ET W White Datasheet

Transcription

1 PLCC Series ET W White Datasheet Features : High luminous Intensity and high efficiency Based on Blue : InGaN technology Wide viewing angle : 12 Excellent performance and visibility Suitable for all SMT assembly methods IR reflow process compatible Environmental friendly; RoHS compliance Typical Applications : Signal and Symbol Luminaire Indoor Displays Backlighting (illuminated advertising, general lighting) Interior Automotive Lighting Copyright 213 Edison Opto Corporation. All right reserved. The information in this document is subject to change without notice. version : 2 1

2 Table of Contents General Information...3 Absolute Maximum Ratings...4 Characteristics...4 Luminous Flux Characteristic...5 Voltage Bin Structure...5 Mechanical Dimensions...6 Characteristic Curves...7 Reflow Profile...9 Product Packaging Information...1 Revision History...11 About Edison Opto...11 Copyright 213 Edison Opto Corporation. All right reserved. The information in this document is subject to change without notice. version : 2 2

3 General Information Introduction Ultra high luminous efficacy, combined with the flexibility in design due to its slim and miniature size, PLCC LED Series are optimized to be used as lighting for building. Ordering Code Format 2 T xx xx xx xx xxx X1 X2 X3-X4 X5-X6 X7-X8 X9-X1 X11-X13 X14-X16 X1 X2 X3-X4 X5-X6 X7-X8 Type Component Series Wattage Color 2 Emitter T PLCC W CW X1.1W NW Neutral White 4 55 X2.2W WW X5.5W RX Red Y6.6W TX True Green BX Blue AX YX OX M1 Amber Yellow Red Orange RGB X9-X1 X11-X13 X14-X16 Internal code PCB Board Serial Number Copyright 213 Edison Opto Corporation. All right reserved. The information in this document is subject to change without notice. version : 2 3

4 Absolute Maximum Ratings Absolute maximum ratings (T a =25 o C) Notes: 1. The values are based on 1-die performance. 2.* I Pulse condition: pulse width.1msec and duty 1/1. Parameter Symbol Value Units DC Forward Current I F 3 ma Pulse Forward Current (tp 1μs, Duty cycle=.25) I pulse 1 ma Reverse Voltage V R 5 V LED Junction Temperature T J 125 C Operating Temperature - -4 ~ +85 C Storage Temperature - -4 ~ +125 C ESD Sensitivity V B 2, V Reflow Soldering : 255~26 o C/1~3sec Soldering Temperature T s Manual Soldering : 35 o C/3sec Characteristics Parameter Symbol Value Units Viewing Angle (Typ.) 2Θ 1/2 12 Degree Forward voltage (Typ.) V F 3.2 V Thermal resistance - 18 CW-7 CRI (Typ.) - NW-75 WW-8 CCT/Wavelength () 5-1 (Neutral White) () Note: 2θ 1/2 is the off-axis angle where the luminous intensity is half of the axial luminous intensity. o C/W - K Copyright 213 Edison Opto Corporation. All right reserved. The information in this document is subject to change without notice. version : 2 4

5 Luminous Flux Characteristic Luminous Flux Characteristics, I F =2mA and T J =25 C Color Group Min Luminous Max Luminous Flux(lm) Flux(lm) Neutral White Warm White Typ. Luminous Intensity (mcd) Forward Current(mA) Order Code 2,6 2 2T3Y6CW61 2,5 2 2T3Y6NW11 2,1 2 2T3Y6WW11 Note: The luminous flux performance is guaranteed within published operating conditions. Edison Opto maintains a tolerance of ±1% on flux measurements. Voltage Bin Structure Group Min Voltage (V) Max Voltage (V) VA VB VC VA VB VC VA VB Note: Forward voltage measurement allowance is ±.1V. Copyright 213 Edison Opto Corporation. All right reserved. The information in this document is subject to change without notice. version : 2 5

6 Mechanical Dimensions Emitter Type Dimension 2 1 Polarity mark Housing Leadframe Unit: mm Tolerance: ±.2mm Circuit Solder Pad Polarity Notes: 1. All dimensions are measured in mm. 2. Tolerance : ±.2 mm Copyright 213 Edison Opto Corporation. All right reserved. The information in this document is subject to change without notice. version : 2 6

