Since 1987 Developed, Created and Made in Spain NDV6/ND6V VIDEO & DATA TRANSCEIVER, AUDIO & CONTACT
|
|
- Theodore Elliott
- 6 years ago
- Views:
Transcription
1 Since 987 Developed, Created and Made in Spain NDV6/ND6V VIDEO & DATA TRANSCEIVER, AUDIO & CONTACT
2 CONTENTS General functionality and features of the equipment. Technical specifications. Application. Connection scheme for standalone version. Connection scheme for rack assembly version. Light signalling description for standalone version Light signalling description for rack assembly version Configuration. The central pages contain a : scale template of the fixation for standalone version.
3 NDV6 / ND6V VIDEO + DATA TRANSCEIVER, AUDIO & CONTACT NDV6 TX Vídeo + Data + Audio + Contact ND6V RX Vídeo + Data + Audio + Contact Optic Fiber (-40 to 74 C) Industrial Range - VideoTransmitter / Receiver + Tranceiver of Data channels, of bidirectional audio and contact for optical links point to point, up 4.5 Km Multimode (MM) and 50 Km Singlemode (SM). - Power supply: from up 4 Vac/Vdc - Transmission over Fiber optic. - Mechanical format: Standalone/ DIN Rail and Rack-card (Pawal) - Extended temperature range. NDV6/ND6V allow links point to point for transmission digital of video + data transceivers, bidirectional audio and contact over Fiber optic up 50 Km depending of version. Additionally to transmission /reception of video, implements next functions: Two bidirectional channels of communications compatible with Standard EIA/TIA/RS-3, 4 and 485 over or 4 wires. Configurable time forced for RS485 transmission. Terminating resistor selectable for the differential communication. Two bidirectional audio channels with differential mode input or unipolar. Transmission / reception of free contact. Configuration PC through serial port. Setting for the remote device through the PC of control center. Led signal for verification of links, contact, remote/local connection, data and audio transmission. Plug and Play design faciliting installation and verification. Transmitter Receiver Wavelength Connector Fiber Max. Loss NDV65N NDV65N6 NDV65M NDV65M6 ND6V6N ND6V6N6 ND6V6M ND6V6M6 30/550nm 550/30nm 30/550nm 550/30n SC-PC SC-PC xmm (6,5/5 o 50/5) xsm (9/5) db (50/5: 4 km) (6.5/5: 3.5 km) 9dB (9/5: 50 km) = Rack (Pawal) 6 = Standalone/DIN Rail () Attenuations: At 30nm, db Km for 6.5/5 and 0.7dB/km for 50/5. For 9/5, 0.3dB/km. (Ideal conditions) () Maximum distance restriction due to the fiber modal bandwith (with ideal conditions).
4 Technical specifications: Video Input/output impedance 75 Ω Input/output voltage, Vppmax Video connector BNC Bandwidth 0 Hz 6 MHz SNR > 60 db Sync error < 5.0 % Differential gain <.5 % Differential phase < º C/L Gain < 5 % Communications Data form selectable Data rate Data connector Resistor for RS4/RS485 Audio Input voltage max. Input Impedance Output Impedance Resolution A/D SNR Bandwidth Contact Max. contact current Max. contact voltage Max. contact power Contact resistance Input Optic characteristics Multimode optical power Multimode receiver sensitivity Singlemode optical power Singlemode receiver sensitivity RS3/4/485 up 5. kbps RJ45 0 Ω 3 Vpp 9 kω 600 Ω bits >60dB 8 khz A 0Vdc 60 W 00 mω Dry contact -9dBm -30dBm -5dBm -34dBm General Consumption NDV6/ND6V 60 ma / Vdc Max. power NDV6/ND6V. W Power system PAWAL o to 4 Vac/Vdc ± 5% MTBF hours Dimensions NDxxxx (rack) mm Sub-chasis 7TE,3U Weight 470 gr Dimensions NDxxxx6 (standalone/ DIN rail) Weight 4x06x65 mm 430 gr Operating temperature -40 to 74 C Storage temperature -55 to 85 C Relative humidity 95% without condensation Max. power with video and link with 0Vdc power supply.
