High-Voltage, Non-Isolated Buck-Boost Converter for ISDN Digital Phones

Size: px
Start display at page:

Download "High-Voltage, Non-Isolated Buck-Boost Converter for ISDN Digital Phones"

Transcription

1 End of Life. Last Available Purchase Date is -Dec-20 Si92 High-Voltage, Non-Isolated Buck-Boost Converter for ISDN Digital Phones FEATURES Fixed -V or.-v Output Integrated Floating Feedback Amplifier On-Chip 70-V,.- N-Channel MOSFET Switch Integrated High Voltage Start-Up Circuit, with Regulator 0-V to 0-V Input Voltage Range 9-kHz PWM Operation Integrated Soft-Start and Oscillator High Efficiency Over Full Load Range Under Voltage Lockout Current Mode Control Hiccup Mode Short Circuit Protection Thermal Shutdown SOIC-8 Narrow-Body Package DESCRIPTION The Si92 simplifies the 8-V to -V or.-v converter design for ISDN application by integrating the floating feedback error amplifier providing direct output voltage regulation. This approach eliminates the need for an external shunt regulator. The Si92 also integrates a high voltage depletion mode MOSFET which allows the converter to be powered directly from the high input bus voltage without requiring an external start-up circuit. Combined with simple magnetic design due to its non-isolated topology, the Si92 provides a one-chip solution for complete ISDN power supply. In order to reduce external component count, the Si92 has a fully integrated 9-kHz oscillator and soft-start circuit. The Si92 is available in both standard and lead (Pb)-free SOIC-8 pin packages, and is offered in either -V or.-v fixed output options (Si92DY- or Si92DY-, respectively). In order to satisfy the stringent ambient temperature requirements in many applications, the Si92 is rated to the industrial temperature range of 0 C to 8 C. FUNCTIONAL BLOCK DIAGRAM Regulator Reference Generator BYPASS Control L X V/00 ma or. V/00 ma COMP C S 8 V

2 ABSOLUTE MAXIMUM RATINGS (ALL VOLTAGES REFERENCED TO = 0 V) V V CS V to 0. V V I LX (peak current ) A V Bypass, CS V to 0. V (V LX V CS ) internal power MOSFET V Storage Temperature to 0 C Operating Junction Temperature C Power Dissipation (Package) a 8-Pin SOIC (Y Suffix) b W Thermal Impedance ( JA ) a 8-Pin SOIC C/W Notes a. Device mounted with all leads soldered or welded to PC board. b. Derate 0 mw/ C above 2 C. Stresses beyond those listed under Absolute Maximum Ratings may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to absolute maximum rating conditions for extended periods may affect device reliability. RECOMMENDED OPERATING RANGE (ALL VOLTAGES REFERENCED TO = 0 V) V to 0 V (internally regulated) V (externally supplied) V to 2.0 V Digital Inputs V to RECOMMENDED EXTERNAL COMPONENTS ( SEE TYPICAL APPLICATIONS CIRCUIT ) L = 8 H, C OUT = 220 F //, CIN = F, C BYPASS =, C VCC = F, R SENSE = 0.2, 0. W SPECIFICATIONS a (All Voltages Are With Respect To Unless Otherwise Specified) Parameter Symbol Output Voltage (with respect to = 0 V) -V Converter.-V Converter Line Regulation (with respect to = 0 V) Test Conditions (Internally Regulated) Unless Otherwise Specified Limits 0 to 8 C = 0 to 0 V Temp b Min c Typ d Max c Unit 0 ma <I LOAD < 20 ma Full Full.7.0. Line Regulation 0 V 0 V Full % (Internal Regulator) Bias Voltage Full V UVLO Under Voltage Lockout Turn-On Full Hysteresis V Room 0. Soft-Start Error Amplifier Start-Up Current I SS = 0 V Room 0 A Oscillator Switching Frequency f OSC Room khz Error Amplifier Transconductance gm Room 0 20 umho Clamp Voltage V CL Internal Error Amplifier Output Clamp Voltage Current Limit Room. V Threshold Voltage V CS Full V MOSFET Switch N-Channel MOSFET r DS(on) Room. 2. V V 2

3 SPECIFICATIONS a (All Voltages Are With Respect To Unless Otherwise Specified) Supply Parameter Supply Current (Internally Regulater) Supply Current (External Applied) Symbol Test Conditions (Internally Regulated) Unless Otherwise Specified Limits 0 to 8 C = 0 to 0 V Temp b Min c Typ d Max c Unit I to Full.2. I CC to 0 V; >20 V Full. 2.0 ma supply Current I OUT to Full Start-Up Current I START = 0 V Full 0 Thermal Shutdown Thermal Shutdown Temperature T OTP 70 Thermal Hysteresis T HYS 2 Efficiency Efficiency 00-mA Output, = 8 V Notes a. Refer to PROCESS OPTION FLOWCHART for additional information. b. Room = 2 C, Full = as determined by the operating temperature suffix. c. The algebraic convention whereby the most negative value is a minimum and the most positive a maximum. d. Typical values are for DESIGN AID ONLY, not guaranteed nor subject to production testing. V Room 77. V Room 7 C % DETAILED BLOCK DIAGRAM R* 0 A 2 A COMP GM. V H Soft Start 7 R2* V REF.2 V. V Low Side Error Amp 0. V L PWM Hiccup Discharge Mode OSC 0% Max. Duty Cycle R Q OTP V IN 8 L X S BYPASS Bias/ Reference Circuit 0.7 V OCL 0.-V Hysteresis CS 2 8. V *R and R2 are internal voltage setting resistors used to set output voltage to fixed. V or V.

4 TYPICAL CHARACTERISTICS (INTERNALLY REGULATED, 2 C UNLESS NOTED). -V vs. Temperature..-V vs. Temperature (V) VOUT (V).00 VOUT Temperature ( C) Temperature ( C) 2. r DS(on) vs. Temperature 0 Frequency vs. Temperature r DS(on) On-Resistance ( ) Frequency (khz) Temperature ( C) Temperature ( C). Supply Current vs. ) Supply Current (I..2 8 C 2 C 0 C (V)

5 TYPICAL CHARACTERISTICS (INTERNALLY REGULATED, 2 C UNLESS NOTED) 90 Output Load vs. Efficiency (Si92DY-) No Winding 90 Output Load vs. Efficiency (Si92DY-) No Winding 80 V IN = 0 V 80 0 V IN Efficiency (%) V IN = 8 V V IN = 0 V Efficiency (%) V IN 0 V IN I OUT (ma) I OUT (ma) Output Load vs. Efficiency (Si92DY-) With Winding = 0 V Output Load vs. Efficiency (Si92DY-) With Winding 0 V IN 8 V IN Efficiency (%) = 8 V = 0 V Efficiency (%) V IN I OUT (ma) I OUT (ma)

