and DWDM networks. The 1782 is dccoupled with a builtin TEC, thermistor, and monitor photodiode. The device is mounted in

More information

Narrow Linewidth Micro- Integrable Tunable Laser Assembly u ITLA

Narrow Linewidth Micro- Integrable Tunable Laser Assembly u ITLA Narrow Linewidth Micro- Integrable Tunable Laser Assembly 6205-u ITLA www.lumentum.com Data Sheet Lumentum narrow linewidth tunable lasers are a key component in today s agile transmission modules that

More information

1622A/B CWDM DFB Laser Module

1622A/B CWDM DFB Laser Module The 1622A/B ITU G.695 compliant CWDM forward path DFB laser components are designed for both broadcast and narrowcast analog applications. The highly linear, OC48 pinout compatible components feature options

More information

1782 DWDM High Power CW Source Laser

1782 DWDM High Power CW Source Laser EMCORE s 1782 laser module is characterized for use as a CW optical source in CATV and DWDM networks. The 1782 is dccoupled with a builtin TEC, thermistor, and monitor photodiode. The device is mounted

More information

ULTRA BROADBAND RF over FIBER Transceiver OZ1606 Series Premium Grade 6 GHz

ULTRA BROADBAND RF over FIBER Transceiver OZ1606 Series Premium Grade 6 GHz FEATURES 30 MHz 6.0 GHz Bandwidth Rugged Dust tight Cast Metal housing, 3 x 5 x 1.25 @ ¾ lb 20 C to +65 C T OP Range LD Bias, LD Power and PD Monitoring and Alarms High SFDR Typically 113 (db/hz) 2/3 at

More information

1955 F/R/W Coaxial DFB Laser Diode

1955 F/R/W Coaxial DFB Laser Diode EMCORE s Model 1955 DFB lasers offer a low cost solution for linear fiber optic links. These components can be cooled with external thermoelectric coolers for high stability, or run without TEC s to reduce

More information

Optiva RF-Over-Fiber Design Tool User s Guide. Revision 1.0 March 27, 2015

Optiva RF-Over-Fiber Design Tool User s Guide. Revision 1.0 March 27, 2015 Optiva RF-Over-Fiber Design Tool User s Guide Revision 1.0 March 27, 2015 2015 Jenco Technologies Inc. All rights reserved. Every attempt has been made to make this material complete, accurate, and up-to-date.

More information

SatellitePlus Model OLMT. Mini L-Band Transmitter. 10-3,600 MHz OPERATING MANUAL

SatellitePlus Model OLMT. Mini L-Band Transmitter. 10-3,600 MHz OPERATING MANUAL SatellitePlus Model OLMT Mini L-Band Transmitter 10-3,600 MHz OPERATING MANUAL 24926 Highway 108 Mi-Wuk Village, CA 95346 Phone: (800) 545-1022 Fax: (209 586-1022 025-000567 Rev. X1 E-Mail: sales@olsontech.com

More information

7820C CATV Optical Receiver 200 MHz HFC Return Path

7820C CATV Optical Receiver 200 MHz HFC Return Path The 7820C optical receiver is a single-mode fiber pigtailed module featuring a low-noise, impedance-matched broadband photodiode and RF amplification. The device receives optical analog and/or digital

More information

SatellitePlus Model OLMR. Mini L-Band Receiver. 10-3,600 MHz OPERATING MANUAL

SatellitePlus Model OLMR. Mini L-Band Receiver. 10-3,600 MHz OPERATING MANUAL SatellitePlus Model OLMR Mini L-Band Receiver 10-3,600 MHz OPERATING MANUAL 24926 Highway 108 Mi-Wuk Village, CA 95346 Phone: (800) 545-1022 Fax: (209 586-1022 025-000565 Rev. X9 E-Mail: sales@olsontech.com

More information

RF over Fiber Optic Transceiver OZ816 Series Ultra Broadband 6 GHz

RF over Fiber Optic Transceiver OZ816 Series Ultra Broadband 6 GHz FEATURES 30 MHz to 6.0 GHz Bandwidth Approx Size: 3 x 5 x 1.25 in. Weight ¾ pound 40 C to +5 C Operating Temperature LD/PD Monitoring & Alarm High Spurious Free Dynamic Range Automatic Optical Power Control

