EM-CAN. Field-bus Stepper Drive. Leadshine Technology Co., Ltd. Website:
|
|
- Andrea Long
- 6 years ago
- Views:
Transcription
1 Reliable Motion Control Products EM-CAN Field-bus Stepper Drive Leadshine Technology Co., Ltd. Website: Service: Tel: (for Asia, Australia, Africa region) -7-- (for Europe region) -7-- (for America region) Sales Hot Line: Tel: (for Asia, Australia, Africa region) (for Europe region) (for America region) 7 by Leadshine Technology. All Rights Reserved Support CiA / communication protocols Maximum communication rate of Mbps Simplicity & High reliability Excellent performance Matched with most of master brands
2 EM-CAN Series EM-CAN is a new series of digital stepper drives with standard protocol. The new products have excellent performance include enhanced reliability, super-low stepper noise, anti-resonance, low-speed ripple smoothing. Adding allows the drives not only to support operating modes including Profile Position (PP), Profile Velocity (PV), Homing (HM), etc, but also to build a networks with 7 nodes maximumly. Therefore, Leadshine EM-CAN series is an ideal choice for field-bus applications, which need high reliability and good performance. EM-CAN Series Field-bus System Connection Topology Controller/ PLC EM-CAN Enhanced Reliability Excellent Performance Standard EM-CAN Series Advantages No. stepper products manufacturer in terms of shipment volume globally nowadays. Fast communication rate Long communication distance Lower cost Strong anti-interference ability High Reliability: 9-years continuous improvement & -years ISO system implementation. Widely matching master: Matched with most of mainstream master brands, such as Leadshine, Schneider, Delta, etc. Excellent performance: Adopt Leadshine mature DSP control technology which enables super-low noise, anti-resonance, low-speed ripple smoothing, etc. Contents Customer Benefits Significantly reduced equipment cost: % lower cost to replace field-bus servo when the required speed of application is under RPM. Significantly reduced potential cost: Lower labor cost, lower cable cost and maintenance cost.. EM-CAN Series Overview. EM-CAN Series Drives. Matching Stepper Motor. Cables and Power Supplies. Ordering Information Real-time data transfer: Online monitoring of the status of motor and drive.
3 . Overview Specifications General Specifications EM-CAN Series Overview Item link layer protocol Application layer protocol CAN-ID Type Communication Rate Sub-protocol length Support service PDO transmission modes PDO number Control modes Input Power Bus Address Setting Digital Input Digital Output Alarm Output CAN Field-bus protocol CAN.A Mbit/s, Kbit/s, Kbit/s, Kbit/s, Kbit/s, Kbit/s, Kbit/s DS V.: application layer protocol and communication protocol DSP V.: Device profile for drives and motion control - bit NMT: Network Management Service SDO: Service Data Objects PDO: Process Data Object Devices Monitor: Node protection and heartbeat message SYNC: Synchronous generator and synchronous detection, applied to the PDO transmission EMCY: Emergency object Services Time trigger, event trigger, synchronization trigger TPDOs, RPDOs PP (Profile Position) PV (Profile Velocity) HM (Homing) - VDC or - VAC DIP switch or PC software Description Max input signals, include single - ended / differential connections, maximum frequency KHz, -V input voltage Max output signal, optically isolated, maximum /ma Over voltage, over current, etc.. Features. Low-speed Ripple Smoothing Electronic damping for major resonance frequencies for stepper motors at low speed range, eliminating undesirable motor speed oscillation and delivering unique level of smoothness.. Command Signal Smoothing Command signal smoothing can soften the effect of sudden changes in velocity and direction, thus delivering smoother performance and improving system lifetime.. Alarm Output Using alarm indicator and output signal feedback failure such as over- voltage or over-current timely to ensure the safety and reliability of equipment operation. Speed Ripple RPS Speed Ripple RPS Speed Ripple RPS Speed # Resonance Frequency, around RPS t # Resonance Frequency, around RPS t # Resonance Frequency, around RPS t Before Smoothing After Smoothing Time
4 EM-CAN Series Drives. Part Number EM Series Name: EM - EM Series DC or AC Power Input: Blank: DC Input A: AC or DC Input Optional Opera ng Voltage:. Electrical Specifications s Operating Voltage Output Current Matched Motor : Max V : Max V - CAN EM-CAN - VDC. -.A (RMS.A),,,7 Max Output Current: :.A Custom s Field-bus Stepper Drives EM-CAN - VDC. -.A (RMS A) 7, EM-CAN - VDC. -.A (RMS A), CAN: EM7-CAN - VDC. - 7.A (RMS A),, EM-CAN - VDC. -.A (RMS.A) EMA-CAN - VDC or - VDC. -.A (RMS.A) DC Power Input s EM-CAN EM-CAN EM-CAN EM7-CAN EM-CAN Operating Voltage (VDC) AC Power Input s EMA-CAN VAC VDC,,, 7 7 7VAC 9VDC VAC VDC. Typical Configuration Input signals communication output Node address and communication rate setting Motor Output Peak Output Current communication input Output signals Power Input Control Signal Current (ma) Min Typical Max Min Max Min Max Operating Voltage (VDC) Peak Output Current Control Signal Current (ma) Min Typical Max Min Max Min Max Controller/PLC/Control Card 电源 Power Supply Control Signal Voltage (VDC) Control Signal Voltage (VDC) Note: The minimum output current is default value, can be set to.a via PC software; No additional resistance for V, V, V normally, while recommended to connect KΩ or KΩ resistance when using V or V in strong interference condition.
