Comparators and Reference Circuits ADCMP350/ADCMP354/ADCMP356

Size: px
Start display at page:

Download "Comparators and Reference Circuits ADCMP350/ADCMP354/ADCMP356"

Transcription

1 Data Sheet Comparators and Reference Circuits ADCMP35/ADCMP354/ADCMP356 FEATURES Comparators with.6 V on-chip references Output stages Open-drain active low (ADCMP35) Open-drain active high (ADCMP354) Push-pull active high (ADCMP356) High voltage (up to V) tolerance on VIN and open-drain output pins Low power consumption: 1 µa 1 na input bias current 15 mv hysteresis 5 µs propagation delay Specified over 4 C to +15 C temperature range 4-lead SC7 package APPLICATIONS Voltage detectors Microprocessor systems Computers Battery monitors Intelligent instruments Portable equipment FUNCTIONAL BLOCK DIAGRAMS ADCMP35 REF V IN V CC GND OUT (OD) Figure 1. ADCMP35 Functional Block Diagram V CC ADCMP354/ADCMP356 V IN OUT (OD/PP) REF GND Figure. ADCMP354/ADCMP356 Functional Block Diagram GENERAL DESCRIPTION The ADCMP35/ADCMP354/ADCMP356 are comparator and reference circuits suitable for use in general-purpose applications. The high voltage input and output structures allow voltages of up to V on the input of all devices and the output of the opendrain devices. High performance over the 4 C to +15 C temperature range makes them suitable for use in automotive and other thermally harsh applications, while low power consumption and space-efficient SC7 packaging make them ideal for battery-powered portable equipment. Table 1. Selection Table Reference Part No. Voltage (V) Input Connection Output ADCMP35.6 Inverting Open-drain ADCMP354.6 Noninverting Open-drain ADCMP356.6 Noninverting Push-pull Rev. E Document Feedback Information furnished by Analog Devices is believed to be accurate and reliable. However, no responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other rights of third parties that may result from its use. Specifications subject to change without notice. No license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Trademarks and registered trademarks are the property of their respective owners. One Technology Way, P.O. Box 916, Norwood, MA 6-916, U.S.A. Tel: Analog Devices, Inc. All rights reserved. Technical Support

2 ADCMP35/ADCMP354/ADCMP356 TABLE OF CONTENTS Features... 1 Applications... 1 Functional Block Diagrams... 1 General Description... 1 Revision History... Specifications... 3 Absolute Maximum Ratings... 4 ESD Caution... 4 Data Sheet Pin Configuration and Function Descriptions...5 Typical Performance Characteristics...6 Applications Information...9 Adding Hysteresis...9 Voltage Detector...9 Outline Dimensions... 1 Ordering Guide... 1 REVISION HISTORY 5/18 Rev. D to Rev. E Changes to Figure and Figure Changes to Ordering Guide /16 Rev. C to Rev. D Changes to Figure 13 Caption and Figure 14 Caption... 7 Updated Outline Dimensions /15 Rev. B to Rev. C Changes to Adding Hysteresis Section, Figure, and Figure Changes to Ordering Guide /11 Rev. A to Rev. B Deleted ADCMP35... Universal Changes to Adding Hysteresis Section, Figure, and Figure /9 Rev. to Rev. A Changes to Ordering Guide /4 Revision : Initial Version Rev. E Page of 1

3 Data Sheet ADCMP35/ADCMP354/ADCMP356 SPECIFICATIONS VCC = full operating range, TA = 4 C to +15 C, unless otherwise noted. Table. Parameter Min Typ Max Unit Test Conditions/Comments SUPPLY Operating Voltage Range VCC V VIN V Supply Current 1 15 µa VIN THRESHOLD VCC = 3.3 V Rising V TA = 4 C to +85 C V TA = 4 C to +15 C Falling V TA = 4 C to +85 C V TA = 4 C to +15 C INPUT BIAS CURRENT 1 na VIN =.6 V 17 µa VIN = V THRESHOLD TEMPERATURE COEFFICIENT 3 ppm/ C VIN TO OUT DELAY 5 µs VIN = VTH to (VTH 1 mv) OUT VOLTAGE Low.4 V VIN < VTH minimum, ISINK = 1. ma High.8 VCC V VIN > VTH maximum, ISOURCE = 5 µa, push-pull only OUTPUT TIME COUT = 15 pf Rise 3 ns Fall 45 ns OUTPUT LEAKAGE CURRENT 1 µa OUT = V, open-drain only Rev. E Page 3 of 1

4 ADCMP35/ADCMP354/ADCMP356 ABSOLUTE MAXIMUM RATINGS TA = 5 C, unless otherwise noted. Table 3. Parameter Rating VCC.3 V to +6 V VIN.3 V to +5 V OUT (Open-Drain).3 V to +5 V OUT (Push-Pull).3 V to (VCC +.3 V) Operating Temperature Range 4 C to +15 C Storage Temperature Range 65 C to +15 C θja Thermal Impedance 146 C/W Lead Temperature Soldering (1 sec) 3 C Vapor Phase (6 sec) 15 C Infrared (15 sec) C Data Sheet Stresses at or above those listed under Absolute Maximum Ratings may cause permanent damage to the product. This is a stress rating only; functional operation of the product at these or any other conditions above those indicated in the operational section of this specification is not implied. Operation beyond the maximum operating conditions for extended periods may affect product reliability. ESD CAUTION Rev. E Page 4 of 1

5 Data Sheet ADCMP35/ADCMP354/ADCMP356 PIN CONFIGURATION AND FUNCTION DESCRIPTIONS V IN 1 GND ADCMP35/ ADCMP354/ ADCMP V CC OUT 511- Figure 3. Pin Configuration Table 4. Pin Function Descriptions Pin No. Mnemonic Description 1 VIN Monitors Analog Input Voltage. Connected to inverting or noninverting input depending on the model number. GND Ground. 3 OUT Digital Output. Open-drain or push-pull options depending on the model number. 4 VCC Power Supply. Rev. E Page 5 of 1

6 ADCMP35/ADCMP354/ADCMP356 Data Sheet TYPICAL PERFORMANCE CHARACTERISTICS I CC (µa) T A +15 C T A +5 C T A +85 C T A 4 C SUPPLY CURRENT (µa) V CC (V) V IN (V) Figure 4. ICC vs. VCC over Temperature Figure 7. Supply Current vs. Input Voltage (VIN) T A = +5 C T A = +85 C V TRIP (mv) V TRIP TRIP RISING V TRIP TRIP FALLING IN LEAKAGE (µa) T A = +15 C T A = 4 C TEMPERATURE ( C) Figure 5. VIN Trip Threshold (VTRIP) vs. Temperature (VCC = 3.3 V) V IN (V) Figure 8. Input (IN) Leakage vs. VIN HYSTERESIS.8.7 HYSTERESIS (mv) T A = 5 C TEMPERATURE ( C) Figure 6. VIN Trip Hysteresis vs. Temperature V IN (V) Figure 9. VIN Leakage Current vs. VIN (VCC = 3.8 V) Rev. E Page 6 of 1

