Acoustic Unit. made in Germany
|
|
- Leo Sims
- 6 years ago
- Views:
Transcription
1 Acoustic Unit made in Germany
2 More Mobility for the Blind Mobility for blind persons st Intelligent mobile societies in the 21 century include all people. The needs of elderly and handicapped persons find increasing consideration in street traffic. Safe guidance when crossing streets is an absolute necessity. Thanks to technical solutions at traffic lights, blind and visually impaired can also participate safely in social life. RTB's new acoustic unit BLX takes two additional aspects into consideration. It has become clear in the recent past that both are very important. Best noise protection for residents in the vicinity of the traffic lights One who lives in the vicinity of a traffic light has a right to as little unnecessary noise as possible. Through optimal alignment, RTB's acoustic units offer noise protection for residents in a quality which had not been achieved previously. Furthermore, the devices can be regulated depen-ding on ambient noise volume. Very easy installation RTB Acoustic Unit Traffic light manufacturers and municipalities desire the simplest and quickest possible installation of auxiliary devices at traffic lights. A particularly low-priced variant which can be connected to the traffic light pole via a plug connection was developed in close co-operation with practitioners.
3 M O B I L I T Y T E C H N O L O G Y & A P P L I C A T I O N V A R I A N T S E X T E N S I O N S Made in Germany Worldwide, German technology has become the market leader in the area of auxiliary equipment for traffic lights. All those involved can be proud that in the past two decades the developments with the seal of approval Made in Germany have become the international standards. The newest generation of RTB acoustic units with the product description BL X will contribute to a further expansion of German technology in the world. Based on the projected sales figures, the devices can be sold under particularly attractive conditions
4 Technology & Application Norms and guidelines Technical specifications Compliance with relevant norms and guidelines is documented by test reports and certificates from accredited testing agencies, among others the Technical Inspection Association Rhineland, which are formulated on the basis of prototype tests. The product norms define the demands on functional and electrical safety, electromagnetic compatibility and sonic characteristics. Among others, the following product norms have already taken effect; additional specifications can be released at any time. DIN VDE , respectively Hd638 S1 DIN VDE , respectively EN50293:2000 DIN 32981, respectively ISO 23600:2007 ÖNORM V 2100 and V 2101 CEI Norm DIN requires an individual test for all the operational values of the acoustic unit which are relevant to safety. Unacceptable deviations cause a block that can only be reset manually. Thus malfunctions and dangers associated with them are excluded. Signal Tones Pilot tone: 1,2Hz ± 0,2Hz pulse sound with a range of approx. 4.5 m around the pole Walk tone: Signal mixture of harmonic frequencies with the dominant basic frequency of 880Hz ± 50Hz Warning signal/gong: 392Hz warning signal in accordance with DIN and many more. Housing Material polycarbonate available in the colours pine green, black and gravel grey Safety class II in accordance with DIN EN Safety type IP 55 in accordance with DIN EN Voltage variants 230V AC, respectively 160V dim function 110V AC 40VAC or DC, respectively 27V dim function RTB Acoustic Unit
5 M O B I L I T Y T E C H N O L O G Y & A P P L I C A T I O N V A R I A N T S E X T E N S I O N S Internationally and individually applicable At present RTB acoustic units are operating worldwide. Of course, they must be configured to meet national requirements, particularly in regard to local standards for signal tones or national voltage. The automatic adjustment of volume based on the ambient noise level is important everywhere. This also applies to the flexibility of the signal alignment in accordance with street width and building density. Following the successful installation, the remote control offers flexible configuration options (also in English) for the individual adjustment of the signals at the crosswalk. Various special wishes can be achieved via optocoupling input and optocoupling output. This also includes a shut-off at certain times of day or a reduction of volume at night
6 Variants Wide variety of device models GS WS (Walk signal) and extra GS (Guide signal) can be activated Step by step, RTB has expanded and refined the capacity of its products and its product spectrum. With the fourth generation of the acoustic unit, municipalities have access to a variety of possible solutions, which, due to a modular construction technique, can always be combined in new ways and adjusted to individual situations. Standalone devices Standalone devices have their own electronic components and a separate loudspeaker. Standalone devices for the walk tone and the pilot tone are also available. WS and GS from one loudspeaker Kombi devices Kombi devices are convincing due to the costeffective combination of walk tone and pilot tone. With these devices the values for the walk tone and the pilot tone are also freely adjustable. RTB Acoustic Unit
