LT , LT MICROPOWER INTEGRATED VOLTAGE REFERENCES

Size: px
Start display at page:

Download "LT , LT MICROPOWER INTEGRATED VOLTAGE REFERENCES"

Transcription

1 LT4-.2, LT4-2.5 Initial Accuracy ±4 mv for LT4-.2 ±2 mv for LT4-2.5 Micropower Operation Operates up to 2 ma Very Low Reference Impedance Applications: Portable Meter Reference Portable Test Instruments Battery-Operated Systems Current-Loop Instrumentation NC NC NC ANODE SLVS22M JANUARY 989 REVISED MAY 28 D OR PW PACKAGE (TOP VIEW) LP PACKAGE (TOP VIEW) description/ordering information ANODE The LT4 micropower voltage reference is a CATHODE two-terminal band-gap reference diode designed NC to provide high accuracy and excellent temperature characteristics at very low operating NC No internal connection currents. Optimizing the key parameters in the design, processing, and testing of the device results in specifications previously attainable only with selected units. The LT4 is a pin-for-pin replacement for the LM285 and LM385 series of references, with improved specifications. It is an excellent device for use in systems in which accuracy previously was attained at the expense of power consumption and trimming. The LT4C is characterized for operation from C to 7 C. The LT4I is characterized for operation from 4 C to 85 C CATHODE NC CATHODE NC NC No internal connection Terminals 6 and 8 are internally connected. Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet. PRODUCTION DATA information is current as of publication date. Products conform to specifications per the terms of Texas Instruments standard warranty. Production processing does not necessarily include testing of all parameters. Copyright 28, Texas Instruments Incorporated POST OFFICE BOX DALLAS, TEXAS 75265

2 LT4-.2, LT4-2.5 SLVS22M JANUARY 989 REVISED MAY 28 description/ordering information (continued) symbol T A C to7 C 4 C to85 C V Z TYP 2V.2 25V 2.5 2V.2 25V 2.5 SOIC (D) TSSOP (PW) SOIC (D) TSSOP (PW) SOIC (D) TSSOP (PW) SOIC (D) TSSOP (PW) ORDERING INFORMATION PACKAGE Tube of 75 Reel of 25 Tube of 5 Reel of 2 Tube of 75 Reel of 25 Tube of 5 Reel of 2 Tube of 75 Reel of 25 Tube of 5 Reel of 2 Tube of 75 Reel of 25 Tube of 5 Reel of 2 ORDERABLE PART NUMBER LT4CD--2 LT4CDR--2 LT4CPW--2 LT4CPWR--2 LT4CD-2-5 LT4CDR-2-5 LT4CPW-2-5 LT4CPWR-2-5 LT4ID--2 LT4IDR--2 LT4IPW--2 LT4IPWR--2 LT4ID-2-5 LT4IDR-2-5 LT4IPW-2-5 LT4IPWR-2-5 4C-2 4C-2 4C-25 4C-25 4I-2 4I-2 4I-25 4I-25 TOP-SIDE MARKING For the most current package and ordering information, see the Package Option Addendum at the end of this document, or see the TI web site at Package drawings, thermal data, and symbolization are available at ANODE (A) CATHODE (K) 2 POST OFFICE BOX DALLAS, TEXAS 75265

3 LT4-.2, LT4-2.5 SLVS22M JANUARY 989 REVISED MAY 28 schematic LT4-.2 CATHODE 7.5 kω Q2 Q3 Q 2 kω Q4 Q2 Q Q 2 pf 2 pf 5 kω 6 kω Q9 5 kω Q5 Q8 3 kω 5 Ω Q6 Q7 Q3 6 kω ANODE LT4-2.5 CATHODE 7.5 kω Q2 Q3 Q 2 kω Q4 Q2 Q 5 kω Q 2 pf 2 pf 5 kω 6 kω Q9 5 kω Q5 Q8 3 kω 5 Ω Q6 Q7 Q3 6 kω 5 kω ANODE NOTE A: All component values shown are nominal. POST OFFICE BOX DALLAS, TEXAS

4 LT4-.2, LT4-2.5 SLVS22M JANUARY 989 REVISED MAY 28 absolute maximum ratings over operating free-air temperature range (unless otherwise noted) Reverse current, I R ma Forward current, I F ma Package thermal impedance, θ JA (see Notes and 2): D package C/W PW package C/W Operating virtual junction temperature, T J C Lead temperature,6 mm (/6 inch) from case for seconds C Storage temperature range, T stg C to 5 C Stresses beyond those listed under absolute maximum ratings may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated under recommended operating conditions is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability. NOTES:. Maximum power dissipation is a function of T J (max), θ JA, and T A. The maximum allowable power dissipation at any allowable ambient temperature is P D = (T J (max) T A )/θ JA. Operating at the absolute maximum T J of 5 C can affect reliability. 2. The package thermal impedance is calculated in accordance with JESD 5-7. recommended operating conditions T A Operating free-air temperature MIN MAX UNIT LT4C 7 C LT4I 4 85 electrical characteristics at specified free-air temperature PARAMETER TEST CONDITIONS LT4-.2 LT4-2.5 T A MIN TYP MAX MIN TYP MAX 25 C V Z Reference voltage I Z = µa Full LT4C V range LT4I VZ V Z V Z / t I Z (min) Average I Z = µa temperature coefficient of reference voltage I Z = 2 µa Change in reference voltage with current Long-term change in reference voltage Minimum reference current I Z = I Z (min) to ma I Z = mato2ma z z Reference impedance I Z = µaa V n Broadband noise voltage 25 C 2 25 C Full range C Full range UNIT ppm/ C I Z = µa 25 C 2 2 ppm/khr I Z = µa, f = Hz to khz mv Full range µa 25 C Full range C 6 2 µv Full range is C to 7 C for the LT4C and 4 C to 85 C for the LT4I. The average temperature coefficient of reference voltage is defined as the total change in reference voltage divided by the specified temperature range. Ω 4 POST OFFICE BOX DALLAS, TEXAS 75265

5 LT4-.2, LT4-2.5 TYPICAL CHARACTERISTICS SLVS22M JANUARY 989 REVISED MAY 28 Table of Graphs GRAPH TITLE FIGURE LT4x-.2 Reverse current Reverse voltage Reference-voltage change Reverse current 2 Forward voltage Forward current 3 Reference voltage Free-air temperature 4 Reference impedance Reference current 5 Noise voltage Frequency 6 Filtered output noise voltage Cutoff frequency 7 LT4x-2.5 Transient response 8 Reverse current Reverse voltage 9 Forward voltage Forward current Reference voltage Free-air temperature Reference impedance Reference current 2 Noise voltage Frequency 3 Filtered output noise voltage Cutoff frequency 4 Transient response 5 POST OFFICE BOX DALLAS, TEXAS

6 LT4-.2, LT4-2.5 SLVS22M JANUARY 989 REVISED MAY 28 TYPICAL CHARACTERISTICS LT4x-.2 REVERSE CURRENT REVERSE VOLTAGE ÎÎÎÎÎÎÎ T A = 55 C to 25 C 6 LT4x-.2 REFERENCE-VOLTAGE CHANGE REVERSE CURRENT ÎÎÎÎÎÎ T A = 55 C to 25 C I R Reverse Current µ A Reference Voltage Change mv V Z V R Reverse Voltage V I R Reverse Current ma Figure Figure 2.2 T A = 25 C LT4x-.2 FORWARD VOLTAGE FORWARD CURRENT.245 ÎÎÎÎÎ I Z = µa LT4x-.2 REFERENCE VOLTAGE FREE-AIR TEMPERATURE Forward Voltage V V F Reference Voltage V V Z I F Forward Current ma T A Free-Air Temperature C 5 25 Figure 3 Figure 4 Data at high and low temperatures are applicable only within the rated operating free-air temperature ranges of the various devices. 6 POST OFFICE BOX DALLAS, TEXAS 75265

7 LT4-.2, LT4-2.5 TYPICAL CHARACTERISTICS SLVS22M JANUARY 989 REVISED MAY 28 LT4x-.2 REFERENCE IMPEDANCE REFERENCE CURRENT ÎÎÎÎÎÎÎ f = 25 Hz T A = 55 C to 25 C 7 6 ÎÎÎÎ I Z = µa T A = 25 C LT4x-.2 NOISE VOLTAGE FREQUENCY Ω Reference Impedance z z V n Noise Voltage nv/ Hz k k k I Z Reference Current ma f Frequency Hz Figure 5 Figure 6 7 TL4x-.2 FILTERED OUTPUT NOISE VOLTAGE CUTOFF FREQUENCY LT4x-.2 TRANSIENT RESPONSE µv Filtered Output Noise Voltage I Z = µa ÎÎÎÎÎ T A = 25 C µa R C ÎÎÎÎÎ RC Low Pass Input and Output Voltages V V I Output 36 kω Input V O. 5 6 Cutoff Frequency khz t Time µs Figure 7 Figure 8 Data at high and low temperatures are applicable only within the rated operating free-air temperature ranges of the various devices. POST OFFICE BOX DALLAS, TEXAS

8 LT4-.2, LT4-2.5 SLVS22M JANUARY 989 REVISED MAY 28 TYPICAL CHARACTERISTICS T A = 55 C to 25 C LT4x-2.5 REVERSE CURRENT REVERSE VOLTAGE.2 ÎÎÎÎ T A = 25 C LT4x-2.5 FORWARD VOLTAGE FORWARD CURRENT I R Reverse Current µ A Forward Voltage V V F V R Reverse Voltage V I F Forward Current ma Figure 9 Figure ÎÎÎÎÎ I Z = µa LT4x-2.5 REFERENCE VOLTAGE FREE-AIR TEMPERATURE Reference Voltage V V Z T A Free-Air Temperature C 5 25 Figure Data at high and low temperatures are applicable only within the rated operating free-air temperature ranges of the various devices. 8 POST OFFICE BOX DALLAS, TEXAS 75265

