High Performance SAW Oscillators
|
|
|
- Gillian Davidson
- 6 years ago
- Views:
Transcription
1 High Performance SAW Oscillators
2 API Technologies, a leading supplier of standard and custom SAW Oscillators, combines low phase noise, excellent frequency stability and rugged construction in a line-up of cost effective solutions. Low Phase Noise Performance Our SAW Oscillators utilize a low jitter planar SAW which translates to extremely low phase noise performance and exceptionally low accumulated jitter. These high performance SAW Oscillators, in frequencies from 0 MHz to 20 GHz, contain features found in higher priced designs including: Exceptionally Low Phase Noise to dbc/hz at 1 khz offset Superior Phase Jitter less than 1 psec rms High Stability of less than ppm/year Low Jitter Sources Our family of Low Jitter Clock Sources provide less than 3 psec (RMS) jitter and are available in multiple formats and configurations including: ECL PECL 3.3 V LVPECL
3
4 0% Testing All API Technologies SAW Oscillators undergo rigorous electrical testing at pre-seal and post-seal for critical parameters, both at room and over temperature, including: Phase Noise Center Frequency Pull Range Tuning Linearity Spurious Harmonics Output Power
5
6 Part Number Voltage Controlled SAW Oscillators Center Frequency (MHz) Tuning BW (ppm) Phase Noise (dbc/hz) Temperature Range ( C) Package MN MN MN MN MN MN MN MN MN MN MN MN MN MN MN MN MN MN MN MN MN MN MN MN MN MN MN MN MN MN MN MN MN MN MN MN MN MN MN MN MN MN MN MN MN MN MN7244. MN MN MN MN MN MN MN MN MN MN MN MN MN MN MN MN MN to to to to +0
7 Voltage Controlled SAW Oscillators Part Number Center Frequency (MHz) Tuning BW (ppm) Phase Noise (dbc/hz) Temperature Range ( C) Package MN MN MN MN MN MN MN MN MN MN MN MN MN MN MN MN MN MN MN MN MN MN MN MN MN MN MN MN MN MN MN MN MN MN MN MN MN MN MN MN MN MN MN MN MN MN MN MN MN to to to to to to +0 Voltage Controlled SAW Oscillators API Voltage Controlled SAW Oscillators are design for both performance and reliability. With your choice of either hermetic kovar or low cost package options, these low phase noise oscillators feature low vibration sensitivity of = 2x-9/g while delivering linear tuning over a wide temperature range. Performance is typical measured at 25 C. Phase Noise is measured at 1 khz offset. For more information or to let us know how we may help you, please contact us at
8 Multiple Features High performance is the cornerstone of our SAW Oscillator designs. We use a low loss planar SAW device as the frequency controlling element. Adding multiple complimentary features including gold for low loss and kovar SAW packages results in a product with inherent high reliability to meet today s demanding requirements.
9 Fixed Frequency SAW Oscillators Part Number Center Frequency (MHz) Phase Noise (dbc/hz) Stability (ppm/year) DC Supply (V) Package MN MN MN MN MN MN MN MN MN MN MN MN MN MN MN MN MN MN MN MN MN MN MN MN MN MN MN MN Phased Locked Voltage Controlled SAW Oscillators Designed for high-end commercial and military applications, these low phase noise Phased Locked designs combine the high fundamental frequency and low phase noise of a SAW with the frequency stability of an external reference. The result is a family of designs that have excellent vibration sensitivity, low phase noise performance which are available in standard and custom frequencies. Performance is typical measured at 25 C. Phase Noise is measured at 1 khz offset. Phase Locked Voltage Controlled SAW Oscillators Model Number Center Frequency (MHz) Lock Range (ppm) Reference Frequency (MHz) SSB Phase Noise (dbc/hz) Supply (Volts/mA) MN745-0 MN MN MN MN MN MN MN MN MN MN /- 0 +/- 0 +/- 0 +/- 0 +/- 0 +/- 0 +/- 0 +/- 0 +/- 0 +/- 0 +/- 0 Hz Hz khz khz khz MHz /90 /90 /90 /1 /120 /120 /120 /120 /120 /120 /120
10 High Performance Exceptional performance coupled with high reliability is what differentiates API SAW Oscillators from other vendors. Our engineers continue to push the technology envelope in order to provide our customers with standard and custom designs that meet specifications and exceed expectations. Excellent close-in phase noise performance -165 dbc/hz Raising The Bar Exceptional phase noise performance is the cornerstone of most SAW based oscillator requirements. Using a number of proprietary methods including low noise bipolar amplifiers, low noise voltage regulators and low loss SAW designs, we have raised the industry's bar for SAW oscillator performance. Linear Tuning Ranges By using a SAW with a conventional phase shifter, API oscillators achieve a high tuning linearity..15 MHz MN Frequency vs. Vt. MHz.05 MHz MHz.00 MHz MHz MHz MHz 0 Volts 0.5 Volts 1 Volts 1.5 Volts 2 Volts 2.5 Volts 3 Volts 3.5 Volts 4 Volts 4.5 Volts 5 Volts Volts
11 Integral clean up filters like this 7 pole LC design Varactor diodes in quadrature allow for linear tuning beyond traditional SAW oscillator designs Available X2 or X4 multipliers extend frequency performance to 0 MHz A pair of parallel voltage regulators are designed in for multiple bias flexibility Embedded microcontrollers load critical parameters during powerup and then enter a low-noise state to eliminate spurious products Many of our SAW phase-lock oscillators provide fail-safe measures like the lock detect circuitry which alarms when loss of lock occurs We use Ultra Low Noise bipolar transistors for improved output power without sacrificing performance
12 High Reliability API s SAW oscillators are manufactured for integration into both commercial and military applications. Our oscillators are available with screening to test methods of MIL-STD-3, MIL-STD-202 and MIL- STD- in strict compliance with our ISO9001:2001 certified facility. Seam Sealing API Technologies' inventory of sealing methods includes seam sealing which maintains environmental integrity to pass the rigors of MIL-PRF-3534 methods 14 conditions A & C for both Gross and Fine leak detection. Constant Acceleration API offers constant acceleration in compliance with MIL-STD-3, Test Method 2001 for our SAW oscillator products. Vibration Testing On-site random and sinusoidal vibration to 30g, along with shock testing allow our engineers to test their designs under extreme conditions.