7 M O B I L I T Y T E C H N O L O G Y & A P P L I C A T I O N V A R I A N T S E X T E N S I O N S Standalone device BLX FTM The acoustic unit BLX FTM is a standalone device which produces and transmits walk tones. This tone is defined by the relevant norm of the country or the wish of the customer. It sounds during the pedestrian walk phase and can be heard from the curb until the middle of the crosswalk. The volume is dependent on crosswalk length and building density. Standalone device BLX PT Kombi IV The acoustic unit BLX PT is a standalone device which produces and transmits pilot tones (orientation signals), which indicate the position of the traffic light facility to blind and low vision persons. The tone is emitted around the pole and indicates its position to the visually impaired user. This pilot tone also adjusts its volume to the ambient noise level; its values are freely adjustable. This Kombi device consists of two loudspeakers, one which emits the walk tone and one which emits the pilot tone. The greatest advantage: the device needs only one electronic component. BLX Kombi-S The Kombi S device contains an electronic component and a loudspeaker, which transmits both signals at the crosswalk. Additionally, the pilot tone is reflected behind the pole via a sound reflector. Kombi-200 The Kombi-200 contains the entire electronic unit (including loudspeaker) in a free optical signal housing. This solution is appropriate for traffic light facilities which offer little space for an acoustic unit. Furthermore, in the 200 series there are standalone devices to transmit the walk tone (FTM 200) or the pilot tone (PT 200). BLX Gong The BLX Gong is an acoustical warning signal to indicate dangerous situations. It complies with the requirements of DIN (acoustical signals in public space)
8 Extensions, Combinations net.1: economical retro-fitting net.1 central module Until now several cable wires were needed to install the wide variety of signals (among others walk tone, pilot tone and tactile signal) in the acoustic units at traffic light facilities. This expenditure for existing facilities was often not economical. This problem has now been solved by net.1, RTB's intelligent field bus. Both the power supply for the push button and the acoustic unit as well as transmission of the control signals are conducted via a separate signal transmitting cable between the external unit and the control device which can even be wired in a line topology. Thus expensive excavation work can be avoided. The effective use of the existing ground cable net is thus possible: retrofitting and modernisation of existing facilities become even more attractive. The central module is built into the signal control device. It consists of at least two single boards in European card format: The communication card represents the communication central of the net.1 bus in the external facility. Up to two interface cards each make six connecion groups for push buttons and acoustic units available. Both cards must be integrated together in available 3HE connections in the control device. F-connectors with crimping technology in accordance with DIN make maintenance-friendly contact possible and thus follow established technical standards. RTB Acoustic Unit
9 M O B I L I T Y T E C H N O L O G Y & A P P L I C A T I O N V A R I A N T S E X T E N S I O N S & Accessories net.1 pole module The pole module is a bus participant in the traffic light pole which implements the input and output for the push button and acoustic unit. It consists of an add-on card, which can be ordered as an option for the signal transmitter for blind and visually impaired persons and then will be installed by the manufacturer. In the net.1 pole module there are connections for compatible push buttons which don't have to be connected to a ground cable. net.1 Central Module net.1 cable POLE GROUP 1 POLE GROUP 6 POLE MAST-GRUPPE GROUP 5 POLE GROUP 4 POLE GROUP 3 POLE GROUP 2 T(5,3) T(6,4) T(5,2) T(5,3) T(5,4) T(5,1) T(5,2) T(5,1) T(4,3) T(4,4) T(4,2) T(3,4) T(4,1) T(3,2) T(2,4) T(3,1) T(2,2) T(2,1) T(1,3) T(1,4) T(1,2) T(1,1)
10 Extensions, Combinations Intelligent combination By combining the acoustic unit and the push button when equipping traffic lights specifically for blind and visiually impaired persons, one achieves many advantages. Push Button Type PiT Control of the push button via the acoustic unit In the PiT push button, the control of the pilot tone takes place via the central electronic component in the acoustic unit. The user hears the pilot tone from both the push button and the acoustic unit, which makes it easier to find the traffic light pole. Push Button Type Plus In the Plus push button the vibration element is controlled via the electronic component of the acoustic unit. Through this innovation the costs for equipping a traffic light facility can be further reduced. PiT Plus RTB Acoustic Unit
11 M O B I L I T Y T E C H N O L O G Y & A P P L I C A T I O N V A R I A N T S E X T E N S I O N S & Accessories Easy setting via remote control With the assistance of the infrared remote control, an individual configuration of all devices is possible. The remote control regulates all device parameters such as setting the volume in regard to ambient noise, minimum and maximum volumes, drop-off rate or special solutions such as volume reduction at night. An integrated microphone, which makes the measurement of the current volume possible, makes it easier for the technician to set the parameters. The remote control is also used to configure the net.1. The software BLS.connect is a tool for configuration, documentation and analysis of RTB's acoustical signal transmitter. With this software, one can comfortably plan equipping a traffic light facility with a blindness-specific device in advance on a computer and then document the settings. The transfer of the configuration takes place via the remote control so that it is not necessary to use a laptop on site outdoors. In addition, a diagnosis tool makes it possible for RTB to offer improved and speedy service
12 TRAFFIC LIGHT AUXILIARY EQUIPMENT Push Button, Acoustic Unit RADARSYSTEMS & LASERCLASSIFICATION Dialogue-Display, TOPO PARKING SYSTEMS Parking Meters, Parking Space Sensors ORIENTATION AIDS Ultra-Body-Guard RTB GmbH & Co. KG Schulze-Delitzsch-Weg 10 D Bad Lippspringe Telephone Telefax Internet On the basis of its extensive experience RTB develops, produces and sells innovative solutions for street traffic. In addition to auxiliary equipment for traffic light facilities, radar and laser systems to reduce speed and government certified traffic census systems, our product list includes parking ticket terminals, charging stations and systems for exact parking space management via individual parking space monitoring. RTB emphasizes user-friendliness, quality and design of products and along with this we offer a friendly, understanding and customer-oriented service. In close co-operations with the traffic light manufacturing industry and municipalities, innovative solutions of great value are achieved
PUSH BUTTON & SWARCO I FIRST IN TRAFFIC SOLUTIONS.
