HCPL-7840 Isolation Amplifier
|
|
- Emerald Oliver
- 6 years ago
- Views:
Transcription
1 Products > Optocouplers - Plastic > Plastic Miniature Isolation Amplifier > HCPL-7840 HCPL-7840 Isolation Amplifier Description The HCPL-7840 isolation amplifier family was designed for current sensing in electronic motor drives. In a typical implementation, motor currents flow through an external resistor and the resulting analog voltage drop is sensed by the HCPL A differential output voltage is created on the other side of the HCPL-7840 optical isolation barrier. This differential output voltage is proportional to the motor current and can be converted to a single-ended signal by using an op-amp. Since common-mode voltage swings of several hundred volts in tens of nanoseconds are common in modern switching inverter motor drives, the HCPL-7840 was designed to ignore very high common-mode transient slew rates (of at least 10 kv/ms). Lifecycle status: Active The high CMR capability of the HCPL-7840 isolation amplifier provides the precision and stability needed to accurately monitor motor current in high noise motor control environments, providing for smoother control (less "torque ripple") in various types of motor control applications. The product can also be used for general analog signal isolation applications requiring high accuracy, stability, and linearity under similarly severe noise conditions. For general applications, we recommend the HCPL-7840 (gain tolerance of /- 5%). The HCPL utilizes sigma delta (S-D) analog-to-digital converter technology, chopper stabilized amplifiers, and a fully differential circuit topology fabricated using Avago Technologies's 0.8 mm CMOS IC process. Together, these features deliver unequaled isolationmode noise rejection, as well as excellent offset and gain accuracy and stability over time and temperature. This performance is delivered in a compact, autoinsertable, industry standard 8-pin DIP package that meets worldwide regulatory safety standards. (A gullwing surface mount option #300 is also available). Features 15 kv/ms Common-Mode Rejection at VCM = 1000 V Compact, Auto-Insertable Standard 8-pin DIP Package V/V/ degrees C Gain Drift vs. Temperature 0.3 mv Input Offset Voltage 100 khz Bandwidth 0.004% Nonlinearity Worldwide Safety Approval: UL 1577 (3750 Vrms/1 min.) and CSA (pending), IEC/EN/DIN EN (option 060 only)
2 Isolation Amplifier Page 2 of 3 Advanced Sigma-Delta (S-D) A/D Converter Technology Fully Differential Circuit Topology 0.8 mm CMOS IC Technology Options available are: No Option = Standard DIP package, 50 per tube 060 = IEC/EN/DIN EN Option 300 = Surface Mount Option 500 = Tape/Reel Packaging Option, 1 k min. per reel XXXE = Lead Free Option Applications Motor Phase and Rail Current Sensing Inverter Current Sensing Switched Mode Power Supply Signal Isolation General Purpose Current Sensing and Monitoring General Purpose Analog Signal Isolation
3 HCPL-7840 Isolation Amplifier Data Sheet Lead (Pb) Free RoHS 6 fully compliant RoHS 6 fully compliant options available; -xxxe denotes a lead-free product Description The HCPL-7840 isolation amplifier family was designed for current sensing in electronic motor drives. In a typical implementation, motor currents flow through an external resistor and the resulting analog voltage drop is sensed by the HCPL A differential output voltage is created on the other side of the HCPL-7840 optical isolation barrier. This differential output voltage is proportional to the motor current and can be converted to a single-ended signal by using an op-amp as shown in the recommended application circuit. Since common-mode voltage swings of several hundred volts in tens of nanoseconds are common in modern switching inverter motor drives, the HCPL-7840 was designed to ignore very high commonmode transient slew rates (of at least 10 kv/µs). The high CMR capability of the HCPL-7840 isolation amplifier provides the precision and stability needed to accurately monitor motor current in high noise motor control environ-ments, providing for smoother control (less torque ripple ) in various types of motor control applications. The product can also be used for general analog signal isolation applications requiring high accuracy, stability, and linearity under similarly severe noise con-ditions. For general applications, we recommend the HCPL-7840 (gain tolerance of ± 5%). The HCPL-7840 utilizes sigma delta ( - ) analog-to-digital converter technology, chopper stabilized amplifiers, and a fully differential circuit topology fabricated using Avago s 0.8 µm CMOS IC process. Together, these features deliver unequaled isolationmode noise rejection, as well as excellent offset and gain accuracy and stability over time and temperature. This performance is delivered in a compact, auto-insertable, industry standard 8-pin DIP package that meets worldwide regulatory safety standards. (A gull-wing surface mount option #300 is also available). Features 15 kv/µs common-mode rejection at V CM = 1000 V Compact, auto-insertable standard 8-pin DIP package V/V/ C gain drift vs. temperature 0.3 mv input offset voltage 100 khz bandwidth 0.004% nonlinearity Worldwide safety approval: UL 1577 (3750 Vrms/1 min.) and CSA, IEC/EN/DIN EN (Option #060 only) Advanced Sigma-Delta ( - ) A/D converter technology Fully differential circuit topology 0.8 µm CMOS IC technology Applications Motor phase and rail current sensing Inverter current sensing Switched mode power supply signal isolation General purpose current sensing and monitoring General purpose analog signal isolation Functional Diagram V DD1 V IN+ V IN GND I DD1 + + SHIELD I DD V DD2 + GND2 A 0.1 µf bypass capacitor must be connected between pins 1 and 4 and between pins 5 and 8. CAUTION: It is advised that normal static precautions be taken in handling and assembly of this component to prevent damage and/or degradation which may be induced by ESD.
