1SA-1V. Single-Axis Magnetic Sensor ASIC. 1SA-1V preliminary September 2002

Size: px
Start display at page:

Download "1SA-1V. Single-Axis Magnetic Sensor ASIC. 1SA-1V preliminary September 2002"

Transcription

1 September SA-V Single-Axis Magnetic Sensor ASIC Features: Sensitive to a magnetic field parallel with the chip surface Very high magnetic sensitivity Analog and digital output voltages Very low offset and offset-drift Very low noise Gain and offset programming Applications: Low Magnetic Field Measurement Contactless Distance Measurement DC to khz Current Sensing Magnetic Proximity Switch General Description The SA-V is a single-axis integrated magnetic field sensor based on the Hall effect. The circuit is fabricated using a conventional CMOS technology with an additional ferromagnetic layer. The ferromagnetic layer is used as a magnetic flux concentrator providing a high magnetic gain. Therefore, the circuit features very high magnetic sensitivity, low offset, and low noise. Moreover, the magnetic sensitivity, the residual offset, and their temperature coefficients can be altered by programming. The sensor SA-V provides two output signals: one is a precise analog voltage directly proportional to the magnetic field; the other is a digital signal being switched-on or switched-off at the presence of a sufficient magnetic field. The V-version of the SA- is optimized for applications where a high saturation limit of the measured field is required. During the manufacturing process or after customer installation, sensor parameters like sensitivity, offset and temperature coefficient can be one-time programmed. (Either programmed or unprogrammed sensors can be orderd.) Therefore, the circuit features a wide application range and very high accuracy. Page of 7 Sentron AG Baarerstrasse 7 6 Zug Switzerland Phone: + () 7 7 Fax: + () 7 88

2 September Package: SOIC-8 Pin Out: B. PV, programming voltage. GND. PD, programming data. PC, programming clock. D_OUT, digital output switch 6. CO_OUT, common output 7. A_OUT, analog output sensor 8. VDD Note: Also available in chip form Absolute Maximum Ratings Symbol Parameter Min. Typ. Max. Unit Remarks V SUP Supply Voltage 6 V V SUP T Ambient Temperature - + o C T Recommended Operating Conditions Symbol Parameter Min. Typ. Max. Unit Remarks V SUP Supply Voltage.. V I OUT Output Current - ma I Dout Output Current Switch ma Magnetic Switch C L Load Capacitance pf Electrical Characteristics At T=- C to C, VSUP=.V to.v if not otherwise specified. Symbol Parameter Min. Typ. Max. Unit Test Conditions I SUP Supply Current 6 ma V Common Common (reference) V SUP / V SUP / V SUP / I OUT =ma Output Voltage ) -mv +mv BW Bandwidth: DC to khz ) Ratiometric Page of 7 Sentron AG Baarerstrasse 7 6 Zug Switzerland Phone: + () 7 7 Fax: + () 7 88

3 September Characteristics of the Linear Magnetic Field Sensor With V SUP = V and in the temperature range - o C to o C, if not otherwise specified. I =ma Symbol Parameter Min. Typ. Max. Unit Test Conditions S Magnetic G= 8 Sensitivity,) G= 6 V/T S/S T Magn. Sensitivity -.. %/ C Temperature Drift ) OUT T=- C to C Voff Offset Voltage,) - mv B=T, Iout=mA, T= C, S=V/T Boff Equivalent Magnetic Offset,6) - µt B=T, I OUT =ma T=- C to 8 C Voff/ T Offset Temperature Drift -.. mv/ C B=T, I OUT =ma, T=- C to C S=V/T B FS Full Scale Magnetic Field Range mt S=V/T S=V/T B L Linear Magnetic Field Range - - mt S=V/T S=V/T NL Non Linearity.. B=+/-mT %. B=+/-mT Bnoise Input referred magnetic noise spectrum density (RMS) nt/ Hz f=hz to khz ) Ratiometric (proportional to V SUP ) ) Programmable in 6 steps of about.v/t between G= and G= ) Programmable in 7 steps of about. %/ C ) Programmable in steps of mv (@G=) 6) Programmable in steps of about µt (@G=) Magnetic Characteristics of the Magnetic Switch 7) With V SUP =V and in the temperature range - o C to o C, if not otherwise specified. Symbol Parameter Min. Typ. Max. Unit Test Conditions B OP Magnetic Threshold Turn-On 8,9)... mt T= o C S=V/T B RP Magnetic Threshold Turn-Off 8,9) mt T= o C S=V/T B OP - B RP Hysteresis 8,9)...6 mt T= o C 7) When the digital output pin is used 8) Increases up to the factor of by decreasing the magnetic sensitivity 9) Ratiometric (proportional to V SUP ) Page of 7 Sentron AG Baarerstrasse 7 6 Zug Switzerland Phone: + () 7 7 Fax: + () 7 88

4 September Block Diagram VDD Hall Element System Offset Cancellation Amplifier Buffer & Filter A_OUT analog (differential) Schmitt Trigger CO_OUT D_OUT digital (single ended) Biasing Unit Programming Unit GND PV PC PD Hysteresis of Magnetic Switch (S=V/T) Hysteresis of Magnetic Switch output voltage magnetic switch [V]... B RP = -.mt B OP =.mt Turn On Turn Off magnetic field [mt] Page of 7 Sentron AG Baarerstrasse 7 6 Zug Switzerland Phone: + () 7 7 Fax: + () 7 88

5 September Package Information SOIC-8 B: Magnetic sensitive direction B Dimension and Pads SA- in dice form (all dimensions in µm) 9 VDD 9 B A_OUT PV GND PD PC D_OUT CO_OUT Page of 7 Sentron AG Baarerstrasse 7 6 Zug Switzerland Phone: + () 7 7 Fax: + () 7 88