PUSH BUTTON & acoustic TRAFFIC signal head SWARCO FUTURIT is one of the world s leading producers of LED-based signalling and lighting technology. Traffic lights, variable message signs and street lights
More informationHeat meter Q heat 5 US
Heat meter Q heat 5 US Ultrasonic heat meter with ultrasonic measurement technology (runtime difference method) with IrDA interface and an interface for retrofitting external modules. Exact measurement
More informationSupercal 531 Multi function Integrator that lives up to Your highest expectations
n Thermal Energy n Flow Metering n Supercal 531 Multi function Integrator that lives up to Your highest expectations Supercal 531 Multi functional integrator with unlimited options The Supercal 531 convinces
More informationProGap Microwave barrier
Operating Instructions EN ProGap Microwave barrier SWR engineering Messtechnik GmbH CONTENTS Page 1. General Comment..................................................................... 3 2. Mounting and
More information1.2 M-Bus (optional) The M-Bus is a galvanically isolated interface for the transmission of meter data (absolute values).
Operating Instructions Communication Interfaces 1 Interfaces and Options 1.1 Optical (infrared) interface For communication with the optical interface an optocoupler and the Device Monitor software are
More informationOperating Instructions / Voltage Tester per IEC with Phase and Polarity Tester and Phase Sequence Indicator
Operating Instructions 3-349-298-15 3/11.09 METRAVOLT 7A Voltage Tester per IEC 61243-3 with Phase and Polarity Tester and Phase Sequence Indicator CAT IV GMC-I Messtechnik GmbH Südwestpark 15 90449 Nürnberg
More informationPrecipitation Monitor ,
THE WORLD OF WEATHER DATA - THE WORLD OF WEATHER DATA - THE WORLD OF WEATHER DATA Instruction for use 021197/11/09 Precipitation Monitor 5.4103.10.000, 5.4103.10.700 ADOLF THIES GmbH & Co. KG Hauptstraße
More information!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! Broadband communication Technical description
Broadband communication Technical description Summary Product description 4 Installable via Plug and Play 5 Perspectives and Chances on the Market 5 Economic and Political Perspectives 6 Unique Selling
More informationDB 112 B. Double Sheet Testing Unit TECHNICAL DESCRIPTION. en / We reserve the right to. make technical changes
en 03-2014/06 50126540 We reserve the right to make technical changes DB 112 B Double Sheet Testing Unit TECHNICAL DESCRIPTION 2014 Leuze electronic GmbH + Co. KG In der Braike 1 D-73277 Owen / Germany
More informationDB 12 B. Double Sheet Testing Unit. Phone: Fax: Web: -
DB 12 B Double Sheet Testing Unit GB 03-08/08 50104956 Table of contents 1 General information... 2 1.1 Explanation of symbols... 2 1.2 Declaration of conformity... 2 2 Safety notices... 3 2.1 Safety standards...
More informationEasyclickpro radio-frequency system: intelligent and energy-efficient
Easyclickpro radio-frequency system: intelligent and energy-efficient The Easyclickpro radio-frequency system. Unmatched versatility Easyclickpro & EnOcean 4 Easyclickpro radio-frequency system 6 Easyclickpro
More information10/2 Product overview. 10/3 4AC3 0, 4AC3 1 bell transformers. 10/5 4AC AC3 6 transformers for permanent loads. 10/8 4AC2 4 power supply units
BETA Switching Transformers, Bells and Socket Outlets /2 Product overview /3 4AC3 0, 4AC3 1 bell transformers /5 4AC3 4... 4AC3 transformers for permanent loads /8 4AC2 4 power supply units / 7LQ2 2 bells
More informationThe universal input/output device is a DIN rail mounted device. It is connected to the EIB via a bus connecting terminal.
