ST 3000 Smart Transmitter Series 900 Absolute Pressure Models Specifications

Transcription

1 ST 3000 Smart Transmitter Series 900 Asolute Pressure Models Specifications 34-ST August 2011 Introduction In 1983, Honeywell introduced the first Smart Pressure Transmitter the ST In 1989, Honeywell launched the first all digital, i-directional protocol for smart field devices. Today, its ST 3000 Series 900 Pressure Transmitters continue to ring proven smart technology to a wide spectrum of pressure measurement applications. Honeywell asolute pressure transmitters STA92L, STA94L, STA97L and STA922, STA940 are used in applications in which high accuracy in the vacuum range of pressure is needed. Typical applications include lowpressure measurement in vacuum distillation columns, where energy savings are directly proportional to the vacuum in the column. Honeywell STA92L/STA94L and STA922/STA940 transmitters can e used in a wide spectrum of hazardous environments in perfect safety to provide proven, repeatale pressure measurements. Models STA922 0 to 780 mmhga 0 to 1,040 mara STA92L 0 to 780 mmhga 0 to 1,040 mara STA940 0 to 500 psia 0 to 35 ara STA94L 0 to 500 psia 0 to 35 ara STA97L 0 to 3,000 psia 0 to ara All ST 3000 transmitters can e ordered to provide one of the following output communication options. Communications options 4-20 ma Honeywell Digitally Enhanced (DE) HART (versions 5.x or 6.x) FOUNDATION Fieldus Figure 1 On the left is an In-line Models STA92L, STA94L and STA97L and on the right is Model STA922, STA940. All Series 900 Asolute Pressure Transmitters feature proven piezoresistive sensor technology When digitally integrated with Honeywell s Process Knowledge System, EXPERION PKS. ST 3000 instruments provide a more accurate process variale as well as advanced diagnostics. Honeywell s cost-effective ST 3000 S900 transmitters lead the industry in: Staility Reliaility ST 3000 S900 Transmitter Benefits Staility = ±0.01% per year Reliaility = 470 years MTBF The devices provide comprehensive self-diagnostics to help users maintain high uptime, meet regulatory requirements, and attain high quality standards. S900 transmitters allow smart performance at analog prices. Accurate, reliale and stale, Series 900 transmitters offer greater turndown ratio than conventional transmitters.

2 ST 3000 Smart Pressure Transmitter 2 Description The ST 3000 transmitter can replace any 4 to 20 ma output transmitter in use today and operates over a standard two-wire system. The measuring means is a piezoresistive sensor, which actually contains three sensors in one. It contains a differential pressure sensor, a temperature sensor, and a static pressure sensor. Microprocessor-ased electronics provide higher spanturndown ratio, improved temperature and pressure compensation, and improved accuracy. The transmitter s meter ody and electronics housing resist shock, viration, corrosion, and moisture. The electronics housing contains a compartment for the single-oard electronics, which is isolated from an integral junction ox. The single-oard electronics is replaceale and interchangeale with any other ST 3000 Series 100 or Series 900 model transmitters. Like other Honeywell transmitters, the ST 3000 features two-way communication and configuration capaility etween the operator and the transmitter through several Honeywell field-rated portale configuration devices, including the Smart Field Communicator (SFC) and the Multiple Communication Configurator (MC ToolKit). While oth are made for in-field use, the MC Toolkit also can e ordered for use in intrinsically safe environments. Features Choice of linear or square root output conformity is a simple configuration selection. Direct digital integration with Experion PKS and other control systems provides local measurement accuracy to the system level without adding typical A/D and D/A converter inaccuracies. Unique piezoresistive sensor automatically compensates input for temperature and static pressure. Added smart features include configuring lower and upper range values, simulating accurate analog output, and selecting preprogrammed engineering units for display. Smart transmitter capailities with local or remote interfacing means significant manpower efficiency improvements in commissioning, start-up, and ongoing maintenance functions. ST 3000 transmitters feature full Dual-Seal certification ased on ANSI/NFPA and ANSI/ISA requirements without the use of additional seal protection elements. ST 3000 transmitters are availale fully compliant to SIL 2/3 requirements as a standard option. Advanced Diagnostics The SCT 3000 Smartline Configuration Toolkit provides an easy way to configure instruments using a personal computer. The toolkit enales configuration of devices efore shipping or installation. The SCT 3000 can operate in the offline mode to configure an unlimited numer of devices. The dataase can then e loaded down-line during commissioning. ST 3000 is now availale for oth HART 6 and Foundation TM Fieldus with advanced diagnostics that minimize unplanned plant outages, minimize maintenance costs and y providing the industry s most reliale transmitter. Provide advanced warning of possile failure events and avoid costly shutdowns. Three levels of failure reporting Comprehensive list of on-oard diagnostics (Ref. ST 3000 User manual with HART 6, 34-ST Rev: June 09 and Foundation TM Fieldus option manual 34-ST Rev: June 09)

3 ST 3000 Smart Pressure Transmitter 3 Operating Conditions All Models Parameter Reference Condition Rated Condition Operative Limits Transportation and Storage C F C F C F C F Amient Temperature 25±1 77±2-25 to to to to to to 257 Meter Body Temperature STA922/STA92L 25±1 77±2 See Figure 2 See Figure 2-55 to to 257 STA940/STA94L 25±1 77±2-25 to to to to to to 257 STA97L 25±1 77±2-25 to to to to to to 257 Humidity %RH 10 to 55 0 to to to 100 Vacuum Region, Minimum Pressure STA922/STA92L STA940/STA94L STA97L Supply Voltage, Current, and Load Resistance Maximum Allowale Working Pressure (MAWP) 4 (ST 3000 products are rated to Maximum Allowale Working Pressure. MAWP depends on Approval Agency and transmitter materials of construction.) 4 Consult factory for MAWP of ST 3000 transmitters with CSA approval. See Figure 2. Operate within specifications aove 25 mmhga (33 mara). Short term exposure (2 hours at 70 C/158 F) to full vacuum will not result in damage. Voltage Range: 10.8 to 42.4 Vdc at terminals Current Range: 3.0 to 21.8 ma Load Resistance: 0 to 1,440 ohms (as shown in Figure 3) STA922/STA92L = 780 mmhga, 1,040 mara STA940/STA94L = 500 psia, ara STA97L = 3,000 psia, ara Units can withstand overpressure of 1.5X MAWP without damage Loop Resistance (ohms) Note: A minimum of 250 ohms of loop resistance is necessary to support communications. Loop resistance equals arrier resistance plus wire resistance plus receiver resistance. 250 = Operating Area Operating Voltage (Vdc) Figure 3 Supply voltage and loop resistance chart

4 ST 3000 Smart Pressure Transmitter ] [ ] [ Rated Operating Area Operative Limi t 3 2 Silicone Oil DC-200 Measured Pressure mmhg A 25 mmhga (33.3 mara) CTFE Silicone Oil DC 704 LEGEND: ] [ Rated operating area Contact Marketing Applications for "special" quote. NOTE: Short term exposure (2 hours at 70 C/158 F) to hard vacuum will not result in damage. 0.1 ] [ ÞC ÞF Meter Body Temperature Figure 2 Measured pressure versus meter ody temperature chart for model STA922/STA92L