5 Application:
6 CONNECTION DIAGRAM NDV6/ND6V STANDALONE Equipments with this scheme: NDV65X6, ND6V6X6 Tel: Fax:
7 CONNECTION DIAGRAM NDV6/ND6V PAWAL Equipments with this scheme: NDV65X, ND6V6X Tel: Fax:
8 AUDIO CONNECTOR Pin Description +OUT -OUT +IN +IN -IN -IN +OUT -OUT DATA CONNECTOR Pin Description +RX RS-4/RS-485 -RX RS-4/RS-485 +TX RS-4/RS-485 TX RS-3 RX RS3 -TX RS-4/RS-485 NC GND CONTACT CONNECTOR INPUT OUTPUT Description GND Contact input Contact output Contact output Light signalling description and standard data configuration for NDV6/ND6V standalone format Pin info@adilec.com Tel: Fax:
9 AUDIO CONNECTOR Pin Description +OUT -OUT +IN +IN -IN -IN +OUT -OUT DATA CONNECTOR Pin Description +RX RS-4/RS-485 -RX RS-4/RS-485 +TX RS-4/RS-485 TX RS-3 RX RS3 -TX RS-4/RS-485 NC GND CONTACT CONNECTOR INPUT Light signalling description and standard data configuration for NDV6/ND6V pawal format Pin OUTPUT Description GND Contact input Contact output Contact output info@adilec.com Tel: Fax:
10 Configuration mode To use the NDV6/ND6V configuration mode is necessary a communications software like HyperTerminal or Teraterm. It must be configured with a speed of 900bps, 8 data bits, no parity, stop bit and disable any flow control. Push the configuration switch during almost seconds to activate the configuration mode, until the red power supply led will switched off. Then, when the switch is released, the configuration menu will appear in the HiperTerminal or Teraterm. NDV6 Configuration menu The equipment configuration will be modified with the keys from 0 to 9, and the current configuration will appear at the end of the menu. Key : Serial channel configuration. With the key we switch the channel configuration between RS3 RS4 RS485 RS485 full duplex Key : Serial channel configuration. The same than the last point, but for the nd serial channel. Key 3: Channel termination resistor. This enables the 0Ω termination resistor with the RS485 communication mode. With the RS3 communication mode this resistor will remain disabled, and with the RS4 communication mode the resistor will remain enabled. Key 4: Channel termination resistor. The same than the last point, but for the nd serial channel. Key 5: Audio channel input configuration. It changes the audio input from unipolar (-IN to Ground) to differential input. Key 6: Audio channel input configuration. The same than the last point, but for the nd audio channel. Key 7: RS485 Dwell time. It fixes the time the RS485 signal remains active before to change to high impedance after the last write operation in the RS485 bus. We can select the next values: 0µs, 0µs, 50µs, 00µs, 00µs, 500µs, 000µs y 000µs. Key 8: Restore default configuration. The default configuration is recovered.
11 Key 9: Save and Exit. The current configuration is saved and then we leave from the configuration menu. The red power supply led is switched on after that. Key 0: Exit and configure remote equipment. The configuration menu of the remote equipment is showed without saving the changes in the local equipment. With this option we can change the remote configuration from the local equipment. We can leave from the configuration menu in three different ways: With the key 9 Save and Exit. Timeout. We have minute available to change the menu configuration. After that time, the equipment leaves itself from the menu configuration. The changes are not saved by this way. Leave from the menu in a manual way. Push the configuration switch almost 3 seconds. The changes are not saved by this way.
12 ADILEC Enginyeria, S.L. Tel.: Fax: info@adilec.com Francesc Macià, Molins de Rei, Spain Rev. 0 January 05
Since 1987 Developed, Created and Made in Spain NDV5/ND5V VIDEO & DATA TRANSMITTER/RECEIVER
Since 1987 Developed, Created and Made in Spain NDV5/ND5V VIDEO & DATA TRANSMITTER/RECEIVER CTENTS General functionality and features of the equipment. Technical specifications. Application. Connection
More informationSince 1987 Developed, Created and Made in Spain NDR6 OPTIC DATA TRANSCEIVER
Since 987 Developed, Created and Made in Spain NDR6 OPTIC DATA TRANSCEIVER CTENTS General functionality and features of the equipment. Technical specifications. Application. Connection scheme for standalone
More informationOM7AT & OM7AR1 (Stand alone) ROM7AT & ROM7AR1 (Rack mount)
OM7AT & OM7AR1 (Stand alone) ROM7AT & ROM7AR1 (Rack mount) IRIG Time Code Electrical to Fiber Optic Transceiver Operating Manual Rev. 1.3 December 20, 2015 Luxcom Technologies Inc., 102 WALGREEN ROAD,
More informationSelection guide. Communication accessories. Communication accessory selection guide. Characteristics
Communication accessories Selection guide There are 2 types of Sepam communication accessories: b communication interfaces, which are essential for connecting Sepam to the communication network b converters
More informationCFO900 Series. User Manual. Audio/Data/Current Loop Mux/Demux CSX111, CSX123 & CSX222. CFO CSX series user manual, , rev003
CFO900 Series User Manual Audio/Data/Current Loop Mux/Demux CSX, CSX23 & CSX222 CFO CSX series user manual, 59300048, rev003 Contents The CSX Series Multiplexer Introduction... Introduction... Frame installation...2
More informationThe I-2532 CAN to Fiber Converter
The I-2532 CAN to Fiber Converter User s Manual Warranty All products manufactured by ICP DAS are under warranty regarding defective materials for a period of one year from the date of delivery to the
More informationSWT 3000 Teleprotection technical data siemens.com