13 0% Testing Our SAW oscillators undergo rigorous testing for phase noise, harmonic and sub-harmonic suppression, output signal power level and tuning linearity following any environmental screening. The units are tested at the operating temperatures which assures compliance to specifications under all environmental conditions. Temperature Cycling We cycle our SAW oscillators from -55 to +0 C in compliance with MIL-STD-3, Test Method Cond. A Stability Bake All our oscillators receive a 96 hour stability bake at 0 C to provide optimal stability. We also can provide an active burn-in for the oscillators.
14 0.95 x Pin Package x 0.5 Pin Package 1.27 x 0.77 Pin Package 1.00 x Pin Flatpack Package 1.50 x 1.00 Package x 1.0 Pin Package
15 Quality Assurance Certified to ISO 9001:2001 and AS90-B Quality control system compliant to MIL-I-4520 and MIL-Q ANSI/Z compliant calibration Screening available to the test methods of MIL-STD-3, MIL-STD-202 and MIL-STD-
16 Design Resources micro.apitech.com API Technologies website features complete information on all standard products with updated versions of more than 900 product datasheets. API s customers enjoy FREE engineering tools, tours, application notes, white papers, and the ability to create a custom designed product per individual specifications. Cascade Design Suite With over 750 datasheets on API Technologies Amplifiers, Mixers, Oscillators & Control Products, this CD also offers the industry s best manufacturer s cross reference. The System Simulator lets you optimize your design by viewing an individual component s contribution to overall system performance. You can also quickly evaluate trade-offs in component selection and their impact on system performance (e.g. Gain, Noise, P1dB, IP3, Dynamic Range,...) API Technologies Corp. is a trusted provider of RF/microwave, microelectronics, and security solutions for critical and high-reliability applications. The company designs, develops and manufactures electronic components, modules, systems and products for technically demanding defense, commercial/industrial and aerospace applications. API Technologies customers include many leading Fortune 500 companies, as well as a majority of NATO governments. While API was founded in 191, our heritage brands have served the demanding, hi-rel marketplace for more than 60 years. API Technologies trades on the NASDAQ under the symbol ATNY
RF & Microwave Power Amplifiers
RF & Microwave Power Amplifiers Spectrum Microwave, a world class leader in amplifier technology, is your full service partner for high performance power amplification requirements. Designed To Perform
Low Noise Oscillator series LNO 4800 B MHz
Specific request can be addressed to RAKON hirel@rakon.com Product Description LNO 4800 B3 is a low noise oscillator generating an output signal at 4800 MHz. It is composed by an OCSO (Oven Controlled
VS-500A Voltage Controlled Saw Oscillator
Product Data Sheet VS-500A Voltage Controlled Saw Oscillator Features Output Frequencies from 155 MHz to 800 MHz Low Jitter < 1 ps rms in the 12kHz to 20MHz range < 1ps rms jitter in 50kHz to 80MHz range
VFH2321-VFH2324 VFH2421-VFH2424 XO Hi-REL, 1.8V 5x7mm SMD, HCMOS
Features Leadless chip carrier package is hermetically sealed for superior aging and field performance Crystal angle controlled to ±0.5 minute for excellent temperature stability 168 hour Class B burn-in
FMAM1035 DATA SHEET. 6 db NF Low Phase Noise Amplifier Operating From 3 GHz to 8 GHz with 11 db Gain, 14 dbm P1dB and SMA. Features: Applications:
FMAM13 6 db NF Low Phase Noise Amplifier Operating From 3 GHz to 8 GHz with 11 db Gain, 14 dbm P1dB and SMA The FMAM13 is a low phase noise amplifier that operates across the frequency range from 3 GHz
Features. = +25 C, Vdc = +12V
