Universal current sensitive RCCBs B type and F type

Size: px

Start display at page:

Download "Universal current sensitive RCCBs B type and F type"

Harvey Harper
6 years ago
Views:

1 GE Industrial Solutions Universal current sensitive RCCBs B type and F type Ultimate protection of people and equipment ge.com/ex/industrialsolutions

2 Type B applications Controllers and variable speed drives Battery chargers and inverters Frequency converters Photovoltaic systems, a.c side Charging stations for electric vehicles Installation in general where we can expect d.c. smooth direct residual currents Variable speed machine tools UPS, Computer Data Centers Elevator controls Cranes of all kinds Test set-ups in laboratories Backed-up power supplies Electronic equipment on construction sites

3 Residual Current Circuit Breakers Residual Current Protection Devices Types of Wave form detected by RCCBs and classification RCCBs Type AC Type A-Ai Type F Type B Waveform definition Current waveform Tripping current Sine wave 0,5 to 1 IΔn Pulsating half wave 0,35 to 1,4 IΔn Pulsating 90º/135º wave Pulsating Half wave + diret current (6mA) Pulsating Half wave + diret current (10mA) Current delay angle 90º: 0,25 to 1,4 Iδn Current delay angle 135º: 0,11 to 1,4 IΔn max. 1,4 IΔn+6mA max. 1,4 IΔn+10mA Composite wave 0,5 to 1,4 IΔn General view High frequency (up to 1KHz) Current Frequency 150Hz 0,5 to 2,4 IΔn Current Frequency 400Hz 0,5 to 6 IΔn Current Frequency 1000Hz 1 to 14 IΔn Two phase rectified full wave Three phase rectified full wave Direct current 0,5 to 2 IΔn Discover advantages: Type F Offer the same range of protection and functionality as a Type A RCD; this means that release with sinusoidal AC currents as well as pulsating DC currents. In addition to this, they are capable of detecting residual currents from mixed frequencies of up to 1000 Hz, which can often occur on the outgoing feeder side of singlephase frequency converters. This prevents undesirable interruptions to the electrical supply if, for example, pulsed leakage currents of up to ten milliseconds occur at activation of filter capacitors. Type B In adition to release residual current waveforms of type A, B type RCCBs are used to detect smooth DC residual currents. B Type RCCBs are recommended for use with EV Charge and drives and inverters for supplying motors for pumps, lifts, textile machines, machine tools since they recognise a continuous fault current with low level ripple. Type BS Release residual current waveforms of type B with time delay. Type AC: Release with sinusoidal currents which occur suddenly or slowly rise in magnitude. Type A-Ai: Release with sinusoidal currents and also with pulsating direct current which occur suddenly or slowly rise in magnitude. Type S-Si (type A-Ai): Time delay release with sinusoidal currents and also with pulsating direct current which occur suddenly or slowly rise in magnitude. 3

4 RCCBs RCCBs - Residual Current Circuit Breakers RCCB with overcurrent protection Add-on devices Series FP-FIP Performance EN 62423/ VDE Type B Type BS FP FIP (3) Auxiliaries (1) Motor operator (2) Rated current In (A) FP: 16, 25, 40, 63, 80; FIP: 100, 125 Residual current I (ma) 30, 100, 300, 500 Rated Voltage AC Un (V) 2P: 230 4P: 230/400 Minimum operating voltage U min 30 ma (V) 2P: 160 4P: ,300,500 ma (V) 2P: 117 4P: 205 Mechanical/electrical endurange FP: /10.000; FIP>5000 Tropicalisation acc. to EN/IEC /2-30 and DIN %RH at 55ºC Terminal capacity flexible/rigid cable (mm 2 ) FP: 1,5-50; FIP: 1,5-50 Poles FP: 2, 4; FIP: 4 Nuisance tripping resistance 3000A 8/20 msc Ambient temperature (ºC) -25 up to 40 Weight (g) 2P 340 (g) 4P FP: 420; FIP: 500 Short-circuit capacity (1) Series CA - Tele L - Tele U - PBS - TeleREC Plus (2) Only at right side end of the extreme pin busbar (3) Only FIPH model Wiring Acc. To EN/IEC Making and Breaking capacity Im=500A from 16A up to 40A Im=10In from 63 up to 80A Im=1000A (100A) Im=1250A (125A) Residual making and braking capacity I m=50in from 16A up to 40A I m=10in from 63A up to 80A I m=1000 (100A) I m=1250 (125A) Short-circuit capacity Inc=10000A at 230/400V fuse 80A gg Serie FP - Type B Serie FP - Type B 1 N N 2 N N 4