5 ST 3000 Smart Pressure Transmitter 5 Performance under Rated Conditions* - Model STA922 (0 to 780 mmhga/1,040 mara) Parameter Description Upper Range Limit Minimum Span mmhga mara mmhga mara 780 (39.2F/4C is standard reference temperature for inh 2 O range.) 1, Turndown Ratio 15 to 1 Zero Suppression No limit except minimum span within 0 (zero) to +100% URL. Accuracy (Reference Includes comined effects of linearity, hysteresis, and repeataility) Accuracy includes residual error after averaging successive readings. For FOUNDATION TM Fieldus use Digital Mode specifications. For HART use Analog Mode specifications. Zero Temperature Effect per 28C (50F) Comined Zero and Span Temperature Effect per 28C (50F) In Analog Mode: ±0.10% of calirated span or upper range value (URV), whichever is greater, terminal ased. For URV elow reference point (90 mmhga), accuracy equals: 90 mmhga 120 mara or 0.05 span mmhga span mara 0.05 in % of span In Digital Mode: ±0.075% of calirated span or upper range value (URV), whichever is greater, terminal ased. For URV elow reference point (90 mmhga), accuracy equals: 90 mmhga 120 mara or 0.05 span mmhga span mara In Analog Mode: ±0.1625% of span. For URV elow reference point (300 mmhga), effect equals: in % of span 300 mmhga 400 mara or 0.15 span mmhga span mara span In Digital Mode: ±0.15% of span. For URV elow reference point (300 mmhga), effect equals: ±0.10 ( 300 mmhga ) span mmhga or ±0.10 ( 400 mara span mara ) in % of in % of span In Analog Mode: ±0.25% of span. For URV elow reference point (300 mmhga), effect equals: 300 mmhga 400 mara or 0.15 span mmhga span mara In Digital Mode: ±0.225% of span. For URV elow reference point (300 mmhga), effect equals: 0.10 in % of span 300 mmhga 400 mara or 0.15 span mmhga span mara 0.75 in % of span * Performance specifications are ased on reference conditions of 25 C (77 F), 10 to 55% RH, and 316L Stainless Steel arrier diaphragm.

6 ST 3000 Smart Pressure Transmitter 6 Performance under Rated Conditions* - Model STA92L (0 to 780 mmhga/1,040 mara) Parameter Description Upper Range Limit Minimum Span mmhga mara mmhga mara 780 (0 C/32 F is standard reference temperature for mmhg range.) 1, Turndown Ratio 15 to 1 Zero Suppression No limit except minimum span within 0 (zero) to +100% URL. Accuracy (Reference Includes comined effects of linearity, hysteresis, and repeataility) Accuracy includes residual error after averaging successive readings. For FOUNDATION TM Fieldus use Digital Mode specifications. For HART use Analog Mode specifications. Zero Temperature Effect per 28C (50F) In Analog Mode: ±0.10% of calirated span or upper range value (URV), whichever is greater, terminal ased. For URV elow reference point (90 mmhga), accuracy equals: 90 mmhga 120 mara or 0.05 span mmhga span mara 0.05 in % of span In Digital Mode: ±0.075% of calirated span or upper range value (URV), whichever is greater, terminal ased. For URV elow reference point (90 mmhga), accuracy equals: 90 mmhga 120 mara or 0.05 span mmhga span mara In Analog Mode: ±0.2125% of span. For URV elow reference point (300 mmhga), effect equals: in % of span 300 mmhga 400 mara or 0.20 span mmhga span mara in % of span Comined Zero and Span Temperature Effect per 28C (50F) In Digital Mode: ±0.20% of span. For URV elow reference point (300 mmhga), effect equals: ±0.20 ( 300 mmhga ) span mmhga or ±0.20 ( 400 mara span mara ) in % of span In Analog Mode: ±0.30% of span. For URV elow reference point (300 mmhga), effect equals: 300 mmhga 400 mara or 0.20 span mmhga span mara 0.10 in % of span In Digital Mode: ±0.275% of span. For URV elow reference point (300 mmhga), effect equals: 300 mmhga 400 mara or 0.20 span mmhga span mara in % of span * Performance specifications are ased on reference conditions of 25 C (77 F), 10 to 55% RH, and 316L Stainless Steel arrier diaphragm.

7 ST 3000 Smart Pressure Transmitter 7 Performance under Rated Conditions* - Models STA940/STA94L (0 to 500 psia/35 ara) Parameter Description Upper Range Limit Minimum Span psia ara psia mara Turndown Ratio 100 to 1 Zero Suppression No limit except minimum span within 0 (zero) to +100% URL. Accuracy (Reference Includes comined effects of linearity, hysteresis, and repeataility) Accuracy includes residual error after averaging successive readings. For FOUNDATION TM Fieldus use Digital Mode specifications. For HART use Analog Mode specifications. Zero Temperature Effect per 28C (50F) Comined Zero and Span Temperature Effect per 28C (50F) In Analog Mode: ±0.10% of calirated span or upper range value (URV), whichever is greater, terminal ased. For URV elow reference point (20 psia), accuracy equals: 20 psia 1.4 ara or 0.05 span psia span ara 0.05 in % of span In Digital Mode: ±0.075% of calirated span or upper range value (URV), whichever is greater, terminal ased. For URV elow reference point (20 psia), accuracy equals: 20 psia 1.4 ara or 0.05 span psia span ara In Analog Mode: ±0.1625% of span. For URV elow reference point (50 psia), effect equals: in % of span 50 psia 3.5 ara or 0.15 span psia span ara In Digital Mode: ±0.15% of span. For URV elow reference point (50 psia), effect equals: ±0.15 ( 50 psia ) span psia or ±0.15 ( 3.5 ara span ara ) in % of span in % of span In Analog Mode: ±0.25% of span. For URV elow reference point (50 psia), effect equals: 50 psia 3.5 ara or 0.15 span psia span ara In Digital Mode: ±0.225% of span. For URV elow reference point (50 psia), effect equals: 0.10 in % of span 50 psia 3.5 ara or 0.15 span psia span ara in % of span * Performance specifications are ased on reference conditions of 25 C (77 F), 10 to 55% RH, and 316L Stainless Steel arrier diaphragm.

8 ST 3000 Smart Pressure Transmitter 8 Performance under Rated Conditions* - Models STA97L (0 to 3,000 psia/35 ara) Parameter Description Upper Range Limit Minimum Span psia ara psia mara 3, Turndown Ratio 100 to 1 Zero Suppression No limit except minimum span within 0 (zero) to +100% URL. Accuracy (Reference Includes comined effects of linearity, hysteresis, and repeataility) Accuracy includes residual error after averaging successive readings. For FOUNDATION TM Fieldus use Digital Mode specifications. For HART use Analog Mode specifications. Zero Temperature Effect per 28C (50F) Comined Zero and Span Temperature Effect per 28C (50F) In Analog Mode: ±0.075% of calirated span or upper range value (URV), whichever is greater, terminal ased. For URV calirated elow reference point (750 psia), accuracy equals: 750 psia 51.7 ara or 0.05 span psia span ara in % of span In Digital Mode: ±0.0625% of calirated span or upper range value (URV), whichever is greater, terminal ased. For URV calirated elow reference point (750 psia), accuracy equals: 750 psia 51.7 ara or 0.05 span psia span ara In Analog Mode: ±0.1125% of calirated span. For URV elow reference point (500 psia), effect equals: in % of span 500 psia ara or 0.10 span psia span ara In Digital Mode: ±0.05% of calirated span. For URV elow reference point (500 psia), effect equals: 500 psia ara 0.10 or 0.10 in % of span span psia span ara In Analog Mode: ±0.175% of calirated span. For URV elow reference point (500 psia), effect equals: in % of span 500 psia ara or 0.10 span psia span ara In Digital Mode: ±0.075% of calirated span. For URV elow reference point (500 psia), effect equals: in % of span 500 psia ara or 0.10 span psia span ara 0.05 in % of span * Performance specifications are ased on reference conditions of 25 C (77 F), 10 to 55% RH, and 316L Stainless Steel arrier diaphragm.

