DATASHEET EL8102, EL8103. Features. Applications. Ordering Information. Pinouts. 500MHz Rail-to-Rail Amplifiers. FN7104 Rev 7.
|
|
- Vanessa Lindsey
- 6 years ago
- Views:
Transcription
1 MHz Rail-to-Rail Amplifiers OBSOLETE PRODUCT POSSIBLE SUBSTITUTE PRODUCT EL8 AND EL8 DATASHEET FN74 Rev 7. The EL8, EL8 represent single rail-to-rail amplifiers with a -db bandwidth of MHz and slew rate of 6V/µs. Running off a very low.6ma supply current, the EL8, EL8 also feature inputs that go to.v below the V S - rail. The EL8 includes a fast-acting disable/power-down circuit. With a ns disable and a ns enable, the EL8 is ideal for multiplexing applications. The EL8, EL8 are designed for a number of general purpose video, communication, instrumentation, and industrial applications. The EL8 is available in 8 Ld SOIC and 6 Ld SOT- packages and the EL8 is available in a Ld SOT- package. All are specified for operation over the -4 C to +8 C temperature range. Ordering Information PART NUMBER PART MARKING PACKAGE PKG. DWG. # EL8IS 8IS 8 Ld SOIC MDP7 Features MHz -db bandwidth 6V/µs slew rate Low supply current =.6mA Supplies from V to.v Rail-to-rail output Input to.v below V S - Fast ns disable (EL8 only) Low cost Pb-Free available (RoHS compliant) Applications Video amplifiers Portable/hand-held products Communications devices EL8IS-T7 8IS 8 Ld SOIC MDP7 EL8IS-T 8IS 8 Ld SOIC MDP7 EL8ISZ (Note) 8ISZ 8 Ld SOIC (Pb-free) MDP7 Pinouts EL8 (8 LD SOIC) TOP VIEW EL8ISZ-T7 (Note) 8ISZ 8 Ld SOIC (Pb-free) MDP7 NC 8 ENABLE EL8ISZ-T (Note) 8ISZ 8 Ld SOIC (Pb-free) MDP7 EL8IW-T7 4 6 Ld SOT- MDP8 IN- IN VS+ OUT EL8IW-T7A 4 6 Ld SOT- MDP8 VS- 4 NC EL8IWZ-T7 (Note) EL8IWZ-T7A (Note) BAVA BAVA 6 Ld SOT- (Pb-free) 6 Ld SOT- (Pb-free) MDP8 MDP8 EL8 (6 LD SOT-) TOP VIEW EL8IW-T7 Ld SOT- MDP8 EL8IW-T7A Ld SOT- MDP8 EL8IWZ-T7 (Note) EL8IWZ-T7A (Note) BAWA BAWA Ld SOT- (Pb-free) Ld SOT- (Pb-free) MDP8 MDP8 *Please refer to TB47 for details on reel specifications. NOTE: These Intersil Pb-free plastic packaged products employ special Pb-free material sets; molding compounds/die attach materials and % matte tin plate PLUS ANNEAL - e termination finish, which is RoHS compliant and compatible with both SnPb and Pb-free soldering operations. Intersil Pb-free products are MSL classified at Pb-free peak reflow temperatures that meet or exceed the Pb-free requirements of IPC/JEDEC J STD-. OUT IN+ OUT IN+ + EL8 ( LD SOT-) TOP VIEW VS- 6 VS+ ENABLE 4 IN- VS- VS+ 4 IN- FN74 Rev 7. Page of 4
2 EL8, EL8 Absolute Maximum Ratings (T A = C) Supply Voltage from V S + to V S V Input Voltage V S + +.V to V S - -.V Differential Input Voltage V Continuous Output Current mA Thermal Information Power Dissipation See Curves Storage Temperature C to + C Ambient Operating Temperature C to +8 C Operating Junction Temperature C Pb-free reflow profile see link below CAUTION:Do not operate at or near the maximum ratings listed for extended periods of time. Exposure to such conditions may adversely impact product reliability and result in failures not covered by warranty. IMPORTANT NOTE: All parameters having Min/Max specifications are guaranteed. Typ values are for information purposes only. Unless otherwise noted, all tests are at the specified temperature and are pulsed tests, therefore: T J = T C = T A Electrical Specifications V S + = V, V S - = GND, T A = + C, V CM =.V, R L to.v, A V =, Unless Otherwise Specified. PARAMETER DESCRIPTION CONDITIONS MIN (Note ) TYP MAX (Note ) UNIT INPUT CHARACTERISTICS V OS Offset Voltage mv TCV OS Offset Voltage Temperature Coefficient Measured from T MIN to T MAX µv/ C IB Input Bias Current V IN = V -9-6 µa I OS Input Offset Current V IN = V..6 µa TCI OS Input Bias Current Temperature Coefficient Measured from T MIN to T MAX na/ C CMRR Common Mode Rejection Ratio V CM = -.V to +.V 7 9 db CMIR Common Mode Input Range V S - -. V S + -. V R IN Input Resistance Common Mode. M C IN Input Capacitance. pf AVOL Open Loop Gain = +.V to +.V, R L = k to GND 7 9 db = +.V to +.V, R L = to GND 8 db OUTPUT CHARACTERISTICS R OUT Output Resistance A V = + m V OP Positive Output Voltage Swing R L = k V R L = V V ON Negative Output Voltage Swing R L = mv R L = k mv I OUT Linear Output Current 6 ma I SC (source) Short Circuit Current R L = 7 8 ma I SC (sink) Short Circuit Current R L = ma POWER SUPPLY PSRR Power Supply Rejection Ratio V S + = 4.V to.v 7 9 db I S-ON Supply Current - Enabled.6 6 ma I S-OFF Supply Current - Disabled µa ENABLE (EL8 ONLY) t EN Enable Time ns t DS Disable Time ns V IH-ENB ENABLE Pin Voltage for Power-up.8 V V IL-ENB ENABLE Pin Voltage for Shut-down V FN74 Rev 7. Page of 4
3 EL8, EL8 Electrical Specifications V S + = V, V S - = GND, T A = + C, V CM =.V, R L to.v, A V =, Unless Otherwise Specified. (Continued) PARAMETER DESCRIPTION CONDITIONS MIN (Note ) I IH-ENB ENABLE Pin Input Current High 8.6 µa I IL-ENB ENABLE Pin Input for Current Low. µa AC PERFORMANCE BW -db Bandwidth A V = +, R F =, MHz A V = -, R F = k, 4 MHz A V = +, R F = k, 6 MHz A V = +, R F = k, 8 MHz BW ±.db Bandwidth A V = +, R F =, MHz Peak Peaking A V = +, R L = k, db GBWP Gain Bandwidth Product MHz PM Phase Margin R L = k, SR Slew Rate A V =, R L =, =.V to 4.V 6 V/µs t R Rise Time.V STEP, % to 8% 4 ns t F Fall Time.V STEP, % to 8% ns OS Overshoot mv step % t PD Propagation Delay mv step ns t S.% Settling Time mv step ns dg Differential Gain A V = +, R F = k, R L =. % dp Differential Phase A V = +, R F = k, R L =. e N Input Noise Voltage f = khz nv/ Hz i N + Positive Input Noise Current f = khz.7 pa/ Hz i N - Negative Input Noise Current f = khz. pa/ Hz NOTE:. Parts are % tested at + C. Over-temperature limits established by characterization and are not production tested. Pin Descriptions PIN TYP MAX (Note ) UNIT EL8IS EL8IW EL8IW NAME FUNCTION NC Not connected 4 4 IN- Inverting input IN+ Non-inverting input 4 VS- Negative power supply NC Not connected 6 OUT Amplifier output 7 6 VS+ Positive power supply 8 ENABLE Enable and disable input FN74 Rev 7. Page of 4
4 EL8, EL8 Simplified Schematic Diagram V S+ I I R 6 R 7 R 8 Q Q 6 V BIAS Q 7 R IN+ R R Q Q IN- DIFFERENTIAL TO SINGLE ENDED DRIVE GENERATOR OUT V BIAS Q Q 4 Q 8 R 4 R R 9 Typical Performance Curves V S- GAIN (db) - - A V = R L = k V OP-P = V V OP-P = V V OP-P = mv - k M M M G NORMALIZED GAIN (db) - R F = R G = k R F = R G = R F = R G = k - A V = R L = k - k M M M G FIGURE. FREQUENCY RESPONSE FOR VARIOUS OUTPUT VOLTAGE LEVELS FIGURE. SMALL SIGNAL FREQUENCY RESPONSE vs R F AND R G NORMALIZED GAIN (db) R L = k A V = A V = A V = A V = NORMALIZED GAIN (db) R L = k R F = k A V = - A V = - A V = - -6 k M M M G FIGURE. SMALL SIGNAL FREQUENCY RESPONSE FOR VARIOUS NON-INVERTING GAINS -6 k M M M G FIGURE 4. SMALL SIGNAL FREQUENCY RESPONSE FOR VARIOUS INVERTING GAINS FN74 Rev 7. Page 4 of 4