5 Series FP Type B 30 ma 100 ma 300 ma 500 ma In (A) Cat. No. Ref. No. Cat. No. Ref. No. Cat. No. Ref. No. Cat. No. Ref. No. Pack 16 FPB 2 16/ FPB 2 16/ FPB 2 16/ FPB 2 16/ FPB 2 25/ FPB 2 25/ FPB 2 25/ FPB 2 25/ FPB 2 40/ FPB 2 40/ FPB 2 40/ FPB 2 40/ FPB 2 63/ FPB 2 63/ FPB 2 63/ FPB 2 63/ FPB 2 80/ FPB 2 80/ FPB 2 80/ FPB 2 80/ /3 16 FPB 4 16/ FPB 4 16/ FPB 4 16/ FPB 4 16/ FPB 4 25/ FPB 4 25/ FPB 4 25/ FPB 4 25/ FPB 4 40/ FPB 4 40/ FPB 4 40/ FPB 4 40/ FPB 4 63/ FPB 4 63/ FPB 4 63/ FPB 4 63/ FPB 4 80/ FPB 4 80/ FPB 4 80/ FPB 4 80/ Series FIP Type B 1/3 Series FP-FIP 30 ma 100 ma 300 ma 500 ma In (A) Cat. No. Ref. No. Cat. No. Ref. No. Cat. No. Ref. No. Cat. No. Ref. No. Pack 100 FIPB4100/ FIPB4100/ FIPB4100/ FIPB4100/ FIPB4125/ FIPB4125/ FIPB4125/ FIPB4125/ Series FIP Type BS 300 ma 500 ma In (A) Cat. No. Ref. No. Cat. No. Ref. No. Pack 40 FIPBS440/ FIPBS440/ FIPBS463/ FIPBS463/ FIPBS480/ FIPBS480/ FIPBS4100/ FIPBS4100/ FIPBS4125/ FIPBS4125/ Dimensions Series FP Series FIP 5

RCCBs RCCBs - Residual Current Circuit Breakers RCCB with overcurrent protection Add-on devices FP Series FP Performance EN/IEC EN 62423/ VDE 0664-40 Type F Auxiliaries (1) Motor operator (2) (1)

4P: 240/415 Minimum operating voltage U min 30 ma (V) 2P: 160 4P: 258 Mechanical/electrical endurange 20.000/10.000 Tropicalisation acc.

6 RCCBs RCCBs - Residual Current Circuit Breakers RCCB with overcurrent protection Add-on devices FP Series FP Performance EN/IEC EN 62423/ VDE Type F Auxiliaries (1) Motor operator (2) (1) Series CA - Tele L - Tele U - PBS - TeleREC Plus (2) Only at right side end of the extreme pin busbar Rated current In (A) 25, 40, 63, 80 Residual current I (ma) 30 Rated Voltage AC Un (V) 2P: 240 4P: 240/415 Minimum operating voltage U min 30 ma (V) 2P: 160 4P: 258 Mechanical/electrical endurange / Tropicalisation acc. to EN/IEC /2-30 and DIN %RH at 55ºC Terminal capacity flexible/rigid cable (mm 2 ) 1,5-50 (1,5-50) Poles 2, 4 (4) Nuisance tripping resistance 3000A 8/20 msc Ambient temperature (ºC) -25 up to 40 Weight (g) 2P 220 (g) 4P 385 Short-circuit capacity Acc. To EN/IEC Making and Breaking capacity Im=500A from 16A up to 40A Im=10In from 63 up to 80A Im=1000A (100A) Im=1250A (125A) Residual making and braking capacity I m=500 from 16A up to 80A I m=10in from 63A up to 80A Short-circuit capacity Inc=10000A at 240/415V (230V/400V) fuse 80A gg Available soon 6