5 . -Ф.. Connector Description EM-CAN Connector Description. Mechanical Specifications EM///7-CAN Power Input - Vdc - Vdc - Vdc IN+ IN- IN+ IN- IN+ IN- ALM+ ALM- +Vdc GND EM-CAN 9 EM-CAN A+ A - B+ B Other Drive RJ Connector: CAN connector uses binary RJ terminals with shielding (standard RJspecifications as below) RJ Picture Unit: mm inch=.mm PIN Name Description ~ 7 CAN_H CAN_L CAN_GND NC NC --- NC. Other Drive CAN signal high CAN signal low CAN signal ground Reserved 9 EMA-CAN. 97. Part Number. s Motor Size 7 7 CM ( A) Motor Frame Size Motor Phase Blank: phase motor : phase motor Matching Stepper Motor CM Series SPS Switching Power Supply : 7 motor 7: motor D7: motor with larger body : motor : motor For // motor: Divide the value by :.N.m For 7/// motor: Divide the value by :.N.m CM CM CM CM CM CM CM CM CM CM CM Standard Customized Specification SZ: Dobule shaft motor BZ: Brake motor FS: Waterproof motor Motor Blank: Standard rate current A : Rate current A 7 Customized model Matched Drive EM-CAN EM-CAN EM-CAN EM-CAN EM-CAN EM-CAN EM-CAN EM-CAN/EM-CAN EM-CAN/EM-CAN EM-CAN EM-CAN 7
6 Motor Size 7CM 7CM 7CM 7CM-A 7CM 7CM-A D7CM-A D7CM-A D7CM D7CM CMX CMX CM CM CM CM CM Motor Specifications Unit: mm -. Φ 7 CM CM CM CM inch=.mm 9 7 UL7 AWG #.... Length Φ A- Green Matched Drive EM-CAN/EM-CAN EM-CAN/EM-CAN EM-CAN EM-CAN/EM-CAN EM-CAN EM-CAN/EM-CAN EM-CAN/EM-CAN EM-CAN/EM-CAN EM-CAN/EM7-CAN EM-CAN/EM7-CAN EM-CAN/EM7-CAN EM-CAN/EM7-CAN EM7-CAN/EM-CAN/EMA-CAN EM7-CAN/EM-CAN/EMA-CAN EM7-CAN/EM-CAN/EMA-CAN EM7-CAN/EM-CAN/EMA-CAN EM7-CAN/EM-CAN/EMA-CAN B+ Red...7. ΦD -. ΦD -. 7CM 7CM 7CM 7CM 7CM 7CM 7CM 7CM D7CM D7CM D7CM D7CM 7 L (mm) 7 (Continious). 7 UL AWG # 7 UL AWG # D (mm).... Min.+. - E (mm) / / D (mm) E (mm) L (mm) A- Green.7. A- Green B+ Red B+ Red 9
7 -. Φ7 Φ -. CMX CMX CM CM CM CM -. ΦD CM CM CM CM 7 UL AWG # 9 9 L Φ Φ -Φ. E D (mm) E (mm) L (mm) YGZF X.² A- Green A- Red B+ Red B+Yellow Electrical Specifica ons Cables and Power Supply. Power Supplies SPS Series Power Supplies Features Specially Designed Power Suppliers for Stepper and Servo Controls Compact Size, Light in Weight Wide Input Voltage Range, VAC ± % or VAC ± % Shortcut, Over-current, Over-voltage, Low-voltage Protec ons Big Power with High Efficiency Easy to Use Output Voltage (VDC) Mechanical Specifications Con nuous Current Input Voltage Matching Drives Dimensions Weight (Kg) Note: // stepper motors are coming soon Contact Leadshine for special type motor such as brake, double shaft, waterproof, etc. SPS(V.) SPS(V.)/SPS(V.)/SPS(V.) H=mm SPS(V.) H=mm SPS(V.) SPS(V.) SPS(V.) SPS(V.) SPS(V.)..7 Peak Current.9. VAC± % or VAC ± % CS-D/ CS-D CS-D CS-D/CS-D CS-D/CS-D CS-D/CS-D 99**mm **mm **mm **mm **mm H.....