, GH Q631 0026 R0111 SK 0097 B97 The universal input/output device is a DIN rail mounted device. It is connected to the EIB via a bus connecting terminal. The device has 32 freely programmable inputs/outputs,
More informationPOINTAX 6000L2 Point Recorder
GOSSEN METRAWATT CAMILLE BAUER Special Features 6 measuring channels Last printed point visible from front Electrically isolated, earth-free measuring channels Process signals ranging from 0/4... 20 ma,
More informationDigital Function Generator
Digital Function Generator 13654-99 PHYWE Systeme GmbH & Co. KG Robert-Bosch-Breite 10 37079 Göttingen Germany Tel. +49 (0) 551 604-0 Fax +49 (0) 551 604-107 E-mail info@phywe.de Operating Instructions
More informationMoving Test - MT3000
Moving Test - MT3000 Three-Phase Portable Test System Keep ahead with Modular Design The Modular Concept The MT3000 is based on a real modular design concept to provide the greatest possible flexibility
More informationArtisan Technology Group is your source for quality new and certified-used/pre-owned equipment
Artisan Technology Group is your source for quality new and certified-used/pre-owned equipment FAST SHIPPING AND DELIVERY TENS OF THOUSANDS OF IN-STOCK ITEMS EQUIPMENT DEMOS HUNDREDS OF MANUFACTURERS SUPPORTED
More informationRADIOBAND V3 Programming & Installation Manual
RADIOBAND V3 Programming & Installation Manual Radioband V3 User s Manual Introduction The RadioBand system is designed for Automatic Gates, Commercial and Domestic door applications where a safety edge
More informationCOD GB / 1.0 RBAND/UMS - RBAND/CSM
INTRODUCTION DESCRIPTION The RadioBand system is designed of Industrial, Commercial and Domestic door and gate applications where a safety edge is used. The system provides a wireless system replacing
More informationPrecipition Sensor with analogue Intensity Output ,
THE WORLD OF WEATHER DATA - THE WORLD OF WEATHER DATA - THE WORLD OF WEATHER DATA Instruction for use 021335/11/09 Precipition Sensor with analogue Intensity Output 5.4103.20.041, 5.4103.20.741 ADOLF THIES
More informationPHASED OUT. LED Driver Compact fixed output. Driver LCI 10W 150mA 400mA TOP C TOP series. Product description
Product description EL Fixed output built-in LED Driver Constant current LED Driver Output current settable 15 4 ma Max. output power W Nominal life-time up to, h For luminaires of protection class I and
More informationEXPERT-LINE. KOBO-pH. Transmitter for ph-value and ORP Model APM-X
KOBO-pH Transmitter for ph-value and ORP Model APM-X measuring monitoring analysing EXPERT-LINE Measuring range: ph value: 0 to 14 ORP: -1500 to +1500 mv (0-100%) For general-purpose use with: Analogue
More informationProduct and Applications Description
Product and pplications Description Diagram The transmitter 230V wave UP 110 (Diagram ) is a flushmounted device with radio communication for the wireless operation of room functions. It is possible to
More informationOperating Instructions. Combination sensor
Operating Instructions 1. Safety warnings Attention: Electrical equipment must be installed and fitted by qualified electricians only and in strict observance of the relevant accident prevention regulations.
More informationFluke 1740 Series. Three-Phase Power Quality Loggers Memobox. Assess power quality and conduct long-term studies with ease
Fluke 1740 Series Three-Phase Power Quality Loggers Memobox Technical Data Assess power quality and conduct long-term studies with ease Compact and rugged, the Fluke 1740 Series three-phase power quality
More informationPerformance Specification For Tactile Equipment for use at Pedestrian Crossings
traffic systems and signing TR 2508 Issue A July 2005 Performance Specification For Tactile Equipment for use at Crown Copyright 2005 First published 2005 Printed and published by the Highways Agency (This
More informationAbsolute Encoders Multiturn
Absolute Encoders Multiturn Functional Safety, optical The absolute multiturn encoders Sendix 5863 SIL and 5883 SIL are perfectly suited for use in safety-related applications up to SIL3 according to DIN
More informationM-0418 REV:0
1 of 5 This specification sets forth the minimum requirements for purchase and installation of an aboveground Radar Detection Device (RDD) system for a real-time, stop bar vehicle-detection system that
More informationKnow all procedures and administrative and technical mechanisms related to the activity of approval of telecommunications terminal in CERT.
APPROVAL OF TERMINALS TELECOMMUNICATIONS: PROCEDURES, TESTS AND MEASUREMENTS May June 2016 Objective Know all procedures and administrative and technical mechanisms related to the activity of approval
More informationDistance sensors. System description. Distance measurement using triangulation
Distance sensors System description Distance measurement using triangulation The measurement principle of optical triangulation is suitable for the precise determination of distances at close range. With
More informationspy pig Tracking systems
spy pig Tracking systems PIPELINE INSPECTION COMPANY Spy pig Transmitters For the most reliable signal available, the SPY Pig Transmitter uses low frequency signals to effectively and consistently penetrate
More informationTime Switch, 2-channel, MDRC SW/S 2.5, GH Q R0001
, GH Q605 0062 R0001 The 2-fold week time switch is a DIN rail mounted device with a width of two modules for insertion in the distribution board. It is connected to the EIB via a bus connecting terminal.
