Optocoupler, Phototransistor Output, High Temperature

Size: px
Start display at page:

Download "Optocoupler, Phototransistor Output, High Temperature"

Transcription

1 Optocoupler, Phototransistor Output, High Temperature DESCRIPTION The consists of a phototransistor optically coupled to a gallium arsenide infraredemitting diode in a 4 pin plastic dual inline package. AGENCY APPROVALS The safety application model number covering all products in this datasheet is. This model number should be used when consulting safety agency documents. BSI DIN EN (VDE 8845), available with option 1 FIMKO UL 1577 cul 1577 CQC C 1 A E C FEATURES Temperature range 55 C to +11 C Rated impulse voltage (transient overvoltage), V IOTM = 6 kv peak Isolation test voltage (partial discharge test voltage), V pd = 1.6 kv Rated isolation voltage (RMS includes DC), V IOWM = 6 V RMS Rated recurring peak voltage (repetitive) V IORM = 85 V peak Material categorization: for definitions of compliance please see APPLICATIONS Circuits for safe protective separation against electrical shock according to safety class II (reinforced isolation): Application class I to IV at mains voltage 3 V Application class I to IV at mains voltage 6 V according to table 1 of IEC 66641, suitable for: Switchmode power supplies Line receiver Computer peripheral interface Microprocessor system interface ORDERING INFORMATION V O A # X # # T DIP# Option 6 Option 7 AGENCY CERTIFIED/ PACKAGE UL, cul, BSI, FIMKO, CQC PART NUMBER CTR BIN Note Additional options may be possible, please contact sales office PACKAGE OPTION Rev. 2.3, 8Feb17 1 Document Number: ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT TAPE AND REEL CTR (%) 5 ma 1 ma 5 ma 5 to 6 4 to 8 63 to to 2 16 to 32 5 to 15 1 to 3 8 to to 26 2 to 4 DIP DIP4, 4 mil, option 6 X6 1X6 2X6 3X6 4X6 5X6 6X6 7X6 8X6 9X6 SMD4, option 7 X7T 1X7T 2X7T 3X7T 4X7T 5X7T 6X7T 7X7T 8X7T 9X7T SMD4, option 8 3X8T SMD4, option 9 X9T 1X9T 2X9T 3X9T 4X9T 5X9T 6X9T 7X9T 9X9T UL, cul, BSI, FIMKO, CQC, VDE (option 1) DIP4 DIP4, 4 mil, option 6 SMD4, option 7 5 to 6 4 to 8 63 to to 2 16 to 32 5 to 15 1 to 3 8 to to 26 2 to 4 X1 1X1 9X16 9X17T X17T 1X17T SMD4, option 8 SMD4, option 9 1X19T 2X19T 5X16 2X1 2X16 3X1 3X16 3X17T 3X18T 3X19T 4X1 4X16 4X17T 4X18T 4X19T 6X1 7X1 6X17T 7X17T 7.62 mm 1.16 mm >.6 mm Option mm 8X1 8X16 8X17T 8X18T Option 9 > 8 mm

2 ABSOLUTE MAXIMUM RATINGS (T amb = 25 C, unless otherwise specified) PARAMETER TEST CONDITION SYMBOL VALUE UNIT INPUT Reverse voltage V R 6 V Forward current 6 ma Forward surge current t p 1 μs SM 1.5 A LED power dissipation at 25 C P diss 1 mw OUTPUT Collector emitter voltage V CEO 7 V Emitter collector voltage V ECO 7 V Collector current I C 5 ma Collector peak current t p /T =.5, t p 1 ms I CM 1 ma Output power dissipation at 25 C P diss 15 mw COUPLER Operating ambient temperature range T amb 55 to +11 C Storage temperature range T stg 55 to +125 C Soldering temperature (1) 2 mm from case, 1 s T sld 26 C Notes Stresses in excess of the absolute maximum ratings can cause permanent damage to the device. Functional operation of the device is not implied at these or any other conditions in excess of those given in the operational sections of this document. Exposure to absolute maximum ratings for extended periods of the time can adversely affect reliability (1) Refer to reflow profile for soldering conditions for surface mounted devices (SMD), and wave profile for soldering conditions for through hole devices (DIP), please go to Assembly Instructions ( 2 P tot Power Dissipation (mw) Diode Phototransistor T amb Ambient Temperature ( C) Fig. 1 Permissible Power Dissipation vs. Ambient Temperature ELECTRICAL CHARACTERISTICS (T amb = 25 C, unless otherwise specified) PARAMETER TEST CONDITION SYMBOL MIN. TYP. MAX. UNIT INPUT Forward voltage = 5 ma V F V Reverse current V R = 6 V I R 1 μa Junction capacitance V R =, f = 1 MHz C j 5 pf OUTPUT Collector emitter voltage I C = 1 ma V CEO 7 V Emitter collector voltage I E = 1 μa V ECO 7 V Collector emitter leakage current V CE = 2 V, = I CEO 1 1 na COUPLER Collector emitter saturation voltage = 1 ma, I C = 1 ma V CEsat.3 V Cutoff frequency V CE = 5 V, = 1 ma, R L = 1 Ω f c 11 khz Coupling capacitance f = 1 MHz C k.6 pf Note Minimum and maximum values are testing requirements. Typical values are characteristics of the device and are the result of engineering evaluation. Typical values are for information only and are not part of the testing requirements Rev. 2.3, 8Feb17 2 Document Number: ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT

3 CURRENT TRANSFER RATIO (T amb = 25 C, unless otherwise specified) PARAMETER TEST CONDITION PART SYMBOL MIN. TYP. MAX. UNIT 1 CTR 13 3 % V CE = 5 V, = 1 ma 2 CTR % 3 CTR 34 7 % 4 CTR 56 9 % CTR 5 6 % 5 CTR 5 15 % I C / V CE = 5 V, = 5 ma 6 CTR 1 3 % 7 CTR 8 16 % 8 CTR % 9 CTR 2 4 % 1 CTR 4 8 % V CE = 5 V, = 1 ma 2 CTR % 3 CTR 1 2 % 4 CTR % SAFETY AND INSULATION RATED PARAMETERS PARAMETER TEST CONDITION SYMBOL VALUE UNIT Climatic classification According to IEC 68 part 1 55 / 11 / 21 Pollution degree According to DIN VDE 19 2 Comparative tracking index Insulation group IIIa CTI 25 Maximum rated withstanding isolation voltage According to UL1577, t = 1 min V ISO 5 V AC Maximum transient isolation voltage According to DIN EN V IOTM 6 V peak Maximum repetitive peak isolation voltage According to DIN EN V IORM 85 V peak T amb = 25 C, V IO = 5 V R IO 1 12 Ω Isolation resistance T amb = 1 C, V IO = 5 V R IO 1 11 Ω T amb = T S, V IO = 5 V R IO 1 9 Ω Output safety power P SO 265 mw Input safety current I SI 13 ma Input safety temperature T S 15 C Creepage distance DIP4; SMD4, option 7; 7.6 mm Clearance distance SMD4, option mm Creepage distance DIP4, 4 mil, option 6; 8. mm Clearance distance SMD4, option 8 8. mm Insulation thickness DTI.4 mm Input to output test voltage, method B Input to output test voltage, method A V IORM x = V PR, 1 % production test with t M = 1 s, partial discharge < 5 pc V IORM x 1.6 = V PR, 1 % sample test with t M = 1 s, partial discharge < 5 pc V PR 16 V peak V PR 136 V peak Note According to DIN EN (VDE 884), (see Fig. 2). This optocoupler is suitable for safe electrical isolation only within the safety ratings. Compliance with the safety ratings shall be ensured by means of suitable protective circuits Rev. 2.3, 8Feb17 3 Document Number: ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT

4 Phototransistor P SO (mw) V IOTM t 1, t 2 = 1 s to 1 s t 3, t 4 = 1 s t test = 1 s t stres = 12 s 15 1 V pd V IOWM V IORM 5 IRdiode I SI (ma) T SI Safety Temperature ( C) t 1 t Tr = 6 s t 3 t test t 4 t 2 t stres t Fig. 2 Derating Diagram Fig. 3 Test Pulse Diagram for Sample Test According to DIN EN (VDE 884); IEC SWITCHING CHARACTERISTICS (T amb = 25 C, unless otherwise specified) PARAMETER TEST CONDITION SYMBOL MIN. TYP. MAX. UNIT Delay time V S = 5 V, I C = 2 ma, R L = 1 Ω t d 3 μs Rise time V S = 5 V, I C = 2 ma, R L = 1 Ω t r 3 μs Fall time V S = 5 V, I C = 2 ma, R L = 1 Ω t f 4.7 μs Storage time V S = 5 V, I C = 2 ma, R L = 1 Ω t s.3 μs Turnon time V S = 5 V, I C = 2 ma, R L = 1 Ω t on 6 μs Turnoff time V S = 5 V, I C = 2 ma, R L = 1 Ω t off 5 μs Turnon time V S = 5 V, = 1 ma, R L = 1 kω t on 3 μs Turnoff time V S = 5 V, = 1 ma, R L = 1 kω t off 1 μs V CC = 5 V Input pulse Input R L 1 % V OUT 9 % Output pulse t r t f t on t off Fig. 4 Test Circuit Fig. 5 Test Circuit and Waveforms Rev. 2.3, 8Feb17 4 Document Number: ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT

5 TYPICAL CHARACTERISTICS (T amb = 25 C, unless otherwise specified) Forward Current (ma) 1 T amb = 5 C T amb = 75 C 1 T amb = 11 C T amb = 25 C 1 T amb = 55 C T amb = C V F Forward Voltage (V) I C Collector Current (ma) 3 25 = 25 ma 2 15 = 1 ma 1 = 5 ma 5 = 1 ma = 2 ma V CE Collector Emitter Voltage (sat) (V) Fig. 6 Forward Current vs. Forward Voltage Fig. 9 Collector Current vs. Collector Emitter Voltage (saturated) I C Collector Current (ma) 2 = 3 ma 15 = 2 ma 1 = 15 ma I 5 F = 1 ma = 5 ma V CE Collector Emitter Voltage (NS) (V) N CTR Normalized CTR (sat) = 5 ma = 1 ma V CE =.4 V Normalized to: = 1 ma, V CE = 5 V, T amb = 25 C T amb Ambient Temperature ( C) Fig. 7 Collector Current vs. Collector Emitter Voltage (nonsaturated) Fig. 1 Normalized CTR (saturated) vs. Ambient Temperature = ma 1 V CE = 4 V 1 V CE = 12 V V CE = 24 V T amb Ambient Temperature ( C) I CE Leakage Current (na) N CTR Normalized CTR (NS) = 1 ma = 5 ma.2 Normalized to: = 1 ma, V CE = 5 V, T amb = 25 C T amb Ambient Temperature ( C) Fig. 8 Leakage Current vs. Ambient Temperature Fig. 11 Normalized CTR (nonsaturated) vs. Ambient Temperature Rev. 2.3, 8Feb17 5 Document Number: ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT

6 N CTR Normalized CTR (NS) T amb = C T amb = 55 C T amb = 25 C T amb = 75 C T amb = 11 C Normalized to: = 1 ma, V CE = 5 V, T amb = 25 C Forward Current (ma) Phase (deg) 2 V CE = 5 V f (khz) Fig. 12 Normalized CTR (nonsaturated) vs. Forward Current Fig. 15 Phase Angle vs. Frequency N CTR Normalized CTR (sat) V CE =.4 V T amb = C T amb = 55 C T amb = 25 C T amb = 75 C T amb = 11 C Normalized to: = 1 ma, V CE = 5 V, T amb = 25 C Forward Current (ma) t on, t off Switching Time (μs) 1 V CE = 5 V, = 1 ma 1 t off (μs) 1 t on (μs) R L Load Resistance (kω) Fig. 13 Normalized CTR (saturated) vs. Forward Current Fig. 16 Switching Time vs. Load Resistance 1 V CC = 5 V F CTR (khz) I C (ma) Fig. 14 F CTR vs. I C (saturated) (ma) Rev. 2.3, 8Feb17 6 Document Number: ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT

7 PACKAGE DIMENSIONS (in millimeters) 6.5 ±.3 Pin 1 identifier 4.58 ± to ± typ. 3.5 ± ± ±.1 to ±.5.5 ±.1.25 typ. i typ. Option 6 Option 7 Option 8 Option typ typ typ. 1.3 max typ. 2.7 min. 3.5 ±.3.1 min..6 min. 8 min. 4.3 ±.3.6 min..25 ± ± min..1 ± ± max max..6 min. 8 min typ min R min. 13. R R PACKAGE MARKING (example of 3X17T) 3 Notes Only options 1, 7, and 8 are reflected in the package marking The VDE logo is only marked on option1 parts Tape and reel suffix (T) is not part of the package marking V YWW 24 Rev. 2.3, 8Feb17 7 Document Number: ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT

8 PACKING INFORMATION (in millimeters) TUBE PACKING TYPE UNITS/TUBE TUBES/BOX UNITS/BOX DIP4, standard and option TAPE AND REEL PACKING TYPE UNITS/TUBE SMD4, option 7 and option 9 1 SMD4, option 8 2 Top cover tape Embossed carrier Fig. 17 Tape and Reel Shipping Medium Embossment 1 pitch cumulative tolerance on tape ±.2.35 ±.1 2 ±.1 4 ± ± ± ±.1 16 ±.3 5 max. 5 max. X X 12 ± ± ± ±.1 Section XX Fig. 18 Tape and Reel Packing for Option 7 and Option 9 (1 units per reel) Rev. 2.3, 8Feb17 8 Document Number: ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT

9 .35 ±.1 2 ±.1 4 ± ± ± ± ±.1 24 ±.3 5 max. 5 max. X X 8 ± ± ± ±.1 Section XX R.76 Fig. 19 Tape and Reel Packing for Option 8 (2 units per reel) Rev. 2.3, 8Feb17 9 Document Number: ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT

10 Legal Disclaimer Notice Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, Vishay ), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, noninfringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer s technical experts. Product specifications do not expand or otherwise modify Vishay s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, lifesaving, or lifesustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. 217 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED Revision: 8Feb17 1 Document Number: 91

Optocoupler, Low Input Current, Phototransistor Output

Optocoupler, Low Input Current, Phototransistor Output Optocoupler, Low Input Current, Phototransistor Output FEATURES Temperature range - 55 C to + 11 C Rated impulse voltage (transient overvoltage) V IOTM = 6 kv peak Isolation test voltage (partial discharge

More information

Optocoupler, Phototransistor Output, High Temperature, 110 C Rated

Optocoupler, Phototransistor Output, High Temperature, 110 C Rated Optocoupler, Phototransistor Output, High Temperature, 11 C Rated 1791823 DESCRIPTION The consists of a phototransistor optically coupled to a gallium arsenide infraredemitting diode in a 4 pin plastic

More information

Optocoupler, Phototransistor Output, High Reliability, 5300 V RMS

Optocoupler, Phototransistor Output, High Reliability, 5300 V RMS Optocoupler, Phototransistor Output, High Reliability, 53 V RMS FEATURES Excellent CTR linearity depending on forward current Isolation test voltage, 53 V RMS A 1 4 C Fast switching times C 2 3 E Low CTR

More information

Optocoupler, Phototransistor Output, with Base Connection

Optocoupler, Phototransistor Output, with Base Connection Optocoupler, Phototransistor Output, with Base Connection FEATURES A 1 6 B Isolation test voltage: 5 V RMS Long term stability C 2 5 C Industry standard dual-in-line package NC 3 4 E Material categorization:

More information

Optocoupler, Phototransistor Output, High Reliability, 5300 V RMS

Optocoupler, Phototransistor Output, High Reliability, 5300 V RMS Optocoupler, Phototransistor Output, High Reliability, 53 V RMS A C 1 2 4 3 C E FEATURES Operating temperature from -55 C to +11 C Good CTR linearity depending on forward current Isolation test voltage,

More information

Optocoupler, Phototransistor Output, SSOP-4, Half Pitch, Mini-Flat Package

Optocoupler, Phototransistor Output, SSOP-4, Half Pitch, Mini-Flat Package Optocoupler, Phototransistor Output, SSOP-4, Half Pitch, Mini-Flat Package 22628- DESCRIPTION The series has a GaAs infrared emitting diode emitter, which is optically coupled to a silicon planar phototransistor

More information

Optocoupler, Phototransistor Output, AC Input, Low Input Current, SSOP-4, Half Pitch, Mini-Flat Package

Optocoupler, Phototransistor Output, AC Input, Low Input Current, SSOP-4, Half Pitch, Mini-Flat Package Optocoupler, Phototransistor Output, AC Input, Low Input Current, SSOP-4, Half Pitch, Mini-Flat Package 22628- DESCRIPTION The series has a GaAs infrared emitting diode emitter, which is optically coupled

More information

Optocoupler, Phototransistor Output, High Reliability, 5300 V RMS, Low Input Current

Optocoupler, Phototransistor Output, High Reliability, 5300 V RMS, Low Input Current Optocoupler, Phototransistor Output, High Reliability, 53 V RMS, Low Input Current FEATURES A C 1 2 4 3 C E Operating temperature from -55 C to +11 C Good CTR linearity depending on forward current Isolation

More information

Optocoupler, Phototransistor Output, SOP-6L5, Half Pitch, Long Mini-Flat Package

Optocoupler, Phototransistor Output, SOP-6L5, Half Pitch, Long Mini-Flat Package TCLT11. Series Optocoupler, Phototransistor Output, SOP-6L5, Half Pitch, Long Mini-Flat Package 22649 DESCRIPTION The TCLT11. series consists of a phototransistor optically coupled to a gallium arsenide

More information

Low Input Current, Phototransistor Output, SOP-4, Mini-Flat Package

Low Input Current, Phototransistor Output, SOP-4, Mini-Flat Package VOM68A Low Input Current, Phototransistor Output, SOP-4, Mini-Flat Package FEATURES Operating temperature from - 55 C to + C A 4 C SOP-4 mini-flat package CTR range 4 % to 6 %, I F = ma C 2 3 E Isolation

More information

Optocoupler, Phototransistor Output, High Reliability, 5300 V RMS, 110 C Rated

Optocoupler, Phototransistor Output, High Reliability, 5300 V RMS, 110 C Rated Optocoupler, Phototransistor Output, High Reliability, 53 V RMS, 11 C Rated 17918-2 DESCRIPTION The 11 C rated (DIP) feature a high current transfer ratio, low coupling capacitance and high isolation voltage.

More information

Optocoupler, Phototransistor Output, Low Input Current

Optocoupler, Phototransistor Output, Low Input Current Optocoupler, Phototransistor Output, Low Input Current A C 2 4 3 C E FEATURES Good CTR linearity depending on forward current Low CTR degradation High collector emitter voltage, V CEO = 55 V Isolation

More information

Optocoupler, Phototransistor Output, Low Input Current, SSOP-4, Half Pitch, Mini-Flat Package

Optocoupler, Phototransistor Output, Low Input Current, SSOP-4, Half Pitch, Mini-Flat Package Optocoupler, Phototransistor Output, Low Input Current, SSOP-4, Half Pitch, Mini-Flat Package 22628- DESCRIPTION The series has a GaAs infrared emitting diode emitter, which is optically coupled to a silicon

More information

Optocoupler, Phototransistor Output, Quad Channel, Half Pitch Mini-Flat Package

Optocoupler, Phototransistor Output, Quad Channel, Half Pitch Mini-Flat Package TCMT4, TCMT46 Optocoupler, Phototransistor Output, Quad Channel, Half Pitch Mini-Flat Package 22775 DESCRIPTION The TCMT4. series consist of a phototransistor optically coupled to a gallium arsenide infrared-emitting

More information

Optocoupler, Phototriac Output, 400 V DRM

Optocoupler, Phototriac Output, 400 V DRM VO32, VO321, VO322, VO323 Optocoupler, Phototriac Output, 4 V DRM DESCRIPTION i1794-14 Note: pin 5 must not be connected ~ ~ 6 5 4 1 2 3 A (+) C (-) NC The VO32 series consists of a phototriac optically