8 . Cables Cables for Communication Specification Length (L) Tolerance (d) CABLE-TXM-BUS RoHS CABLE-TXM-BUS RoHS CABLE-TXM-BUS RoHS CABLE-TXM-BUS RoHS CABLE-TXM-BUS RoHS CABLE-TXM-BUS RoHS CABLE-TXM-BUS RoHS CABLE-TXM-BUS RoHS CABLE-TXM-BUS RoHS CABLE-TX7M-BUS RoHS CABLE-TXM-BUS RoHS CABLE-TXM-BUS RoHS CABLE-TXM-BUS RoHS mm mm mm mm mm mm mm mm mm 7mm mm mm mm Terminate Resistance Lable Picture RJ Terminate Resistance Note: Please connect a terminate resistance in the end node Drive EM-CAN EM-CAN EM-CAN EM7-CAN EM-CAN EMA-CAN Accessories Ordering Information Input Power Voltage - (VDC) - (VDC) - (VDC) - (VDC) - (VDC) Output Peak Current (VAC). -. Cables of communication Terminate resistance Matched Motor CM CM CM CM CM CM CM CM CM CM CM 7CM 7CM 7CM 7CM-A 7CM 7CM-A D7CM-A D7CM-A D7CM D7CM CMX CMX CM CM CM CM CM CM CM CM CM CM
maxon document number:
maxon document number: 791272-04 1 Table of contents... 2 2 Table of figures... 3 3 Introduction... 4 4 How to use this guide... 4 5 Safety Instructions... 5 6 Performance Data... 6 6.1 Motor data... 6
More informationIntegrated Easy Servo
ies 1706 Integrated Easy Servo Motor + Drive + Encoder, 18 32VDC, NEMA17, 0.6Nm Features Easy servo control technology to combine advantages of open loop stepper systems and brushless servo systems Closed
More informationHBS Series Hybrid Servos
Hybrid Servos 46 Hybrid Servos From the stepper and servo, but surpass them in many applications! HBS Series Hybrid Servos Closed-loop, eliminates loss of synchronization The HBS series use an encoder
More informationies-2309 Integrated Easy Servo
Datasheet of the integrated easy servo motor ies-09 ies-09 Integrated Easy Servo Motor + Drive + Encoder, 0-0VDC, NEMA, 0.9Nm Features Easy servo control technology to combine advantages of open-loop stepper
More informationApplied Motion Products CANopen Manual
Applied Motion Products CANopen Manual APPLIED MOTION PRODUCTS, INC. 920-0025 Rev. F (This page intentionally left blank) 920-0025 Rev. F 2 Introduction This manual describes Applied Motion Products CANopen
More informationLSM&DSD Brushless Servo Drive Package
LSM&DSD Brushless Servo Drive Package Descriptions LSM&DSD brushless servo drive package consists of one of LSM60 brushless servo motors and DSD806 brushless servo drive, offering high performance with
More informationIntegrated Servo Motor UCS57
Integrated Servo Motor Introduction is a new generation of high performance digital integrated servo drive motor, which is a series of low voltage AC servo products integrated with AC servo motor and drive
More informationCL86T. 24~80VDC, 8.2A Peak, Closed-loop, No Tuning. Descriptions. Closed-loop. Stepper. Applications. Datasheet of the Closed-loop Stepper CL86T
CL86T Closed-loop Stepper 24~80VDC, 8.2A Peak, Closed-loop, No Tuning Closed-loop, eliminates loss of synchronization Broader operating range higher torque and higher speed Reduced motor heating and more
More informationAG FB-CAN. Absolute encoder viva CAN. Product Manual E-V0204.doc
AG FB-CAN Absolute encoder viva CAN Product Manual 04-02-03-E-V0204.doc Further descriptions, that relate to this document: UL: 07-02-08-01 631- Product - manual UL: 07-01-05-06 635- Product - manual UL:
More informationAC Servo Amplifier SANMOTION R Series ADVANCED MODEL with Built-in EtherCAT Interface
New Products Introduction AC Servo Amplifier SANMOTION R Series ADVANCED MODEL with Built-in EtherCAT Interface Tsuyoshi Kobayashi Naohiro Itoh Noriaki Kasuga Daisuke Naitoh Keisuke Ishizaki Yasuo Nakamura
More informationDatasheet of the Easy Servo Motor ES-MH Series
Datasheet of the Easy Servo Motor ES-MH Series High Voltage Stepper Motor with Encoder, 8-20 Nm Version 1.3 http://www.leadshine.com Descriptions Leadshine s ES-MH series easy servo motors, or stepping
More informationES86 Series Closed-loop Stepper Drive + Motor System (Drive+ Motor/Encoder)
ES86 Series Closed-loop Stepper Drive + Motor System (Drive+ Motor/Encoder) Traditional stepper motor drive systems operate open loop providing position control without feedback. However, because of this,
More informationES86 Series Closed-loop Stepper Drive + Motor System (Drive+ Motor/Encoder)
ES86 Series Closed-loop Stepper Drive + Motor System (Drive+ Motor/Encoder) Traditional stepper motor drive systems operate open loop providing position control without feedback. However, because of this,
More informationDatasheet of the Easy Servo Motor ES-M Series
Datasheet of the Easy Servo Motor ES-M Series Stepper Motor with Encoder, 1-8 Nm Version 0.1.1 http://www.leadshine.com Descriptions Leadshine s ES-M series easy servo motors, or stepper motors with encoders,
More informationDatasheet of the Easy Servo Drive ES-D VDC, 8.0A Peak, Closed-loop, No Tuning
Datasheet of the Easy Servo Drive ES-D508 0-45VDC, 8.0A Peak, Closed-loop, No Tuning Version 1. http://www.leadshine.com Features Step and direction control Closed position loop for no loss of movement
More informationLXM32AD18M2 motion servo drive - Lexium 32 - single phase supply voltage 115/230V - 0.5/1kW
Product data sheet Characteristics LXM32AD18M2 motion servo drive - Lexium 32 - single phase supply voltage 115/230V - 0.5/1kW Main Range of product Lexium 32 Product or component type Device short name
More informationFeatures. Anti-Resonance. Microstep Emulation. Torque Ripple Smoothing. Command Signal Smoothing. Dynamic Current Control. Self Test & Auto Setup
STM Integrated Steppers Drive Motor Controller The STM is an integrated Drive+Motor+Controller, fusing step motor and drive technologies into a single device, offering savings on space, wiring and cost
More informationEMS THOMAS WÜNSCHE. CANwatch. CAN Physical Layer Analyser. User Manual. Documentation for CANwatch version 1.2. Documentation date: November 2004.