More information

7820R Optical Receiver MHz RFoG Return Path

7820R Optical Receiver MHz RFoG Return Path The 7820R RFoG return path optical receiver is a single-mode fiber pigtailed module featuring a low-noise, impedance-matched broadband photodiode and RF amplification. The device receives optical analog

More information

70/140 MHz IF Fiber Optic Link

70/140 MHz IF Fiber Optic Link 70/140 MHz IF Fiber Optic Link Product Description Features & Benefits IF-Band: 10 200 MHz Up to 10Km distance Powerful management capabilities via a front panel LCD and rack mounted SNMP 1550nm and CWDM

More information

35XA-Series Fiber-Optic Delay Line

35XA-Series Fiber-Optic Delay Line DATASHEET JANUARY 28, 2004 35XA-Series Fiber-Optic Delay Line The 35XA-Series fiber-optic delay line delivers unmatched performance for radar testing, signal processing, phased antenna array, and phase

More information

SFP-10G-M 10G Ethernet SFP+ Transceiver

SFP-10G-M 10G Ethernet SFP+ Transceiver SFP+, LC Connector, 850nm VCSEL with PIN Receiver, Multi Mode, 300M Features Applications High-speed storage area networks Computer cluster cross-connect Custom high-speed data pipes 10GE Storage, 8G Fiber

More information

2651A/2651E Broadband Photodiode

2651A/2651E Broadband Photodiode The 2651 provides the proven high performance of EMCORE s photodiode technology in a very practical, costeffective package. The 2651A features high linearity and low capacitance over a 1 GHz bandwidth.

More information

High-Fidelity RF over Fiber Links

High-Fidelity RF over Fiber Links High-Fidelity RF over Fiber Links 8 Uplander Way, Suite 2 Culver City, CA 923 Rugged, Small Form Factor Transmitter and Receiver Modules for RF over Optical Fiber Links Applications Fiber to the Antenna:

More information

INSTRUCTION MANUAL OTOT-1000C-FQ WIDE-BAND 1550NM DIRECT-MOD QAM TRANSMITTER. 1,000 MHz Bandwidth / Optical Output Power is +9dBm (OTOT-1000C-09-FQ)

INSTRUCTION MANUAL OTOT-1000C-FQ WIDE-BAND 1550NM DIRECT-MOD QAM TRANSMITTER. 1,000 MHz Bandwidth / Optical Output Power is +9dBm (OTOT-1000C-09-FQ) INSTRUCTION MANUAL OTOT-1000C-FQ WIDE-BAND 1550NM DIRECT-MOD QAM TRANSMITTER 1,000 MHz Bandwidth / Optical Output Power is +9dBm (OTOT-1000C-09-FQ) Phone: (209) 586-1022 (800) 545-1022 Fax: (209) 586-1026

More information

PR-12-B-M. 12 GHz PhotoReceiver, Module. Features. Applications. Functional Diagram

PR-12-B-M. 12 GHz PhotoReceiver, Module. Features. Applications. Functional Diagram PR-12-B-M 12 GHz PhotoReceiver, Module The Optilab PR-12-B-M is a 12 GHz bandwidth amplified PIN photodiode receiver module, designed for RF over fiber, antenna remoting, and broadband RF signals transmission

More information

Description. Applications CATV forward-path. DFB-1310-P2-xx-A3-xx Predistorted Laser Transmitter REV 007

Description. Applications CATV forward-path. DFB-1310-P2-xx-A3-xx Predistorted Laser Transmitter REV 007 Description The DFB-1310-P2-xx-A3-xx laser transmitter is designed for high-performance forward-path analog transmission, especially in CATV Hybrid Fiber-Coax (HFC) networks. The transmitter module combines

More information

HDO772 C-BAND DWDM FIBRE TRANSMITTER

HDO772 C-BAND DWDM FIBRE TRANSMITTER Timo Rantanen 19.9.2012 1(6) HDO772 C-BAND DWDM FIBRE TRANSMITTER HDO772 is a high performance directly modulated C-band DWDM transmitter for forward path fibre optic links in CATV and FTTx networks. HDO772

More information

Long-Haul DWDM RF Fiber Optic Link System

Long-Haul DWDM RF Fiber Optic Link System EMCORE Corporation - Broadband Division, Alhambra, CA, USA ABSTRACT EMCORE s vertically integrated ISO-9001 facility, staffed with our optics/rf engineering team, has been successfully designing and manufacturing

More information

HDO907 CATV FIBRE TRANSMITTER

HDO907 CATV FIBRE TRANSMITTER Timo Rantanen 18.2.2015 1(6) HDO907 CATV FIBRE TRANSMITTER HDO907 is a high performance, linear and directly modulated DFB laser transmitter for forward path fibre optic links in CATV and FTTx networks.

