EM14-14 mm Rotary Optical Encoder w/switch
|
|
- Colleen Carter
- 6 years ago
- Views:
Transcription
1 *ohs OMPINT eatures ead free HMOS, MOS and TT compatible ompact package size High rotational cycle life Standard or high force push switch option Optional detent Splashproof shaft seal ecommended for human/machine interface applications (HMI) able/connector option Optional bracket EM14-14 mm otary Optical Encoder w/switch Electrical haracteristics Electrical Output...2-bit quadrature code esolution...8 to 64 pulses per revolution (PP) Supply Voltage (V ) VD ± 0.25 VD Supply urrent (I )...26 m maximum Output Voltage ow (V E(sat) ), per hannel mv maximum at I (SINK) = 25 m High (V O(HI) ), per hannel VD V = 4.75 VD Output urrent I (SINK), per hannel...25 m minimum ise/all Time ns typical Power Dissipation mw maximum Pulse Width (per hannel) e typical Phase ngle (hannel eads hannel B, lockwise otation)...90 e ± 45 e Insulation 500 VD...1,000 megohms minimum Operating PM maximum Switch Power ating...12 VD / 20 m (600 ohms maximum load) Switch ontact esistance ohms maximum Environmental haracteristics Operating Temperature 5.0 VD to +70 (-40 to +158 ) Storage Temperature ange º to +125 º (-67 to +257 ) Vibration...15 G Shock...50 G Humidity...MI-STD-202, Method 103, ondition B lammability...onforms to U 94HB IP ating...ip 54* Mechanical haracteristics Mechanical ngle ontinuous Torque Starting/unning N-cm (1.5 oz.-in.) maximum Detent N-cm (1.7 oz.-in.) typical otational ife Non-detent (@ 30 PM)...1,000,000 cycles (2,000,000 revolutions) With detent (@ 30 PM)...100,000 cycles (200,000 revolutions) Switch ife...100,000 cycles Switch ctuation orce Standard gm (8.82 oz.) typical High orce gm (29.98 oz.) typical Switch Travel in. typical Shaft adial Play in. maximum Shaft xial Structural Strength...35 lbs. minimum Mounting Torque N-m (18 lb.-in.) maximum Materials and inishes Terminals...Sn plated P pins Soldering ondition Manual Soldering Sn/3.0g/0.5u solid wire or no-clean rosin cored wire 370 (700 ) max. for 3 seconds Wave Soldering Sn/3.0g/0.5u solder with no-clean flux 260 (500 ) max. for 5 seconds Wash processes...not recommended Mounting Hardware Nut...Black annodized brass, hex (metric)/nickel-plated brass, hex (SE) ockwasher...nickel-plated spring steel, internal tooth Marking...Manufacturer s symbol, model number, product code, terminal style and date code Standard Packaging...ntistatic plastic tube (25 pcs./tube) *When device is mounted by normal mounting means. *ohs Directive 2002/95/E Jan including nnex.
2 Part Numbering System E M D S EM14 MODE NO. DESIGNTO 14 mm otary Optical Encoder DESIGNTO 3/8 " D x 3/8 " Threaded 1/4 " D x 1/4 " Threaded 10 mm D x 9.5 mm Threaded 0 1 DETENT OPTION No Detent 32 Detents (vailable for 8 or 32 PP only) NTI-OTTION UG/BKET OPTION / ug B Bracket (No hardware/no cable or connector) D None SHT STYE (See Outline Drawing for Details) B E M 1/4 " Dia. Slotted End 1/4 " Dia. latted End 1/8 " Dia. Slotted End 6 mm Dia. Slotted End 6 mm Dia. latted End vailable w/ Bushing SHT ENGTH DESIGNTO ength (MS) 3/4 " 7/8 " 20 mm 25 mm vailable w/bushing,,, U, U S H N SWITH OPTION Push Switch (Standard) Push Switch (High orce) No Switch ESOUTION (Pulses Per evolution) 08 8 PP PP PP PP BE/ OPTION 0 No able/onnector 1 6 able with emale onnector and stripped/tinned leads 2 6 able with emale onnector on both ends 3 12 able with emale onnector and stripped/tinned leads 4 12 able with emale onnector on both ends TEMIN ONIGUTION xial Multi-Purpose Pin adial Multi-Purpose Pin able and onnector Options: H = 6 able with emale onnector and stripped/tinned leads H = 6 able with emale onnector on both ends H = 12 able with emale onnector and stripped/tinned leads H = 12 able with emale onnector on both ends or other cable and connector options, please contact the factory.
