THT TYPE. Interface unit with built-in DO module FEATURES

Size: px
Start display at page:

Download "THT TYPE. Interface unit with built-in DO module FEATURES"

Transcription

1 INTERFACE UNIT THT TYPE FEATURES Both and DO modules of the THT type interface unit have the same structure, providing a smart appearance. The connector sockets and operation indicators are located at the center of the unit with 6 bits of and DO terminals arranged on the each side of the unit. Since the terminal blocks on the right and left sides of the unit can be divided from the main unit, the main unit can be replaced without disconnecting wires. The TJ-5.5 type test tool can be attached to the terminal block. Interface unit with built-in module The external terminal block (screw size: M) incorporates the photo-coupler module. Input voltage can be converted from 0 V DC to V DC when it is connected to the terminal block. External surge voltage applied to the control panel is insulated via the internal photo-coupler module. Thus, the interface unit can minimize surge voltage, resulting in a noise immunity improvement. Interface unit with built-in DO module The external terminal block (screw size: M) incorporates contact relays, enabling a 0 V DC to be controlled with a signal ( V DC) from a PLC. With this structure, a conventionally-required intermediate terminal block can be eliminated, enabling a remarkable reduction in the number of parts mounted in the control panel and the number of wiring steps. N87

2 FEATURES (Details) Ensuring long-term reliability To ensure reliability for a long period, the operating current of the 0 V photo-coupler drive is fixed. Preventing malfunction caused by diffraction by grounding at neutral point Operating voltage control value (60 V: No operation, 80 V: Operation) is specified to prevent malfunction. Measures for (photo-coupler) module input current Conforming to power standard (B-0) DO When input is turned ON, a transient current of several tens of amperes follows, and after cleaning the contact surface, approx. ma current flows through the. This structure results in thermal condition improvement. Up-screw type terminal block The THT type interface unit ensures high reliability in voltage fluctuation, insulation performance and noise immunity, in conformity with the power standard. DO Terminal blocks can be removed from the main unit. DO Since each terminal screw is held with a spring, the screws may not be dropped or lost. The screw size is M, which is applicable to up to 5.5 mm wire size. Operation indicator lamp The terminal blocks on both sides of the interface unit can be individually removed. Even if a failure occurs, you can replace the main unit without disconnecting wires. DO Separation of external wiring and in-panel wiring modules DO V DC output operation and power supply ON/OFF status are indicated with LEDs. Connector for V DC wiring An external wiring terminals block is located in one side, and an in-panel wiring terminals block is located on the other side. DO PLC I/O wiring connector is provided. Dedicated sequence checker 7000 V impulse withstand voltage The THT type is protected against high surge voltage (lightning impulse) between the input and ground (including the output ). DO The test jig (TJ-5.5CH) can be attached to the interface unit. Through quick connections, withstand voltage tests and sequence tests can be conducted. This method can remarkably reduces the number of in-factory test steps, contributing to a work efficiency improvement. N88 NEW PRODUCTS INTERFACE

3 INTERFACE UNIT THT TYPE STANDARD PRODUCTS THT-X09 terminal block structure Marker strip Sequence checker insertion slot Terminal cover Up-screw type Photo-coupler module Joint part Printed board Dimensions M terminal screw Terminal unit mounting screw Model indication (on side bottom) LED operation indicator (Yellow) LED power indicator (Green) M.5 terminal screw (with terminal cover) Assumes a FUJITSU connector (FCN67J00) is connected FUJITSU 0-pin connector Circuit diagram module module Test tool insertion slot module Test tool insertion slot N89

4 THT-X09 [ terminal block] Operating conditions No. Item Normal service conditions Ratings Operating temperature Storing temperature Relative humidity Altitude -0 to 55 C -0 to 60 C 0 to 80% 000 m max. No. Item Ratings INTERFACE No condensation, no freezing NEW PRODUCTS Input Output Performance Circuit voltage Current carrying capacity Input impedance 00 / 0V DC (80 to V DC) Approx..6 ma (at 0 V DC) (Inrush current at input: approx. 0 ma) Approx. 68 k (at 00 V DC) Malfunction prevention 60 V DC or lower: Photo-coupler operation disabled 80 V DC or higher: Complete operation Circuit voltage Leak current at OFF Rated load current Operating time Reset time V DC (Maximum allowable voltage: 0 V DC) 0 µa max. 5 ma max. 50 µs max. 5 ms max. No. Item Performance Insulation resistance Between electric and ground Between input and output s 0 M or more (500 V DC Megger tester) 5 M or more (500 V DC Megger tester) Power-frequency withstand voltage Between input and ground Between output and ground Between input and output s 000 V AC (60 Hz) for minute 500 V AC (60 Hz) for minute 000 V AC (60 Hz) for minute Lightning impulse withstand voltage Between input and ground (including output ) ±7000 V (. x 50 µs), times Oscillatory surge voltage Between input and ground Between input terminals st pulse height:.5 to kv Oscillation frequency:.0 to.5 MHz / damping time: 6 µs or more Repeat cycle: at least 50 times/sec Test output impedance: 50 to 00 or more, continuously for seconds 5 Square wave impulse noise Between input and ground Between input terminals Voltage (Vp): kv ±0% Polarity: Positive and negative Output: Coaxial Dynamic output impedance: 50 Rising time (Tr): ns ±0% Pulse width (Tw): 00 ns ±0% Repeat frequency: 50/60 Hz or more, continuously for seconds Radio interference noise Electrostatic discharge noise Vibration resistance Shock resistance Reference data on internal module Circuit configuration 50 / 00 / 900 MHz band radio waves Electrostatic discharge (contact): 8 kv Electrostatic discharge (air): kv At least 0 times each, for positive polarity only Acceleration: 9.8 m/s, Vibration time: 800 s in -axis directions 9 m/s in -axis directions each Operation chart (Ta=5 C) This module provides a to run an inrush current at voltage input, providing the following operating characteristic: This module provides a to run a constant current at a rated voltage or higher voltage, providing the following operating characteristic: VIN ( ma) Inrush current Approx. 0 ma (at 00 V) ( ma) Steady-state radio wave Approx..7 ma (at 00 V) ( t ) Running inrush current for approx. 0 ms ( V ) VCC VON 00 µs max. TON VSAT(max). TOFF VOFF ms max. N90

5 INTERFACE UNIT THT TYPE STANDARD PRODUCTS THT-X09 DO terminal block structure Marker strip Sequence checker insertion slot Terminal cover Up-screw type Joint part Relay Printed board Dimensions M terminal screw Terminal unit mounting screw Model indication (on side bottom) LED operation indicator (Yellow) LED power indicator (Green) M.5 terminal screw (with terminal cover) Assumes a FUJITSU connector (FCN67J00) is connected FUJITSU 0-pin connector Circuit diagram Test tool insertion slot Test tool insertion slot N9