6 PIN CONFIGURATION AND ORDERING INFORMATION SOIC-8 ORDERING INFORMATION Part Number Temperature Range Package CS BYPASS COMP 2 Si92 Top View 8 7 L X Si92DY--T Si92DY--T E Si92DY--T Si92DY--T E Si92DY- Si92DY- 0 to 8 C Tape and Reel Bulk Eval Kit Temperature Range Board Type Si92DB- Si92DB- 0 to 70 C Surface Mount and Thru-Hole PIN DESCRIPTION Pin Number Name Function CS Current sense pin to detect the inductor current for current mode control and over current protection 2 Negative supply voltage (0 V to 0 V) BYPASS.-V bandgap reference. Decouple with capacitor. COMP Compensation node to stabilize the converter Output voltage feedback connected to the PWM summing comparator Low impedance system ground Internally generated supply voltage for the internal circuit and MOSFET drive circuit. Decouple with an external 7 bypass capacitor. 8 L X Inductor connection node DETAILED DESCRIPTION Start-Up The UVLO circuit prevents the internal circuits from turning on if VCC is less than 7. V (typical) above the negative supply voltage at pin. With a typical hysteresis of 0. V, the controller is continuously powered on until the voltage drops below 7.0 V. This hysteresis prevents the converter from oscillating during the start-up phase and unintentionally locking up the system. Once ( ) exceeds the UVLO threshold the internal reference, oscillator, and soft-start circuits are enabled. Soft-Start The Si92 has an on-chip soft-start circuit which utilizes the error amplifier external compensation network to ramp the output NMOS transistor current limit which, in turn, allows the output voltage to rise gradually without excessive overshoot. The soft-start circuit is enable once the voltage exceeds the UVLO threshold. For the recommended frequency compensation components (see Typical Application Circuit) the soft-start time is approximately 0 ms. Oscillator The oscillator is designed to operate at a nominal frequency of 9 khz with no external components. The 9-kHz operating frequency allows the converter to operate in PWM mode during the full load condition even though the duty cycle is very low. The 9kHz switching frequency also allows the converter to operate at optimal efficiency without a large output inductor and capacitor. PWM Mode and Current Limit The Si92 is a current-mode converter designed to operate in PWM mode. It features pulse-by-pulse peak current limiting such that when the peak current sensed voltage on the CS pin is greater than 0.7 V the switch is turned off for the remainder of the clock cycle.

7 DETAILED DESCRIPTION Bypass The bypass voltage of the Si92 is set at a particular positive reference relative to the pin. The bypass voltage is used to set an accurate voltage and bias current for the on-chip oscillator and soft-start circuits. The 0.- F ceramic decoupling capacitor is recommended between the bypass and. No other components should be connected to this pin. Error Amplifier With a 8-V bus voltage, the converter is referenced to the 8-V ( ) node as its system ground. However, the -V or.-v output is referenced to the pin, which is normally connected to 0 V. To regulate this output voltage, the Si92 has an on-chip error amplifier which continuously monitors the output voltage and compares it to a reference voltage. This difference signal is level-shifted to the low side circuit to control the power switch duty-cycle and hence the regulation of the output voltage. Frequency compensation for the error amplifier is achieved by connecting an external network between the COMP pin and the pin. Regulator is an internally generated bias supply voltage which should be externally bypassed with a 0.- F capacitor connected to the negative supply voltage,. No load current should be drawn from the pin. may be supplied from an external source of 9.-V to 2-V referenced to. In this configuration, the internal regulator is disabled when the receives 9.-V, or greater, above. Thermal Shutdown The Si92 also includes thermal shutdown which shuts down the device when junction temperature exceeds 70 C due to over heating. In thermal shutdown once the die temperature cools to below C the regulator is enabled. If the die temperature is excessive due to high package power dissipation the regulator s thermal circuit will continue to pulse the regulator on and off. This is called thermal cycling. Hiccup Mode Short Circuit Protection In addition to the thermal shutdown and the cycle-by-cycle current limiting features already described, the Si92 has a built-in hiccup mode timer to handle a continuous output short-circuit and to automatically restart the device when the short-circuit is removed. If an output short-circuit occurs, the device immediately enters a cycle-by-cycle current limiting mode. As long as the thermal shutdown is not activated then the Si92 automatically determines whether the internal hiccup timer should be started by monitoring the COMP pin. If V COMP exceeds an upper threshold voltage (approximately. V) the timer is started and the external network at the COMP pin is discharged by an internal 2- A current sink until V COMP reaches approximately. V. (Note: all voltages are with respect to ). At this point, the circuit reverts to the normal soft-start mode, whereby the COMP network is charged by its internal soft-start 0- A current source and the circuit will attempt to start up in the normal manner. However, if the output short circuit is still present, the converter will again enter the cycle-by-cycle current limiting mode until the COMP pin voltage reaches. V, whereupon this cycle repeats until the short circuit is removed. The duty cycle imposed by the hiccup timer allows the Si92 to handle continuous short-circuit without damage as long as the recommended component values shown in the Typical Application Circuit are used. MOSFET Switch The low-side n-channel MOSFET switch is integrated to provide optimum performance and to minimize the overall converter size. The typical.- r DS(on) of the MOSFET allows the converter to deliver up to 2 W of output power. 7

8 TYPICAL APPLICATION CIRCUIT L 8 H 220 F C2 * C F 80 V C C* C F C 7 2 BYPASS L X COMP CS Si92DY- or Si92DY- 8 0MQ00N R 0.2 / 2 W 80 pf C7 V/00 ma or. V/00 ma R2 7 k (27 k for Si92DY-) C8 0 to 0 V FIGURE. Typical Applications Circuit *Optional Silk Screen T C F 80 V C2* 2 CS BYPASS COMP COIL H Np Ns D2 BAS2 C7 220 F 0 V D 0MQ00N C8* 00 ma R 0.2 / 2 W C C 80 pf C Si92DY- C F R2 7 k (27 k for Si92DY-) *Optional V IN 0 to 0 V FIGURE 2. Si92 Application with External Vcc Through Winding 8

9 Package Information SOIC (NARROW): 8-LEAD JEDEC Part Number: MS E H 2 S D A 0.2 mm (Gage Plane) h x C All Leads e B A L q 0.0 mm 0.00" MILLIMETERS INCHES DIM Min Max Min Max A A B C D E e.27 BSC 0.00 BSC H h L q S ECN: C-027-Rev. I, -Sep-0 DWG: 98 Document Number: 792 -Sep-0

10 Legal Disclaimer Notice Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, Vishay ), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer s technical experts. Product specifications do not expand or otherwise modify Vishay s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. 207 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED Revision: 08-Feb-7 Document Number: 9000

Low-Voltage Switchmode Controller

Low-Voltage Switchmode Controller End of Life. Last Available Purchase Date is 31-Dec-2014 Si9145 Low-Voltage Switchmode Controller FEATURES 2.7-V to 7-V Input Operating Range Voltage-Mode PWM Control High-Speed, Source-Sink Output Drive