3 Product Dimensions MOUNTING SUE (.581) 8.00 (.315) (0.561) 4.76 (.187) MET SHT (SEE TBE O OPTIONS) (.395) 3.18 (.125) "" PIN STYE ± (.018 ±.001) X HIGH (.047) (.031) NTI-OTTION BOSS (OPTION) MET (SEE TBE O OPTIONS) 2.08 (.082) "" PIN STYE 1.52 (.060) "" PIN STYE 1.75 (.069) "" PIN STYE Shaft / lat ength Dimensions "" Style Bushing - latted Shafts "" Style Bushing - latted Shafts "" Style Bushing - Slotted Shafts (.374) (.060) 4.76 (.187) 3/8-32 UNE (.174) M10 x g 0.79 (.031) 1/4-32 UNE-2 SHT SHT ENGTH "" T ENGTH "" 7.94 (.313) SHT 6.0 (.236) 10.0 (.394) SHT ENGTH "" 20.0 (.787) 25.0 (.984) T ENGTH "" 7.0 (.275) 12.0 (.472) SHT SHT ENGTH "" "" Style Bushing - Slotted Shafts 1.8 (.071) "" Style Bushing - Slotted Shafts (.071) (.374) 0.99 (.040) 3/8-32 UNE (.040) M10 x g SHT SHT ENGTH "" SHT 6.0 (.236) 10.0 (.394) SHT ENGTH "" 20.0 (.787) 25.0 (.984)
4 able/onnector Options able ssembly, onnector on One End STIPPED ND TINNED 100 % MTTE TIN (.100) IBBON BE 6x28 WG x PITH PIN 1 - ED STIPE 8.0 (.315) 3.98 (.157) x (.236) (.039) x PITH EEPTE.457 O (.018) PINS 2.7 (.106) HDWE NUMBE H H DESIPTION BE SSEMBY, ON ONE END BE SSEMBY, ON ONE END DIM ± 5.0 (6.0 ±.197) ± 5.0 (12.0 ±.197) able ssembly, onnector on Both Ends IBBON BE 6x28 WG x PITH PIN 1 - ED STIPE x x (.236) (.039) x PITH EEPTE.457 O (.018) PINS H H BE SSEMBY, ON BOTH ENDS BE SSEMBY, ON BOTH ENDS ± 5.0 (6.0 ±.197) ± 5.0 (12.0 ±.197) Terminal onfigurations adial ±.13 (.590 ±.005) ±.25 (.581 ±.010) ±.25 (.597 ±.010) ecommended PB ayout 1.73 ±.10 (.068 ±.004) 2 PS ±.38 (.103 ±.015) (.676) 1.60 (.063) PB THIKNESS 1.5 (.059) WIDE X (.015) THIK 7.87 (.310) 1.24 (.049) GOUND HNNE MOMENTY SWITH.64 6 PS. (.025) HNNE B POWE 7.87 ±.08 (.310 ±.003) ±.13 (.050 ±.005) 5 PS. xial ±.25 (.590 ±.010) ecommended PB ayout (.575) 1.73 ±.10 (.068 ±.004) 2 PS ±.38 (.098 ±.015) (.676) (.416) 1.22 (.048) 6.25 (.246) 1.60 (.063) PB THIKNESS GOUND HNNE MOMENTY SWITH HNNE B POWE.64 (.025) 6 PS ±.08 (.246 ±.003) ±.13 (.050 ±.005) 5 PS.
5 Electrical Block Diagram Quadrature Output IED Ground hannel HNNE HNNE B High ow High ow 90 e ± 45 e 10k 1 Switch Terminal 180 e 1 pulse width 10k Opto SI 32 DETENT / 8 PP 2 Switch Terminal + Power HNNE B hannel B HNNE B 32 DETENT / 32 PP Terminal Diagram HNNE HNNE B HNNE "" GOUND HNNE "B" 12+B POWE MOMENTY SWITH Sensors & ontrols sia-pacific: TE X Europe: TE X The mericas: TE X EV. 08/07
EM14-14 mm Rotary Optical Encoder w/switch
*ohs OMPINT eatures ohs compliant* HMOS, MOS and TT compatible ompact package size rotational cycle life Standard or high force push switch option Optional detent EM14-14 mm otary Optical Encoder w/switch
More informationEMS22P - Non-Contacting PWM Encoder
*ohs COMPLIANT Features 3.3 and 5 VC voltage supply option PWM Absolute Position Bushing or servo mount Non-contacting magnetic technology Small size CMOS and TTL compatible esolution: 1024 states Long
More informationEMS22A - Non-Contacting Absolute Encoder
*RoHS COMPLIANT Features 3.3 and 5 VC voltage supply option Absolute Bushing or servo mount Non-contacting magnetic technology Small size CMOS and TTL compatible Resolution: 1024 positions Long life High
More information.152 (3.86) KEYWAY DEPTH .033 (.84).066 (1.68) .550 DIA (13.97) MOUNTING SURFACE .350 (8.89) 3/8-32 UNEF-2A THREADS (19.71.