More information

Description. Applications CATV return path CWDM narrowcast and point-to-point applications. DFB-1XXX-BF-xx-A1-xx Laser Module REV 016

Description. Applications CATV return path CWDM narrowcast and point-to-point applications. DFB-1XXX-BF-xx-A1-xx Laser Module REV 016 Description The DFB-1XXX-BF-xx-A1-xx DFB laser modules are designed for return-path CATV applications. The modules are designed to incorporate high output power while maintaining high linearity. The devices

More information

Model R198A 10 Gb/s Surface-Mount APD-TIA Receiver

Model R198A 10 Gb/s Surface-Mount APD-TIA Receiver Model R198A 10 Gb/s SurfaceMount APDTIA Receiver Applications WDM applications SONET and 10 Gb/s Ethernet 1527 transponders Very dense line cards Features R198A 10 Gb/s APD Rx +3.3 V TIA supply 27 dbm

More information

DVO902 E/S CATV FIBRE TRANSMITTER

DVO902 E/S CATV FIBRE TRANSMITTER Timo Rantanen 24.7.2007 1(5) DVO902 E/S CATV FIBRE TRANSMITTER DVO902 E and S types are high performance, extremely linear DFB laser transmitters for DVO fibre optic CATV link. DVO902 is available on different

More information

HFC. Enhance. QFHPN High Power Optical Node with AGC Installation & Operation Guide

HFC. Enhance. QFHPN High Power Optical Node with AGC Installation & Operation Guide HFC Enhance QFHPN High Power Optical Node with AGC Installation & Operation Guide Although every effort has been taken to ensure the accuracy of this document it may be necessary, without notice, to make

More information

HDO905 CATV FIBRE TRANSMITTER

HDO905 CATV FIBRE TRANSMITTER Timo Rantanen 23.8.2011 1(6) HDO905 CATV FIBRE TRANSMITTER HDO905 is a high performance, linear directly modulated DFB laser transmitter for forward path fibre optic links in CATV and FTTx networks. The

More information

Artisan Scientific is You~ Source for: Quality New and Certified-Used/Pre:-awned ECJuiflment

Artisan Scientific is You~ Source for: Quality New and Certified-Used/Pre:-awned ECJuiflment Looking for more information? Visit us on the web at http://www.artisan-scientific.com for more information: Price Quotations Drivers Technical Specifications. Manuals and Documentation Artisan Scientific

More information

Delivering Modulation Solutions

Delivering Modulation Solutions Delivering Modulation Solutions 1 nm band Analog Intensity The are high bandwidth intensity modulators specially designed for the transmission of analog signals over optical fibers. The MXAN-LN s performance

More information

Parameter Symbol Condition Min Typ Max Unit. Data Input Specifications. SI Input Specifications. Parameter Symbol Condition Min Typ Max Unit

Parameter Symbol Condition Min Typ Max Unit. Data Input Specifications. SI Input Specifications. Parameter Symbol Condition Min Typ Max Unit light.augmented The -OBand-28Gb/s-NRZ-SE provides production and R&D engineers a solution for Stress Receiver Sensitivity test & measurements in the O-Band. This Reference Transmitter delivers high-quality

More information

Description. Applications CATV Return-path Analog transmission. DFB-1xxx-C5-2-A-xx-x-x-xx REV 014 APPLIED OPTOELECTRONICS, INC.

Description. Applications CATV Return-path Analog transmission. DFB-1xxx-C5-2-A-xx-x-x-xx REV 014 APPLIED OPTOELECTRONICS, INC. Description Features Advanced Multiple Quantum Well (MQW) Distributed Feedback (DFB) Laser Design Low Distortion o IMD2 50 dbc o IMD3 55 dbc RIN < -145 db/hz Cost-effective Uncooled Laser Technology SMSR

More information

AC800 FIBRE OPTIC NODE

AC800 FIBRE OPTIC NODE Broadband Cable Networks / Kari Mäki January 11, 2007 1(6) AC800 FIBRE OPTIC NODE The AC800 is a single active output node. It is based on fixed receiver concept but new features can be added by flexible