More information

Optocoupler, Phototransistor Output, High Reliability, 5300 V RMS

Optocoupler, Phototransistor Output, High Reliability, 5300 V RMS Optocoupler, Phototransistor Output, High Reliability, 53 V RMS FEATURES Good CTR linearity depending on forward current Isolation test voltage, 53 V RMS High collector emitter voltage, V CEO = 7 V Low

More information

CNY75A, CNY75B, CNY75C, CNY75GA, CNY75GB, CNY75GC. Optocoupler, Phototransistor Output, with Base Connection

CNY75A, CNY75B, CNY75C, CNY75GA, CNY75GB, CNY75GC. Optocoupler, Phototransistor Output, with Base Connection Vishay Semiconductors Optocoupler, Phototransistor Output, 17201_4 DESCRIPTION C E 5 4 The CNY75A, CNY75B, CNY75C, CNY75GA, CNY75GB, CNY75GC consists of a phototransistor optically coupled to a gallium

More information

Optocoupler, Photodarlington Output

Optocoupler, Photodarlington Output Optocoupler, Photodarlington Output C E FEATURES High isolation test voltage 5300 V RMS Standard plastic DIP-4 package Material categorization: for definitions of compliance please see www.vishay.com/doc?99912

More information

Optocoupler, Phototransistor Output, Very High Isolation Voltage

Optocoupler, Phototransistor Output, Very High Isolation Voltage Vishay Semiconductors Optocoupler, Phototransistor Output, 787-4 DESCRIPTION CNY64 CNY65 CNY66 Top View A C The CNY64, CNY65, and CNY66 consist of a phototransistor optically coupled to a gallium arsenide

More information

Optocoupler, Photodarlington Output, SOP-4L, Long Mini-Flat Package

Optocoupler, Photodarlington Output, SOP-4L, Long Mini-Flat Package Optocoupler, Photodarlington Output, SOP-4L, Long Mini-Flat Package 7295-5 DESCRIPTION The consists of a darlington phototransistor optically coupled to a gallium arsenide infrared-emitting diode in a

More information

Optocoupler, Phototransistor Output, AC Input, Single / Quad Channel, Half Pitch Mini-Flat Package

Optocoupler, Phototransistor Output, AC Input, Single / Quad Channel, Half Pitch Mini-Flat Package TCMT16, TCMT46, TCMT466 Optocoupler, Phototransistor Output, AC Input, Single / Quad Channel, Half Pitch Mini-Flat Package FEATURES Low profile package (half pitch) 22775 22628-1 C E 9 AC isolation test

More information

Optocoupler, Phototransistor Output, with Base Connection

Optocoupler, Phototransistor Output, with Base Connection SFH6 Optocoupler, Phototransistor Output, with Base Connection FEATURES i79- DESCRIPTION The SFH6 is an optocoupler with a gallium arsenide LED emitter which is optically coupled with a silicon planar

More information

Optocoupler, Phototriac Output, Non-Zero Crossing, 250 V DRM

Optocoupler, Phototriac Output, Non-Zero Crossing, 250 V DRM Optocoupler, Phototriac Output, Non-Zero Crossing, 25 V DRM SMD A C 2 6 5 MT2 NC FEATURES Isolation materials according to UL 94 V- Special construction: therefore, extra low coupling capacity of typical.2

More information

Optocoupler, Phototransistor Output

Optocoupler, Phototransistor Output 72_4 DESCRIPTION 8537_4 C E 5 4 The series consists of a phototransistor optically coupled to a gallium arsenide infrared-emitting diode in a 6-lead plastic dual inline package. VDE STANDARDS These couplers

More information

Optocoupler, Phototransistor Output, with Base Connection

Optocoupler, Phototransistor Output, with Base Connection Optocoupler, Phototransistor Output, with Base Connection i79004-3 A C NC 2 3 6 5 4 B C E FEATURES Interfaces with common logic families Input-output coupling capacitance < pf Industry standard dual-in

More information

Optocoupler, Phototransistor Output, AC Input, SOP-4L, Long Mini-Flat Package

Optocoupler, Phototransistor Output, AC Input, SOP-4L, Long Mini-Flat Package Optocoupler, Phototransistor Output, AC Input, SOP-4L, Long Mini-Flat Package 17295-5 DESCRIPTION The consists of a phototransistor optically coupled to 2 gallium arsenide infrared-emitting diodes in an

More information

Optocoupler, Photodarlington Output, High Gain, With Base Connection

Optocoupler, Photodarlington Output, High Gain, With Base Connection Optocoupler, Photodarlington Output, High Gain, With Base Connection FEATURES A 6 B Very high current transfer ratio, 500 % min. C 2 NC 3 i79005_ V D E 5 4 C E High isolation resistance, 0 Ω typical Standard

More information

Optocoupler, Phototransistor Output

Optocoupler, Phototransistor Output Optocoupler, Phototransistor Output TCDT2, TCDT2G Vishay Semiconductors 72_4 DESCRIPTION 72_6 NC C E 6 5 4 2 3 The TCDT2(G) series consists of a phototransistor optically coupled to a gallium arsenide

More information

Optocoupler, Photodarlington Output, High Gain, 300 V BV CEO

Optocoupler, Photodarlington Output, High Gain, 300 V BV CEO Optocoupler, Photodarlington Output, High Gain, 300 V BO i79060 DESCRIPTION i79062-3 The is optically coupled isolators with a gallium arsenide infrared LED and a silicon photodarlington sensor. Switching

More information

Optocoupler, Photodarlington Output, High Gain, Single/Quad Channel, Half Pitch Mini-Flat Package

Optocoupler, Photodarlington Output, High Gain, Single/Quad Channel, Half Pitch Mini-Flat Package TCMD, TCMD4 Optocoupler, Photodarlington Output, High Gain, Single/Quad Channel, Half Pitch Mini-Flat Package 9 8 FEATURES Low profile package (half pitch) 7298 7298_2 DESCRIPTION The TCMD, TCMD4 consist

More information

Optocoupler, Photodarlington Output, High Gain, With Base Connection

Optocoupler, Photodarlington Output, High Gain, With Base Connection Optocoupler, Photodarlington Output, High Gain, With Base Connection A C 2 NC 3 i79005_ V D E 6 5 4 B C E FEATURES Very high current transfer ratio, 500 % min. High isolation resistance, 0 Ω typical Standard

More information

Optocoupler, Phototransistor Output, High Temperature

Optocoupler, Phototransistor Output, High Temperature TCET, TCETG Optocoupler, Phototransistor Output, 797_4 DESCRIPTION The TCET. consists of a phototransistor optically coupled to a gallium arsenide infrared-emitting diode in a 4-lead plastic dual inline