Power network telecommunication SWT 3000 Teleprotection technical data siemens.com Sustainable success for high-voltage power networks The SWT 3000 Teleprotection system has been the first choice for reliable
More informationRS 485/422 to Fibre Optic Modems ELO E243, ELO E244, ELO E245. Operation manual
RS 485/422 to Fibre Optic Modems ELO E243, ELO E244, ELO E245 Operation manual 1.0 Introduction 3 2.0 Operation principles 3 3.0 Installation 3 3.1 RS422 Interface Connection 4 3.2 RS485 Interface Connection
More informationDigital Microwave Radios
CM Digital Microwave Radios Operating at 6, 7, 8 & 11 GHz With Capacities of 4, 8, 16E1 E3, STM-1 & 2x100BaseT The CM offers bandwidth efficient long haul data transmission for common carrier, cellular
More informationPRODUCT INFORMATION B&B ELECTRONICS. Port-Powered RS-232 Fiber Optic Modem with Handshake Support. Model 9PFLST. Description. RS-232 Connections
-01-1/ 00 by B&B Electronics. All rights reserved. Model Port-Powered RS- Fiber Optic Modem with Handshake Support Description The allows any two pieces of RS- asynchronous serial equipment to communicate
More informationMoxa ICF-1280I Series Industrial PROFIBUS-to-Fiber Converter
Moxa ICF-1280I Series Industrial PROFIBUS-to-Fiber Converter Hardware Installation Guide First Edition, August 2013 2013 Moxa Inc. All rights reserved. P/N: 1802012800011 Introduction The ICF-1280I series
More informationRoHS Compliant 1310 nm Multi-mode Transceiver 2 5, LC Duplex Connector, 3.3 V 155 Mbps ATM/SONET OC-3/SDH STM-1/Fast Ethernet
Features Low power consumption Industry standard 2 5 footprint LC duplex connector Single power supply 3.3 V Differential LVPECL inputs and outputs Class 1 laser product complies with EN 60825-1 Ordering
More informationSPECIAL SPECIFICATION 6419 Fiber Optic Video Transceiver with Data
2004 Specifications CSJ 0617-01-169 SPECIAL SPECIFICATION 6419 Fiber Optic Video Transceiver with Data 1. Description. This Item shall govern for the furnishing and installation of Video optical transceiver
More informationI-2533CS series User Manual
I-2533CS series User Manual Version 1.0.0, Sep. 2013 Service and usage information for I 2533CS / I 2533CS 60 / I 2533CS A / I 2533CS B I-2533CS series CAN to Single Mode Fiber Bridge User Manual (version
More informationFOSTCDR. Industrial Serial to Multimode Fiber Optic Converter PRODUCT INFORMATION B&B ELECTRONICS. Specifications Serial Technology
FOSTCDR pn 8684R1 FOSTCDR-0812ds page 1/5 Industrial Serial to Multimode Fiber Optic Converter Data Rates up to 115.2 kbps 2.5 Mile (4 km) Range 10 to 30 VDC Input Voltage Wide Operating Temperature 2000V
More information285E Series DIGITAL FIBER OPTIC AUDIO/DATA TRANSPORT SYSTEM
285E Series DIGITAL FIBER OPTIC AUDIO/DATA TRANSPORT SYSTEM BCI reserves the right to make changes to the products described herein without prior notice or consent. No liability is assumed as a result
More informationSOLUTIONS FOR AN EVOLVING WORLD. T1/E1 and C Fiber Service Units
SOLUTIONS FOR AN EVOLVING WORLD T1/E1 and C37.94 Fiber Service Units T1/E1 & C37.94 1 April 2013 Your world is changing and so are we. At RFL, we know your needs change much faster than your infrastructure.
More informationCONTROL MICROSYSTEMS SCADAWave Radio Transceiver. Hardware Manual
5908 SCADAWave Radio Transceiver Hardware Manual CONTROL MICROSYSTEMS SCADA products... for the distance 48 Steacie Drive Telephone: 613-591-1943 Kanata, Ontario Facsimile: 613-591-1022 K2K 2A9 Technical
More informationAXGE Gbps Single-mode 1310nm, SFP Transceiver
AXGE-1354 1.25Gbps Single-mode 1310nm, SFP Transceiver Product Overview Features The AXGE-1354 family of Small Form Factor Pluggable (SFP) transceiver module is specifically designed for the high performance
More informationRF over Fiber Optic Transceiver OZ816 Series Ultra Broadband 6 GHz
FEATURES 30 MHz to 6.0 GHz Bandwidth Approx Size: 3 x 5 x 1.25 in. Weight ¾ pound 40 C to +5 C Operating Temperature LD/PD Monitoring & Alarm High Spurious Free Dynamic Range Automatic Optical Power Control
More information[ tima-datasheet-en v11.1 ]
specifically designed for protection, automation and control applications in power systems 60 ns (99%) maximum time deviation single or dual 10/100Base-T Ethernet port(s) VLAN / IEEE 802.1Q support RS232
More informationOC-12/STM-4 SFP Multimode Transceivers with Digital Diagnostics
OC-/STM- SFP Multimode Transceivers with Digital Diagnostics TRPAMM Product Description The TRPAMM SFP fiber optic transceivers with integrated digital diagnostics monitoring functionality provide a quick
More informationSpecification Sym Notes Minimum Typical Maximum Units 900 MHz Operating Frequency Range MHz
900 MHz FHSS DNT90/Ethernet Gateway Optional 128-Bit AES Encryption Point-to-point, Point-to-multipoint or Store and Forward Operation 158 mw EIRP 900 MHz Transmitter Power 10/100Base-T Auto-sensing Ethernet
More informationProduct Specification. 6.1 Gb/s Short-Wavelength SFP+ Transceiver FTLF8526P3BNL
Product Specification 6.1 Gb/s Short-Wavelength SFP+ Transceiver FTLF8526P3BNL PRODUCT FEATURES Up to 6.1 Gb/s bi-directional data links Hot-pluggable SFP+ footprint Built-in digital diagnostic functions
More informationSinglemode 155Mbps Optical Transceiver SFP with MSA
Features Compliant SFP MSA Compliant with GR-253-CORE SONET OC-3 and ITU-T G.957 SDH STM-1 specifications Metal case & LC duplex receptacle with bail de-latch Transmitter disable input and receiver loss
More informationFast Ethernet SFP Multimode Transceivers
Fast Ethernet SFP Multimode Transceivers TRXNFEMM Product Description The TRXNFEMM series of fiber optic transceivers provide a quick and reliable interface for 00BASE-FX Fast Ethernet multimode applications.