5 EL8, EL8 Typical Performance Curves (Continued) A V = V OP-P = mv R L = R L = k 9 A V = R F = R G = k GAIN (db) - R L = GAIN (db) 7 R L = R L = k, - - k M M M G FIGURE. SMALL SIGNAL FREQUENCY RESPONSE FOR VARIOUS R LOAD k M M M G FIGURE 6. SMALL SIGNAL FREQUENCY RESPONSE vs VARIOUS R LOAD GAIN (db) - - A V = R L = k V OP-P = mv C L = pf C L =.pf NORMALIZED GAIN (db) 9 7 A V = R L = k R F = R G = k C L =pf C L = pf C L = 4pF C L = 9pF - k M M M G k M M M G FIGURE 7. SMALL SIGNAL FREQUENCY RESPONSE vs C L FIGURE 8. SMALL SIGNAL FREQUENCY RESPONSE FOR VARIOUS C L 7 R L = R L = k A V = R L = k GAIN (db) - R L = PHASE ( ) GAIN (db) R L = k k k k M M M -4 G - k k k M M M G FIGURE 9. OPEN LOOP GAIN AND PHASE vs FREQUENCY FIGURE. DISABLED OUTPUT ISOLATION FREQUENCY RESPONSE FN74 Rev 7. Page of 4
6 EL8, EL8 Typical Performance Curves (Continued) - PSRR (db) PSRR- PSRR+ BANDWIDTH (MHz) 4 4 R L = k A V = A V = - k k k M M M FIGURE. POWER SUPPLY REJECTION RATIO vs FREQUENCY V S (V) FIGURE. SMALL SIGNAL BANDWIDTH vs SUPPLY VOLTAGE IMPEDANCE ( ). PEAKING (db)..... R L = k A V = A V =. k k M M M V S (V) FIGURE. OUPUT IMPEDANCE vs FREQUENCY FIGURE 4. SMALL SIGNAL PEAKING vs SUPPLY VOLTAGE CMRR (db) - -7 I S (ma) k M M M V S (V) FIGURE. COMMON-MODE REJECTION RATIO vs FREQUENCY FIGURE 6. SUPPLY CURRENT vs SUPPLY VOLTAGE FN74 Rev 7. Page 6 of 4
7 EL8, EL8 Typical Performance Curves (Continued) DISTORTION (dbc) R L = k A V = HD@MHz HD@MHz HD@MHz HD@MHz HD@MHz HD@MHz 4 V O(P-P) (V) DISTORTION (dbc) f = MHz HD@A V = HD@A V = HD@A V = HD@A V = -9 V O = V P-P FOR A V = V O = V P-P FOR A V = - K K R LOAD ( ) FIGURE 7. HARMONIC DISTORTION vs OUTPUT VOLTAGE FIGURE 8. HARMONIC DISTORTION vs LOAD RESISTANCE DISTORTION (dbc) R L = k V O = V P-P FOR A V = V O = V P-P FOR A V = HD@A V = HD@A V = HD@A V = HD@A V = 4 VOLTAGE NOISE (nv/ Hz) CURRENT NOISE (pa/ Hz), k e N I N + I N - k k k M M FREQUENCY (MHz) FIGURE 9. HARMONIC DISTORTION vs FREQUENCY FIGURE. VOLTAGE AND CURRENT NOISE vs FREQUENCY, A V =, R L = k TO.V,, A V =, R L = k TO.V, ns/div ns/div FIGURE. LARGE SIGNAL TRANSIENT RESPONSE - RISING FIGURE. LARGE SIGNAL TRANSIENT RESPONSE - FALLING FN74 Rev 7. Page 7 of 4
8 EL8, EL8 Typical Performance Curves (Continued), A V =, R L = k TO.V,, A V =, R L = k TO.V.6 V IN ns/div FIGURE. SMALL SIGNAL TRANSIENT REPONSE µs/div FIGURE 4. OUTPUT SWING, A V =, R L = k TO.V. CH ENABLE INPUT. CH µs/div CH, CH, V/DIV, M=ns FIGURE. OUTPUT SWING FIGURE 6. ENABLED RESPONSES.4 JEDEC JESD-7 HIGH EFFECTIVE THERMAL CONDUCTIVITY TEST BOARD CH CH ENABLE INPUT POWER DISSIPATION (W) mW 4mW SOT-/6 JA = + C/W SO8 JA = + C/W CH, CH,.V/DIV, M = ns FIGURE 7. DISABLED RESPONSE 7 8 AMBIENT TEMPERATURE ( C) FIGURE 8. PACKAGE POWER DISSIPATION vs AMBIENT TEMPERATURE FN74 Rev 7. Page 8 of 4
9 EL8, EL8 Typical Performance Curves (Continued) POWER DISSIPATION (W) JEDEC JESD- LOW EFFECTIVE THERMAL CONDUCTIVITY TEST BOARD mW mW SOT-/6 JA = +6 C/W SO8 JA = +6 C/W 7 8 AMBIENT TEMPERATURE ( C) FIGURE 9. PACKAGE POWER DISSIPATION vs AMBIENT TEMPERATURE Description of Operation and Application Information Product Description The EL8, EL8 are wide bandwidth, single supply, low power and rail-to-rail output voltage feedback operational amplifiers. Both amplifiers are internally compensated for closed loop gain of + of greater. Connected in voltage follower mode and driving a k load, the EL8, EL8 have a -db bandwidth of MHz. Driving a load, the bandwidth is about MHz while maintaining a 6V/µs slew rate. The EL8 is available with a power-down pin to reduce power to µa typically while the amplifier is disabled. Input, Output and Supply Voltage Range The EL8, EL8 have been designed to operate with a single supply voltage from V to.v. Split supplies can also be used as long as their total voltage is within V to.v. The amplifiers have an input common mode voltage range from.v below the negative supply (VS- pin) to within.v of the positive supply (VS+ pin). If the input signal is outside the above specified range, it will cause the output signal to be distorted. The output of the EL8, EL8 can swing rail-to-rail. As the load resistance becomes lower, the ability to drive close to each rail is reduced. For the load resistor k, the output swing is about 4.9V at a V supply. For the load resistor, the output swing is about 4.6V. Choice of Feedback Resistor and Gain Bandwidth Product For applications that require a gain of +, no feedback resistor is required. Just short the output pin to the inverting input pin. For gains greater than +, the feedback resistor forms a pole with the parasitic capacitance at the inverting input. As this pole becomes smaller, the amplifier s phase margin is reduced. This causes ringing in the time domain and peaking in the frequency domain. Therefore, R F has some maximum value that should not be exceeded for optimum performance. If a large value of R F must be used, a small capacitor in the few pf range in parallel with R F can help to reduce the ringing and peaking at the expense of reducing the bandwidth. As far as the output stage of the amplifier is concerned, the output stage is also a gain stage with the load. R F and R G appear in parallel with R L for gains other than +. As this combination gets smaller, the bandwidth falls off. Consequently, R F also has a minimum value that should not be exceeded for optimum performance. For a gain of +, R F = is optimum. For the gains other than +, optimum response is obtained with R F between to k. The EL8, EL8 have a gain bandwidth product of MHz. For gains, its bandwidth can be predicted by the Equation : Gain BW = MHz (EQ. ) Video Performance For good video performance, an amplifier is required to maintain the same output impedance and the same frequency response as DC levels are changed at the output. This is especially difficult when driving a standard video load of because the change in output current with DC level. Special circuitry has been incorporated in the EL8, EL8 to reduce the variation of the output impedance with the current output. This results in dg and dp specifications of.% and., while driving at a gain of. Driving high impedance loads would give a similar or better dg and dp performance. Driving Capacitive Loads and Cables The EL8, EL8 can drive pf loads in parallel with k with less than db of peaking at a gain of +. If less peaking is desired in applications, a small series resistor (usually between to ) can be placed in series with the FN74 Rev 7. Page 9 of 4