6 THT-X09 [DO terminal block] INTERFACE NEW PRODUCTS Operating conditions No. Item Operating conditions Ratings No. Item Ratings Input (Terminal block) Output Performance Operating temperature Storing temperature Relative humidity Altitude CN side Terminal side Coil voltage Current consumption Coil resistance Operating time Reset time Circuit voltage Circuit operating current Circuit voltage Circuit operating current -0 to 55 C -0 to 60 C 0 to 80% 000 m max. V DC±0%.5mA (at rated input) 90 0 ms max. 0 ms max. V DC 0mA (Pin) 00/0 V DC or V DC 5 A (max.) No. Item Performance Insulation resistance Power-frequency withstand voltage Lightning impulse withstand voltage Oscillatory surge voltage Between electric and ground Between terminal side output contact/cn side output contact and coil Between terminal side output contact and ground Between CN side output contact/coil and ground Between terminal side output contact/cn side output contact and coil Between terminal side output contact/ and ground (including CN side output contact and coil ) Between terminal side output and ground Between terminal side output terminals No condensation, no freezing 0 M or more (500 V DC Megger tester) 5 M or more (500 V DC Megger tester) 000 V AC (60 Hz) for minute 500 V AC (60 Hz) for minute 000 V AC (60 Hz) for minute ±500 V (. x 50 µs), times st pulse height:.5 to kv Oscillation frequency:.0 to.5 MHz / damping time: 6 µs or more Repeat cycle: at least 50 times/sec Test output impedance: 50 to 00 or more, continuously for seconds 5 Square wave impulse noise Between terminal side output and ground Between terminal side output terminals Voltage (Vp): kv ±0% Polarity: Positive and negative Output: Coaxial Dynamic output impedance: 50 Rising time (Tr): ns ±0% Pulse width (Tw): 00 ns ±0% Repeat frequency: 50/60 Hz or more, continuously for seconds Reference data on internal relay contact (OMRON, G6B) No. Item Operating conditions 5 6 Radio interference noise Electrostatic discharge noise Vibration resistance Shock resistance Rated load Rated operating current Max. contact voltage Max. contact current Max. switching capacity Failure rate (Reference value) 50 / 00 / 900 MHz band radio waves Electrostatic discharge (contact): 8 kv Electrostatic discharge (air): kv At least 0 times each, for positive polarity only Acceleration: 9.8 m/s, Vibration time: 800 s in -axis directions 9 m/s in -axis directions each Resistance load: AC50V 5A/DC0V 5A Inductive load: AC50V.5A (cosø=0.) / DC0V.5A (L/R=7ms) 5A 80V AC 5V DC Resistance load: 5A AC/5A DC Inductive load: 5A AC(cosø=0.)/5A DC(L/R=7ms) Resistance load: 50VA AC/50W DC Inductive load: 75VA AC(cosø=0.)/80W DC(L/R=7ms) 5V DC 0mA (Level P) ( 60 = 0. x 0-6 /number of operations) N9

7 INTERFACE UNIT THT TYPE HOW TO ORDER Refer to the following type coding: Type coding THT -X09 ①: Basic type ②: Circuit arrangement ③: Rail designation Code XD XF KD XD rail XF rail, KD rail, Conformable standards JEC 500(987) Protection relay for power supply B-0 (October 997) Digital protection relay and protection relay equipment JIS C 8(995) Industrial terminal block JIS C 070(995) Insulation distance, insulation resistance, and withstand voltage for control equipment This product does not cover the entire range of the above standards. The product has undergone tests on applicable items among the requirements of the above standards. N9 Rail shape Punched U-cut TKB type (reinforced) N rail Punched, Rail TXB type N rail 5

8 ACCESSORIES THT connector cover (Order unit: 5) Marker strip Cover TUC- (Order unit: 00) TUM--0.5t (Order unit: 0) 900,000 Plate thickness t= Aluminum rail TXB (Order unit: 50) TXB Aluminum rail TKB End clamp TXL (Order unit: 50) (Order unit: 50) TKB M 0 5,000 5, Sequence checker (Order unit: 0) TJ-5.5CH No. of poles PC (Joint type) Jumper Plug (For poles) (Order unit: 0) SBCB- XC-P-B L (5 poles max.) ø.5 6 A Type name For poles SBCB A 6 6 L Remover Receptacle contactor element MIC-NQ (MIC) Mark II (manufactured by AMP) Used to pull out a receptacle from the XC plug For poles SBCB- Refer to the IS-59J (959-) and IS-60J (75500-) crimping tool instruction manuals supplied by AMP. Instruction Applicable wire Insulation coat Material and finish Model of receptacle size (mm ) Tape Loose piece manual for tool Push Raise 0. to 0.89 Pull out the lead wire.5 to to.7 N9. to. Brass / Tin plated Brass / Partial gold plated Phosphor bronze / Tin plated Brass / Tin plated 777- Brass / Partial gold plated Phosphor bronze / Tin plated NEW PRODUCTS INTERFACE

9 INTERFACE UNIT THT TYPE REFERENCE PRODUCTS [TCT type module terminal block] Features ) outputs (insulated) are available with input. (Operation indicator is provided.) ) replacement is enabled for each bit. ) External wire of up to 5.5 mm size can be connected. Type coding TCT- X08 - KD5 Basic type Circuit arrangement: Available in several types. Terminal specifications: No indication = Zinc, SUS = Stainless steel Number of units: Number of units mounted in series Rail type: No indication = No rail, KD5 = stage, Other = (Contact us for information) Dimensions No. 5 Photo-coupler module model name Half-pitch connector, 6P Dust cover (shaded area) (AMP made 788-5) No. 0 Dynamic connector, 6P (AMP made ) Main unit model name Motherboard Terminal screw size (Zinc or SUS) TXL (Mounting bracket) TKB KD rail Photo-coupler module Resistor board Circuit diagram Connector A (Half-pitch connector, 6P) P: P or N: N Connector B (Half-pitch connector, 6P) P: P or N: N Connector A (Dynamic connector, 6P) P: P or N: N Connector B (Dynamic connector, 6P) P: P or N: N Electrical common V DC (P) or (N) depending on power supply and application Connector shell Connector shell Constant current Photo-coupler module Noise protection ( 5) Screw terminal N95 For details of product specifications, contact us.