Documentation for version 1.2. Documentation date: November 2004. No part of this document or the software described herein may be reproduced in any form without prior written agreement from EMS Dr. Thomas
More informationGCAN-208-1/-2. Fiber-CAN converter. User Manual
GCAN-208-1/-2 Fiber-CAN converter User Manual Contents 1 Introduction... 3 1.1 Overview... 3 1.2 Properties at a glance... 3 2 Interface specification... 4 3 Connection and use... 6 3.1 CAN-Bus configuration...
More informationLXM32AD72N4 motion servo drive - Lexium 32 - three-phase supply voltage 208/480V kw
Product data sheet Characteristics LXM32AD72N4 motion servo drive - Lexium 32 - three-phase supply voltage 208/480V - 0.4 kw Main Range of product Lexium 32 Product or component type Device short name
More informationNo Gain Tuning. Hunting. Closed Loop System
2 No Gain Tuning Conventional servo systems, to ensure machine performance, smoothness, positional error and low servo noise, require the adjustment of its servo s gains as an initial crucial step. Even
More informationServo Motor Driver. 4. Specifications: Digital Driver Model ACS806. Digital Technology, max. 80 V DC / 6.0 A, W. 1. Product Description:
Digital Driver Model ACS806 Digital Technology, max. 80 V DC / 6.0 A, 50 400 W 1. Product Description: Leadshine's fully digital AC servo drive ACS806 is developed with 32-bit DSP based on advanced control
More informationSoftware Operational Manual
Software Operational Manual for Easy Servo Drives ES-D508/808/1008 www.leadshine.com SM-ES-R20121030 ii Leadshine reserves the right to make changes without further notice to any products herein to improve
More information30-80V, 8.2A Peak, No Tuning, Nulls loss of Synchronization
2-phase Hybrid Servo Drive 30-80V, 8.2A Peak, No Tuning, Nulls loss of Synchronization Closed-loop, eliminates loss of synchronization Broader operating range higher torque and higher speed Reduced motor
More informationES86 Series Closed-loop Stepper Drive + Motor System (ES-D808 Drive+ Motor/Encoder)
ES86 Series Closed-loop Stepper Drive + Motor System (ES-D808 Drive+ Motor/Encoder) Traditional stepper motor drive systems operate open loop providing position control without feedback. However, because
More informationOutputs U8 I1. Protection class IP64 (IP67) WB25
Analog Output Position sensor with measuring tape class IP64 (IP67) Measurement range 0... 12000 mm to 0... 25000 mm Steel measuring tape Analog output Redundant version on request Specifications Outputs
More informationOutputs U8 I1. Protection class IP64 (IP67) WB25KT
Analog or Digital Output Position sensor with measuring tape class IP64 (IP67) Measurement range 0... 236.2 in. to 0... 984.3 in. 0... 6000 mm to 0... 25000 mm Steel measuring tape Analog output Redundant
More informationBrushed DC Motor Control. Module with CAN (MDL-BDC24)
Stellaris Brushed DC Motor Control Module with CAN (MDL-BDC24) Ordering Information Product No. MDL-BDC24 RDK-BDC24 Description Stellaris Brushed DC Motor Control Module with CAN (MDL-BDC24) for Single-Unit
More informationXC4e PWM Digital Drive
PWM Digital Drive HyperWire fiber-optic interface Up to 30 A peak output current Integral power supply Amplifiers/Drives Drive brush, brushless, voice coil, or stepper motors Safe torque off (STO) safety
More informationDYN2 Series D M M AC SERVO DRIVE LOW VOLTAGE TYPE A - GENERAL PURPOSE PULSE/ANALOG. Dynamic Motor Motion Technology Corporation
D M M Dynamic Motor Motion Technology Corporation AC SERVO DRIVE DYN2 Series LOW VOLTAGE TYPE A - GENERAL PURPOSE PULSE/ANALOG Published in Canada Low Voltage AC Servo Technique for the Future 2 FEATURES
More informationMagnetic absolute multi-turn hollow shaft encoder BMMH MAGRES SSI
Magnetic absolute multi-turn hollow shaft encoder BMMH MAGRES SSI features robust multi-turn encoder up to - 2 bit single-turn resolution - 3 bit multi-turn resolution miniature housing zero point programmable
More informationCANopen Programmer s Manual Part Number Version 1.0 October All rights reserved
Part Number 95-00271-000 Version 1.0 October 2002 2002 All rights reserved Table Of Contents TABLE OF CONTENTS About This Manual... iii Overview and Scope... iii Related Documentation... iii Document Validity
More informationRanges >500 mm: L10 = ±0.10 % f.s. L02 = ±0.02 % f.s. Ranges 500 mm: L10 = ±0.5 mm L02MM = ±0.2 mm Repeatability ±3 µm
Flat Profile Housing with Analog POSICHRON position sensor Only 12 mm height and 36 mm width Protection class IP64 Measurement range 0... 100 to 0... 5750 mm Absolute position measurement Ultra flat profile