7 Data Sheet ADCMP35/ADCMP354/ADCMP T A = +15 C 1 T A = +5 C IN LEAKAGE (µa) T A = +85 C T A = +5 C T A = 4 C OUTPUT VOLTAGE (mv) 1 1 T A = +15 C T A = +85 C T A = 4 C V CC (V) OUTPUT SINK CURRENT (ma) Figure 1. Input (IN) Leakage vs. VCC (VIN = V) Figure 13. Output Voltage vs. Output Sink Current V TRIP (mv) V TRIP RISING V TRIP FALLING OUTPUT LOW VOLTAGE (mv) V CC (V) SUPPLY VOLTAGE (V) Figure 11. VTRIP vs. VCC Figure 14. Output Low Voltage vs. Supply Voltage (ISINK = 5 µa) HYSTERESIS (mv) HYSTERESIS FALL TIME (ns) RISE TIME 4 4 FALL TIME V CC (V) SUPPLY VOLTAGE (V) Figure 1. VIN Trip Hysteresis vs. VCC Figure 15. Fall Time vs. Supply Voltage Rev. E Page 7 of 1

8 ADCMP35/ADCMP354/ADCMP356 Data Sheet SHORT-CIRCUIT SINK CURRENT (ma) SUPPLY VOLTAGE (V) Figure 16. Short-Circuit Sink Current vs. Supply Voltage (VCC = 3.3 V, Push-Pull Only) CH1 = VIN CH = VOUT CH1 mv/div CH 1.V/DIV TIMEBASE: 1µs/DIV Figure 18. Propagation Delay Timing, 1 mv Overdrive CH1 = VIN PROPAGATION DELAY (µs) t PLH t PHL CH = VOUT INPUT OVERDRIVE (mv) Figure 17. Propagation Delay vs. Input Overdrive (VCC = 3.3 V, Push-Pull Only) CH1 1mV/DIV CH 1.V/DIV TIMEBASE: 1µs/DIV Figure 19. Propagation Delay Timing, 1 mv Overdrive Rev. E Page 8 of 1

9 Data Sheet APPLICATIONS INFORMATION ADDING HYSTERESIS To prevent oscillations at the output caused by noise or slowly moving signals passing the switching threshold, positive feedback can be used to add hysteresis to the noninverting parts (ADCMP354 and ADCMP356). For the noninverting configuration shown in Figure, two resistors are used to create different switching thresholds, depending on whether the input signal is increasing or decreasing in magnitude. When the input voltage is increasing, the threshold is above VREF, and when it is decreasing, the threshold is below VREF. The upper input threshold level is given by V IN_HI ( + ) VREF R1 R = R ADCMP35/ADCMP354/ADCMP356 VOLTAGE DETECTOR The ADCMP35/ADCMP354/ADCMP356 can be used to monitor voltages, such as battery monitoring or threshold detectors. Using a resistor divider at the input to select the appropriate trip voltage, the comparator can be configured to give a logic output when the input passes that threshold. Figure 1 shows the typical configuration of the ADCMP354 for monitoring a supply to indicate that the voltage is above a certain level. V IN R1 ADCMP354 V CC = 5V OUT R PULLUP where VREF =.6 V, assuming RLOAD >> R, RPULLUP The lower input threshold level is given by V IN_LO ( ) VREF R1 + R + RPULLUP VCC R1 = R + R PULLUP The hysteresis is the difference between these voltage levels and is given by V HYS ( ) ( + ) V R1 R1 V V = R R + R REF REF CC PULLUP R V REF =.6V Figure 1. Voltage Detector Application V CC = 5V ADCMP354 R PULLUP V IN R1 V REF =.6V OUT R LOAD R 511- Figure. Noninverting Comparator Configuration with Added Hysteresis Rev. E Page 9 of 1

10 ADCMP35/ADCMP354/ADCMP356 Data Sheet OUTLINE DIMENSIONS PIN 1 INDICATOR BSC BSC BSC MAX COPLANARITY *.7.5 SEATING PLANE.18.1 *PACKAGE OUTLINE CORRESPONDS IN FULL TO EIAJ SC8 EXCEPT FOR WIDTH OF PIN AS SHOWN. Figure. 4-Lead Thin Shrink Small Outline Transistor Package [SC7] (KS-4) Dimensions shown in millimeters B ORDERING GUIDE Model 1 Temperature Range Package Description Package Option ADCMP35YKSZ-REEL7 4 C to +15 C 4-Lead Thin Shrink Small Outline Transistor Package [SC7] KS-4 M55 ADCMP354YKSZ-REEL7 4 C to +15 C 4-Lead Thin Shrink Small Outline Transistor Package [SC7] KS-4 M56 ADCMP356YKSZ-REEL7 4 C to +15 C 4-Lead Thin Shrink Small Outline Transistor Package [SC7] KS-4 M8V 1 Z = RoHS Compliant Part. Marking Code 4 18 Analog Devices, Inc. All rights reserved. Trademarks and registered trademarks are the property of their respective owners. D511--5/17(E) Rev. E Page 1 of 1

Single 0.275% Comparator and Reference with Dual Polarity Outputs ADCMP361

Single 0.275% Comparator and Reference with Dual Polarity Outputs ADCMP361 Data Sheet FEATURES mv ±.275% threshold Supply range:.7 V to 5.5 V Low quiescent current: 6.5 µa typical Input range includes ground Internal hysteresis: 9.3 mv typical Low input bias current: ±5 na maximum

More information

Dual Low Power 1.5% Comparator With 400 mv Reference ADCMP670

Dual Low Power 1.5% Comparator With 400 mv Reference ADCMP670 Dual Low Power.5% Comparator With mv Reference ADCMP67 FEATURES FUNCTIONAL BLOCK DIAGRAM mv ±.5% threshold Supply range:.7 V to 5.5 V Low quiescent current: 6.5 μa typical Input range includes ground Internal

More information

Ultralow Power Voltage Comparator with Reference ADCMP380

Ultralow Power Voltage Comparator with Reference ADCMP380 Data Sheet Ultralow Power Voltage Comparator with Reference FEATURES Comparator with on-chip reference Ultralow power consumption with ICC = 92 na (typical) Precision low voltage monitoring down to.5 V

More information

Supervisory Circuits with Watchdog and Manual Reset in 5-Lead SC70 and SOT-23 ADM823/ADM824/ADM825

Supervisory Circuits with Watchdog and Manual Reset in 5-Lead SC70 and SOT-23 ADM823/ADM824/ADM825 Data Sheet Supervisory Circuits with Watchdog and Manual Reset in 5-Lead SC70 and SOT-23 ADM823/ADM824/ADM825 FEATURES FUNCTIONAL BLOCK DIAGRAM Precision 2.5 V to 5 V power supply monitor 7 reset threshold