10 REFERENCE PRODUCTS INTERFACE NEW PRODUCTS [IOM type interface module] Features ) Up to s are incorporated in spite of compact design. ) PLC connector is provided at the top of the module. ) With separate connecter terminal block, the main unit is easy to replace. Type coding IOM -RB Basic type Circuit arrangement: Built-in relay type and photo-coupler type available, Dimensions Terminal block fastening screw Left Right Top Circuit label Bottom FCN60 connector (FUJITSU) 0 opening angle (Terminal cover) Front Terminal block can be removed with flat-blade screwdriver. (Part A) Connector terminal block Rear Circuit diagram connections [Connector N rail fastening stopper (To be removed with flat-blade screwdriver) Terminal block] connections [Terminal block Terminal block] N96 For details of product specifications, contact us.

TJ TYPE. How to order of terminal blocks TJ XF Basic type Pole Rail TJX A29 FEATURES SPECIFICATIONS (RATINGS, PERFORMANCE)

TJ TYPE. How to order of terminal blocks TJ XF Basic type Pole Rail TJX A29 FEATURES SPECIFICATIONS (RATINGS, PERFORMANCE) UNIT TYPE FEATURES Withstand voltage test and sequence check can be easily conducted with testing tools. TJ type has the similar peformance of TX type, and rail and shaft assembly can be selected. Engineering

More information

Monitoring voltages of 3-phase 4 wires with a single unit

Monitoring voltages of 3-phase 4 wires with a single unit VOLTAGE RELAY PTS TYPE High-performance under-voltage relay that activates output when all 3-phase voltages fall below a reference voltage by monitoring voltage on each phase of 4 wires FEATURES Monitoring

More information

Model Number Structure. Ordering Information. Solid-state Power OFF-delay Timer H3DE-H. Model Number Legend. List of Models

Model Number Structure. Ordering Information. Solid-state Power OFF-delay Timer H3DE-H. Model Number Legend. List of Models Solid-state Power OFF-delay Timer H3DE-H Timers Two delay-time models available. 0.1 to 12 seconds (S Series) 1 to 120 seconds (L Series) Covers wide range of supply voltage. Model Number Structure Model

More information

Distributed by: www.jameco.com -8-83-22 The content and copyrights of the attached material are the property of its owner. VDE TV-, AMP ( Form A) Power Relay HE RELAYS.299 3.8.9 RoHS Directive compatibility

More information

Corresponds to breaker size current value. Contributing to space saving by selecting an appropriate size

Corresponds to breaker size current value. Contributing to space saving by selecting an appropriate size (Some models unconformable) Corresponds to breaker size current value. Contributing to space saving by selecting an appropriate size FEATURES Reduce wiring man-hours by up-screw type. It is possible to

More information

Relays & Sockets RU Series Universal Relays. With Latching or Momentary Lever. Standard (without lever) Key features:

Relays & Sockets RU Series Universal Relays. With Latching or Momentary Lever. Standard (without lever) Key features: RU Series Universal Relays Key features: Full featured universal miniature relays Designed with environment taken into consideration Two terminal styles: plug-in and PCB mount Non-polarized LED indicator

More information

30 AMP POWER RELAY WITH SPACE SAVING DESIGN

30 AMP POWER RELAY WITH SPACE SAVING DESIGN VDE 3 AMP POWER RELAY WITH SPACE SAVING DESIGN JH-RELAYS 2..2 3.. FEATURES Many safety-oriented characteristics incorporated Contact gap: more than 3 mm. inch for Form A and 2 Form A Breakdown voltage

More information

PARM-SIZED, 16-CHANNEL RELAY TERMINALS

PARM-SIZED, 16-CHANNEL RELAY TERMINALS Pressure connector connect type Wire-direct connect type PARM-SIZED, -CHANNEL RELAY TERMINALS FEATURES Compact, space-saving design: The Relay Terminal with I/O channels measures only (W) (D) (H) mm (W).

More information

Smart Power Relay E I...

Smart Power Relay E I... Smart Power Relay E-48-8I... Description The Smart Power Relay E-48-8I.- is a remotely controllable electronic load disconnecting relay with three functions in a single unit: l electronic relay l electronic

More information

Relays & Sockets. RF1V Force Guided Relays/SF1V Relay Sockets. Certification Organization/ File Number. UL/c-UL File No.

Relays & Sockets. RF1V Force Guided Relays/SF1V Relay Sockets. Certification Organization/ File Number. UL/c-UL File No. RFV Key features: Compact and EN compliant RFV force guided relays Force guided contact mechanism (EN00 Type A TÜV approved) Contact configuration -pole (NO-NC, 3NO-NC) 6-pole (NO-NC, NO-NC, 3NO-3NC) Built-in

More information

Solid-state Timer H3DS

Solid-state Timer H3DS Solid-state Timer H3DS DIN Track Mounted, Standard 17.5-mm Width Timer Range A wide AC/DC power supply range (24 to 230 VAC/ 24 to 48 VDC) reduces the number of timer models kept in stock. (24 to 230 VAC/VDC

More information

3.5 mm contact pin pitch 1 Pole 12 A PCB direct or via socket

3.5 mm contact pin pitch 1 Pole 12 A PCB direct or via socket 41 Low profile PCB relays 8-12 - 16 41 1 & 2 Pole - Low profile (15.7 mm height) 41.31-1 Pole 12 (3.5 mm pin pitch) 41.52-2 Pole 8 (5 mm pin pitch) 41.61-1 Pole 16 (5 mm pin pitch) PCB mount - direct or

More information

3.5 mm contact pin pitch 1 Pole 12 A PCB direct or via socket

3.5 mm contact pin pitch 1 Pole 12 A PCB direct or via socket 41 Series - Low profile PCB relays 8-12 - 16 A Features 41.31 41.52 41.61 1 & 2 Pole - Low profile (15.7 mm height) 41.31-1 Pole 12 A (3.5 mm pin pitch) 41.52-2 Pole 8 A (5 mm pin pitch) 41.61-1 Pole 16

More information

TV-15, 30 AMP (1 Form A) Power Relay

TV-15, 30 AMP (1 Form A) Power Relay VDE TV-, 3 AMP ( Form A) Power Relay RELAYS Form A Plug-in type Form A type also available with 48A contact capacity FEATURES. Excellent resistance to contact welding Owing to the pre-tension and kick-off

More information

Palm-sized, 16-channel Relay Terminals

Palm-sized, 16-channel Relay Terminals Palm-sized, -channel Relay Terminals RELAY TERMINAL FEATURES. Possible to select relay for use in the relay terminal in accordance with load. [Mountable relay: PA relay and Power PhotoMOS (voltage sensitive

More information

A new approach to static electricity countermeasures

A new approach to static electricity countermeasures Advanced intelligent Sensors NEW ELECTROSTATIC SENSOR EF-SSERIES A new approach to static electricity countermeasures Measurement of surface potentials while a production line is running Phone: 8.894.42

More information

Solid-state Twin Timer

Solid-state Twin Timer Solid-state Twin Timer -F Operates in flicker- or flicker- start mode with one Unit. Independent - and -time settings. Combinations of long - or -time and short - or -time setting are possible. Long time