More informationTemposonics. Magnetostrictive Linear Position Sensors. EP2 CANopen Data Sheet
Temposonics Magnetostrictive Linear Position Sensors EP2 CANopen Optimal price- / performance ratio Position measurement with more than one magnet Smooth & compact Temposonics EP2 CANopen MEASURING TECHNOLOGY
More information2HSS858H Low Voltage Digital Stepper Servo Drive Manual
2HSS858H Low Voltage Digital Stepper Servo Drive anual Email:info@jmc-motion.com Address: Floor2, Building A, Hongwei Industrial Zone No.6, Liuxian 3rd Road, Shenzhen. China Shenzhen Just otion Control
More informationPOSICHRON position sensor in a stainless steel pressure tube. Protection class IP68/IP69K
Round Profile Housing with Analog POSICHRON position sensor in a stainless steel pressure tube Protection class IP68/IP69K Underwater applications, permanent pressure-proof up to 15 bar Measurement range
More informationCiA Draft Standard Proposal 402. CANopen. Device Profile Drives and Motion Control. This draft standard proposal is not recommended for implementation
CiA Draft Standard Proposal 402 CANopen Device Profile Drives and Motion Control This draft standard proposal is not recommended for implementation Version 2.0 Date: 26. July 2002 CAN in Automation e.v.
More informationmaxon motor maxon motor control 4-Q-EC Servoamplifier DES 70/10 Order number
control 4-Q-EC Servoamplifier DES 70/10 Order number 228597 April 2006 Edition The DES (Digital EC Servoamplifier) is a very efficient digital servoamplifier with sinusoidal current commutation for perfectly
More informationLogosol Intelligent Hall-Servo Drive LS-173U Doc # / Rev. C, 02/12/2008
Features Specially designed for control of brushless motors without encoder Hall-Servo and Encoder-Servo control modes Motors supported: - Brushless 60/120 commutated (AC) - Brush-commutated (DC) Up to
More informationXC4 PWM Digital Drive
XC4 PWM Digital Drive HyperWire fiber-optic interface Up to 30 A peak output current Integral power supply Drive brush, brushless, voice coil, or stepper motors Safe torque off (STO) safety circuit Drive
More informationXC4e PWM Digital Drive
XC4e PWM Digital Drive HyperWire fiber-optic interface Up to 30 A peak output current Integral power supply Drive brush, brushless, voice coil, or stepper motors Safe torque off (STO) safety circuit Drive
More informationDatasheet of the Easy Servo Drive ES-D VAC or VDC, 8.2A Peak, Close-loop, No Tuning. Version
Datasheet of the Easy Servo Drive ES-D1008 0-70 V or 30-100VDC, 8.A Peak, Close-loop, No Tuning Version 0.1.0 http://www.leadshine.com Features Step and direction control Closed position loop for no loss
More informationARS 2000 series Universal servo positioning controller
ARS 2000 series Universal servo positioning controller Extension modules Software tools Universal in applications Manufacturer- and system-independent (motor, controller, fieldbus) Automatic identification
More informationHarmonica Digital Servo Drive Technical Specifications
Harmonica Digital Servo Drive Technical Specifications March 2004 Notice This guide is delivered subject to the following conditions and restrictions: This guide contains proprietary information belonging
More informationDM9082 Closed Loop Stepping System
DM9082 Closed Loop Stepping System 1. Introduction Descriptions DM9082 is a new generation hybrid servo driver, it uses the 32-bit DSP processor, the internal integrates the technology of the anti-resonance,
More informationAnalog Servo Drive. Continuous Current. Features
Description Power Range The PWM servo drive is designed to drive three phase brushless motors with sine wave current at a high switching frequency. The drive requires two sinusoidal command signals with
More informationManual. ihss57-xx. Integrate Stepper Servo Motor.
ihss57-xx Integrate Stepper Servo Motor Manual Shenzhen Just Motion Control Electro-mechanics Co., Ltd TEL:+86-0755-26509689 FAX:+86-0755-26509289 www.jmc-motion.com Email:jmk@jmc-motion.com Address: Floor2,
More informationMHAD 50 - HDmag. Features
Magnetic sensing, hollow shaft 30 mm MHAD 50 with cable Features Absolute encoder with magnetic sensing and without bearings Absolute resolution max. 16 bit singleturn Additional incremental signals Robust
More informationU8 I1. Linearity ±0.10 % f. s. (standard); optional ±0.05 % WB61
Analog Output Position sensor with measuring tape Measurement range up to 4000 mm class IP67/IP69K Stainless steel measuring tape Analog output Specifications Outputs Resolution U2 U8 I1 Voltage 0.5...