Typical Applications The VCO Module is ideal for: Industrial/Medical Equipment Test & Measurement Equipment Military Radar, EW & ECM Lab Instrumentation Functional Diagram Electrical Specifications, T
Lead Finish: T = Standard S = Solder Dip (**) Package Type: 0 = DIP-14 1 = SMD 2 = Gull Wing Supply Voltage: 3 = +3.3V 5 = +5.0V
Description The Q-Tech Analog TCXO encompasses state-of-the-art oscillators with low phase noise, jitter, and tight temperature stability. The TCXO is available in a DIP (QT3003), SMD (QT3013) or Gull
Package Type: 0 Through Hole Supply Voltage: V V V Logic: HCMOS Sine Wave
Description Q-Tech s High Stability OCXO is a high reliability signal generator that provides an HCMOS or Sine Wave output. The OCXO is available in a Through hole package. A flexible design allows Q-Tech
VCO-600A Voltage Controlled Saw Oscillator
Product Data Sheet Not Recommended For New Designs Voltage Controlled Saw Oscillator Features The VCO600A Voltage Controlled SAW Oscillator Output Frequency @ 155 MHz to 1 GHz Low jitter, 3pS rms for 622.080
DELAY LINES PRODUCT & CAPABILITIES OVERVIEW
DELAY LINES PRODUCT & CAPABILITIES OVERVIEW COMPANY OVERVIEW Premier provider of technically demanding RF/microwave, electromagnetic, power, and security solutions for defense, aerospace, commercial and
VFH230C Series XO Low Jitter 3.3V 5x7mm SMD, LVPECL / LVDS
5x7mm SMD, LV / Features 750kHz to 800MHz frequency range
Specification AXIOM210 Rev.: 3 Date: Oscillator type: Ultra-Low Phase Noise OCXO in Vibration-isolated Package
in Specification AXIOM210 Rev.: 3 Date: 2015-02-17 Oscillator type: Ultra-Low Phase Noise OCXO in Vibration-isolated Package Parameter min. typ. max. Unit Condition Frequency range 50 130 MHz Standard
CUSTOM INTEGRATED ASSEMBLIES
17 CUSTOM INTEGRATED ASSEMBLIES CUSTOM INTEGRATED ASSEMBLIES Cougar offers full first-level integration capabilities, providing not just performance components but also full subsystem solutions to help
Synchronized Crystal Oscillator, General Requirements. AH-ASCMXXXG-X Series PATENT PENDING
PATENT PENDING Description The Synchronized Crystal Oscillator is intended for use in the system, which requires multiple clocks in different nodes of the system to run synchronously in frequency without
VS-800 Ultra-Low Jitter High Frequency VCSO
VS-800 Ultra-Low Jitter High Frequency VCSO VS-800 Description The VS-800 is a Voltage Controlled SAW Oscillator that operates at the fundamental frequency of the internal SAW resonator. The SAW resonator
Rakon Product Proposal
RS1490P XO `Tiger' SMD Clock Oscillator Series High Performance PLL Crystal Clock Oscillator. Product description This PLL XO offers ultra low RMS phase jitter and high frequency stability in an industry
EDCRO-200 is a stable ceramic based, sampling phase locked oscillator.
EDCRO-200 is a stable ceramic based, sampling phase locked oscillator. Commercial Military Airborne Space Missile Guidance Cable TV Links (CATV) Satellite Communications Low Cost External Reference Military/Commercial
Typical Applications Satellite and Deep Space Radiation Tolerance Required Severe Environmental Conditions. 10 MHz 40 MHz 10, 20 MHz
EX-209 Hi-Reliability Evacuated Miniature Crystal Oscillator EX-209 Features 16 pin Double Dip Package Ruggedized hybrid thick film construction Low Power Consumption Legacy Model: EX-245 Typical Applications
Dynamic Engineers Inc.
Features and Benefits Standard and custom frequencies up to 2100 MHz Femto-second (f sec.) RMS phase jitter Short lead time Typical Applications Low noise synthesizer VCO reference Optical Communication
CMOS/LVCMOS HF VCXO AE-X32BXX-X Series
CMOS/LVCMOS HF VCXO Description The AE-X32BXX Series of voltage controlled crystal oscillators (VCXO) provides high frequency with CMOS/LVCMOS output. The device does not use any frequency multiplication,
CMOS Sine. 3.3, 5.0, 12.0 or 15.0Vdc. 3.3, 5.0, 12.0 or 15.0Vdc. CMOS Sine. CMOS Sine. 3.3, 5.0, 12.0 or 15.0Vdc. LVDS (1 to 4 pairs) 3.