9 LT4-.2, LT4-2.5 TYPICAL CHARACTERISTICS SLVS22M JANUARY 989 REVISED MAY 28 LT4x-2.5 REFERENCE IMPEDANCE REFERENCE CURRENT ÎÎÎÎÎÎ f = 25 Hz ÎÎÎÎÎÎ T A = 55 C to 25 C 4 2 ÎÎÎÎ I Z = µa T A = 25 C LT4x-2.5 NOISE VOLTAGE FREQUENCY Reference Impedance Ω z z V n Noise Voltage nv/ Hz k k k I Z Reference Current ma f Frequency Hz Figure 2 Figure 3 Filtered Output Noise Voltage µv TL4x-2.5 FILTERED OUTPUT NOISE VOLTAGE CUTOFF FREQUENCY I Z = µa ÎÎÎÎ T A = 25 C µa R C ÎÎÎÎÎ RC Low Pass Input and Output Voltages V LT4x-2.5 TRANSIENT RESPONSE V I Output 24 kω Input V O. 5 Cutoff Frequency khz t Time µs Figure 4 Figure 5 Data at high and low temperatures are applicable only within the rated operating free-air temperature ranges of the various devices. POST OFFICE BOX DALLAS, TEXAS

10 LT4-.2, LT4-2.5 SLVS22M JANUARY 989 REVISED MAY 28 APPLICATION INFORMATION pf 22 kω LT V 2 kω 24 V + LM3A 5 V Output 6.9 kω 6 µs RC 2 V.5 µf.5 kω TTL Input kω 2N kω % metal-film resistors 5 V Figure 6. V I(PP) Generator for EPROMs (No Trim Required) Network Detail YSI V RT Network YSI 442 Green 625 Ω Brown 2.7 kω 5% LT4-.2 kω.% /2 TLE Ω.% + /2 TLE kω V C C Red kω.% 68.3 Ω.% kω.% Figure 7. C-to- C Linear-Output Thermometer POST OFFICE BOX DALLAS, TEXAS 75265

11 LT4-.2, LT4-2.5 APPLICATION INFORMATION SLVS22M JANUARY 989 REVISED MAY 28 V+ LM334 R V I = 6.5 V to 5 V V 5.6 kω TLC27 6 V O = 5 V LT pf 3. MΩ % MΩ % Figure 8. Micropower 5-V Reference µa LT4-.2 V I 5 V 22 Ω + Output 5 µf 9 V 5 kω LT V Figure 9. Low-Noise Reference Figure 2. Micropower Reference From 9-V Battery kω R 3 V Lithium LT Ω 684 Ω 5 kω at 25 C 8 Ω + THERMOCOUPLE TYPE J K T S R 232 kω 298 kω 3 kω 2. MΩ + Quiescent current 5 µa Yellow Springs Inst. Co., Part #447 NOTE A: This application compensates within ± C from C to 6 C. Figure 2. Micropower Cold-Junction Compensation for Thermocouples POST OFFICE BOX DALLAS, TEXAS 75265

12 LT4-.2, LT4-2.5 SLVS22M JANUARY 989 REVISED MAY 28 APPLICATION INFORMATION 5 V 5 kω 2.5 V V I 8 V µf + IN LT84 OUT ADJ + LT4-2.5 µf 3 Ω % 5 V LT4-2.5 Ω % Figure V Reference Figure 23. High-Stability 5-V Regulator V CC+ 5 V 5 V 25 kω 25 kω 2 kω Output LT4-.2 Input R (see Note A) TLE N394 I O (see Note A) 5 V May be increased for small output currents 2 V NOTE A: R I O + µa, I O =.235 V R Figure 24. Ground-Referenced Current Source 2 kω LT kω V CC 5 V Figure 25. Amplifier With Constant Gain Over Temperature.5 V (see Note A) V+ LM334 R 3 kω.235 V LT4-.2 NOTE A: Output regulates down to.285 V for I O =. Figure V Reference From.5-V Battery 6.8 kω LT4-.2 I O R 5 kω.3 V R Figure 27. Terminal Current Source With Low Temperature Coefficient 2 POST OFFICE BOX DALLAS, TEXAS 75265

13 LT4-.2, LT4-2.5 APPLICATION INFORMATION SLVS22M JANUARY 989 REVISED MAY 28 Battery Output R % MΩ 2 V + 33 kω % TLC27 LO = Battery Low LT4-.2 R sets trip point, 6.4 kω per cell for.8 V per cell. Figure 28. Lead-Acid Low-Battery-Voltage Detector LT84 V I V I V O V O + ADJ µf 2 Ω + µf LT4-.2 R V CC V.5 R 2 kω V CC Figure 29. Variable-Voltage Supply POST OFFICE BOX DALLAS, TEXAS

14 PACKAGE OPTION ADDENDUM 8-Jun-27 PACKAGING INFORMATION Orderable Device Status () Package Type Package Drawing Pins Package Qty Eco Plan LT4CD--2 ACTIVE SOIC D 8 75 Green (RoHS LT4CD-2-5 ACTIVE SOIC D 8 75 Green (RoHS LT4CDG4--2 ACTIVE SOIC D 8 75 Green (RoHS LT4CDR--2 ACTIVE SOIC D 8 25 Green (RoHS LT4CDR-2-5 ACTIVE SOIC D 8 25 Green (RoHS LT4CDRG4-2-5 ACTIVE SOIC D 8 25 Green (RoHS LT4CPW--2 ACTIVE TSSOP PW 8 5 Green (RoHS LT4CPWR--2 ACTIVE TSSOP PW 8 2 Green (RoHS LT4CPWR-2-5 ACTIVE TSSOP PW 8 2 Green (RoHS LT4ID--2 ACTIVE SOIC D 8 75 Green (RoHS LT4ID-2-5 ACTIVE SOIC D 8 75 Green (RoHS LT4IDG4--2 ACTIVE SOIC D 8 75 Green (RoHS LT4IDG4-2-5 ACTIVE SOIC D 8 75 Green (RoHS LT4IDR--2 ACTIVE SOIC D 8 25 Green (RoHS LT4IDR-2-5 ACTIVE SOIC D 8 25 Green (RoHS LT4IDRE4-2-5 ACTIVE SOIC D 8 25 Green (RoHS LT4IDRG4--2 ACTIVE SOIC D 8 25 Green (RoHS (2) Lead/Ball Finish (6) MSL Peak Temp (3) Op Temp ( C) Device Marking (4/5) CU NIPDAU Level--26C-UNLIM 4C-2 CU NIPDAU Level--26C-UNLIM 4C-25 CU NIPDAU Level--26C-UNLIM to 7 4C-2 CU NIPDAU Level--26C-UNLIM 4C-2 CU NIPDAU Level--26C-UNLIM 4C-25 CU NIPDAU Level--26C-UNLIM to 7 4C-25 CU NIPDAU Level--26C-UNLIM -4 to 85 4C-2 CU NIPDAU Level--26C-UNLIM to 7 4C-2 CU NIPDAU Level--26C-UNLIM to 7 4C-25 CU NIPDAU Level--26C-UNLIM 4I-2 CU NIPDAU Level--26C-UNLIM 4I-25 CU NIPDAU Level--26C-UNLIM -4 to 85 4I-2 CU NIPDAU Level--26C-UNLIM -4 to 85 4I-25 CU NIPDAU Level--26C-UNLIM -4 to 85 4I-2 CU NIPDAU Level--26C-UNLIM 4I-25 CU NIPDAU Level--26C-UNLIM -4 to 85 4I-25 CU NIPDAU Level--26C-UNLIM -4 to 85 4I-2 Samples Addendum-Page

15 PACKAGE OPTION ADDENDUM 8-Jun-27 Orderable Device Status () Package Type Package Drawing Pins Package Qty Eco Plan LT4IPW--2 ACTIVE TSSOP PW 8 5 Green (RoHS LT4IPW-2-5 ACTIVE TSSOP PW 8 5 Green (RoHS LT4IPWR--2 ACTIVE TSSOP PW 8 2 Green (RoHS LT4IPWR-2-5 ACTIVE TSSOP PW 8 2 Green (RoHS (2) Lead/Ball Finish (6) MSL Peak Temp (3) Op Temp ( C) Device Marking (4/5) CU NIPDAU Level--26C-UNLIM -4 to 85 4I-2 CU NIPDAU Level--26C-UNLIM -4 to 85 4I-25 CU NIPDAU Level--26C-UNLIM -4 to 85 4I-2 CU NIPDAU Level--26C-UNLIM -4 to 85 4I-25 Samples () The marketing status values are defined as follows: ACTIVE: Product device recommended for new designs. LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect. NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in a new design. PREVIEW: Device has been announced but is not in production. Samples may or may not be available. OBSOLETE: TI has discontinued the production of the device. (2) RoHS: TI defines "RoHS" to mean semiconductor products that are compliant with the current EU RoHS requirements for all RoHS substances, including the requirement that RoHS substance do not exceed.% by weight in homogeneous materials. Where designed to be soldered at high temperatures, "RoHS" products are suitable for use in specified lead-free processes. TI may reference these types of products as "Pb-Free". RoHS Exempt: TI defines "RoHS Exempt" to mean products that contain lead but are compliant with EU RoHS pursuant to a specific EU RoHS exemption. Green: TI defines "Green" to mean the content of Chlorine (Cl) and Bromine (Br) based flame retardants meet JS79B low halogen requirements of <=ppm threshold. Antimony trioxide based flame retardants must also meet the <=ppm threshold requirement. (3) MSL, Peak Temp. - The Moisture Sensitivity Level rating according to the JEDEC industry standard classifications, and peak solder temperature. (4) There may be additional marking, which relates to the logo, the lot trace code information, or the environmental category on the device. (5) Multiple Device Markings will be inside parentheses. Only one Device Marking contained in parentheses and separated by a "~" will appear on a device. If a line is indented then it is a continuation of the previous line and the two combined represent the entire Device Marking for that device. (6) Lead/Ball Finish - Orderable Devices may have multiple material finish options. Finish options are separated by a vertical ruled line. Lead/Ball Finish values may wrap to two lines if the finish value exceeds the maximum column width. Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is provided. TI bases its knowledge and belief on information provided by third parties, and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better integrate information from third parties. TI has taken and continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals. TI and TI suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for release. Addendum-Page 2