SERIES 61K High Resolution, 4-Pin FEATURES 25, 32, 50, 64, 100, 128 and 256 Cycles per Revolution Available Sealed Version Available Rugged Construction Cable or Pin Versions 10 Million Rotational Life
More informationSeries 291 Optical Encoder
Electrocomponents Series 9 Optical Encoder Data Sheet Precision, Long-life Compact mm Size Optical Encoder Features Package Size ( X X 7 mm) Million life cycles (No detent) Million life cycles (With detent)
More informationDiameter Ø50mm Shaft Type Magnetic Multi-Turn Absolute Rotary Encoder MGAM50S B F PN 24
Ø0mm Shaft Magnetic Multi-Turn Absolute Type Diameter Ø0mm Shaft Type Magnetic Multi-Turn Absolute otary Encoder Features Higher resistant to vibration and impact by magnetic elements than optical encoder
More informationModel 97 & 99-5/8 Square Single-Turn Panel Control with Rotary Switch
*RoHS COMPLIANT Features Virtually infinite electrical circuit isolation Metal or plastic shaft options DPST and DPDT switch options RoHS compliant* Model 97 & 99-5/8 Square Single-Turn Panel Control with
More informationL25 Incremental Optical Encoder
L25 Incremental Optical Encoder The L25 is a lighter duty version of the H25. With low starting torque, a 1/4" diameter stainless steel shaft and a drawn aluminum cover. In most intances, the L25 encoder
More informationModel 25B-F/S/L Solid Shaft Low Line Incremental Optical Rotary Encoder
Model 25B-F/S/L Solid Shaft Low Line Incremental Optical Rotary Encoder DRC Encoder Up to 1250 line count disc Chrome on glass disc +/- 45 arc sec accuracy Optional internal 2X, 5X, or 10X cycle interpolation
More informationData Sheet for Angle Sensors
Up to 1024 pulses / 360 2 channels + index pulse Outputs TTL-compatible or as option linedriver Supply voltage 5 VDC Fast and simple to install, less than 19mm installation depth Upper limit frequency
More informationBourns Sensors & Controls Model EM14 Brochure
Bourns Sensors & Controls Model EM14 Brochure Sensors & Controls Bourns Model EM14 Product Description Bourns Model EM14 is a self-contained rotary optical encoder. It produces a 2-bit incremental quadrature
More informationPP300T060-ND. 3-Phase POW-R-PAK IGBT Assembly 300 Amperes/600 Volts
Powerex, Inc., 173 Pavilion Lane, Youngwood, Pennsylvania 15697 (724) 925-7272 www.pwrx.com 3-Phase POW-R-PK IGT ssembly T E K P (4 PLES) +D Q (7 PLES) PIN 1 F K L G F D J H D R +D -D P1 Outline Drawing
More informationG-Series Servomotors. AC Brushless Servomotors. Understanding the G-Series Servomotor Model Numbers
rushless Servomotors G-Series Servomotors ORME s G-series brushless servomotors provide high torque-to-inertia ratios and excellent continuous torque and peak torque performance in a compact design. These
More informationSERIES WW24 Industrial Wirewound Rotary Potentiometer 24mm Diameter / 5 Watts
SERIES WW4 Industrial wound Rotary Potentiometer 4mm Diameter / 5 Watts For more information about this product, visit our website at: www.potentiometers.com 5 watt @ 5 C / 4 watt @ 55 C power rating Dust-proof
More informationData Sheet for Precision Potentiometer
Electrical Data 3turn 5turn 1turn Effective electrical angle of rotation 1.) 18 ±5 18 ±5 36 ±5 Total resistance 1.) 2 Ohm..5 kohm 2 Ohm..1 kohm Resistance tolerance ±3% (±1%) Independent linearity (best
More informationD-Sub Connectors XM3. D-Sub Connectors That Are Ideal for Office Equipment Interfaces. Space-saving 9-pin Slim D-sub Socket Connectors for Boards
XM3 XM3 Series That re Ideal for Office quipment Interfaces Shielded against MI. ompact, robust connectors with metal shells. nchors and rounding ixtures are available. RoHS ompliant Slim Models Join the
More informationSeries PHD/Pendant Hand-held with E-Stop(2-Contacts) / Enable SW / Push Button SW capability
Series PHD/Pendant Hand-held with E-Stop(-Contacts) / Enable SW / Push utton SW capability -800-903-9093 FETURES New! -Contacts E-Stop SW (-Options are pre-wired) selection of wiring either or available
More informationOptions M-12 quick-disconnect connector. MTS (Machine Test Signal) Muting through RM-3 module Explosion-proof versions available
perimeter access guarding P00 ev..0 S S Description P00 Perimeter ccess Guarding Device Operating range of 0 m Three scan codes to eliminate cross-talk Short/long operating range selector switch esponse
More informationRemote Input/Output Terminal System (RITS) Connectors
Product Facts Termination by generic tools Small.0 mm [.079] centerline connectors Two contact points structure provides for high contact reliability Housing colors indicate applicable wire range omponent
More informationGeneral Specifications
eneral Specifications Electrical apacity (Resistive Load) Logic Level: 0.V maximum @ 8V /D maximum (pplicable Range 0.m ~ 0. @ 0mV ~ 8V) Note: See Supplement Index to find explanation of operating range.