10 EL8, EL8 output to eliminate most peaking. However, this will reduce the gain slightly. If the gain setting is greater than, the gain resistor R G can then be chosen to make up for any gain loss which may be created by the additional series resistor at the output. When used as a cable driver, double termination is always recommended for reflection-free performance. For those applications, a back-termination series resistor at the amplifier s output will isolate the amplifier from the cable and allow extensive capacitive drive. However, other applications may have high capacitive loads without a back-termination resistor. Again, a small series resistor at the output can help to reduce peaking. Disable/Power-Down The EL8 can be disabled and its output placed in a high impedance state. The turn-off time is about ns and the turn-on time is about ns. When disabled, the amplifier s supply current is reduced to µa typically, thereby effectively eliminating the power consumption. The amplifier s power down can be controlled by standard TTL or CMOS signal levels at the ENABLE pin. The applied logic signal is relative to V S - pin. Letting the ENABLE pin float or applying a signal that is less than.8v above V S - will enable the amplifier. The amplifier will be disabled when the signal at ENABLE pin is V above V S -. Output Drive Capability The EL8, EL8 do not have internal short circuit protection circuitry. They have a typical short circuit current of 8mA sourcing and ma sinking for the output is connected to half way between the rails with a resistor. If the output is shorted indefinitely, the power dissipation could easily increase such that the part will be destroyed. Maximum reliability is maintained if the output current never exceeds ±4mA. This limit is set by the design of the internal metal interconnections. Power Dissipation With the high output drive capability of the EL8, EL8, It is possible to exceed the + C absolute maximum junction temperature under certain load current conditions. Therefore, it is important to calculate the maximum junction temperature for the application to determine if the load conditions or package types need to be modified for the amplifier to remain in the safe operating area. The maximum power dissipation allowed in a package is determined according to Equation : T JMAX T AMAX PD MAX = (EQ. ) JA Where: T JMAX = Maximum junction temperature T AMAX = Maximum ambient temperature JA = Thermal resistance of the package The maximum power dissipation actually produced by an IC is the total quiescent supply current times the total power supply voltage, plus the power in the IC due to the load, or: For sourcing, Equation : PD MAX = V S I SMAX + V S (EQ. ) R L For sinking, Equation 4: PD MAX = V S I SMAX + V - S I (EQ. 4) LOAD Where: V S = Total supply voltage I SMAX = Maximum quiescent supply current = Maximum output voltage of the application R LOAD = Load resistance tied to ground I LOAD = Load current By setting the two PD MAX equations equal to each other, we can solve the output current and R LOAD to avoid the device overheat. Power Supply Bypassing and Printed Circuit Board Layout As with any high frequency device, a good printed circuit board layout is necessary for optimum performance. Lead lengths should be as short as possible. The power supply pin must be well bypassed to reduce the risk of oscillation. For normal single supply operation, where the V S - pin is connected to the ground plane, a single 4.7µF tantalum capacitor in parallel with a.µf ceramic capacitor from V S + to GND will suffice. This same capacitor combination should be placed at each supply pin to ground if split supplies are to be used. In this case, the VS- pin becomes the negative supply rail. For good AC performance, parasitic capacitance should be kept to a minimum. Use of wire wound resistors should be avoided because of their additional series inductance. Use of sockets should also be avoided if possible. Sockets add parasitic inductance and capacitance that can result in compromised performance. Minimizing parasitic capacitance at the amplifier s inverting input pin is very important. The feedback resistor should be placed very close to the inverting input pin. Strip line design techniques are recommended for the signal traces. FN74 Rev 7. Page of 4
11 EL8, EL8 Typical Applications VIDEO SYNC PULSE REMOVER Many CMOS analog to digital converters have a parasitic latch up problem when subjected to negative input voltage levels. Since the sync tip contains no useful video information and it is a negative going pulse, we can chop it off. Figure shows a gain of connections for EL8, EL8. Figure shows the complete input video signal applied at the input, as well as the output signal with the negative going sync pulse removed. B A MHz V P-P k + - MHz + V P-P - +.V -.V k +.V -.V V IN + - V V S+ V S- ENABLE k k k k FIGURE. TWO TO ONE MULTIPLEXER FIGURE. SYNC PULSE REMOVER ENABLE V -.V -.V V -.V V IN.V V V V V A B -V.V V M = ns/div M = µs/div FIGURE. VIDEO SIGNAL MULTIPLEXER Besides the normal power-down usage, the ENABLE pin of the EL8 can be used for multiplexing applications. Figure shows two EL8 with the outputs tied together, driving a back terminated video load. A V P-P MHz sine wave is applied to Amp A and a V P-P MHz sine wave is applied to Amp B. Figure shows the ENABLE signal and the resulting output waveform at. Observe the breakbefore-make operation of the multiplexing. Amp A is on and V IN is passed through to the output when the ENABLE signal is low and turns off in about ns when the ENABLE signal is high. About ns later, Amp B turns on and V IN is passed through to the output. The break-before-make operation ensures that more than one amplifier isn t trying to drive the bus at the same time. FIGURE. SINGLE SUPPLY VIDEO LINE DRIVER The EL8 and EL8 are wideband rail-to-rail output op amplifiers with large output current, excellent dg, dp, and low distortion that allow them to drive video signals in low supply applications. Figure 4 is the single supply non-inverting video line driver configuration and Figure is the inverting video line driver configuration. The signal is AC coupled by C. R and R are used to level shift the input and output to provide the largest output swing. R F and R G set the AC gain. C isolates the virtual ground potential. R T and R are the termination resistors for the line. C, C and C are selected big enough to minimize the droop of the luminance signal. FN74 Rev 7. Page of 4
12 EL8, EL8 V R F k V IN R T C 47µF R k R G k R k + - R F k C µf C 47µF R V IN R T C 47µF R k R k R G V - + V C µf C 47µF R FIGURE 4. V SINGLE SUPPLY NON INVERTING VIDEO LINE DRIVER FIGURE. SINGLE SUPPLY INVERTING VIDEO LINE DRIVER NORMALIZED GAIN (db) 4 A V = - A V = K M M M M FIGURE 6. VIDEO LINE DRIVER FREQUENCY RESPONSE FN74 Rev 7. Page of 4