More informationUniversal RS232/CMOS to RS422/RS485 Converter
TOSHIBA INTERNATIONAL CORPORATION Universal RS232/CMOS to RS422/RS485 Converter Rev No.: 2 Page No.: 1 RS232/CMOS to RS422/RS485 Converter converts RS232/CMOS lines to balanced RS422 or RS485 signals.
More informationUK - SFP MONOMODO 20 KM 1310 NM. DTS3112L - C(D)
Description Datocom 1 DTS3112L-C(D)20 optical transceivers are designed for GE/1 x FC optical interface for data communications with single mode fiber (SMF), and multimode fiber (MMF) as well. They operate
More informationAR-DN-RS232. An-10 / Rapid RS232 Interface. Product Guide. Overview. Features
AR-DN-RS232 An-10 / Rapid RS232 Interface Product Guide Overview The AR-DN-RS232 is a device that is used as a 2 way gateway between third party systems and the CP An-10 or Rapid lighting control systems
More informationLow Power with Long Range RF Module DATASHEET Description
Wireless-Tag WT-900M Low Power with Long Range RF Module DATASHEET Description WT-900M is a highly integrated low-power half-'duplex RF transceiver module embedding high-speed low-power MCU and high-performance
More informationSERIES DL221 10/100 ETHERNET TRANSCEIVER USER MANUAL
SERIES DL221 10/100 ETHERNET TRANSCEIVER USER MANUAL Radiant Communications Corporation P.O. BOX 867 5001 Hadley Road South Plainfield, NJ 07080 800.969.3427 Fax 908.757.7666 E-mail: sales@rccfiber.com
More informationInstruction Manual RT-93285SL RR-93285SL Thirty-two Channel Video Multiplexer With Two Bi-directional Data Channels
Instruction Manual RT-93285SL RR-93285SL Thirty-two Channel Video Multiplexer With Two Bi-directional Data Channels Copyright 2006, American Fibertek, Inc. 0222JD Table of Contents Functional Description...3
More informationProduct Specification OC-48 SR-1/STM S-16 Multirate 2x10 SFF Transceiver FTLF1321S1xTL
Product Specification OC-48 SR-1/STM S-16 Multirate 2x10 SFF Transceiver FTLF1321S1xTL PRODUCT FEATURES Up to 2.67Gb/s bi-directional data links Standard 2x10 pin SFF footprint (MSA compliant) Analog diagnostics
More informationReason RT430/RT434. GE Grid Solutions. GNSS Precision-Time Clocks. Precise Time Synchronization. Flexible Design. Hardened for Industry.
GE Grid Solutions Reason RT430/RT434 GNSS Precision-Time Clocks The demand for accurate time synchronization available 24/7 increases with the growth of critical substation applications, such as phasor
More information3V DUAL MODE TRANSCEIVER 434 MHz BAND Product Code:
3V DUAL MODE TRANSCEIVER 434 MHz BAND Product Code: 32001269 Rev. 1.6 PRODUCT SUMMARY: Dual-mode transceiver operating in the 434 MHz ISM band with extremely compact dimensions. The module operates as
More informationGBS-9280-CXX0 5V / CWDM / Gb/s Single-Mode Gigabit Interface Converter (GBIC)
**** 5V / CWDM / 2.125 Gb/s Single-Mode Gigabit Interface Converter (GBIC) ** FEATURES l 18-Wavelength CWDM GBIC Transceivers l 2.5 Gbps Bi-directional Data Links l Compliant with 1X / 2X Fibre Channel
More informationVery Long Haul Gigabit Ethernet SFP Transceivers with Digital Diagnostics
Very Long Haul Gigabit Ethernet SFP Transceivers with Digital Diagnostics TPEGKVX-E Product Description The TPEGKVX-E SFP fiber optic transceivers with integrated digital diagnostics monitoring functionality
More informationCXE880 FIBRE OPTIC NODE
Kari Mäki 21.4.2011 1(6) CXE880 FIBRE OPTIC NODE The CXE880 is a fibre deep optical node. It is designed for cases where high performance and cost effectiveness are a demand. Requirements of future networks,
More informationModem RS232/RS422/RS485. to MM optic fibers. RS-232 to Multimode Optic. Fiber Converter. Characteristics DIN rail mounting.