9 ST 3000 Smart Pressure Transmitter 9 Performance under Rated Conditions All Models Parameter Description Output (two-wire) Supply Voltage Effect Damping Time Constant NAMUR NE 43 Compliance (Option NE ) SIL 2/3 Compliance Lightning Protection Option (Code LP ) Analog 4 to 20 ma or DE digital communications mode. Options availale for FOUNDATION TM Fieldus and HART protocol % span per volt. Adjustale from 0 to 32 seconds digital damping. Transmitter failure information is generated when the measuring information is invalid or no longer present. Failure information is transmitted as a current signal ut outside the normal 4-20 ma measurement signal level. Transmitter failure values are: 3.6 ma and 21.0 ma. The normal signal range is 3.8 ma and 20.5 ma. SIL certified to IEC for non-redundant use in SIL 2 related Safety Systems (single use) and for redundant (multiple) use in SIL 3 Safety Systems through TÜV Nord Sys Tec GmH & Co. KG under the following standards: IEC : 1998; IEC : 2000; IEC : Leakage Current: 10 microamps 42.4 VDC, 93 C Impulse Rating: 10/20 µ sec. 5,000 Amps (50 strikes) 10,000 Amps (20 strikes) (rise/decay) 10/1,000 µ sec. 250 Amps (1,000 strikes) 500 Amps (400 strikes)

10 ST 3000 Smart Pressure Transmitter 10 Physical and Approval Bodies Parameter Description Barrier Diaphragms Material 316L SS, Hastelloy C Process Head Material STA922/STA940: 316 SS 4, Caron Steel (zinc-plated) 5, Hastelloy C STA92L/STA94L/STA97L: 316 SS 4 Head Gaskets Meter Body Bolting Mounting Bracket Vent/Drain Valves & Plugs 1 Fill Fluid Electronic Housing Process Connections Wiring Mounting STA922/STA940: Viton is standard. Graphite is also optional. STA922/STA940: Caron Steel (zinc-plated, standard) 5 or A286 SS (NACE) olts and 302/304 SS (NACE) nuts for heads. Caron Steel (zinc-plated) or Stainless Steel angle racket or Caron Steel flat racket availale. 316 SS 4, Hastelloy C-276 2, Monel (Models STA922 and STA940 only) Silicone DC 200 oil or CTFE (Chlorotrifluoroethylene) Note that DC 704 is availale Please contact Product Marketing. Epoxy-Polyester hyrid paint. Low Copper-Aluminum. Meets NEMA 4X (watertight) and NEMA 7 (explosion proof). Stainless steel optional. STA922/STA940: 1/2-inch F-NPT, DIN STA92L/STA94L/STA97L: 1/2-inch F-NPT, 1/2 inch M-NPT, 9/16 AMINCO, DIN Accepts up to 16 AWG (1.5 mm diameter). Can e mounted in virtually any position using the standard mounting racket. Bracket is designed to mount on 2-inch (50 mm) vertical or horizontal pipe. See Figures 4 and 4a. Dimensions See Figures 5 and 5a. Net Weight STA922/STA940: 7.0 pounds (3.2 Kg) STA92L/STA94L: 3.8 pounds (1.7 kg) 1 Vent/Drains are sealed with Teflon or PTFE 2 Hastelloy C-276 or UNS N Supplied as 316 SS or as Grade CF8M, the casting equivalent of 316 SS. 5 Caron Steel heads are zinc-plated and not recommended for water service due to hydrogen migration. For that service, use 316 stainless steel wetted Process Heads. 6 Hastelloy C-276 or UNS N Supplied as indicated or as Grade CW12MW, the casting equivalent of Hastelloy C-276 Note: Pressure transmitters that are part of safety equipment for the protection of piping (systems) or vessel(s) from exceeding allowale pressure limits, (equipment with safety functions in accordance with Pressure Equipment Directive 97/23/EC article 1, 2.1.3), require separate examination

11 ST 3000 Smart Pressure Transmitter 11 Certifications FM Approvals SM Type of Protection Comm. Option Field Parameters Temp. Codes Explosionproof: Class I, Division 1, Groups A, B, C, D locations Dust Ignition Proof: Class II,, Division 1, Groups E, F, G locations, Enclosure Type 4X Intrinsically Safe: Class I, II,, Division 1, Groups A, B, C, D, E, F, G locations, Enclosure Type 4X Intrinsically Safe: Class I, II,, Division 1, Groups A, B, C, D, E, F, G locations; Class 1, Zone 0, AEx ia Group IIC, Enclosure Type 4X / IP 66/67 Nonincendive: Class I, Division 2, Groups A, B, C, D locations, Enclosure Type 4X Nonincendive: Class I, Division 2, Groups A, B, C, D; Suitale for: Class II, Division 2, Groups F&G; Class, Division 2; Class I, Zone 2, Group IIC, Enclosure Type 4X / IP 66/67 * Li = 0 except Li = 150µH when Option ME, Analog Meter, is selected. FM Approvals SM is a service mark of FM Gloal All All T5 Ta = 93ºC 4-20 ma / DE 4-20 ma / Fieldus Entity (Not FISCO) Fieldus Entity (Not FISCO) FISCO 4-20 ma / DE 4-20 ma / HART Fieldus Entity (Not FNICO) Fieldus Entity (Not FNICO) FNICO Vmax = 42.4V Imax = 225mA Vmax = 30V Imax = 225mA Vmax = 32V Imax = 120mA Li = 0 Pi =0.84W Vmax = 24V Imax = 250mA Li = 0 Vmax = 17.5V Imax = 380mA Li = 0 Pi =5.32W Vmax = 42.4V Imax = 225mA Vmax = 30V Imax = 225mA Vmax = 32V Imax = 120mA Li = 0 Pi =0.84W Vmax = 24V Imax = 250mA Li = 0 Vmax = 32V Li = 0 T4 Ta = 93ºC T4 Ta = 93ºC T4 Ta = 40ºC T3 Ta = 93ºC T4 Ta = 40ºC T3 Ta = 93ºC T4 Ta = 40ºC T3 Ta = 93ºC T4 Ta = 93ºC T4 Ta = 93ºC T4 Ta = 40ºC T3 Ta = 93ºC T4 Ta = 40ºC T3 Ta = 93ºC T4 Ta = 40ºC T3 Ta = 93ºC

12 ST 3000 Smart Pressure Transmitter 12 Type of Protection Comm. Option Field Parameters Temp. Codes Canadian Standards Association (CSA) Explosion Proof: Class I, Division 1, Groups B, C, D locations Dust Ignition Proof: Class II,, Division 1, Groups E, F, G locations, Enclosure Type 4X Intrinsically Safe: Class I, II,, Division 1, Groups A, B, C, D, E, F, G locations, Enclosure Type 4X Nonincendive: Class I, Division 2, Groups A, B, C, D locations, Enclosure Type 4X Canadian Registration Numer (CRN): All All T4 Ta = 93ºC 4-20 ma / DE 4-20 ma / HART Fieldus Entity (Not FISCO) 4-20 ma / DE 4-20 ma / HART Fieldus Entity (Not FNICO) Vmax = 42V Imax = 225mA Vmax = 42V Imax = 225mA Vmax = 24V Imax = 250mA Li = 0 Vmax = 42.4V Imax = 225mA Vmax = 30V Imax = 225mA Vmax = 24V Imax = 250mA Li = 0 T4 Ta = 93ºC T4 Ta = 93ºC T4 Ta = 40ºC T3 Ta = 93ºC T4 Ta = 93ºC T4 Ta = 93ºC T4 Ta = 40ºC T3 Ta = 93ºC All ST 3000 models except STG19L, STG99L, STG170 and STG180 have een registered in all provinces and territories in Canada and are marked CRN: 0F8914.5C.

