OWNER S MANUAL. 915 MHz Wireless Transmitter

Transcription

1 OWNE S MANUA 915 MHz Wireless Transmitter

2 915 MHz Wireless Transmitter Congratulations! You are now the proud owner of a Wireless BOOMCHAI. Prepare to experience your entertainment on a whole new level. BOOMCHAI allows you to HEA the sound and FEE the excitement. You ll experience every crash, bang, and boom while enjoying your favorite game, music, or movie. BOOMCHAI is also a great game seat built to endure the rigors of today s gaming environment. Take a moment to review your owner s manual before connecting your BOOMCHAI. Assembly and operation of the BOOMCHAI is simple. If you need further assistance visit us at or BOOMCHAI, a umisource product. umisource, Inc Old Higgins oad, Elk Grove Village, I PATENTS PENDING EAD BEFOE USE DO NOT wash or soak with water. If BOOMCHAI gets wet, disconnect power immediately and do not use until completely dry. Turn power off and unplug BOOMCHAI when not in use. Children under 5 years old should not use this product without parental supervision. For INDOO use only/ DO NOT expose to direct sunlight, moisture, or extreme temperatures. DO NOT use on slippery or uneven flooring. Excessive exposure to audio equipment at high volume may lead to hearing loss. DO NOT OPEN Caution: To reduce the risk of electric shock and fire, do not open the BOOMCHAI. There are no user serviceable parts inside. efer to your warranty for service information. FCC part 15.21: Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user s authority to operate the equipment. FCC part : NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC ules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: - eorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. - Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. - Consult the dealer or an experienced radio TV technician for help. FCC WANING This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference. (2) This device must accept any interference received, including interference that may cause undesired operation. FCC ID: U7YBM-SVC Exposure to radio frequency energy: This device and its antenna must not be colocated or operated in conjunction with any other antenna or transmitter. To comply with FCC F exposure requirements, only use supplied antenna.

3 SET-UP GUIDE The BOOMCHAI comes with the following: PATS IST: 1) BOOMCHAI a 3b 2) 12V POWE SUPPY (U isted) 3a) CA TO MINI AUDIO COD (headphone jack to audio left & right channel connectors) 3b) CA COD (audio left & right channel connectors) 3c) CA AUDIO COUPE 4) POWE ECEPTACE 5) HOOK & OOP FASTENE 6) ADJUSTABE ECINE STOPPES 7) ADJUSTABE HEADEST 8) WIEESS TANSMITTE (requires 4 AA batteries, not included) 9) AUDIO COD FO WIEESS TANSMITTE 10) ED (FX) HEADIGHTS 11) SPEAKES 2 3c SYSTEM SPECS: 8 9 Dimensions: 27 in. x 18 in. W x 36 in. H Dimensions: 69 cm. x 46 cm. W x 92 cm. H Weight: 33 lbs. / 15 kgs. 2-3 in. (7.5 cm.) coaxial mid-high 3W 4 Ohms 1-4 in. (10 cm.) 15W 4 Ohms Power rating: 12 V, 1830/mA DASHBOAD CONTO PANE (A) BASS/TEBE CONTO BASS/TEBE VOUME (B) POWE SWITCH / VOUME CONTO (C) ED POWE INDICATO INPUT OUTPUT POWE (D) WIEESS ON/OFF & CHANNE SWITCH (E) HEADPHONE JACK (F) CA AUDIO OUTPUTS (G) CA AUDIO INPUTS

4 ASSEMBY INSTUCTIONS Step 1: ift seatback to the upright position. Step 2: Secure the seat back using attached hook & loop fasteners. Step 3: Insert receptacle (4) into adapter cord (2). Step 4: Plug adapter (2) into outlet. Step 5: Turn Boomchair Wi-FX on by turning Power knob (B) clockwise. STEP 1 Step 6: Insert 4 AA batteries (not included) into wireless transmitter. Turn power switch on. BATTEY POWE SUPPY Step 1: Unscrew battery compartment on bottom of Boomchair Wi-FX. Step 2: Insert 8 D cell batteries (not included). Step 3: Close battery compartment securely with screws. Step 4: Turn Boomchair on by turning Power knob (B) clockwise. STEP CONNECTING TO GAME CONSOES Note: Most game consoles are supplied with a custom connector with yellow video out and CA red/white audio out. DIECT CONNECTION Step 1: Plug yellow composite video cable from game console into video input of TV. (Fig. 1) Step 2: Plug ed/white CA cord from game console into CA INPUT (G) of BoomChair. (Fig. 2) Note: It may be necessary to extend your BoomChair further away from your TV or console. Here s how. (Fig.3) Step 1: Connect Audio Coupler (3c) to ed/white CA cord from game console. Step 2: Connect one end of CA cord (3b) into other end of Audio Coupler (3c). Step 3: Connect other end of CA cord (3b) into CA INPUT (G) of BoomChair. GAME CONSOE TV AUDIO COUPE (3c) BOOMCHAI Fig. 1 Fig. 3 Fig. 2 BASS/TEBE VOUME POWE INPUT OUTPUT IN 3c 3b Cable supplied with game console WIEESS CONNECTION Step 1: Connect Audio Coupler (3c) to ed/white CA cord from game console. Step 2: Connect red/white end of CA cord (3a) into other end of Audio Coupler (3c). (Fig. 4) Fig. 4 3c 3a 8 Step 3: Connect mini audio end of CA cord (3a) into Wireless Transmitter (8). (Fig. 5) Fig. 5 Step 3: Set transmitter and channel switch (D) to matching frequency.