More information

0.8% Accurate Quad Voltage Monitor ADM1184

0.8% Accurate Quad Voltage Monitor ADM1184 .8% Accurate Quad Voltage Monitor ADM1184 FEATURES Powered from 2.7 V to 5.5 V on the VCC pin Monitors 4 supplies via.8% accurate comparators 4 inputs can be programmed to monitor different voltage levels

More information

ADM6823. Low Voltage, Supervisory Circuit with Watchdog and Manual Reset in 5-Lead SOT-23. Data Sheet FUNCTIONAL BLOCK DIAGRAM FEATURES APPLICATIONS

ADM6823. Low Voltage, Supervisory Circuit with Watchdog and Manual Reset in 5-Lead SOT-23. Data Sheet FUNCTIONAL BLOCK DIAGRAM FEATURES APPLICATIONS Data Sheet Low Voltage, Supervisory Circuit with Watchdog and Manual Reset in 5-Lead SOT-23 FEATURES Precision low voltage monitoring 9 reset threshold options: 1.58 V to 4.63 V (typical) 140 ms (minimum)

More information

Low Power, Adjustable UV and OV Monitor with 400 mv, ±0.275% Reference ADCMP671

Low Power, Adjustable UV and OV Monitor with 400 mv, ±0.275% Reference ADCMP671 Data Sheet Low Power, Adjustable UV and Monitor with mv, ±.7% Reference ADCMP67 FEATURES Window monitoring with minimum processor I/O Individually monitoring N rails with only N + processor I/O mv, ±.7%

More information

OBSOLETE. Simple Sequencers in 6-Lead SC70 ADM1088. Data Sheet

OBSOLETE. Simple Sequencers in 6-Lead SC70 ADM1088. Data Sheet Data Sheet Simple Sequencers in 6-Lead SC7 FEATURES Provide programmable time delays between enable signals Can be cascaded with power modules for multiple supply sequencing Power supply monitoring from.6

More information

Microprocessor Supervisory Circuit ADM1232

Microprocessor Supervisory Circuit ADM1232 Microprocessor Supervisory Circuit FEATURES Pin-compatible with MAX1232 and Dallas DS1232 Adjustable precision voltage monitor with 4.5 V and 4.75 V options Adjustable strobe monitor with 150 ms, 600 ms,

More information

High Precision Shunt Mode Voltage References ADR525/ADR530/ADR550

High Precision Shunt Mode Voltage References ADR525/ADR530/ADR550 High Precision Shunt Mode Voltage References ADR525/ADR530/ FEATURES Ultracompact SC70 and SOT-23-3 packages Temperature coefficient: 40 ppm/ C (maximum) 2 the temperature coefficient improvement over

More information

Ultralow Power Supervisory ICs with Watchdog Timer and Manual Reset ADM8611/ADM8612/ADM8613/ADM8614/ADM8615

Ultralow Power Supervisory ICs with Watchdog Timer and Manual Reset ADM8611/ADM8612/ADM8613/ADM8614/ADM8615 Ultralow Power Supervisory ICs with Watchdog Timer and Manual Reset FEATURES Ultralow power consumption with ICC = 92 na (typical) Continuous monitoring with no blank time Pretrimmed voltage monitoring

More information

Low Cost Microprocessor Supervisory Circuits ADM705/ADM706/ADM707/ADM708

Low Cost Microprocessor Supervisory Circuits ADM705/ADM706/ADM707/ADM708 Low Cost Microprocessor Supervisory Circuits ADM705/ADM706/ADM707/ADM708 FEATURES Guaranteed valid with VCC = V 90 μa quiescent current Precision supply voltage monitor 4.65 V (ADM705/ADM707) 4.40 V (ADM706/ADM708)

More information

Microprocessor Supervisory Circuit in 4-Lead SOT-143 with DSP ADM811/ADM812

Microprocessor Supervisory Circuit in 4-Lead SOT-143 with DSP ADM811/ADM812 Microprocessor Supervisory Circuit in 4-Lead SOT-143 with DSP ADM811/ADM812 FEATURES Superior upgrade for MAX811/MAX812 Specified over temperature Low power consumption: 5 μa typical Precision voltage

More information

3 V, Voltage Monitoring Microprocessor Supervisory Circuits

3 V, Voltage Monitoring Microprocessor Supervisory Circuits 3 V, Voltage Monitoring Microprocessor Supervisory Circuits ADM706P/ADM706R/ADM706S/ADM706T, ADM708R/ADM708S/ADM708T FEATURES Precision supply voltage monitor 2.63 V (ADM706P, ADM706R, ADM708R) 2.93 V

More information

Triple Processor Supervisors ADM13307

Triple Processor Supervisors ADM13307 Triple Processor Supervisors ADM337 FEATURES Triple supervisory circuits Supply voltage range of 2. V to 5.5 V Pretrimmed threshold options:.8 V, 2.5 V, 3.3 V, and 5 V Adjustable.6 V and.25 V voltage references

More information

1.2 V Precision Low Noise Shunt Voltage Reference ADR512W

1.2 V Precision Low Noise Shunt Voltage Reference ADR512W 1.2 V Precision Low Noise Shunt Voltage Reference ADR512W FEATURES Precision 1.200 V voltage reference Ultracompact 3-lead SOT-23 package No external capacitor required Low output noise: 4 µv p-p (0.1

More information

Micropower Precision CMOS Operational Amplifier AD8500

Micropower Precision CMOS Operational Amplifier AD8500 Micropower Precision CMOS Operational Amplifier AD85 FEATURES Supply current: μa maximum Offset voltage: mv maximum Single-supply or dual-supply operation Rail-to-rail input and output No phase reversal

More information

Low Cost Microprocessor Supervisory Circuits ADM705/ADM706/ADM707/ADM708

Low Cost Microprocessor Supervisory Circuits ADM705/ADM706/ADM707/ADM708 Low Cost Microprocessor Supervisory Circuits ADM705/ADM706/ADM707/ADM708 FEATURES Guaranteed valid with VCC = V 90 μa quiescent current Precision supply voltage monitor 4.65 V (ADM705/ADM707) 4.40 V (ADM706/ADM708)

More information

High Temperature, Low Drift, Micropower 2.5 V Reference ADR225

High Temperature, Low Drift, Micropower 2.5 V Reference ADR225 Data Sheet FEATURES Extreme high temperature operation 4 C to + C, 8-lead FLATPACK 4 C to +75 C, 8-lead SOIC Temperature coefficient 4 ppm/ C, 8-lead FLATPACK ppm/ C, 8-lead SOIC High output current: ma