13 ST 3000 Smart Pressure Transmitter 13 Type of Protection Comm. Option Field Parameters Temp. Codes IECEx International Electrotechnical Commission (LCIE) Flameproof, Zone 1: Ex d IIC, Intrinsically Safe, Zone 0/1: Ex ia IIC, * Li = 0 except Li = 150µH when Option ME, Analog Meter, is selected. All 4-20 ma / DE 4-20 ma / HART Fieldus (Not FISCO) All Ui = 30V Ii = 100mA Ui = 30V Ii = 100mA Ui = 24V Ii = 250mA Li = 0 T5 Ta = 50 to 93ºC T6 Ta = 50 to 78ºC T4 Ta = 50 to 93ºC T5 Ta = 50 to 85ºC T6 Ta = 50 to 70ºC T4 Ta = 50 to 93ºC T5 Ta = 50 to 63ºC T6 Ta = 50 to 48ºC T3 Ta = 50 to 93ºC T4 Ta = 50 to 40ºC Type of Protection Comm. Option Field Parameters Temp. Codes SAEx (South Africa) Flameproof, Zone 1: Ex d IIC, Intrinsically Safe, Zone 0/1: Ex ia IIC, Multiple Marking: Flameproof, Zone 1: Ex d IIC, Intrinsically Safe, Zone 0/1: Ex ia IIC, NOTE: The user must determine the type of protection required for installation of the equipment. The user shall then check the ox [ ] adjacent to the type of protection used on the equipment certification nameplate. Once a type of protection has een checked on the nameplate, susequently the equipment shall not e reinstalled using any of the other certification types. Li = 0 except Li = 150µH when Option ME, Analog Meter, is selected All 4-20 ma / DE 4-20 ma / HART Fieldus (Not FISCO) 4-20 ma / DE 4-20 ma / HART Fieldus (Not FISCO) All Ui = 30V Ii = 100mA Ui = 30V Ii = 100mA Ui = 24V Ii = 250mA Li = 0 Ui = 30V Ii = 100mA Ui = 30V Ii = 100mA Ui = 24V Ii = 250mA Li = 0 T5 Ta = 50 to 93ºC T6 Ta = 50 to 78ºC T4 Ta = 50 to 93ºC T5 Ta = 50 to 85ºC T6 Ta = 50 to 70ºC T4 Ta = 50 to 93ºC T5 Ta = 50 to 63ºC T6 Ta = 50 to 48ºC T3 Ta = 50 to 93ºC T4 Ta = 50 to 40ºC T4 Ta = 50 to 93ºC T5 Ta = 50 to 85ºC T6 Ta = 50 to 70ºC T4 Ta = 50 to 93ºC T5 Ta = 50 to 63ºC T6 Ta = 50 to 48ºC T3 Ta = 50 to 93ºC T4 Ta = 50 to 40ºC

14 ST 3000 Smart Pressure Transmitter 14 ATEX (LCIE) Type of Protection Comm. Option Field Parameters Flameproof, Zone 0:, Ex td All All Flameproof, Zone 1:, Ex d IIC, Ex td All All Intrinsically Safe, Zone 0/1:, Ex ia IIC, Non-Sparking, Zone 2:,Ex na IIC (Honeywell), Multiple Marking: Flameproof, Zone 1:, Ex d IIC Intrinsically Safe, Zone 0/1:, Ex ia IIC Non-Sparking, Zone 2:, Ex na IIC 4-20 ma / DE 4-20 ma / HART Fieldus (Not FISCO) 4-20 ma / DE 4-20 ma / HART Fieldus (Not FNICO) 4-20 ma / DE 4-20 ma / HART Ui = 30V Ii = 100mA Ui = 30V Ii = 100mA Ui = 24V Ii = 250mA Li = 0 Ui = 30V Ii = 100mA Ui = 30V Ii = 100mA Ui = 24V Ii = 250mA Li = 0 Ui = 30V Ii = 100mA Ui = 30V Ii = 100mA Temp. Codes A20 IP6X T95ºC Ta = 93ºC or T80ºC Ta = 78ºC T5 Ta = 50 to +93ºC T6 Ta = 50 to +78ºC, A21 IP6X T95ºC Ta = 93ºC or T80ºC Ta = 78ºC T4 Ta = 50 to 93ºC T5 Ta = 50 to 85ºC T6 Ta = 50 to 70ºC T4 Ta = 50 to 93ºC T5 Ta = 50 to 63ºC T6 Ta = 50 to 48ºC T3 Ta = 50 to 93ºC T4 Ta = 50 to 40ºC T4 Ta = 50 to 93ºC T5 Ta = 50 to 85ºC T6 Ta = 50 to 70ºC T4 Ta = 50 to 93ºC T5 Ta = 50 to 63ºC T6 Ta = 50 to 48ºC T3 Ta = 50 to 93ºC T4 Ta = 50 to 40ºC T4 Ta = 50 to 93ºC T5 Ta = 50 to 85ºC T6 Ta = 50 to 70ºC T4 Ta = 50 to 93ºC T5 Ta = 50 to 63ºC T6 Ta = 50 to 48ºC NOTE: The user must determine the type of protection required for installation of the equipment. The user shall then check the ox [ ] adjacent to the type of protection used on the equipment certification nameplate. Once a type of protection has een checked on the nameplate, susequently the equipment shall not e reinstalled using any of the other certification types. Fieldus (Not FISCO/FNICO) Ui = 24V Ii = 250mA Li = 0 T3 Ta = 50 to 93ºC T4 Ta = 50 to 40ºC * Li = 0 except Li = 150µH when Option ME, Analog Meter, is selected.