More information

Adaptive Power MOSFET Driver 1

Adaptive Power MOSFET Driver 1 End of Life. Last Available Purchase Date is 3-Dec-204 Si990 Adaptive Power MOSFET Driver FEATURES dv/dt and di/dt Control Undervoltage Protection Short-Circuit Protection t rr Shoot-Through Current Limiting

More information

Universal Input Switchmode Controller

Universal Input Switchmode Controller End of Life. Last Available Purchase Date is 31-Dec-2014 Si9120 Universal Input Switchmode Controller FEATURES 10- to 450-V Input Range Current-Mode Control 125-mA Output Drive Internal Start-Up Circuit

More information

Synchronous Buck Converter Controller

Synchronous Buck Converter Controller Product is End of Life 3/204 Synchronous Buck Converter Controller Si950 DESCRIPTION The Si950 synchronous buck regulator controller is ideally suited for high-efficiency step down converters in battery-powered

More information

High-Voltage Switchmode Controller

High-Voltage Switchmode Controller End of Life. Last Available Purchase Date is 31-Dec-2014 Si9112 High-Voltage Switchmode Controller FEATURES 9- to 80-V Input Range Current-Mode Control High-Speed, Source-Sink Output Drive High Efficiency

More information

PSM Buck Converter with Dynamic Adjustable Output and Bypass Capability

PSM Buck Converter with Dynamic Adjustable Output and Bypass Capability New Product Si9172 PSM Buck Converter with Dynamic Adjustable Output and Bypass Capability 2.7- to 6- Input oltage Range Dynamic Adjustable 1.5- to 3.6- Output. Power Conversion Efficiency of 95% at 170-mA

More information

200-mA PSM Step Down Converter with Bypass Capability

200-mA PSM Step Down Converter with Bypass Capability New Product Si9177 200-mA PSM Step Down Converter with Bypass Capability FEATURES 2.7-V to 6-V Input Voltage Range 1.2-V to 5-V Output Efficiency of 95% for of 3.3 V @ 200-mA Load Selectable Pulse Skipping

More information

Dual N-Channel 30-V (D-S) MOSFET

Dual N-Channel 30-V (D-S) MOSFET Dual N-Channel -V (D-S) MOSFET PRODUCT SUMMARY V DS (V) R DS(on) (Ω) I D (A).3 at V GS = V 5.9.53 at V GS = 4.5 V 4.9 FEATURES Halogen-free According to IEC 49-- Definition TrenchFET Power MOSFET Compliant

More information

Dual P-Channel 30-V (D-S) MOSFET

Dual P-Channel 30-V (D-S) MOSFET Dual P-Channel 3-V (D-S) MOSFET PRODUCT SUMMARY V DS (V) R DS(on) (Ω) I D (A).25 at V GS = - V - 7. - 3.4 at V GS = - 4.5 V - 5.5 FEATURES Halogen-free According to IEC 6249-2-2 Definition TrenchFET Power

More information

Slew Rate Controlled Load Switch

Slew Rate Controlled Load Switch Product is End of Life 12/2014 SiP4280 Slew Rate Controlled Load Switch FEATURES 1.8 V to 5.5 V Input Voltage range Very Low R DS(ON), typically 80 mω (5 V) Slew rate limited turn-on time options - SiP4280-1:

More information

High-Speed Quad Monolithic SPST CMOS Analog Switch

High-Speed Quad Monolithic SPST CMOS Analog Switch DG27B High-Speed Quad Monolithic SPST CMOS Analog Switch DESCRIPTION The DG27B high speed quad single-pole single-throw analog switch is intended for applications that require low on-resistance, low leakage

More information

1-W High-Voltage Switchmode Regulator

1-W High-Voltage Switchmode Regulator End of Life. Last Available Purchase Date is 3-Dec-20 Si905 -W High-Voltage Switchmode Regulator FEATURES CCITT Compatible Current-Mode Control Low Power Consumption (less than 5 mw) 0- to 20-V Input Range

More information

Protected 1-A High-Side Load Switch

Protected 1-A High-Side Load Switch Product is End of Life 2/24 Protected -A High-Side Load Switch SiP463A, SiP463B DESCRIPTION SiP463A, SiP463B is a protected highside power switch. It is designed to operate from voltages ranging from 2.4

More information

CAN Bus Driver and Receiver

CAN Bus Driver and Receiver Product is End of Life 12/2014 CAN Bus Driver and Receiver Si9200 DESCRIPTION The Si9200EY is designed to interface between the Intel 82526 CAN controller and the physical bus to provide drive capability

More information

N-Channel 100 V (D-S) MOSFET

N-Channel 100 V (D-S) MOSFET Si9DY N-Channel V (D-S) MOSFET PRODUCT SUMMARY V DS (V) R DS(on) ( ) Max. I D (A) a Q g (Typ.). at V GS = V 9.7.5 at V GS = 7.5 V 9.2 27.9 nc.2 at V GS = 6. V 8 SO-8 S 8 D S 2 7 D S 3 6 D G 5 D FEATURES

More information

3-W High-Voltage Switchmode Regulator

3-W High-Voltage Switchmode Regulator End of Life. Last Available Purchase Date is -Dec-0 Si900 -W High-Voltage Switchmode Regulator FEATURES 0- to 0-V Input Range Current-Mode Control On-Chip 50-V, 5- MOSFET Switch Reference Selection Si900

More information

Dual N-Channel 30-V (D-S) MOSFET with Schottky Diode

Dual N-Channel 30-V (D-S) MOSFET with Schottky Diode Si468DY Dual N-Channel 3-V (D-S) MOSFET with Schottky Diode PRODUCT SUMMARY V DS (V) R DS(on) (Ω) I D (A) a Q g (Typ.) Channel- 3 Channel-2 3.7 at V GS = V 8..95 at V GS = 4.5 V 7.5. at V GS = V 5.2.5

More information

Dual P-Channel 60-V (D-S) 175 MOSFET

Dual P-Channel 60-V (D-S) 175 MOSFET Dual P-Channel 6-V (D-S) 75 MOSFET PRODUCT SUMMARY V DS (V) R DS(on) (Ω) I D (A).2 at V GS = - V - 3. - 6.5 at V GS = - 4.5 V - 2.8 FEATURES Halogen-free According to IEC 6249-2-2 Definition TrenchFET

More information

3-W High-Voltage Switchmode Regulator

3-W High-Voltage Switchmode Regulator 3-W High-Voltage Switchmode Regulator DESCRIPTION The high-voltage switchmode regulator is a monolithic BiC/DMOS integrated circuit which contains most of the components necessary to implement a high-efficiency

More information

Dual N-Channel 30 V (D-S) MOSFET

Dual N-Channel 30 V (D-S) MOSFET Dual N-Channel 3 V (D-S) MOSFET PRODUCT SUMMARY V DS (V) R DS(on) ( ) I D (A) Q g (Typ.) 3. at V GS = V 2..7 at V GS =.5 V 5. nc SO-8 S 8 D G 2 7 D FEATURES Halogen-free According to IEC 29-2-2 Definition