More information

CNY75A, CNY75B, CNY75C, CNY75GA, CNY75GB, CNY75GC. Optocoupler, Phototransistor Output, with Base Connection

CNY75A, CNY75B, CNY75C, CNY75GA, CNY75GB, CNY75GC. Optocoupler, Phototransistor Output, with Base Connection Vishay Semiconductors Optocoupler, Phototransistor Output, 17201_4 DESCRIPTION C E 5 4 The CNY75A, CNY75B, CNY75C, CNY75GA, CNY75GB, CNY75GC consists of a phototransistor optically coupled to a gallium

More information

Optocoupler, Phototransistor Output, High Reliability, 5300 V RMS

Optocoupler, Phototransistor Output, High Reliability, 5300 V RMS Optocoupler, Phototransistor Output, High Reliability, 5300 V RMS 17448-5 1 DESCRIPTION The features a variety of transfer ratios, low coupling capacitance and high isolation voltage. This coupler has

More information

Optocoupler, Phototransistor Output, Dual Channel, SOIC-8 Package

Optocoupler, Phototransistor Output, Dual Channel, SOIC-8 Package ILD25T, ILD26T, ILD27T, ILD211T, ILD213T Optocoupler, Phototransistor Output, Dual Channel, SOIC-8 Package i17925 A1 C2 A3 C4 i17918-2 8C 7E 6C 5E DESCRIPTION The ILD25T, ILD26T, ILD27T, ILD211T, and ILD213T

More information

Optocoupler, Phototransistor Output, High Reliability, 5300 V RMS

Optocoupler, Phototransistor Output, High Reliability, 5300 V RMS SFH61AA, SFH61AGB, SFH61AGR, SFH61AY Optocoupler, Phototransistor Output, High Reliability, 3 V RMS FEATURES Low CTR degradation A 1 4 C Good CTR linearity depending on forward current i1796 DESCRIPTION

More information

Optocoupler Phototransistor Output, SOP-4, Mini-Flat Package, 110 C Rated

Optocoupler Phototransistor Output, SOP-4, Mini-Flat Package, 110 C Rated SFH69AT, SFH69BT, SFH69CT, SFH69ABT Optocoupler Phototransistor Output, SOP-4, Mini-Flat Package, C Rated FEATURES Operating temperature from - 55 C to + C A 4 C SOP (small outline package) Isolation test

More information

Optocoupler, Phototransistor Output, with Base Connection

Optocoupler, Phototransistor Output, with Base Connection Alternative Device Available, Use CNY7 www.vishay.com CNY7., CNY7G Optocoupler, Phototransistor Output, with Base Connection FEATURES 7_ DESCRIPTION i79- The CNY7 is an optically coupled pair consisting

More information

Optocoupler, Phototransistor Output, Single/Quad Channel, Half Pitch Mini-Flat Package

Optocoupler, Phototransistor Output, Single/Quad Channel, Half Pitch Mini-Flat Package TCMT Series, TCMT4 Series Optocoupler, Phototransistor Output, Single/Quad Channel, Half Pitch Mini-Flat Package FEATURES Low profile package (half pitch) AC isolation test voltage 375 V RMS Low coupling

More information

Optocoupler, Phototransistor Output, Low Input Current, With Base Connection

Optocoupler, Phototransistor Output, Low Input Current, With Base Connection End of Life January-28 - Alternative Device: CNY7 MCT2 Optocoupler, Phototransistor Output, Low Input Current, With Base Connection FEATURES A 6 B Saturation CTR - MCT2, > % at I F =.6 ma i794-3 i794-7

More information

Optocoupler, Phototransistor Output, Single/Quad Channel, Half Pitch Mini-Flat Package

Optocoupler, Phototransistor Output, Single/Quad Channel, Half Pitch Mini-Flat Package TCMT Series, TCMT4 Series Vishay Semiconductors Optocoupler, Phototransistor Output, Single/Quad Channel, Half Pitch FEATURES Low profile package (half pitch) AC isolation test voltage 375 V RMS Low coupling

More information

Optocoupler, Phototransistor Output, High Reliability, 5300 V RMS

Optocoupler, Phototransistor Output, High Reliability, 5300 V RMS SFH61AA, SFH61AGB, SFH61AGR, SFH61ABM, SFH61ABL, SFH61AY, SFH61AB Optocoupler, Phototransistor Output, High Reliability, 3 V RMS FEATURES Low CTR degradation A 1 4 C Good CTR linearity depending on forward

More information

Analog High Speed Coupler, High Noise Immunity, 1 MBd, 15 kv/μs

Analog High Speed Coupler, High Noise Immunity, 1 MBd, 15 kv/μs Analog High Speed Coupler, High Noise Immunity, MBd, kv/μs DESCRIPTION The is an optocoupler with a GaAlAs infrared emitting diode, optically coupled to an integrated photo detector consisting of a photo

More information

Optocoupler, Phototransistor Output, Very High Isolation Voltage

Optocoupler, Phototransistor Output, Very High Isolation Voltage Optocoupler, Phototransistor Output, Very High Isolation Voltage CNY64ST Top View A C FEATURES Rated recurring peak voltage (repetitive) V IORM = 145 V peak Thickness through insulation 3 mm CNY65ST Creepage

More information

Optocoupler, Phototransistor Output, AC Input, with Base Connection

Optocoupler, Phototransistor Output, AC Input, with Base Connection IL250, IL25, IL252, ILD252 Optocoupler, Phototransistor Output, AC Input, with Base Connection i79037- A/C C/A DESCRIPTION The IL250, IL25, IL252, ILD252 are bidirectional input optically coupled isolators

More information

Optocoupler, Phototransistor Output, with Base Connection in SOIC-8 Package

Optocoupler, Phototransistor Output, with Base Connection in SOIC-8 Package Optocoupler, Phototransistor Output, with Base Connection in SOIC-8 Package i79074 A K 2 NC 3 NC 4 i79002-8 NC 7 B 6 C 5 E V D E DESCRIPTION The are optically coupled pairs with a gallium arsenide infrared

More information

1 Form A Solid-State Relay

1 Form A Solid-State Relay 1 Form A Solid-State Relay FEATURES Current limit protection A 1 C 2 3 6 5 4 S 1 DC S 2 Isolation test voltage 53 V RMS Typical R ON 22 Ω Load voltage 4 V Load current 14 ma / 27 ma High surge capability

More information

Optocoupler, Phototransistor Output, High Reliability, 5300 V RMS

Optocoupler, Phototransistor Output, High Reliability, 5300 V RMS Vishay Semiconductors Optocoupler, Phototransistor Output, FEATURES Excellent CTR linearity depending on forward current 17448 DESCRIPTION 1 A 1 C 2 The SFH615A (DIP) and SFH6156 (SMD) feature a variety