More information

Surface-mounting Relay

Surface-mounting Relay Surface-mounting Relay Extremely Thin SPST-NO Flat Relay, One of the Thinnest Relays in the World Dimensions of 7.(W).6(L) 4.2 mm(h) (SMD) or 3.8 mm(h) (TH) represent a reduction of approximately 2% in

More information

Relays & Sockets RY/RM RY/RM Series Miniature Relays. Part Number Selection

Relays & Sockets RY/RM RY/RM Series Miniature Relays. Part Number Selection RY/RM Series Miniature Relays Key features: RY (A), RY (A), RM (A) General purpose miniature relays A or A contact capacity Wide variety of terminal styles and coil voltages meet a wide range of applications

More information

38 Series - Relay interface modules A

38 Series - Relay interface modules A 38 Series - Relay interface modules 0.1-2 - 3-5 - 6-8 A Common features Instant ejection of relay by plastic retaining clip Integral coil indication and protection circuit EMR Electromechanical Relays

More information

38 Series - Relay interface modules A

38 Series - Relay interface modules A 38 Series - Relay interface modules 0.1-2 - 3-5 - 6-8 A Common features Instant ejection of relay by plastic retaining clip Integral coil indication and protection circuit 6.2 mm wide EMR - DC, AC or AC/DC

More information

40 mm Beam Pitch General Purpose Area Sensor. Failure monitoring

40 mm Beam Pitch General Purpose Area Sensor. Failure monitoring OTHER SUNX PRODUCTS NA0 SERIES 0 mm Beam Pitch General Purpose Area Sensor Diagnosis Self-diagnosis Interference prevention Slim and intelligent Refer to p.9l for the light curtain. Slim body Failure monitoring

More information

High Accuracy Eddy Current Type Displacement Sensor GP-A SERIES. Resolution 0.04 % F.S., Linearity ±0.5 % F.S., IP67g environment resistance

High Accuracy Eddy Current Type Displacement Sensor GP-A SERIES. Resolution 0.04 % F.S., Linearity ±0.5 % F.S., IP67g environment resistance 13 High Accuracy Eddy Current Type Sensor SERIES Related Information General terms and conditions... F- Glossary of terms... P.139 Sensor selection guide... P.9~ General precautions... P.1 PHOTO PHOTO

More information

HG RELAYS 20 AMP POWER RELAY FEATURES SPECIFICATIONS

HG RELAYS 20 AMP POWER RELAY FEATURES SPECIFICATIONS 20 AMP POWER RELAY RELAYS a 3 1.4 5 a.0 50.0 1.99 8.0 2. FEATURES Large capacity 20 A V AC resistive and 1.5 kw 3 phase 220 V AC motor loads High contact reliability after long use Usable with direct soldering,

More information

IDEC RJ22 Series Slim Power Relays (Bifurcated Contacts)

IDEC RJ22 Series Slim Power Relays (Bifurcated Contacts) IDEC RJ22 Series Slim Relays (Bifurcated Contacts) Phone: 00.94.042 - Fax:.723.4773 - Web: www.clrwtr.com - Email: info@clrwtr.com RJ Series Slim Relay Plug-in Terminal (Bifurcated Contacts) High contact

More information

Overcurrent Protection / 7SJ45

Overcurrent Protection / 7SJ45 Overcurrent Protection / SJ SIPROTEC easy SJ numerical overcurrent protection relay powered by CTs Fig. / Description SIPROTEC easy SJ numerical overcurrent protection relay powered by current transformers

More information

48 Series - Relay interface modules A. Features

48 Series - Relay interface modules A. Features Series - Relay interface modules 8-0 - 6 A Features & Pole relay interface modules, 5.8 mm wide. Ideal interface for PLC and electronic systems.3 - Pole 0 A.5 - Pole 8 A.6 - Pole 6 A coils or sensitive

More information

12 V DC ±10 % 150 ma max. 130 ma max. 120 ma max.

12 V DC ±10 % 150 ma max. 130 ma max. 120 ma max. 96 PHOTO PHOTO ON/OFF Input SERI Related Information General terms and conditions... F-3 General precautions... P.9 MEASURE panasonic.net/id/pidsx/global Multi-functional D rail mounting slim sensor controller

More information

Amplifier-separated Manual Sensitivity Setting Photoelectric Sensor

Amplifier-separated Manual Sensitivity Setting Photoelectric Sensor -separated Manual Sensitivity Setting Photoelectric Sensor Twin Adjuster Enables Delicate Sensitivity Setting Twin Adjuster Its twin adjuster enables easy optimum setting to suit the application. Twin

More information

Switching relay terminal block; Relay with 1 changeover contact (1u); with miniature switching relay

Switching relay terminal block; Relay with 1 changeover contact (1u); with miniature switching relay relay - Item No: 89-304 Switching relay terminal block; Relay with changeover contact (u); with miniature switching relay Item No: 89-304 Switching relay terminal block; Relay with changeover contact (u);

More information

Relays & Sockets. RH Series Compact Power Relays. Part Number Selection. Blade Terminal

Relays & Sockets. RH Series Compact Power Relays. Part Number Selection. Blade Terminal RH Key features SPDT through PDT, 0A contacts Compact power type relays Miniature power relays with a large capacity 0A contact capacity Compact size saves space Contact SPDT PDT PDT RH Series Compact

More information

38 SERIES. Relay interface modules A. EMR Electromechanical Relays. Common features. SSR Solid State Relays. 6.

38 SERIES. Relay interface modules A. EMR Electromechanical Relays. Common features. SSR Solid State Relays. 6. 38 Relay interface modules 0.1-2 - 3-5 - 6-8 - 16 A 38 Common features Instant ejection of relay by plastic retaining clip Integral coil indication and protection circuit 6.2 mm wide EMR - DC, AC or AC/DC

More information

6mm Interface Relays RV8 Series

6mm Interface Relays RV8 Series 6mm Interface Relays RV8 Series PRODUCT DESCRIPTION Electromechanical C1D2 (screw terminal) Solid State (spring clamp) IDEC 6mm interface relays provide a compact solution for general purpose relay requirements.