More information

FET Drive Simple Sequencers ADM6819/ADM6820

FET Drive Simple Sequencers ADM6819/ADM6820 FET Drive Simple Sequencers ADM6819/ADM682 FEATURES Single chip enables power supply sequencing of two supplies On-board charge pump fully enhances N-channel FET Adjustable primary supply monitor to.618

More information

High Precision Shunt Mode Voltage References ADR520/ADR525/ADR530/ADR540/ADR550

High Precision Shunt Mode Voltage References ADR520/ADR525/ADR530/ADR540/ADR550 High Precision Shunt Mode Voltage References ADR520/ADR525/ADR530/ADR540/ FEATURES Ultracompact SC70 and SOT-23-3 packages Temperature coefficient: 40 ppm/ C (maximum) 2 the temperature coefficient improvement

More information

2.5 V/3.3 V, 2:1 Multiplexer/ Demultiplexer Bus Switch ADG3248

2.5 V/3.3 V, 2:1 Multiplexer/ Demultiplexer Bus Switch ADG3248 2. V/3.3 V, 2:1 Multiplexer/ Demultiplexer Bus Switch FEATURES 22 ps propagation delay through the switch 4. Ω switch connection between ports Data rate 1.244 Gbps 2. V/3.3 V supply operation Level translation

More information

Dual Processor Supervisors with Watchdog ADM13305

Dual Processor Supervisors with Watchdog ADM13305 Dual Processor Supervisors with Watchdog ADM335 FEATURES Dual supervisory circuits Supply voltage range of 2.7 V to 5.5 V Pretrimmed threshold options:.8 V, 2.5 V, 3.3 V, and 5 V Adjustable.6 V voltage

More information

Low Noise, Micropower 5.0 V Precision Voltage Reference ADR293-EP

Low Noise, Micropower 5.0 V Precision Voltage Reference ADR293-EP Enhanced Product Low Noise, Micropower 5.0 V Precision Voltage Reference FEATURES 6.0 V to 15 V supply range Supply current: 15 μa maximum Low noise: 15 μv p-p typical (0.1 Hz to 10 Hz) High output current:

More information

Precision Micropower Shunt Mode Voltage References

Precision Micropower Shunt Mode Voltage References Data Sheet Precision Micropower Shunt Mode Voltage References ADR5040/ADR504/ADR5043/ADR5044/ FEATURES Ultracompact SC70 and SOT-23 packages Low temperature coefficient: 75 ppm/ C (maximum) Pin compatible

More information

10-Channel Gamma Buffer with VCOM Driver ADD8710

10-Channel Gamma Buffer with VCOM Driver ADD8710 1-Channel Gamma Buffer with VCOM Driver ADD871 FEATURES Single-supply operation: 4.5 V to 18 V Upper/lower buffers swing to VS/GND Gamma continuous output current: >1 ma VCOM peak output current: 25 ma

More information

9- and 11-Channel, Muxed Input LCD Reference Buffers AD8509/AD8511

9- and 11-Channel, Muxed Input LCD Reference Buffers AD8509/AD8511 9- and -Channel, Muxed Input LCD Reference Buffers AD8509/AD85 FEATURES Single-supply operation: 3.3 V to 6.5 V High output current: 300 ma Low supply current: 6 ma Stable with 000 pf loads Pin compatible

More information

3.3 V, Full-Duplex, 840 μa, 20 Mbps, EIA RS-485 Transceiver ADM3491-1

3.3 V, Full-Duplex, 840 μa, 20 Mbps, EIA RS-485 Transceiver ADM3491-1 FEATURES Operates with 3.3 V supply EIA RS-422 and RS-485 compliant over full CM range 19 kω input impedance Up to 50 transceivers on bus 20 Mbps data rate Short-circuit protection Specified over full

More information

Single Comparator with Known Power-Up State ADCMP391

Single Comparator with Known Power-Up State ADCMP391 FEATURES Single-supply voltage operation:.3 to 5.5 Rail-to-rail common-mode input voltage range Low input offset voltage across CMR: 1 m typical Guarantees comparator output logic low from CC 0.9 to undervoltage

More information

Logic Controlled, High-Side Power Switch with Reverse Current Blocking ADP195

Logic Controlled, High-Side Power Switch with Reverse Current Blocking ADP195 Data Sheet Logic Controlled, High-Side Power Switch with Reverse Current Blocking ADP95 FEATURES Ultralow on resistance (RDSON) 5 mω @.6 V 55 mω @.5 V 65 mω @.8 V mω @. V Input voltage range:. V to.6 V.

More information

Single, 3 V, CMOS, LVDS Differential Line Receiver ADN4662

Single, 3 V, CMOS, LVDS Differential Line Receiver ADN4662 Data Sheet FEATURES ±15 kv ESD protection on input pins 400 Mbps (200 MHz) switching rates Flow-through pinout simplifies PCB layout 2.5 ns maximum propagation delay 3.3 V power supply High impedance outputs

More information

Zero Drift, Unidirectional Current Shunt Monitor AD8219

Zero Drift, Unidirectional Current Shunt Monitor AD8219 Zero Drift, Unidirectional Current Shunt Monitor FEATURES High common-mode voltage range 4 V to 8 V operating.3 V to +85 V survival Buffered output voltage Gain = 6 V/V Wide operating temperature range:

More information

High Speed, 3.3 V/5 V Quad 2:1 Mux/Demux (4-Bit, 1 of 2) Bus Switch ADG3257

High Speed, 3.3 V/5 V Quad 2:1 Mux/Demux (4-Bit, 1 of 2) Bus Switch ADG3257 High Speed, 3.3 V/5 V Quad 2:1 Mux/Demux (4-Bit, 1 of 2) Bus Switch ADG3257 FEATURES 100 ps propagation delay through the switch 2 Ω switches connect inputs to outputs Data rates up to 933 Mbps Single

More information

Quad 7 ns Single Supply Comparator AD8564

Quad 7 ns Single Supply Comparator AD8564 Quad 7 ns Single Supply Comparator AD8564 FEATURES 5 V single-supply operation 7 ns propagation delay Low power Separate input and output sections TTL/CMOS logic-compatible outputs Wide output swing TSSOP,

More information

1.2 V Ultralow Power High PSRR Voltage Reference ADR280

1.2 V Ultralow Power High PSRR Voltage Reference ADR280 1.2 V Ultralow Power High PSRR Voltage Reference FEATURES 1.2 V precision output Excellent line regulation: 2 ppm/v typical High power supply ripple rejection: 80 db at 220 Hz Ultralow power supply current:

More information

1.0 V Precision Low Noise Shunt Voltage Reference ADR510

1.0 V Precision Low Noise Shunt Voltage Reference ADR510 1.0 V Precision Low Noise Shunt Voltage Reference FEATURES Precision 1.000 V voltage reference Ultracompact 3 mm 3 mm SOT-23 package No external capacitor required Low output noise: 4 μv p-p (0.1 Hz to