15 ST 3000 Smart Pressure Transmitter 15 INMETRO (CERTUSP) Brazil Type of Protection Comm. Option Field Parameters Temp. Codes Flameproof, Zone 1: BR-Ex d IIC Intrinsically Safe, Zone 0/1: BR-Ex ia IIC Li = 0 except Li = 150µH when Option ME, Analog Meter, is selected. All 4-20 ma / DE 4-20 ma / HART Fieldus (Not FISCO) All Ui = 30V Ii = 100mA Ui = 30V Ii = 100mA Ui = 24V Ii = 250mA Li = 0 T5 Ta = 50 to 93ºC T6 Ta = 50 to 78ºC T4 Ta = 50 to 93ºC T5 Ta = 50 to 85ºC T6 Ta = 50 to 70ºC T4 Ta = 50 to 93ºC T5 Ta = 50 to 63ºC T6 Ta = 50 to 48ºC T3 Ta = 50 to 93ºC T4 Ta = 50 to 40ºC ST 3000 Pressure Transmitter Marine Certificate (MT Option) This certificate defines the certifications covered for the ST 3000 Pressure Transmitter family of products, including the SMV 3000 Smart Multivariale Transmitter. It represents the compilation of the five certificates Honeywell currently has covering the certification of these products into marine applications. For ST 3000 Smart Pressure Transmitter and SMV 3000 Smart Multivarile Transmitter American Bureau of Shipping (ABS) Steel Vessel Rules 1-1-4/3.7, 4-6-2/5.15, 4-8-3/13 & 13.5, 4-8-4/27.5.1, 4-9-7/13. Certificate numer: 04-HS PDA Bureau Veritas (BV) - Product Code: 389:1H. Certificate numer: 12660/B0 BV Det Norske Veritas (DNV) - Location Classes: Temperature D, Humidity B, Viration A, EMC B, Enclosure C. For salt spray exposure; enclosure of 316 SST or 2-part epoxy protection with 316 SST olts to e applied. Certificate numer: A Korean Register of Shipping (KR) - Certificate numer: LOX17743-AE001 Lloyd's Register (LR) - Certificate numer: 02/60001(E1) & (E2)

16 ST 3000 Smart Pressure Transmitter 16 The ST 3000 Smart Pressure Transmitters are in conformity with the essential requirements of the Pressure Equipment Directive. European Pressure Equipment Directive (PED) (97/23/EC) Honeywell ST 3000 Smart Pressure Transmitters are designed and manufactured in accordance with the applicale portions of Annex I, Essential Safety Requirements, and sound engineering practices. These transmitters have no pressurized internal volume, or have a pressurized internal volume rated less than 200 ar (2,900 psig), and/or have a maximum volume of less than 0.1 liter (Article 3, 1.1.(a) first indent, Group 1 fluids). Therefore, these transmitters are not suject to the essential requirements of the directive 97/23/EC (PED, Annex I) and shall not have the CE mark applied. For transmitters rated > 200 ar (2,900 psig) < 1,000 ar (14,500 psig) Honeywell maintains a technical file in accordance with Annex, Module A, (internal production control) when the CE mark is required. Transmitter Attachments: Diaphragm Seals, Process Flanges and Manifolds comply with Sound Engineering Practice. NOTE: Pressure transmitters that are part of safety equipment for the protection of piping (systems) or vessel(s) from exceeding allowale pressure limits, (equipment with safety functions in accordance with Pressure Equipment Directive 97/23/EC article 1, 2.1.3), require separate examination. A formal statement from TÜV Industry Service Group of TÜV America, Inc., a division of TÜV Süddeutschland, a Notified Body regarding the Pressure Equipment Directive, can e found at A hard copy may e otained y contacting a Honeywell representative. CE Mark Dual Seal Certification Measuring Instruments Directive (MID) Recommended Frequency of Caliration Approved Manufacturing Locations Electro Magnetic Compatiility (EMC) (2004/108/EC) All Models: EN : 1992; EN :1995; EN : A1, A2, and A3 Industrial Locations Dual Seal Certification ased on ANSI/NFPA and ANSI/ISA requirements without the use of additional seal protection elements. Measuring Instruments Directive (MID) (2004/22/EC) Applies only to STA97L (0-100 BAR) and STA94L ( BAR) Temperature Range: Class 3 from -25 C to + 55 C Honeywell recommends verifying the caliration of these devices once every four years. Honeywell Process Solutions - York, PA USA Honeywell (Tianjin) Limited Tianjin, P.R. China Honeywell Automation India Ltd. Pune India Foundation TM Fieldus is a trademark of the Fieldus Foundation. Viton is a registered trademark of DuPont HART is a registered trademark of HART Communications Foundation. Teflon is a registered trademark of DuPont. Hastelloy C-276 is a registered trademark of Haynes International. DC 200 and DC 704 are registered trademarks of Dow Corning. Monel 400 is a registered trademark of Special Metals Corporation. FM Approvals SM is a service mark of FM Gloal ST 3000 and Experion are registered trademarks of Honeywell International Inc.

17 ST 3000 Smart Pressure Transmitter 17 Mounting Figure 4 Examples of typical mounting positions for STA922 and STA Figure 4a Examples of typical mounting positions for in-line models STA92L, STA94L and STA97L

18 ST 3000 Smart Pressure Transmitter 18 Reference Dimensions millimeters inches Plug With Smart meter Removal Clearance for All Caps Without meter Without meter 1/2" NPT Optional Meters Optional external ground Rotational Lock /2" NPT Pressure Connection Mounting Holes M8 x 1.25 (2) SQ Figure 5 Typical mounting dimensions for reference STA922 and STA940

19 ST 3000 Smart Pressure Transmitter 19 Reference Dimensions millimeters inches With Smart meter With Analog meter Removal Clearance for All Caps Without meter Without meter Plug /2" NPT Optional meters / 238.3* 8.40 / 9.38 Optional external ground 158 / 183* 6.22 / 7.20 Rotational lock Other Connectors or /2" NPT Pressure Connection 9/16 Aminco Pressure Connection ½ NPT male DIN19213 *Dimensions vary due to slight differences in electronics housing designs Bottom view of DIN Figure 5a - Typical mounting dimensions for in-line models STA92L, STA94L and STA97L

20 ST 3000 Smart Pressure Transmitter 20 Options NAMUR NE43 Compliance (Option NE) Mounting Bracket (Options MB, MX, SB, SX and FB) The angle mounting racket is availale in either zincplated caron steel or stainless steel and is suitale for horizontal or vertical mounting on a two inch (50 This option provides software the meets the NAMUR NE43 requirements for failsafe software. Transmitter failure information is generated when the measuring information is no longer valid. millimeter) pipe, as well as wall mounting. An optional Transmitter failure values are: 3.6 ma and 21.0 flat mounting racket is also availale in caron steel ma. The normal ST 3000 ranges are 3.8 ma and for two inch (50 millimeter) pipe mounting ma. Indicating Meter (Options ME and SM) Indicator Configuration (Option CI) Two integral meter options are availale. An analog Provides custom configuration of Smart Meters. meter (option ME) is availale with a 0 to 100% linear scale. The Smart Meter (option SM) provides an LCD display for oth analog and digital output and can e configured to display pressure in pre-selected engineering units. Tagging (Option TG) Up to 30 characters can e added on the stainless steel nameplate mounted on the transmitter s electronics housing at no extra cost. Note that a separate nameplate on the meter ody contains the HART Protocol Compatiility (Options HC and H6) serial numer and ody-related data. A stainless steel Optional electronics modules for the ST 3000 provide wired on tag with additional data of up to 4 lines of 28 HART Protocol compatiility in either HART 5.x or 6.x characters is also availale. The numer of characters formats. Transmitters with a HART Option are for tagging includes spaces. compatile with any HART enaled system that provides 5.x or 6.x format support. Transmitter Configuration (Options TC and FC) The factory can configure the transmitter linear/square Foundation TM Fieldus (Option FF) root extraction, damping time, LRV, URV and mode Equips transmitter with FF protocol for use in (analog/digital) and enter an ID tag of up to eight kit/s FF networks. See document 34-ST for characters and scratchpad information as specified. additional information on ST 3000 Fieldus transmitters. Custom Caliration and ID in Memory (Option CC) The factory can calirate any range within the scope of SIL2/SIL3 Certification (Option SL) the transmitter s range and enter an ID tag of up to This ST 3000 product is availale for use with safety eight characters in the transmitter s memory. systems. With the SL option, we are fully certified to SIL 2 capaility for single transmitters and SIL 3 capaility for multiple transmitter use through TÜV Nord Sys Tec GmH & Co. KG. We are in compliance with the following SIL standards: IEC : 1998 IEC : 2000 IEC : 1998 Lightning Protection (Option LP) A terminal lock with circuitry that protects the transmitter from transient surges induced y neary lightning strikes is availale.