RS-232 to Multimode Optic Modem RS232/RS422/RS485 Fiber Converter to MM optic fibers ELO E14C E17A DIN rail mounting TxD, RxD up to transferring 6km over MM fiber Communication Max. data rate 115.2 protocol
More informationSPECIAL SPECIFICATION 6609 Fiber Optic Color Video and Data Transmission Equipment
1995 Metric CSJ's 1047-03-056 & 0008-08-066 SPECIAL SPECIFICATION 6609 Fiber Optic Color Video and Data Transmission Equipment 1. Description. This Item shall govern for the furnishing and installation
More informationSFP-10G-M 10G Ethernet SFP+ Transceiver
SFP+, LC Connector, 850nm VCSEL with PIN Receiver, Multi Mode, 300M Features Applications High-speed storage area networks Computer cluster cross-connect Custom high-speed data pipes 10GE Storage, 8G Fiber
More informationInstruction Manual MT-945SL Four Channel Video Transmitter With Two Bi-Directional Data Channels
Instruction Manual MT-945SL Four Channel Video Transmitter With Two Bi-Directional Data Channels Copyright 2006, American Fibertek, Inc. 0307JD Table of Contents Functional Description... 3 Installation...
More informationSinglemode 1.25Gbps Optical Transceiver SFP with MSA
Features Compliant with SFP MSA Compliant with IEEE 802.3z Gigabit Ethernet 1000BASELX specification Metal case & LC duplex receptacle with bail delatch Transmitter disable input and receiver loss of signal
More informationMulti-rate OC-12/STM-4 SFP Multimode Transceivers with Digital Diagnostics
Multi-rate OC-/STM- SFP Multimode Transceivers with Digital Diagnostics TRXAMM Multi-Rate Product Description The TRXAMM Multi-rate SFP fiber optic transceivers with integrated digital diagnostics monitoring
More informationFOM-5A, 6A Asynchronous Fiber Optic Modems
ORDERING FOM-5A/*/+ Asynchronous Sub-miniature Fiber Optic Modem FOM-6A/*/+/# Asynchronous Miniature Fiber Optic Modem * Specify: F for female 25-pin connector M for male 25-pin connector + Specify: ST
More informationOEM PRODUCTS WIRELESS WORLD LOCAL SOLUTION
OEM PRODUCTS 2008 www.satel.com 2 M3 The M3 is a small and light-weight radio modem designed for integration into the user s terminal equipment. The modem and transceiver are enclosed in a steel or aluminium
More informationSentinel 3: Speed, flexibility, certainty
]= V1.2 Sentinel 3: Speed, flexibility, certainty Sentinel 3 is the most advanced RF over fiber test and measurement system for: EMP test and EMC conformance HIRF aircraft clearance Simulated lightning
More informationOperation. Displayed channel. Measuring range. Status indication/ remote control Key lock Measuring mode/ time constant. Scale.
Electronics & Software Type 5080A... Multichannel Laboratory This universal laboratory charge amplifier can be used for force and torque measurements with piezoelectric dynamometers or force plates. Piezoelectric
More informationOptiva OTS-2 18 GHz Amplified Microwave Band Fiber Optic Links
MHz to 18 GHz Amplified Microwave Transport System The Optiva OTS-2 18 GHz Microwave Band transmitter and receiver are ideal to construct transparent fiber optic links in the MHz to 18 GHz frequency range
More informationMulti-Rate Gigabit Ethernet & Fiber Channel SFP Transceivers with Digital Diagnostics
Multi-Rate Gigabit Ethernet & Fiber Channel SFP Transceivers with Digital Diagnostics TRPUGCLXx000EG Pb Product Description The TRPUG-EG SFP series of multi-rate fiber optic transceivers with integrated
More informationCXE880 FIBRE OPTIC NODE
Kari Mäki 4.3.2008 1(6) CXE880 FIBRE OPTIC NODE The CXE880 is a fibre deep optical node. It is designed for cases where high performance and cost effectiveness are a demand. Requirements of future networks,
More informationSFP Optical Transceivers
Technical Specifications Absolute Maximum Ratings Parameters Symbol Min Max Unit Supply Voltage Vcc -0.5 4.5 V Storage Temperature Ts -40 +85 ᴼC Operating Humidity - 5 85 % Recommended Operating Conditions
More informationR40 Mk III AIS Base Station
R40 Mk III AIS Base Station The new R40 Mk III AIS Base Station from Saab TransponderTech is a result of our on-going efforts to enhance all our products. The R40 Mk III is equipped with a new Base Station
More information125Mbps~155Mbps Multimode 850nm, SFP Transceiver
AXFE-5814 125Mbps~155Mbps Multimode 850nm, SFP Transceiver Product Overview Features The AXFE-5814 family of Small Form Factor Pluggable (SFP) transceiver module is specifically designed for the high performance
More information155Mbps Single-mode 1310nm, SFP Transceiver