16 PACKAGE OPTION ADDENDUM 8-Jun-27 In no event shall TI's liability arising out of such information exceed the total purchase price of the TI part(s) at issue in this document sold by TI to Customer on an annual basis. Addendum-Page 3

17 PACKAGE MATERIALS INFORMATION 5-Feb-26 TAPE AND REEL INFORMATION *All dimensions are nominal Device Package Type Package Drawing Pins SPQ Reel Diameter (mm) Reel Width W (mm) A (mm) B (mm) K (mm) P (mm) W (mm) Pin Quadrant LT4CDR--2 SOIC D Q LT4CDR--2 SOIC D Q LT4CDR-2-5 SOIC D Q LT4CPWR--2 TSSOP PW Q LT4CPWR-2-5 TSSOP PW Q LT4IDR--2 SOIC D Q LT4IDR-2-5 SOIC D Q LT4IPWR--2 TSSOP PW Q LT4IPWR-2-5 TSSOP PW Q Pack Materials-Page

18 PACKAGE MATERIALS INFORMATION 5-Feb-26 *All dimensions are nominal Device Package Type Package Drawing Pins SPQ Length (mm) Width (mm) Height (mm) LT4CDR--2 SOIC D LT4CDR--2 SOIC D LT4CDR-2-5 SOIC D LT4CPWR--2 TSSOP PW LT4CPWR-2-5 TSSOP PW LT4IDR--2 SOIC D LT4IDR-2-5 SOIC D LT4IPWR--2 TSSOP PW LT4IPWR-2-5 TSSOP PW Pack Materials-Page 2

19

20

21 SCALE 2.8 PW8A PACKAGE OUTLINE TSSOP -.2 mm max height SMALL OUTLINE PACKAGE 6.6 TYP 6.2 SEATING PLANE C A PIN ID AREA. C 8 6X NOTE 3 2X.95 4 B NOTE 4 5 8X.3.9. C A B.2 MAX SEE DETAIL A (.5) TYP.25 GAGE PLANE DETAIL A TYPICAL /A 2/25 NOTES:. All linear dimensions are in millimeters. Any dimensions in parenthesis are for reference only. Dimensioning and tolerancing per ASME Y4.5M. 2. This drawing is subject to change without notice. 3. This dimension does not include mold flash, protrusions, or gate burrs. Mold flash, protrusions, or gate burrs shall not exceed.5 mm per side. 4. This dimension does not include interlead flash. Interlead flash shall not exceed.25 mm per side. 5. Reference JEDEC registration MO-53, variation AA.

22 PW8A EXAMPLE BOARD LAYOUT TSSOP -.2 mm max height SMALL OUTLINE PACKAGE 8X (.45) 8X (.5) SYMM 8 (R.5) TYP SYMM 6X (.65) 4 5 (5.8) LAND PATTERN EXAMPLE SCALE:X SOLDER MASK OPENING METAL METAL UNDER SOLDER MASK SOLDER MASK OPENING.5 MAX ALL AROUND.5 MIN ALL AROUND NON SOLDER MASK DEFINED SOLDER MASK DEFINED SOLDER MASK DETAILS NOT TO SCALE /A 2/25 NOTES: (continued) 6. Publication IPC-735 may have alternate designs. 7. Solder mask tolerances between and around signal pads can vary based on board fabrication site.

23 PW8A EXAMPLE STENCIL DESIGN TSSOP -.2 mm max height SMALL OUTLINE PACKAGE 8X (.45) 8X (.5) SYMM 8 (R.5) TYP SYMM 6X (.65) 4 5 (5.8) SOLDER PASTE EXAMPLE BASED ON.25 mm THICK STENCIL SCALE:X /A 2/25 NOTES: (continued) 8. Laser cutting apertures with trapezoidal walls and rounded corners may offer better paste release. IPC-7525 may have alternate design recommendations. 9. Board assembly site may have different recommendations for stencil design.

24 IMPORTANT NOTICE Texas Instruments Incorporated (TI) reserves the right to make corrections, enhancements, improvements and other changes to its semiconductor products and services per JESD46, latest issue, and to discontinue any product or service per JESD48, latest issue. Buyers should obtain the latest relevant information before placing orders and should verify that such information is current and complete. TI s published terms of sale for semiconductor products ( apply to the sale of packaged integrated circuit products that TI has qualified and released to market. Additional terms may apply to the use or sale of other types of TI products and services. Reproduction of significant portions of TI information in TI data sheets is permissible only if reproduction is without alteration and is accompanied by all associated warranties, conditions, limitations, and notices. TI is not responsible or liable for such reproduced documentation. Information of third parties may be subject to additional restrictions. Resale of TI products or services with statements different from or beyond the parameters stated by TI for that product or service voids all express and any implied warranties for the associated TI product or service and is an unfair and deceptive business practice. TI is not responsible or liable for any such statements. Buyers and others who are developing systems that incorporate TI products (collectively, Designers ) understand and agree that Designers remain responsible for using their independent analysis, evaluation and judgment in designing their applications and that Designers have full and exclusive responsibility to assure the safety of Designers' applications and compliance of their applications (and of all TI products used in or for Designers applications) with all applicable regulations, laws and other applicable requirements. Designer represents that, with respect to their applications, Designer has all the necessary expertise to create and implement safeguards that () anticipate dangerous consequences of failures, (2) monitor failures and their consequences, and (3) lessen the likelihood of failures that might cause harm and take appropriate actions. Designer agrees that prior to using or distributing any applications that include TI products, Designer will thoroughly test such applications and the functionality of such TI products as used in such applications. TI s provision of technical, application or other design advice, quality characterization, reliability data or other services or information, including, but not limited to, reference designs and materials relating to evaluation modules, (collectively, TI Resources ) are intended to assist designers who are developing applications that incorporate TI products; by downloading, accessing or using TI Resources in any way, Designer (individually or, if Designer is acting on behalf of a company, Designer s company) agrees to use any particular TI Resource solely for this purpose and subject to the terms of this Notice. TI s provision of TI Resources does not expand or otherwise alter TI s applicable published warranties or warranty disclaimers for TI products, and no additional obligations or liabilities arise from TI providing such TI Resources. TI reserves the right to make corrections, enhancements, improvements and other changes to its TI Resources. TI has not conducted any testing other than that specifically described in the published documentation for a particular TI Resource. Designer is authorized to use, copy and modify any individual TI Resource only in connection with the development of applications that include the TI product(s) identified in such TI Resource. NO OTHER LICENSE, EXPRESS OR IMPLIED, BY ESTOPPEL OR OTHERWISE TO ANY OTHER TI INTELLECTUAL PROPERTY RIGHT, AND NO LICENSE TO ANY TECHNOLOGY OR INTELLECTUAL PROPERTY RIGHT OF TI OR ANY THIRD PARTY IS GRANTED HEREIN, including but not limited to any patent right, copyright, mask work right, or other intellectual property right relating to any combination, machine, or process in which TI products or services are used. Information regarding or referencing third-party products or services does not constitute a license to use such products or services, or a warranty or endorsement thereof. Use of TI Resources may require a license from a third party under the patents or other intellectual property of the third party, or a license from TI under the patents or other intellectual property of TI. TI RESOURCES ARE PROVIDED AS IS AND WITH ALL FAULTS. TI DISCLAIMS ALL OTHER WARRANTIES OR REPRESENTATIONS, EXPRESS OR IMPLIED, REGARDING RESOURCES OR USE THEREOF, INCLUDING BUT NOT LIMITED TO ACCURACY OR COMPLETENESS, TITLE, ANY EPIDEMIC FAILURE WARRANTY AND ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, AND NON-INFRINGEMENT OF ANY THIRD PARTY INTELLECTUAL PROPERTY RIGHTS. TI SHALL NOT BE LIABLE FOR AND SHALL NOT DEFEND OR INDEMNIFY DESIGNER AGAINST ANY CLAIM, INCLUDING BUT NOT LIMITED TO ANY INFRINGEMENT CLAIM THAT RELATES TO OR IS BASED ON ANY COMBINATION OF PRODUCTS EVEN IF DESCRIBED IN TI RESOURCES OR OTHERWISE. IN NO EVENT SHALL TI BE LIABLE FOR ANY ACTUAL, DIRECT, SPECIAL, COLLATERAL, INDIRECT, PUNITIVE, INCIDENTAL, CONSEQUENTIAL OR EXEMPLARY DAMAGES IN CONNECTION WITH OR ARISING OUT OF TI RESOURCES OR USE THEREOF, AND REGARDLESS OF WHETHER TI HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. Unless TI has explicitly designated an individual product as meeting the requirements of a particular industry standard (e.g., ISO/TS 6949 and ISO 26262), TI is not responsible for any failure to meet such industry standard requirements. Where TI specifically promotes products as facilitating functional safety or as compliant with industry functional safety standards, such products are intended to help enable customers to design and create their own applications that meet applicable functional safety standards and requirements. Using products in an application does not by itself establish any safety features in the application. Designers must ensure compliance with safety-related requirements and standards applicable to their applications. Designer may not use any TI products in life-critical medical equipment unless authorized officers of the parties have executed a special contract specifically governing such use. Life-critical medical equipment is medical equipment where failure of such equipment would cause serious bodily injury or death (e.g., life support, pacemakers, defibrillators, heart pumps, neurostimulators, and implantables). Such equipment includes, without limitation, all medical devices identified by the U.S. Food and Drug Administration as Class III devices and equivalent classifications outside the U.S. TI may expressly designate certain products as completing a particular qualification (e.g., Q, Military Grade, or Enhanced Product). Designers agree that it has the necessary expertise to select the product with the appropriate qualification designation for their applications and that proper product selection is at Designers own risk. Designers are solely responsible for compliance with all legal and regulatory requirements in connection with such selection. Designer will fully indemnify TI and its representatives against any damages, costs, losses, and/or liabilities arising out of Designer s noncompliance with the terms and provisions of this Notice. Mailing Address: Texas Instruments, Post Office Box 65533, Dallas, Texas Copyright 27, Texas Instruments Incorporated