More information

ModBox-CBand-DPSK series C-Band, 12 Gb/s Reference Transmitters

ModBox-CBand-DPSK series C-Band, 12 Gb/s Reference Transmitters -CBand-DPSK series C-Band, 12 Gb/s Reference Transmitters The -CBand-DPSK is an optical modulation unit that generates high performance DPSK optical data streams up to 12.5 Gb/s. The equipment incorporates

More information

ModBox 1550 nm 44 Gb/s NRZ C, L bands ; 100 Mb/s - 44 Gb/s Reference Transmitter

ModBox 1550 nm 44 Gb/s NRZ C, L bands ; 100 Mb/s - 44 Gb/s Reference Transmitter Delivering Modulation Solutions The -1550nm-44Gbps-NRZ is an optical modulation unit that generates high performance NRZ optical data streams. The equipment incorporates a modulation stage based on a high

More information

AFBR-59F2Z Data Sheet Description Features Applications Transmitter Receiver Package

AFBR-59F2Z Data Sheet Description Features Applications Transmitter Receiver Package AFBR-59F2Z 2MBd Compact 6nm Transceiver for Data communication over Polymer Optical Fiber (POF) cables with a bare fiber locking system Data Sheet Description The Avago Technologies AFBR-59F2Z transceiver

More information

Data Sheet. AFBR-1310Z / AFBR-1310xZ Fiber Optic Transmitter for Multi GHz Analog Links. Description. Features. Specifications.

Data Sheet. AFBR-1310Z / AFBR-1310xZ Fiber Optic Transmitter for Multi GHz Analog Links. Description. Features. Specifications. AFBR-1310Z / AFBR-1310xZ Fiber Optic Transmitter for Multi GHz Analog Links Data Sheet Description The AFBR-1310xZ is a compact, high performance, cost effective transmitter for multi GHz analog communication

More information

Description. Features Advanced Multiple Quantum Well (MQW) Fabry-Perot Laser Design Cost-effective Uncooled Laser Technology 5.6-mm TO-style package

Description. Features Advanced Multiple Quantum Well (MQW) Fabry-Perot Laser Design Cost-effective Uncooled Laser Technology 5.6-mm TO-style package Description The series of Multi-Quantum Well (MQW) Fabry-Perot (FP) lasers are well suited for low-cost high-speed transmitters. The devices feature high output power and wide operating temperature range.

More information

10Gb/s SFP+ BX LC DDMI Optical module Tx:1330nm/Rx:1270nm 10km transmission distance

10Gb/s SFP+ BX LC DDMI Optical module Tx:1330nm/Rx:1270nm 10km transmission distance Feature 10Gb/s serial optical interface compliant to 802.3ae 10GBASE-LR, single LC connector for bi-directional application, over 10km SMF Electrical interface compliant to SFF-8431 specifications for

More information

ModBox Pulse 100 ps - ms Optical Pulse Transmitter

ModBox Pulse 100 ps - ms Optical Pulse Transmitter Delivering Modulation Solutions Cybel, LLC. North American Distributor Pulse The -Pulse is an optical modulation unit that generates high performance optical pulses. The equipment incorporates a modulation

More information

Product Specification

Product Specification PRODUCT FEATURES Product Specification CW Tunable Laser Butterfly Package S7500 Full C-band tuning (89 channels at 50 GHz spacing) High, flexibly adjustable output power, from 9 to 13 dbm Low power dissipation,

More information

Gb/s 1310 nm DML DFB Laser

Gb/s 1310 nm DML DFB Laser 1861 Gb/s 13 nm DML DFB Laser The 1861 directly-modulated laser (DML) is a cost-effective solution for Gb/s digital transmission of up to 60 km using traditional intra-city SMF-28 single-mode fiber links.

More information

ModBox-CBand-NRZ series C-Band, 28 Gb/s, 44 Gb/s, 50 Gb/s Reference Transmitters

ModBox-CBand-NRZ series C-Band, 28 Gb/s, 44 Gb/s, 50 Gb/s Reference Transmitters The is a family of Reference Transmitters that generate excellent quality NRZ optical data streams up to 28 Gb/s, 44 Gb/s, 50 Gb/s in the C-band. These transmitters produce very clean eye diagrams with

More information

AC500 AMPLIFIER PLATFORM

AC500 AMPLIFIER PLATFORM Broadband Cable Networks / Kari Mäki March 18, 2004 1(6) AC500 AMPLIFIER PLATFORM The AC500 is a single active output amplifier with 39 of gain. The amplifier can be used as in distribution purposes in