13 EL8, EL8 Small Outline Package Family (SO) A D h X 4 N (N/)+ E E PIN # I.D. MARK c A SEE DETAIL X B. M C A B (N/) L C e H A SEATING PLANE GAUGE PLANE..4 C. M C A B b A DETAIL X L 4 ±4 MDP7 SMALL OUTLINE PACKAGE FAMILY (SO) INCHES SO6 SO6 (. ) SO SO4 SO8 SYMBOL SO-8 SO-4 (. ) (SOL-6) (SOL-) (SOL-4) (SOL-8) TOLERANCE NOTES A MAX - A A b c D , E E , e Basic - L L Basic - h Reference - N Reference - Rev. M /7 NOTES:. Plastic or metal protrusions of.6 maximum per side are not included.. Plastic interlead protrusions of. maximum per side are not included.. Dimensions D and E are measured at Datum Plane H. 4. Dimensioning and tolerancing per ASME Y4.M-994 FN74 Rev 7. Page of 4
14 EL8, EL8 SOT- Package Family. C D X C E SEATING PLANE. C NX e N. C A-B X (L) A 6 e 4 B. M C A-B D b NX D H E A D. C X A MDP8 SOT- PACKAGE FAMILY MILLIMETERS SYMBOL SOT- SOT-6 TOLERANCE A.4.4 MAX A.. ±. A.4.4 ±. b.4.4 ±. c.4.4 ±.6 D.9.9 Basic E.8.8 Basic E.6.6 Basic e.9.9 Basic e.9.9 Basic L.4.4 ±. L.6.6 Reference N 6 Reference Rev. F /7 NOTES:. Plastic or metal protrusions of.mm maximum per side are not included.. Plastic interlead protrusions of.mm maximum per side are not included.. This dimension is measured at Datum Plane H. 4. Dimensioning and tolerancing per ASME Y4.M Index area - Pin # I.D. will be located within the indicated zone (SOT-6 only). 6. SOT- version has no center lead (shown as a dashed line). A GAUGE PLANE. c L + - Copyright Intersil Americas LLC -7. All Rights Reserved. All trademarks and registered trademarks are the property of their respective owners. For additional products, see Intersil products are manufactured, assembled and tested utilizing ISO9 quality systems as noted in the quality certifications found at Intersil products are sold by description only. Intersil may modify the circuit design and/or specifications of products at any time without notice, provided that such modification does not, in Intersil's sole judgment, affect the form, fit or function of the product. Accordingly, the reader is cautioned to verify that datasheets are current before placing orders. Information furnished by Intersil is believed to be accurate and reliable. However, no responsibility is assumed by Intersil or its subsidiaries for its use; nor for any infringements of patents or other rights of third parties which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of Intersil or its subsidiaries. For information regarding Intersil Corporation and its products, see FN74 Rev 7. Page 4 of 4
DATASHEET EL8200, EL8201, EL8401. Features. Applications. Pinouts. 200MHz Rail-to-Rail Amplifiers. FN7105 Rev 5.00 Page 1 of 16.
DATASHEET EL8, EL8, EL8 MHz Rail-to-Rail Amplifiers FN7 Rev. The EL8, EL8, and EL8 represent rail-to-rail amplifiers with a -3dB bandwidth of MHz and slew rate of V/µs. Running off a very low supply current
More informationDATASHEET EL2125. Features. Applications. Ordering Information. Pinouts. Ultra-Low Noise, Low Power, Wideband Amplifier. FN7045 Rev 3.
DATASHEET EL Ultra-Low Noise, Low Power, Wideband Amplifier The EL is an ultra-low noise, wideband amplifier that runs on half the supply current of competitive parts. It is intended for use in systems
More informationDATASHEET EL5462. Features. Pinout. Applications. Ordering Information. 500MHz Low Power Current Feedback Amplifier. FN7492 Rev 0.
DATASHEET EL5462 5MHz Low Power Current Feedback Amplifier The EL5462 is a current feedback amplifier with a bandwidth of 5MHz which makes this amplifier ideal for today s high speed video and monitor
More informationDATASHEET EL8108. Features. Applications. Pinouts. Video Distribution Amplifier. FN7417 Rev 2.00 Page 1 of 14. January 29, FN7417 Rev 2.
EL Video Distribution Amplifier OBSOLETE PRODUCT NO RECOMMENDED REPLACEMENT contact our Technical Support Center at --INTERSIL or www.intersil.com/tsc DATASHEET FN77 Rev. The EL is a dual current feedback
More informationData Sheet May 10, Features. Pinout
EL576 Data Sheet May, 7 FN7. 5MHz Differential Twisted-Pair Driver The EL576 is a high bandwidth amplifier with an output in differential form. It is primarily targeted for applications such as driving
More informationISL Features. Multi-Channel Buffers Plus V COM Driver. Ordering Information. Applications. Pinout FN Data Sheet December 7, 2005
Data Sheet FN6118.0 Multi-Channel Buffers Plus V COM Driver The integrates eighteen gamma buffers and a single V COM buffer for use in large panel LCD displays of 10 and greater. Half of the gamma channels
More informationEL5129, EL5329. Multi-Channel Buffers. Features. Applications. Ordering Information FN Data Sheet May 13, 2005
Data Sheet May 3, 25 FN743. Multi-Channel Buffers The EL529 and EL5329 integrate multiple gamma buffers and a single V COM buffer for use in large panel LCD displays of and greater. The EL529 integrates
More informationDATASHEET EL5175, EL5375. Features. Applications. Pinouts. Ordering Information. 550MHz Differential Line Receivers. FN7306 Rev 7.
DATASHEET EL575, EL5375 55MHz Differential Line Receivers FN736 Rev 7. The EL575 and EL5375 are single and triple high bandwidth amplifiers designed to extract the difference signal from noisy environments.
More informationEL5027. Dual 2.5MHz Rail-to-Rail Input-Output Buffer. Features. Applications. Ordering Information. Pinout. Data Sheet May 4, 2007 FN7426.
EL57 Data Sheet FN746.1 Dual.5MHz Rail-to-Rail Input-Output Buffer The EL57 is a dual, low power, high voltage rail-to-rail input-output buffer. Operating on supplies ranging from 5V to 15V, while consuming
More informationEL5171, EL5371. Features. 250MHz Differential Twisted-Pair Drivers. Applications. Ordering Information. Pinouts FN Data Sheet October 30, 2006
EL57, EL57 Data Sheet FN77.6 5MHz Differential Twisted-Pair Drivers The EL57 and EL57 are single and triple bandwidth amplifiers with an output in differential form. They are primarily targeted for applications
More informationEL5175, EL MHz Differential Line Receivers. Features. Applications. Pinouts. Data Sheet May 10, 2007 FN7306.6
EL575, EL5375 Data Sheet May, 7 FN736.6 55MHz Differential Line Receivers The EL575 and EL5375 are single and triple high bandwidth amplifiers designed to extract the difference signal from noisy environments.
More informationEL5175, EL MHz Differential Line Receivers. Features. Applications. Pinouts. Data Sheet February 11, 2005 FN7306.5
EL575, EL5375 Data Sheet February, 5 FN736.5 55MHz Differential Line Receivers The EL575 and EL5375 are single and triple high bandwidth amplifiers designed to extract the difference signal from noisy
More informationDATASHEET EL5100, EL5101, EL5300. Features. Applications. 200MHz Slew Enhanced VFA. FN7330 Rev 3.00 Page 1 of 15. May 3, FN7330 Rev 3.
DATASHEET EL, EL, EL MHz Slew Enhanced VFA The EL, EL, and EL represent high-speed voltage feedback amplifiers based on the current feedback amplifier architecture. This gives the typical high slew rate
More informationDATASHEET. Features. Applications. Pinouts EL5170, EL MHz Differential Twisted-Pair Drivers. FN7309 Rev Page 1 of 14.