More informationHX-EP SERIES DIGITAL OUTPUT
HX-EP SERIES DIGITAL OUTPUT Utilizing an incremental encoder as the sensor, the UniMeasure HX-EP series position transducer provides a two channel square wave current sinking output signal in quadrature.
More informationSwitches & Pilot Devices
ømm - HW Series Key features: ocking lever removable contact blocks Finger-safe IP0 contacts as standard, other terminal styles available Tamperproof construction All E-stops meet EN8 and are compliant
More informationMA3. Miniature Absolute Magnetic Shaft Encoder Page 1 of 8. Description. Order Using #MA3 starting at $36.00 per unit. Features
Page 1 of 8 Description The MA3 is a miniature rotary absolute shaft encoder that reports the shaft position over 360 with no stops or gaps. The MA3 is available with an analog or a pulse width modulated
More informationSeries 79 Micro-Crimp Section G: Right Angle Printed Circuit Board Connectors
Section : Right ngle Printed ircuit oard Receptacles With Pin ontacts, Right ngle Termination, 0-04P Lightweight, rugged right angle headers feature gold-plated contacts for thru-hole printed circuit board
More informationStandard Sendix 5000 / 5020 (shaft / hollow shaft) Push-Pull / RS422 / Open collector. Robust performance. Many variants
ue to their sturdy bearing construction in Safety-ock esign, the Sendix 5000 and 500 offer high resistance against vibration and installation errors. The rugged housing, high protection level of up to
More information22 22, 24, , 18, AWG. 50 ohm 50 ohm. 75 ohm 75 ohm. 95 ohm 95 ohm
ircular onnectors MR 4 Series onnectors General Information high density (.080 [2.0] contact centers), lightweight, subminiature, cylindrical connector series featuring crimp contacts and fingertip, push-pull,
More informationPhone: Fax: Web: -
ue to their sturdy bearing construction in Safety-ock esign, the Sendix 5000 and 500 offer high resistance against vibration and installation errors. The rugged housing, high protection level of up to
More informationD Subminiature Connectors
Subminiature onnectors Subminiature ontents The ITT annon Subminiature family of connectors has grown to include a wide variety of styles, options and accessories and is often the most economical solution
More informationOptical Kit Encoder Page 1 of 5. Description. Features
Description Page 1 of 5 The E5 Series rotary encoder has a molded polycarbonate enclosure with either a 5-pin or 10-pin latching connector. This optical incremental encoder is designed to easily mount
More informationRTBH Series 1-2 Pole Coded Rotary Switches Features/Benefits
RTBH Series 1-2 Pole Coded Switches Features/Benefits Totally sealed Detent angles, 15, 22.5, 30 and 36 Multi pole Coding functions Robust construction RoHS Compliant Typical Applications Telecommunications
More informationMA3. Miniature Absolute Magnetic Shaft Encoder Page 1 of 8. Description. Mechanical Drawing. Features
Description Page 1 of 8 The MA3 is a miniature rotary absolute shaft encoder that reports the shaft position over 360 with no stops or gaps. The MA3 is available with an analog or a pulse width modulated
More informationDG 60 L Incremental Encoder
Incremental Encoder Features Incremental encoder with 60 mm outer diameter ugged die-cast aluminum housing Quadrature output with reference marker, complementary output signals Protection to IP 67 Square
More informationMaterial: Weight: Bearing Life: Shaft Speed: Starting Torque: Mass Moment of Inertia: Shaft Loads:
Shaft Encoder - Ø 50 mm Shaft: Ø 6 mm to Ø 12 mm Resolution up to 12.500 ppr IP 65 (IP 67 option) Formerly named 2R or 2R-3L Automation / Electrical Specifications Code: Resolution: Supply Voltage: Voltage:
More informationHD25. Industrial Rugged Metal Optical Encoder Page 1 of 6. Description. Mechanical Drawing. Features
Description HD25 Page 1 of 6 The HD25 is a rugged optical incremental shaft encoder designed for heavy-duty industrial applications. The housing, machined from a solid billet aluminum block and finished
More informationB240, 2-Way, Characterized Control Valve Stainless Steel Ball and Stem
0, 2-ay, haracterized ontrol Valve Stainless Steel all and Stem pplication This valve is typically used in air handling units on heating or cooling coils, and fan coil unit heating or cooling coils. Some
More informationDistributed by: www.jameco.com 1-800-831-4242 The content and copyrights of the attached material are the property of its owner. HRPG Series Miniature Panel Mount Optical Encoders Data Sheet Description
More informationB250, 2-Way, Characterized Control Valve Stainless Steel Ball and Stem
250, 2-ay, haracterized ontrol Valve Stainless Steel all and Stem pplication This valve is typically used in air handling units on heating or cooling coils, and fan coil unit heating or cooling coils.