More informationARS 2000 series Universal servo positioning controller
ARS 2000 series Universal servo positioning controller Extension modules Software tools Universal in applications Manufacturer- and system-independent (motor, controller, fieldbus) Automatic identification
More informationProtection class U8 I1. Linearity ±0.10 % f. s. (standard); optional ±0.05 % WB10ZG
Analog Output Position sensor with measuring tape Measurement range up to 2000 mm class IP65 Stainless steel measuring tape Analog output Specifications Outputs Resolution U2 U8 I1 Voltage 0.5... 10 V
More informationEFX IO84 Input/Output Module
EFX IO84 Input/Output Module Input/Output expansion module for EFX Controllers CANopen interface Surface electrostatically coated (cathodic immersion) 10...32V DC Technical Data Housing Dimensions (l x
More informationUltra flat POSICHRON position sensor. Current Resolution
Ultra flat Profile Housing with analog Ultra flat POSICHRON position sensor Only 8 mm high and 28 mm wide Protection class up to IP67 Measurement range 0... 100 to 0... 5750 mm Absolute position measurement
More informationTD_CAN Transceiver Modules Application Guide 2017
TD_CAN Transceiver Modules Application Guide 2017 1. CAN bus basic knowledge... 2 1.1 CAN basic characteristics... 2 1.2 CAN bus topology... 2 1.3 CAN bus transmission distance... 3 1.4 Number of nodes
More informationU8 I1. Linearity ±0.10 % f. s.; optional ±0.05 % WB12
Analog Output Position sensor with measuring tape Measurement range up to 4000 mm class IP67/IP69K Stainless steel measuring tape Analog output Specifications Outputs Resolution U2 U8 I1 Voltage 0.5...
More information3DM phase Digital Stepper Drive
3DM2283 3-phase Digital Stepper Drive 150-220VAC, 0.5-8.2A peak, Auto-configuration, Low Noise Anti-Resonance provides optimal torque and nulls mid-range instability Motor auto-identification and parameter
More informationDigiFlex Performance Servo Drive DPCANIA-060A400
DigiFlex Performance Servo Drive DPCANA-060A400 Description Power Range The DigiFlex Performance (DP) Series digital servo drives are designed to drive brushed and brushless servomotors. These fully digital
More informationAnalog Servo Drive 30A20AC
Description Power Range NOTE: This product has been replaced by the AxCent family of servo drives. Please visit our website at www.a-m-c.com or contact us for replacement model information and retrofit
More informationAnalog Servo Drive 100A40
Description Power Range The 100A40 PWM servo drive is designed to drive brush type DC motors at a high switching frequency. A single red/green LED indicates operating status. The drive is fully protected
More informationProtection class U8 I1. Linearity ±0.10 % f. s. (standard); optional ±0.05 % WB10ZG
Analog Output Position sensor with measuring tape Measurement range up to 2000 mm class IP65 Stainless steel measuring tape Analog output Specifications Outputs Resolution U2 U8 I1 Voltage 0.5... 10 V
More informationMagnetic absolute single-turn encoder BMSH MAGRES parallel
Magnetic absolute single-turn encoder BMSH MAGRES parallel features robust single-turn encoder up to 9 bit parallel interface miniature housing zero-point programmable general data voltage supply 5 VDC
More informationUniversal MEMS Inclination Sensor with Analog Output. Output /Excitation U6 U8 I1
PTAM27 Universal MEMS Inclination Sensor with Analog Output Analog Inclination Sensor with 1 axis or 2 axes in MEMS technology Measurement range ±180 with 1 axis or 2 axes class IP67 Linear analog ouput
More informationAnalog Servo Drive. Peak Current 16 A (11.3 A RMS )
Description The PWM servo drive is designed to drive three phase brushless motors with sine wave current at a high switching frequency. The drive requires two sinusoidal command signals with a 120-degree
More information42 mm sq /step
Stepping Motors 42 mm sq..9-1.8 /step RoHS Unipolar and Bipolar winding Lead wire and Connector type Based motor Holding torque at Step Rated Wiring Winding Rotor Weight 2-phase energization angle Winding
More informationJaguar Motor Controller (Stellaris Brushed DC Motor Control Module with CAN)
Jaguar Motor Controller (Stellaris Brushed DC Motor Control Module with CAN) 217-3367 Ordering Information Product Number Description 217-3367 Stellaris Brushed DC Motor Control Module with CAN (217-3367)
More informationB25A20FAC SERIES BRUSHLESS SERVO AMPLIFIERS Model: B25A20FAC 120VAC Single Supply Operation
B25A20FAC Series B25A20FAC SERIES BRUSHLESS SERVO AMPLIFIERS Model: B25A20FAC 120VAC Single Supply Operation FEATURES: All connections on front of amplifier Surface-mount technology Small size, low cost,
More informationNpaq Series Drive Racks
Npaq Series Drive Racks 3U plug-in drives 19 inch rack-mount design Flexible design provides the ability to drive brush, brushless, or stepper motors with the same amplifier 5 A to 30 A peak output current