21 ST 3000 Smart Pressure Transmitter 2 Model Guides are suject to change and are inserted into the specifications as guidance only. Prior to specifying or ordering a model check for the latest revision Model Guides which are pulished at: Model Guide (34-ST-16-26) ST 3000 Smart Transmitter Dual Head Gage Pressure (GP) and Single Head Asolute Pressure (AP) Series ST-16U-26 Issue 56 Page 1 of 5 Model Guide Instructions Select the desired Key Numer. The arrow to the right marks the selection availale. Make one selection from each Tale (I, II and IV), using the column elow the proper arrow. Select as many Tale options as desired plus a required communication option selection. A ( ) denotes unrestricted availaility. A letter denotes restricted availaility. Restrictions follow Tale IV. Key Numer I II (Optional) - _ ,, + IV X X X X KEY NUMBER Span Gage 0-5 to psi / to 0-35 ar Pressure 0-30 to 0-3,000 psi / to ar Asolute 0-50 to mmhga / 0-67 to 0-1,040 mara Pressure 0-5 to psia / to 0-35 ara STG944 STG974 STA922 STA940 Avail. Important Note: Base STA and STG models no longer include a default communications option. All units now require the selection of a communication option from Tale (AN, DE, HC, H6 or FF). TABLE I - METER BODY Wetted Process Vent/Drain Valves Head 13 2 Barrier Diaphragms Caron Steel SS 316L SS Caron Steel SS Hastelloy C Caron Steel SS Monel Caron Steel SS Tantalum 316 SS SS 316L SS Materials of 316 SS SS Hastelloy C Construction 316 SS SS Monel SS SS Tantalum Hastelloy C-276 3, 6 Hastelloy C Hastelloy C Hastelloy C-276 3, 6 Hastelloy C Tantalum Monel 400 4, 7 Monel Monel Silicone DC Fill Fluid CTFE CTFE (MO) 1/4 NPT Process Head 1/2 NPT with Adapter Configuration 1/2 NPT A B C 19 D E F G 19 H J K L 19 _ 1 _ _ 2 3 _ A G t G TABLE II No Caron Steel heads are zinc-plated and not recommended for water service due to hydrogen migration. For that service, use 316 stainless steel Wetted Process Heads. 2 Vent/Drains are sealed with Teflon or PTFE 3 Hastelloy C-276 or UNS N Monel 400 or UNS N Supplied as 316 SS or as Grade CF8M, the casting equivalent of 316 SS. 6 Supplied as indicated or as Grade CW12MW, the casting equivalent of Hastelloy C Supplied as indicated or as Grade M30C, the casting equivalent of Monel Monel 400 or UNS N04400 or UNS N The standard reference head for the STG9XX is caron steel (zinc-plated). See Tale for a stainless steel reference (HR) head option. 14 Use DC 704 option when the STA922 will e operating elow 50mm HgA, see Fig. 2 in Specification 34-ST Note: End vent drain valve standard for STG9XX. End vent drain valves are not availale on STA9XX.

22 ST 3000 Smart Pressure Transmitter 2 34-ST-16U-26 Issue 56 Availaility Page 2 of 5 STG944 STA922 STG974 STA940 TABLE - OPTIONS Communication Options (Must choose a communications option) Analog only (can e configured using appropriate Honeywell DE tool) DE Protocol communications HART 5.x Protocol Compatile Electronics HART 6.x Protocol Compatile Electronics FOUNDATION TM Fieldus Communications Indicating Meter Options Analog Meter (0-100 Even 0-10 Square Root) Smart Meter Custom Configuration of Smart Meter Local Zero Local Zero and Span Transmitter Housing & Electronics Options No housing conduit plugs or adaptors come standard with the ST For certain approval codes, you must select a certified conduit plug from elow and it will come packaged in the ox with your transmitter. 316 SS 5 Electronics Housing - (with M20 Conduit Connections) 316 SS 5 Electronics Housing - (with M20 to 1/2 NPT 316 SS conduit adapter for use with FM and CSA Approval codes) 1/2 NPT Male to M20 Female 316 SS Certified Conduit Adapter (ATEX, CSA & IECEx) 1/2 NPT Male to 3/4 NPT Female 316 SS Certified Conduit Adapter (ATEX, CSA & IECEx) M20 Male to 1/2 NPT Female 316 SS Certified Conduit Adaptor (ATEX, CSA & IECEx) 1/2 NPT Zinc-plated Certified Conduit Plug (ATEX, CSA & IECEx) 1/2 NPT 316 SS Certified Conduit Plug (ATEX, CSA & IECEx) M SS Certified Conduit Plug (ATEX, CSA & IECEx) 1/2 NPT Non-certified Conduit plug (Zinc-plated caron steel, general use) NAMUR Failsafe Software SIL 2 - TÜV Certified transmitter (requires HC/H6 and WP options) Lightning Protection Custom Caliration and I.D. in Memory Transmitter Configuration - (non-fieldus) Transmitter Configuration - (Fieldus) Write Protection (Delivered in the "enaled" position) Write Protection (Delivered in the "disaled" position) Stainless Steel Customer Wired-On Tag (4 lines, 26 characters per line, customer supplied information) Stainless Steel Customer Wired-On Tag (lank) Low Temperature (-50 o C Amient Limit) Meter Body Options (Seal olt material depends on Transmitter olt material) A286 SS (NACE) Bolts and 304 SS (NACE) Nuts for Process Heads 316 SS Bolts and 316 SS Nuts for Process Heads B7M Bolts and Nuts for Process Heads 316 SS 5 Adapter Flange - 1/2 NPT with CS Bolts 316 SS 5 Adapter Flange - 1/2 NPT with 316 SS Bolts 316 SS 5 Adapter Flange - 1/2 NPT with NACE A286 SS Bolts 316 SS 5 Adapter Flange - 1/2 NPT with B7M Bolts Hastelloy C-276 3, 6 Adapter Flange - 1/2 NPT with CS Bolts Hastelloy C-276 3, 6 Adapter Flange - 1/2 NPT with 316 SS Bolts Monel 400 4, 7 Adapter Flange - 1/2 NPT with CS Bolts Monel 400 4, 7 Adapter Flange - 1/2 NPT with 316 SS Bolts 316 SS 5 Blind Adapter Flange with CS Bolts 316 SS 5 Blind Adapter Flange with 316 SS Bolts 316 SS 5 Blind Adapter Flange with NACE A286 SS Bolts 316 SS 5 Blind Adapter Flange with B7M Bolts 316 SS Center Vent Drain and Bushing Side Vent/Drain (End Vent Drain is standard) Viton 8 Process Head Gaskets Graphite Process Head Gasket Viton 8 Adapter Flange Gaskets 316 SS Reference Head (Caron Steel Standard) Modified DIN Process Heads (316 SS) 3 Hastelloy C-276 or UNS N Monel 400 or UNS N Supplied as 316 SS or as Grade CF8M, the casting equivalent of 316 SS. 6 Supplied as indicated or as Grade CW12MW, the casting equivalent of Hastelloy C Supplied as indicated or as Grade M30C, the casting equivalent of Monel Viton or Fluorocaron Elastomer AN DE HC H6 FF ME SM CI LZ ZS SH A3 A1 A2 A4 A5 A6 A7 A8 NE SL LP CC TC FC WP WX TG TB LT r r r m m m x s n n n i i i n n n p p p z CR SS B7 S2 S3 S4 S5 T2 T3 V2 V3 B3 B4 B5 B6 CV SV c c c c c c c c VT GF VF HR 17 DN v v Tale continued next page