Pack 25 FPF 2 25/030 565373 40 FPF 2 40/030 565374 63 FPF 2 63/030 565375 80 FPF 2 80/030

7 Series FP Type F 30 ma In (A) Cat. No. Ref. No. Pack 25 FPF 2 25/ FPF 2 40/ FPF 2 63/ FPF 2 80/ /6 25 FPF 4 25/ FPF 4 40/ FPF 4 63/ FPF 4 80/ /3 Series FP Wiring Serie FP - Type F Serie FP - Type F 1 /2 3 /4 1/2 3/4 5/6 N 2 /1 4 /3 2/1 4/3 6/5 N Dimensions 7

8 RCCBs Auxiliaries for FP RCCB with overcurrent protection Series CA Function Cat. No. Ref. No. Pack 1/2 mod. H CA H S/H CA S/H S/H CA S/H G golden contacts Series CB Function Cat. No. Ref. No. Pack 1/2 mod. SH/HH CB SH/HH-R (1) /40 1/40 (1) Coupling on the right Wiring Serie CA Serie CB H Auxiliaries for FIP 100A and 125 A Contacts Cat. No. Ref. No. Pack 1/2 mod. 1NO+1NC FIPH

Add-on Devices for FP Tele MP - Motor operator Voltage Cat. No. Ref. No. Pack 3 mod.

Auxiliary - Add-on Devices Tele U - Undervoltage release Voltage Cat. No.

9 Add-on Devices for FP Tele MP - Motor operator Voltage Cat. No. Ref. No. Pack 3 mod. AC 230V TELE MP Tele L - Shunt trip Voltage Cat. No. Ref. No. Pack AC 24-60V DC 24-48V TELE L AC V DC V TELE L Auxiliary - Add-on Devices Tele U - Undervoltage release Voltage Cat. No. Ref. No. Pack AC 240V TELE U AC/DC 12V TELE U AC/DC 24V TELE U AC/DC 48V TELE U PBS - Panel board switch Cat. No. Ref. No. Pack 1/2 mod. PBS Wiring Tele MP Tele L Tele U PBS 9

10 RCCBs Technical data RCCB with overcurrent protection Series FP Type B FIP Type B-BS FP Type F Standards EN 62423/ VDE EN 62423/ VDE EN 62423/ VDE Magnetic tripping characteristics Residual tripping characteristic B BS F Tripping time at I Δn Instantaneous ms <300 <300 <300 Selective ms - >130 - Rated current A 16, 25, 40, 63, 80 B: 100,125; BS:40,63,80,100,125 25, 40, 63, 80 Rated residual current I Δn ma 30, 100, 300, 500 B: 30,100,300,500; BS: 300, Calibration temperature ºC Number of poles versus modules 2P = 4 mod.; 4P = 4 mod. 4P = 4 mod. 2P = 2 mod.; 4P = 4 mod. Rated voltage Un 2P AC V P AC - - 4P AC V 230/ / Frequency Hz 50/60 50/60 50/60 Maximum service voltage Ubmax V 2P=265/4P=460 4P=440 2P=265/4P=455 Minimum service voltage Ubmin (30 ma) V 2P=160/4P=258 4P=260 2P=160/4P=258 Minimum service voltage Ubmin (100, 300, 500 ma) V 2P=117/4P=205 4P=260 - Minimum voltage for leakage protection Voltage independent Voltage independent Voltage independent Power supply Top/Bottom Top/Bottom Top/Bottom Energy limiting class Rated making and breaking capacity (Im) A 500 (or 10In) (or 10In) Residual making and breaking capacity (IΔ m) A 500 (or 10In) 100A=1000; 125A= (or 10In) Conditional short-circuit capacity (Inc) A fuse 80A glgg fuse 80A glgg fuse 80A glgg Conditional residual short-circuit capacity (IΔ c) A fuse 80A glgg fuse 80A glgg fuse 80A glgg Rated Short-circuit capacity (Icn) A Grid distance (safety distance between two devices) Isolator application yes yes yes Insulation degree Insulation voltage V(DC) Shock voltage (1.2/50μs) kv 6 6 Insulation resistance Mohm Dielectric strength V Shock resistance (in x, y, z direction) (EN/IEC 60077/16.3) 40g 18 shocks 5ms 20g /20ms 40g 18 shocks 5ms Vibration resistance (in x, y, z direction) (EN/IEC ) 1,5g. 30 min, 0..80Hz 5g, 30 min,0 80Hz 1,5g. 30 min, 0..80Hz Endurance electrical at Un, In > mechanical at Un, In > Protection degree (outside/inside electrical enclosure with door) IP20/IP40 IP20/IP40 IP20/IP40 Self extinguish degree (according to UL94) V2 - V2 Tropicalisation (according to EN/IEC , DIN 40046) ºC/RH 55/95% 55/97% 55/95% Pollution degree (acc. EN/IEC ) Operating temperature -25ºC +40ºC -25ºC +40ºC -25ºC +40ºC Storage temperature -25ºC +70ºC -25ºC +70ºC -25ºC +70ºC Terminals capacity Rigid cable min/max (top) mm 2 1,5/50 (1,5/35) 1,5/50 1,5/50 (1,5/35) Flexible cable min/max (top) mm 2 1,5/35 (1,5/25) 1,5/50 1,5/35 (1,5/25) Rigid cable min/max (bottom) mm 2 1,5/50 (1,5/35) 1,5/50 1,5/50 (1,5/35) Flexible cable min/max (bottom) mm 2 1,5/35 (1,5/25) 1,5/50 1,5/35 (1,5/25) Torque Top/Bottom Nm 5/5 3/mrt 5/5 Add-on devices (side add-on) Auxiliary contacts yes yes yes Tele U yes no yes Tele L yes no yes Tele M yes no yes PBS yes no yes Busbars systems Pin yes yes yes Fork yes yes yes # Poles Dimensions (HxDxW) 86x70xW /72 Weight 2P=340 ; 4P=420 4P=500 2P=220 ; 4P=385 Package 1/3 3 2P=1/6; 4P=1/3 Approvals VDE VDE - CE-marking yes yes yes 10