More informationTETRA COMPACT - E AND FLEXI - PRO
TETRA COMPACT - E AND FLEXI - PRO THE ENHANCED SERVO BUNDLE Motor Power Company introduces its new brushless servo bundle: TETRA COMPACT- ENHANCED, brushless servomotors, perfectly matched with the FLEXI-PRO
More informationSoloist. Position Controller and Servo Amplifier PWM. Single axis digital servo controller with integral power supply and amplifier
Soloist Position Controller and Servo Amplifier PWM Single axis digital servo controller with integral power supply and amplifier Advanced software architecture shortens customer development time; use
More informationUniversal MEMS Inclination Sensor with Analog Output. Output /Excitation U6 U8 I1
PTAM27 Universal MEMS Inclination Sensor with Analog Output Analog Inclination Sensor with 1 axis or 2 axes in MEMS technology Measurement range ±180 with 1 axis or 2 axes class IP67 Linear analog ouput
More informationUSER MANUAL. Via Germania, Z.I. CAMIN PADOVA ITALY. Via Svizzera, Z.I. CAMIN PADOVA ITALY
USER MANUAL Seneca Z-PC Line SENECA s.r.l. Via Germania, 34 35127 Z.I. CAMIN PADOVA ITALY Via Svizzera, 17 35127 Z.I. CAMIN PADOVA ITALY Tel. +39.049.705355 705359 Fax. +39.049.70627 Web site: www.seneca.it
More informationBholanath. User s Manual. Precision Engineering Pvt.Ltd. BHSSD Step Servo Driver. Note:-
Bholanath Precision Engineering Pvt.Ltd. User s Manual Step Servo - BHSS - 750 W BHSSD Step Servo Driver Note:- Step servo drive & motor are matched pair with BH-75Vac power supply Email : support@bholanath.in
More informationBrushless Servo Motor Drives xdrive Series
Brushless Servo Motor Drives xdrive Series All-Digital, AC-Input, Velocity or Torque Control Allied Motion s xdrive servo drives are precision, all-digital DSP-based servo drive amplifiers capable of supplying
More informationNOVOHALL Rotary Sensor touchless transmissive. Series RFX-6900
NOVOHALL Rotary Sensor touchless transmissive Series RFX-6900 Special features Very robust design to extreme environmental conditions Touchless hall technology Electrical range up to 360, in single and
More informationIt is widely used in curving machine, processing equipment, packing machine, electronic machine, and etc.
DVS 2811 Description The DVS2811 is full digital 2-phase stepper driver based on DSP control,the voltage ranges from 40V to 130VAC. It is designed for use with the 2-phase hybrid stepper motor of all kinds
More informationRoHS. Unipolar and Bipolar winding Lead wire type 2H5654U20
Stepping Motors 56 mm sq. 1.8 /step RoHS Unipolar and Bipolar winding Lead wire type 35mm sq. Based motor Holding torque at Step Rated Wiring Winding Rotor Weight 2-phase energization angle Winding current
More informationLCC-10 Product manual
LCC-10 Product manual Rev 1.0 Jan 2011 LCC-10 Product manual Copyright and trademarks Copyright 2010 INGENIA-CAT, S.L. / SMAC Corporation Scope This document applies to i116 motion controller in its hardware
More informationStepnet. Panel. CANopen STEPPER MOTOR DRIVER
Panel Distributed Drive PVT, Profile, Homing Powerful Software Tools Stand-Alone Operation Stepper Controller Interface Trajectory Profiling Microstepping Servo Mode Electronic Damping Detent Torque Compensation
More informationManual 2DM556. Digital Stepper Drive.
2DM556 Digital Stepper Drive Manual Shenzhen Just Motion Control Electro-mechanics Co., Ltd TEL:+86-0755-26509689 FAX:+86-0755-26509289 www.jmc-motion.com Email:info@jmc-motion.com Address: Floor2, Building
More informationEncoders. Series 21 Hollow-Shaft Rotary Optical Encoders Digital incremental or sine/cosine and absolute format. Features & Benefits.
Digital incremental or sine/cosine and absolute format Allied Motion s Series 21 are cost effective, hollow shaft optical encoders that are easy to mount and provide high data rate capabilities. These
More informationProtection class. Male 8 pin socket M12 (ADCANOP: 5 pin socket)
WS10SG Analog, SSI or CANopen Output Very compact sensor for industrial applications Protection class IP65 Measurement range 0... 100 mm to 0... 1250 mm Analog output or A/D converted synchronous serial
More informationAnalog Servo Drive 30A8
Description Power Range The 30A8 PWM servo drive is designed to drive brush type DC motors at a high switching frequency. A single red/green LED indicates operating status. The drive is fully protected
More informationS100A40AC SERIES BRUSHLESS SERVO AMPLIFIERS Model: S100A40AC
S100A-AC Series S100A40AC SERIES BRUSHLESS SERVO AMPLIFIERS Model: S100A40AC FEATURES: Surface-mount technology Small size, low cost, ease of use Optical isolation, see block diagram Sinusoidal drive and
More informationW(G)S3.1 Position Sensor with Analog or A/D converted synchronous serial output
W(G)S3.1 Position Sensor with Analog or A/D converted synchronous serial output Position and Velocity Sensor for Long Ranges Protection Class IP50 Measurement Range: 0... 10000 mm to 0... 15000 mm 0...