More information

Dual P-Channel 20-V (D-S) MOSFET

Dual P-Channel 20-V (D-S) MOSFET New Product Dual P-Channel 2-V (D-S) MOSFET Si9933CDY PRODUCT SUMMARY V DS (V) R DS(on) (Ω) I D (A) a, e Q g (Typ.).58 at V GS = -.5 V - - 2 8.9 at V GS = - 2.5 V - FEATURES Halogen-free Option Available

More information

Dual N-Channel 20-V (D-S) MOSFET

Dual N-Channel 20-V (D-S) MOSFET Si99CDY Dual N-Channel -V (D-S) MOSFET PRODUCT SUMMARY V DS (V) R DS(on) (Ω) I D (A) a Q g (Typ.). at V GS =.5 V. at V GS =.5 V nc SO- FEATURES Halogen-free According to IEC 9-- Definition TrenchFET Power

More information

Half-Bridge MOSFET Driver for Switching Power Supplies

Half-Bridge MOSFET Driver for Switching Power Supplies Product is End of Life / Si99 Half-Bridge MOSFET Driver for Switching Power Supplies DESCRIPTION The Si99 is a dual MOSFET high-speed driver with breakbefore-make. It is designed to operate in high frequency

More information

5 V, 1 A H-Bridge Motor Driver

5 V, 1 A H-Bridge Motor Driver , A H-Bridge Motor Driver DESCRIPTION The SIP200 is an integrated, buffered H-bridge with TTL and CMOS compatible inputs with the capability of delivering up to A continuous current at DD supply. The SIP200

More information

Automotive Dual N-Channel 40 V (D-S) 175 C MOSFET

Automotive Dual N-Channel 40 V (D-S) 175 C MOSFET Automotive Dual N-Channel 4 V (D-S) 75 C MOSFET PRODUCT SUMMARY V DS (V) 4 R DS(on) ( ) at V GS = V.35 R DS(on) ( ) at V GS = 4.5 V.48 I D (A) 8 Configuration Dual FEATURES TrenchFET Power MOSFET AEC-Q

More information

Half-Bridge MOSFET Driver for Switching Power Supplies

Half-Bridge MOSFET Driver for Switching Power Supplies Si99 Half-Bridge MOSFET Driver for Switching Power Supplies FEATURES.- to.-v Operation Undervoltage Lockout -khz to -MHz Switching Frequency Synchronous Switch Enable One Input PWM Signal Generates Both

More information

Dual N-Channel 30-V (D-S) MOSFET with Schottky Diode

Dual N-Channel 30-V (D-S) MOSFET with Schottky Diode Si483CDY Dual N-Channel 3-V (D-S) MOSFET with Schottky Diode PRODUCT SUMMARY V DS (V) R DS(on) (Ω) I D (A) a, e Q g (Typ.) Channel- 3 Channel-2 3.2 at V GS = V 8..25 at V GS = 4.5 V 8..2 at V GS = V 8..25

More information

N- and P-Channel 30 V (D-S) MOSFET

N- and P-Channel 30 V (D-S) MOSFET N- and P-Channel 3 V (D-S) MOSFET PRODUCT SUMMARY V DS (V) R DS(on) ( ) I D (A) a Q g (Typ.) N-Channel 3.47 at V GS = V 6..65 at V GS = 4.5 V 5.2 2.75 P-Channel - 3.89 at V GS = - V - 4.3.4 at V GS = -

More information

Dual P-Channel 40 V (D-S) MOSFET

Dual P-Channel 40 V (D-S) MOSFET Dual P-Channel V (D-S) MOSFET PRODUCT SUMMARY V DS (V) R DS(on) ( ) I D (A) d Q g (Typ.) -.27 at V GS = - V - 8.3 at V GS = -.5 V - 7.2 2.7 nc SO-8 S 8 D G 2 7 D S 2 3 D 2 G 2 5 D 2 FEATURES Halogen-free

More information

Dual P-Channel 20-V (D-S) MOSFET

Dual P-Channel 20-V (D-S) MOSFET New Product Dual P-Channel 2-V (D-S) MOSFET Si93CDY PRODUCT SUMMARY V DS (V) R DS(on) (Ω) I D (A) a, e Q g (Typ.) - 2.92 at V GS = - V - 8.33 at V GS = -.5 V - 8 2 SO-8 S 8 D G 2 7 D FEATURES Halogen-free

More information

1.2 A Slew Rate Controlled Load Switch

1.2 A Slew Rate Controlled Load Switch 1.2 A Slew Rate Controlled Load Switch DESCRIPTION The SiP4282 series is a slew rate controlled high side switch. The switch is of a low ON resistance P-Channel MOSFET that supports continuous current

More information

N-Channel 100-V (D-S) 175 C MOSFET

N-Channel 100-V (D-S) 175 C MOSFET N-Channel -V (D-S) 75 C MOSFET SUD4N-25 PRODUCT SUMMARY V DS (V) R DS(on) (Ω) I D (A).25 at V GS = V 4.28 at V GS = 4.5 V 38 FEATURES TrenchFET Power MOSFET 75 C Maximum Junction Temperature % R g Tested

More information

N-Channel 150-V (D-S) MOSFET

N-Channel 150-V (D-S) MOSFET Si3440DV N-Channel 50-V (D-S) MOSFET PRODUCT SUMMARY V DS (V) R DS(on) (Ω) I D (A) 50 0.375 at V GS = 0 V.5 0.400 at V GS = 6.0 V.4 TSOP-6 Top View FEATURES Halogen-free According to IEC 649-- Definition

More information

N-Channel 100 V (D-S) MOSFET

N-Channel 100 V (D-S) MOSFET N-Channel V (D-S) MOSFET SUDN-5L-GE PRODUCT SUMMARY V DS (V) R DS(on) ( ) I D (A) Q g (Typ). at V GS = V.5.7.5 at V GS = 4.5 V FEATURES TrenchFET Power MOSFETs Material categorization: For definitions

More information

Precision Quad SPDT Analog Switch

Precision Quad SPDT Analog Switch Precision Quad SPDT Analog Switch DESCRIPTION The consist of four independently controlled single-pole double-throw analog switches. These monolithic switch is designed to control analog signals with a

More information

N- and P-Channel 30-V (D-S) MOSFET

N- and P-Channel 30-V (D-S) MOSFET Si355DV N- and P-Channel 3-V (D-S) MOSFET PRODUCT SUMMARY V DS (V) R DS(on) (Ω) I D (A) N-Channel 3.5 at V GS = V.5.75 at V GS =.5 V. P-Channel - 3. at V GS = - V -..3 at V GS = -.5 V -. FEATURES Halogen-free

More information

High Frequency 600-mA Synchronous Buck/Boost Converter

High Frequency 600-mA Synchronous Buck/Boost Converter High Frequency 600-mA Synchronous Buck/Boost Converter FEATURES Voltage Mode Control Fully Integrated MOSFET Switches 2.7-V to 6-V Input Voltage Range Programmable Control Up to 600-mA Output Current @