More information

Optocoupler, Photodarlington Output, (Single, Dual, Quad Channel)

Optocoupler, Photodarlington Output, (Single, Dual, Quad Channel) Optocoupler, Photodarlington Output, (Single, Dual, Quad Channel) Single Channel Dual Channel Quad Channel A C 2 NC 3 A C 2 C 3 A 4 A C 2 C 3 A 4 6 B 5 C 4 E 8 E 7 C 6 C 5 E 6 E 5 C 4 C 3 E FEATURES 25

More information

Optocoupler, Phototransistor Output, with Base Connection, 300 V BV CEO

Optocoupler, Phototransistor Output, with Base Connection, 300 V BV CEO SFH64 Optocoupler, Phototransistor Output, with Base Connection, 3 V BV CEO i1794-3 DESCRIPTION The SFH64 is an optocoupler with very high BV CER, a minimum of 3 V. It is intended for telecommunications

More information

Optocoupler, Phototriac Output, Zero Crossing, 1.5 kv/μs dv/dt, 600 V

Optocoupler, Phototriac Output, Zero Crossing, 1.5 kv/μs dv/dt, 600 V Optocoupler, Phototriac Output, Zero Crossing, 1.5 kv/μs dv/dt, 6 V FEATURES 15 V/μs dv/dt minimum 6 V blocking voltage ma on-state current Zero crossing detector A C 1 2 6 5 MT2 NC Low input trigger current

More information

Optocoupler, Phototransistor Output, Very High Isolation Voltage

Optocoupler, Phototransistor Output, Very High Isolation Voltage CNY64, CNY65, CNY66 Optocoupler, Phototransistor Output, 64 Top View A C 65 66 FEATURES Rated recurring peak voltage (repetitive) V IORM = V RMS Thickness through insulation 3 mm 4 Creepage current resistance

More information

1 Form A Solid-State Relay (Normally Open)

1 Form A Solid-State Relay (Normally Open) Form A Solid-State Relay (Normally Open) FEATURES Isolation test voltage 53 V RMS A 4 S Typical R ON 22 Ω Load voltage 35 V C 2 3 S 2 Load current 2 ma Clean bounce free switching Current limit protection

More information

Optocoupler, Power Phototriac

Optocoupler, Power Phototriac Optocoupler, Power Phototriac i17912-3 DESCRIPTION The is an optically coupled phototriac driving an integrated power TRIAC in a DIP-8 package. Featuring galvanic and electrical noise isolation, the is

More information

Optocoupler, Phototransistor Output, SOP-6L5, Half Pitch, Long Mini-Flat Package

Optocoupler, Phototransistor Output, SOP-6L5, Half Pitch, Long Mini-Flat Package Optocoupler, Phototransistor Output, FEATURES SMD low profile 5 pin package TCLT..Series Isolation test voltage 5 V RMS CTR flexibility available see order information 7296 5 4 3 2 C V D E Special construction

More information

1 Form A Solid-State Relay (Normally Open)

1 Form A Solid-State Relay (Normally Open) LH151AAB, LH151AABTR, LH151AT 1 Form A Solid-State Relay (Normally Open) FEATURES Isolation test voltage 53 V RMS Typical R ON 12 Ω A 1 6 S 1 Load voltage 2 V Load current 2 ma / 35 ma C 2 5 DC Clean bounce

More information

1 Form A Solid-State Relay (Normally Open)

1 Form A Solid-State Relay (Normally Open) LH154AAB, LH154AABTR, LH154AT 1 Form A Solid-State Relay (Normally Open) FEATURES Current limit protection Isolation test voltage 53 V RMS A 1 6 S 1 Typical R ON 22 Ω Load voltage 35 V C 2 5 DC Load current

More information

1 Form A Solid-State Relay (Normally Open)

1 Form A Solid-State Relay (Normally Open) 1 Form A Solid-State Relay (Normally Open) FEATURES Low operating current High speed operation A 1 6 S 1 Isolation test voltage 53 V RMS Current limit protection C 2 5 DC DC only option 3 4 S 2 Clean bounce

More information

Optocoupler, Phototransistor Output, Dual Channel, SOIC-8 Package

Optocoupler, Phototransistor Output, Dual Channel, SOIC-8 Package ILD25T, ILD26T, ILD27T, ILD211T, ILD213T Optocoupler, Phototransistor Output, Dual Channel, SOIC-8 Package i17925 A1 C2 A3 C4 i17918-2 8C 7E 6C 5E DESCRIPTION The ILD25T, ILD26T, ILD27T, ILD211T, and ILD213T

More information

Optocoupler, Phototransistor Output, with Base Connection

Optocoupler, Phototransistor Output, with Base Connection 4N25, 4N26, 4N27, 4N28 Optocoupler, Phototransistor Output, FEATURES A 6 B Isolation test voltage 5000 V RMS Interfaces with common logic families C 2 5 C Input-output coupling capacitance < pf NC 3 4

More information

Optocoupler, Phototriac Output, Non-Zero Crossing, High dv/dt, Low Input Current

Optocoupler, Phototriac Output, Non-Zero Crossing, High dv/dt, Low Input Current Optocoupler, Phototriac Output, Non-Zero Crossing, High dv/dt, Low Input Current FEATURES High isolation distance on output High static dv/dt V/μs High input sensitivity I FT = ma A 6 MT2 ma on-state current

More information

Optocoupler, Photodarlington Output, High Gain, with Base Connection

Optocoupler, Photodarlington Output, High Gain, with Base Connection i79005 DESCRIPTION i79005_ The 4N32 and 4N33 are optically coupled isolators with a gallium arsenide infrared LED and a solicon photodarlington sensor. Switching can be achieved while maintaining a high

More information

Optocoupler, Phototransistor Output, SOP-4L, Long Mini-Flat Package

Optocoupler, Phototransistor Output, SOP-4L, Long Mini-Flat Package Optocoupler, Phototransistor Output, TCLT..Series A C 4 E 3 2 C DESCRIPTION C 7295 V D E The TCLT.. series consists of a phototransistor optically coupled to a gallium arsenide infrared-emitting diode

More information

Optocoupler, Power Phototriac

Optocoupler, Power Phototriac Optocoupler, Power Phototriac i792-3 PIN LED cathode 2 LED anode 3 LED cathode 4 LED cathode 5 Triac gate 6 Triac T 8 Triac T2 DESCRIPTION FUNCTION The is an optically couple phototriac driving a power

More information

Optocoupler, Phototriac Output, Non-Zero Crossing, 0.5 kv/μs dv/dt, 600 V

Optocoupler, Phototriac Output, Non-Zero Crossing, 0.5 kv/μs dv/dt, 600 V Optocoupler, Phototriac Output, Non-Zero Crossing,.5 kv/μs dv/dt, 6 V FEATURES High static dv/dt >.5 kv/μs A 4 MT2 Input sensitivity I FT = 5 ma, 7 ma, and ma On-state RMS current I T(RMS) = 7 ma i7966