Q-TECH Q-Tech is the leading supplier of crystal controlled oscillators for space applications. Q-Tech has 40 years space heritage, is AS9100 certified, is the leading QPL supplier to MIL-PRF-55310 class
VS-701 High Shock Discrete Voltage Controlled SAW Oscillator
VS-701 High Shock Discrete Voltage Controlled SAW Oscillator VS-701 The VS-701 VCSO (Voltage Controlled Saw Oscillator from Vectron is a high frequency, ultra low phase noise oscillator designed to support
INC. MICROWAVE. A Spectrum Control Business
DRO Selection Guide DIELECTRIC RESONATOR OSCILLATORS Model Number Frequency Free Running, Mechanically Tuned Mechanical Tuning BW (MHz) +10 MDR2100 2.5-6.0 +10 6.0-21.0 +20 Free Running, Mechanically Tuned,
Glossary of VCO terms
Glossary of VCO terms VOLTAGE CONTROLLED OSCILLATOR (VCO): This is an oscillator designed so the output frequency can be changed by applying a voltage to its control port or tuning port. FREQUENCY TUNING
T5621 Series T5721 Series 5x7 mm Surface Mount High Reliability Tristate/Non-Tristate, 16kHz to 100MHz
Features Leadless chip carrier package is hermetically sealed for superior aging and field performance Crystal angle controlled to ±1 minute for excellent temperature stability 168 hour Class B burn-in
FMAM4032 DATA SHEET. 10 MHz to 6 GHz, Medium Power Broadband Amplifier with 900 mw, 24 db Gain and SMA. Features: Applications:
FMAM432 1 MHz to 6 GHz, Medium Power Broadband Amplifier with 9 mw, 24 db Gain and SMA FMAM432 two stage amplifier operates across a wide frequency range from 1 MHz to 6 GHz The design utilizes GaAs PHEMT
Description. Block Diagrams. Figure 1b. Crystal-Based Multiplier w/saw
C-501 oltage Controlled Crystal Oscillator C-501 Description The C-501 is a voltage controlled crystal oscillator that is housed in a hermetic 14.0 x 9.0 x 4.5mm ceramic package. Depending upon the frequency
Preliminary. 2.0 FREQUENCY CHARACTERISTICS Line Parameter Test Condition Value Unit 2.1 Frequency 8 to 1500 MHz 2.2 Operating Temperature Range
RXO5032P SMD Clock Oscillator () High Performance XO in 5 x 3.2 mm Surface Mount package Product description The RXO5032P XO combines very low RMS phase jitter and tight frequency stability in a small
Amplifiers & Components
Amplifiers & Components Catalog Products (EAR99/Non-ITAR) Amplifiers LNA High Dynamic Range Medium Power (GaN) Amplitude / Φ-matched sets Low Φ-Noise Limiters / Limiting Amps Gain Control Amps Mixers VCOs
Integrated Microwave Assemblies
Integrated Microwave Assemblies Integrated Microwave Assembly (IMA) Custom Solutions For more information please call us at 888.553.7531 API Technologies, a world class leader in component design and system
RF-LAMBDA LEADER OF RF BROADBAND SOLUTIONS
50W Broadband High Power Amplifier Module 500 2500MHz Electrical Specifications, T A = +25⁰C, Vdd = +28V Features Ultra-broadband Amplifier Module Small and lightweight Supply Voltage: +28V Parameter Min.
T5321 Series T5421 Series 5x7 mm Surface Mount High Reliability Tristate/Non-Tristate, 1MHz to 100MHz
Features Leadless chip carrier package is hermetically sealed for superior aging and field performance Crystal angle controlled to ±1 minute for excellent temperature stability 168 hour Class B burn-in
QTCT220 SERIES 2.0 x 2.5mm MINIATURE SMD TEMPERATURE CONTROLLED CRYSTAL OSCILLATORS 2.8 to 3.3Vdc MHz to 52.
5PeNdTbfTaY Q-Tech s surface-mount QTCT220 oscillators consist of an IC 3.3Vdc TCXO built in a low profile ceramic package with gold plated contact pads. Features ECCN: EAR99 Frequency range from 10.000MHz
OD100LP-Series Low Phase Noise
OD100LP-Series Low Phase Noise VCOCXO1 Description: The Connor-Winfield OD100LP-series is a low phase noise VCOCXO in a 1x1 inch metal package. The OD100LP-series is designed for those applications that
Frequency Divider, Divide by 2 Prescaler Module, 500 MHz to 18 GHz, Field Replaceable SMA
Features Divide by 2 Prescaler Wide Frequency Band GaAs HBT MMIC Technology Low Phase Noise -15 dbc/hz @ 1 khz offset Output Power -4 dbm Low Reverse Leakage Level 55 db typical Applications Electronic
VC-827 Differential (LVPECL, LVDS) Crystal Oscillator
C-827 Differential (LPECL, LDS) Crystal Oscillator C-827 Description ectron s C-827 Crystal Oscillator is a quartz stabilized, differential output oscillator, operating off a 2.5 or 3.3 volt power supply
OX-304 at 10 MHz Ultra Low Phase Noise Oven Controlled Crystal Oscillator
OX-304 at 10 MHz Ultra Low Phase Noise Oven Controlled Crystal Oscillator OX-304 The OX-304 is an Ultra Low Phase Noise Ovenized Crystal Oscillator with a noise floor as low as -173 dbc/hz in a compact
Logic & Supply Voltage: HC = HCMOS +5V L = LVHCMOS +3.3V P = LVPECL +3.3V
Description Q-Tech s surface-mount QTCV576 VCXOs consist of an IC 5Vdc,.Vdc clock square wave generator and a miniature strip AT quartz crystal built in a low profile ceramic package with gold plated contact
RF/Microwave Filters. Product & Capabilities Overview