More information

Multi-voltage Multi-function. Wiring diagram (without control signal)

Multi-voltage Multi-function. Wiring diagram (without control signal) 80 Modular timers 16 A 80 Multi-function and mono-function timer range 80.01T - Multi-function & multi-voltage 80.11T - On-delay, multi-voltage Complies with EN 45545-2:2013 (protection against fire of

More information

60 Series - General purpose relays 6-10 A. Features Plug-in mount 10 A General purpose relay

60 Series - General purpose relays 6-10 A. Features Plug-in mount 10 A General purpose relay Series - General purpose relays - 0 A Features Plug-in mount 0 A General purpose relay.. & pole changeover contacts Cadmium Free contacts (preferred version) AC coils & DC coils UL Listed (certain relay/socket

More information

2 Pole CO, 8 A Plug-in 2 CO (DPDT) 1 CO (SPDT) 8/15 16/25* 250/ /400 2,000 4, /0.5/ /0.5/ (5/5) 300 (10/5)

2 Pole CO, 8 A Plug-in 2 CO (DPDT) 1 CO (SPDT) 8/15 16/25* 250/ /400 2,000 4, /0.5/ /0.5/ (5/5) 300 (10/5) 46 Series - Relays for railway applications 8-16 A 46 SERIES Features Plug-in power relays: 8 A, 2 pole 16 A, 1 pole Complies with EN 45545-2:2013 (protection against fire of materials), EN 61373 (resistance

More information

Timers GT3F. GT3F Series True Power OFF Delay Timers. Phone: Fax: Web: -

Timers GT3F. GT3F Series True Power OFF Delay Timers. Phone: Fax: Web:  - Key features: True power OFF-delay up to minutes No external control switch necessary Available with reset inputs Mountable in sockets or flush panel Specifications Operation UL, c-ul Listed File No. E55996

More information

Enclosure rating. LED indicator with test button G2R-1-SNI G2R-2-SNI Unsealed Diode. LED indicator and diode with test button G2R-1-SNDI G2R-2-SNDI

Enclosure rating. LED indicator with test button G2R-1-SNI G2R-2-SNI Unsealed Diode. LED indicator and diode with test button G2R-1-SNDI G2R-2-SNDI General-purpose Relay CSM_GR-_-S_DS_E Slim and Space-saving Power Plug-in Relay Lockable test button models now available. Built-in mechanical operation indicator. Provided with nameplate. AC type is equipped

More information

RU Series. Full featured universal miniature relays. Designed with environment taken into consideration.

RU Series. Full featured universal miniature relays. Designed with environment taken into consideration. Universal Series Safety The contact position can be confirmed through the five small windows. Using the latching lever, operation can be checked without energizing the coil. The latching lever is color

More information

Relay interface modules A

Relay interface modules A 4C SЕRIES Relay interface modules 8-10 - 16 A Escalators Road / tunnel lighting Hoists and cranes Carousel warehouses Control panels Panels for electrical distribution FINDER reserves the right to alter

More information

ON-delay operation 8-pin round socket DPDT --- H3CA-8 H3CA-8 SPDT SPDT H3CA-8H H3CA-8H

ON-delay operation 8-pin round socket DPDT --- H3CA-8 H3CA-8 SPDT SPDT H3CA-8H H3CA-8H Authorised Distributors:- Intech Systems Chennai Pvt. Ltd, Chennai-600 032 Ph: +91 44 4353 8888 Fax: 044 4353 7888 E-mail: info@intechchennai.com Website: www.intechchennai.com Solid-state Timer CSM DS_E_

More information

User s Manual. Model MA5 Distributor (Free Range Type) CAUTIONARY NOTES FOR SAFE USE OF THE PRODUCT MODEL AND SUFFIX CODES

User s Manual. Model MA5 Distributor (Free Range Type) CAUTIONARY NOTES FOR SAFE USE OF THE PRODUCT MODEL AND SUFFIX CODES User s Manual Model MA5 Distributor (Free Range Type) IM 77J04A05-0E Network Solutions Business Division 2-9-32, Naka-cho Musashino-shi, Tokyo 80-8750 Japan Phone 8-422-52-779 Facsimile 8-422-52-6793 Please

More information

Solid-state Timer H3DS

Solid-state Timer H3DS Solid-state Timer H3DS Timers DIN Track Mounted, Standard 17.5-mm Width Timer Range A wide AC/DC power supply range (24 to 230 VAC/ 24 to 48 VDC) reduces the number of timer models kept in stock. (24 to

More information

Relays & Sockets. RF2V 2-Pole Force Guided Relays/SJ Series Relay Sockets. UL/Recogntion File No. E55996 TÜV SÜD. EU Low Voltage Directive

Relays & Sockets. RF2V 2-Pole Force Guided Relays/SJ Series Relay Sockets. UL/Recogntion File No. E55996 TÜV SÜD. EU Low Voltage Directive RFV RFV -Pole Force Guided Relays/SJ Series Relay Sockets Key features: -pole force guided relay to reduce cost and installation space. Force guided contact mechanism (EN00 Type A TÜV approved). Reinforced

More information

Twin adjuster enables delicate sensitivity setting

Twin adjuster enables delicate sensitivity setting PHOTOELECTRIC SENSORS Manually Sensitivity Set Photoelectric Sensor Amplifier-separated Diagnosis Self-diagnosis Timer Light intensity monitor Interference prevention CHX-SC SU-7/SH Twin adjuster enables

More information

No-wear isolation of potentials in terminal block design

No-wear isolation of potentials in terminal block design TERMOPTO Overview No-wear isolation of potentials in terminal block design Space saving solid-state relay with PUSH IN connection technology The TERMOPTO opto modules are characterised by a particularly

More information

NS..S contactor relays - with spring terminals AC operated

NS..S contactor relays - with spring terminals AC operated NS..S contactor relays - with spring terminals AC operated NSES 1SBC101015F00 Description NS..S contactor relays are used for switching auxiliary and control circuits. These contactor relays are designed

More information

High Accuracy Eddy Current Type Displacement Sensor GP-A SERIES. Resolution 0.04 % F.S., Linearity ±0.5 % F.S., IP67G environment resistance

High Accuracy Eddy Current Type Displacement Sensor GP-A SERIES. Resolution 0.04 % F.S., Linearity ±0.5 % F.S., IP67G environment resistance 1 High Accuracy Eddy Current Type Sensor SERIES Related Information General terms and conditions... F-3 Glossary of terms... P.1 guide... P.11~ General precautions... P.19 PHOTO PHOTO MEASURE panasonic.net/id/pidsx/global

More information

10A to 40A hockey puck type FEATURES

10A to 40A hockey puck type FEATURES (1A, A, A type) (3A, 4A type) 1A to 4A hockey puck type RELAYS FEATURES 1. Two types of terminal shape: Plugin terminal and Screw terminal (3 A, 4 A is screw terminal types only). Flat type of SSR possible

More information

MK-S (New Models) General-purpose Relays. New Super MK Relays. Models with Latching Lever Added to the Series. Features. Model Number Structure

MK-S (New Models) General-purpose Relays. New Super MK Relays. Models with Latching Lever Added to the Series. Features. Model Number Structure General-purpose Relays MK-S (New Models) CSM_MK-S_DS_E 1 New Super MK Relays. Latching Lever Added to the Series. Same mounting and internal wiring as the previous Super MK Relays Built-in mechanical indicator