More informationProduct Information. Page 1 of 10
Product Information RT-1000.C Page 1 of 10 Edited by: RHOTHETA Elektronik GmbH Kemmelpark Dr.-Ingeborg-Haeckel-Str.1 82418 Murnau Germany : +49 8841 / 4879-0 : +49 8841 / 4879-14 Homepage: www.rhotheta.de
More informationShort operating instructions
gottardo LED office floor lamp series I Short operating instructions Visit us online too. gottardo-led.swiss Product film on Youtube Operating instructions gottardo series I Version: 1.0/20180406/SN SW:20170224
More informationTechnical data. Your advantages
Technical data Nominal torque: 50 Nm to 2.000 Nm, bidirectional Rotational speed: 10.000 rpm Accuracy: ±0,2 % Temperature range: -40 C to +85 C Protection class: IP50, IP65 Output signals: 0-10 V/4-20
More informationLevel Switch NRS 2-50 NRS Original Installation Instructions English
Level Switch NRS 2-50 NRS 2-51 EN English Original Installation Instructions 819179-03 1 Contents Important Notes Page Usage for the intended purpose...4 Function...4 Safety note...4 Directives and Standards
More informationPressure Transmitter SIL
Pressure Transmitter SI Characteristics - TRANSDUCER - Pressure: Range: Output: Accuracy: Temperature of medium: Material enclosure: Pressure connection: Electrical connection: Protection: relative / absolute
More informationspy pig Tracking systems
spy pig Tracking systems Spy pig Transmitters For the most reliable signal available, the SPY Pig Transmitter uses low frequency signals to effectively and consistently penetrate a steel pipe wall. We
More informationTR20A120 RE / 02.2012 DE EN FR NL IT ES PT Anleitung für Montage und Betrieb Funk-Codetaster FCT 10 BiSecur Instructions for fitting and operating Radio code switch FCT 10 BiSecur Instructions de montage
More informationAbsolute Encoders Singleturn
The absolute singleturn encoders Sendix 5853 SIL and 5873 SIL are perfectly suited for use in safety-related applications up to SIL3 according to DIN EN ISO 6800-5- or PLe to DIN EN ISO 3849. The extra
More informationESR. The Dynamic Solution. Main Characteristics. Applications. ESR Pollmeier GmbH
Modular Multi-Axis Servo System for Any Type of Servo Motors Servo Power Modules for Direct Mains Connection Motion Control Modules for Coordinated Axis Motion MidiDrive C (3 400/480 V AC) Servo Power
More informationNew Products Catalogue 2009 Safety Relays ESR5
www.moeller.net New Products Catalogue 2009 Safety Relays ESR5 u Description Functional safety on machines monitoring with safety relays ESR5 Emergency-stop circuits Monitoring of movable guards with guard
More informationPRODUCT BROCHURE HP-L Laser Scanner for ROMER Absolute Arm
PRODUCT BROCHURE HP-L-20.8 Laser Scanner for ROMER Absolute Arm 2 HP-L-20.8 LASER SCANNER FOR ROMER ABSOLUTE ARM FAST ACCURATE VERSATILE The new laser scanner by Hexagon Metrology Designed for ROMER Absolute
More informationKNX TH65-AP. Thermo-Hygrometer. Installation and Adjustment. Item number 70184
EN KNX TH65-AP Thermo-Hygrometer Item number 70184 Installation and Adjustment 1 Content 1. Description... 3 1.1. Technical specifications... 3 2. Installation and commissioning... 4 2.1. Installation
More informationGESTRA Steam Systems LRS English. Installation & Operating Instructions Conductivity Switch LRS 1-50
GESTRA Steam Systems LRS 1-50 EN English Installation & Operating Instructions 819223-02 Conductivity Switch LRS 1-50 Contents Important notes Page Usage for the intended purpose...4 Function...4 Safety
More informationDIGITAL LASER DISTANCE METER
DIGITAL LASER DISTANCE METER LD05-A10GF with glass-fiber coupled remote optical head The RIEGL LD05-A10GF is a multi-purpose laser distance meter based on precise timeof-flight laser range measurement
More informationDistance sensors. System description. Distance measurement using triangulation
Distance sensors System description Distance measurement using triangulation The measurement principle of optical triangulation is suitable for the precise determination of distances at close range. With
More informationOrganisation Internationale de Métrologie Légale
Organisation Internationale de Métrologie Légale INTERNATIONAL RECOMMENDATION Sound level meters Sonomètres OIML R 58 Edition 1998 (E) CONTENTS Foreword... 3 1 Scope... 4 2 Construction and maximum permissible
More informationPHASED OUT. LED Driver Compact fixed output. Driver LCI 20W 350mA 900mA TOP C TOP series
EL Product description Fixed output built-in LED Driver Constant current LED Driver Output current settable 30 900 ma Max. output power 20 W Nominal life-time up to 100,000 h For luminaires of protection
More informationR&S RSC Step Attenuator Specifications
R&S RSC Step Attenuator Specifications Data Sheet Version 05.00 CONTENTS Definitions... 3 Specifications... 4 Step attenuator, 139 db, 1 db steps, DC to 6 GHz (models.03 and.13)... 4 Step attenuator, 139.9
More informationElectronic Thermostat TE-1 Version according to EN
JUMO GmbH & Co. KG Delivery address:mackenrodtstraße 14, 3639 Fulda, Germany Postal address: 3635 Fulda, Germany Phone: +49 661 63- Fax: +49 661 63-67 e-mail: mail@jumo.net Internet: www.jumo.net JUMO
More informationOTTO NoizeBarrierTM TAC
OTTO NoizeBarrierTM TAC Advanced Communications Headset for Today s Modern Warfighter Proud United States Manufacturing Company Since 1961 OTTO NoizeBarrier TAC OTTO NoizeBarrier TM TAC Communications
More informationFAG Detector II the mobile among data collectors. Technical Product Information
FAG II the mobile among data collectors Technical Product Information Application Condition-based maintenance Principle Application The FAG II is a vibration measuring device and data collector rolled
More informationOriginal operating instructions Fail-safe inductive sensor GG507S / / 2013
Original operating instructions Fail-safe inductive sensor GG507S 80005283 / 00 05 / 2013 Contents 1 Preliminary note...3 1.1 Explanation of symbols...3 2 Safety instructions...4 2.1 Safety-related requirements
More informationin one housing (3). The light beam is reflected by a reflector (4). The objects are detected by interruption of the light beam.