5 CONNECTING TO POTABE AUDIO / VIDEO DEVICES DIECT CONNECTION - Be sure the wireless channel selector is switched to 0 Step 1: Connect the ed/white ends of CA cord (3a) into CA INPUT (G) of BoomChair. BASS/TEBE INPUT OUTPUT VOUME POWE 3a ipod MP3 Player Portable Audio Device PSP Nintendo DS Portable Game Step 2: Plug the single end of the CA cord (3a) into the headphone jack of your device. Step 3: Turn Boomchair on by turning Power knob (B) clockwise. Step 4: Turn portable device on. WIEESS CONNECTION - Be sure the wireless channel selector number on the chair matches the transmitter with corresponding number of dots Step 1: Insert 4 AA batteries (not included) into wireless transmitter. Turn power switch on. 9 ipod MP3 Player Portable Audio Device PSP Nintendo DS Portable Game Step 2: Connect one end of the wireless audio cord (9) into the wireless transmitter. Step 3: Connect the other end of the wireless audio cord (9) into the headphone jack of your device. Step 4: Turn Boomchair on by turning Power knob (B) clockwise. Step 5: Set transmitter and Boomchair channel switch (D) to matching frequency. CONNECTING TO AUDIO / VIDEO DEVICES DIECT CONNECTION - Be sure the wireless channel selector is switched to 0 BASS/TEBE INPUT OUTPUT VOUME POWE 3b AUDIO OUT TV VC DVD Stereo Satellite eceiver Other Devices Step 1: Connect the ed/white ends of CA cord (3b) into CA INPUT (G) of BoomChair. Step 2: Connect the other ends of CA cord (3b) into AUDIO OUTPUT of Audio/Video device. Step 3: Turn Boomchair on by turning Power knob (B) clockwise. Step 4: Turn Audio/Video device on. WIEESS CONNECTION - Be sure the wireless channel selector number on the chair matches the transmitter with corresponding number of dots Step 1: Insert 4 AA batteries (not included) into wireless transmitter. Turn power switch on. 3a AUDIO OUT TV VC DVD Stereo Satellite eceiver Other Devices Step 2: Connect single end of CA cord (3a) into the wireless transmitter. Step 3: Connect other end of CA cord (3a) into AUDIO OUTPUT of Audio/Video device. Step 4: Turn Boomchair on by turning Power knob (B) clockwise. Step 5: Set transmitter and Boomchair channel switch (D) to matching frequency.

6 DAISY CHAINING CHAIS TOGETHE DIECT CONNECTION Step 1: Connect BoomChair to any media device as described on pages 4 or 5. This is the first chair. FIST CHAI: Connected to device SECOND CHAI Step 2: Connect one end of CA cord (3b) into CA OUTPUT (F) of first BoomChair. Step 3: Connect other end of CA cord (3b) into CA INPUT (G) of second BoomChair. Step 4: Turn all Boomchairs on by turning Power knob (B) clockwise. epeat steps 2 and 3 from second chair to connect more BoomChairs. Up to 4 chairs can be connected when not using the wireless feature. BASS/TEBE VOUME 3b BASS/TEBE VOUME POWE POWE INPUT OUTPUT INPUT OUTPUT Media Device WIEESS CONNECTION Up to 8 chairs can be connected using the wireless method. This requires only one transmitter and all chairs switched to wireless mode. Step 1: Connect Boomchair to any device using the wireless methods described on pages 4 or 5. Step 2: Set transmitter and all Boomchair channel switches (D) to matching frequency. Step 3: Turn all Boomchairs on by turning Power knob (B) clockwise. WIEESS CONNECTION TIPS Should interference occur, switch the channel on the wireless transmitter using the top slider bar (Fig. 1). Switch the channel selector on the Boomchair (Fig. 2) to the same channel as the transmitter. The number corresponds to the number of dots on the transmitter. Select 0 for nonwireless connections. Fig. 1 Fig. 2 Make sure all cables are securely connected. Make sure batteries are correctly installed in the transmitter, and that the power is on, as indicated by the red ED (Fig. 3). If you experience static or poor reception from your wireless connection, you may need to select the direct connection method to ensure the best possible sound quality. See page 5. Fig. 3 Power Switch WANING: DO NOT use the adapter for the chair with this transmitter. It will permanently damage the transmitter and void your warranty. Use only 9V - 12V DC, 100 ma ma adapter, or visit to order the proper adapter.