Data sheet acquired from Harris Semiconductor SCHS038C Revised October 2003

Data sheet acquired from Harris Semiconductor SCHS038C Revised October 2003 Data sheet acquired from Harris Semiconductor SCHS038C Revised October 2003 The CD4035B types are supplied in 16-lead hermetic dual-in-line ceramic packages (F3A suffix), 16-lead dual-in-line plastic packages

More information

ORDERING INFORMATION T A PACKAGE ORDERABLE PART NUMBER. SOIC D Tape and reel SN74CBTD3306DR 40 C to85 C

ORDERING INFORMATION T A PACKAGE ORDERABLE PART NUMBER. SOIC D Tape and reel SN74CBTD3306DR 40 C to85 C 5-Ω Switch Connection Between Two Ports TTL-Compatible Input Levels Designed to Be Used in Level-Shifting Applications description/ordering information The SN74CBTD3306 features two independent line switches.

More information

2.5-V INTEGRATED REFERENCE CIRCUIT

2.5-V INTEGRATED REFERENCE CIRCUIT 1 1FEATURES Excellent Temperature Stability Wide Operating Current Range Initial Tolerance: 0.2% Max Directly Interchangeable With LM136 Dynamic Impedance: 0.6 Ω Max Needs No Adjustment for Minimum Temperature

More information

Data sheet acquired from Harris Semiconductor SCHS083B Revised March 2003

Data sheet acquired from Harris Semiconductor SCHS083B Revised March 2003 Data sheet acquired from Harris Semiconductor SCHS083B Revised March 2003 The CD4536B types are supplied in 16-lead hermetic dual-in-line ceramic packages (F3A suffix), 16-lead dual-in-line plastic packages

More information

description/ordering information

description/ordering information 3-Terminal Regulators Output Current Up To 100 ma No External Components Required Internal Thermal-Overload Protection Internal Short-Circuit Current Limiting Direct Replacement for Industry-Standard MC79L00

More information

AVAILABLE OPTIONS PACKAGE SMALL OUTLINE (D) The D package is available taped and reeled. Add the suffix R to the device type (i.e., LT1030CDR).

AVAILABLE OPTIONS PACKAGE SMALL OUTLINE (D) The D package is available taped and reeled. Add the suffix R to the device type (i.e., LT1030CDR). LT1030C QUADRUPLE LOW-POWER LINE DRIVER Low Supply Voltage... ±5 V to ±15 V Supply Current...500 µa Typical Zero Supply Current When Shut Down Outputs Can Be Driven ±30 V Output Open When Off (3-State)

More information

LP324, LP2902 ULTRA-LOW-POWER QUADRUPLE OPERATIONAL AMPLIFIERS

LP324, LP2902 ULTRA-LOW-POWER QUADRUPLE OPERATIONAL AMPLIFIERS www.ti.com FEATURES Low Supply Current... 85 µa Typ Low Offset Voltage... 2 mv Typ Low Input Bias Current... 2 na Typ Input Common Mode to GND Wide Supply Voltage... 3 V < V CC < 32 V Pin Compatible With

More information

GENERAL-PURPOSE LOW-VOLTAGE COMPARATORS

GENERAL-PURPOSE LOW-VOLTAGE COMPARATORS 1 LMV331-Q1 SINGLE, LMV393-Q1 DUAL SLOS468D MAY 2005 REVISED AUGUST 2011 GENERAL-PURPOSE LOW-VOLTAGE COMPARATORS Check for Samples: LMV331-Q1 SINGLE, LMV393-Q1 DUAL 1FEATURES Qualified for Automotive Applications

More information

TL780 SERIES POSITIVE-VOLTAGE REGULATORS

TL780 SERIES POSITIVE-VOLTAGE REGULATORS FEATURES TL780 SERIES POSITIVE-VOLTAGE REGULATORS SLVS055M APRIL 1981 REVISED OCTOBER 2006 ±1% Output Tolerance at 25 C Internal Short-Circuit Current Limiting ±2% Output Tolerance Over Full Operating

More information

SN75157 DUAL DIFFERENTIAL LINE RECEIVER

SN75157 DUAL DIFFERENTIAL LINE RECEIVER SN75157 DUAL DIFFERENTIAL LINE RECEIVER Meets or Exceeds the Requirements of ANSI Standards EIA/TIA-422-B and EIA/TIA-423-B and ITU Recommendation V.1 and V.11 Operates From Single 5-V Power Supply Wide

More information

description/ordering information

description/ordering information µ SLVS060K JUNE 1976 REVISED APRIL 2005 3-Terminal Regulators Output Current Up To 500 ma No External Components High Power-Dissipation Capability Internal Short-Circuit Current Limiting Output Transistor

More information

ORDERING INFORMATION. SOIC DW Tape and reel SN74CBT3384ADWR

ORDERING INFORMATION. SOIC DW Tape and reel SN74CBT3384ADWR SN74CBT3384A 10-BIT FET BUS SWITCH SCDS004L NOVEMBER 1992 REVISED JANUARY 2004 5-Ω Switch Connection Between Two Ports TTL-Compatible Input Levels description/ordering information The SN74CBT3384A provides

More information

ORDERING INFORMATION ORDERABLE PART NUMBER SN74CBTS3306PWR

ORDERING INFORMATION ORDERABLE PART NUMBER SN74CBTS3306PWR 5-Ω Switch Connection Between Two Ports TTL-Compatible Input Levels description/ordering information The SN74CBTS3306 features independent line switches with Schottky diodes on the I/Os to clamp undershoot.

More information

ORDERING INFORMATION. QFN RGY Tape and reel SN74CBT3257RGYR CU257. SOIC D Tape and reel SN74CBT3257DR

ORDERING INFORMATION. QFN RGY Tape and reel SN74CBT3257RGYR CU257. SOIC D Tape and reel SN74CBT3257DR SN74CBT3257 4-BIT 1-OF-2 FET MULTIPLEXER/DEMULTIPLEXER SCDS017M MAY 1995 REVISED JANUARY 2004 5-Ω Switch Connection Between Two Ports TTL-Compatible Input Levels D, DB, DBQ, OR PW PACKAGE (TOP VIEW) RGY

More information

LOW-DROPOUT VOLTAGE REGULATORS

LOW-DROPOUT VOLTAGE REGULATORS 1 TL750L TL751L www.ti.com... SLVS017U SEPTEMBER 1987 REVISED SEPTEMBER 2009 LOW-DROPOUT VOLTAGE REGULATORS 1FEATURES Very Low Dropout Voltage, Less Than 0.6 V at Reverse Transient Protection Down to 50

More information

LM2900, LM3900 QUADRUPLE NORTON OPERATIONAL AMPLIFIERS

LM2900, LM3900 QUADRUPLE NORTON OPERATIONAL AMPLIFIERS LM29, LM39 QUADRUPLE NORTON OPERATIONAL AMPLIFIERS SLOS59 JULY 1979 REVISED SEPTEMBER 199 Wide Range of Supply Voltages, Single or Dual Supplies Wide Bandwidth Large Output Voltage Swing Output Short-Circuit

More information

PACKAGE OPTION ADDENDUM www.ti.com 17-Mar-2017 PACKAGING INFORMATION Orderable Device Status (1) Package Type Package Drawing Pins Package Qty Eco Plan (2) Lead/Ball Finish (6) MSL Peak Temp (3) Op Temp

More information

ua9637ac DUAL DIFFERENTIAL LINE RECEIVER

ua9637ac DUAL DIFFERENTIAL LINE RECEIVER ua9637ac DUAL DIFFERENTIAL LINE RECEIVER Meets or Exceeds the Requirements of ANSI Standards EIA/TIA-422-B and EIA/TIA-423-B and ITU Recommendations V.10 and V.11 Operates From Single 5-V Power Supply

More information

LF411 JFET-INPUT OPERATIONAL AMPLIFIER

LF411 JFET-INPUT OPERATIONAL AMPLIFIER LF411 JFET-INPUT OPERATIONAL AMPLIFIER Low Input Bias Current, 50 pa Typ Low Input Noise Current, 0.01 pa/ Hz Typ Low Supply Current, 2 ma Typ High Input impedance, 10 12 Ω Typ Low Total Harmonic Distortion