More information

OBSOLETE. Charge Pump Regulator for Color TFT Panel ADM8830

OBSOLETE. Charge Pump Regulator for Color TFT Panel ADM8830 FEATURES 3 Output Voltages (+5.1 V, +15.3 V, 10.2 V) from One 3 V Input Supply Power Efficiency Optimized for Use with TFT in Mobile Phones Low Quiescent Current Low Shutdown Current (

More information

AD8218 REVISION HISTORY

AD8218 REVISION HISTORY Zero Drift, Bidirectional Current Shunt Monitor FEATURES High common-mode voltage range 4 V to 8 V operating.3 V to 85 V survival Buffered output voltage Gain = 2 V/V Wide operating temperature range:

More information

1.2 V Precision Low Noise Shunt Voltage Reference ADR512

1.2 V Precision Low Noise Shunt Voltage Reference ADR512 FEATURES Precision 1.200 V Voltage Reference Ultracompact 3 mm 3 mm SOT-23 Package No External Capacitor Required Low Output Noise: 4 µv p-p (0.1 Hz to 10 Hz) Initial Accuracy: ±0.3% Max Temperature Coefficient:

More information

Dual, 3 V, CMOS, LVDS Differential Line Receiver ADN4664

Dual, 3 V, CMOS, LVDS Differential Line Receiver ADN4664 Dual, 3 V, CMOS, LVDS Differential Line Receiver ADN4664 FEATURES ±15 kv ESD protection on output pins 400 Mbps (200 MHz) switching rates Flow-through pinout simplifies PCB layout 100 ps channel-to-channel

More information

High Voltage, Current Shunt Monitor AD8215

High Voltage, Current Shunt Monitor AD8215 FEATURES ±4 V human body model (HBM) ESD High common-mode voltage range V to +6 V operating 3 V to +68 V survival Buffered output voltage Wide operating temperature range 8-Lead SOIC: 4 C to + C Excellent

More information

High Voltage, Current Shunt Monitor AD8215

High Voltage, Current Shunt Monitor AD8215 High Voltage, Current Shunt Monitor AD825 FEATURES ±4 V HBM ESD High common-mode voltage range 2 V to +65 V operating 3 V to +68 V survival Buffered output voltage Wide operating temperature range 8-Lead

More information

Programmable Low Voltage 1:10 LVDS Clock Driver ADN4670

Programmable Low Voltage 1:10 LVDS Clock Driver ADN4670 Data Sheet Programmable Low Voltage 1:10 LVDS Clock Driver FEATURES FUNCTIONAL BLOCK DIAGRAM Low output skew

More information

High Resolution, Zero-Drift Current Shunt Monitor AD8217

High Resolution, Zero-Drift Current Shunt Monitor AD8217 High Resolution, Zero-Drift Current Shunt Monitor AD8217 FEATURES High common-mode voltage range 4.5 V to 8 V operating V to 85 V survival Buffered output voltage Wide operating temperature range: 4 C

More information

3.3 V, Full-Duplex, 840 µa, 20 Mbps, EIA RS-485 Transceiver ADM3491

3.3 V, Full-Duplex, 840 µa, 20 Mbps, EIA RS-485 Transceiver ADM3491 3.3 V, Full-Duplex, 840 µa, 20 Mbps, EIA RS-485 Transceiver ADM3491 FEATUS Operates with 3.3 V supply EIA RS-422 and RS-485 compliant over full CM range 19 kω input impedance Up to 50 transceivers on bus

More information

High Speed Industrial CAN Transceiver with Bus Protection for 24 V Systems ADM3051

High Speed Industrial CAN Transceiver with Bus Protection for 24 V Systems ADM3051 High Speed Industrial CAN Transceiver with Bus Protection for 24 V Systems FEATURES Physical layer CAN transceiver 5 V operation on VCC Complies with ISO 11898 standard High speed data rates up to 1 Mbps

More information

Continuous Wave Laser Average Power Controller ADN2830

Continuous Wave Laser Average Power Controller ADN2830 a FEATURES Bias Current Range 4 ma to 200 ma Monitor Photodiode Current 50 A to 1200 A Closed-Loop Control of Average Power Laser and Laser Alarms Automatic Laser Shutdown, Full Current Parameter Monitoring

More information

Low Power, Precision, Auto-Zero Op Amps AD8538/AD8539 FEATURES Low offset voltage: 13 μv maximum Input offset drift: 0.03 μv/ C Single-supply operatio

Low Power, Precision, Auto-Zero Op Amps AD8538/AD8539 FEATURES Low offset voltage: 13 μv maximum Input offset drift: 0.03 μv/ C Single-supply operatio Low Power, Precision, Auto-Zero Op Amps FEATURES Low offset voltage: 3 μv maximum Input offset drift:.3 μv/ C Single-supply operation: 2.7 V to 5.5 V High gain, CMRR, and PSRR Low input bias current: 25

More information

Dual, 3 V, CMOS, LVDS High Speed Differential Driver ADN4663

Dual, 3 V, CMOS, LVDS High Speed Differential Driver ADN4663 Dual, 3 V, CMOS, LVDS High Speed Differential Driver ADN4663 FEATURES ±15 kv ESD protection on output pins 600 Mbps (300 MHz) switching rates Flow-through pinout simplifies PCB layout 300 ps typical differential

More information

Octal, 16-Bit DAC with 5 ppm/ C On-Chip Reference in 14-Lead TSSOP AD5668-EP

Octal, 16-Bit DAC with 5 ppm/ C On-Chip Reference in 14-Lead TSSOP AD5668-EP Data Sheet Octal, -Bit with 5 ppm/ C On-Chip Reference in -Lead TSSOP FEATURES Enhanced product features Supports defense and aerospace applications (AQEC) Military temperature range ( 55 C to +5 C) Controlled

More information

High Voltage Current Shunt Monitor AD8211

High Voltage Current Shunt Monitor AD8211 High Voltage Current Shunt Monitor AD8211 FEATURES Qualified for automotive applications ±4 V HBM ESD High common-mode voltage range 2 V to +65 V operating 3 V to +68 V survival Buffered output voltage

More information

1.2 V Precision Low Noise Shunt Voltage Reference ADR512

1.2 V Precision Low Noise Shunt Voltage Reference ADR512 1.2 V Precision Low Noise Shunt Voltage Reference FEATURES Precision 1.200 V Voltage Reference Ultracompact 3 mm 3 mm SOT-23 Package No External Capacitor Required Low Output Noise: 4 V p-p (0.1 Hz to

More information

AD8613/AD8617/AD8619. Low Cost Micropower, Low Noise CMOS Rail-to-Rail, Input/Output Operational Amplifiers PIN CONFIGURATIONS FEATURES APPLICATIONS