More information

P-Channel 2.5-V (G-S) MOSFET

P-Channel 2.5-V (G-S) MOSFET Si3443BDV P-Channel.5-V (G-S) MOSFET PRODUCT SUMMARY V DS (V) R DS(on) (Ω) I D (A) 0.060 at V GS = - 4.5 V - 4.7-0 0.090 at V GS = -.7 V - 3.8 0.00 at V GS = -.5 V - 3.7 FEATURES Halogen-free According

More information

N-Channel 12 V (D-S) MOSFET

N-Channel 12 V (D-S) MOSFET N-Channel 2 V (D-S) MOSFET SiUD42ED.4 mm PowerPAK 86 Single D 3 FEATURES TrenchFET power MOSFET Ultra small.8 mm x.6 mm outline Ultra thin.4 mm max. height Typical ESD protection 5 V (HBM).8 mm Top View.6mm

More information

P-Channel 30-V (D-S), MOSFET

P-Channel 30-V (D-S), MOSFET SUD5P3- P-Channel 3-V (D-S), MOSFET PRODUCT SUMMARY V DS (V) R DS(on) (Ω) (A) a. at V GS = - V - 5-3.8 at V GS = -.5 V - 2 FEATURES TrenchFET Power MOSFETs RoHS COMPLIANT S TO-252 G Drain Connected to

More information

N-Channel 20-V (D-S) MOSFET

N-Channel 20-V (D-S) MOSFET Si4EDS N-Channel -V (D-S) MOSFET PRODUCT SUMMARY V DS (V) R DS(on) (Ω) I D (A). at V GS = 4.5 V 4.9.4 at V GS =.5 V 4.4.5 at V GS =.8 V.9 FEATURES Halogen-free According to IEC 649-- Available TrenchFET

More information

Half-Bridge N-Channel MOSFET Driver for DC/DC Conversion

Half-Bridge N-Channel MOSFET Driver for DC/DC Conversion Half-Bridge N-Channel MOSFET Driver for DC/DC Conversion DESCRIPTION The SiP41104 is a high-speed half-bridge MOSFET driver for use in high frequency, high current, multiphase dc-to-dc synchronous rectifier

More information

P-Channel 30-V (D-S) MOSFET

P-Channel 30-V (D-S) MOSFET New Product P-Channel 3-V (D-S) MOSFET Si357CDV PRODUCT SUMMARY V DS (V) R DS(on) (Ω) I D (A) a Q g (Typ.).7 at V GS = - V - 5. - 3.3 at V GS = -.5 V -. 5. nc FEATURES Halogen-free According to IEC 69--

More information

Improved Quad CMOS Analog Switches

Improved Quad CMOS Analog Switches Improved Quad CMOS Analog Switches DESCRIPTION The analog switches are highly improved versions of the industry-standard DG2A, DG22. These devices are fabricated in proprietary silicon gate CMOS process,

More information

DG2715, DG2716. Low-Voltage, 0.4 R ON, Single SPST Analog Switch. Vishay Siliconix DESCRIPTION FEATURES BENEFITS APPLICATIONS

DG2715, DG2716. Low-Voltage, 0.4 R ON, Single SPST Analog Switch. Vishay Siliconix DESCRIPTION FEATURES BENEFITS APPLICATIONS DG275, DG276 Low-Voltage, 0.4 R ON, Single SPST Analog Switch DESCRIPTION The DG275, DG276 are low voltage, single supply, dual SPST analog switches. Designed for high performance switching of analog signals,

More information

Slew Rate Controlled Load Switch

Slew Rate Controlled Load Switch Product is End of Life 12/2014 Slew Rate Controlled Load Switch SiP4280A FEATURES 1.5 V to 5.5 V Input Voltage range Very Low R DS(ON), typically 80 mω (5 V) Slew rate limited turn-on time options - SiP4280A-1:

More information

P-Channel 30-V (D-S) MOSFET

P-Channel 30-V (D-S) MOSFET P-Channel 30-V (D-S) MOSFET MOSFET PRODUCT SUMMARY V DS (V) R DS(on) (Ω) I D (A) a Q g (Typ.) 0.90 at V GS = - 0 V -.7-30 0.330 at V GS = - 4.5 V -. nc FEATURES Halogen-free According to IEC 649-- Available

More information

N- and P-Channel 2.5-V (G-S) MOSFET

N- and P-Channel 2.5-V (G-S) MOSFET N- and P-Channel.5-V (G-S) MOSFET PRODUCT SUMMARY V DS (V) (Ω) (A) N-Channel. at = 4.5 V ± 4.5.4 at =.5 V ± 3.9 P-Channel -.5 at = - 4.5 V ± 3.5.85 at = -.5 V ±.7 FEATURES Halogen-free Option Available

More information

N-Channel 30 V (D-S) MOSFET

N-Channel 30 V (D-S) MOSFET N-Channel 3 V (D-S) MOSFET SUD5N3-12P-GE3 PRODUCT SUMMARY V DS (V) R DS(on) (Ω) I D (A) a.12 at V GS = 1 V 16.8 3.175 at V GS = 4.5 V 13.9 FEATURES TrenchFET power MOSFET 1 % R g and UIS tested Material

More information

Automotive N-Channel 300 V (D-S) 175 C MOSFET

Automotive N-Channel 300 V (D-S) 175 C MOSFET Automotive N-Channel 300 V (D-S) 175 C MOSFET PRODUCT SUMMARY V DS (V) 300 R DS(on) (Ω) at V GS = V 0.330 I D (A) Configuration Single TO-252 D FEATURES TrenchFET power MOSFET Package with low thermal

More information

N-Channel 60-V (D-S) MOSFET

N-Channel 60-V (D-S) MOSFET Si8DS N-Channel -V (D-S) MOSFET PRODUCT SUMMARY V DS (V) R DS(on) (Ω) I D (A). at V GS = V.. at V GS = 4.5 V.7 FEATURES Halogen-free According to IEC 4-- Available TrenchFET Power MOSFET % R g Tested TO-

More information

Automotive P-Channel 80 V (D-S) 175 C MOSFET

Automotive P-Channel 80 V (D-S) 175 C MOSFET Automotive P-Channel 8 V (D-S) 175 C MOSFET PRODUCT SUMMARY V DS (V) - 8 R DS(on) () at V GS = - 1 V.25 R DS(on) () at V GS = - 4.5 V.31 I D (A) - 5 Configuration Single FEATURES TrenchFET Power MOSFET

More information

N-Channel 2.5-V (G-S) Battery Switch, ESD Protection

N-Channel 2.5-V (G-S) Battery Switch, ESD Protection N-Channel.-V (G-S) Battery Switch, ESD Protection Si694AEDQ PRODUCT SUMMARY V DS (V) R DS(on) (Ω) I D (A).33 at V GS = 4. V 4.6 8.38 at V GS = 3. V 4.3.4 at V GS =. V 4. FEATURES Halogen-free Low R DS(on)