RF/Microwave Filters Product & Capabilities Overview API LOCATIONS Filter Locations Include: Columbia, MD Design Delmar, DE Design & Manufacturing Nashua, NH Design & Manufacturing Rancho Cordova, CA Design
Solder Dip Options T = Standard S = Sn60Pb40 G=SAC305. Package 86 =Leaded 80 = Formed Leads 85=SMT
Description Q-Tech s 5x7mm LVDS and LVPECL hybrid oscillators consist of an IC operating at various supply voltages of 2.5V and 3.3Vdc and a miniature strip quartz crystal. The series is offered in various
OX-175 Ultra Low Noise Oven Controlled Crystal Oscillator
OX-175 Ultra Low Noise Oven Controlled Crystal Oscillator OX-175 The OX-175 is a low phase noise, high-frequency ovenized crystal oscillator in a 28 x 38 mm package. The oscillator has a noise floor of
3 GHz to 6 GHz Frequency Synthesizer
3 GHz to 6 GHz Frequency Synthesizer Low Phase Noise in a Lower Cost Package Features API Technologies Model LCFS1063 frequency synthesizer combines a monolithic integer-n microwave synthesizer, a reference
Features. = +25 C, Vdc = +7V
amplifiers Typical Applications The is ideal for: Microwave Radio Military & Space Test Instrumentation VSAT Functional Diagram Features Ultra Low Phase Noise: -7 dbc/hz @ khz Noise Figure: 6 db Gain:
HELLAS INDUSTRIES. for custom designs since 1980 in. Custom RF Filter & Frequency Control Solutions. Defence Avionics Medical Telecom
HELLAS Custom RF Filter & Control Solutions The Choice for custom designs since 1980 in Monolithic Crystal Filters Discrete Crystal Filters LC Filters Switch Filter assemblies Oscillators INDUSTRIES Defence
OX-249 Space Qualified Oven Controlled Crystal Oscillator (OCXO)
Common Characteristics [all frequencies and options] Supply voltage 4.75 5.0 5.25 VDC Power consumption (in air) Frequency vs. Temperature (ref. frequency at 60 minutes) Warm-up Accuracy @+25 C, (ref.
O-CDFEXYZXX-X-X-10MHz/100MHz Precision Ultra Low Phase Noise Dual Frequency OCXO Reference Module (DFRM)
O-CDFEXYZXX-X-X-10MHz/100MHz Precision Ultra Low Phase Noise Dual Frequency OCXO Reference Module (DFRM) Rev C The DFRM consists of 2 Ultra Low Phase Noise OCXO at 10 MHz and 100 MHz. The module is packaged
QT93W and QT93P SERIES HIGH-RELIABILITY LVPECL OR LVDS MINIATURE CLOCK OSCILLATORS 2.5 to 3.3Vdc - 40MHz to 250MHz Description
-TECH T9W and T9P SERIES Description -Tech s surface-mount T9 series oscillators consist of a 2.5Vdc and.vdc differential PECL or LVDS output oscillator IC and a round AT high-precision quartz crystal
PX-570 High Temperature Crystal Oscillator
PX-570 High Temperature Crystal Oscillator PX-570 Vectron offers a High Temperature Crystal Oscillator (PX-570) product platform for extreme environment applications. In addition to its wide operating
VT-841 VT-841. Temperature Compensated Crystal Oscillator. Description. Applications. Features. Block Diagram. Output V DD.
VT-841 Temperature Compensated Crystal Oscillator VT-841 Description Vectron s VT-841 Temperature Compensated Crystal Oscillator (TCXO) is a quartz stabilized, clipped sine wave output, analog temperature
Logic & Supply Voltage: HC = HCMOS +5V L = LVHCMOS +3.3V P = LVPECL +3.3V
. and 5.0Vdc -.000MHz to 56.2MHz Description Q-Tech s surface-mount QTCV56 VCXOs consist of an IC 5Vdc,.Vdc clock square wave generator and a miniature strip AT quartz crystal built in a low profile ceramic
VTC4 series Voltage Controlled Temperature Compensated Crystal Oscillator
VTC4 series Voltage Controlled Temperature Compensated Crystal Oscillator Features Clipped Sine Wave Output Output Frequencies to 27 MHz Fundamental Crystal Design Optional VCXO Function available Gold
VS-708 Single Frequency VCSO
VS-708 Single Frequency VCSO VS-708 Description The VS-708 is a Voltage Controlled SAW Oscillator that operates at the fundamental or a fraction of the internal SAW filter frequency. The SAW component
VC-827 Differential (LVPECL, LVDS) Crystal Oscillator
C-827 Differential (LPECL, LDS) Crystal Oscillator C-827 Description ectron s C-827 Crystal Oscillator is a quartz stabilized, differential output oscillator, operating off a 2.5 or 3.3 volt power supply
VC-711 Differential (LVPECL, LVDS) Crystal Oscillator
C-7 Differential (LPECL, LDS) Crystal Oscillator C-7 Description ectron s C-7 Crystal Oscillator is a quartz stabilized, differential output oscillator, operating off either a 2.5 or 3.3 volt power supply
VX-500 Voltage Controlled Crystal Oscillator
VX-00 Voltage Controlled Crystal Oscillator VX-00 Features 9x14 J-Leaded Surface Mount Package ACMOS, TTL and LVPECL Available with 4 point crystal mount for Harsh Environment Applicatio Military Temperature
Series T7250-T7258, T9250-T9258, T7001-T7013, T9301-T9313 Extended Temperature/COTS XO, 3.3V
Features 20kHz to 100MHz frequency range 5X7 SMD form factor Hermetically sealed for rugged environmental conditions Extremely wide operating temperature range accommodates harsh environments Crystals
Q-TECH CORPORATION khz QT381 AND QT386 SERIES ULTRA-LOW CURRENT, HIGH-TEMPERATURE REAL TIME CLOCK OSCILLATORS 2.5Vdc and 3.3Vdc - 32.