DATASHEET EL5170, EL5370 100MHz Differential Twisted-Pair Drivers The EL5170 and EL5370 are single and triple high bandwidth amplifiers with a fixed gain of 2. They are primarily targeted for applications
More informationEL5172, EL MHz Differential Line Receivers. Features. Applications. Ordering Information. Pinouts FN Data Sheet August 3, 2005
EL57, EL57 Data Sheet FN7.6 5MHz Differential Line Receivers The EL57 and EL57 are single and triple high bandwidth amplifiers designed to extract the difference signal from noisy environments. They are
More informationEL5172, EL MHz Differential Line Receivers. Features. Applications. Pinouts FN Data Sheet January 25, 2008
EL57, EL57 Data Sheet FN7.8 5MHz Differential Line Receivers The EL57 and EL57 are single and triple high bandwidth amplifiers designed to extract the difference signal from noisy environments. They are
More informationDATASHEET ISL Features. Applications. Ordering Information. Pinout. 8MHz Rail-to-Rail Composite Video Driver. FN6104 Rev 5.
DATASHEET ISL59110 8MHz Rail-to-Rail Composite Video Driver The ISL59110 is a single rail-to-rail 3-pole output reconstruction filter with a -3dB roll-off frequency of 8MHz and a slew rate of 40V/µs, with
More informationDATASHEET EL2126. Features. Applications. Pinouts. Ultra-Low Noise, Low Power, Wideband Amplifier. FN7046 Rev 4.00 Page 1 of 19.
DATASHEET EL6 Ultra-Low Noise, Low Power, Wideband Amplifier The EL6 is an ultra-low noise, wideband amplifier that runs on half the supply current of competitive parts. It is intended for use in systems
More information250MHz Differential Twisted-Pair Driver
5MHz Differential Twisted-Pair Driver EL576 The EL576 is a high bandwidth amplifier with an output in differential form. It is primarily targeted for applications such as driving twisted-pair lines or
More informationEL5170, EL MHz Differential Twisted-Pair Drivers. Features. Applications. Pinouts FN Data Sheet May 7, 2007
EL570, EL570 Data Sheet FN709.7 00MHz Differential Twisted-Pair Drivers The EL570 and EL570 are single and triple high bandwidth amplifiers with a fixed gain of. They are primarily targeted for applications
More informationDATASHEET ISL Features. Applications. Ordering Information. Pinout. High Supply Voltage 200MHz Unity-Gain Stable Operational Amplifier
DATASHEET High Supply Voltage MHz UnityGain Stable Operational Amplifier FN7497 Rev 4. The is a high speed, low power, low cost monolithic operational amplifier. The is unitygain stable and features a
More informationDATASHEET EL5156, EL5157, EL5256, EL5257. Features. Applications. Pinouts. <1mV Voltage Offset, 600MHz Amplifiers
EL6, EL7, EL6, EL7
More informationDATASHEET ISL Features. Applications. Ordering Information. Pinout. High Supply Voltage 200MHz Unity-Gain Stable Operational Amplifier
DATASHEET High Supply Voltage MHz UnityGain Stable Operational Amplifier FN69 Rev. The is a high speed, low power, low cost monolithic operational amplifier. The is unitygain stable and features a V/µs
More informationEL5174, EL MHz Differential Twisted-Pair Drivers. Features. Applications. Pinouts. Data Sheet October 30, 2007 FN7313.6
EL57, EL57 Data Sheet FN7.6 55MHz Differential Twisted-Pair Drivers The EL57 and EL57 are single and triple high bandwidth amplifiers with an output in differential form. They are primarily targeted for
More information(8 LD SOIC, MSOP) (24 LD QSOP)
EL57, EL57 Data Sheet FN72.8 5MHz Differential Twisted-Pair Drivers The EL57 and EL57 are single and triple high bandwidth amplifiers with a fixed gain of 2. They are primarily targeted for applications
More informationSALLEN-KEY LOW PASS FILTER
DATASHEET ISL28325, ISL28345 40V Low Power Dual and Quad Operational Amplifier The ISL28325 and ISL28345 are dual and quad general purpose amplifiers featuring low noise vs power consumption. The combination
More informationEL2142. Features. Differential Line Receiver. Applications. Ordering Information. Pinout. Data Sheet February 11, 2005 FN7049.1
Data Sheet FN7049.1 Differential Line Receiver The is a very high bandwidth amplifier designed to extract the difference signal from noisy environments, and is thus primarily targeted for applications
More informationDATASHEET. Features. Applications. Pinouts EL5173, EL MHz Differential Twisted-Pair Drivers. FN7312 Rev Page 1 of 15.
DATASHEET EL7, EL7 MHz Differential Twisted-Pair Drivers The EL7 and EL7 are single and triple high bandwidth amplifiers with a fixed gain of 2. They are primarily targeted for applications such as driving
More informationDATASHEET E L2480. Features. Ordering Information. Applications. Pinout. 250MHz/3mA Current Mode Feedback Amplifier. FN7055 Rev 1.
DATASHEET E L2480 250MHz/3mA Current Mode Feedback Amplifier The EL2480 is a quad current-feedback operational amplifier which achieves a -3dB bandwidth of 250MHz at a gain of +1 while consuming only 3mA
More informationDATASHEET. Features. Applications. Pinouts EL5174, EL MHz Differential Twisted-Pair Drivers. FN7313 Rev 9.00 Page 1 of 15.
DATASHEET EL57, EL57 55MHz Differential Twisted-Pair Drivers The EL57 and EL57 are single and triple high bandwidth amplifiers with an output in differential form. They are primarily targeted for applications
More information550MHz Differential Twisted-Pair Drivers
55MHz Differential Twisted-Pair Drivers EL57, EL57 The EL57 and EL57 are single and triple high bandwidth amplifiers with an output in differential form. They are primarily targeted for applications such
More informationISL4089. Features. DC-Restored Video Amplifier. Applications. Related Documents. Ordering Information. Pinout FN Data Sheet June 28, 2006
Data Sheet FN9. DCRestored Video Amplifier The is complete DCrestored monolithic video amplifier subsystem. It contains a high performance video amplifier and a nulling, sampleandhold amplifier designed
More informationFeatures PART MARKING
DATASHEET EL506, EL5306 350MHz Fixed Gain Amplifiers with Enable The EL506 and EL5306 are fixed gain amplifiers with a bandwidth of 350MHz. This makes these amplifiers ideal for today s high speed video
More informationDATASHEET EL7104. Features. Ordering Information. Applications. Pinout. High Speed, Single Channel, Power MOSFET Driver. FN7113 Rev 2.
DATASHEET EL7104 High Speed, Single Channel, Power MOSFET Driver FN7113 Rev 2.00 The EL7104 is a matched driver IC that improves the operation of the industry-standard TC-4420/29 clock drivers. The Elantec
More information250MHz Differential Twisted-Pair Drivers
MHz Differential Twisted-Pair Drivers EL7, EL7 The EL7 and EL7 are single and triple bandwidth amplifiers with an output in differential form. They are primarily targeted for applications such as driving
More informationDATASHEET ISL Features. Applications Ordering Information. Pinouts. 5MHz, Single Precision Rail-to-Rail Input-Output (RRIO) Op Amp
DATASHEET ISL2836 MHz, Single Precision Rail-to-Rail Input-Output (RRIO) Op Amp FN63 Rev 6. January 6, 2 The ISL2836 is a low-power single operational amplifier optimized for single supply operation from
More informationDATASHEET EL2045. Features. Applications. Ordering Information. Pinout. Low-Power 100MHz Gain-of-2 Stable Operational Amplifier
NOT RECOMMENDED FOR NEW DESIGNS NO RECOMMENDED REPLACEMENT contact our Technical Support Center at 1-888-INTERSIL or www.intersil.com/tsc Low-Power 100MHz Gain-of-2 Stable Operational Amplifier DATASHEET
More informationDATASHEET HA Features. Applications. Ordering Information. Pinouts. 250MHz Video Buffer. FN2924 Rev 8.00 Page 1 of 12.