This info card serves as a supplement to the main position sensors catalogue and to the individual data sheets. For further information and contact addresses please visit our homepage at www.ifm. com.
More informationSafety Light Curtain Orion1 Extended
Safety Light Curtain Orion1 Extended pprovals: pplication: For finger and hand detection When the light guard should be close to the hazardous zone When muting or blanking are necessary When several devices
More informationSITRANS F flowmeters SITRANS F US. Transmitter FUS060. Overview
Overview Function Displays and keypad Operation of the SITRANS FUS060 transmitter can be carried out using: Keypad and display unit HART communicator PC/laptop and SIMATIC PDM software via HART communication
More informationMETRATESTER 5+ Tester for DIN VDE /6.15
3-348-817-03 15/6.15 Applications Electrical safety testing of electrical equipment: per DIN VDE 0701-0702: 2008 by means of measurement of: Protective conductor resistance Insulation resistance Protective
More informationINTERACT3. User manual Wireless adaptor plug switch IP 20/IP 44, wireless adaptor plug dimmer German/English
User manual Wireless adaptor plug switch IP 20/IP 44, wireless adaptor plug dimmer German/English 53916.00.001.01 Wireless adaptor plug switch IP 20 (Model ZW ZS 3500) 53917.00.001.01 Wireless adaptor
More informationLaser contrast scanner. Dimensioned drawing
Laser contrast scanner Dimensioned drawing en 06-2016/08 50110624-03 60mm 10-30 V DC Red light laser transmitter Various teach variants Small light spot adjustment via EasyTune Level adaptation for glossy
More informationDigital Input Module 24 V Ex n Inputs, 16 Channels Series 9471
> 16 channels for active 0 / 24 V signals > Zone 2 / Division 2 version for connection of circuits acc. to Ex nl, Ex na, Nonincendive and Non-Ex > Galvanic separation between inputs and system > Two channels
More informationR&S ZVT Vector Network Analyzer Specifications
R&S ZVT Vector Network Analyzer Specifications Test & Measurement Data Sheet 08.00 CONTENTS Definitions... 3 Specifications... 4 Measurement range...4 Measurement speed...5 Measurement accuracy...6 Effective
More informationOPTITEMP TT 20 Technical Datasheet
OPTITEMP TT 20 Technical Datasheet Analog PC-programmable two-wire transmitters for Pt100 Efficient PC-configuration without recalibration Very stable output Very fast response time The documentation is
More informationAN0509 swarm API Country Settings
1.0 NA-15-0356-0002-1.0 Version:1.0 Author: MLA Document Information Document Title: Document Version: 1.0 Current Date: 2015-04-16 Print Date: 2015-04-16 Document ID: Document Author: Disclaimer NA-15-0356-0002-1.0
More informationPHASED OUT. LED Driver Compact fixed output. Driver LCI 10W 350mA 900mA TOP C TOP series
EL Product description Fixed output built-in LED Driver Constant current LED Driver Output current settable 35 9 ma Max. output power W Nominal life-time up to, h For luminaires of protection class I and
More informationPower distribution system SVS25
Power distribution system SVS Description The new power distribution system type SVS meets all requirements of the automation technology with regard to reliably overcurrent protection and optimised current
More informationDRS61: Incremental encoders, number of lines and zero pulse width freely programmable DRS60: Incremental Encoders with Zero-Pulse-Teach
NEW DRS: Incremental encoders, number of lines and zero pulse width freely programmable DRS: s with Zero-Pulse-Teach Further highlights of this generation of encoders: Simple zero-pulse-teach by pressing
More informationFluke 1740 Series. Three-Phase Power Quality Loggers Memobox. Assess power quality and conduct long-term studies with ease
Fluke 1740 Series Three-Phase Power Quality Loggers Memobox Technical Data Assess power quality and conduct long-term studies with ease Compact and rugged, the Fluke 1740 Series three-phase power quality
More informationULTRASONIC LEVEL METERS ULM 53
ULTRASONIC LEVEL METERS ULM 53 For continuous level measurement of liquids (even if polluted), mash and paste materials in open or closed vessels, sumps, open channels, etc. Configuration and adjustment
More informationElectrical devices may only be mounted and connected by electrically skilled persons.