More information

P-Channel 60-V (D-S) MOSFET

P-Channel 60-V (D-S) MOSFET New Product P-Channel 60-V (D-S) MOSFET Si309CDS PRODUCT SUMMARY V DS (V) R DS(on) (Ω) I D (A) d Q g (Typ.) - 60 0.345 at V GS = - 0 V -.6 0.450 at V GS = - 4.5 V -.4 TO-36 (SOT-3).7 nc FEATURES Halogen-free

More information

N-Channel 250 V (D-S) 175 C MOSFET

N-Channel 250 V (D-S) 175 C MOSFET SUP4N25-6 N-Channel 25 V (D-S) 75 C MOSFET PRODUCT SUMMARY V DS (V) R DS(on) ( ) (A) Q g (Typ) 25 TO-22AB.6 at V GS = V 4.64 at V GS = 6 V 38.7 95 FEATURES TrenchFET Power MOSFETS 75 C Junction Temperature

More information

P-Channel 20 V (D-S) MOSFET with Schottky Diode

P-Channel 20 V (D-S) MOSFET with Schottky Diode P-Channel 20 V (D-S) MOSFET with Schottky Diode Si4823DY PRODUCT SUMMARY V DS (V) R DS(on) (Ω) I D (A) d Q g (Typ.) - 20 0.08 at V GS = - 4.5 V - 4. 0.75 at V GS = - 2.5 V - 3.3 SCHOTTKY PRODUCT SUMMARY

More information

P-Channel 20 V (D-S) MOSFET

P-Channel 20 V (D-S) MOSFET Si33CDS P-Channel V (D-S) MOSFET MOSFET PRODUCT SUMMARY V DS (V) R DS(on) ( ) I D (A) a Q g (Typ.) -.39 at V GS = -4.5 V -6 e.5 at V GS = -.5 V -5.8.63 at V GS = -.8 V -5. TO-36 (SOT-3) 9 nc FEATURES TrenchFET

More information

Half-Bridge N-Channel Programmable 1-A MOSFET Driver for DC/DC Conversion with Adjustable High Side Propagation Delay

Half-Bridge N-Channel Programmable 1-A MOSFET Driver for DC/DC Conversion with Adjustable High Side Propagation Delay New Product Half-Bridge N-Channel Programmable 1-A MOSFET Driver for DC/DC Conversion with Adjustable High Side Propagation Delay FEATURES 8-V or 12-V Low-Side Gate Drive Undervoltage Lockout Internal

More information

N- and P-Channel 60-V (D-S), 175 C MOSFET

N- and P-Channel 60-V (D-S), 175 C MOSFET N- and P-Channel -V (D-S), 75 C MOSFET Si4559EY PRODUCT SUMMARY V DS (V) R DS(on) (Ω) I D (A) N-Channel.55 at V GS = V ± 4.5.75 at V GS = 4.5 V ± 3.9 P-Channel -.2 at V GS = - V ± 3..5 at V GS = - 4.5

More information

Low-Voltage Single SPDT Analog Switch

Low-Voltage Single SPDT Analog Switch Low-Voltage Single SPDT Analog Switch DG9411 DESCRIPTION The DG9411 is a single-pole/double-throw monolithic CMOS analog switch designed for high performance switching of analog signals. Combining low

More information

Half-Bridge N-Channel MOSFET Driver for DC/DC Conversion

Half-Bridge N-Channel MOSFET Driver for DC/DC Conversion Half-Bridge N-Channel MOSFET Driver for DC/DC Conversion DESCRIPTION The SiP41109 and SiP41110 are high-speed half-bridge MOSFET drivers for use in high frequency, high current, multiphase dc-to-dc synchronous

More information

N-Channel 60 V (D-S), MOSFET

N-Channel 60 V (D-S), MOSFET N-Channel 6 V (D-S), MOSFET PRODUCT SUMMARY V DS (V) R DS(on) ( ) I D (A) a Q g (Typ.).3 at V GS = V 9. 6 6.5 nc.45 at V GS = 4.5 V 7.6 FEATURES Halogen-free According to IEC 6249-2-2 Definition TrenchFET

More information

P-Channel 20 V (D-S) MOSFET

P-Channel 20 V (D-S) MOSFET P-Channel 2 V (D-S) MOSFET PRODUCT SUMMARY V DS (V) R DS(on) ( ) Max. I D (A) a Q g (Typ.) - 2.32 at V GS = - 4.5 V - 5.9.4 at V GS = - 2.5 V - 5.2.675 at V GS = -.8 V - 4.3 G TO-236 (SOT-23) 3.8 nc FEATURES

More information

Dual N-Channel 30 V (D-S) MOSFET

Dual N-Channel 30 V (D-S) MOSFET Dual N-Channel 3 V (D-S) MOSFET PRODUCT SUMMARY V DS (V) R DS(on) (Ω) I D (A). at V GS = V 7.5 3.3 at V GS = 4.5 V 6.5 FEATURES Halogen-free According to IEC 649-- Definition TrenchFET Power MOSFET PWM

More information

P-Channel 100-V (D-S) 175 C MOSFET

P-Channel 100-V (D-S) 175 C MOSFET P-Channel -V (D-S) 75 C MOSFET SUD5P-43L PRODUCT SUMMARY V DS (V) R DS(on) (Ω) I D (A) a Q g (Typ.).43 at V GS = - V - 37-54 nc.48 at V GS = - 4.5 V - 35 FEATURES TrenchFET Power MOSFET Compliant to RoHS

More information

N-Channel Synchronous MOSFETs With Break-Before-Make

N-Channel Synchronous MOSFETs With Break-Before-Make New Product Si4738CY N-Channel Synchronous MOSFETs With Break-Before-Make FEATURES 0- to 20-V Operation Under-Voltage Lockout Shoot Through Resistant Fast Switching Times SO-16 Package Driver Impedance

More information

N-Channel 30-V (D-S) MOSFET

N-Channel 30-V (D-S) MOSFET Si36BDS N-Channel 3-V (D-S) MOSFET PRODUCT SUMMARY V DS (V) R DS(on) (Ω) I D (A) Q g (Typ.).7 at V GS = V. 3 3..65 at V GS =.5 V 3.5 FEATURES Halogen-free Option Available TrenchFET Power MOSFET % R g

More information

P-Channel 20-V (D-S) MOSFET

P-Channel 20-V (D-S) MOSFET Si33DS P-Channel 0-V (D-S) MOSFET PRODUCT SUMMARY V DS (V) R DS(on) (Ω) I D (A) 0.039 at V GS = - 4.5 V - 4.7-0 0.05 at V GS = -.5 V - 4. 0.068 at V GS = -.8 V - 3.5 FEATURES Halogen-free According to

More information

Dual 2 A, 1.2 V, Slew Rate Controlled Load Switch

Dual 2 A, 1.2 V, Slew Rate Controlled Load Switch Dual 2 A,.2 V, Slew Rate Controlled Load Switch DESCRIPTION SiP3243, SiP3244 and SiP3246 are slew rate controlled load switches that is designed for. V to 5.5 V operation. The devices guarantee low switch