More informationLOW V CE(SAT) PNP SURFACE MOUNT TRANSISTOR
DPLS16 LOW V E(ST) PNP SURFE MOUNT TRNSISTOR NEW PRODUT Features Epitaxial Planar Die onstruction omplementary NPN Type vailable (DNLS16) Surface Mount Package Suited for utomated ssembly Lead Free/RoHS
More informationExpress Delivery. Axial. Connection
HIGH RESOLUTION INCREMENTAL SOLID SHAFT ENCODER FOR INDUSTRIAL APPLICATIONS Resolution up to 50.000 pulses per turn External diameter 58 mm Shaft from Ø 6 to 12 mm Protection class IP67 according to DIN
More informationHD - Incremental Encoders
Phased Array Sensor for Reliable Signal Output Rugged Design Withstands up to 400g Shock Unbreakable Code Disc up to 5000PPR Improved Seal Design for Increased Moisture Resistance NUMBER OF PULSES 0001
More information4 In This Chapter...
Specialty Module Specifications hapter In This hapter... P-HSI High-Speed Input Module Overview... HSI LE Indicators... HSI Input Specifications... HSI Status Output Specifications... Frequency Response...
More informationRotary Position Technology
Magnetic Rings LM-2 / RMT-2 High rotational speed IP High IP Shock/vibration resistant Reverse polarity protection Robust Increased ability to withstand vibrations and rough installation: Eliminates machine
More information.062 [1.57] Commercial Pin and Socket Connectors
.062 [1.57] ommercial Product Facts Polarized avity identification Low contact-mating force Dual locking lances Detent and positive locking ontacts available in brass and phosphor bronze with tin and gold
More informationID/HX-EP SERIES DIGITAL OUTPUT
ID/HX-EP SERIES DIGITAL OUTPUT Utilizing an incremental encoder as the sensor, the ID/HX-EP Series position transducer provides a two channel square wave current sinking output signal in quadrature. The
More informationMODEL S15 Incremental Optical Rotary Encoder
MODEL S15 Incremental Optical Rotary Encoder Up to 200 KHz frequency response all channels Small compact size: 1.51 diameter 1.00 dia. Bolt circle mount Resolutions up to 12,500 cycles / revolution ( 50,000
More informationAbsolute encoders multiturn
The Sendix M6 with Energy Harvesting Technology is an electronic multiturn encoder in miniature format, without gear and without battery. With a size of just 6 x 5 mm it offers a blind hollow shaft of
More informationsealed mini usb connectors
QUICK CONNECT CABLE END MATES WITH PANEL MOUNT PANEL MOUNT MATES WITH CABLE END REAR VIEW - PC TAIL REAR VIEW - FEED-THRU TERMINATION REAR VIEW - SOLDER HOLES SPECIFICATIONS Mechanical Specifications Life:
More informationGeneral Specifications
General Specifications Electrical apacity (Resistive Load) Power Level: 6A @ 25V A & 3A @ 250V A or 6A @ 30V Other Ratings ontact Resistance: Insulation Resistance: ielectric Strength: Mechanical Life:
More informationS46HD Series with LIMIT-SWITCHES
Values No. of Wire Turns Resistance Wire Used Resist. Value (Ω).5 2 5 2 5 2 5 46HD-3 46HD-5 46HD- 46HD-5 46HD-2 Resist. Wire Used 556 69 95,9,55 2,8 925,275,64 2,8 2,86 2, 2,5 3,8 4,35 2,53 3,22 4,6 5,7
More informationCam Positioner H8PR. Metal body, 2 m (6.56 ft.) cable
am Positioner Economical am Positioner Does the Work of p to am Switches Easy replacement of mechanical cam es with absolute encoder input ontrol outputs can be programmed to turn N/ in increments A single
More informationInput Voltage. Current Draw. Output. Resolution Internal Analog Output. Linearity. Repeatability. Hysteresis +/-.02% of Full Scale. Operating Pressure
BlueOx Magnetostrictive LDT for High Shock and Vibration Areas Gemco brand position sensing products have been known for survival in harsh industrial environments. We have taken over twenty years experience
More informationSeries. integrated Control Motor LINEAR SOLUTIONS MADE EASY
integrated ontrol Motor ELETROMATE LINEAR SOLUTIONS MADE EASY A What is a? The SmartActuator is a controller, drive and motor integrated with an actuator for an all-in-one solution. Tolomatic has over
More informationThe line driver option offers enhanced performance when the encoder is used in noisy environments, or when it is required to drive long distances.