6 September Programming the Sensor Parameters This is an overview of the programming capabilities of the SA- sensor. For detailed information, please read the document Programming Instruction SA- with examples and supporting info. Sensitivity According to the application specific magnetic field strength, the sensitivity of the SA- can be programmed and ranges from S= to S=V/T (Gain= to ) by 6 Bits. Field B [mt] Sensitivity [V/T] Gain < < * for B >mt the sensor output becomes less linear, but the sensor can still be used Offset Compensation Sensor and application offsets such as mechanical and geometrical tolerances can be compensated by programming. Programmable Offset Compensation is performed by Bits in mv steps. Temperature Coefficient Sensor and application temperature drifts can be compensated by programming. Programmable Temperature Coefficient ranges from ppm/k to ppm/k in steps of ppm/k by Bits. Page 6 of 7 Sentron AG Baarerstrasse 7 6 Zug Switzerland Phone: + () 7 7 Fax: + () 7 88

7 September Typical Applications. Angular Position Sensing using a Multipole Magnet S N S N The SA- is mounted in the vicinity outside a multipole magnet rotating on an axis. If the distance between magnet and chip center is about the pole distance on the magnet, then the SA- yields a sine-shape signal, which is transformed into a rectangular pulse signal by the digital output. Analog Output [V] Analog Output Angle [ ] Digital Output [V] 6 - Digital Output Angle [ ]. Position Switch using a Dipole Magnet Displacement The SA- is mounted underneath a small dipole magnet with its magnetization axis perpendicular to the chip surface. When the magnet moves along a line parallel to the axis of sensitivity of the SA-, the analog output of the SA- changes its sign. The digital output is V on one side an V on the other. Around the center the digital output shows a hysteresis between Bop and Brp of about. mt which (for the given example) corresponds to a mechanical hysteresis of about.mm. Analog Output [V] Analog Output Displacement [mm] Digital Output [V] Digital Output - - Displacement [mm] Digital Output [V] Switching Hystere sis Displacement [mm] Analog Output [V] Page 7 of 7 Sentron AG Baarerstrasse 7 6 Zug Switzerland Phone: + () 7 7 Fax: + () 7 88

Please find the latest version of this datasheet and related information such as application notes on our website

Please find the latest version of this datasheet and related information such as application notes on our website CSA-1V Current Sensor Features: Sensitive to a magnetic field parallel to the chip surface Very high sensitivity Linear output voltage proportional to a magnetic field Wide -band: DC to 100kHz Very low

More information

GMW. Integrated 2-Axis Hall Sensor

GMW. Integrated 2-Axis Hall Sensor 2SA-10 Integrated 2-Axis Hall Sensor Features Measures two components of a magnetic field at the same spot. Excellent matching of sensitivity along the two axes. Max. angle error from 40 C..+150 C: < 1

More information

IMC-Hall Current Sensor

IMC-Hall Current Sensor CSA-1V IMC-Hall Current Sensor Features: IMC-Hall technology - Very high sensitivity due to integrated magnetic concentrator Sensitive to a magnetic field parallel to the chip surface Linear output voltage

More information

Programming Instructions

Programming Instructions Programming Instructions SA- Integrated -axis Hall Sensor General During the manufacturing process or after customer installation, sensor parameters like sensitivity, mismatch of sensitivity and phase

More information

Table of Contents 1 Functional diagram General description Glossary of Terms Maximum ratings Pin definitions and descripti

Table of Contents 1 Functional diagram General description Glossary of Terms Maximum ratings Pin definitions and descripti Features and Benefits Triaxis Hall Technology Sensitive to a magnetic field parallel to the chip surface Very high sensitivity Linear output voltage proportional to a magnetic field Wideband: DC to 100kHz

More information

MT1531 Series. CMOS, Programmable Linear Hall Effect Sensor. Features. Applications. 1 / 15

MT1531 Series. CMOS, Programmable Linear Hall Effect Sensor. Features. Applications.  1 / 15 Features Specified Operating Voltage Range Single supply voltage 4.5-5.5V Functions up to 7.0V Specified Operating Temperature Range From 40C up to 150C Linear Output with High Accuracy 12-bit Ratiometric

More information

HAL , 508, 509, HAL Hall Effect Sensor Family

HAL , 508, 509, HAL Hall Effect Sensor Family MICRONAS INTERMETALL HAL1...6, 8, 9, HAL16...18 Hall Effect Sensor Family Edition April Feb. 4, 16, 1996 1999 61-36-1DS 61-48-1DS MICRONAS HALxx Contents Page Section Title 3 1. Introduction 3 1.1. Features

More information

MT4106-EN Series Uni-polar, Hall-Effect Magnetic Position Sensors

MT4106-EN Series Uni-polar, Hall-Effect Magnetic Position Sensors Features and Benefits BCD Technology Magnetic Switch Type: Uni-polar Wide Operating Voltage Range: Supply Voltage 2.8~24V Specified Operating Temperature Range:-40 ~150 High Magnetic Sensitivity B OP =140Gauss,

More information

I1A Magnetic Field Transducers

I1A Magnetic Field Transducers DESCRIPTION: The I1A denotes a range of SENIS Magnetic Fieldto-Voltage Transducers with integrated 1-axis Hall Probe. It measures magnetic fields perpendicular to the probe plane (By). The Hall Probe contains

More information

High Sensitivity Differential Speed Sensor IC CYGTS9625

High Sensitivity Differential Speed Sensor IC CYGTS9625 High Sensitivity Differential Speed Sensor IC CYGTS9625 The differential Hall Effect Gear Tooth sensor CYGTS9625 provides a high sensitivity and a superior stability over temperature and symmetrical thresholds

More information

HAL400, HAL401 Linear Hall Effect Sensor ICs

HAL400, HAL401 Linear Hall Effect Sensor ICs PRELIMINARY DATA SHEET MICRONAS INTERMETALL HAL, HAL Linear Hall Effect Sensor ICs Edition June 9, 998 65-6-PD MICRONAS HAL, HAL PRELIMINARY DATA SHEET Linear Hall Effect Sensor ICs in CMOS technology

More information

F3A Magnetic Field Transducers

F3A Magnetic Field Transducers DESCRIPTION: The F3A denotes a range of SENIS Magnetic Fieldto-Voltage Transducers with fully integrated 3-axis Hall Probe. The Hall Probe contains a CMOS integrated circuit, which incorporates three groups