12 GE Industrial Solutions is a first class global supplier of low and medium voltage products including wiring devices, residential and industrial electrical distribution components, automation products, enclosures and switchboards. Demand for the company s products comes from wholesalers, installers, panelboard builders, contractors, OEMs and utilities worldwide. Belgium GE Industrial Belgium Nieuwevaart 51 B-9000 Gent Tel. +32 (0) Finland Kuortaneenkatu 2 FI Helsinki Tel (0) France Paris Nord 2 13, rue de la Perdrix F Roissy CDG Cédex Tel. +33 (0) Germany Robert-Bosch Str. 3 D Hürth-Efferen Tel. +49 (0) 2233/ Hungary GE Hungary Kft. Vaci ut H-1139 Budapest Tel Italy Centro Direzionale Colleoni Via Paracelso 16 Palazzo Andromeda B1 I Agrate Brianza (MB) Tel Netherlands Parallelweg 10 Nl-7482 CA Haaksbergen Tel. +31 (0) Poland GE Power Controls Ul. Towarowa 25A, Ip Warszawa Tel Ul. Leszczyńska Bielsko-Biała Tel Russia 27/8, Electrozavodskaya street Moscow, Tel South Africa Unit 4, 130 Gazelle Avenue Corporate Park Midrand 1685 P.O. Box Wendywood 2144 Tel Spain GE POWER CONTROLS IBÉRICA, S.L. Calle Miño 122 Naves E-F Polígono Industrial Santa Margarita Terrassa (Barcelona) Tel United Arab Emirates Injaz Building, 3rd Floor Dubai Internet City PO Box 11549, Dubai Tel United Kingdom 2 The Arena, Downshire Way Bracknell, Berkshire RG12 1PU Tel. +44 (0) ge.com/ex/industrialsolutions Ref. R/2536/E/EX 1.0 Ed. 05/15 * Trademark of General Electric Company Copyright 2015

Modular DIN-rail devices

Modular DIN-rail devices GE Industrial Solutions Modular DI-rail devices Series K ex.geindustrial.com Modulair DI-rail protection.1 Line protection.2 Selection table of Ms.3 Technical data.4 Short-circuit capacity of Ms.7 Series