7 TOUBESHOOTING BOOMCHAI Q: Why isn t there sound coming from any of my speakers? A: Ensure your BoomChair is connected as described in the Setup Guide. Check that the power to the unit is on and the volume is turned up. Also, make sure your audio device is not set to MUTE and volume is turned up. If using wireless connection, make sure the transmitter and BoomChair are set to the same frequency. Make sure wireless transmitter has fresh batteries and is turned on. Q: Why isn t there sound coming from one of my speakers? A: Ensure the audio cord to the BoomChair is securely connected as described in the Setup Guide. Make sure that both the left and right channel audio inputs and outputs are securely connected to the BoomChair and audio device. Q: Why don t the ED lights respond when using battery power? A: When using D cell batteries to power your BoomChair, the ED lights will not be as responsive as when using AC power. This is to conserve the life of your batteries. The ED lights will respond better if the volume of the input device (MP3 player, video game, etc.) is set to maximum volume. Q: Where can I get more information? A: Visit us at or Contact information: umisource, Inc Old Higgins oad, Elk Grove Village, I customerservice@lumisource.com MAINTENANCE AND EPAI If a problem occurs while using this product, please contact us. DO NOT open unit or attempt to repair on your own. It may result in serious injury from electric shock and void your product warranty. CEANING/CAE INSTUCTIONS Fabric: Use a clean cloth to dab lightly with soap and water. DO NOT rub. DO NOT immerse in water. DO NOT use detergent. NOTE: PEASE DO NOT USE ON HADWOOD FOOS, IT MAY CAUSE SCATCHING.

8 UMISOUCE, INC. IMITED WAANTY IMITED WAANTY: umisource, Inc. ( umisource ) warrants this product against defects in materials and workmanship for a period of ninety (90) days from the date of original consumer purchase. If a covered warranty claim is timely made, umisource will, at its sole discretion: (a) repair the product, using new and/or refurbished replacement parts or (b) replace the product with an identical (or comparable) product, without charge to you other than the initial shipping cost to return the product. umisource will only pay return shipping charges for destinations within the 48 continguous U.S.A., if the returned product is covered by the limited warranty. WHAT THIS WAANTY DOES NOT COVE: This warranty does not cover defects resulting from accidents, alterations, unauthorized repair, failure to follow instructions, misuse, commercial use, fire, flood, or acts of God. WHAT WE ASK YOU TO DO: If there is a covered defect, please write or us within 90 days of the date of purchase at the address noted on page 8 to obtain instructions and authorization to return the product to umisource. You will need to pack the product securely in packaging providing at least the degree of protection of the original carton and packing materials and ship it to us at your expense. You will also need to include with the product (a) a copy of your original proof of purchase (retail receipt) showing the date of purchase and (b) a detailed explanation of the problem(s) requiring service. TO THE EXTENT PEMITTED BY AW, THIS IMITED WAANTY AND THE EMEDIES SET FOTH ABOVE AE EXCUSIVE AND IN IEU OF A OTHE WAANTIES, EMEDIES AND CONDITIONS, OA O WITTEN, EXPESS O IMPIED. TO THE EXTENT PEMITTED BY AW, UMISOUCE HEEBY DISCAIMS ANY IMPIED WAANTIES, INCUDING WITHOUT IMITATION, WAANTIES OF MECHANTABIITY AND FITNESS FO A PATICUA PUPOSE. TO THE EXTENT APPICABE STATE AW EXCUDES SUCH DISCAIMES, THEN TO THE EXTENT AOWED BY AW, THE TIME FO ANY CAIMS FO SUCH IMPIED WAANTIES SHA EXPIE 90 DAYS FOM THE DATE OF OIGINA CONSUME PUCHASE. TO THE EXTENT PEMITTED BY AW, UMISOUCE IS NOT ESPONSIBE FO DIECT, SPECIA, INCIDENTA O CONSEQUENTIA DAMAGES, INCUDING BUT NOT IMITED TO OSS OF TIME, INCONVENIENCE, OSS OF USE OF YOU PODUCT, O PESONA INJUY O POPETY DAMAGE, CAUSED BY YOU PODUCT O ITS FAIUE TO WOK. This limited warranty gives you specific legal rights. Some states do not allow the exclusion or limitation of incidental or consequential damages, and applicable law may not permit the exclusion of certain implied warranties. You may also have their rights, which vary, from state to state. Check out our other BOOM affiliated products: BOOMCHAI AMP BOOMCHAI SVC 2950 Old Higgins oad, Elk Grove Village, I customerservice@lumisource.com Phone: (toll free) Phone: (international) umisource, Inc. All rights reserved. BoomChair WI-FX, the BoomChair WI-FX logo, and the Boom logo are trademarks of umisource Inc. Other trademarks are properties of their respective owners. The design of this product is a tradedress of umisource, Inc. Patents pending. Actual contents may differ slightly from those pictured. Made in China. Distributed by umisource Inc., 2950 Old Higgins oad, Elk Grove Village, I This product is not manufactured or distributed by Microsoft the owner of the trademark Xbox, This product is not manufactured or distributed by Nintendo the owner of the trademark GameCube and DS. This product is not manufactured or distributed by Sony the owner of the trademark Playstation PS3, PS2, and PSP. ipod is a registered trademark of Apple Computer, Inc. All ights eserved