More information

TLE4990 TLE4990-E6782

TLE4990 TLE4990-E6782 Data Sheet, V 2.4, November 2005 TLE4990 TLE4990-E6782 Programmable Linear Output Hall Sensor Sensors Edition 2005-11 Published by Infineon Technologies AG, St.-Martin-Strasse 53, 81669 München, Germany

More information

HAL , 508, 509, HAL , 523 Hall Effect Sensor Family MICRONAS. Edition Feb. 14, E DS

HAL , 508, 509, HAL , 523 Hall Effect Sensor Family MICRONAS. Edition Feb. 14, E DS MICRONAS HAL1...6, 8, 9, HAL16...19, 23 Hall Effect Sensor Family Edition Feb. 14, 21 621-19-4E 621-48-2DS MICRONAS HALxx Contents Page Section Title 3 1. Introduction 3 1.1. Features 3 1.2. Family Overview

More information

F1A Magnetic Field Transducers

F1A Magnetic Field Transducers DESCRIPTION: The F1A denotes a range of SENIS Magnetic Fieldto- Voltage Transducers with fully integrated 1-axis Hall Probe. It measures magnetic fields perpendicular to the probe plane (By). The Hall

More information

CYD8945 High Reliability Hall Effect Switch IC

CYD8945 High Reliability Hall Effect Switch IC CYD8945 High Reliability Hall Effect Switch IC The CYD8945 Hall-Effect switch, produced with ultra-high voltage bipolar technology, has been designed specifically for automotive and industrial applications

More information

MH 249 CMOS High Sensitivity Omni-polar Hall Switch

MH 249 CMOS High Sensitivity Omni-polar Hall Switch MH 249 Hall-effect sensor is a temperature stable, stress-resistant switch. Superior high-temperature performance is made possible through a dynamic offset cancellation that utilizes chopper-stabilization.

More information

A Novel Contact-less Current Sensor for HEV/EV and Renewable Energy Applications

A Novel Contact-less Current Sensor for HEV/EV and Renewable Energy Applications Melexis Hall Presentation A Novel Contact-less Current Sensor for HEV/EV and Renewable Energy Applications ROR-MLX Contact-less Current Sensing Melexis markets a patented Hall technology under the brand

More information

MLX Degrees Hi-Speed Rotary Position Sensor (Sine/Cosine) Features and Benefits. Applications. Ordering Code

MLX Degrees Hi-Speed Rotary Position Sensor (Sine/Cosine) Features and Benefits. Applications. Ordering Code Features and Benefits Absolute Rotary Position Sensor IC Tria is Hall Technology Hi-Speed Operation Sine/Cosine Outputs Simple & Robust Magnetic Design Excellent Thermal Stability Very Low Hysteresis SOIC-8

More information

HAL621, HAL629 Hall Effect Sensor Family MICRONAS. Edition Feb. 3, DS MICRONAS

HAL621, HAL629 Hall Effect Sensor Family MICRONAS. Edition Feb. 3, DS MICRONAS MICRONAS HAL61, HAL69 Hall Effect Sensor Family Edition Feb., 651-54-1DS MICRONAS Contents Page Section Title 1. Introduction 1.1. Features 1.. Family Overview 4 1.. Marking Code 4 1.4. Operating Junction

More information

MH 249 CMOS High Sensitivity Omni-polar Hall Switch α version

MH 249 CMOS High Sensitivity Omni-polar Hall Switch α version MH 249 Hall-effect sensor is a temperature stable, stress-resistant switch. Superior high-temperature performance is made possible through a dynamic offset cancellation that utilizes chopper-stabilization.

More information

Cosemitech. Automotive Product Group. FEATURES and FUNCTIONAL DIAGRAM

Cosemitech. Automotive Product Group. FEATURES and FUNCTIONAL DIAGRAM FEATURES and FUNCTIONAL DIAGRAM AEC-Q100 automotive qualified Digital Omnipolar-Switch Hall Sensor Superior Temperature Stability Multiple Sensitivity Options (BOP / BRP): ±25 / ±15 Gauss; ±70 /±35 Gauss;

More information

SW REVISED DECEMBER 2016

SW REVISED DECEMBER 2016 www.senkomicro.com REVISED DECEMBER 2016 Chopper Stabilized, Precision Hall Effect Latches for Consumer and Industrial Applications FEATURES AND BENEFITS Symmetrical Latch switch points Resistant to physical

More information

MT1531 CMOS, Programmable Linear Hall Effect Sensor

MT1531 CMOS, Programmable Linear Hall Effect Sensor 1. Overview Features Specified Operating Voltage Range: -Single supply voltage 4.5-5.5V -Functions up to 7.0V Specified Operating Temperature Range: -From 40C up to 150C Linear Output with High Accuracy:

More information

LIS2L02AQ. INERTIAL SENSOR: 2Axis - 2g/6g LINEAR ACCELEROMETER 1 FEATURES 2 DESCRIPTION. Figure 1. Package

LIS2L02AQ. INERTIAL SENSOR: 2Axis - 2g/6g LINEAR ACCELEROMETER 1 FEATURES 2 DESCRIPTION. Figure 1. Package INERTIAL SENSOR: 2Axis - 2g/6g LINEAR ACCELEROMETER 1 FEATURES 2.4V TO 5.25V SINGLE SUPPLY OPERATION 0.5mg RESOLUTION OVER 100Hz BW 2g/6g USER SELECTABLE FULL-SCALE OUTPUT VOLTAGE, OFFSET AND SENSITIVITY

More information

MT1401A-T Flat TO-92 package, Radial lead, bulk packaging (1000pcs/bag)

MT1401A-T Flat TO-92 package, Radial lead, bulk packaging (1000pcs/bag) Features and Benefits CMO Technology Magnetic Type: Latch Wide Operating Voltage Range: upply Voltage 2.8~18V pecified Operating Temperature Range: From 40 ~125 High Magnetic ensitivity Bop=20Gauss, Brp=-20Gauss

More information

HAL , 508, 509, HAL , 523 Hall Effect Sensor Family

HAL , 508, 509, HAL , 523 Hall Effect Sensor Family Hardware Documentation Data Sheet HAL 1...6, 8, 9, HAL 16...19, 23 Hall Effect Sensor Family Edition Nov. 27, 23 621-48-4DS HALxx DATA SHEET Contents Page Section Title 3 1. Introduction 3 1.1. Features