More information

Dual Photovoltaic MOSFET Driver Solid-State Relay

Dual Photovoltaic MOSFET Driver Solid-State Relay Dual Photovoltaic MOSFET Driver Solid-State Relay SMD i179034_2 DIP DESCRIPTION - Control 1 + Control 1 - Control 2 + Control 2 8 7 6 5 1 2 3 4 - Output 1 + Output 1 - Output 2 + Output 2 The VO1263AB

More information

1 Form A Solid-State Relay

1 Form A Solid-State Relay 1 Form A Solid-State Relay i17966_6 DESCRIPTION The is an optically isolated 1 form A solid-state relay in a surface mount 4 pin SOP package. APPLICATIONS Security systems Instrumentation Industrial controls

More information

Optocoupler, Phototransistor Output, with Base Connection

Optocoupler, Phototransistor Output, with Base Connection Vishay Semiconductors Optocoupler, Phototransistor Output, FEATURES Isolation test voltage 5 V RMS A 6 B Long term stability Industry standard dual-in-line package C 5 C Compliant to RoHS directive /95/EC

More information

High Speed Optocoupler, 100 kbd, Low Input Current, High Gain

High Speed Optocoupler, 100 kbd, Low Input Current, High Gain SFH6138, SFH6139 High Speed Optocoupler, 100 kbd, i179075 DESCRIPTION i179075_4 High common mode transient immunity and very high current ratio together with 5300 V RMS insulation are achieved by coupling

More information

Optocoupler, Phototransistor Output, AC Input, with Base Connection

Optocoupler, Phototransistor Output, AC Input, with Base Connection Optocoupler, Phototransistor Output, AC Input, with Base Connection HAA Vishay Semiconductors 2842- DESCRIPTION i7900-2 The HAA is a bi-directional input optically coupled isolator consisting of two inverse

More information

Optocoupler, Power Phototriac

Optocoupler, Power Phototriac Optocoupler, Power Phototriac 22663 PIN 2 LED anode 3 LED cathode 4 No connection 5 No connection 6 No connection 7 No connection 9, 13 Triac T2 11 Triac T1 15 Triac gate 2 3 4 5 6 7 FUNCTION 15 13 11

More information

Optocoupler, Phototransistor Output, ATEX Certified

Optocoupler, Phototransistor Output, ATEX Certified Optocoupler, Phototransistor Output, ATEX Certified 6965- DESCRIPTION The consists of a phototransistor optically coupled to an infrared-emitting diode in a 4 pin plastic package. The components are mounted

More information

Optocoupler, Phototransistor Output, with Base Connection

Optocoupler, Phototransistor Output, with Base Connection 4N25, 4N26, 4N27, 4N28 Optocoupler, Phototransistor Output, FEATURES A 6 B Isolation test voltage 5000 V RMS Interfaces with common logic families C 2 5 C Input-output coupling capacitance < pf NC 3 4

More information

Photovoltaic MOSFET Driver with Integrated Fast Turn-Off, Solid-State Relay

Photovoltaic MOSFET Driver with Integrated Fast Turn-Off, Solid-State Relay Photovoltaic MOSFET Driver with Integrated Fast Turn-Off, Solid-State Relay i7966_6 Turn Off FEATURES Open circuit voltage at I F = ma, 8. V typical Short circuit current at I F = ma, 5 μa typical Isolation

More information

Optocoupler, Phototransistor Output, High Reliability, 5300 V RMS

Optocoupler, Phototransistor Output, High Reliability, 5300 V RMS i17906 Optocoupler, Phototransistor Output, DESCRIPTION The SFH610A (DIP) and SFH6106 (SMD) feature a high current transfer ratio, low coupling capacitance and high isolation voltage. These couplers have

More information

Low Profile, 2.5 A Output Current IGBT and MOSFET Driver

Low Profile, 2.5 A Output Current IGBT and MOSFET Driver Low Profile, 2.5 A Output Current IGBT and MOSFET Driver 22677 DESCRIPTION The consists of an infrared light emitting diode optically coupled to an integrated circuit with a power output stage. This optocoupler

More information

High Speed Optocoupler, 100 kbd, Low Input Current, Photodiode Darlington Output

High Speed Optocoupler, 100 kbd, Low Input Current, Photodiode Darlington Output High Speed Optocoupler, 1 kbd, Low Input Current, Photodiode Darlington Output FEATURES High current transfer ratio, 3 % Low input current,.5 ma NC 1 8 V CC High output current, 6 ma A C 2 3 7 6 V B Isolation

More information

Optocoupler, Phototransistor Output, Low Input Current

Optocoupler, Phototransistor Output, Low Input Current Optocoupler, Phototransistor Output, SFH68A/SFH686 FEATURES Good CTR linearity depending on forward current Low CTR degradation High collector emitter voltage, V CEO = 55 V i796 DESCRIPTION A C 2 The SFH68A

More information

Optocoupler, Phototriac Output, High dv/dt, Low Input Current

Optocoupler, Phototriac Output, High dv/dt, Low Input Current IL42, IL428 Optocoupler, Phototriac Output, High dv/dt, Low Input Current A 6 MT2 FEATURES High input sensitivity I FT = 2 ma C 2 NC 6 V, 8 V blocking voltage 2842- NC i793_2 3 4 V D E MT 3 ma on-state

More information

Optocoupler, Phototransistor Output, with Base Connection

Optocoupler, Phototransistor Output, with Base Connection Vishay Semiconductors Optocoupler, Phototransistor Output, FEATURES 2842 DESCRIPTION i79004-5 Each optocoupler consists of gallium arsenide infrared LED and a silicon NPN phototransistor. AGENCY APPROVALS

More information

TCET1100/ TCET1100G. Pb Pb-free. Optocoupler, Phototransistor Output, High Temperature. Vishay Semiconductors

TCET1100/ TCET1100G. Pb Pb-free. Optocoupler, Phototransistor Output, High Temperature. Vishay Semiconductors Optocoupler, Phototransistor Output, High Temperature Features Extra low coupling capacity - typical.2 pf High Common Mode Rejection Low temperature coefficient of CTR CTR offered in 9 groups Reinforced

More information

Optocoupler, Phototransistor Output (Dual, Quad Channel)

Optocoupler, Phototransistor Output (Dual, Quad Channel) i7905- Dual Channel Quad Channel DESCRIPTION Optocoupler, Phototransistor Output A C 2 C 3 A 4 A C 2 C 3 A 4 A 5 C 6 C 7 A 8 8 E 7 C 6 C 5 E 6 E 5 C 4 C 3 E 2 E C C 9 E The ILD74, ILQ74 is an optically