25MHz Video Buffer NOT RECOMMENDED FOR NEW DESIGNS NO RECOMMENDED REPLACEMENT contact our Technical Support Center at -888-INTERSIL or www.intersil.com/tsc DATASHEET FN2924 Rev 8. The HA-533 is a unity
More informationDATASHEET HA-2520, HA-2522, HA Features. Applications. Ordering Information
DATASHEET 2MHz, High Slew Rate, Uncompensated, High Input Impedance, Operational Amplifiers FN2894 Rev 1. comprise a series of operational amplifiers delivering an unsurpassed combination of specifications
More informationNano Power, Push/Pull Output Comparator
Nano Power, Push/Pull Output Comparator ISL289 The ISL289 is a nano power comparator optimized for low-power applications. This device is designed for single-supply operation from.8v to.v and typically
More informationDATASHEET HA Features. Applications. Pinout. Part Number Information. 12MHz, High Input Impedance, Operational Amplifier
12MHz, High Input Impedance, Operational Amplifier OBSOLETE PRODUCT POSSIBLE SUBSTITUTE PRODUCT HA-2525 DATASHEET FN289 Rev 6. HA-255 is an operational amplifier whose design is optimized to deliver excellent
More informationFeatures TEMP. RANGE ( C)
DATASHEET ISL57 Power Line Communication (PLC) The ISL57 is a dual operational amplifier designed for PLC line driving in OFDM and SSC based solutions. This device features a high drive capability of 750mA
More informationDATASHEET EL5127, EL5227, EL5327, EL5427. Features. Applications. 2.5MHz 4-, 8-, 10- and 12-Channel Rail-to-Rail Buffers. FN7111 Rev 4.
.5MHz -, 8-, - and -Channel Rail-to-Rail Buffers The EL57, EL57, EL57, and EL57 are low power, high voltage rail-to-rail input/output buffers designed for use in reference voltage buffering applications
More informationOrdering Information PART NUMBER PART MARKING TAPE & REEL PACKAGE PKG. DWG. # ELIWT-T7 8 7 (3k pcs) Ld TSOT MDP49 ELIWT-T7A 8 7 (2 pcs) Ld TSOT MDP49
EL, EL2, EL4 Data Sheet FN79.7 6MHz Rail-to-Rail Input-Output Op Amps The EL, EL2, and EL4 are low power, high voltage rail-to-rail input-output amplifiers. The EL represents a single amplifier, the EL2
More informationDATASHEET HA Features. Applications. Ordering Information. 110MHz, High Slew Rate, High Output Current Buffer. FN2921 Rev 12.
DATASHEET HA-52 MHz, High Slew Rate, High Output Current Buffer The HA-52 is a monolithic, wideband, high slew rate, high output current, buffer amplifier. Utilizing the advantages of the Intersil D.I.
More informationDATASHEET EL1503A. Features. Applications. Pinouts. High Power Differential Line Driver. FN7039 Rev 2.00 Page 1 of 17. March 26, FN7039 Rev 2.
DATASHEET EL3A High Power Differential Line Driver The EL3A ADSL Line Driver contains two wideband high-voltage drivers which are ideally suited for both ADSL and HDSL2 applications. They can supply a
More informationDATASHEET ISL28271, ISL Features. Ordering Information. Applications. Related Literature. Pinout
NOT RECOMMENDED FOR NEW DESIGNS NO RECOMMENDED REPLACEMENT contact our Technical Support Center at 1-888-INTERSIL or www.intersil.com/tsc Dual Micropower, Single Supply, Rail-to-Rail Input and Output (RRIO)
More informationHA-2520, HA MHz, High Slew Rate, Uncompensated, High Input Impedance, Operational Amplifiers. Features. Applications. Ordering Information
HA-22, HA-22 Data Sheet August, 2 FN2894. 2MHz, High Slew Rate, Uncompensated, High Input Impedance, Operational Amplifiers HA-22/22 comprise a series of operational amplifiers delivering an unsurpassed
More informationDATASHEET EL2072. Features. Applications. Pinout. Ordering Information. 730MHz Closed Loop Buffer
730MHz Closed Loop Buffer OBSOLETE PRODUCT NO RECOMMENDED REPLACEMENT contact our Technical Support Center at 1-888-INTERSIL or www.intersil.com/tsc DATASHEET FN7033 Rev 0.00 The EL2072 is a wide bandwidth,
More informationHA MHz Video Buffer. Features. Applications. Ordering Information. Pinouts. Data Sheet February 6, 2006 FN2924.8
HA-533 Data Sheet February 6, 26 FN2924.8 25MHz Video Buffer The HA-533 is a unity gain monolithic IC designed for any application requiring a fast, wideband buffer. Featuring a bandwidth of 25MHz and
More informationDATASHEET ISL Features. Applications. Related Literature. Single Port, PLC Differential Line Driver
DATASHEET ISL112 Single Port, PLC Differential Line Driver FN8823 Rev.. The ISL112 is a single port differential line driver developed for Power Line Communication (PLC) applications. The device is designed
More informationDATASHEET EL5220T. Features. Applications*(see page 13) 12MHz Rail-to-Rail Input-Output Operational Amplifier. FN6892 Rev 0.
DATASHEET EL22T 12MHz Rail-to-Rail Input-Output Operational Amplifier The EL22T is a high voltage rail-to-rail input-output amplifier with low power consumption. The EL22T contains two amplifiers. Each
More informationDATASHEET HA Features. Applications. Pinout. Ordering Information. Quad, 3.5MHz, Operational Amplifier. FN2922 Rev 5.00 Page 1 of 8.
DATASHEET HA-4741 Quad, 3.5MHz, Operational Amplifier HA-4741, which contains four amplifiers on a monolithic chip, provides a new measure of performance for general purpose operational amplifiers. Each
More informationEL2244, EL2444. Features. Dual/Quad Low-Power 120MHz Unity-Gain Stable Op Amp. Applications. Pinouts FN Data Sheet July 14, 2004
EL2244, EL2444 Data Sheet July 14, 2004 FN7059.1 Dual/Quad Low-Power 120MHz Unity-Gain Stable Op Amp The EL2244 and EL2444 are dual and quad versions of the popular EL2044. They are high speed, low power,
More informationMARKING RANGE ( C) PACKAGE DWG. # HA-2600 (METAL CAN)
DATASHEET 2MHz, High Input Impedance Operational Amplifier is an internally compensated bipolar operational amplifier that features very high input impedance (5M coupled with wideband AC performance. The
More informationDATASHEET E L2276. Features. Ordering Information. Applications. Pinout EL2276 (14-PIN SO) TOP VIEW. 70MHz/1mA Current Mode Feedback Amp w/disable
70MHz/1mA Current Mode Feedback Amp w/disable NOT RECOMMENDED FOR NEW DESIGNS NO RECOMMENDED REPLACEMENT contact our Technical Support Center at 1-888-INTERSIL or www.intersil.com/tsc DATASHEET FN7054
More informationDATASHEET HFA1112. Features. Applications. Related Literature. Pin Descriptions. Ordering Information
DATASHEET HFA1112 85MHz, Low Distortion Programmable Gain Buffer Amplifiers FN2992 Rev 8. July 27, 25 The HFA1112 is a closed loop Buffer featuring user programmable gain and ultra high speed performance.
More information60MHz Rail-to-Rail Input-Output Operational Amplifier
6MHz Rail-to-Rail Input-Output Operational Amplifier EL52T The EL52T is a high voltage rail-to-rail input-output amplifier with low power consumption. The EL52T contains two amplifiers. Each amplifier
More informationDATASHEET EL5420T. Features. Applications. Ordering Information. 12MHz Rail-to-Rail Input-Output Operational Amplifier. FN6838 Rev 1.