More information

The differential Hall Effect sensor SC9625 provides a high sensitivity and a superior stability over

The differential Hall Effect sensor SC9625 provides a high sensitivity and a superior stability over Features Integrated filter capacitor South and North pole pre-induction possible Larger air gap 9625 3.8 to 24V supply operating range Wide operating temperature range Output compatible with both TTL and

More information

MP72X High Sensitivity Hall Latch

MP72X High Sensitivity Hall Latch High Sensitivity Hall Latch Revision 0.2 1. Overview Features Wide Operating Voltage Range: -Single supply voltage 3.5-24V Specified Operating Temperature Range: -From 40C up to 125C High Magnetic Sensitivity

More information

Current transducer FHS 40-P/SP600

Current transducer FHS 40-P/SP600 Current transducer I PM = 0-100 A Minisens transducer The Minisens transducer is an ultra flat SMD open loop integrated circuit current transducer based on the Hall effect principle. It is suitable for

More information

H3A Magnetic Field Transducer

H3A Magnetic Field Transducer DESCRIPTION: The H3A denotes a range of Low Noise SENIS Magnetic Field-to-Voltage Transducers with hybrid 3- axis Hall Probe. The Hybrid Hall Probe integrates three highresolution with good angular accuracy

More information

I1A Magnetic Field Transducers Very Low Noise & Offset Magnetic Transducers with Integrated 1-axis (Y) Hall Probe DESCRIPTION: The I1A denotes a range

I1A Magnetic Field Transducers Very Low Noise & Offset Magnetic Transducers with Integrated 1-axis (Y) Hall Probe DESCRIPTION: The I1A denotes a range DESCRIPTION: The I1A denotes a range of SENIS Magnetic Fieldto-Voltage Transducers with integrated 1-axis Hall Probe. It measures magnetic fields perpendicular to the probe plane (By). The Hall Probe contains

More information

XEN1250 Digital Magnetic Switch

XEN1250 Digital Magnetic Switch Features Digital magnetic movement sensor. 3 wire operation Very low magnetic thresholds Programmable speed and threshold High magnetic operation range No permanent effects with magnetic field overloading

More information

TSH253 High Sensitivity Omni-Polar Hall Effect Switch

TSH253 High Sensitivity Omni-Polar Hall Effect Switch Pin Definition: 1. V CC 2. GND 3. Output SOT-23 Pin Definition: 1. V CC 2. Output 3. GND Description TSH253 Hall-effect sensor is a temperature stable, stress-resistant switch. Superior high-temperature

More information

Low-Power Hall Switch

Low-Power Hall Switch Low-Power Hall Switch FEATURES Micro power consumption 2.4V to 5.5V battery operation Chopper Amplifier based design: Insensitive to noise and offset caused by process variations, operating temperatures

More information

Dynamic Differential Hall Effect Sensor IC TLE 4923

Dynamic Differential Hall Effect Sensor IC TLE 4923 Dynamic Differential Hall Effect Sensor IC TLE 493 Bipolar IC Features Advanced performance Higher sensitivity Symmetrical thresholds High piezo resistivity Reduced power consumption South and north pole

More information

Type Ordering Code Package TLE U Q67006-A9055 P-SSO-4-1 New type

Type Ordering Code Package TLE U Q67006-A9055 P-SSO-4-1 New type 查询 TLE4921-2 供应商 Dynamic Differential Hall Effect Sensor IC TLE 4921-2 Preliminary Data Bipolar IC Features AC coupled Digital output signal Two-wire and three-wire configuration possible Large temperature

More information

3185 THRU 3189 HALL-EFFECT LATCHES FOR HIGH-TEMPERATURE OPERATION FEATURES. ABSOLUTE MAXIMUM RATINGS at T A = +25 C V CC GROUND OUTPUT SUPPLY

3185 THRU 3189 HALL-EFFECT LATCHES FOR HIGH-TEMPERATURE OPERATION FEATURES. ABSOLUTE MAXIMUM RATINGS at T A = +25 C V CC GROUND OUTPUT SUPPLY 3185 THRU 3189 Data Sheet 2769.2A X V CC These Hall-effect latches are extremely temperature-stable and stressresistant sensors especially suited for operation over extended temperature ranges to +15 C.

More information

AH3373. Description. Pin Assignments NEW PRODUCT. Applications. Features HIGH VOLTAGE HIGH SENSITIVITY HALL EFFECT UNIPOLAR SWITCH AH3373

AH3373. Description. Pin Assignments NEW PRODUCT. Applications. Features HIGH VOLTAGE HIGH SENSITIVITY HALL EFFECT UNIPOLAR SWITCH AH3373 HIGH VOLTAGE HIGH SENSITIVITY HALL EFFECT UNIPOLAR SWITCH Description The is a high voltage high sensitivity Hall Effect Unipolar switch IC designed for proximity, position and level sensing in industrial

More information

MT6325 Series Omni-polar, Low Power, MR Switch Sensor

MT6325 Series Omni-polar, Low Power, MR Switch Sensor Feature MR+CMOS monolithic structure High sensitivity B OP = 17Gauss, B RP = 14Gauss Low power consumption Average supply current

More information

AH3574. Description. Pin Assignments NEW PRODUCT. Features. Applications HIGH VOLTAGE HIGH SENSITIVITY HALL EFFECT OMNIPOLAR SWITCH 3 OUTPUT GND 2

AH3574. Description. Pin Assignments NEW PRODUCT. Features. Applications HIGH VOLTAGE HIGH SENSITIVITY HALL EFFECT OMNIPOLAR SWITCH 3 OUTPUT GND 2 HIGH VOLTAGE HIGH SENSITIVITY HALL EFFECT OMNIPOLAR SWITCH Description The is a high voltage high sensitivity Hall Effect Omnipolar switch IC designed for proximity, position and level sensing in consumer