More information

ModBox-1310nm-1550nm-NRZ 1310nm & 1550 nm, 28 Gb/s, 44 Gb/s Reference Transmitters

ModBox-1310nm-1550nm-NRZ 1310nm & 1550 nm, 28 Gb/s, 44 Gb/s Reference Transmitters light.augmented ModBox-1310nm-1550nm-NRZ The -1310nm-1550nm-NRZ series is a family of Reference Transmitters that generate at 1310 nm and 1550 nm excellent quality NRZ optical data streams up to 28 Gb/s,

More information

DL47B3A 2.5 Gbps 1550 nm Direct Modulation DFB Laser Module

DL47B3A 2.5 Gbps 1550 nm Direct Modulation DFB Laser Module 1 Technical Data Sheet August 2001 OPTOELECTRONICS DIVISION DL47B3A 2.5 Gbps 1550 nm Direct Modulation DFB Laser Module Features High-performance MQW DFB Laser Built-in TEC, Thermistor and Monitor PD 25Ω

More information

Description. Applications 1.25 Gbps upstream and 2.5 Gbps analog downstream reception DFB-1310-DP-XX-5P-AAF-SA-X-X REV 003

Description. Applications 1.25 Gbps upstream and 2.5 Gbps analog downstream reception DFB-1310-DP-XX-5P-AAF-SA-X-X REV 003 Description The DFB-1310-DP-XX-5P-AAF-SA-X-X-183 series of Bi-Directional modules have been designed specifically for full-duplex communication over a single fiber. The devices are particularly suited

More information

CXE880 FIBRE OPTIC NODE

CXE880 FIBRE OPTIC NODE Kari Mäki 21.4.2011 1(6) CXE880 FIBRE OPTIC NODE The CXE880 is a fibre deep optical node. It is designed for cases where high performance and cost effectiveness are a demand. Requirements of future networks,

More information

ModBox-CBand-28Gb/s-DPSK C-Band, 28 Gb/s DPSK Reference Transmitter

ModBox-CBand-28Gb/s-DPSK C-Band, 28 Gb/s DPSK Reference Transmitter -CBand-28Gb/s-DPSK FEATURES Full C-Band Reference Transmitter Up to 28 Gb/s Reliable & reproducible measurements High eye diagram stability APPLICATIONS Transmission system test Components characterization

More information

Headend Optics Platform (CH3000)

Headend Optics Platform (CH3000) arris.com Headend Optics Platform (CH3000) HT3580H Series Quad-Density Full Spectrum DWDM Transmitter System FEATURES DWDM transmitter: up to 16 wavelengths on ITU grid Hot plug-in/out, individually replaceable

More information

Mission Critical DAS Solution

Mission Critical DAS Solution Mission Critical DAS Solution In-Building Cellular Satellite Phone Coverage Mission Critical DAS solution for In-Building Systems provides a simple, low-cost, limitless bandwidth method to distribute multi-channel,

More information

Data Sheet. Description. Features. Transmitter. Applications. Receiver. Package

Data Sheet. Description. Features. Transmitter. Applications. Receiver. Package AFBR-59F1Z 125MBd Compact 650 nm Transceiver for Data Communication over Polymer Optical Fiber (POF) cables with a bare fiber locking system Data Sheet Description The Avago Technologies AFBR-59F1Z transceiver

More information

CXE880 FIBRE OPTIC NODE

CXE880 FIBRE OPTIC NODE Kari Mäki 4.3.2008 1(6) CXE880 FIBRE OPTIC NODE The CXE880 is a fibre deep optical node. It is designed for cases where high performance and cost effectiveness are a demand. Requirements of future networks,

More information

Installing the Avaya 10-Gigabit

Installing the Avaya 10-Gigabit Installing the Avaya 10-Gigabit CHAPTER 1 Uplink Module Overview This document describes the installation of the Avaya 10-Gigabit Uplink Module (Figure 1). Figure 1. 10-Gigabit Uplink Module This document

More information

Cisco Enhanced Digital Return (EDR) 85 System Compact Segmentable Nodes

Cisco Enhanced Digital Return (EDR) 85 System Compact Segmentable Nodes Cisco Enhanced Digital Return (EDR) 85 System Compact Segmentable Nodes The Cisco Enhanced Digital Return (EDR) 85 System expands the functionality of Compact Segmentable Nodes by increasing the performance,