Order No. : 2126 00 Operating instructions 1 Safety instructions Electrical devices may only be mounted and connected by electrically skilled persons. Serious injuries, fire or property damage possible.
More informationanimeo KNX 4 DCE Motor Controller WM/DRM V AC Instructions
somfy.com animeo KNX 4 DCE Motor Controller WM/DRM 220-240 V AC Instructions Ref. 1860127 2008-2012, SOMFY SAS. ALL RIGHTS RESERVED. REF. 5055608B - 2012/08/31 Table of contents Introduction...3 1 2 3
More informationRadio to radio repeater. airrepeater INSTRUCTIONS MANUAL M A
Radio to radio repeater airrepeater INSTRUCTIONS MANUAL M98250601-03-16A Pag 2 of 9 Instructions manual Safety Warnings & Symbols DANGER Death, serious injury, or fire hazard could result from improper
More informationOperating instructions Fail-safe delay timer AZS About this document. Content
8 Appendix 8.1 Wiring example...4 8.2 Integral System Diagnostics (ISD)....5 9 EU Declaration of conformity Operating instructions.............pages 1 to 6 Original x.000 / 11.2017 / v.a. - 101126753-
More informationOptical laser distance sensors. Dimensioned drawing
Dimensioned drawing en 02-2012/11 50118552 50 100mm 18-30 V DC We reserve the right to make changes DS_ODSL9L100_en_50118552.fm High resolution 0.01mm Reflection-independent distance information Highly
More informationSECTION GPS WIRELESS CLOCK SYSTEMS
PART 1 GENERAL 1.1 SECTION INCLUDES A. G.P.S. Receiver B. Primary Transmitter C. Satellite Transmitter D. Analog Clocks E. Digital Clocks 1.2 REGULATORY REQUIREMENTS SECTION 27 53 13 GPS WIRELESS CLOCK
More informationWind Transmitter - with frequency output xx.xxx
THE WORLD OF WEATHER DATA - THE WORLD OF WEATHER DATA - THE WORLD OF WEATHER DATA Instruction for Use 021531/11/09 Wind Transmitter - with frequency output 4.3303.xx.xxx ADOLF THIES GmbH & Co. KG Hauptstraße
More informationPSD-S AE SM DB/1
Siren element, 8 tones, 24 V AC/DC, max. 100 db(a) Data sheet 7944_en_02 PHOENIX CTACT 2015-05-04 1 Description This audible signal element is designed as a component of a modular signal tower. According
More informationDigital Anemometer
THE WORLD OF WEATHER DATA - THE WORLD OF WEATHER DATA - THE WORLD OF WEATHER DATA Instruction for Use 021404/07/04 Digital Anemometer 4.3406.00.000 ADOLF THIES GmbH & Co. KG Hauptstraße 76 37083 Göttingen
More informationSiemens AG Allows easy and consistent configuration with one series of overload relays (for small to large loads)
Overview Features Benefits 3RU11 3RB20/3RB21 3RB22/3RB23 Sizes Are coordinated with the dimensions, connections S00...S3 S00... S12 S00... S12 and technical characteristics of the other devices in the
More informationTMP40. User Manual.