More information

XR1 Rotor Earth Fault Relay. (May 2007) Manual XR1 (Revision New)

XR1 Rotor Earth Fault Relay. (May 2007) Manual XR1 (Revision New) XR1 Rotor Earth Fault Relay (May 2007) Manual XR1 (Revision New) Woodward Manual XR1 GB Woodward Governor Company reserves the right to update any portion of this publication at any time. Information provided

More information

Ordering Information. Latching Relay MMK. Available Models. Models Conforming to Auxiliary Power Relay Specifications

Ordering Information. Latching Relay MMK. Available Models. Models Conforming to Auxiliary Power Relay Specifications Latching Relay MMK CSM_MMK_DS_E_1_1 Mechanically Latching Relays Based on the MM Power Relay Low power consumption due to mechanical latch for economic operation. Relays with mixed coil specifications

More information

NA1-PK3 SERIES. Compact Size Picking Sensor. Boasts a compact, pocket lighter size enabling universal installation

NA1-PK3 SERIES. Compact Size Picking Sensor. Boasts a compact, pocket lighter size enabling universal installation 497 Compact Size Sensor NA-PK SERIES Related Information General terms and conditions... F-7 Glossary of terms... P.59~ Sensor selection guide... P.475~ General precautions...p.5 PHOTO PHOTO Conforming

More information

MasterINTERFACE 39 Series - Relay interface modules

MasterINTERFACE 39 Series - Relay interface modules Common features Space saving 6.2 mm wide Connections for 16-way jumper link Integral coil indication and protection circuit Secure retention and easy ejection by plastic clip Dual screw head (blade+cross)

More information

LOW-PROFILE SURFACE-MOUNT RELAY

LOW-PROFILE SURFACE-MOUNT RELAY TESTING LOW-PROFILE SURFACE-MOUNT RELAY TQ SMD RELAYS.6. RoHS Directive compatibility information http://www.nais-e.com/ FEATURES Low-profile: 6 mm.36 inch (Tape height: max. 6. mm.6 inch) Tape and reel

More information

Solid-state Timer H3DE

Solid-state Timer H3DE Solid-state Timer H3DE DIN-rail Mounted, Standard 22.5-mm Width Timer Range A wide AC/DC power supply range (24 to 230 VAC/DC) reduces the number of timer models kept in stock. (except for H3DE-H) 12-VDC

More information

LOW-PROFILE SURFACE-MOUNT RELAY. Characteristics. Initial breakdown voltage. Initial surge voltage. Temperature rise* 2 (at 20 C) Max.

LOW-PROFILE SURFACE-MOUNT RELAY. Characteristics. Initial breakdown voltage. Initial surge voltage. Temperature rise* 2 (at 20 C) Max. TESTING LOW-PROFILE SURFACE-MOUNT RELAY RELAYS 5.6. mm inch FEATURES Low-profile: 6 mm.36 inch in height comforming to EIA standards (Tape height: max. 6.5 mm.56 inch ) Tape and reel package is available

More information

40 mm Beam Pitch General Purpose Area Sensor NA40 SERIES

40 mm Beam Pitch General Purpose Area Sensor NA40 SERIES 9 0 mm Beam Pitch General Purpose Area Sensor SERIES Related Information General terms and conditions... F- Glossary of terms / General precautions...p.59~ / P.55~ guide... P.9~ Korea s S-mark... P.60

More information

PHOENIX CONTACT

PHOENIX CONTACT Electronic circuit breaker CLIPLINE Data sheet 102898_en_03 PHOENIX CONTACT 2010-12-17 1 Description The electronic circuit breaker can be used in applications that cover all aspects of the switched-mode

More information

RT-3 UNIT RELAY 4-POINT TERMINAL

RT-3 UNIT RELAY 4-POINT TERMINAL Slim, Space-saving, -point Unit Relay RT-3 UNIT RELAY -POINT TERMINAL [PA Relay type, PhotoMOS Power (Voltage sensitive type)] RT-3 Unit relay -point Terminal [PA relay, PhotoMOS Power (Voltage sensitive

More information

MasterINTERFACE 39 Series - Relay interface modules

MasterINTERFACE 39 Series - Relay interface modules MasterINTERFACE 39 Series - Relay interface modules Common features Space saving 6.2 mm wide Connections for 16-way jumper link Integral coil indication and protection circuit Secure retention and easy

More information

NA1-PK3 SERIES. Compact Size Picking Sensor. Boasts a compact, pocket lighter size enabling universal installation

NA1-PK3 SERIES. Compact Size Picking Sensor. Boasts a compact, pocket lighter size enabling universal installation 44 PHOTO PHOTO Compact Size Sensor NA-PK SERIES Related Information General terms and conditions... F- Glossary of terms... P.549~ guide... P.49~ General precautions...p.55~ Recognition Make sure to use

More information

22 Series Relays. Technical Data...1. Specifications...2. Model Number Structure - Relays...3. Model Number Selection

22 Series Relays. Technical Data...1. Specifications...2. Model Number Structure - Relays...3. Model Number Selection Relays 22 Technical Data...1 Specifications...2 Model Number Structure - Relays...3 Model Number Selection... 4-5 Electrical Characteristics...6 Accessories...7 Dimensions...8 Instructions...10 Safety

More information

COMPACT SIZE HIGH PRECISION TIMERS VARIOUS OUTPUT & OPERATION MODE TYPES. UL File No.: E CSA File No.: LR39291

COMPACT SIZE HIGH PRECISION TIMERS VARIOUS OUTPUT & OPERATION MODE TYPES. UL File No.: E CSA File No.: LR39291 COMP SIZE HIGH PRECISI IMERS VARIOUS OUPU & OPERAI MODE YPES SDX (one) SDX imers Features UL File No.: E22222 CSA File No.: LR3929 3 operation modes added for fuller lineup Now, operation modes include

More information

Solid-state Timer H3DS

Solid-state Timer H3DS Solid-state Timer H3DS CSM_H3DS_DS_E_2_1 DIN Track Mounted, Standard 17.5-mm Width Timer Range A wide AC/DC power supply range (24 to 230 VAC/ 24 to 48 VDC) reduces the number of timer models kept in stock.

More information

Electronic Circuit Breaker with reset input ESS20-1..