More information

Power MOSFET. IRFD020PbF SiHFD020-E3 IRFD020 SiHFD020

Power MOSFET. IRFD020PbF SiHFD020-E3 IRFD020 SiHFD020 Power MOSFET PRODUCT SUMMARY V DS (V) 50 R DS(on) ( ) V GS = 10 V 0.10 Q g (Max.) (nc) 24 Q gs (nc) 7.1 Q gd (nc) 7.1 Configuration Single D HVMDIP S G ORDERING INFORMATION Package Lead (Pb)-free SnPb

More information

Low-Voltage, Low R ON, SPDT Audio Switch with Negative Swing Capability

Low-Voltage, Low R ON, SPDT Audio Switch with Negative Swing Capability Low-Voltage, Low R ON, SPDT Audio Switch with Negative Swing Capability DG6, DG63 DESCRIPTION The DG6, DG63 is a low on-resistance, single-pole/ double-throw monolithic CMOS analog switch with negative

More information

Dual N-Channel 60-V (D-S) MOSFET

Dual N-Channel 60-V (D-S) MOSFET Dual N-Channel -V (D-S) MOSFET PRODUCT SUMMARY V DS (V) R DS(on) (Ω) I D (A) Q g (Typ.).38 at V GS = V 7..3 at V GS =. V.8 9. nc SO-8 FEATURES Halogen-free According to IEC 9-- Definition TrenchFET Power

More information

Automotive N-Channel 100 V (D-S) 175 C MOSFET

Automotive N-Channel 100 V (D-S) 175 C MOSFET Automotive N-Channel V (D-S) 75 C MOSFET PRODUCT SUMMARY V DS (V) R DS(on) ( ) at V GS = V.38 I D (A) 2 Configuration TO-263 Single D FEATURES TrenchFET Power MOSFET Package with Low Thermal Resistance

More information

N-Channel 40-V (D-S) MOSFET

N-Channel 40-V (D-S) MOSFET SUD5N4-8m8P N-Channel 4-V (D-S) MOSFET PRODUCT SUMMARY V DS (V) R DS(on) (Ω) I D (A) a Q g (Typ.) 4 TO-252.88 at V GS = V 5.5 at V GS = 4.5 V 5 6 nc FEATURES Halogen-free According to IEC 6249-2-2 Definition

More information

N-Channel 60 V (D-S) MOSFET

N-Channel 60 V (D-S) MOSFET N-Channel 60 V (D-S) MOSFET N700K Marking code: 7K D 3 SOT-3 (TO-36) G Top View PRODUCT SUMMARY V DS (V) 60 R DS(on) max. ( ) at V GS = 0 V Q g typ. (nc) 0.4 I D (ma) 300 Configuration Single S FEATURES

More information

P-Channel 30-V (D-S) MOSFET

P-Channel 30-V (D-S) MOSFET Si357BDV P-Channel 3-V (D-S) MOSFET PRODUCT SUMMARY V DS (V) R DS(on) (Ω) (A).5 at V GS = - V - 5. - 3. at V GS = -.5 V - 3.7 FEATURES Halogen-free According to IEC 69-- Available TrenchFET Power MOSFETs

More information

N-Channel 100 V (D-S) MOSFET

N-Channel 100 V (D-S) MOSFET N-Channel V (D-S) MOSFET PRODUCT SUMMARY V DS (V) R DS(on) () MAX. I D (A) d Q g (TYP.).4 at V GS = V 2.46 at V GS = 7.5 V 2 TO-263 Top View S D G Ordering Information: -GE3 (Lead (Pb)-free and halogen-free)

More information

Dual N-Channel 30 V (D-S) MOSFET

Dual N-Channel 30 V (D-S) MOSFET Si9DV Dual N-Channel V (D-S) MOSFET PRODUCT SUMMARY V DS (V) R DS(on) (Ω) I D (A) a Q g (Typ.).58 at V GS = V.7.7 at V GS =.5 V. TSOP-6 Top View.8 nc FEATURES Halogen-free According to IEC 69-- Definition

More information

N-Channel 20 V (D-S) MOSFET

N-Channel 20 V (D-S) MOSFET Si3DDS N-Channel V (D-S) MOSFET PRODUCT SUMMARY V DS (V) R DS(on) (Ω) Max. I D (A) Q g (Typ.).57 at V GS =.5 V.9 3.5.75 at V GS =.5 V.6 FEATURES Halogen-free According to IEC 69-- Definition TrenchFET

More information

P-Channel 8 V (D-S) MOSFET

P-Channel 8 V (D-S) MOSFET Si9DS P-Channel 8 V (D-S) MOSFET MOSFET PRODUCT SUMMARY V DS (V) R DS(on) ( ) I D (A) a Q g (Typ.) - 8. at V GS = - 4.5 V - 6 e.6 at V GS = -.5 V - 6 e.48 at V GS = -.8 V - 5.9.68 at V GS = -.5 V - 5.

More information

Automotive P-Channel 20 V (D-S) 175 C MOSFET

Automotive P-Channel 20 V (D-S) 175 C MOSFET Automotive P-Channel V (D-S) 75 C MOSFET D 3 SOT-3 (TO-36) S FEATURES TrenchFET power MOSFET AEC-Q qualified d % R g and UIS tested Material categorization: for definitions of compliance please see /doc?999

More information

Automotive N-Channel 300 V (D-S) 175 C MOSFET

Automotive N-Channel 300 V (D-S) 175 C MOSFET Automotive N-Channel 300 V (D-S) 75 C MOSFET PRODUCT SUMMARY V DS (V) 300 R DS(on) (Ω) at V GS = 0 V 0.097 I D (A) 35 Configuration Single Package TO-263 D TO-263 FEATURES TrenchFET power MOSFET Package

More information

N-Channel 40 V (D-S) MOSFET

N-Channel 40 V (D-S) MOSFET N-Channel 4 V (D-S) MOSFET PRODUCT SUMMARY V DS (V) R DS(on) ( ) Max. I D (A) a Q g (Typ.) 4.5 at V GS = V 4.3.54 at V GS = 4.5 V 4..7 at V GS =.5 V 3.6 G S TO-36 (SOT-3) 3 D 3.8 nc FEATURES TrenchFET

More information

N-Channel 30-V (D-S) MOSFET

N-Channel 30-V (D-S) MOSFET Si6BDS N-Channel -V (D-S) MOSFET PRODUCT SUMMARY V DS (V) R DS(on) (Ω) I D (A) a Q g (Typ).5 at V GS = V 4.5.8 at V GS = 4.5 V.4.6 nc FEATURES Halogen-free According to IEC 649-- Definition TrenchFET Power