DATASHEET EL542T 2MHz Rail-to-Rail Input-Output Operational Amplifier The EL542T is a low power, high voltage rail-to-rail input-output amplifier. The EL542T contains four amplifiers. Each amplifier exhibits
More informationDATASHEET. Features. Applications. Related Literature ISL V, Low Quiescent Current, 50mA Linear Regulator. FN7970 Rev 2.
DATASHEET ISL8136 4V, Low Quiescent Current, 5mA Linear Regulator The ISL8136 is a high voltage, low quiescent current linear regulator ideally suited for always-on and keep alive applications. The ISL8136
More informationDATASHEET HA Features. Applications. Ordering Information. Pinout. 400MHz, Fast Settling Operational Amplifier. FN2897 Rev.5.
DATASHEET MHz, Fast Settling Operational Amplifier The Intersil is a wideband, very high slew rate, monolithic operational amplifier featuring superior speed and bandwidth characteristics. Bipolar construction
More informationDATASHEET EL7202, EL7212, EL7222. Features. Pinouts. Applications. High Speed, Dual Channel Power MOSFET Drivers. FN7282 Rev 2.
DATASHEET EL7202, EL7212, EL7222 High Speed, Dual Channel Power MOSFET Drivers FN7282 Rev 2.00 The EL7202, EL7212, EL7222 ICs are matched dual-drivers that improve the operation of the industry standard
More informationData Sheet September 3, Features TEMP. RANGE ( C)
Data Sheet FN6387. Power Line Communication (PLC) The ISL57 is a dual operational amplifier designed for PLC line driving in OFDM and SSC based solutions. This device features a high drive capability of
More informationDATASHEET ISL9021A. Features. Pinouts. Applications. 250mA Single LDO with Low I Q, Low Noise and High PSRR LDO. FN6867 Rev 2.
NOT RECOMMENDED FOR NEW DESIGNS RECOMMENDED REPLACEMENT PART ISL9021A 250mA Single LDO with Low I Q, Low Noise and High PSRR LDO DATASHEET FN6867 Rev 2.00 The ISL9021 is a single LDO providing high performance
More informationPOSSIBLE SUBSTITUTE PRODUCT HA-2525, HA-2842
HA511 1MHz, Low Noise, Operational Amplifiers OBSOLETE PRODUCT POSSIBLE SUBSTITUTE PRODUCT HA2525, HA282 DATASHEET FN295 Rev 5. May 2 The HA511 is a dielectrically isolated operational amplifier featuring
More informationDATASHEET. Features. Applications. Pinouts EL5160 (8 LD SOIC) TOP VIEW EL5160, EL5161, EL5260, EL5261, EL5360
DATASHEET EL6, EL6, EL6, EL6, EL6 MHz LowPower Current Feedback Amplifiers The EL6, EL6, EL6, EL6, and EL6 are current feedback amplifiers with a bandwidth of MHz and operate from just.7ma supply current.
More informationDATASHEET HA5023. Features. Applications. Ordering Information. Pinout. Quad 125MHz Video CurrentFeedback Amplifier with Disable
HA2 NOT RECOMMENDED FOR NEW DESIGNS RECOMMENDED REPLACEMENT PART HA23 Quad 12MHz Video CurrentFeedback Amplifier with Disable DATASHEET FN3 Rev 6. February 8, 26 The HA2 is a quad version of the popular
More informationFeatures V OUT = 12V IN TEMPERATURE ( C) FIGURE 3. QUIESCENT CURRENT vs LOAD CURRENT (ADJ VERSION AT UNITY GAIN) V IN = 14V
DATASHEET ISL7831 4V, Low Quiescent Current, 15mA Linear Regulator for Automotive Applications FN675 Rev 2. The ISL7831 is a high voltage, low quiescent current linear regulator ideally suited for always-on
More informationDATASHEET EL2186, EL2286. Features. Applications. Ordering Information. Pinouts. 250MHz/3mA Current Mode Feedback Amp w/disable
DATASHEET EL2186, EL2286 250MHz/3mA Current Mode Feedback Amp w/disable The EL2186/EL2286 are single/dual current-feedback operational amplifiers which achieve a -3dB bandwidth of 250MHz at a gain of +1
More informationDATASHEET. Features. Applications. Ordering Information. Related Literature ISL MHz, Dual Precision Rail-to-Rail Input-Output (RRIO) Op Amps
DATASHEET ISL28236 5MHz, Dual Precision Rail-to-Rail Input-Output (RRIO) Op Amps FN6921 Rev 2. July 24, 214 The ISL28236 is a low-power dual operational amplifier optimized for single supply operation
More informationDATASHEET EL9110. Features. Applications. Ordering Information. Pinout. Differential Receiver/Equalizer. FN7305 Rev 5.
DATASHEET EL9 Differential Receiver/Equalizer FN735 Rev 5. The EL9 is a single channel differential receiver and equalizer. It contains a high speed differential receiver with 5 programmable poles. The
More informationDATASHEET HA-5137A. Features. Applications. Ordering Information. Pinout. 63MHz, Ultra-Low Noise Precision Operational Amplifier
DATASHEET HA-5137A 3MHz, Ultra-Low Noise Precision Operational Amplifier The HA-5137 operational amplifier features an unparalleled combination of precision DC and wideband high speed characteristics.
More informationPOSSIBLE SUBSTITUTE PRODUCT HA-2842, HA-2544
OBSOLETE PRODUCT POSSIBLE SUBSTITUTE PRODUCT HA2842, HA2544 5MHz, Fast Settling, Unity Gain Stable, Video Operational Amplifier DATASHEET FN2843 Rev 4. The HA2841 is a wideband, unity gain stable, operational
More informationDATASHEET. Features. Applications. Related Literature ISL MHz Multiplexing Amplifier. FN7459 Rev 2.00 Page 1 of 13.
DATASHEET ISL5942 4MHz Multiplexing Amplifier The ISL5942 is a 42MHz bandwidth 2: multiplexing amplifier designed primarily for video switching. This Mux-amp has user-settable gain and also feature a high
More informationHA Features. 12MHz, High Input Impedance, Operational Amplifier. Applications. Pinout. Part Number Information. Data Sheet May 2003 FN2893.
OBSOLETE PRODUCT POSSIBLE SUBSTITUTE PRODUCT HA-2525 HA-2515 Data Sheet May 23 FN2893.5 12MHz, High Input Impedance, Operational Amplifier HA-2515 is a high performance operational amplifier which sets
More informationHA5023. Dual 125MHz Video Current Feedback Amplifier. Features. Applications. Ordering Information. Pinout. Data Sheet September 30, 2015 FN3393.
HA523 Data Sheet September 3, 215 FN3393.9 Dual 125MHz Video Current Feedback Amplifier The HA523 is a wide bandwidth high slew rate dual amplifier optimized for video applications and gains between 1
More informationTEMP. PKG. -IN 1 16 S/H CONTROL PART NUMBER RANGE
DATASHEET 7ns, Low Distortion, Precision Sample and Hold Amplifier FN59 Rev 5. The combines the advantages of two sample/ hold architectures to create a new generation of monolithic sample/hold. High amplitude,
More informationEL5150, EL5151, EL5250, EL5251, EL5451
EL, EL, EL, EL, EL Data Sheet January 6, 8 FN78.7 MHz Amplifiers The EL, EL, EL, EL, and EL are MHz bandwidth db voltage mode feedback amplifiers with DC accuracy of.%, mv offsets and kv/v open loop gains.
More informationHA Features. 650ns Precision Sample and Hold Amplifier. Applications. Functional Diagram. Ordering Information. Pinout
HA-50 Data Sheet June 200 FN2858.5 650ns Precision Sample and Hold Amplifier The HA-50 is a very fast sample and hold amplifier designed primarily for use with high speed A/D converters. It utilizes the
More informationDATASHEET. Features. Applications. Pin Configurations EL8176. Micropower Single Supply Rail-to-Rail Input/Output Precision Op Amp
DATASHEET EL876 Micropower Single Supply Rail-to-Rail Input/Output Precision Op Amp FN76 Rev 9. January 6, 5 The EL876 is a precision low power, operational amplifier. The device is optimized for single
More informationDATASHEET HA4314B. Features. Ordering Information. Applications. Truth Table. 400MHz, 4x1 Video Crosspoint Switch. FN3679 Rev 12.