More information

High Speed Optocoupler, Dual, 5 MBd

High Speed Optocoupler, Dual, 5 MBd High Speed Optocoupler, Dual, 5 MBd A1 1 8 V CC FEATURES Data rate 5 MBits/s (2.5 MBit/s over temperature) C1 2 7 V O1 Buffer i179075 DESCRIPTION The dual channel 5 Mb/s SFH6731 and SFH6732 high speed

More information

1 Form A Solid State Relay

1 Form A Solid State Relay Form A Solid State Relay VOAT, VOAABTR FEATURES 9 S S DC S' 3 S' High speed SSR - t on /t off < 8 μs Maximum R ON. Isolation test voltage 3 V RMS Load voltage V Load current A DC configuration DIP- package

More information

High Speed Optocoupler, 1 MBd, Transistor Output

High Speed Optocoupler, 1 MBd, Transistor Output SFH3T, SFH3T, SFH343T High Speed Optocoupler, MBd, i94 DESCRIPTION SFH3/ NC A 2 C 3 NC 4 NC A 2 C 3 NC 4 i99-2 8 V CC The SFH3T, SFH3T, SFH343T, high speed optocouplers, each consists of a GaAlAs infrared

More information

1 Form A Solid State Relay

1 Form A Solid State Relay 1 Form A Solid State Relay DIP i1791- SMD DESCRIPTION Vishay solid state relays (SSRs) are miniature, optically coupled relays with high-voltage MOSFET outputs. The LH1518 relays are capable of switching

More information

Optocoupler, Phototransistor Output, AC Input

Optocoupler, Phototransistor Output, AC Input K84P, K824P, K844P Optocoupler, Phototransistor FEATURES Endstackable to 2.54 mm (.") spacing 722_2 C E A C 4pin DESCRIPTION 8 pin The K84P, K824P, K844P consist of a phototransistor optically coupled

More information

Optocoupler, Phototransistor Output

Optocoupler, Phototransistor Output Vishay Semiconductors Optocoupler, Phototransistor Output FEATURES DC isolation test voltage 5 V RMS Compliant to RoHS directive 22/95/EC and in accordance to WEEE 22/96/EC APPLICATIONS Programmable logic

More information

1 Form A Solid State Relay

1 Form A Solid State Relay 1 Form A Solid State Relay Vishay Semiconductors DIP i1791- SMD DESCRIPTION Vishay solid state relays (SSRs) are miniature, optically coupled relays with high-voltage MOSFET outputs. The LH1518 relays

More information

1 Form A Solid State Relay

1 Form A Solid State Relay LH154AAB, LH154AABTR, LH154AT 1 Form A Solid State Relay Vishay Semiconductors DIP i17941-2 SMD DESCRIPTION The LH154 is robust, ideal for telecom and ground fault applications. It is an SPST normally

More information

Optocoupler, Photodarlington Output, Dual Channel, SOIC-8 Package

Optocoupler, Photodarlington Output, Dual Channel, SOIC-8 Package Optocoupler, Photodarlington Output, i179042 DESCRIPTION A1 C 2 A3 C4 8 C 7E 6C 5E The ILD233T is a high current transfer ratio (CTR) optocoupler. It has a gallium arsenide infrared LED emitter and silicon

More information

1 Form A Solid-State Relay

1 Form A Solid-State Relay 1 Form A Solid-State Relay SMD S S' FEATURES Extremely low operating current High speed operation DIP i1791- DESCRIPTION The LH155 relay are SPST normally open switches (1 form A) that can replace electromechanical

More information

TCLT10.. Series. Optocoupler, Phototransistor Output, SOP-4L, Long Mini-Flat Package. Vishay Semiconductors

TCLT10.. Series. Optocoupler, Phototransistor Output, SOP-4L, Long Mini-Flat Package. Vishay Semiconductors TCLT.. Series Optocoupler, Phototransistor Output, SOP-4L, Long Mini-Flat Package Features SMD Low profile 4 lead package High Isolation 5 V RMS CTR flexibility available see order information e3 Special

More information

Optocoupler, Phototransistor Output, no Base Connection

Optocoupler, Phototransistor Output, no Base Connection CNY7F Optocoupler, Phototransistor FEATURES 86 DESCRIPTION The CNY7F is an optocoupler consisting of a gallium arsenide infrared emitting diode optically coupled to a silicon planar phototransistor detector

More information

Telecom Switch 1 Form A Solid-State Relay

Telecom Switch 1 Form A Solid-State Relay , LH1529BB, Telecom Switch 1 Form A Solid-State Relay DIP S1 S' FEATURES Solid-state relay and optocoupler in one package Surface-mount package SMD i179034_2 DESCRIPTION The LH1529A and LH1529B telecom

More information

Photovoltaic MOSFET Driver with Integrated Fast Turn-Off, Solid-State Relay

Photovoltaic MOSFET Driver with Integrated Fast Turn-Off, Solid-State Relay Photovoltaic MOSFET Driver with Integrated Fast Turn-Off, Solid-State Relay i7966_6 Turn Off FEATURES Open circuit voltage at I F = ma, 8. V typical Short circuit current at I F = ma, 5 μa typical Isolation

More information

2.5 A Output Current IGBT and MOSFET Driver

2.5 A Output Current IGBT and MOSFET Driver VO. A Output Current IGBT and MOSFET Driver 9 DESCRIPTION NC A C NC _ The VO consists of a LED optically coupled to an integrated circuit with a power output stage. This optocoupler is ideally suited for

More information

Optocoupler, Photodarlington Output, High Gain, with Base Connection

Optocoupler, Photodarlington Output, High Gain, with Base Connection Optocoupler, Photodarlington Output, 4N32/4N33 FEATURES A 6 B Very high current transfer ratio, 500 % min. High isolation resistance, 0 Ω typical C NC 2 3 5 4 C E Standard plastic DIP package Lead (Pb)-free

More information

Optocoupler, Phototransistor Output, High Reliability, 5300 V RMS, 110 C Rated

Optocoupler, Phototransistor Output, High Reliability, 5300 V RMS, 110 C Rated SFH67A Optocoupler, Phototransistor Output, FEATURES Operating temperature from - 55 C to + 0 C Good CTR linearity depending on forward current A C 2 DESCRIPTION 4 C 3 E 7907 The 0 C rated SFH67A (DIP)

More information

1 Form A Solid-State Relay

1 Form A Solid-State Relay 1 Form A Solid-State Relay SMD S S' FEATURES Current limit protection DIP i17941-2 S 6 1 DC 5 2 S' 4 3 Isolation test voltage 53 V RMS Typical R ON, max. 25 Load voltage 35 V Load current 1 ma High surge

More information