Description Q-Tech s high temperature real time clock oscillators consist of a source clock square wave generator and a miniature strip quartz crystal built in a low profile hermetically ceramic package
DVETR2800D Series HIGH RELIABILITY HYBRID DC-DC CONVERTERS WITH INTEGRAL EMI FILTER DESCRIPTION FEATURES
HIGH RELIABILITY HYBRID DC-DC CONVERTERS WITH INTEGRAL EMI FILTER DESCRIPTION The DVETR series of high reliability DC-DC converters is operable over the full military (-55 C to +125 C) temperature range
FMMX9003 DATA SHEET. Field Replaceable SMA IQ Mixer From 11 GHz to 16 GHz With an IF Range From DC to 3.5 GHz And LO Power of +19 dbm.
FMMX93 Field Replaceable SMA IQ Mixer From 11 GHz to 16 GHz With an IF Range From DC to 3.5 GHz And LO Power of +19 dbm FMMX93 is an I/Q double balanced millimeter-wave mixer module that operates across
FTTC05 Series LVDS TCXO/VCTCXO FOR SPACE APPLICATIONS 10M Hz to 1400MHz. ( 5 x 7 mm, SMD, 2.5 V )
REV LTR DESCRIPTION DATE APPVD. - Orig. Release 01/16/10 JSN A Revised per ECN 2012-1 11/09/12 JSN B Revised per ECN 2014-1 03/26/14 JSN C Revised per ECN 2016-2 10/21/16 JSN FTTC05 Series LVDS TCXO/VCTCXO
Description. Block Diagram. Complementary Output. Output. Crystal. Oscillator E/D
X-700 oltage Controlled Crystal Oscillator Previous ectron Model C-710 X-700 The X-700 is a oltage Controlled Crystal Oscillator that operates at the fundamental frequency of the internal HFF crystal.
MACH-ZEHNDER MODULATOR DRIVERS JSX Series
FEATURES Specifically designed for fiber optic applications Standard models for 10, 10.7 and 12.5 Gb/s data rates Product line includes linear and limiting amplifiers Gain control available Compatible
VTC2 Series Voltage Controlled Temperature Compensated Crystal Oscillator
VTC2 Series Voltage Controlled Temperature Compensated Crystal Oscillator Features CMOS Square Wave Output Enable Disable Feature Output Frequencies to 30 MHz Fundamental Crystal Design Optional VCXO function
Varactor-Tuned Oscillators. Technical Data. VTO-8000 Series
Varactor-Tuned Oscillators Technical Data VTO-8000 Series Features 600 MHz to 10.5 GHz Coverage Fast Tuning +7 to +13 dbm Output Power ± 1.5 db Output Flatness Hermetic Thin-film Construction Description
STRATUM 3E High Stability Oven Stabilized Oscillator OH300 Series OCXO / VCOCXO
Available at Digi-Key** www.digikey.com STRATUM 3E High Stability Oven Stabilized Oscillator OH300 Series OCXO / VCOCXO US Headquarters: 630-851-4722 European Headquarters: +353-61-472221 Description Connor-Winfield
Description. Block Diagram LD (10) VMON (5) Phase Detector & LD (9) FIN 4 CFOUT 1 GND (3, 7, 11, 12) Figure 1. Functional block diagram
FX-424 Low Jitter Frequency Translator FX-424 The FX-424 is a precision quartz-based frequency translator used to translate an input frequency such as 8 khz, 1.544 MHz, 2.048 MHz, 19.44 MHz etc. to any
DVHV2800D Series HIGH RELIABILITY HYBRID DC-DC CONVERTERS DESCRIPTION FEATURES
HIGH RELIABILITY HYBRID DC-DC CONVERTERS DESCRIPTION FEATURES The DVHV series of high reliability DC-DC converters is operable over the full military (-55 C to +125 C) temperature range with no power derating.
OX-175 Ultra Low Noise Oven Controlled Crystal Oscillator
OX-175 Ultra Low Noise Oven Controlled Crystal Oscillator OX-175 The OX-175 is a low phase noise, high-frequency ovenized crystal oscillator in a 28 x 38 mm package. The oscillator has a noise floor of
Welcome to the Epson SAW oscillator product training module. Epson has been providing their unique SAW oscillators that exhibit outstanding
Welcome to the Epson SAW oscillator product training module. Epson has been providing their unique SAW oscillators that exhibit outstanding stability, ultra low jitter and the ability to oscillate at a
Logic & Supply Voltage: L = LVHCMOS +3.3V at 15pF N=LVHCMOS +2.5V at 15pF R = LVHCMOS +1.8V at 15pF
Description Q-Tech s surface-mount QTCC230 oscillators consist of an IC 3.3Vdc, 2.5Vdc, and 1.8Vdc clock square wave generator and a miniature strip AT quartz crystal built in a low profile ceramic package
QTCT350 SERIES 3.2 x 5mm MINIATURE SMD TEMPERATURE CONTROLLED CRYSTAL OSCILLATORS 2.8 to 5.0Vdc MHz to 52.