23 ST 3000 Smart Pressure Transmitter 2 34-ST-16U-26 Issue 56 Page 3 of 5 TABLE - OPTIONS (continued) Transmitter Mounting Bracket Options Angle Mounting Bracket - Caron Steel Marine Approved Angle Mounting Bracket - Caron Steel Angle Mounting Bracket SS Marine Approved Angle Mounting Bracket SS Flat Mounting Bracket (pipe mounting) - Caron Steel Diaphragm Options Gold plated diaphragm(s) on 316 SS Gold plated diaphragm(s) on Monel or Hastelloy C ONLY Services/Certificates/Marine Type Approval Options User's Manual Paper Copy (Standard, HC, H6 or FF ships accordingly) Clean Transmitter for Oxygen or Chlorine Service (with Certificate) ( ) Over-Pressure Leak Test (with Certificate) (F3392 ) Caliration Test Report and Certificate of Conformance (F3399) Certificate of Conformance (F3391) Certificate of Origin (F0195) SIL Certificate (SIL 2/3) (FC33337) NACE Certificate (Process-Wetted & Non-Process Wetted) (FC33339) NACE Certificate (Process-Wetted) (FC33338) Material Traceaility Certification per EN (FC33341) Marine Type Approvals (DNV, ABS, BV, KR & LR) (FC33340) Warranty Options Additional Warranty - 1 year Additional Warranty - 2 years Additional Warranty - 3 years Additional Warranty - 4 years 3 Hastelloy C-276 or UNS N Monel 400 or UNS N04400 STG944 STA922 STG974 STA940 MB MX SB SX FB G1 G2 UM 0X TP F1 F3 F5 FE F7 FG FX MT W1 W2 W3 W4 h h h o o o Approval Approval Type Body No hazardous location approvals Explosion Proof FM Dust-Ignitionproof Approvals SM Non-Incendive Intrinsically Safe Canadian Explosion Proof Standards Dust-Ignitionproof Association (CSA) Intrinsically Safe Flameproof, Zone 1 IECEx Intrinsically Safe, Zone 0/1 Intrinsically Safe, Zone 0/1 SAEx Flameproof, Zone 1 (South Africa) Multiple Marking 11 CERTUSP INMETRO (Brazil) Int. Safe, Zone 0/1, or Flameproof, Zone 1 Flameproof, Zone 1 Intrinsically Safe, Zone 0/1 Location or Classification Class I, Div. 1, Groups A,B,C,D Class II, Div. 1, Groups E,F,G Class I, Div. 2, Groups A,B,C,D Class I, II,, Div. 1, Groups A,B,C,D,E,F,G Class I, Div. 1, Groups B,C,D Class II,, Div. 1, Groups E,F,G Class I, II,, Div. 1, Groups A,B,C,D,E,F,G Ex d IIC; T5 (Ta = -40 to +93ºC), T6 (Ta = -40 to +78ºC) Ex ia IIC; T3, T4, T5, T6 (See Spec for detailed temperature codes y Communications option) Ex ia IIC T4, T5, T6 9X 1C 2J CA Z2 f EX d IIC T5, T6 ZD Ex ia IIC T4, T5, T6 Ex d IIC T5, T6 ZA BR- Ex d IIC T5, T6 6D BR- Ex ia IIC; T4, T5, T6 (See CERTUSP certificate for detailed temperature 6S codes y Communications option) Approvals continued on next page The user must determine the type of protection required for installation of the equipment. The user shall then check the ox [ ] adjacent to the type of protection used on the equipment certification nameplate. Once a type of protection has een checked on the nameplate, susequently the equipment shall not e reinstalled using any of the other certification types.

24 ST 3000 Smart Pressure Transmitter 2 34-ST-16U-26 Issue 56 Page 4 of 5 Approval Body Tale (con't) Approval Approval Type Body Intrinsically Safe Zone 0 Intrinsically Safe, Zone 1 Dust-tight Enclosure, Zone 0 Flameproof and Dust-tight Enclosure, Zone 1 Location or Classification Ex ia IIC T4 (Ta = 50 C to +93 C); T5 (Ta = 50 C to +85 C); T6 (Ta = 50 C to +70 C) Ex ia IIC T4 (Ta = 50 C to +93 C); T5 (Ta = 50 C to +85 C); T6 (Ta = 50 C to +70 C) Ex td A20 IP6X T95 C (at Ta = 93 C) or T80 C (at Ta = 78 C) Ex d IIC T5 (Ta = 40 C to +93 C), T6 (Ta = 40 C to +78 C) Supply 11-42Vdc Ex td A21 IP6X T95 C (at Ta = 93 C) or T80 C (at Ta = 78 C) STG944 STA922 STG974 STA940 3S ATEX 10 (LCIE) Non-Sparking, Zone 2 Ex na, IIC T5 (Ta = 40 C to +93 C), T6 (Ta = 40 C to +78 C); Zone 2 Supply < 42Vdc, 23mA Ex td A22 IP6X T95 C (at Ta = 93 C) or T80 C (at Ta = 78 C) (Honeywell). 3N Multiple Marking 11 Ex ia IIC T4 (Ta = 50 C to +93 C); T5 (Ta = 50 C to +85 C); T6 (Ta = 50 C to +70 C); Ui = 30V; Ii = 100mA Ex td A20 IP6X T95 C (at Ta = 93 C) or T80 C (at Ta = 78 C) Int. Safe, Zone 0/1 and Dust-tight Enclosure, or Flameproof, Zone 1 and Dust-tight Enclosure, Ex d IIC T5 (Ta = 40 C to +93 C), T6 (Ta = 40 C to +78 C) Supply 11-42Vdc Ex td A21 IP6X T95 C (at Ta = 93 C) or T80 C (at Ta = 78 C) 3C or Non-Sparking, Zone 2 Ex na, IIC T5 (Ta = 40 C to +93 C), T6 (Ta = 40 C to +78 C); Zone 2 Supply < 42Vdc, 23mA Ex td A22 IP6X T95 C (at Ta = 93 C) or T80 C (at Ta = 78 C) (Honeywell) 10 See ATEX installation requirements in the ST 3000 User's Manual 11 The user must determine the type of protection required for installation of the equipment. The user shall then check the ox [ ] adjacent to the type of protection used on the equipment certification nameplate. Once a type of protection has een checked on the nameplate, susequently the equipment shall not e reinstalled using any of the other certification types. TABLE IV Factory Identification X X X X