AD8613/AD8617/AD8619. Low Cost Micropower, Low Noise CMOS Rail-to-Rail, Input/Output Operational Amplifiers PIN CONFIGURATIONS FEATURES APPLICATIONS Low Cost Micropower, Low Noise CMOS Rail-to-Rail, Input/Output Operational Amplifiers FEATURES Offset voltage: 2.2 mv maximum Low input bias current: pa maximum Single-supply operation:.8 V to 5 V Low

More information

Zero Drift, Digitally Programmable Instrumentation Amplifier AD8231-EP OP FUNCTIONAL BLOCK DIAGRAM FEATURES ENHANCED PRODUCT FEATURES

Zero Drift, Digitally Programmable Instrumentation Amplifier AD8231-EP OP FUNCTIONAL BLOCK DIAGRAM FEATURES ENHANCED PRODUCT FEATURES Zero Drift, Digitally Programmable Instrumentation Amplifier AD8231-EP FEATURES Digitally/pin-programmable gain G = 1, 2, 4, 8, 16, 32, 64, or 128 Specified from 55 C to +125 C 5 nv/ C maximum input offset

More information

Low Cost P Supervisory Circuits ADM705 ADM708

Low Cost P Supervisory Circuits ADM705 ADM708 a FEATURES Guaranteed Valid with = 1 V 190 A Quiescent Current Precision Supply-Voltage Monitor 4.65 V (ADM707) 4.40 V (/) 200 ms Reset Pulsewidth Debounced TTL/CMOS Manual Reset Input () Independent Watchdog

More information

50 ma, High Voltage, Micropower Linear Regulator ADP1720

50 ma, High Voltage, Micropower Linear Regulator ADP1720 5 ma, High Voltage, Micropower Linear Regulator ADP72 FEATURES Wide input voltage range: 4 V to 28 V Maximum output current: 5 ma Low light load current: 28 μa at μa load 35 μa at μa load Low shutdown

More information

ADCMP608. Rail-to-Rail, Fast, Low Power 2.5 V to 5.5 V, Single-Supply TTL/CMOS Comparator. Data Sheet FEATURES FUNCTIONAL BLOCK DIAGRAM APPLICATIONS

ADCMP608. Rail-to-Rail, Fast, Low Power 2.5 V to 5.5 V, Single-Supply TTL/CMOS Comparator. Data Sheet FEATURES FUNCTIONAL BLOCK DIAGRAM APPLICATIONS Data Sheet Rail-to-Rail, Fast, Low Power 2.5 V to 5.5 V, Single-Supply TTL/CMOS Comparator FEATURES Fully specified rail to rail at VCC = 2.5 V to 5.5 V Input common-mode voltage from 0.2 V to VCC + 0.2

More information

Rail-to-Rail, Fast, Low Power 2.5 V to 5.5 V, Single-Supply TTL/CMOS Comparator AD8468

Rail-to-Rail, Fast, Low Power 2.5 V to 5.5 V, Single-Supply TTL/CMOS Comparator AD8468 Data Sheet Rail-to-Rail, Fast, Low Power 2.5 V to 5.5 V, Single-Supply TTL/CMOS Comparator FEATURES Fully specified rail to rail at VCC = 2.5 V to 5.5 V Input common-mode voltage from 0.2 V to VCC + 0.2

More information

Dual, Ultralow Distortion, Ultralow Noise Op Amp AD8599

Dual, Ultralow Distortion, Ultralow Noise Op Amp AD8599 Dual, Ultralow Distortion, Ultralow Noise Op Amp FEATURES Low noise: 1 nv/ Hz at 1 khz Low distortion: 5 db THD @ khz

More information

1 MHz to 8 GHz, 70 db Logarithmic Detector/Controller AD8318-EP

1 MHz to 8 GHz, 70 db Logarithmic Detector/Controller AD8318-EP Enhanced Product FEATURES Wide bandwidth: MHz to 8 GHz High accuracy: ±. db over db range (f

More information

0.4 Ω CMOS, Dual DPDT Switch in WLCSP/LFCSP/TSSOP ADG888

0.4 Ω CMOS, Dual DPDT Switch in WLCSP/LFCSP/TSSOP ADG888 FEATURES.8 V to 5.5 V operation Ultralow on resistance.4 Ω typical.6 Ω maximum at 5 V supply Excellent audio performance, ultralow distortion.7 Ω typical.4 Ω maximum RON flatness High current carrying

More information

LC 2 MOS 5 Ω RON SPST Switches ADG451/ADG452/ADG453

LC 2 MOS 5 Ω RON SPST Switches ADG451/ADG452/ADG453 LC 2 MOS 5 Ω RON SPST Switches ADG45/ADG452/ADG453 FEATURES Low on resistance (4 Ω) On resistance flatness (0.2 Ω) 44 V supply maximum ratings ±5 V analog signal range Fully specified at ±5 V, 2 V, ±5

More information

1 pc Charge Injection, 100 pa Leakage, CMOS, ±5 V/+5 V/+3 V Dual SPDT Switch ADG636

1 pc Charge Injection, 100 pa Leakage, CMOS, ±5 V/+5 V/+3 V Dual SPDT Switch ADG636 pc Charge Injection, pa Leakage, CMOS, ±5 V/+5 V/+3 V Dual SPDT Switch ADG636 FEATURES pc charge injection ±2.7 V to ±5.5 V dual supply +2.7 V to +5.5 V single supply Automotive temperature range: 4 C

More information

Low Power, Rail-to-Rail Output, Precision JFET Amplifiers AD8641/AD8642/AD8643

Low Power, Rail-to-Rail Output, Precision JFET Amplifiers AD8641/AD8642/AD8643 Data Sheet Low Power, Rail-to-Rail Output, Precision JFET Amplifiers AD864/AD8642/AD8643 FEATURES Low supply current: 25 μa max Very low input bias current: pa max Low offset voltage: 75 μv max Single-supply

More information

0.35 Ω CMOS 1.65 V to 3.6 V Single SPDT Switch/2:1 MUX ADG839

0.35 Ω CMOS 1.65 V to 3.6 V Single SPDT Switch/2:1 MUX ADG839 .35 Ω CMOS 1.65 V to 3.6 V Single SPT Switch/2:1 MUX AG839 FEATURES 1.65 V to 3.6 V operation Ultralow on resistance:.35 Ω typical.5 Ω max at 2.7 V supply Excellent audio performance, ultralow distortion:.55

More information

Dual, High Voltage Current Shunt Monitor AD8213

Dual, High Voltage Current Shunt Monitor AD8213 Dual, High Voltage Current Shunt Monitor AD823 FEATURES ±4 V HBM ESD High common-mode voltage range 2 V to +6 V operating 3 V to +68 V survival Buffered output voltage Wide operating temperature range