Large Diameter (56 mm), Housed Two and Three Channel Optical Encoders Technical Data HEDL-65xx HEDM-65xx HEDS-65xx Series Features: Two Channel Quadrature Output with Optional Index Pulse TTL Compatible
More informationData Sheet for Angle Sensors
ETA25PM - R ETA25PM - F ETA25PM - TS 10 to 100-times longer life compared with multiturn potentiometers Free user programmable start and end position (electrical angle 10 up to 72000 ) Simple user programming
More informationSERIESN50, COAXIAL CONNECTORS
SERIESN50, COAXIAL CONNECTORS DESCRIPTION CONTENTS PAGE HUBER+SUHNER N connectors are available with 50 and 75 impedance. The frequency range extends to 18 GHz, depending on the connector and cable type.
More informationThe quadrature signals and the index pulse are accessed through five inch square pins located on 0.1 inch centers.
Quick Assembly Two and Three Channel Optical Encoders Technical Data HEDM-550x/560x HEDS-550x/554x HEDS-560x/564x Features Two Channel Quadrature Output with Optional Index Pulse Quick and Easy Assembly
More information9960 SERIES HALL EFFECT SENSOR
9960 SERIES HALL EFFET SENSOR Introduction Model 9960 Hall effect rotary position sensors are available in numerous standard configurations with fast, one week delivery. Available configurations include
More informationSE22 Mini Encoder Data Sheet 5V TTL power supply optical model
SE22 Mini Encoder Data Sheet 5V TTL power supply optical model 1 Description SE22 is a high performance, low cost, hollow shaft encoder family, very easy for assembly on shaft diameters set ranging from
More informationDiameter ø50mm Shaft type Absolute Multi-turn Rotary Encoder
Dia ø50mm Shaft type Absolute Multi-turn otary Encoder Features Compact size of dia ø50mm Parallel data / SSI data transmission type Total 23bit resolution(8388608 divisions) of 10bit single-turn(1024
More informationIncremental encoders Blind or through hollow shaft ø12 mm pulses per revolution
Blind or through hollow shaft ø mm...5 pulses per revolution Features Encoder with blind or through hollow shaft ø mm Optical sensing method Max. 5 pulses per revolution Small profile depth Versatile mounting
More informationData Sheet. HEDL-65xx, HEDM-65xx, HEDS-65xx Series Large Diameter (56 mm), Housed Two and Three Channel Optical Encoders. Description.
HEDL-65xx, HEDM-65xx, HEDS-65xx Series Large Diameter (56 mm), Housed Two and Three Channel Optical Encoders Data Sheet Description The HEDS-65xx/HEDL-65xx are high performance two and three channel optical
More informationResistance WIREWOUND. Wiper Travel NO. OF TURNS 0.5 W 25 ± 2
Vishay Foil esistors Bulk Metal Foil Ultra High Technology Precision Trimming Potentiometers, / 4 " ectilinear, J Style, Designed to Meet or Exceed The equirements of MIL-PF-097, Char. F with Smooth and
More information242, , FAX.
TEL. 886 2 8994 1601, AX. 886 2 8994 1602 sales@rfconnector.com.tw, www.rfconnector.com.tw General Information Subminiature Connectors Subminiature Connectors Snap Lock 50 Ω 18 GHz 50 Ω 75 Ω 4 GHz 3 GHz
More informationHeavy Duty Push-pull / RS422 / speed switch. RoHS 2/22. Magnetic field proof. XXXX e
Sendix H00 (shaft) The Sendix encoder H00 is an extremely rugged available in 3 versions: encoder with or without speed switch and double encoder. Thanks to the special HD-Safety-Lock construction it is
More informationF650HD, 2-Way Butterfly Valve Resilient Seat, 304 Stainless Steel Disc
650H, -Way utterfly Valve Resilient Seat, 304 Stainless Steel isc Product eatures 00 psi ( to ) and 50 psi (4 to 4 ) 0% leakage, Long stem design allows for insulation, Valve face-to-face dimensions comply
More informationRoHS. High shaft load capacity. Shock / vibration resistant
Due to their sturdy bearing construction in Safety Lock Design, the Sendix 5000 and 5020 offer high resistance against vibration and installation errors. The rugged housing, high protection level of up
More informationAbsolute encoders multiturn
Sendix M / M8 (shaft / hollow shaft) The Sendix M with Energy Harvesting Technology is an electronic multiturn encoder in miniature format, without gear and without battery. With a size of just x mm it
More informationGeneral Specifications
Series M00 Snap-ction Pushbuttons Supplement ccessories Indicators Touch Tilt Tactiles Slides Rotaries Keylocks Programmable Illuminated P Pushbuttons Rockers Toggles eneral Specifications lectrical apacity
More informationSHAFTED ROTARY POSITION SENSORS
J8 / J0 / J0 / J30 Shafted ; Brief / of 2 Joral REF S; I / J LINE ENCODERS Joral manufactures shafted rotary position sensors for the market of controls, power equipment, hydraulics, and off road vehicles.