Electronic Circuit Breaker with reset input ESS20-1.. Electronic Circuit Breaker with reset input ESS0-.. Description The special device ESS0-.. is a further extension of the product line electronic circuit breakers. Type ESS0-.. has a width of only. mm and

More information

User s Manual. Model MS5 Potentiometer Converter (Free Range Type) MODEL AND SUFFIX CODES CAUTIONARY NOTES FOR SAFE USE OF THE PRODUCT

User s Manual. Model MS5 Potentiometer Converter (Free Range Type) MODEL AND SUFFIX CODES CAUTIONARY NOTES FOR SAFE USE OF THE PRODUCT User s Manual Model MS5 Potentiometer Converter (Free Range Type) IM 77J04S05-0E Network Solutions Business Division 2-9-32, Naka-cho Musashino-shi, Tokyo 80-8750 Japan Phone: +8-422-52-779 Facsimile:

More information

48 SERIES. Relay interface modules 8 A CO forcibly guided contacts relay interface modules,15.8 mm wide Type 48.12

48 SERIES. Relay interface modules 8 A CO forcibly guided contacts relay interface modules,15.8 mm wide Type 48.12 48 Relay interface modules 8 A 48 2 CO forcibly guided contacts relay interface modules,15.8 mm wide Type 48.12 2 CO 8 A s Relay with forcibly guided contacts according to EN 50205 Type 35 mm rail (EN

More information

Details on the New G2RS

Details on the New G2RS New G2RS Series The G2RS Space-saving Power Plug-in Relay has a mechanical indicator and nameplate as standard features. A relay with a lockable test button is also available. Details on the New G2RS Overview

More information

Ratchet Relay. Ordering Information. Unique Ratchet Mechanism Assures Positive Alternate Transfer/Switching Operation. G4Q-jjjj

Ratchet Relay. Ordering Information. Unique Ratchet Mechanism Assures Positive Alternate Transfer/Switching Operation. G4Q-jjjj Ratchet Relay Unique Ratchet Mechanism Assures Positive Alternate Transfer/Switching Operation Each contact in the double-pole contact mechanism performs alternate make-brake operation at each pulse input

More information

C series Product brief

C series Product brief Product brief Key applications Landlord sub-metering Object metering Meter performance Direct connected up to 0 ctive energy Low power consumption larm function Pulse output Installation Small size - 1

More information

LA-T SERIES. Fast and reliable minute granular flaw detection in winding wires. Winding Wire Granular Flaw Detector PARTICULAR USE SENSORS

LA-T SERIES. Fast and reliable minute granular flaw detection in winding wires. Winding Wire Granular Flaw Detector PARTICULAR USE SENSORS SERIES Winding Wire Granular Flaw Detector Orders accepted till September, 2003 Production to be discontinued from April, 2004 Fast and reliable minute granular flaw detection in winding wires Slim Reliable

More information

Type CP-S, CP-C & CP-A Switch mode

Type CP-S, CP-C & CP-A Switch mode Switch mode power CP-S, CP-C & CP-A Switch mode Characteristics CP-S and CP-C range Output current 5 A, 10 A and 20 A Integrated power reserve of up to 50 % 5 A and 10 A devices with pluggable connecting

More information

Cylindrical Photoelectric Sensor

Cylindrical Photoelectric Sensor SERIES Cylindrical Photoelectric Amplifier Built-in Cylindrical type easily mountable with M Conforming to EMC Directive AC supply type conforms to Low Voltage Directive, too. ( ) UL Recognition M This

More information

RU Series Universal Relays

RU Series Universal Relays Full featured universal miniature relays Designed with environment taken into consideration Two terminal styles: plug-in and PCB mount Non-polarized LED indicator available on plug-in relays No internal

More information

TeSys contactors. TeSys D contactors. IEC/EN , IEC/EN , UL 508, CSA C22.2 n 14. Protection against direct fi nger contact IP 2X

TeSys contactors. TeSys D contactors. IEC/EN , IEC/EN , UL 508, CSA C22.2 n 14. Protection against direct fi nger contact IP 2X Characteristics Contactor type LC1 D09 D18 DT20 and DT25 Environment Rated insulation voltage (Ui) Conforming to IEC 097--1, overvoltage category III, degree of pollution: 3 Conforming to UL, CSA V 00

More information

И М. 2 24VAC 50/60Hz, 24-48VDC VAC 50/60Hz

И М. 2 24VAC 50/60Hz, 24-48VDC VAC 50/60Hz 8 Pin Plug Type DIN W48 H48mm 8 Pin Plug Features Upgraded counting speed: 1cps / 3cps / kcps / 5kcps Selectable voltage input (PNP) method or no-voltage input () method Decimal point setting (fixed decimal

More information

Two outputs: contact and non-contact

Two outputs: contact and non-contact SRIS Sensor Controller Multi-functional slim sensor controller DI rail mounting Two outputs: contact and non-contact Connects two sensors -C7W Mountable on 3 mm.378 in DI rail by one-push. It reduces mounting

More information

SIPROTEC easy 7SJ46 Numerical Overcurrent Protection Relay

SIPROTEC easy 7SJ46 Numerical Overcurrent Protection Relay Overcurrent Protection / 7SJ46 SIPROTEC easy 7SJ46 Numerical Overcurrent Protection Relay Function overview Fig. /11 Description The SIPROTEC easy 7SJ46 is a numerical overcurrent protection relay which

More information

3. Contact Form A: SPST-NO

3. Contact Form A: SPST-NO 0 A Compact and high power latching relay High power switching: 0 A, 6 VAC Compact size: mm mm mm Low temperature-rise High overcurrent capability, conforming to IEC6055- UC RoHS Compliant Model Number

More information

RT-3 UNIT RELAY 4-POINT TERMINAL

RT-3 UNIT RELAY 4-POINT TERMINAL Slim, Space-saving, -point Unit Relay RT-3 UNIT RELAY -POINT TERMINAL [PA-N Relay type, PhotoMOS Power (Voltage sensitive type)] -point Terminal [PA-N relay, PhotoMOS Power (Voltage sensitive type)] Mountable

More information

2 or 4 pole changeover contact Plug-in/Faston 187

2 or 4 pole changeover contact Plug-in/Faston 187 56 Miniature power relays 56 Plug-in - Power relay, & 4 pole Flange mount option - (Faston 87, 4.8 x 0.5 mm termination) C coils & DC coils Lockable test button and mechanical flag indicator Cadmium Free

More information

PROXIMITY SENSOR TERMINOLOGY

PROXIMITY SENSOR TERMINOLOGY Never use this desk reference for installation or operation of equipment. Refer to manual for installation and operation instructions. The following descriptions refer to the European standard EN 60947-5-2.

More information

This convection-cooled series is designed for use in commercial and industrial environments in temperatures up to 50 C.