More information

AUTOMOTIVE CURRENT TRANSDUCER HC6F600-S

AUTOMOTIVE CURRENT TRANSDUCER HC6F600-S AUTOMOTIVE CURRENT TRANSDUCER HC6F600-S 18198102215 Page 1/5 Introduction Principle of HC6F Family The HC6F Family is for use on the electronic measurement of DC, AC or pulsed currents in high power and

More information

AUTOMOTIVE CURRENT TRANSDUCER HC6F700-S

AUTOMOTIVE CURRENT TRANSDUCER HC6F700-S AUTOMOTIVE CURRENT TRANSDUCER HC6F700-S 18198102215 Page 1/5 Introduction Principle of HC6F Family The HC6F Family is for use on the electronic measurement of DC, AC or pulsed currents in high power and

More information

Linear Current Sensor with differential outputs

Linear Current Sensor with differential outputs Linear Current Sensor with differential outputs Features: 4Xmm current conductor through hole Output voltage proportional to AC and DC current Built-in AC to DC rectifier circuit Wide sensing current range

More information

PT3636 Hi-sensitivity Unipolar Hall Switch

PT3636 Hi-sensitivity Unipolar Hall Switch PT3636 Hi-sensitivity Unipolar Hall Switch Applications Automotive Brake Pedal Position detection Proximity detection Weak magnets application Solid state switches P/N: PT3636-XX-X TO92-3L (UA) Features

More information

CURRENT SENSORS REFERENCE DESIGNS Application Note

CURRENT SENSORS REFERENCE DESIGNS Application Note CURRENT SENSORS REFERENCE DESIGNS Application Note This document describes several reference designs for current sensing applications with either conventional or planar Hall sensors (Triaxis). The designs

More information

AUTOMOTIVE CURRENT TRANSDUCER HC2F100-SN CLIPS

AUTOMOTIVE CURRENT TRANSDUCER HC2F100-SN CLIPS AUTOMOTIVE CURRENT TRANSDUCER HCF-SN CLIPS Introduction The HCF CLIPS Family is for the electronic measurement of DC, AC or pulsed currents in high power and low voltage automotive applications with galvanic

More information

MT6803 Magnetic Angle Sensor IC

MT6803 Magnetic Angle Sensor IC Features and Benefits Based on advanced magnetic field sensing technology Measures magnetic field direction rather than field intensity Contactless angle measurement Large air gap Excellent accuracy, even

More information

Features and Benefits

Features and Benefits HAL24 Hall-effect sensor is a temperature stable, stress-resistant, Low Tolerance of Sensitivity micro-power switch. Superior high-temperature performance is made possible through a dynamic offset cancellation

More information

MT6303 Series Omni-polar, Low Power, MR Switch Sensor

MT6303 Series Omni-polar, Low Power, MR Switch Sensor Feature AMR+CMOS monolithic structure High sensitivity B OP = 18Gauss, B RP = 13Gauss Low power consumption Average supply current

More information

3280, 3281, AND 3283 CHOPPER-STABILIZED, PRECISION HALL-EFFECT LATCHES. Suffix ' LT' & ' UA' Pinning (SOT89/TO-243AA & ultra-mini SIP)

3280, 3281, AND 3283 CHOPPER-STABILIZED, PRECISION HALL-EFFECT LATCHES. Suffix ' LT' & ' UA' Pinning (SOT89/TO-243AA & ultra-mini SIP) 28, 281, AND 28 Data Sheet 2769.2b Suffix ' LT' & ' UA' Pinning (SOT89/TO-24AA & ultra-mini SIP) X V CC 1 SUPPLY 2 GROUND PTCT Dwg. PH--2 Pinning is shown viewed from branded side. OUTPUT The A28--, A281--,

More information

SS1636 Unipolar Hall Switch-High sensitivity

SS1636 Unipolar Hall Switch-High sensitivity Packages 3 pin TSOT23 (suffix ST) 3 pin SIP (suffix UA) Features and Benefits 2.5V to 5.5V Operation -40 C to 150 C Superior temperature operation range CMOS technology Low current consumption Chopper-stabilized

More information

HALL-EFFECT, DIRECTION-DETECTION SENSORS

HALL-EFFECT, DIRECTION-DETECTION SENSORS Data Sheet 2765.1A* 3422 S V CC X SUPPLY LOGIC DIRECTION E1 GROUND E2 X E1 OUTPUT SPEED Dwg. PH-15 Pinning is shown viewed from branded side. ABSOLUTE IMUM RATINGS Supply Voltage, V CC............. 18

More information

Introduction to Kionix KXM Tri-Axial Accelerometer

Introduction to Kionix KXM Tri-Axial Accelerometer Author: Che-Chang Yang(2006-01-02); recommendation: Yeh-Liang Hsu (2006-01-03). Introduction to Kionix KXM52-1050 Tri-Axial Accelerometer The Kionix KXM52-1050 tri-axial accelerometer, as shown in Figure

More information

A1225, A1227, and A1229. Hall Effect Latch for High Temperature Operation

A1225, A1227, and A1229. Hall Effect Latch for High Temperature Operation A, A27, and A29 Features and Benefits Symmetrical switchpoints Superior temperature stability Operation from unregulated supply Open-drain ma output Reverse Battery protection Activate with small, commercially

More information

SS1350 Unipolar Hall Switch-Low Sensitivity

SS1350 Unipolar Hall Switch-Low Sensitivity Packages 3 pin SOT23 (suffix SO) 3 pin SIP (suffix UA) Features and Benefits 3.5V to 24V Operation -40 C to 150 C Superior temperature operation CMOS technology Low current consumption Chopper-stabilized

More information

Hardware Documentation. Data Sheet HAL 700, HAL 740. Dual Hall-Effect Sensors with Independent Outputs. Edition Nov. 30, 2009 DSH000029_002EN

Hardware Documentation. Data Sheet HAL 700, HAL 740. Dual Hall-Effect Sensors with Independent Outputs. Edition Nov. 30, 2009 DSH000029_002EN Hardware Documentation Data Sheet HAL 7, HAL 74 Dual Hall-Effect Sensors with Independent Outputs Edition Nov. 3, 29 DSH29_2EN HAL7, HAL74 DATA SHEET Copyright, Warranty, and Limitation of Liability The