More information

High Voltage Current Shunt Monitor AD8212

High Voltage Current Shunt Monitor AD8212 High Voltage Current Shunt Monitor FEATURES Adjustable gain High common-mode voltage range 7 V to 65 V typical 7 V to >500 V with external pass transistor Current output Integrated 5 V series regulator

More information

Fault Protection and Detection, 10 Ω RON, Quad SPST Switches ADG5412F-EP

Fault Protection and Detection, 10 Ω RON, Quad SPST Switches ADG5412F-EP Enhanced Product FEATURES Overvoltage protection up to 55 V and +55 V Power-off protection up to 55 V and +55 V Overvoltage detection on source pins Low on resistance: Ω On-resistance flatness:.5 Ω 5.5

More information

1.8 V Low Power CMOS Rail-to-Rail Input/Output Operational Amplifier AD8515

1.8 V Low Power CMOS Rail-to-Rail Input/Output Operational Amplifier AD8515 Data Sheet FEATURES Single-supply operation: 1.8 V to 5 V Offset voltage: 6 mv maximum Space-saving SOT-23 and SC7 packages Slew rate: 2.7 V/μs Bandwidth: 5 MHz Rail-to-rail input and output swing Low

More information

ADG1411/ADG1412/ADG1413

ADG1411/ADG1412/ADG1413 .5 Ω On Resistance, ±5 V/+2 V/±5 V, icmos, Quad SPST Switches ADG4/ADG42/ADG43 FEATURES.5 Ω on resistance.3 Ω on-resistance flatness. Ω on-resistance match between channels Continuous current per channel

More information

Very Low Distortion, Dual-Channel, High Precision Difference Amplifier AD8274 FUNCTIONAL BLOCK DIAGRAM +V S FEATURES APPLICATIONS GENERAL DESCRIPTION

Very Low Distortion, Dual-Channel, High Precision Difference Amplifier AD8274 FUNCTIONAL BLOCK DIAGRAM +V S FEATURES APPLICATIONS GENERAL DESCRIPTION Very Low Distortion, Dual-Channel, High Precision Difference Amplifier AD8273 FEATURES ±4 V HBM ESD Very low distortion.25% THD + N (2 khz).15% THD + N (1 khz) Drives 6 Ω loads Two gain settings Gain of

More information

1.5 Ω On Resistance, ±15 V/12 V/±5 V, icmos, Dual SPDT Switch ADG1436

1.5 Ω On Resistance, ±15 V/12 V/±5 V, icmos, Dual SPDT Switch ADG1436 Data Sheet.5 Ω On Resistance, ±5 V/2 V/±5 V, icmos, Dual SPDT Switch ADG436 FEATURES.5 Ω on resistance.3 Ω on-resistance flatness. Ω on-resistance match between channels Continuous current per channel

More information

150 ma, Low Dropout, CMOS Linear Regulator ADP1710/ADP1711

150 ma, Low Dropout, CMOS Linear Regulator ADP1710/ADP1711 5 ma, Low Dropout, CMOS Linear Regulator ADP7/ADP7 FEATURES Maximum output current: 5 ma Input voltage range: 2.5 V to 5.5 V Light load efficient IGND = 35 μa with zero load IGND = 4 μa with μa load Low

More information

Current Output/Serial Input, 16-Bit DAC AD5543-EP

Current Output/Serial Input, 16-Bit DAC AD5543-EP Data Sheet Current Output/Serial Input, 16-Bit DAC FEATURES FUNCTIONAL BLOCK DIAGRAM 1/+2 LSB DNL ±3 LSB INL Low noise: 12 nv/ Hz Low power: IDD = 1 μa.5 μs settling time 4Q multiplying reference input

More information

3 V, LVDS, Quad, CMOS Differential Line Driver ADN4665

3 V, LVDS, Quad, CMOS Differential Line Driver ADN4665 3 V, LVDS, Quad, CMOS Differential Line Driver ADN4665 FEATURES ±15 kv ESD protection on output pins 400 Mbps (200 MHz) switching rates 100 ps typical differential skew 400 ps maximum differential skew

More information

Low Power, Wide Supply Range, Low Cost Unity-Gain Difference Amplifier AD8276

Low Power, Wide Supply Range, Low Cost Unity-Gain Difference Amplifier AD8276 Low Power, Wide Supply Range, Low Cost Unity-Gain Difference Amplifier AD87 FEATURES Wide input range Rugged input overvoltage protection Low supply current: μa maximum Low power dissipation:. mw at VS

More information

3 V LVDS Quad CMOS Differential Line Driver ADN4667

3 V LVDS Quad CMOS Differential Line Driver ADN4667 FEATURES ±15 kv ESD protection on output pins 400 Mbps (200 MHz) switching rates Flow through pinout simplifies PCB layout 300 ps typical differential skew 400 ps maximum differential skew 1.7 ns maximum

More information

4 MHz, 7 nv/ Hz, Low Offset and Drift, High Precision Amplifier ADA EP

4 MHz, 7 nv/ Hz, Low Offset and Drift, High Precision Amplifier ADA EP Enhanced Product FEATURES Low offset voltage and low offset voltage drift Maximum offset voltage: 9 µv at TA = 2 C Maximum offset voltage drift:.2 µv/ C Moisture sensitivity level (MSL) rated Low input

More information

+5 V Powered RS-232/RS-422 Transceiver AD7306

+5 V Powered RS-232/RS-422 Transceiver AD7306 a FEATURES RS-3 and RS- on One Chip Single + V Supply. F Capacitors Short Circuit Protection Excellent Noise Immunity Low Power BiCMOS Technology High Speed, Low Skew RS- Operation C to + C Operations

More information

Ultrafast Comparators AD96685/AD96687

Ultrafast Comparators AD96685/AD96687 a FEATURES Fast: 2.5 ns Propagation Delay Low Power: 118 mw per Comparator Packages: DIP, SOIC, PLCC Power Supplies: +5 V, 5.2 V Logic Compatibility: ECL 50 ps Delay Dispersion APPLICATIONS High Speed

More information

Low Capacitance, Low Charge Injection, ±15 V/12 V icmos, Dual SPDT Switch ADG1236

Low Capacitance, Low Charge Injection, ±15 V/12 V icmos, Dual SPDT Switch ADG1236 ata Sheet Low Capacitance, Low Charge Injection, ±5 V/2 V icmos, ual SPT Switch FEATURES.3 pf off capacitance 3.5 pf on capacitance pc charge injection 33 V supply range 2 Ω on resistance Fully specified

More information

Rail-to-Rail, High Output Current Amplifier AD8397

Rail-to-Rail, High Output Current Amplifier AD8397 Rail-to-Rail, High Output Current Amplifier FEATURES Dual operational amplifier Voltage feedback Wide supply range from 3 V to 24 V Rail-to-rail output Output swing to within.5 V of supply rails High linear