AXSH-1324 155Mbps Single-mode 1310nm, SFP Transceiver Product Overview Features The AXSH-1324 family of Small Form Factor Pluggable (SFP) transceiver module is specifically designed for the high performance
More informationSPECIAL SPECIFICATION 6734 RS-232 Optical Modem
2004 Specifications CSJ 0924-06-244 SPECIAL SPECIFICATION 6734 RS-232 Optical Modem 1. Description. This Item shall govern for the furnishing and installation of Fiber Optic RS- 232 Data Modem (OTR) in
More informationProduct Specification OC-12 SR-1/STM I-4 or OC-12 IR-1/STM S-4.1 2x5 SFF Transceiver FTLF1322F2xTR
Product Specification OC-12 SR-1/STM I-4 or OC-12 IR-1/STM S-4.1 2x5 SFF Transceiver FTLF1322F2xTR PRODUCT FEATURES Up to OC-12/STM-4 bi-directional data links Standard 2x5 pin SFF footprint (MSA compliant)
More informationMiniature Synchronous Multipoint Modems
ME1735A-F JULY 2003 Miniature Synchronous Multipoint Modems CUSTOMER SUPPORT INFORMATION Order toll-free in the U.S.: Call 877-877-BBOX (outside U.S. call 724-746-5500) FREE technical support 24 hours
More informationOptiva OTS-2 40 GHz Amplified Microwave Band Fiber Optic Links
2 GHz to 4 GHz Amplified Microwave Transport System The Optiva OTS-2 4 GHz Microwave Band transmitter and receiver are ideal to construct transparent fiber optic links in the 5 MHz to 4 GHz frequency range
More informationProduct Specification Gb/s RoHS Compliant Short-Wavelength 2x7 SFF Transceiver. FTLF8524E2xNy
Product Specification 4.25 Gb/s RoHS Compliant Short-Wavelength 2x7 SFF Transceiver FTLF8524E2xNy PRODUCT FEATURES Up to 4.25 Gb/s bi-directional data links 2x7 pin SFF-like footprint Built-in digital
More information10Gb/s SFP+ Optical Transceiver Module 10GBASE-SR/SW
10Gb/s SFP+ Optical Transceiver Module 10GBASE-SR/SW Features 10Gb/s serial optical interface compliant to 802.3ae 10GBASE SR Electrical interface compliant to SFF 8431 specifications for enhanced 8.5
More informationOC-3/STM-1 SFP CWDM Transceivers with Digital Diagnostics
OC-/STM- SFP CWDM Transceivers with Digital Diagnostics TRPE0-G CWDM Pb Product Description The TRPE0-G CWDM SFP series of fiber optic transceivers with integrated digital diagnostics monitoring functionality
More informationOptiva OTS-2 40 GHz Amplified Microwave Band Fiber Optic Links
5 MHz to 4 GHz Amplified Microwave Transport System The Optiva OTS-2 4 GHz Microwave Band transmitter and receiver are ideal to construct transparent fiber optic links in the 5 MHz to 4 GHz frequency range
More informationMulti-rate Gigabit Ethernet & Fibre Channel SFP CWDM Transceivers with Digital Diagnostics
Multi-rate Gigabit Ethernet & Fibre Channel SFP CWDM Transceivers with Digital Diagnostics TRPGxxXIxG CWDM Product Description The TRPGxxXIxG SFP series of multi-rate fiber optic transceivers with integrated
More information10 GB/s 10Km CWDM SFP+ Transceivers
The RTXM228-5XX 10Gigabit DFB laser with CWDM transceiver is designed to transmit and receive serial optical data links up from 8.5 Gb/s to 10.52 Gb/s data rate over 10km singlemode fiber. The Transceiver
More informationSolid State Broadband High Power Amplifier
The BBS4A5AVT (2157) is suitable L & S Bands broadband or band specific high power applications. This amplifier utilizes high power GaN devices that provide wide frequency response, high gain, high peak
More informationSFP-GE-LX Gigabit Ethernet-Singlemode Transceiver SFP, Duplex LC Connector, 1310nm DFB 40km for Single Mode Fiber, RoHS Compliant
Description The SFP-GE-LX40 is specifically designed for high performance integrated duplex data transmission over single mode optical fiber. This transceiver module is compliant with Gigabit Ethernet
More informationLangton House, 19 Village Street, Harvington, Worcestershire. WR11 8NQ Tel: Fax: RTB5211 UHF FULL DUPLEX BASE STATION
Langton House, 19 Village Street, Harvington, Worcestershire. WR11 8NQ Tel:- 01789 777040 Fax:- 01789 881330 RTB5211 UHF FULL DUPLEX BASE STATION OPERATORS MANUAL Print Date 31/10/2008 Page 1 of 10 E2057-00MA-01.doc
More informationSNR-XFP-WXX-40 10Gbps
Tx: 1270nm/Rx: 1330nm BIDI XFP Transceiver for 10GbE/10FC Tx: 1330nm/Rx: 1270nm BIDI XFP Transceiver for 10GbE/10FC RoHS 6 Compliant Features Supports 9.95Gb/s to 10.5Gb/s data rates Distance up to 40km
More informationInstruction Manual MX-485-S Bi-directional RS485 Data Transceiver
Instruction Manual MX-485-S Bi-directional RS485 Data Transceiver Copyright 2005, American Fibertek, Inc. 1020JD Table of Contents Functional Description...3 Installation...3 Power Source...3 Power Connection...3
More informationROHS Compliant MM SFP Transceiver 1.25Gb Gigabit Ethernet