More informationDistributed by: www.jameco.com 1-800-831-4242 The content and copyrights of the attached material are the property of its owner. FEATURES AND SPEIFIATIONS Features and Benefits Board-mounting pegs provide
More informationQUANTUM DEVICES,INC. QPhase ISO 9001 DESCRIPTION TYPICAL APPLICATIONS DESIGN FEATURES
QUANTUM DEVICES,INC. Improving the Quality of Life through the Power in Light QPhase DESCRIPTION Quantum Devices, Inc. Model QDH20 provides an improved feedback solution in applications typically using
More informationOptical encoder MEC22 HR
Optical encoder MEC22 HR Description The MEC22 HR is a high resolution optical hollow shaft encoder that can be fixed quickly and easily on different sizes of motor shafts. The encoder provides two square
More informationMulti Function Timer with Free power, Compact size W38 H42mm
Multi Function with Free power, ompact size W8 H4mm Features Wide power supply range : 100-40VA 50/0Hz, 4-40VD (universal), 4VA 50/0Hz / 4VD (universal), 1VD Various output operations( operation modes)
More informationCALL (512 ) x6400
The AirBorn stackable compliant connector family is one of AirBorn s solutions for high-density, board-to-board stacking applications. This connector family is available in 0.075 contact spacing and 100
More informationEncoders. Up-to-date price list: FREE Technical Support:
Up-to-date price list: www.automationdirect.com/pricelist FREE Technical Support: www.automationdirect.com/support FREE Videos: www.automationdirect.com/videos FREE Documentation: www.automationdirect.com/documentation
More informationP3-HSI High Speed Isolated Sinking/Sourcing Input
To minimize the risk of potential safety problems, you should follow all applicable local and national codes that regulate the installation and operation of your equipment. These codes vary from area to
More informationOnline data sheet. DFS60S-S1OC01024 DFS60S Pro SAFETY ENCODERS
Online data sheet DFS60S-S1O01024 DFS60S Pro D E F Illustration may differ Ordering information Type Part no. DFS60S-S1O01024 1069517 Other models and accessories www.sick.com/dfs60s_pro H I J K L M N
More information60 115V /
- GEMOOS.C. Gearmotors PHE:.. FX:.. WWW.SDP-SI.COM Size Voltage ated orque N m ated Speed rpm Page V.- / - D.C. Gearmotors - Motor Specifications Size Voltage ated orque N mm ated Speed rpm Page V V.V
More informationhigh speed RACk & PANeL connectors
high speed Rk & PNeL connectors technical characteristics specifications temperature rating: -55 c to + 5 c corrosion: MIL-STD-0 Method 0, Test ondition shock: MIL-STD-0 Method, Test ondition Vibration:
More informationOptical Kit Encoder Page 1 of 11. Description. Mechanical Drawing. Features
Description Page 1 of 11 The E3 is a high resolution rotary encoder with a molded polycarbonate enclosure, which utilizes either a 5-pin locking or standard connector. This optical incremental encoder
More informationEMI Filtered Connectors from performance to board space, to cost, we offer many reasons and options for managing EMI at the signal & power I/O
MI ed onnectors from performance to board space, to cost, we offer many reasons and options for managing MI at the signal & power I/O Series errite ed onnectors offer a low cost, space saving solution
More information300 ma max. 2 mm ,8 mm. ±1 mm. ±1 Digit. A, A, B, B / signal Z, Z (optional) / status signal ERR (optional) Zinc die casting IP67
Variant e: PMIS4, PMIR 7, PM IR7N POSIROT Magnetic incremental encoder Magnetic wheels for rotative applications All metal housing Protection class IP67 Excellent protection of the active measurement area
More informationMEDER electronic. DIL Series DESCRIPTION FEATURES CHARACTERISTICS. DIMENSIONS All dimensions in mm [inch] ORDER INFORMATION
kvd Breakdown Option DESRIPTION Several pin out options are possible with the 14 pin DIL series. Suitable for telecommunication applications where breakdown voltages up to 4.25 kvd is required. FEATURES
More informationJR12 Jam Nut Mount Optical Encoder
Improving the Quality of Life through the Power in Light JR12 Jam Nut Mount Optical Encoder QPhase Design Features: Replaces Size 15 Pancake Resolver Bearing design simplifies encoder attachment Resolutions
More informationAKS17 Absolute Magnetic Encoder
Measuring Positioning KS17 bsolute Magnetic Encoder - or rotary applications - or linear applications - or 3 track magnetic scales eatures 21 to 24 it absolute resolution 16 it incremental resolution Small