DATASHEET B 4MHz, 4x1 Video Crosspoint Switch FN3679 Rev 12. The B is a very wide bandwidth 4x1 crosspoint switch ideal for professional video switching, HDTV, computer monitor routing, and other high
More informationDATASHEET. Features. Applications. Related Literature ISL1550. Single Port, VDSL2 Differential Line Driver. FN6795 Rev 0.
DATASHEET ISL155 Single Port, VDSL2 Differential Line Driver The ISL155 is a dual operational amplifier intended to be used as a differential line driver. ISL155 s high bandwidth and low distortion performance
More informationDATASHEET ISL Features. Applications. Ordering Information. Typical Application Circuit. MMIC Silicon Bipolar Broadband Amplifier.
ISL55 MMIC Silicon Bipolar Broadband Amplifier NOT RECOMMENDED FOR NEW DESIGNS NO RECOMMENDED REPLACEMENT contact our Technical Support Center at 1-888-INTERSIL or www.intersil.com/tsc DATASHEET FN17 Rev.
More informationDATASHEET HI-200, HI-201. Features. Applications. Ordering Information. Functional Diagram. Dual/Quad SPST, CMOS Analog Switches
DATASHEET HI-200, HI-201 Dual/Quad SPST, CMOS Analog Switches HI-200/HI-201 (dual/quad) are monolithic devices comprising independently selectable SPST switches which feature fast switching speeds (HI-200
More informationHA MHz, PRAM Four Channel Programmable Amplifiers. Features. Applications. Pinout. Ordering Information
HA0 Data Sheet August 00 FN89. 0MHz, PRAM Four Channel Programmable Amplifiers The HA0 comprise a series of fourchannel programmable amplifiers providing a level of versatility unsurpassed by any other
More informationHA Features. Quad, 3.5MHz, Operational Amplifier. Applications. Pinout. Ordering Information. Data Sheet July 2004 FN2922.5
HA-4741 Data Sheet July 24 FN2922. Quad, 3.MHz, Operational Amplifier HA-4741, which contains four amplifiers on a monolithic chip, provides a new measure of performance for general purpose operational
More informationDATASHEET. Features. Applications. Pin Configuration HA-5147 (CERDIP) TOP VIEW. Ordering Information HA-5147
DATASHEET HA-517 12MHz, Ultra-Low Noise Precision Operational Amplifiers FN291 Rev 1. The HA-517 operational amplifier features an unparalleled combination of precision DC and wideband high speed characteristics.
More informationDATASHEET HC5503T. Features. Applications. Ordering Information. Block Diagram. Balanced PBX/Key System SLIC, Subscriber Line Interface Circuit
NOT RECOMMENDED FOR NEW DESIGNS RECOMMENDED REPLACEMENT PART HC5503PRC Balanced PBX/Key System SLIC, Subscriber Line Interface Circuit DATASHEET FN4506 Rev 2.00 The Intersil HC5503T is a low cost Subscriber
More informationDATASHEET ISL Features. Applications. Simplified Block Diagram. Pinout. Ordering Information. Pin Descriptions
DATASHEET ISL99 Non-Linear Output Current, Low Power Ambient Light Photo Detect IC FN8 Rev. The ISL99 is a light-to-current silicon optical sensor combining a photodiode and current amplifiers on a single
More informationDATASHEET HFA1130. Features. Ordering Information. Applications. The Op Amps with Fastest Edges. Pinout
DATASHEET HFA113 8MHz, Output Limiting, Low Distortion Current Feedback Operational Amplifier FN339 Rev. April 2, 213 The HFA113 is a high speed wideband current feedback amplifier featuring programmable
More informationDATASHEET EL4332. Features. Applications. Pinout. Ordering Information. Demo Board. Triple 2:1 300MHz Mux-Amp AV = 2. FN7163 Rev 2.
DATASHEET EL4332 Triple 2:1 300MHz Mux-Amp AV = 2 FN7163 Rev 2.00 The EL4332 is a triple very high speed 2:1 Multiplexer- Amplifier. It is intended primarily for component video multiplexing and is especially
More informationDATASHEET. Features. Ordering Information. Applications. Related Literature ISL28191, ISL28291
DATASHEET Single and Dual Single Supply Ultra-Low Noise, Low Distortion Rail-to-Rail Output, Op Amp FN656 Rev. The ISL89 and ISL89 are tiny single and dual ultra-low noise, ultra-low distortion operational
More informationDATASHEET ISL6208. Features. Applications. Related Literature. Ordering Information. Pinout. High Voltage Synchronous Rectified Buck MOSFET Driver
NOT RECOMMENDED FOR NEW DESIGNS POSSIBLE SUBSTITUTE PRODUCT ISL6208 High Voltage Synchronous Rectified Buck MOSFET Driver DATASHEET FN9047 Rev 0.00 The ISL6205 is a high-voltage, high-frequency, dual MOSFET
More informationKM4110/KM mA, Low Cost, +2.7V & +5V, 75MHz Rail-to-Rail Amplifiers
+ + www.fairchildsemi.com KM411/KM41.5mA, Low Cost, +.7V & +5V, 75MHz Rail-to-Rail Amplifiers Features 55µA supply current 75MHz bandwidth Power down to I s = 33µA (KM41) Fully specified at +.7V and +5V
More informationHA Features. 400MHz, Fast Settling Operational Amplifier. Applications. Ordering Information. Pinout. Data Sheet August 2002 FN2897.
HA-5 Data Sheet August FN97. MHz, Fast Settling Operational Amplifier The Intersil HA-5 is a wideband, very high slew rate, monolithic operational amplifier featuring superior speed and bandwidth characteristics.
More informationDATASHEET EL4093. Features. Applications. Pinout. Ordering Information. Demo Board. 300MHz DC-Restored Video Amplifier. FN7159 Rev 0.
300MHz DC-Restored Video Amplifier OBSOLETE PRODUCT NO RECOMMENDED REPLACEMENT contact our Technical Support Center at 1-888-INTERSIL or www.intersil.com/tsc DATASHEET FN7159 Rev 0.00 The EL4093 is a complete
More informationFeatures. NOTE: Non-designated pins are no connects and are not electrically connected internally.
OBSOLETE PRODUCT NO RECOMMENDED REPLACEMENT contact our Technical Support Center at 1-888-INTERSIL or www.intersil.com/tsc Data Sheet December 1995, Rev. G EL2001 FN7020 Low Power, 70MHz Buffer Amplifier
More informationHA Features. 100MHz Current Feedback Video Amplifier With Disable. Applications. Pinout. Data Sheet May 21, 2013 FN
HA- Data Sheet May, FN8. MHz Current Feedback Video Amplifier With Disable The HA- is a wide bandwidth, high slew rate amplifier optimized for video applications and gains between and. Manufactured on
More informationHA Microsecond Precision Sample and Hold Amplifier. Features. Applications. Pinouts. Ordering Information. Data Sheet August 24, 2005 FN2857.
Data Sheet FN85. Microsecond Precision Sample and Hold Amplifier The was designed for use in precision, high speed data acquisition systems. The circuit consists of an input transconductance amplifier
More informationDATASHEET CA3054. Features. Applications. Ordering Information. Pinout. Dual Independent Differential Amp for Low Power Applications from DC to 120MHz
DATASHEET CA5 Dual Independent Differential Amp for Low Power Applications from DC to MHz FN88 Rev.. Jan, 7 The CA5 consists of two independent differential amplifiers with associated constant current
More information