More information

SN75150 DUAL LINE DRIVER

SN75150 DUAL LINE DRIVER SN75150 DUAL LINE DRIVER Meets or Exceeds the Requirement of TIA/EIA-232-F and ITU Recommendation V.28 Withstands Sustained Output Short Circuit to Any Low-Impedance Voltage Between 25 V and 25 V 2-µs

More information

SN74LV04A-Q1 HEX INVERTER

SN74LV04A-Q1 HEX INVERTER SN74LV04A-Q1 HEX INVERTER Qualified for Automotive Applications ESD Protection Exceeds 2000 V Per MIL-STD-883, Method 3015; Exceeds 200 V Using Machine Model (C = 200 pf, R = 0) 2-V to 5.5-V Operation

More information

CD54/74AC283, CD54/74ACT283

CD54/74AC283, CD54/74ACT283 Data sheet acquired from Harris Semiconductor SCHS251D August 1998 - Revised May 2000 Features Buffered Inputs Exceeds 2kV ESD Protection MIL-STD-883, Method 3015 SCR-Latchup-Resistant CMOS Process and

More information

74ACT11244 OCTAL BUFFER/LINE DRIVER WITH 3-STATE OUTPUTS

74ACT11244 OCTAL BUFFER/LINE DRIVER WITH 3-STATE OUTPUTS 3-State Outputs Drive Bus Lines or Buffer Memory Address Registers Inputs Are TTL-Voltage Compatible Flow-Through Architecture Optimizes PCB Layout Center-Pin V CC and GND Configurations to Minimize High-Speed

More information

CD74AC251, CD74ACT251

CD74AC251, CD74ACT251 Data sheet acquired from Harris Semiconductor SCHS246 August 1998 CD74AC251, CD74ACT251 8-Input Multiplexer, Three-State Features Buffered Inputs Typical Propagation Delay - 6ns at V CC = 5V, T A = 25

More information

AVAILABLE OPTIONS PACKAGE VIOmax SMALL OUTLINE. PLASTIC DIP at 25 C (D) (P) 0 C to 70 C 5 mv LM306D LM306P

AVAILABLE OPTIONS PACKAGE VIOmax SMALL OUTLINE. PLASTIC DIP at 25 C (D) (P) 0 C to 70 C 5 mv LM306D LM306P SLCS8A OCTOBER 979 REVISED OCTOBER 99 Fast Response Times Improved Gain and Accuracy Fanout to Series 5/7 TTL Loads Strobe Capability Short-Circuit and Surge Protection Designed to Be Interchangeable With

More information

ORDERING INFORMATION PACKAGE

ORDERING INFORMATION PACKAGE 5-Ω Switch Connection Between Two Ports TTL-Compatible Input Levels Designed to Be Used in Level-Shifting Applications description/ordering information The SN74CBTD3861 provides ten bits of high-speed

More information

SN54AC04, SN74AC04 HEX INVERTERS

SN54AC04, SN74AC04 HEX INVERTERS SN54AC04, SN74AC04 HEX INVERTERS 2-V to 6-V V CC Operation Inputs Accept Voltages to 6 V Max t pd of 7 ns at 5 V SN54AC04...J OR W PACKAGE SN74AC04...D, DB, N, NS, OR PW PACKAGE (TOP VIEW) 1A 1Y 2A 2Y

More information

description block diagram

description block diagram Fast Transient Response 10-mA to 3-A Load Current Short Circuit Protection Maximum Dropout of 450-mV at 3-A Load Current Separate Bias and VIN Pins Available in Adjustable or Fixed-Output Voltages 5-Pin

More information

1 to 4 Configurable Clock Buffer for 3D Displays

1 to 4 Configurable Clock Buffer for 3D Displays 1 S3 GND S4 4 5 6 CLKIN 3 CLKOUT3 S1 2 Top View CLKOUT4 S2 1 7 8 9 OE 12 11 10 CLKOUT1 VDD CLKOUT2 CDC1104 SCAS921 SEPTEMBER 2011 1 to 4 Configurable Clock Buffer for 3D Displays Check for Samples: CDC1104

More information

Technical Documents. SLPS532A MARCH 2015 REVISED DECEMBER 2017 CSD18536KCS 60 V N-Channel NexFET Power MOSFET

Technical Documents. SLPS532A MARCH 2015 REVISED DECEMBER 2017 CSD18536KCS 60 V N-Channel NexFET Power MOSFET Product Folder Order Now Technical Documents Tools & Software Support & Community Features Ultra-Low Q g and Q gd Low Thermal Resistance Avalanche Rated Pb-Free Terminal Plating RoHS Compliant Halogen

More information

3.3 V Dual LVTTL to DIfferential LVPECL Translator

3.3 V Dual LVTTL to DIfferential LVPECL Translator 1 SN65LVELT22 www.ti.com... SLLS928 DECEMBER 2008 3.3 V Dual LVTTL to DIfferential LVPECL Translator 1FEATURES 450 ps (typ) Propagation Delay Operating Range: V CC 3.0 V to 3.8 with GND = 0 V

More information

CD74HC4017-Q1 HIGH-SPEED CMOS LOGIC DECADE COUNTER/DIVIDER WITH 10 DECODED OUTPUTS

CD74HC4017-Q1 HIGH-SPEED CMOS LOGIC DECADE COUNTER/DIVIDER WITH 10 DECODED OUTPUTS Qualified for Automotive Applications Fully Static Operation Buffered Inputs Common Reset Positive Edge Clocking Typical f MAX = 60 MHz at = 5 V, = 5 pf, T A = 25 C Fanout (Over Temperature Range) Standard

More information

SN75158 DUAL DIFFERENTIAL LINE DRIVER

SN75158 DUAL DIFFERENTIAL LINE DRIVER SN7558 DUAL DIFFERENTIAL LINE DRIVER Meets or Exceeds the Requirements of ANSI EIA/TIA-422-B and ITU Recommendation V. Single 5-V Supply Balanced-Line Operation TTL Compatible High Output Impedance in

More information

description/ordering information

description/ordering information µ SLVS060K JUNE 1976 REVISED APRIL 2005 3-Terminal Regulators Output Current Up To 500 ma No External Components High Power-Dissipation Capability Internal Short-Circuit Current Limiting Output Transistor

More information

SN74CBT3861DWR 10-BIT FET BUS SWITCH. description. logic diagram (positive logic)

SN74CBT3861DWR 10-BIT FET BUS SWITCH. description. logic diagram (positive logic) SN74CBT3861 10-BIT FET BUS SWITCH SCDS061D APRIL 1998 REVISED OCTOBER 2000 5-Ω Switch Connection Between Two Ports TTL-Compatible Input Levels Latch-Up Performance Exceeds 250 ma Per JESD 17 description

More information

VOLTAGE PROTECTION FOR 2-, 3-, OR 4-CELL Lion BATTERIES (2 nd PROTECTION)

VOLTAGE PROTECTION FOR 2-, 3-, OR 4-CELL Lion BATTERIES (2 nd PROTECTION) Not Recommended for New Designs: bq900, bq900a, bq90 FEATURES FUNCTION -, -, or -Cell Secondary Protection Each cell in a multiple cell pack is compared to an Low Power Consumption I CC < µa internal reference

More information

ORDERING INFORMATION. QFN RGY Tape and reel SN74CBT3257RGYR CU257. SOIC D Tape and reel SN74CBT3257DR

ORDERING INFORMATION. QFN RGY Tape and reel SN74CBT3257RGYR CU257. SOIC D Tape and reel SN74CBT3257DR SN74CBT3257 4-BIT 1-OF-2 FET MULTIPLEXER/DEMULTIPLEXER SCDS017M MAY 1995 REVISED JANUARY 2004 5-Ω Switch Connection Between Two Ports TTL-Compatible Input Levels D, DB, DBQ, OR PW PACKAGE (TOP VIEW) RGY

More information

High-Side, Bidirectional CURRENT SHUNT MONITOR

High-Side, Bidirectional CURRENT SHUNT MONITOR High-Side, Bidirectional CURRENT SHUNT MONITOR SBOS193D MARCH 2001 REVISED JANUARY 200 FEATURES COMPLETE BIDIRECTIONAL CURRENT MEASUREMENT CIRCUIT WIDE SUPPLY RANGE: 2.7V to 0V SUPPLY-INDEPENDENT COMMON-MODE

More information

SN74LVC1G32-Q1 SINGLE 2-INPUT POSITIVE-OR GATE

SN74LVC1G32-Q1 SINGLE 2-INPUT POSITIVE-OR GATE FEATURES Qualified for Automotive Applications Customer-Specific Configuration Control Can Be Supported Along With Major-Change Approval Supports 5-V V CC Operation Inputs Accept Voltages to 5.5 V Low

More information

PRECISION MICROPOWER SHUNT VOLTAGE REFERENCE

PRECISION MICROPOWER SHUNT VOLTAGE REFERENCE CATHODE DBZ (SOT-23) PACKAGE (TOP VIEW) ANODE 2 * Pin 3 is attached to substrate and must be connected to ANODE or left open. 3* LM4040-EP SLOS746A SEPTEMBER 20 REVISED SEPTEMBER 20 PRECISION MICROPOWER

More information

±24-mA Output Drive at 3.3 V Operates from 1.65 V to 3.6 V Latch-Up Performance Exceeds 250 ma Per Max t pd of 3.4 ns at 3.