More information

Single-Supply, 42 V System Difference Amplifier AD8206

Single-Supply, 42 V System Difference Amplifier AD8206 Single-Supply, 42 V System Difference Amplifier FEATURES Ideal for current shunt applications High common-mode voltage range 2 V to +65 V operating 25 V to +75 V survival Gain = 20 Wide operating temperature

More information

CMOS 1.8 V to 5.5 V, 2.5 Ω 2:1 Mux/SPDT Switch in SOT-23 ADG719-EP

CMOS 1.8 V to 5.5 V, 2.5 Ω 2:1 Mux/SPDT Switch in SOT-23 ADG719-EP CMOS 1.8 V to 5.5 V, 2.5 Ω 2:1 Mux/SPT Switch in SOT-23 AG719-EP FEATURES 1.8 V to 5.5 V single supply 4 Ω (max) on resistance.75 Ω (typ) on resistance flatness 3 db bandwidth > 2 MHz Rail-to-rail operation

More information

Low Voltage, 400 MHz, Quad 2:1 Mux with 3 ns Switching Time ADG774A

Low Voltage, 400 MHz, Quad 2:1 Mux with 3 ns Switching Time ADG774A Low Voltage, 4 MHz, Quad 2:1 Mux with 3 ns Switching Time FEATURES Bandwidth: >4 MHz Low insertion loss and on resistance: 2.2 Ω typical On resistance flatness:.3 Ω typical Single 3 V/5 V supply operation

More information

Zero-Drift, High Voltage, Bidirectional Difference Amplifier AD8207

Zero-Drift, High Voltage, Bidirectional Difference Amplifier AD8207 Zero-Drift, High Voltage, Bidirectional Difference Amplifier FEATURES Ideal for current shunt applications EMI filters included μv/ C maximum input offset drift High common-mode voltage range 4 V to +65

More information

1 MHz to 10 GHz, 45 db Log Detector/Controller AD8319

1 MHz to 10 GHz, 45 db Log Detector/Controller AD8319 FEATURES Wide bandwidth: 1 MHz to 10 GHz High accuracy: ±1.0 db over temperature 45 db dynamic range up to 8 GHz Stability over temperature: ±0.5 db Low noise measurement/controller output VOUT Pulse response

More information

Audio, Dual-Matched NPN Transistor MAT12

Audio, Dual-Matched NPN Transistor MAT12 Data Sheet FEATURES Very low voltage noise: nv/ Hz maximum at 00 Hz Excellent current gain match: 0.5% typical Low offset voltage (VOS): 200 μv maximum Outstanding offset voltage drift: 0.03 μv/ C typical

More information

1 Ω Typical On Resistance, ±5 V, +12 V, +5 V, and +3.3 V Dual SPDT Switches ADG1636

1 Ω Typical On Resistance, ±5 V, +12 V, +5 V, and +3.3 V Dual SPDT Switches ADG1636 FEATURES Ω typical on resistance.2 Ω on resistance flatness ±3.3 V to ±8 V dual supply operation 3.3 V to 6 V single supply operation No VL supply required 3 V logic-compatible inputs Rail-to-rail operation

More information

Quad SPDT Switch ADG333A

Quad SPDT Switch ADG333A Quad SPT Switch AG333A FEATURES 44 V supply maximum ratings VSS to V analog signal range Low on resistance (45 Ω max) Low RON (5 Ω max) Low RON match (4 Ω max) Low power dissipation Fast switching times

More information

Very Low Distortion, Precision Difference Amplifier AD8274

Very Low Distortion, Precision Difference Amplifier AD8274 Very Low Distortion, Precision Difference Amplifier AD8274 FEATURES Very low distortion.2% THD + N (2 khz).% THD + N ( khz) Drives Ω loads Excellent gain accuracy.3% maximum gain error 2 ppm/ C maximum

More information

High Voltage, Bidirectional Current Shunt Monitor AD8210

High Voltage, Bidirectional Current Shunt Monitor AD8210 FEATURES ±4 V HBM ESD High common-mode voltage range 2 V to +65 V operating 5 V to +68 V survival Buffered output voltage 5 ma output drive capability Wide operating temperature range: 4 C to +125 C Ratiometric

More information

AD864/AD8642/AD8643 TABLE OF CONTENTS Specifications... 3 Electrical Characteristics... 3 Absolute Maximum Ratings... 5 ESD Caution... 5 Typical Perfo

AD864/AD8642/AD8643 TABLE OF CONTENTS Specifications... 3 Electrical Characteristics... 3 Absolute Maximum Ratings... 5 ESD Caution... 5 Typical Perfo FEATURES Low supply current: 25 µa max Very low input bias current: pa max Low offset voltage: 75 µv max Single-supply operation: 5 V to 26 V Dual-supply operation: ±2.5 V to ±3 V Rail-to-rail output Unity-gain

More information

Octal, RS-232/RS-423 Line Driver ADM5170

Octal, RS-232/RS-423 Line Driver ADM5170 a FEATURES Eight Single Ended Line Drivers in One Package Meets EIA Standard RS-3E, RS-3A and CCITT V./X. Resistor Programmable Slew Rate Wide Supply Voltage Range Low Power CMOS 3-State Outputs TTL/CMOS

More information

20 MHz to 6 GHz RF/IF Gain Block ADL5542

20 MHz to 6 GHz RF/IF Gain Block ADL5542 FEATURES Fixed gain of db Operation up to 6 GHz Input/output internally matched to Ω Integrated bias control circuit Output IP3 46 dbm at MHz 4 dbm at 9 MHz Output 1 db compression:.6 db at 9 MHz Noise

More information

CMOS Switched-Capacitor Voltage Converters ADM660/ADM8660

CMOS Switched-Capacitor Voltage Converters ADM660/ADM8660 CMOS Switched-Capacitor Voltage Converters ADM66/ADM866 FEATURES ADM66: Inverts or Doubles Input Supply Voltage ADM866: Inverts Input Supply Voltage ma Output Current Shutdown Function (ADM866) 2.2 F or

More information

0.5 Ω CMOS, 1.8 V to 5.5 V, Dual SPDT/2:1 Mux, Mini LFCSP ADG854

0.5 Ω CMOS, 1.8 V to 5.5 V, Dual SPDT/2:1 Mux, Mini LFCSP ADG854 .5 Ω CMOS, 1.8 V to 5.5 V, Dual SPDT/2:1 Mux, Mini LFCSP ADG854 FEATURES.8 Ω typical on resistance Less than 1 Ω maximum on resistance at 85 C 1.8 V to 5.5 V single supply High current carrying capability:

More information

High Voltage, Bidirectional Current Shunt Monitor AD8210

High Voltage, Bidirectional Current Shunt Monitor AD8210 High Voltage, Bidirectional Current Shunt Monitor FEATURES ±4 V HBM ESD High common-mode voltage range 2 V to +65 V operating 5 V to +68 V survival Buffered output voltage 5 ma output drive capability

More information