7 Characteristic Curves Spectrum Radiation Diagram Normalized Relative Intensity(%) Wavelength(nm) Color Spectrum at typical CCT for PLCC 3528series Luminous Flux vs. Temperature EDEW-xLS6-xR EDEH-xLS6-xR Neutral White EDEX-xLS6-xR Riadiation Angle Beam pattern diagram for PLCC 3528 series Forward Voltage vs. Forward Current Normalized Relative Intensity Ambient temperature( o C) Ambient temperature vs. Relative intensity for PLCC 3528 series Forward current(ma) Forward Voltage V F (V) Forward current vs. forward voltage for PLCC 3528 series Luminous Flux vs. Forward Current Normalized Relative Intensity Normalized Relative Intensity o -6 o -3 o Forward current (ma) Forward current vs. relative intensity for PLCC 3528 series Copyright 213 Edison Opto Corporation. All right reserved. The information in this document is subject to change without notice. version : 2 7

8 Luminous Intensity vs. Forward Current CCT vs. Forward Current Normalized Luminous Intensity Natural Neutral White Forward Current (ma) Luminous Intensity vs. Forward Current for PLCC 3528 series CCT Natural Neutral White Forward Current (ma) CCT vs. Forward Current for PLCC 3528 series Forward voltage vs. Junction temperature Luminous Flux vs. Junction temperature Normalized Forward Voltage Junction Temperature ( o C) Forward voltage vs. Junction temperature for PLCC 3528 series Normalized Luminous Flux Natural Neutral White Junction Temperature ( o C) Luminous Flux vs. Junction temperature for PLCC 3528 series CCT vs. Junction temperature Radiation Power vs. Wavelength CCT Natural Neutral White Junction Temperature ( o C) CCT vs. Junction temperature for PLCC 3528 series Normalized Radiation Power Natural Neutral White Wavalength(nm) Radiation power vs. Wavelength for PLCC 3528 series Copyright 213 Edison Opto Corporation. All right reserved. The information in this document is subject to change without notice. version : 2 8

9 Reflow Profile The following reflow profile is from IPC/JEDEC J-STD-2D which provided here for reference. Reflow Profiles Classification Reflow Profiles Profile Feature Pb-Free Assembly Preheat & Soak Temperature min (Tsmin) Temperature max (Tsmax) Time (Tsmin to Tsmax) (ts) Average ramp-up rate (Tsmax to Tp) Liquidous temperature (TL) Time at liquidous (tl) 15 C 2 C 6-12 seconds 3 C/second max. 217 C 6-15 seconds Peak package body temperature (Tp)* 255 C ~26 C * Classification temperature (Tc) 26 C Time (tp)** within 5 C of the specified classification temperature (Tc) Average ramp-down rate (Tp to Tsmax) Time 25 o C to peak temperature 3** seconds 6 C/second max. 8 minutes max. Notes: 1. * Tolerance for peak profile temperature (Tp) is defined as a supplier minimum and a user maximum. 2. ** Tolerance for time at peak profile temperature (tp) is defined as a supplier minimum and a user maximum. Copyright 213 Edison Opto Corporation. All right reserved. The information in this document is subject to change without notice. version : 2 9

10 Product Packaging Information (-) (+) Seal Label Reel Taping reel dimensions Label Moisture absorbent material Package & label Moisture proof bag Item Quantity Total Dimensions(mm) Reel 2,pcs 2,pcs R=178 Box 5 Reels 1,pcs 24*235*67 Carton 5 boxes 5,pcs 353*254*256 Starting with 5pcs empty,and 5pcs empty at the last Copyright 213 Edison Opto Corporation. All right reserved. The information in this document is subject to change without notice. version : 2 1

11 Revision History Versions Description Release Date 1 Establish order code information 212/11/28 2 Add the Characteristic Curve 213/3/12 About Edison Opto Edison Opto is a leading manufacturer of high power LED and a solution provider experienced in LDMS. LDMS is an integrated program derived from the four essential technologies in LED lighting applications- Thermal Management, Electrical Scheme, Mechanical Refinement, Optical Optimization, to provide customer with various LED components and modules. More Information about the company and our products can be found at Copyright 213 Edison Opto. All rights reserved. No part of publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photo copy, recording or any other information storage and retrieval system, without prior permission in writing from the publisher. The information in this publication are subject to change without notice. For general assistance please contact: service@edison-opto.com.tw For technical assistance please contact: LED.Detective@edison-opto.com.tw Copyright 213 Edison Opto Corporation. All right reserved. The information in this document is subject to change without notice. version : 2 11