±24-mA Output Drive at 3.3 V Operates from 1.65 V to 3.6 V Latch-Up Performance Exceeds 250 ma Per Max t pd of 3.4 ns at 3. www.ti.com SN74ALVC245 OCTAL BUS TRANSCEIVER WITH 3-STATE OUTPUTS SCES271D APRIL 1999 REVISED JULY 2004 FEATURES ±24-mA Output Drive at 3.3 V Operates from 1.65 V to 3.6 V Latch-Up Performance Exceeds

More information

+5V Precision VOLTAGE REFERENCE

+5V Precision VOLTAGE REFERENCE REF2 REF2 REF2 +V Precision VOLTAGE REFERENCE SBVS3B JANUARY 1993 REVISED JANUARY 2 FEATURES OUTPUT VOLTAGE: +V ±.2% max EXCELLENT TEMPERATURE STABILITY: 1ppm/ C max ( 4 C to +8 C) LOW NOISE: 1µV PP max

More information

ORDERING INFORMATION. TOP-SIDE MARKING PDIP N Tube SN74S1051N SN74S1051N

ORDERING INFORMATION. TOP-SIDE MARKING PDIP N Tube SN74S1051N SN74S1051N Designed to Reduce Reflection Noise Repetitive Peak Forward Current to 200 ma 12-Bit Array Structure Suited for Bus-Oriented Systems description/ordering information This Schottky barrier diode bus-termination

More information

description/ordering information

description/ordering information AC Types Feature 1.5-V to 5.5-V Operation and Balanced Noise Immunity at 30% of the Supply Speed of Bipolar F, AS, and S, With Significantly Reduced Power Consumption Balanced Propagation Delays ±24-mA

More information

TL4581 DUAL LOW-NOISE HIGH-DRIVE OPERATIONAL AMPLIFIER

TL4581 DUAL LOW-NOISE HIGH-DRIVE OPERATIONAL AMPLIFIER TL4581 DUAL LOW-NOISE HIGH-DRIVE OPERATIONAL AMPLIFIER SLVS457A JANUARY 2003 REVISED MARCH 2003 Equivalent Input Noise Voltage 5 nv/ Hz Typ at 1 khz Unity-Gain Bandwidth... 10 MHz Typ High Slew Rate...9

More information

ORDERING INFORMATION. QFN RGY Tape and reel SN74CBT3253RGYR CU253. SOIC D Tape and reel SN74CBT3253DR

ORDERING INFORMATION. QFN RGY Tape and reel SN74CBT3253RGYR CU253. SOIC D Tape and reel SN74CBT3253DR SN74CBT3253 DUAL 1-OF-4 FET MULTIPLEXER/DEMULTIPLEXER TTL-Compatible Input Levels D, DB, DBQ, OR PW PACKAGE (TOP VIEW) SCDS018O MAY 1995 REVISED JANUARY 2004 RGY PACKAGE (TOP VIEW) 1OE S1 1B4 1B3 1B2 1B1

More information

SINGLE BUS BUFFER GATE WITH 3-STATE OUTPUT

SINGLE BUS BUFFER GATE WITH 3-STATE OUTPUT 1 SN74LVC1G126-Q1 www.ti.com... SCES467B JULY 2003 REVISED APRIL 2008 SINGLE BUS BUFFER GATE WITH 3-STATE OUTPUT 1FEATURES Qualified for Automotive Applications ESD Protection Exceeds 2000 V Per MIL-STD-883,

More information

CD54HC4049, CD74HC4049, CD54HC4050, CD74HC4050

CD54HC4049, CD74HC4049, CD54HC4050, CD74HC4050 CD54HC4049, CD74HC4049, CD54HC4050, CD74HC4050 Data sheet acquired from Harris Semiconductor SCHS205I February 1998 - Revised February 2005 High-Speed CMOS Logic Hex Buffers, Inverting and Non-Inverting

More information

SINGLE BUS BUFFER GATE WITH 3-STATE OUTPUT

SINGLE BUS BUFFER GATE WITH 3-STATE OUTPUT 1 SN74LVC1G125-Q1... SGES002C APRIL 2003 REVISED APRIL 2008 SINGLE BUS BUFFER GATE WITH 3-STATE OUTPUT 1FEATURES Qualified for Automotive Applications Latch-Up Performance Exceeds 100 ma Per Supports 5-V

More information

description/ordering information

description/ordering information SCAS528D AUGUST 1995 REVISED OCTOBER 2003 2-V to 6-V V CC Operation Inputs Accept Voltages to 6 V Max t pd of 7.5 ns at 5 V SN54AC32...J OR W PACKAGE SN74AC32... D, DB, N, NS, OR PW PACKAGE (TOP VIEW)

More information

description/ordering information

description/ordering information SLVS053D FEBRUARY 1988 REVISED NOVEMBER 2003 Complete PWM Power-Control Function Totem-Pole Outputs for 200-mA Sink or Source Current Output Control Selects Parallel or Push-Pull Operation Internal Circuitry

More information

SN74LVC138A-Q1 3-LINE TO 8-LINE DECODER/DEMULTIPLEXER SCAS708B SEPTEMBER 2003 REVISED FEBRUARY 2008

SN74LVC138A-Q1 3-LINE TO 8-LINE DECODER/DEMULTIPLEXER SCAS708B SEPTEMBER 2003 REVISED FEBRUARY 2008 1 1FEATURES Qualified for Automotive Applications ESD Protection Exceeds 2000 V Per MIL-STD-883, Method 3015; Exceeds 200 V Using Machine Model (C = 200 pf, R = 0) Operates From 2 V to 3.6 V Inputs Accept

More information

Precision Gain = 10 DIFFERENTIAL AMPLIFIER

Precision Gain = 10 DIFFERENTIAL AMPLIFIER Precision Gain = 0 DIFFERENTIAL AMPLIFIER SBOSA AUGUST 987 REVISED OCTOBER 00 FEATURES ACCURATE GAIN: ±0.0% max HIGH COMMON-MODE REJECTION: 8dB min NONLINEARITY: 0.00% max EASY TO USE PLASTIC 8-PIN DIP,

More information

Undershoot Protection for OFF Isolation on A Control Inputs Can Be Driven by TTL or. ) Characteristics Latch-Up Performance Exceeds 100 ma Per (r on

Undershoot Protection for OFF Isolation on A Control Inputs Can Be Driven by TTL or. ) Characteristics Latch-Up Performance Exceeds 100 ma Per (r on FEATURES SN74CBT3305C DUAL FET BUS SWITCH 5-V BUS SWITCH WITH 2-V UNDERSHOOT PROTECTION D, DGK, OR PW PACKAGE (TOP VIEW) SCDS125B SEPTEMBER 2003 REVISED AUGUST 2005 Undershoot Protection for OFF Isolation

More information

MC3303, MC3403 QUADRUPLE LOW-POWER OPERATIONAL AMPLIFIERS

MC3303, MC3403 QUADRUPLE LOW-POWER OPERATIONAL AMPLIFIERS MC3303, MC3403 QUADRUPLE LOW-POWER OPERATIONAL AMPLIFIERS SLOS101C FEBRUARY 1979 REVISED FEBRUARY 2002 Wide Range of Supply Voltages, Single Supply...3 V to 36 V or Dual Supplies Class AB Output Stage

More information

SN75207B DUAL SENSE AMPLIFIER FOR MOS MEMORIES OR DUAL HIGH-SENSITIVITY LINE RECEIVERS

SN75207B DUAL SENSE AMPLIFIER FOR MOS MEMORIES OR DUAL HIGH-SENSITIVITY LINE RECEIVERS Plug-In Replacement for SN75107A and SN75107B With Improved Characteristics ± 10-mV Input Sensitivity TTL-Compatible Circuitry Standard Supply Voltages... ±5 V Differential Input Common-Mode Voltage Range

More information

PRECISION VOLTAGE REGULATORS

PRECISION VOLTAGE REGULATORS PRECISION LTAGE REGULATORS 150-mA Load Current Without External Power Transistor Adjustable Current-Limiting Capability Input Voltages up to 40 V Output Adjustable From 2 V to 37 V Direct Replacement for

More information

P-Channel NexFET Power MOSFET

P-Channel NexFET Power MOSFET CSD252W5 www.ti.com SLPS269A JUNE 2 REVISED JULY 2 P-Channel NexFET Power MOSFET Check for Samples: CSD252W5 FEATURES PRODUCT SUMMARY V DS Drain to Drain Voltage 2 V Low Resistance Q g Gate Charge Total

More information

SN75124 TRIPLE LINE RECEIVER

SN75124 TRIPLE LINE RECEIVER SN75124 TRIPLE LINE RECEIER Meets or Exceeds the Requirements of IBM System 360 Input/Output Interface Specification Operates From Single 5- Supply TTL Compatible Built-In Input Threshold Hysteresis High

More information

Supports Partial-Power Down Mode 4.5-V to 5.5-V V Operation. (Output Ground Bounce) <0.8 V at V ESD Protection Exceeds JESD 22

Supports Partial-Power Down Mode 4.5-V to 5.5-V V Operation. (Output Ground Bounce) <0.8 V at V ESD Protection Exceeds JESD 22 www.ti.com FEATURES SN74LV138AT 3-LINE TO 8-LINE DECODER/DEMULTIPLEXER SCLS691 AUGUST 2005 Inputs Are TTL-Voltage Compatible I off Supports Partial-Power Down Mode 4.5-V to 5.5-V V Operation CC Operation

More information

ORDERING INFORMATION. SOP NS Reel of 2000 SN74LVC861ANSR LVC861A SSOP DB Reel of 2000 SN74LVC861ADBR LC861A

ORDERING INFORMATION. SOP NS Reel of 2000 SN74LVC861ANSR LVC861A SSOP DB Reel of 2000 SN74LVC861ADBR LC861A www.ti.com FEATURES Operates From 1.65 V to 3.6 V Inputs Accept Voltages to 5.5 V Max t pd of 6.4 ns at 3.3 V Typical V OLP (Output Ground Bounce)