More information

AUTOMOTIVE CURRENT TRANSDUCER HAH1DR 300-S

AUTOMOTIVE CURRENT TRANSDUCER HAH1DR 300-S AUTOMOTIVE CURRENT TRANSDUCER Introduction The HAH1DR family is for the electronic measurement of DC, AC or pulsed currents in high power automotive applications with galvanic isolation between the primary

More information

AUTOMOTIVE CURRENT TRANSDUCER OPEN LOOP TECHNOLOGY HAH1DR 200-S

AUTOMOTIVE CURRENT TRANSDUCER OPEN LOOP TECHNOLOGY HAH1DR 200-S AUTOMOTIE CURRENT TRANSDUCER OPEN LOOP TECHNOLOGY HAHDR 2-S Introduction The HAHDR family is for the electronic measurement of DC, AC or pulsed currents in high power automotive applications with galvanic

More information

Cosemitech. Automotive Product Group CH913/CH913L. FEATURES and FUNCTIONAL DIAGRAM APPLICATIONS DESCRIPTION

Cosemitech. Automotive Product Group CH913/CH913L. FEATURES and FUNCTIONAL DIAGRAM APPLICATIONS DESCRIPTION FEATURES and FUNCTIONAL DIAGRAM Micro-power Omnipolar-Switch Hall Sensor Multiple Sensitivity Options (BOP / BRP): ±33 / ±23 Gauss; Open Drain output ability Chopper stabilized design provides: - Superior

More information

AUTOMOTIVE CURRENT TRANSDUCER HAH3DR 700-S00

AUTOMOTIVE CURRENT TRANSDUCER HAH3DR 700-S00 AUTOMOTIVE CURRENT TRANSDUCER HAH3DR 700-S00 Introduction The HAH3DR family, a tri-phase tranducer is for the electronic measurement of DC, AC or pulsed s in high power automotive applications with galvanic

More information

Hardware Documentation. Data Sheet. HAL 5xy. Hall-Effect Sensor Family. Edition April 15, 2010 DSH000020_004E

Hardware Documentation. Data Sheet. HAL 5xy. Hall-Effect Sensor Family. Edition April 15, 2010 DSH000020_004E Hardware Documentation Data Sheet HAL 5xy Hall-Effect Sensor Family Edition April 15, 21 DSH2_4E HAL 5xy DATA SHEET Copyright, Warranty, and Limitation of Liability The information and data contained in

More information

TSH188 Ultra High Sensitivity Hall Effect Latch

TSH188 Ultra High Sensitivity Hall Effect Latch Pin Definition: 1. V CC 2. GND 3. Output SOT-23 Pin Definition: 1. V CC 2. Output 3. GND Description TSH188 Hall-effect sensor is a temperature stable, stress-resistant sensor. Superior high-temperature

More information

Data Sheet, V 1.1, Oct TLE4906H TLE4906L. High Precision Hall-Effect Switch. Sensors

Data Sheet, V 1.1, Oct TLE4906H TLE4906L. High Precision Hall-Effect Switch. Sensors Data Sheet, V 1.1, Oct. 2005 TLE4906H High Precision Hall-Effect Switch Sensors Edition 2005-10 Published by Infineon Technologies AG, St.-Martin-Strasse 53, 81669 München, Germany Infineon Technologies

More information

TLV4946-2L. Datasheet. Sense and Control. Value Optimized Hall Effect Latch for Industrial and Consumer Applications. Rev1.

TLV4946-2L. Datasheet. Sense and Control. Value Optimized Hall Effect Latch for Industrial and Consumer Applications. Rev1. Value Optimized Hall Effect Latch for Industrial and Consumer Applications Datasheet Rev1.1, 2010-08-02 Sense and Control Edition 2010-08-02 Published by Infineon Technologies AG 81726 Munich, Germany

More information

Dual Channel Sensitive Hall Effect Switch CYD8536. With Quadrature Outputs

Dual Channel Sensitive Hall Effect Switch CYD8536. With Quadrature Outputs Dual Channel Sensitive Hall Effect Switch CYD8536 With Quadrature Outputs The CYD8536 a dual-channel, bipolar switch with two Hall Effect sensing elements, each providing a separate digital output for

More information

AH3368Q. Description. Pin Assignments NEW PRODUCT. Features. Applications HIGH VOLTGAE LOW SENSITIVITY AUTOMOTIVE HALL EFFECT UNIPOLAR SWITCH AH3368Q

AH3368Q. Description. Pin Assignments NEW PRODUCT. Features. Applications HIGH VOLTGAE LOW SENSITIVITY AUTOMOTIVE HALL EFFECT UNIPOLAR SWITCH AH3368Q Description The is an AECQ100 qualified high voltage low sensitivity Hall Effect Unipolar switch IC designed for position and proximity sensing in automotive applications such as in seat and seatbelt buckle,

More information

TLV4946K, TLV4946-2K. Datasheet. Sense and Control. Value Optimized Hall Effect Latches for Industrial and Consumer Applications. Rev1.

TLV4946K, TLV4946-2K. Datasheet. Sense and Control. Value Optimized Hall Effect Latches for Industrial and Consumer Applications. Rev1. Value Optimized Hall Effect Latches for Industrial and Consumer Applications Datasheet Rev1.1, 2010-08-02 Sense and Control Edition 2010-08-02 Published by Infineon Technologies AG 81726 Munich, Germany

More information

MT1101 Series CMOS, Uni-polar, Hall-Effect

MT1101 Series CMOS, Uni-polar, Hall-Effect MT1101 eries CMO, Unipolar, HallEffect Magnetic Position ensors Features and Benefits CMO Technology Magnetic Type: Unipolar Wide Operating oltage Range: upply oltage 2.8~18 pecified Operating Temperature

More information

SUPPLY GROUND NO (INTERNAL) CONNECTION Data Sheet a SUNSTAR 传感与控制 61 AND 62 Suffix Code 'LH' Pinning (SOT2W) X NC 1

SUPPLY GROUND NO (INTERNAL) CONNECTION Data Sheet a SUNSTAR 传感与控制   61 AND 62 Suffix Code 'LH' Pinning (SOT2W) X NC 1 A61 and A62 2-Wire Chopper Stabilized Hall Effect Switches Discontinued Product These parts are no longer in production The device should not be purchased for new design applications. Samples are no longer