More informationNo-Contact, CANbus Rotary Position Sensor NRH27C
No-Contact, CANbus Rotary Position Sensor NRH27C Non-Contact Hall-effect technology Wear-Free no mechanical degradation CANbus J1939 output Simple mounting, low-profile design 360 Measurement angle 5Vdc
More informationPosition Table Function. Closed Loop System. Network Based Motion Control. No Gain Tuning
2 2 Position Table Function Position Table can be used for motion control by digital input and output signals of host controller. You can operate the motor directly by sending the position table number,
More informationProtection Class (IEC 529)
(W)GS2 Velocity Sensor with Analog or A/D converted synchronous serial output Specifications Velocity Sensor with Position Option Class IP50 Measurement Range: 0... 1500 mm to 0... 2500 mm 0... 59.06 in
More information$MPTFE -PPQ 4UFQQJOH 4ZTUFN.JOJBUVSJ[FE $PNQBDU 4J[F $MPTFE -PPQ 4ZTUFN /P (BJO 5VOJOH /P )VOUJOH )JHI 3FTPMVUJPO 'BTU 3FTQPOTF
$MPTFE -PPQ 4UFQQJOH 4ZTUFN.JOJBUVSJ[FE $PNQBDU 4J[F $MPTFE -PPQ 4ZTUFN /P (BJO 5VOJOH /P )VOUJOH )JHI 3FTPMVUJPO 'BTU 3FTQPOTF ú ú ú ú ú ú 2 2 No Gain Tuning Conventional servo systems, to ensure machine
More informationEPOS2 24/2 EPOS2 24/5 DC (390438) EC (380264) DC/EC (390003) DCX (530239) (367676) (360665) (347717) (375711)
maxon motor control s EPOS2 are small-sized, full digital, smart positioning control units. Due to their flexible and high efficient power stage, the EPOS2 motion controllers drive brushed DC motors with
More informationOPERATING INSTRUCTIONS AND SPECIFICATIONS. NI 9853E 2-Port, High-Speed CAN Module
OPERATING INSTRUCTIONS AND SPECIFICATIONS NI 9853E 2-Port, High-Speed CAN Module This document describes how to use the National Instruments 9853E board and includes dimensions, pin assignments, and specifications
More informationservo ARS2000 openconcepts
servo ARS2000 openconcepts Universal servo positioning controller ARS 2000 The Company Metronix has developed, produced and distributed innovative drive technology for industrial machines and automotive
More informationVARAN Stepper Module VST 012
VARAN Stepper Module VST 012 The VST 012 is a VARAN module designed for the control of a stepper motor up to a maximum 10 A RMS. The available operating modes are full step, half step and micro step. The
More informationPOSICHRON PCRP32 Round Profile Housing with Analog Output
PCRP32 Round Profile Housing with Analog Output position sensor in a stainless steel pressure tube Protection class IP67/69K, IP68 Underwater applications, permanent pressure-proof up to 15 bar Measurement
More informationUser's guide RD4. Position measurement & control
User's guide RD4 Position measurement & control This publication was produced by Lika Electronic s.r.l. 2011. All rights reserved. Tutti i diritti riservati. Alle Rechte vorbehalten. Todos los derechos
More informationTETRA COMPACT - E AND FLEXI - PRO THE ENHANCED SERVO BUNDLE
TETRA COMPACT - E AND FLEXI - PRO THE ENHANCED SERVO BUNDLE Mo t or P ow e r Com pa n y www.m ot orpow e rc o. c om info@m ot orpow e rc o. i t All r ight s re se rve d. Comple t e or pa rt i a l re produ
More informationTECHNICAL DATASHEET #TDAX ISOLATED DUAL CHANNEL UNIVERSAL SIGNAL CONVERTER
Preliminary TECHNICAL DATASHEET TDAX130540 ISOLATED DUAL CHANNEL UNIVERSAL SIGNAL CONVERTER 2 Analog (Bipolar), Resistive, Digital, Frequency (RPM) or PWM Signal Inputs Encoder Input Magnetic Pick Up Input
More informationTECHNICAL DATASHEET #TDAX A DC MOTOR CONTROLLER P/N: AX Variable Speed Control, Onboard I/O CAN SAE J1939, Rugged Packaging
TECHNICAL DATASHEET #TDAX102000 35A DC MOTOR CONTROLLER P/N: AX102000 Variable Speed Control, Onboard I/O CAN SAE J1939, Rugged Packaging with Electronic Assistant Features: Unidirectional or bi-directional
More information3U High, 19" Drive Rack
3U High, 19" Drive Rack 3U plug-in amplifiers Dedicated control card for each amplifier 19 inch rack-mount design Flexible design provides the ability to drive brush, brushless, or stepper motors with
More informationDA DA 10 Technical Specification. Page 1/14. Volz Servos GmbH & Co. KG servos.com
1/14 DA 10 DA 10 05 42 2/14 Content 1. General Description... 3 2. Operating Data... 4 3. Performance... 5 4. Command Signal... 6 5. Materials and Protective Features... 7 6. Dimensions... 7 6.1. Installation
More informationMDrive Plus Stepper motors with integrated electronics. MDrive 17 Plus Speed Control with programmable velocity control
Stepper motors with integrated electronics MDrive 17 Plus Description Presentation The is a 1.8 2-phase stepper motor with on-board control electronics. The velocity control uses voltage, current, or PWM
More information