Product Overview WFT s SFP transceiver modules is specifically designed for the high performance and cost-effectiveness integrated duplex data link over a single fiber. The high-speed laser diode and photo
More informationF290X / F293X FOM II Series Fiber Optic Isolator Technical Manual
F290X / F293X FOM II Series Fiber Optic Isolator Technical Manual Revision G Copyright 2017 VERSITRON, Inc. 83 Albe Drive / Suite C Newark, DE 19702 www.versitron.com E031130243 PROPRIETARY DATA All data
More information1270 nm TX / 1330 nm RX, 10.3 Gbps Digital Diagnostic 1-Fiber SM LC SFP+ Transceiver
* / SPB-2860BLWG / SPB-2860ALWG (RoHS Compliant) 1270 nm TX / 1330 nm RX, 10.3 Gbps Digital Diagnostic 1-Fiber SM LC SFP+ Transceiver FEATURES 1-Fiber Bi-Directional SFP Optical Transceiver Up to 10.3
More informationTPP3XGDS0x000E2G 850nm SFP+ Transceiver
Features 850nm VCSEL laser TPP3XGDS0x000E2G Transmission distance up to 300m on OM3 MM fiber Low power consumption Wide Case Operating Temperature Range Compliant with SFP+ Electrical MSA SFF-843 Compliant
More informationQuad-rate 4GFC, 2GFC, 1GFC & GbE CWDM SFP Transceiver
Quad-rate GFC, GFC, GFC & GbE CWDM SFP Transceiver TRPEFKZRCxG Pb Product Description The TRPEFKZR CWDM SFP series of fiber optic transceivers with integrated digital diagnostics monitoring functionality
More informationThe Price Performance Leader in 100% Compatible Optical Transceivers GBIC-GE-S40K Part Number: GBIC-GE-S40K PRODUCT FEATURES APPLICATIONS
Part Number: GBIC-GE-S40K Quick Spec: Manufacturer Compatibility: Form Factor: TX Wavelength: Reach: Cable Type: Rate Category: Interface Type: Digital Optical Mon. (DOM): Connector Type: PRODUCT FEATURES
More informationMulti-rate Gigabit Ethernet & Fibre Channel SFP Transceivers with Digital Diagnostics
Multi-rate Gigabit Ethernet & Fibre Channel SFP Transceivers with Digital Diagnostics TRPEG-EG Single Mode Pb Product Description The TRPEG-EG SFP series of multi-rate fiber optic transceivers with integrated
More informationProduct Features. Applications. Standards Compliance. 10G SFP+ LR Transceiver. General Description
General Description Accelight ASP10I-LR is designed for use in 10 Gb/s links over single mode fibers(smf). It is compliant with the SFP+ MSA and industry standard SFF-8472. The module incorporates a 1310nm
More informationUtility Communications Teleprotection Equipment TPT-200
Utility Communications Teleprotection Equipment TPT-200 5C Communications Inc. All rights reserved Teleprotection is designed to transfer protection commands coming, in most cases, from distance protection
More informationT B B S x C D 2 G A M
Specification Small Form Factor Pluggable SC Receptacle SFP ONU - Bidirectional Optical Transceivers 1000BASE-BX 1250Mbit/s TX 1490nm / RX 1310nm Ordering Information T B B S x C D 2 G A M Voltage / Temperature
More information1550nm 40km SFP+ Transceiver
550nm 40km SFP+ Transceiver TPPXGJERxG Pb Product Description The TPPXGJERxG is an enhanced small form factor pluggable (SFP+) fiber optic transceiver with digital diagnostics monitoring functionality
More informationSFP CWDM Dual Channel Optical Transmitter
SFP CWDM Dual Channel Optical Transmitter TRPVGJTC000xxG Pb Product Description The TRPVGJTC000xxG is a dual channel optical transmitter module designed to transmit optical serial digital signals as defined
More informationGAUSS High Power UHF Radio
[] Table of contents Table of contents... 1 1. Introduction... 3 Features... 4 Block Diagram... 6 2. Pinouts... 7 3. Absolute Maximum Ratings... 9 4. General Recommended Operating Conditions... 10 5. RF
More informationMultimode 1.25Gbps 850nm Optical Transceiver SFP with MSA
Features Compliant with SFP MSA Compliant with IEEE 802.3z Gigabit Ethernet 1000BASE-SX specification Metal case & LC duplex receptacle with bail de-latch Transmitter disable input and receiver loss of
More informationTransceiver, Chassis Connectors, and Cable and Adapter Specifications
APPENDIXB Transceiver, Chassis Connectors, and Cable and Adapter Specifications Revised: January 4, 2012 This appendix covers the transceivers supported by the Catalyst 4948E and the Catalyst 4948E-F switches,
More informationOPCOM RESEARCH LIMITED
OPCOM RESEARCH LIMITED Stag Farm Barn - Bedingham - Norfolk NR35 2DB - UK NOTE: The ODS-1800 is to be replaced by the ODS-2200 in 2016 ODS-1800 1.8 GHz Optical Data Acquisition Link Combining the best
More informationRM24100D. Introduction. 1 Features. 2.4GHz 100mW RS232 / RS485 / RS422 DSSS Radio Modem (IEEE compliant) Operating Manual English 1.