More information

HALL-EFFECT SWITCH FOR 2-WIRE APPLICATIONS

HALL-EFFECT SWITCH FOR 2-WIRE APPLICATIONS Data Sheet 27621.3A 3161 X This Hall-effect switch is a monolithic integrated circuit designed to operate continuously over extended temperatures to +85 C. The unipolar switching characteristic makes this

More information

AUTOMOTIVE CURRENT TRANSDUCER HAH3DR 700-S02

AUTOMOTIVE CURRENT TRANSDUCER HAH3DR 700-S02 AUTOMOTIVE CURRENT TRANSDUCER Introduction The HAH3DR family, a tri-phase tranducer is for the electronic measurement of DC, AC or pulsed s in high power automotive applications with galvanic isolation

More information

January 2009 TLE4906K / TLE4906L. High Precision Hall Effect Switch. Data Sheet V 2.0. Sensors

January 2009 TLE4906K / TLE4906L. High Precision Hall Effect Switch. Data Sheet V 2.0. Sensors January 2009 TLE4906K / High Precision Hall Effect Switch Data Sheet V 2.0 Sensors Edition 2009-01 Published by Infineon Technologies AG 81726 Munich, Germany 2009 Infineon Technologies AG All Rights Reserved.

More information

HAL HAL 576, 579 HAL HAL 584

HAL HAL 576, 579 HAL HAL 584 Hardware Documentation Data Sheet HAL 573...HAL 576, 579 HAL 581...HAL 584 Two-Wire Hall-Effect Sensor Family Edition Dec. 22, 28 DSH145_3EN HAL57x, HAL58x DATA SHEET Copyright, Warranty, and Limitation

More information

MXD2125J/K. Ultra Low Cost, ±2.0 g Dual Axis Accelerometer with Digital Outputs

MXD2125J/K. Ultra Low Cost, ±2.0 g Dual Axis Accelerometer with Digital Outputs Ultra Low Cost, ±2.0 g Dual Axis Accelerometer with Digital Outputs MXD2125J/K FEATURES RoHS Compliant Dual axis accelerometer Monolithic CMOS construction On-chip mixed mode signal processing Resolution

More information

MOS (PTY) LTD. E Single Channel PIR Signal Processor. Applications. General Description. Features. Digital Sensor Assembly with E931.

MOS (PTY) LTD. E Single Channel PIR Signal Processor. Applications. General Description. Features. Digital Sensor Assembly with E931. General Description The integrated circuit is designed for interfacing Passive Infra Red (PIR) sensors with micro-controllers or processors. A single wire Data Out, Clock In (DOCI) interface is provided

More information

SINGLE PHASE HALL EFFECT LATCH General Description. Features. Applications

SINGLE PHASE HALL EFFECT LATCH General Description. Features. Applications General Description The is an integrated Hall sensor with H- bridged output driver designed for brushless DC motor applications. The device includes an on-chip Hall sensor for magnetic sensing, an amplifier

More information

Distributed by: www.jameco.com 1-800-831-4242 The content and copyrights of the attached material are the property of its owner. Features - 3.5V to 20V DC operation voltage - Temperature compensation -

More information

Hardware Documentation. Data Sheet HAL 300. Differential Hall Effect Sensor IC. Edition Nov. 24, 2008 DSH000016_002EN

Hardware Documentation. Data Sheet HAL 300. Differential Hall Effect Sensor IC. Edition Nov. 24, 2008 DSH000016_002EN Hardware Documentation Data Sheet HAL 300 Differential Hall Effect Sensor IC Edition Nov. 24, 2008 DSH000016_002EN HAL300 DATA SHEET Copyright, Warranty, and Limitation of Liability The information and

More information

AH3363Q. Description. Pin Assignments NEW PRODUCT. Features. Applications HIGH VOLTAGE HIGH SENSITIVITY AUTOMOTIVE HALL EFFECT UNIPOLAR SWITCH AH3363Q

AH3363Q. Description. Pin Assignments NEW PRODUCT. Features. Applications HIGH VOLTAGE HIGH SENSITIVITY AUTOMOTIVE HALL EFFECT UNIPOLAR SWITCH AH3363Q Description The is an AEC100 qualified high voltage high sensitivity Hall Effect Unipolar switch IC designed for position and proximity sensing in automotive applications such as in seat and seatbelt buckle,

More information

Smart motor driver with embedded Hall sensor

Smart motor driver with embedded Hall sensor Smart motor driver with embedded Hall sensor Features Motor driver with integrated Hall sensor Lock-shutdown protection & auto-restart function Precise magnetic switching thresholds Soft-switch phase-switching

More information

AUTOMOTIVE CURRENT TRANSDUCER OPEN LOOP TECHNOLOGY HAH3DR 1100-S07

AUTOMOTIVE CURRENT TRANSDUCER OPEN LOOP TECHNOLOGY HAH3DR 1100-S07 AUTOMOTIVE CURRENT TRANSDUCER OPEN LOOP TECHNOLOGY Introduction The HAH3DR-S07 family is a tri-phase transducer for DC, AC, or pulsed currents measurement in automotive applications. It offers a galvanic

More information

Silicon Hall ICs. 6.6 Application Notes: Differential Hall IC TLE U

Silicon Hall ICs. 6.6 Application Notes: Differential Hall IC TLE U 6.6 Application Notes: Differential Hall IC TLE 4921-3U Applications Detection of rotational speed of ferromagnetic gear wheels Detection of rotational position Detection of rotational speed of magnetic

More information

Si-Hall ICs. 1 Application Notes for Differential Hall IC s

Si-Hall ICs. 1 Application Notes for Differential Hall IC s 1 Application Notes for Differential Hall IC s Applications Detection of rotational speed of ferromagnetic gear wheels Detection of rotational position Detection of rotational speed of magnetic encoder

More information

Hardware Documentation. Data Sheet HAL 549. Hall-Effect Sensor with Undervoltage Reset. Edition Jan. 30, 2009 DSH000022_003EN