More information

AC1000 AMPLIFIER & OPTICAL NODE PLATFORM

AC1000 AMPLIFIER & OPTICAL NODE PLATFORM Broadband Cable Networks / Kari Mäki February 6, 2008 1(11) AC1000 AMPLIFIER & OPTICAL NODE PLATFORM The AC1000 is a single active output amplifier with 29 or 39 of platforms. Both platforms can be used

More information

ModBox 850 nm 28 Gb/s NRZ 800 band ; 100 Mb/s - 28 Gb/s Reference Transmitter

ModBox 850 nm 28 Gb/s NRZ 800 band ; 100 Mb/s - 28 Gb/s Reference Transmitter Delivering Modulation Solutions 850 nm 28 Gb/s NRZ The -850nm-28Gbps-NRZ is an optical modulation unit that generates high performance NRZ optical data streams at 850 nm. The equipment incorporates a modulation

More information

25-Gbit/s, 850-nm VCSEL

25-Gbit/s, 850-nm VCSEL USER S GUIDE 25-Gbit/s, 850-nm VCSEL Model 1784 Caution Use of controls or adjustments or performance procedures other than those specified herein may result in hazardous radiation exposure Caution The

More information

10Gb/s SFP+ Optical Transceiver Module 10GBASE-SR/SW

10Gb/s SFP+ Optical Transceiver Module 10GBASE-SR/SW 10Gb/s SFP+ Optical Transceiver Module 10GBASE-SR/SW Features 10Gb/s serial optical interface compliant to 802.3ae 10GBASE SR Electrical interface compliant to SFF 8431 specifications for enhanced 8.5

More information

830nm single mode diode laser

830nm single mode diode laser Preliminary Data Sheet 830nm single mode diode laser SM830-350-TO56-R0x Features: High output power: 350 mw High Efficiency: 1 W/A Lateral Single Mode Wavelength: 824 ± 6nm High Reliability Applications:

More information

D1861A 10 Gbits/s 1310 nm DML Module

D1861A 10 Gbits/s 1310 nm DML Module D1861A 10 Gbits/s 1310 nm DML Module Description The D1861A direct-modulated laser (DML) module is a cost-effective solution for 10 Gbits/s digital transmission up to 50 km using traditional intracity

More information

Uncooled DFB-LD Coaxial Module with Single-mode fiber for Analog Communication Customized Specifications

Uncooled DFB-LD Coaxial Module with Single-mode fiber for Analog Communication Customized Specifications Uncooled DFB-LD Coaxial Module with Single-mode fiber for Analog Communication Customized Specifications Part Number : HLS4 21-SUC 1310/1470/1490/1510/1530/1550/1570/1590/1610 nm OPTICAL SUB-ASSEMBLY FAB.

More information

INSTALLATION and OPERATION INSTRUCTIONS. FOR FiberLink BI-DIRECTIONAL AMPLIFIER WITH DIVERSITY MW-FBDA-800AB-50W-DIV

INSTALLATION and OPERATION INSTRUCTIONS. FOR FiberLink BI-DIRECTIONAL AMPLIFIER WITH DIVERSITY MW-FBDA-800AB-50W-DIV INSTALLATION and OPERATION INSTRUCTIONS FOR FiberLink BI-DIRECTIONAL AMPLIFIER WITH DIVERSITY MW-FBDA-800AB-50W-DIV Page 1 of 15 TABLE OF CONTENTS PARA No. PARAGRAPH PAGE No. 1. OVERVIEW 3 2. COMPONENT

More information

4235/4245 Tunable Laser Transmitter

4235/4245 Tunable Laser Transmitter AGILE TRANSMISSION MODULES 4235/4245 Tunable Laser Transmitter Key Features Up to 2.5 Gb/s data rate 35 nm operating range (1528-1563 nm) 90 ITU channels at 50 GHz spacing Blanking to -30 dbm during switching

More information

FIBER OPTIC ANTENNA LINK OFW-5800/GPS. Compatible with a Wide Range of GPS Receivers Architectures. Logistically Supported with COTS Hardware

FIBER OPTIC ANTENNA LINK OFW-5800/GPS. Compatible with a Wide Range of GPS Receivers Architectures. Logistically Supported with COTS Hardware FIBER OPTIC ANTENNA LINK OFW-5800/GPS Compatible with a Wide Range of GPS Receivers Architectures Designed to Operate within the Naval Electromagnetic Environment Designed and Manufactured to Meet Naval