RM24100D 2.4GHz 100mW RS232 / RS485 / RS422 DSSS Radio Modem (IEEE 802.15.4 compliant) Operating Manual English 1.03 Introduction The RM24100D radio modem acts as a wireless serial cable replacement and
More informationR5 RIC Quickstart R5 RIC. R5 RIC Quickstart CONTENTS. Saab TransponderTech AB. Appendices. Project designation. Document title
Appendices 1 (10) Project designation R5 RIC Document title CONTENTS 1 Installation... 2 1.1 Connectors... 2 1.1.1 Power... 2 1.1.2 Video... 2 1.1.3 Sync... 3 1.1.4 RS232/ARP/ACP... 3 1.1.5 Radar data...
More informationRoHS Compliant 1310 nm Single-mode Transceiver (L1.1) 2 5, LC Duplex Connector, 3.3 V 155 Mbps ATM/SONET OC-3/SDH STM-1/Fast Ethernet
Features Compliant with 155 Mbps ATM and SONET OC-3 SDH STM-1 (L1.1) Industry standard 2 5 footprint LC duplex connector Single power supply 3.3 V Differential LVPECL inputs and outputs Compatible with
More informationRM868500D. Introduction. Features. 868MHz 500mW RS232 / RS485 / RS422 Radio Modem. Operating Manual English 1.01
RM868500D 868MHz 500mW RS232 / RS485 / RS422 Radio Modem Operating Manual English 1.01 Introduction The RM868500D radio modem acts as a wireless serial cable replacement and can wirelessly connect various
More informationDTR-xxx-3.3-SM-T. 3.3 Volt Single Mode Transceivers (1x9 pin-out) ! Single +3.3 V supply & LV-PECL data interface. ! Eye Safe (Class I Laser Safety)
OCP Description DTR-xxx-3.3-SM-T 3.3 Volt Single Mode Transceivers (1x9 pin-out) The DTR-xxx-3.3-SM-T fiber optic transceivers are the 3.3V power supply versions of our standard DTR-xxx-SM fiber optic
More informationDATASHEET 4.1. SFP+, 10GBase-ZR, Multirate Gbps, C Tunable, DWDM, C-Band, 50GHz, 22dB, 80km, ind. temp.
SO-SFP-10G-ZR-DWDM-I SFP+, 10GBase-ZR, Multirate 9.95-11.1 Gbps, C Tunable, DWDM, C-Band, 50GHz, 22dB, 80km, ind. temp. OVERVIEW The SO-SFP-10G-ZR-DWDM-I Tunable SFP+ Optical Transceiver is a full duplex,
More informationOC-48 LR-2/STM L-16.2 RoHS Compliant Pluggable SFP Transceiver
OC-48 LR-2/STM L-16.2 RoHS Compliant Pluggable SFP Transceiver PRODUCT FEATURES Up to 2.67Gb/s bi-directional data links Hot-pluggable SFP footprint Built-in digital diagnostic functions Uncooled 1550nm
More informationAudio & Data Transmission Solution FTA-108S FRA-108S
Audio & Data Transmission Solution FTA/ Inter-M has developed solutions such as FTA/ to transmit High quality uncompressed multi-channel audio and control over TCP/IP networks, dedicated copper lines and
More informationPLXDigi (v1.00) Instruction manual Configuration software manual
PLXDigi (v1.00) APRS STANDALONE DIGIPEATER MULTIPATH APRS DECODING ALGORITHM WEATHER STATION SUPPORT EXTERNAL TELEMETRY MODULE SUPPORT INPUT VOLTAGE MEASUREMENT SERIAL DEBUG INTERFACE FOR ADMINISTRATION
More informationUltrasonic Multiplexer OPMUX v12.0
Przedsiębiorstwo Badawczo-Produkcyjne OPTEL Sp. z o.o. ul. Morelowskiego 30 PL-52-429 Wrocław tel.: +48 (071) 329 68 54 fax.: +48 (071) 329 68 52 e-mail: optel@optel.pl www.optel.eu Ultrasonic Multiplexer
More informationCM /100/1000BASE-T
Lantech CM-121 10/100/1000BASE-T to 1000BASE-X Standalone Managed Media Converter User s Guide Version 0.94 Trademarks Contents subject to revision without prior notice. All trademarks remain the property
More informationDDS-PLL SYNTHESIZER DPL-2.5GF USER S MANUAL DIGITAL SIGNAL TECHNOLOGY, INC.
DDS-PLL SYNTHESIZER DPL-2.5GF USER S MANUAL DIGITAL SIGNAL TECHNOLOGY, INC. 1-7-3, HIGASHI BENZAI, ASAKA CITY SAITAMA 351-22 JAPAN TEL : 81-48-468-694 FAX : 81-48-468-621 http://www.dst.co.jp/en 1 DPL-2.5GF
More informationλ (nm) Power (dbm) SPS-9110V-1TG 1-TX 50 to to -5 LC SFP 0 to 70 Yes λ (nm) Power (dbm)
1310 nm / 3 Gb/s Medium Power Dual Optical SM Transmitter (RoHS ) **********************************************************************************************************************************************************************
More information10Gb/s DWDM Single-mode SFP+ Transceiver
Product Specification SFP+ DWDM 10G-ER 40km LC 10Gb/s DWDM Single-mode SFP+ Transceiver 1. Product Features Duplex LC connector Compliant with SFP+ MSA Compliant to 802.3ae 10GBASE-ER Compliant to SFP+
More information