Description Q-Tech s surface-mount QTCT350 oscillators consist of an IC 3.3Vdc, 5.0Vdc TCXO built in a low profile ceramic package with gold plated contact pads. Features ECCN: EAR99 Frequency range from
Features. The HMC-C072 is ideal for: Microwave Radio Military & Space Test Instrumentation VSAT. = +25 C, Vdc = +7V
amplifiers Typical Applications The is ideal for: Microwave Radio Military & Space Test Instrumentation VSAT Functional Diagram Features Ultra Low Phase Noise: -67 dbc/hz @ khz Noise Figure: 4.5 db Gain:
mto Series Page 1 of 6 MTO Rev C models +5 & ±12 +5 & ±15
28 Volt Input NOT RECOMMENDED FOR NEW DESIGNS mto Series Features 55 C to +85 C operation 16 to 36 VDC input 50 V for 50 ms transient protection Fully isolated Fixed frequency switching Inhibit function
PRELIMINARY. Logic: C = CMOS S = Sine Wave
Description Q-Tech s microcomputer compensated crystal oscillator, MCXO, uses a high stability overtone SC-cut crystal with microprocessor controlled compensation. The self-temperature sensing resonator,
SDA SMA DATA SHEET
0 to 60 db 10 Bit Programmable TTL Controlled Step Attenuator With a 006 db Step SMA Female To SMA Female From 500 MHz To 18 GHz The is a Non-Reflective 10 Bit Programmable 60 db Pin Diode Attenuator with
VS-751 VS-751. Dual Frequency VCSO. Description. Features. Applications. Block Diagram. Vcc COutput Output SAW 1 SAW 2. Vc FS Gnd
VS-751 Dual Frequency VCSO VS-751 The VS-751 is a SAW based voltage controlled oscillator that operates at the fundamental frequencies of the internal SAW filters. These SAW filters are high-q quartz devices
Ultra Low Phase Noise XO / VCXO
FEATURES: High "Q", 3rd Overtone Crystal Technology Ultra Low Phase Noise -162 Typ. @ 10k, 100MHz carrier Standard LVCMOS RF Output Wide Operating Temperature (-40ºC to +85ºC) standard ±28 ppm Max. All
Description. Block Diagram. Complementary Output. Output. Crystal. Oscillator. E/D or NC
CC6 LPECL, LDS Crystal Oscillator Data Sheet CC6 Description ectron s CC6 Crystal Oscillator is a quartz stabilized, differential output oscillator, operating off either a 2.5 or 3.3 volt supply, hermetically
Performance Specifications. Frequency Stabilities Supply Voltage (Vs) ma ma. RF Output
TX-309 Hi-Rel Temperature Compensated Crystal Oscillator TX-309 Features Radiation Tolerant Small footprint Frequency Range: 0.3 MHZ to 150 MHZ Previous Model: C2501 Applications Reference clock for space
Low Noise Oscillator series LNO 100 OCXO LNO 100
Specific request can be addressed to RAKON info@rakon.fr Product Description This Low Noise Oven Controlled Crystal Oscillator available in different footprints from 38x38x22 mm (1.5 x1.5 x0.8 ) till 25x22x12
CMOS, Ultra-low Jitter Voltage Controlled Crystal Oscillators (VCXOs)
GTJF538 series (5.0x3.2x1.4 mm, 8 pads), a member of Mercury QuikXO quick-turn Voltage Controlled Crystal Oscillators 9VCXOs), features CMOS output and femtosecond (f. sec.) RMS phase jitter (163 f. sec.
DVTR2800D Series HIGH RELIABILITY HYBRID DC-DC CONVERTERS DESCRIPTION FEATURES
HIGH RELIABILITY HYBRID DC-DC CONVERTERS DESCRIPTION The DVTR series of high reliability DC-DC converters is operable over the full military (-55 C to +125 C) temperature range with no power derating.