25 ST 3000 Smart Pressure Transmitter 2 34-ST-16U-26 Issue 56 Page 5 of 5 RESTRICTIONS Restriction Availale Only With Not Availale With Letter Tale Tale c I Select only one option from this group G This approval code requires the f selection of a certified conduit plug: A5, A6 or A7 Key # I STG974 L h I _ 2 _ i 1C or 2J m SM n 1C, 2J o CR, S4, B5 p HC or H6 and WP FF, 00 r I TC, ME, or FISCO/FNICO compliance FISCO/FNICO compliance availale only not availale 3C, 3N, 33, 3S, 2J, CA, with 1C Z2, ZD, ZA, 6D & 6S s FF, ME t Select from Tale S2, S3, S4, S5, T2, T3, V2, V3 v I E _ G, F _ G x FF, SM z Key # STG974 2 MX, SX FB, MB, SB 15 FF 17 VT 19 F7, FG 21 FF 22 SL This approval code requires the 24 selection of a certified conduit plug: A5, A6 or A7 Ordering Example: STG944-A1A HC,LP,2J+XXXX FOUNDATION TM Fieldus is a trademark of Fieldus Foundation. Viton is a registered trademark of DuPont Performance Elastomers. Teflon is a registered trademark of DuPont. FM Approvals SM is a service mark of FM Gloal DC 200 and DC 704 are registered trademarks of Dow Corning

26 ST 3000 Smart Pressure Transmitter 2 Model Guides are suject to change and are inserted into the specifications as guidance only. Prior to specifying or ordering a model check for the latest revision Model Guides which are pulished at: Model Guide (34-ST-16-28) 34-ST-16U-28 Issue 49 Page 1 of 5 ST 3000 Smart Transmitter In-Line Gage & Asolute Pressure Series 900 Model Guide Instructions Select the desired Key Numer. The arrow to the right marks the selection availale. Make one selection from each Tale (I, II and IV), using the column elow the proper arrow. Select as many Tale options as desired plus a communications option selection. A ( ) denotes unrestricted availaility. A letter denotes restricted availaility. Restrictions follow Tale IV. Key Numer I II (Optional) - _ ,, + IV X X X X KEY NUMBER Gage Pressure Asolute Pressure Span 0-5 to psig / to 0-35 ar 0-30 to 0-3,000 psig / to ar 0-60 to 0-6,000 psig / to ar to 0-10,000 psig / 0-7 to ar 0-50 to mmhg / 0-67 to 0-1,040 mara 0-5 to psia / to 0-35 ara 0-30 to 0-3,000 psia / to ara STG94L STG97L STG98L STG99L STA92L STA94L STA97L Avail. Important Note: Base STA and STG models no longer include a default communications option. All units now require the selection of a communication option from Tale (AN, DE, HC, H6 or FF). TABLE I - METER BODY Wetted Process He ads Vent/Drain Valves 1 Barrier Diaphragms Materials of 316 SS L SS E Construction Fill Fluid 316 SS -- Hastelloy C F DC 200 Silicone _ 1 _ CTFE _ 2 _ 9/16" - 18 Aminco A Process Connection 1/2 NPT (female) G Configuration 1/2 NPT (male) H DIN D TABLE II No Vent/Drains are sealed w ith Teflon or PTFE 2 Hastelloy C-276 or UNS N10276 Ordering Example: STG94L-E1A AN,9X+XXXX

27 ST 3000 Smart Pressure Transmitter 2 34-ST-16U-28 Issue 49 Page 2 of 5 Availaility STG9 _ L STG99 L STA9 _ L TABLE - OPTIONS Communication Options (Must choose a communications option) Analog only (can e configured using appropriate Honeywell DE tool) DE Protocol communications HART 5.xProtocol Compatile Electronics HART 6.xProtocol Compatile Electronics FOUNDATION TM Fieldus Communications Indicating Meter Options Analog Meter (0-100 Even 0-10 Square Root) Smart Meter Custom Configuration of Smart Meter Local Zero Local Zero and Span Transmitter Housing & Electronics Options No housing conduit plugs or adaptors come standard with the ST For certain approval codes, you must select a certified conduit plug from elow and it will come packaged in the ox with your transmitter. 316 SS 3 Electronics Housing - (with M20 Conduit Connections) SH 316 SS 3 Electronics Housing - (with M20 to 1/2 NPT 316 SS conduit adapter for use with FM and CSA Approval codes) A3 1/2 NPT Male to M20 Female 316 SS Certified Conduit Adapter (ATEX, CSA & IECEx) 1/2 NPT Male to 3/4 NPT Female 316 SS Certified Conduit Adapter (ATEX, CSA & M20 Male to 1/2 NPT Female 316 SS Certified Conduit Adaptor (ATEX, CSA & IECEx) 1/2 NPT Zinc-plated Certified Conduit Plug (ATEX, CSA & IECEx) A1 A2 A4 A5 1/2 NPT 316 SS Certified Conduit Plug (ATEX, CSA & IECEx) M SS Certified Conduit Plug (ATEX, CSA & IECEx) 1/2 NPT Non-certified Conduit plug (Zinc-plated caron steel, general use) NAMUR Failsafe Software SIL 2 - TÜV Certified transmitter (requires HC or H6 and WP options) A6 A7 A8 NE SL Lightning Protection LP Custom Caliration and I.D. in Memory Transmitter Configuration - (non-fieldus) Transmitter Configuration - (Fieldus) Write Protection (Delivered in the "enaled" position) Write Protection (Delivered in the "disaled" position) Stainless Steel Customer Wired-On Tag (4 lines, 26 characters per line, customer supplied information) Stainless Steel Customer Wired-On Tag (lank) Low Temperature (-50 o C Amient Limit) CC TC FC WP WX TG TB LT Transmitter Mounting Bracket Options Angle Mounting Bracket - Caron Steel Marine Approved Angle Mounting Bracket - Caron Steel Angle Mounting Bracket SS Marine Approved Angle Mounting Bracket SS Flat Mounting Bracket - Caron Steel MB MX SB SX FB Services/Certificates/Marine Type Approval Options User's Manual Paper Copy (Standard, HC, H6, or FF ships accordingly) Clean Transmitter for Oxygen or Chlorine Service with Certificate ( ) Over-Pressure Leak Test with Certificate (F3392) Caliration Test Report and Certificate of Conformance (F3399) Certificate of Conformance (F3391) Certificate of Origin (F0195) UM 0X TP F1 F3 F5 SIL Certificate (SIL 2/3) (FC33337) FE NACE Certificate (Process-Wetted & Non-Process Wetted) (FC33339) F7 NACE Certificate (Process-Wetted only) (FC33338) FG Material Traceaility Certification per EN (FC33341) Marine Type Approvals (DNV, ABS, BV, KR & LR) (FC33340) FX MT Warranty Options Additional Warranty - 1 year W1 Additional Warranty - 2 years W2 Additional Warranty - 3 years W3 Additional Warranty - 4 years W4 3 Supplied as 316 SS or as Grade CF8M, the casting equivalent of 316 SS. AN DE HC H6 FF ME SM CI LZ ZS r r m m x x s s n i n i p p h h Tale continued next page