TMP40 User Manual www.audac.eu ADDITIONAL INFORMATION This manual is put together with much care, and is as complete as could be on the publication date. However, updates on the specifications, functionality
More informationitemp PA TMT184 Technical information
Technical information itemp PA TMT184 Temperature head transmitter with PROFIBUS-PA interface. Supply and digital communication using PROFIBUS-PA, for installation in a Form B sensor head. Features and
More informationPharma-Temperature Sensor M12 hygienic
SENSORS FOR FOOD AND BIOPHARMA. Product Information TFP-42P, -52P, -62P, -162P, -182P PHARMA Pharma-Temperature Sensor M12 hygienic Application/Specified usage Temperature measurement in pipes DN15...DN80
More information200W 500W, Air Cooled QUBE Fiber Lasers
Technical Specification 200W 500W, Air Cooled QUBE Fiber Lasers CONTENTS 1.1 SCOPE 2 1.2 OPTICAL SPECIFICATION 2 1.3 BEAM DELIVERY FIBER SPECIFICATION 3 1.4 ALIGNMENT LASER 4 1.5 POWER DISTRIBUTION 4 1.6
More informationInfocal 9 Energy calculator
Infocal 9 Energy calculator Description/Application MID examination certificate no.: LT-1621-MI004-028 The INFOCAL 9 is an energy calculator, e.g. for combination with or SonoSensor 30. It is especially
More informationOPTISONIC Ultrasonic flowmeter for liquids in all industrial applications
OPTISONIC 3400 Ultrasonic flowmeter for liquids in all industrial applications Measurement of conductive and non-conductive, low and high viscous liquids, from -200 to +250 C / -328 to +482 F medium temperature
More informationMETRISO. Analog Insulation, Low Resistance and Voltage Measurement Instrument /9.14
3-349-813-3 1/9.14 Insulation measurement per EN 61557-2/VDE 413, part 2 Test voltages: 5 V, 1 V, 25 V, 5 V and 1 V Analog display of measured values and limit values Intelligent filter precise and measurement-dependent
More informationRota-Sonde DC4500. Smart display with Signal level. Easy alignment with Laser Line. Design for the most difficult applications
Scanning HOT METAL DETECTOR Rota-Sonde DC4500 Smart display with Signal level Easy alignment with Laser Line Design for the most difficult applications Very High Sensitivity 360 F Lt 1445 1 Applications
More informationRevolutionizing 2D measurement. Maximizing longevity. Challenging expectations. R2100 Multi-Ray LED Scanner
Revolutionizing 2D measurement. Maximizing longevity. Challenging expectations. R2100 Multi-Ray LED Scanner A Distance Ahead A Distance Ahead: Your Crucial Edge in the Market The new generation of distancebased
More informationCable Identifier Reliable cable selection for energised and de-energised cables
Reliable cable selection for energised and de-energised cables Inexpensive cable selection system Easy to operate Safe to handle Very small DESCRIPTION Clear identification of a cable before it is cut
More informationPhotoelectric switches WLL 170(T), fibre-optic cables LL 3: flexible solutions with fibre-optic cable systems
WLL 0(T) Photoelectric switches Photoelectric switches with fibre-optic cable Proximity mode Photoelectric switches with fibre-optic cable Through-beam mode Photoelectric switches WLL 0(T), fibre-optic
More informationXR1 Rotor Earth Fault Relay. (May 2007) Manual XR1 (Revision New)
XR1 Rotor Earth Fault Relay (May 2007) Manual XR1 (Revision New) Woodward Manual XR1 GB Woodward Governor Company reserves the right to update any portion of this publication at any time. Information provided
More informationThis data sheet is only valid in association with the IL SYS INST UM E user manual.
Inline counter terminal, version for extreme conditions, 1 counter input, 1 control input, 1 output, 24 V DC, 500 ma Data sheet 106148_en_03 PHOENIX CONTACT 2015-11-04 1 Description The terminal is designed
More informationOperating Instructions GEMINI R
Operating Instructions GEMINI R 060999-104 02.09.2011 General Notes For your safety Documentation Please familiarise yourself with these operating instructions and the safety information it contains before
More informationDocumentation. Measurement and Control. Type: ELT-GP2
Documentation Measurement and Control Type: ELT-GP2 05.01.2018 K. Folkerts Content 1. Data sheet 2. Installation instructions 3. Declarations of conformity 05.01.2018 K. Folkerts 1 05.01.2018 K. Folkerts
More informationTemperature Sensor G1/2" Standard
SENSORS FOR FOOD AND BIOPHARMA. Product Information TFP-40, -50, -60, -160, -180 FOOD Temperature Sensor G1/2" Standard Application / Specified Usage Temperature measurement in vessels and pipes No product
More informationMelt pressure Transmitter GREENLINE Type DTAI with Temperature element
Melt pressure Transmitter GREENLINE Type DTAI with Temperature element Operation and Maintenance Manual English Mercury free NaK free Seite 1 / 9 Contents: 1. Introduction 2. Operating range and field
More informationW27-3: The all-rounder: robust, powerful, very wide range of applications
W- Photoelectric switches BGS Photoelectric proximity switches Photoelectric reflex switches Through-beam photoelectric switches W-: The all-rounder: robust, powerful, very wide range of applications speed
More informationClass II. Sensing method Appearance Connection Sensing distance Output function Model method NPN output PNP output mm.
Distance-settable Photoelectric Sensor FC-AL Distance-settable Photoelectric Sensor with Background Suppression and Visible Laser Beam Reliable background suppression detection, even of shiny objects Detection
More informationSystems. Dynamic Test. Electrodynamic Vibration Test Systems
Systems 6-20 kn air cooled Electrodynamic Vibration Test Systems SW2-6200APP ( 6KN) SW2-6230APP ( 6KN) SW2-1240APP (10KN) SW2-2320APP (20KN) SW2-2LS3-340APP (20KN) Dynamic Test Technical subject to changes
More informationLow Frequency. Precision test equipment for safety in electric and magnetic fields
Low Frequency Precision test equipment for safety in electric and magnetic fields Your One-Stop Shop for Safety in Electromagnetic Fields Narda Safety Test Solutions device technologies highly simplify
More information