More information

5-V/3.3-V CMOS Outputs 5-V/3.3-V Input Down to 2.5-V Output Level I off Supports Partial-Power-Down Mode Shift With 2.5-V V CC

5-V/3.3-V CMOS Outputs 5-V/3.3-V Input Down to 2.5-V Output Level I off Supports Partial-Power-Down Mode Shift With 2.5-V V CC SN74CB3T3257 4-BIT 1-OF-2 FET MULTIPLEXER/DEMULTIPLEXER 2.5-V/3.3-V LOW-VOLTAGE BUS SWITCH WITH 5-V-TOLERANT LEVEL SHIFTER FEATURES Low Power Consumption (I CC = 20 µa Max) Output Voltage Translation Tracks

More information

CD54/74AC280, CD54/74ACT280

CD54/74AC280, CD54/74ACT280 CD54/74AC280, CD54/74ACT280 Data sheet acquired from Harris Semiconductor SCHS250A August 1998 - Revised May 2000 9-Bit Odd/Even Parity Generator/Checker Features Buffered Inputs Typical Propagation Delay

More information

UC1842A-EP, UC1843A-EP, UC1844A-EP, UC1845A-EP CURRENT-MODE PWM CONTROLLER

UC1842A-EP, UC1843A-EP, UC1844A-EP, UC1845A-EP CURRENT-MODE PWM CONTROLLER Controlled Baseline One Assembly/Test Site, One Fabrication Site Extended Temperature Performance of 55 C to 125 C Enhanced Diminishing Manufacturing Sources (DMS) Support Enhanced Product Change Notification

More information

5-V Dual Differential PECL Buffer-to-TTL Translator

5-V Dual Differential PECL Buffer-to-TTL Translator 1 1FEATURES Dual 5-V Differential PECL-to-TTL Buffer 24-mA TTL Ouputs Operating Range PECL V CC = 4.75 V to 5.25 V with GND = 0 V Support for Clock Frequencies of 250 MHz (TYP) 3.5-ns Typical Propagation

More information

TLC7701-Q1, TLC7705-Q1, TLC7733-Q1 MICROPOWER SUPPLY VOLTAGE SUPERVISORS

TLC7701-Q1, TLC7705-Q1, TLC7733-Q1 MICROPOWER SUPPLY VOLTAGE SUPERVISORS Qualified for Automotive Applications Power-On Reset Generator Automatic Reset Generation After Voltage Drop Precision Voltage Sensor Temperature-Compensated Voltage Reference Programmable Delay Time by

More information

ORDERING INFORMATION. TOP-SIDE MARKING PDIP N Tube SN74S1051N SN74S1051N

ORDERING INFORMATION. TOP-SIDE MARKING PDIP N Tube SN74S1051N SN74S1051N Designed to Reduce Reflection Noise Repetitive Peak Forward Current to 200 ma 12-Bit Array Structure Suited for Bus-Oriented Systems description/ordering information This Schottky barrier diode bus-termination

More information

DUAL RS-232 DRIVER/RECEIVER WITH IEC PROTECTION

DUAL RS-232 DRIVER/RECEIVER WITH IEC PROTECTION 1 TRS232E www.ti.com... SLLS791C JUNE 2007 REVISED SEPTEMBER 2008 DUAL RS-232 DRIVER/RECEIVER WITH IEC61000-4-2 PROTECTION 1FEATURES 2 Meets or Exceeds TIA/RS-232-F and ITU Recommendation V.28 Operates

More information

5-V PECL-to-TTL Translator

5-V PECL-to-TTL Translator 1 SN65ELT21 www.ti.com... SLLS923 JUNE 2009 5-V PECL-to-TTL Translator 1FEATURES 3ns (TYP) Propagation Delay Operating Range: V CC = 4.2 V to 5.7 V with GND = 0 V 24-mA TTL Output Deterministic Output

More information

Dual Voltage Detector with Adjustable Hysteresis

Dual Voltage Detector with Adjustable Hysteresis TPS3806J20 Dual Voltage Detector with Adjustable Hysteresis SLVS393A JULY 2001 REVISED NOVEMBER 2004 FEATURES DESCRIPTION Dual Voltage Detector With Adjustable The TPS3806 integrates two independent voltage

More information

SN74LV374A-Q1 OCTAL EDGE-TRIGGERED D-TYPE FLIP-FLOP WITH 3-STATE OUTPUTS

SN74LV374A-Q1 OCTAL EDGE-TRIGGERED D-TYPE FLIP-FLOP WITH 3-STATE OUTPUTS Qualified for Automotive Applications Typical V OLP (Output Ground Bounce) 2.3 V at = 3.3 V, T A = 25 C Supports Mixed-Mode Voltage

More information

TPS TPS3803G15 TPS3805H33 VOLTAGE DETECTOR APPLICATIONS FEATURES DESCRIPTION

TPS TPS3803G15 TPS3805H33 VOLTAGE DETECTOR APPLICATIONS FEATURES DESCRIPTION VOLTAGE DETECTOR TPS8 1 TPS8G15 TPS85H SLVS92A JULY 21 REVISED JUNE 27 FEATURES Single Voltage Detector (TPS8): Adjustable/1.5 V Dual Voltage Detector (TPS85): Adjustable/. V High ±1.5% Threshold Voltage

More information

SN74AUC1G02 SINGLE 2-INPUT POSITIVE-NOR GATE

SN74AUC1G02 SINGLE 2-INPUT POSITIVE-NOR GATE FEATURES SN74AUC1G02 SINGLE 2-INPUT POSITIVE-NOR GATE SCES369P SEPTEMBER 2001 REVISED MARCH 2007 Available in the Texas Instruments Low Power Consumption, 10-µA Max I CC NanoFree Package ±8-mA Output Drive

More information

CD54HC4015, CD74HC4015

CD54HC4015, CD74HC4015 CD54HC4015, CD74HC4015 Data sheet acquired from Harris Semiconductor SCHS198C November 1997 - Revised May 2003 High Speed CMOS Logic Dual 4-Stage Static Shift Register [ /Title (CD74 HC401 5) /Subject

More information

LM317M 3-TERMINAL ADJUSTABLE REGULATOR

LM317M 3-TERMINAL ADJUSTABLE REGULATOR FEATURES Output Voltage Range Adjustable From 1.25 V to 37 V Output Current Greater Than 5 ma Internal Short-Circuit Current Limiting Thermal-Overload Protection Output Safe-Area Compensation Q Devices

More information

SN74CB3T3253 DUAL 1-OF-4 FET MULTIPLEXER/DEMULTIPLEXER 2.5-V/3.3-V LOW-VOLTAGE BUS SWITCH WITH 5-V TOLERANT LEVEL SHIFTER

SN74CB3T3253 DUAL 1-OF-4 FET MULTIPLEXER/DEMULTIPLEXER 2.5-V/3.3-V LOW-VOLTAGE BUS SWITCH WITH 5-V TOLERANT LEVEL SHIFTER SN74CB3T3253 DUAL 1-OF-4 FET MULTIPLEXER/DEMULTIPLEXER 2.5-V/3.3-V LOW-VOLTAGE BUS SWITCH WITH 5-V TOLERANT LEVEL SHIFTER FEATURES Low Power Consumption (I CC = 20 µa Max) Output Voltage Translation Tracks

More information

CD74HC4538-Q1 HIGH-SPEED CMOS LOGIC DUAL RETRIGGERABLE PRECISION MONOSTABLE MULTIVIBRATOR

CD74HC4538-Q1 HIGH-SPEED CMOS LOGIC DUAL RETRIGGERABLE PRECISION MONOSTABLE MULTIVIBRATOR Qualified for Automotive Applications Retriggerable/Resettable Capability Trigger and Reset Propagation Delays Independent of R X, C X Triggering From the Leading or Trailing Edge Q and Q Buffered Outputs

More information

SN75471 THRU SN75473 DUAL PERIPHERAL DRIVERS

SN75471 THRU SN75473 DUAL PERIPHERAL DRIVERS SN747 THRU SN747 DUAL PERIPHERAL DRIVERS SLRS024 DECEMBER 976 REVISED MAY 990 PERIPHERAL DRIVERS FOR HIGH-VOLTAGE HIGH-CURRENT DRIVER APPLICATIONS Characterized for Use to 00 ma High-Voltage Outputs No

More information

SN74LVC2G32-EP DUAL 2-INPUT POSITIVE-OR GATE

SN74LVC2G32-EP DUAL 2-INPUT POSITIVE-OR GATE www.ti.com SN74LVC2G32-EP DUAL 2-INPUT POSITIVE-OR GATE SCES543A FEBRUARY 2004 REVISED AUGUST 2006 FEATURES Controlled Baseline Typical V OHV (Output V OH Undershoot) >2 V at V CC = 3.3 V, T A = 25 C One

More information

Precision, Gain of 0.2 Level Translation DIFFERENCE AMPLIFIER

Precision, Gain of 0.2 Level Translation DIFFERENCE AMPLIFIER SBOS333B JULY 25 REVISED OCTOBER 25 Precision, Gain of.2 Level Translation DIFFERENCE AMPLIFIER FEATURES GAIN OF.2 TO INTERFACE ±1V SIGNALS TO SINGLE-SUPPLY ADCs GAIN ACCURACY: ±.24% (max) WIDE BANDWIDTH:

More information

Supports Partial-Power-Down Mode 4.5-V to 5.5-V V Operation. (Output Ground Bounce) <0.8 V at V ESD Protection Exceeds JESD 22