Hardware Documentation. Data Sheet HAL 549. Hall-Effect Sensor with Undervoltage Reset. Edition Jan. 30, 2009 DSH000022_003EN Hardware Documentation Data Sheet HAL 549 Hall-Effect Sensor with Undervoltage Reset Edition Jan. 3, 29 DSH22_3EN DATA SHEET Copyright, Warranty, and Limitation of Liability The information and data contained

More information

VTMS. Valve Train Measurement Solution. Data sheet

VTMS. Valve Train Measurement Solution. Data sheet The measurement solution includes a GMR, an amplifier and a processing unit, which can be controlled by a PC (via USB interface). The head GLM711AVx is intended for the use with passive scales with a pitch

More information

Discontinued Product

Discontinued Product 346, 356, and 358 Hall Effect Gear-Tooth Sensor ICs Zero Speed Discontinued Product This device is no longer in production. The device should not be purchased for new design applications. Samples are no

More information

Improved Low Cost ±5 g Dual-Axis Accelerometer with Ratiometric Analog Outputs MXR7305VF

Improved Low Cost ±5 g Dual-Axis Accelerometer with Ratiometric Analog Outputs MXR7305VF Improved Low Cost ±5 g Dual-Axis Accelerometer with Ratiometric Analog Outputs MXR7305VF FEATURES Dual axis accelerometer fabricated on a single CMOS IC Monolithic design with mixed mode signal processing

More information

TLE4976-1K / TLE4976L

TLE4976-1K / TLE4976L February 2009 / High Precision Hall Effect Switch with Current Interface Data Sheet Rev. 2.0 Sense & Control Edition 2009-02-12 Published by Infineon Technologies AG 81726 Munich, Germany 2009 Infineon

More information

AUTOMOTIVE CURRENT TRANSDUCER DHAB S/15

AUTOMOTIVE CURRENT TRANSDUCER DHAB S/15 AUTOMOTIVE CURRENT TRANSDUCER Introduction The DHAB family is best suited for DC, AC, or pulsed currents measurement in high power and low voltage automotive applications. Its contains galvanic isolation

More information

EPAD OPERATIONAL AMPLIFIER

EPAD OPERATIONAL AMPLIFIER ADVANCED LINEAR DEVICES, INC. ALD1722E/ALD1722 EPAD OPERATIONAL AMPLIFIER KEY FEATURES EPAD ( Electrically Programmable Analog Device) User programmable V OS trimmer Computer-assisted trimming Rail-to-rail

More information

MT1321 Series CMOS, Omni-polar, Low Power Hall Sensor

MT1321 Series CMOS, Omni-polar, Low Power Hall Sensor MT1321 eries CMO, Omni-polar, Low Power Hall ensor Features and Benefits CMO Technology Magnetic - Type: Omni - polar Operating Voltage Range: upply Voltage 2.2~5V pecified Operating Temperature Range:

More information

BIPOLAR HALL-EFFECT POSITION SENSORS

BIPOLAR HALL-EFFECT POSITION SENSORS General Description The is an integrated Hall-effect latched sensor designed for electronic commutation of brushless DC motor applications. The device includes an on-chip Hall voltage generator for magnetic

More information

AUTOMOTIVE CURRENT TRANSDUCER OPEN LOOP TECHNOLOGY HAH1DRW 300-S

AUTOMOTIVE CURRENT TRANSDUCER OPEN LOOP TECHNOLOGY HAH1DRW 300-S AUTOMOTIVE CURRENT TRANSDUCER OPEN LOOP TECHNOLOGY Introduction The HAH1DRW family is for the electronic measurement of DC, AC or pulsed currents in high power and low voltage automotive applications with

More information

The package type is in a lead (Pb)-free version was verified by third party organization.

The package type is in a lead (Pb)-free version was verified by third party organization. MH 281 is a unipolar Hall effect sensor IC. It incorporates advanced chopper stabilization technology to provide accurate and stable magnetic switch points. The design, specifications and performance have

More information

Current Sensor: ACS750xCA-100

Current Sensor: ACS750xCA-100 5 Pin 1: V CC Pin 2: Gnd Pin 3: Output 4 1 2 3 Terminal 4: I p+ Terminal 5: I p- ABSOLUTE MAXIMUM RATINGS Operating Temperature S... 2 to +85ºC E... 4 to +85ºC Supply Voltage, Vcc...16 V Output Voltage...16

More information

PART OBSOLETE USE AH3774. Applications

PART OBSOLETE USE AH3774. Applications PART OBSOLETE USE AH3774 HIGH SENSITIVITY HALL EFFECT LATCH Description Pin Assignments The is an integrated Hall effect latched sensor designed for electronic commutation of brush-less DC motor applications.

More information

Differential Two-Wire Hall Effect Sensor IC TLE 4942 TLE 4942 C

Differential Two-Wire Hall Effect Sensor IC TLE 4942 TLE 4942 C Differential Two-Wire Hall Effect Sensor IC TLE 4942 TLE 4942 C Features Two-wire PWM current interface Detection of rotation direction Airgap diagnosis Assembly position diagnosis Dynamic self-calibration

More information

AUTOMOTIVE CURRENT TRANSDUCER OPEN LOOP TECHNOLOGY HAH3DR 800-S03/SP2

AUTOMOTIVE CURRENT TRANSDUCER OPEN LOOP TECHNOLOGY HAH3DR 800-S03/SP2 AUTOMOTIVE CURRENT TRANSDUCER OPEN LOOP TECHNOLOGY Introduction The HAH3DR-S03 family is a tri-phase transducer for DC, AC, or pulsed currents measurement in high power and low voltage automotive applications.

More information

Hardware Documentation. Data Sheet. HAL 54x. Hall-Effect Sensor Family. Edition Feb. 12, 2009 DSH000023_003EN

Hardware Documentation. Data Sheet. HAL 54x. Hall-Effect Sensor Family. Edition Feb. 12, 2009 DSH000023_003EN Hardware Documentation Data Sheet HAL 54x Hall-Effect Sensor Family Edition Feb. 12, 29 DSH23_3EN HAL54x DATA SHEET Copyright, Warranty, and Limitation of Liability The information and data contained in

More information