More informationIncremental encoders Blind hollow shaft or cone shaft pulses per revolution
Features TTL output driver for cable length up to 550 m Very high resistance to shock and vibrations Hybrid bearing for extended service life Shaft insulation up to.8 kv Large terminal box, turn by 80
More informationPKG-232-MBC12-PS-CBL System Diagram and Specifications
PKG-232-MBC12-PS-CBL System Diagram and Specifications Included Components: 23Y206S-LW8-MS Stepper Motor MBC12101 Stepper Driver PSA80V4A-1 Power Supply CBL-18AWG-04C-010-MS Motor Cable WIR-1007-18-YEL
More informationQR12. Output. A = Line Driver B = Line Driver ABZ/ Open Collector UVW C = Sin/Cos/ Line Driver UVW D = Sin/Cos/Open Collector UVW
QR12 DESIGN FEATURES Low profile assembled height of 0.99" Bearing design simplifies encoder attachment Resolutions up to 20,000 lines per revolution SIN/COS outputs available up to 1250 LC 4, 6 or 8 pole
More informationPOST REFLOW HEIGHT DIMENSIONS
MEDER electronic RM Series 4 input / 2 output DESRIPTION The RM05-4A-S-4/2 and RM05-2A2B-S-4/2 are low-profile 4 input / 2 output Relay Modules with an FR-4 substrate and rugged thermoset epoxy overmold.
More informationPT8232 Cable Actuated Sensor Industrial RS232
PT8232 able ctuated Sensor Industrial RS232 bsolute Linear Position to 60 inches (1524 mm) luminum or Stainless Steel Enclosure Options VLS Option to Prevent FreeRelease amage IP68 / NEM 6 GENERL 3.6 [91
More informationAKS16 Absolute Magnetic Sensing Head
Measuring Positioning KS16 bsolute Magnetic Sensing ead - Rotary applications - Linear applications - Non-contact, quick position measurement eatures Lower case incremental 16 to 18 it absolute resolution
More informationadmotec R O T A S Y N S O L I D R O T O R R E S O L V E R TYPICAL APPLICATIONS
O O T S Y N S O L I D O T O E S O L V E Solid rotor, variable reluctance, frameless, brushless resolvers for severe applications. dmotec O Series otasyn variable reluctance frameless resolvers provide
More informationPRESSURE TRANSDUCERS. Specifications. Integral Connector Versions
GMS OMPLINT 00 Series and 00 Heavy Duty Series ompact OM Pressure Transmitters xceptional Long Term Stability 0-00 psi to 0-0,000 psi Ranges (0- bar to 0-,00 bar) High Proof Pressures with ll Stainless
More informationEC35. Optical Commutation Kit Encoder Page 1 of 7. Description. Mechanical Drawing. Features
Page 1 of 7 Description The EC35 quick assembly optical commutation encoder is designed for high volume, low cost, OEM motion control applications. The EC35 provides A/B/Z incremental outputs and U/V/W
More informationRotary Position Technology Incremental Encoders
-40 to 80 C Temperature Shock/vibration resistant Short-circuit protected Reverse polarity protection High rotational speed Rugged Balanced, stainless-steel clamping rings, special bearing-shaft connection
More informationCompact CANopen. RoHS 2/22. Shock / vibration resistant. High shaft load capacity e
The Sendix M36 with Energy Harvesting Technology is an electronic encoder in miniature format, without gear and without battery. It is characterized by robustness, reliability and cost-efficiency. pending
More informationF4-04ADS 4-Channel Isolated Analog Input
F4-4ADS 4-hannel Isolated Analog 4 F4-4ADS 4-hannel Isolated Analog Module Specifications The F4-4ADS 4-hannel Isolated Analog module provides several features and benefits. It accepts four differential
More informationDESCRIPTION CHARACTERISTICS FEATURES DIMENSIONS. Molded DIP Reed Relays. Germany # ++49-(0) , USA #
DESRIPTION The DIP series is a very compact design having a low profile package and a high profile package. This series is compatible with all DIP relays. HARATERISTIS FEATURES High resistance option available
More informationSection 11 Electronic Position Controls & Encoders
APC-2006 All Products Catalog Section Electronic Position Controls & Encoders Force Control Industries, Inc. Main Office and Manufacturing Plant 3660 Dixie Highway Fairfield, Ohio 45014 Telephone: (513)
More informationF680HD, 2-Way Butterfly Valve Resilient Seat, 304 Stainless Steel Disc
680H, 2-Way utterfly Valve Resilient Seat, 304 Stainless Steel isc Product eatures 200 psi (2 to 12 ) and 150 psi (14 to 24 ) 0% leakage, Long stem design allows for 2 insulation, Valve face-to-face dimensions
More information