Supports Partial-Power-Down Mode 4.5-V to 5.5-V V Operation. (Output Ground Bounce) <0.8 V at V ESD Protection Exceeds JESD 22 FEATURES SN74LV373AT OCTAL TRANSPARENT D-TYPE LATCH WITH 3-STATE OUTPUTS SCES630B JULY 2005 REVISED AUGUST 2005 Inputs Are TTL-Voltage Compatible I off Supports Partial-Power-Down Mode 4.5-V to 5.5-V V

More information

CD54HC194, CD74HC194, CD74HCT194

CD54HC194, CD74HC194, CD74HCT194 Data sheet acquired from Harris Semiconductor SCHS164G September 1997 - Revised May 2006 CD54HC194, CD74HC194, CD74HCT194 High-Speed CMOS Logic 4-Bit Bidirectional Universal Shift Register Features Description

More information

SN54ACT374, SN74ACT374 OCTAL D-TYPE EDGE-TRIGGERED FLIP-FLOPS WITH 3-STATE OUTPUTS

SN54ACT374, SN74ACT374 OCTAL D-TYPE EDGE-TRIGGERED FLIP-FLOPS WITH 3-STATE OUTPUTS 4.5-V to 5.5-V V CC Operation Inputs Accept Voltages to 5.5 V Max t pd of 10 ns at 5 V Inputs Are TTL-Voltage Compatible description/ordering information These 8-bit flip-flops feature 3-state outputs

More information

AM26C31-EP QUADRUPLE DIFFERENTIAL LINE DRIVER

AM26C31-EP QUADRUPLE DIFFERENTIAL LINE DRIVER 1 1FEATURES Controlled Baseline One Assembly One Test Site One Fabrication Site Extended Temperature Performance of 55 C to 125 C Enhanced Diminishing Manufacturing Sources (DMS) Support Enhanced Product-Change

More information

30V, N-Channel NexFET Power MOSFETs

30V, N-Channel NexFET Power MOSFETs CSD755Q5A www.ti.com SLPS3A DECEMBER 2 REVISED JULY 2 3V, N-Channel NexFET Power MOSFETs Check for Samples: CSD755Q5A FEATURES PRODUCT SUMMARY T A = 25 C unless otherwise stated TYPICAL VALUE UNIT 2 Ultralow

More information

CD54HC7266, CD74HC7266

CD54HC7266, CD74HC7266 CD54HC7266, CD74HC7266 Data sheet acquired from Harris Semiconductor SCHS219D August 1997 - Revised September 2003 High-Speed CMOS Logic Quad 2-Input EXCLUSIVE NOR Gate [ /Title (CD74H C7266) /Subject

More information

CD54HCT258, CD74HCT258 QUADRUPLE 2-LINE TO 1-LINE SELECTORS/MULTIPLEXERS WITH 3-STATE OUTPUTS

CD54HCT258, CD74HCT258 QUADRUPLE 2-LINE TO 1-LINE SELECTORS/MULTIPLEXERS WITH 3-STATE OUTPUTS 4.5-V to 5.5-V V CC Operation Wide Operating Temperature Range of 55 C to 125 C Balanced Propagation Delays and Transition Times Standard Outputs Drive Up To 10 LS-TTL Loads Significant Power Reduction

More information

NOT RECOMMENDED FOR NEW DESIGNS USE CDCVF2510A AS A REPLACEMENT

NOT RECOMMENDED FOR NEW DESIGNS USE CDCVF2510A AS A REPLACEMENT CDCVF2510 3.3-V PHASE-LOCK LOOP CLOCK DRIVER FEATURES Designed to Meet and Exceed PC133 SDRAM Registered DIMM Specification Rev. 1.1 Spread Spectrum Clock Compatible Operating Frequency 50 MHz to 175 MHz

More information

Dual Inverter Gate Check for Samples: SN74LVC2GU04

Dual Inverter Gate Check for Samples: SN74LVC2GU04 1 SN74LVC2GU04 SCES197N APRIL 1999 REVISED DECEMBER 2013 Dual Inverter Gate Check for Samples: SN74LVC2GU04 1FEATURES DESCRIPTION 2 Available in the Texas Instruments NanoFree This dual inverter is designed

More information

SN54ALS09, SN74ALS09 QUADRUPLE 2-INPUT POSITIVE-AND GATES WITH OPEN-COLLECTOR OUTPUTS

SN54ALS09, SN74ALS09 QUADRUPLE 2-INPUT POSITIVE-AND GATES WITH OPEN-COLLECTOR OUTPUTS SN54ALS09, SN74ALS09 QUADRUPLE 2-INPUT POSITIVE-AND GATES WITH OPEN-COLLECTOR OUTPUTS SDAS084B APRIL 1982 REVISED DECEMBER 1994 Package Options Include Plastic Small-Outline (D) Packages, Ceramic Chip

More information

description logic diagram (positive logic) logic symbol

description logic diagram (positive logic) logic symbol SDAS074B APRIL 1982 REVISED JANUARY 1995 AS1004A Offer High Capacitive-Drive Capability Driver Version of ALS04B and AS04 Package Options Include Plastic Small-Outline (D) Packages, Ceramic Chip Carriers

More information

CD54HC139, CD74HC139, CD54HCT139, CD74HCT139

CD54HC139, CD74HC139, CD54HCT139, CD74HCT139 Data sheet acquired from Harris Semiconductor SCHS148D September 1997 - Revised October 2003 CD54HC139, CD74HC139, CD54HCT139, CD74HCT139 High-Speed CMOS Logic Dual 2- to 4-Line Decoder/Demultiplexer [

More information

ORDERING INFORMATION. 0 C to 70 C Reel of 2000 TRSF3232ECDWR SSOP DB Reel of 2000 TRSF3232ECDBR RT32EC

ORDERING INFORMATION. 0 C to 70 C Reel of 2000 TRSF3232ECDWR SSOP DB Reel of 2000 TRSF3232ECDBR RT32EC www.ti.com FEATURES Operates With 3-V to 5.5-V V CC Supply Operates up to 1 Mbit/s Low Supply Current... 300 μa Typ External Capacitors... 4 0.1 μf Accept 5-V Logic Input With 3.3-V Supply Latch-Up Performance

More information

RC4136, RM4136, RV4136 QUAD GENERAL-PURPOSE OPERATIONAL AMPLIFIERS

RC4136, RM4136, RV4136 QUAD GENERAL-PURPOSE OPERATIONAL AMPLIFIERS The RM4136 and RV4136 are obsolete and are no longer supplied. Continuous Short-Circuit Protection Wide Common-Mode and Differential Voltage Ranges No Frequency Compensation Required Low Power Consumption

More information

SINGLE 2-INPUT POSITIVE-AND GATE

SINGLE 2-INPUT POSITIVE-AND GATE 1 SN74LVC1G08-Q1 www.ti.com... SCES556F MARCH 2004 REVISED APRIL 2008 SINGLE 2-INPUT POSITIVE-AND GATE 1FEATURES Qualified for Automotive Applications Latch-Up Performance Exceeds 100 ma Per Supports 5-V

More information

SN54HCT540, SN74HCT540 OCTAL BUFFERS AND LINE DRIVERS WITH 3-STATE OUTPUTS

SN54HCT540, SN74HCT540 OCTAL BUFFERS AND LINE DRIVERS WITH 3-STATE OUTPUTS Operating Voltage Range of 4.5 V to 5.5 V Low Power Consumption, 80-µA Max I CC Typical t pd = 12 ns ±6-mA Output Drive at 5 V Low Input Current of 1 µa Max Inputs Are TTL-Voltage Compatible High-Current

More information

SN74S BIT SCHOTTKY BARRIER DIODE BUS-TERMINATION ARRAY

SN74S BIT SCHOTTKY BARRIER DIODE BUS-TERMINATION ARRAY Designed to Reduce Reflection Noise Repetitive Peak Forward Current to 200 ma 16-Bit Array Structure Suited for Bus-Oriented Systems Package Options Include Plastic Small-Outline Packages and Standard

More information

Related Synchronous MOSFET Drivers DEVICE NAME ADDITIONAL FEATURES INPUTS TPS2830. Noninverted TPS2831. Inverted TPS2834. Noninverted TPS2835

Related Synchronous MOSFET Drivers DEVICE NAME ADDITIONAL FEATURES INPUTS TPS2830. Noninverted TPS2831. Inverted TPS2834. Noninverted TPS2835 Floating Bootstrap or Ground-Reference High-Side Driver Adaptive Dead-Time Control 50-ns Max Rise/Fall Times and 00-ns Max Propagation Delay 3.3-nF Load Ideal for High-Current Single or Multiphase Power

More information

SN74CBT3253C DUAL 1-OF-4 FET MULTIPLEXER/DEMULTIPLEXER 5-V BUS SWITCH WITH 2-V UNDERSHOOT PROTECTION

SN74CBT3253C DUAL 1-OF-4 FET MULTIPLEXER/DEMULTIPLEXER 5-V BUS SWITCH WITH 2-V UNDERSHOOT PROTECTION FEATURES SN74CBT3253C Functionally Identical to Industry-Standard 3253 Function Undershoot Protection for Off-Isolation on A and B Ports up to 2 V Bidirectional Data Flow, With Near-Zero Propagation Delay

More information

CD74HC4051-Q1 ANALOG MULTIPLEXER/DEMULTIPLEXER

CD74HC4051-Q1 ANALOG MULTIPLEXER/DEMULTIPLEXER CD74HC4051-Q1 ANALOG MULTIPLEXER/DEMULTIPLEXER Qualified for Automotive Applications Wide Analog Input Voltage Range of ±5 V Max Low ON Resistance 70 Ω Typical (V CC V EE = 4.5 V) 40 Ω Typical (V CC V

More information