Microwave Filters Product & Capabilities Overview
Microwave Filters Product & Capabilities Overview API S RF, MICROWAVE & MICROELECTRONICS Dominant provider of precision-engineered, high performance RF, microwave, mmw and microelectronic solutions for
Product Guide. VIDA Oscillator Series. High Performance YIG Oscillator Westwind Blvd., Santa Rosa, CA Phone , FAX
Product Guide VIDA Oscillator Series High Performance YIG Oscillator 3579 Westwind Blvd., Santa Rosa, CA 95403 Phone 707-541-7000, FAX 707-541-7030 REV 1 Sheet 1 of 8 However, no responsibility is assumed
Hardware Repairs & Upgrades. RF/Microwave & Microelectronics Division of API Technologies
Hardware Repairs & Upgrades RF/Microwave & Microelectronics Division of API Technologies RF/Microwave & MMW Components & Integration API Technologies is a leading designer and manufacturer of RF/MW/MMW
Flight Model (FM) Lot Acceptance Test Model (LAT) Quartz Crystal. Synthetic HiQ Quartz, SC-cut, HC-35/U 4-point
in Specification AXIOM75SH Rev.: 1 Date: 2018-02-16 Oscillator type: Low Phase Noise OCXO for Space Application (COTS version) Features: Lower cost Commercial Off-The-Shelf version (COTS) Qualified according
SIR-4011 MICROWAVE WIDEBAND DSP RECEIVER. WIDE FREQUENCY RANGE: GHz
SIR-4011 MICROWAVE WIDEBAND DSP RECEIVER WIDE FREQUENCY RANGE: 0.5 18.0 GHz FEATURES Advanced Front Panel Graphics Display High Dynamic Range: In band Input IP3 > 0 dbm, NF< 15 db DSP Based AM, FM Video
VT-800 Temperature Compensated Crystal Oscillator Previous Vectron Model VTC4
VT-800 Temperature Compensated Crystal Oscillator Previous Vectron Model VTC4 VT-800 Description Vectron s VT-800 Temperature Compensated Crystal Oscillator (TCXO) is a quartz stabilized, clipped sine
VVC4 Voltage Controlled Crystal Oscillator
C4 oltage Controlled Crystal Oscillator Features ectron s Smallest CXO, 5.0 X 3.2 X 1.2 mm High Frequencies to 77.70 MHz 5.0 or 3.3 operation Linearity 10% Tri-State Output for testing Low jitter < 1ps
Ultra Low Phase Noise VCXO
FEATURES: High "Q", 3rd Overtone Crystal Technology Ultra Low Phase Noise -162 dbc/hz Typ. @ 10kHz offset, 100MHz carrier Standard LVCMOS RF Output Wide Operating Temperature (-40ºC to +85ºC) standard
OX-204 at 10 MHz Ultra Low Phase Noise Oven Controlled Crystal Oscillator
OX-204 at 10 MHz Ultra Low Phase Noise Oven Controlled Crystal Oscillator OX-204 OX-204 The OX-204 is an Ultra Low Phase Noise Ovenized Crystal Oscillator with a noise floor as low as -175 dbc/hz. Designed
J-Type Voltage Controlled Crystal Oscillator
J-Type Voltage Controlled Crystal Oscillator Product is compliant to RoHS directive and fully compatible with lead free assembly Features Output Frequencies from 1.024 MHz to 170.000 MHz +3.3 or +5.0 volt
RF and Microwave Signal Conditioning and Management
RF & microwave signal conditioning and electromagnetic spectrum management solutions, from components to complete subsystems. RF and Microwave Signal Conditioning and Management Capabilities & Certifications
DVHV2800S Series HIGH RELIABILITY HYBRID DC-DC CONVERTERS DESCRIPTION FEATURES
HIGH RELIABILITY HYBRID DC-DC CONVERTERS DESCRIPTION The DVHV series of high reliability DC-DC converters is operable over the full military (-55 C to +125 C) temperature range with no power derating.
PS-701 SAW Oscillator
PS-701 SAW Oscillator PS-701 The PS-701 SO (Saw Oscillator from Vectron is a high frequency, ultra low phase noise oscillator designed to support high speed data converters and 100G / 400G coherent optical
Low-G 222 Series OCXO
Low-G 222 Series OCXO The 222 Series is a rugged Oven Controlled Crystal Oscillator ideal for demanding military applications such as UAVs, rotorcraft, and tracked vehicles as well as harsh industrial
VX-805 Voltage Controlled Crystal Oscillator
VX-805 Voltage Controlled Crystal Oscillator VX-805 Description The VX-805 is a Voltage Control Crystal Oscillator that operates at the fundamental frequency of the internal crystal. The crystal is a high-q
VT-802 VT-802. Temperature Compensated Crystal Oscillator. Description
T-802 Temperature Compensated Crystal Oscillator T-802 Description ectron s T-802 Temperature Compensated Crystal Oscillator (TCXO) is a quartz stabilized, CMOS output, analog temperature compensated oscillator,
QTCT570 SERIES 5 x 7mm MINIATURE SMD TEMPERATURE CONTROLLED CRYSTAL OSCILLATORS 2.8 to 3.3Vdc MHz to MHz Description
Description Q-Tech s surface-mount QTCT570 oscillators consist of an IC 2.8Vdc, 3.3Vdc clock TCXO built in a low profile ceramic package with gold plated contact pads. Features ECCN: EAR99 Frequency range
Ultra Wide Band Low Noise Amplifier GHz. Electrical Specifications, TA = +25⁰C, With Vg= -5V, Vcc = +4V ~ +7V, 50 Ohm System
Ultra Wide Band Low Noise Amplifier 0.5 46GHz Parameter Min. Typ. Max. Min. Typ. Max. Units Frequency Range 0.5 20 20 46 GHz Gain 13 13 db Gain Variation Over Temperature (-45 ~ +85) ±3 ±2 db Noise Figure