This convection-cooled series is designed for use in commercial and industrial environments in temperatures up to 50 C. RoHS Lead-Solder-Exemption Compliant Automatic 115/230 Input Voltage Selection All Outputs Fully Regulated Remote Sense, Overvoltage Protection and Overtemperature Protection Power Fail Signal Included

More information

77 Series - Modular Solid State Relay 5 A. Features. Timers and Monitoring relays

77 Series - Modular Solid State Relay 5 A. Features. Timers and Monitoring relays Series - Modular Solid State Relay 5 A 77 Features 77.01.x.xxx.8050 77.01.x.xxx.8051 5 A modular SSR, 1 NO output 17.5 mm housing 60 to 240 V AC output (with back to back SCR) 5 kv (1.2/50 μs) insulation

More information

20 AMP POWER RELAY HG RELAYS. a HG HG HG Unit weight. Ex. HG 2 AC 240 V

20 AMP POWER RELAY HG RELAYS. a HG HG HG Unit weight. Ex. HG 2 AC 240 V 20 AMP POWER RELAY HG RELAYS a 3 1.4 5 RoHS Directive compatibility information http://www.nais-e.com/ a.0 50.0 1.99 8.0 2. FEATURES Large capacity 20 A 250 V AC resistive and 1.5 kw 3 phase 220 V AC motor

More information

Model Number Structure

Model Number Structure Current Sensor CSM DS_E Solid-state, Plug-in Current Sensor Applicable to motor overcurrent protection and 3-phase AC current detection. Inverse-type, start-up lock type, and instantaneous type overcurrent

More information

DPDT MY2N-D2 MY2IN-D2 --- (DC only) 4PDT MY4N-D2 MY4IN-D PDT (bifurcated) MY4ZN-D2 MY4ZIN-D2 --- With built-in CR

DPDT MY2N-D2 MY2IN-D2 --- (DC only) 4PDT MY4N-D2 MY4IN-D PDT (bifurcated) MY4ZN-D2 MY4ZIN-D2 --- With built-in CR General-purpose Relay MY New model Versatile and Function-filled Miniature Power Relay for Sequence Control and Power Switching Applications Models with lockable test buttons now available. Many variations

More information

Electronic timer CT-MVS.23 Multifunctional with 2 c/o (SPDT) contacts

Electronic timer CT-MVS.23 Multifunctional with 2 c/o (SPDT) contacts Data sheet Electronic timer CT-MVS.23 Multifunctional with 2 c/o (SPDT) contacts The CT-MVS.23 is a multifunctional electronic timer from the CT-S range. It provides 11 timing functions and 10 time ranges.

More information

Name Number of I/O points (words used) Model Antenna style. 512 outputs max. (32 words) Magnetic Base Antenna (1) --- WD30-AT001 (See note.

Name Number of I/O points (words used) Model Antenna style. 512 outputs max. (32 words) Magnetic Base Antenna (1) --- WD30-AT001 (See note. DeviceNet Wireless Communication WD30 The DeviceNet wireless units, consisting of a DeviceNet wireless master station and a DeviceNet wireless slave station, allow wireless communication with DeviceNet

More information

SLIM COMPACT SAFETY RELAY

SLIM COMPACT SAFETY RELAY SLIM COMPACT SAFETY RELAY SF-RELAYS Slim type Max. 24.945 Max. 24.945 Max. 4.575 Max. 5.969 Max. 3.52 Max. 3.52 mm inch FEATURES Forcibly guide contact structure (EN525 ClassA TÜV recognized) Slim profile

More information

RE11RMMU time delay relay 10 functions - 1 s..100 h V AC - 1 OC

RE11RMMU time delay relay 10 functions - 1 s..100 h V AC - 1 OC Product data sheet Characteristics RE11RMMU time delay relay 10 functions - 1 s..100 h - 24..240 V AC - 1 OC Complementary Contacts material Width pitch dimension Control type Voltage range Connections

More information

Easy to replace. A pigtailed type sensor with connector (CY- -J), which is easy to replace, is also available. Environment resistant

Easy to replace. A pigtailed type sensor with connector (CY- -J), which is easy to replace, is also available. Environment resistant EQ- VF NX PM PM MS-AJ RT-6 PX- PHOTOELECTRIC SENSORS Mounting Stand SERIES Cylindrical Photoelectric Test input PNP output Light intensity type available monitor M This sensor has an M size for convenient

More information

Solid State Relays 1-Phase, Zero Cross or Instant On Switching 25 AAC, 230 VAC with LED and Built-in Transil Types RF1A, RF1B

Solid State Relays 1-Phase, Zero Cross or Instant On Switching 25 AAC, 230 VAC with LED and Built-in Transil Types RF1A, RF1B Solid State Relays 1-Phase, Zero Cross or Instant On Switching 25 AAC, 230 VAC with LED and Built-in Transil Types RF1A, RF1B AC switching Solid State Relay Switching through back to back thyristors Long

More information

Instantaneous Overcurrent Relay

Instantaneous Overcurrent Relay Midos Type MCRI Instantaneous Overcurrent Relay Features High speed operation Not slowed by dc transients Settings readily adjustable on relay front plate Two phase and earth fault relay Figure 1: Type

More information

Remote Sensor Amplifier Terminal

Remote Sensor Amplifier Terminal 9 Remote Sensor Amplifier Terminal Plug-in Sensor Amplifiers with Direct CompoBus/S Terminal Connections 1 SRT1 models support only high-speed communications systems 1 4-point terminals expand to 8 points

More information

3.5 mm contact pin pitch 1 Pole 12 A PCB direct or via socket

3.5 mm contact pin pitch 1 Pole 12 A PCB direct or via socket 8-12 - 16 A Features 41.31 41.52 41.61 1 & 2 Pole - Low profile (15.7 mm height) 41.31-1 Pole 12 A (3.5 mm pin pitch) 41.52-2 Pole 8 A (5 mm pin pitch) 41.61-1 Pole 16 A (5 mm pin pitch) PCB mount - direct

More information

User s Manual. Model MXS Universal Computing Unit (1-input, Isolated 2-output Type) MODEL AND SUFFIX CODES

User s Manual. Model MXS Universal Computing Unit (1-input, Isolated 2-output Type) MODEL AND SUFFIX CODES User s Manual Model MXS Universal Computing Unit (1-input, Isolated 2-output Type) IM 77J04X11-01E Network Solutions Business Division 2-9-32, Naka-cho Musashino-shi, Tokyo 180-8750 Japan Phone: 81-422-52-7179

More information

Small-sized, plastic type, push-pull lock connectors

Small-sized, plastic type, push-pull lock connectors Small-sized, plastic type, push-pull lock connectors RP17 Series Product Specifications Ratings Rated current Rated voltage Features 1. Superior mating operability Secure mating and easy unmating is achieved

More information

.093 [2.36] Commercial Pin and Socket Connectors

.093 [2.36] Commercial Pin and Socket Connectors .09 [.] Commercial Product Facts Polarized Cavity identification Low contact-mating force Dual locking lances Detent and positive locking Contacts available in brass and phosphor bronze with tin and gold

More information