More information

ModBox 1550 nm 12 Gb/s DPSK C, L bands ; 12 Gb/s Reference Transmitter & Receiver

ModBox 1550 nm 12 Gb/s DPSK C, L bands ; 12 Gb/s Reference Transmitter & Receiver Delivering Modulation Solutions The -1550nm-12Gbps-DPSK is an optical modulation unit that generates high performance DPSK optical data streams. The equipment incorporates a modulation stage based on a

More information

INGAAS FAST PIN (RF) AMPLIFIED PHOTODETECTORS

INGAAS FAST PIN (RF) AMPLIFIED PHOTODETECTORS INGAAS FAST PIN (RF) AMPLIFIED PHOTODETECTORS High Signal-to-Noise Ratio Ultrafast up to 9.5 GHz Free-Space or Fiber-Coupled InGaAs Photodetectors Wavelength Range from 750-1650 nm FPD310 FPD510-F https://www.thorlabs.com/newgrouppage9_pf.cfm?guide=10&category_id=77&objectgroup_id=6687

More information

MXER-LN series 1550 nm band Very High Extinction Ratio Intensity Modulators

MXER-LN series 1550 nm band Very High Extinction Ratio Intensity Modulators Fiber The of intensity modulators is a family of high performance modulators exhibiting superior Extinction Ratio. Their specific design relies on ixblue Magic Junction (patent n US2819377). intensity

More information

End of Life. Headend Optics Platform (HLP) SPL7210S/A. HL2 Series SUPRALink High Density DWDM Transmitter FEATURES PRODUCT OVERVIEW. arris.

End of Life. Headend Optics Platform (HLP) SPL7210S/A. HL2 Series SUPRALink High Density DWDM Transmitter FEATURES PRODUCT OVERVIEW. arris. arris.com Headend Optics Platform (HLP) SPL7210S/A HL2 Series SUPRALink High Density DWDM Transmitter FEATURES Compact size enables 20 DFB modules to fit in a 3RU platform DWDM technology optimizes HFC

More information

Artisan Scientific is You~ Source for: Quality New and Certified-Used/Pre:-awned ECJuiflment

Artisan Scientific is You~ Source for: Quality New and Certified-Used/Pre:-awned ECJuiflment Looking for more information? Visit us on the web at http://www.artisan-scientific.com for more information: Price Quotations Drivers Technical Specifications. Manuals and Documentation Artisan Scientific

More information

NIR-MX-LN series 1000 nm band Intensity Modulator

NIR-MX-LN series 1000 nm band Intensity Modulator 1 nm band Intensity The NIR-MX-LN series are an intensity modulator especially designed for operation in the 1 nm wavelength band. This Mach-Zehnder modulator offers engineers working in the 1 nm the intrinsic

More information

MobileAccess1000. features and benefits. A Corning MobileAccess Solutions Product

MobileAccess1000. features and benefits. A Corning MobileAccess Solutions Product 1000 features and benefits Multi-service platform Modular design Carrier-class operation Robust management Accommodates up to four wireless voice and data services including WLAN, eliminating the need

More information

Q-SERIES. Optical. QFQR 200A-04 Series Return Path Optical Receiver. Installation & Operation Manual

Q-SERIES. Optical. QFQR 200A-04 Series Return Path Optical Receiver. Installation & Operation Manual Q-SERIES Optical QFQR 200A-04 Series Return Path Optical Receiver Installation & Operation Manual Although every effort has been taken to ensure the accuracy of this document it may be necessary, without

More information

ModBox-850nm-NRZ-series

ModBox-850nm-NRZ-series Fiber The -850nm-NRZ series is a family of Reference Transmitters that generate excellent quality NRZ optical data streams up to 28 Gb/s, 44 Gb/s, 50 Gb/s at 850 nm. These transmitters produce very clean

More information

SFF-3Gx-TX2 Rugged Gb/s Dual Channel SFF Transmitter Dual Channel Fiber Transmitter

SFF-3Gx-TX2 Rugged Gb/s Dual Channel SFF Transmitter Dual Channel Fiber Transmitter SFF-3Gx-TX2 Features: Multi-Rate Compliant for FC-PI-2 Fibre Channel, ARINC 818, Infiniband 850nm Oxide VCSEL Lasers Industrial temperature range standard: -40 C to +85 C Extended temperature range optional:

More information