More information

P-Channel 12 V (D-S) MOSFET

P-Channel 12 V (D-S) MOSFET Si333DDS P-Channel V (D-S) MOSFET MOSFET PRODUCT SUMMARY V DS (V) R DS(on) ( ) Max. I D (A) a Q g (Typ.).8 at V GS = - 4.5 V - 6 e.3 at V GS = - 3.7 V - 6 e -.4 at V GS = -.5 V - 6 e 9 nc.63 at V GS =

More information

N- and P-Channel 20-V (D-S) MOSFET

N- and P-Channel 20-V (D-S) MOSFET N- and P-Channel -V (D-S) MOSFET PRODUCT SUMMARY V DS (V) R DS(on) (Ω) I D (A).8 at V GS =.5 V 3. N-Channel. at V GS =.5 V..8 at V GS =.8 V.3.5 at V GS = -.5 V -. P-Channel -. at V GS = -.5 V -.8.3 at

More information

Automotive N-Channel 100 V (D-S) 175 C MOSFET

Automotive N-Channel 100 V (D-S) 175 C MOSFET Automotive N-Channel V (D-S) 75 C MOSFET SQM76EL PRODUCT SUMMARY V DS (V) R DS(on) () at V GS = V.59 R DS(on) () at V GS = 4.5 V.8 I D (A) 75 Configuration Single Package TO-263 D TO-263 FEATURES TrenchFET

More information

1 W High-Voltage Switchmode Regulator

1 W High-Voltage Switchmode Regulator Product is End of Life 3/20 W High-oltage Switchmode Regulator Si908 DESCRIPTION The Si908 high-voltage switchmode regulator is a monolithic BiC/DMOS integrated circuit which contains most of the components

More information

N-Channel 150-V (D-S) MOSFET

N-Channel 150-V (D-S) MOSFET Si4848Y N-Channel -V (-S) MOSFET PROUCT SUMMARY V S (V) R S(on) (Ω) I (A).8 at V GS = V 3.7.9 at V GS = 6. V 3. FEATURES Halogen-free According to IEC 649-- efinition TrenchFET Power MOSFETs Compliant

More information

Load Switch with Level-Shift

Load Switch with Level-Shift Load Switch with Level-Shift PRODUCT SUMMARY V IN (V DS2 ) (V) R DS(on) (Ω) I D (A).5 to 2 DESCRIPTION.54 at V IN = 4.5 V 3.9.77 at V IN = 2.5 V 3.2.6 at V IN =.8 V 2.8.65 at V IN =.5 V 2.2 The includes

More information

Dual N-Channel 30-V (D-S) MOSFET

Dual N-Channel 30-V (D-S) MOSFET Dual N-Channel 3-V (D-S) MOSFET PRODUCT SUMMARY V DS (V) (Ω) I D (A).95 at V GS = V. 3. at V GS = 4.5 V 9.4 FEATURES Halogen-free Option Available TrenchFET Power MOSFET % R g Tested APPLICATIONS DC/DC

More information

Dual P-Channel 20-V (D-S) MOSFET

Dual P-Channel 20-V (D-S) MOSFET Dual P-Channel 2-V (D-S) MOSFET PRODUCT SUMMARY V DS (V) R DS(on) (Ω) I D (A) a, e Q g (Typ.).58 at V GS = - 4.5 V - 4-2 8.94 at V GS = - 2.5 V - 4 FEATURES Halogen-free Option Available TrenchFET Power

More information

P-Channel 30 V (D-S) MOSFET

P-Channel 30 V (D-S) MOSFET Si369DS P-Channel 3 V (D-S) MOSFET PRODUCT SUMMARY V DS (V) R DS(on) ( ) Max. I D (A) a Q g (Typ.) - 3.9 at V GS = - V - 7.6.34 at V GS = - 6 V - 7.4 at V GS = - 4.5 V - 6.5 G TO-36 (SOT-3) 3 D.4 nc FEATURES

More information

N-Channel 100-V (D-S) MOSFET

N-Channel 100-V (D-S) MOSFET N-Channel -V (D-S) MOSFET 3 PRODUCT SUMMARY V (BR)DSS (V) r DS(on) ( ) I D (A). at V GS = V. at V GS = V 7.5 FEATURES TrenchFET Power MOSFETS 75 C Junction Temperature Low Thermal Resistance Package Available

More information

Complementary (N- and P-Channel) MOSFET

Complementary (N- and P-Channel) MOSFET Complementary (N- and P-Channel) MOSFET Si45BDY PRODUCT SUMMARY V DS (V) R DS(on) ( ) I D (A) a Q g (Typ.) N-Channel 3.7 at V GS = V 2.2 at V GS = 4.5 V 7.9 P-Channel -.27 at V GS = - 4.5 V -.37 at V GS

More information

N-Channel 150-V (D-S) MOSFET

N-Channel 150-V (D-S) MOSFET N-Channel 5-V (D-S) MOSFET PRODUCT SUMMARY V (BR)DSS (V) R DS(on) (Ω) I D (A) Q g (Typ.) 5.8 at V GS = V 75 d 64 FEATURES TrenchFET Power MOSFET % R g and UIS Tested APPLICATIONS Primary Side Switch Power

More information

N-Channel 100 V (D-S) MOSFET

N-Channel 100 V (D-S) MOSFET Si4DS N-Channel V (D-S) MOSFET MOSFET PRODUCT SUMMARY V DS (V) R DS(on) ( ) I D (A) a Q g (Typ.).4 at V GS = V..67 at V GS = 6 V..9 nc.78 at V GS = 4.5 V.7 FEATURES TrenchFET Power MOSFET % R g Tested

More information

Dual N-Channel 20-V (D-S) MOSFET

Dual N-Channel 20-V (D-S) MOSFET Dual N-Channel -V (D-S) MOSFET PRODUCT SUMMARY V DS (V) R DS(on) (Ω) I D (A) a Q g (Typ.).8 at V GS = 4.5 V 8. at V GS =.5 V 8 nc SO-8 FEATURES Halogen-free According to IEC 49-- Definition TrenchFET Power

More information

Dual N-Channel 30 V (D-S) MOSFETs

Dual N-Channel 30 V (D-S) MOSFETs Dual N-Channel 3 V (D-S) MOSFETs PRODUCT SUMMARY Channel- 3 Channel-2 3 V DS (V) R DS(on) ( ) (Max.) I D (A) Q g (Typ.).2 at V GS = V 6 a 6.8 nc.5 at V GS =.5 V 6 a.37 at V GS = V 28 a 32 nc.5 at V GS

More information

FEATURES. Parameter Symbol Limit Unit Gate-Source Voltage V GS ± 20 V I D T C = 100 C

FEATURES. Parameter Symbol Limit Unit Gate-Source Voltage V GS ± 20 V I D T C = 100 C N-Channel 6 V (D-S) Super Junction Power MOSFET DTK63SJ PRODUCT SUMMARY V DS (V) R DS(on) ( ) I D (A) a.35 at V GS = V 3 6.42 at V GS = 4.5 V FEATURES 75 C Junction Temperature TrenchFET II Power MOSFET

More information