4 Ordering Information HCPL-7840 is UL Recognized with 3750 Vrms for 1 minute per UL1577. Option Part RoHS non RoHS Surface Gull Tape IEC/EN/DIN Number Compliant Compliant Package Mount Wing & Reel EN Quantity -000E no option 50 per tube -300E #300 X X 50 per tube HCPL E # mil DIP-8 X X X 1000 per reel -060E #060 X 50 per tube -360E #360 X X X 50 per tube -560E #560 X X X X 1000 per reel To order, choose a part number from the part number column and combine with the desired option from the option column to form an order entry. Example 1: HCPL E to order product of Gull Wing Surface Mount package in Tape and Reel packaging with IEC/EN/DIN EN Safety Approval and RoHS compliant. Example 2: HCPL-7840 to order product of 300 mil DIP package in Tube packaging and non RoHS compliant. Option datasheets are available. Contact your Avago sales representative or authorized distributor for information. Remarks: The notation #XXX is used for existing products, while (new) products launched since July 15, 2001 and RoHS compliant will use XXXE. 2
5 Package Outline Drawings Standard DIP Package 9.80 ± 0.25 (0.386 ± 0.010) A 7840 DATE CODE YYWW 1.19 (0.047) MAX (0.070) MAX ± 0.25 (0.300 ± 0.010) 6.35 ± 0.25 (0.250 ± 0.010) 3.56 ± 0.13 (0.140 ± 0.005) 4.70 (0.185) MAX (0.020) MIN (0.115) MIN ± (0.043 ± 0.013) 0.65 (0.025) MAX ± 0.25 (0.100 ± 0.010) 5 TYP (0.008) 0.33 (0.013) DIMENSIONS IN MILLIMETERS AND (INCHES). NOTE: FLOATING LEAD PROTRUSION IS 0.5 mm (20 mils) MAX. Note: Initial or continued variation in the color of the HCPL-7840 s white mold compound is normal and does not affect device performance or reliability. 3
6 Gull Wing Surface Mount Option 300 LAND PATTERN RECOMMENDATION 9.80 ± 0.25 (0.386 ± 0.010) (0.040) A 7840 YYWW ± 0.25 (0.250 ± 0.010) 10.9 (0.430) (0.050) 2.0 (0.080) 1.19 (0.047) MAX (0.070) MAX ± 0.13 (0.140 ± 0.005) 9.65 ± 0.25 (0.380 ± 0.010) 7.62 ± 0.25 (0.300 ± 0.010) 0.20 (0.008) 0.33 (0.013) ± (0.043 ± 0.013) 2.54 (0.100) BSC ± (0.025 ± 0.005) ± 0.25 (0.025 ± 0.010) 12 NOM. DIMENSIONS IN MILLIMETERS (INCHES). TOLERANCES (UNLESS OTHERWISE SPECIFIED): xx.xx = 0.01 xx.xxx = NOTE: FLOATING LEAD PROTRUSION IS 0.5 mm (20 mils) MAX. LEAD COPLANARITY MAXIMUM: (0.004) 4
7 Regulatory Information The HCPL-7840 has been approved by the following organizations: IEC/EN/DIN EN Approved under: IEC : A1:2002 EN : A1:2002 DIN EN (VDE 0884 Teil 2): UL Approval under UL 1577, component recognition program up to V ISO = 3750 Vrms. CSA Approved under CSA Component Acceptance Notice #5, File CA IEC/EN/DIN EN Insulation Characteristics* Description Symbol Characteristic Unit Installation classification per DIN VDE 0110/1.89, Table 1 for rated mains voltage 300 Vrms for rated mains voltage 600 Vrms Climatic Classification 55/100/21 Pollution Degree (DIN VDE 0110/1.89) 2 Maximum Working Insulation Voltage V IORM 891 V PEAK Input to Output Test Voltage, Method b** V IORM x = V PR, 100% Production Test with V PR 1670 V PEAK t m = 1 sec, Partial discharge < 5 pc Input to Output Test Voltage, Method a** V IORM x 1.5 = V PR, Type and Sample Test, V PR 1336 V PEAK t m = 60 sec, Partial discharge < 5 pc Highest Allowable Overvoltage V IOTM 6000 V PEAK (Transient Overvoltage t ini = 10 sec) Safety-limiting values maximum values allowed in the event of a failure. Case Temperature T S 175 C Input Current*** I S,INPUT 400 ma Output Power*** P S,OUTPUT 600 mw Insulation Resistance at T S, V IO = 500 V R S >10 9 Ω I-IV I-III *Insulation characteristics are guaranteed only within the safety maximum ratings which must be ensured by protective circuits within the application. Surface Mount Classification is Class A in accordance with CECC **Refer to the optocoupler section of the Isolation and Control Components Designer s Catalog, under Product Safety Regulations section, IEC/EN/DIN EN , for a detailed description of Method a and Method b partial discharge test profiles. ***Refer to the following figure for dependence of PS and IS on ambient temperature. OUTPUT POWER - P S, INPUT CURRENT - I S P S (mw) I S (ma) T A - CASE TEMPERATURE - o C
8 Insulation and Safety Related Specifications Parameter Symbol Value Unit Conditions Minimum External Air Gap (Clearance) Minimum External Tracking (Creepage) Minimum Internal Plastic Gap (Internal Clearance) Tracking Resistance (Comparative Tracking Index) L(101) 7.4 mm Measured from input terminals to output terminals, shortest distance through air. L(102) 8.0 mm Measured from input terminals to output terminals, shortest distance path along body. 0.5 mm Through insulation distance conductor to conductor, usually the straight line distance thickness between the emitter and detector. CTI >175 Volts DIN IEC 112/VDE 0303 Part 1 Isolation Group III a Material Group (DIN VDE 0110, 1/89, Table 1) Absolute Maximum Ratings Parameter Symbol Min. Max. Unit Note Storage Temperature T S C Operating Temperature T A Supply Voltage V DD1, V DD V Steady-State Input Voltage 2 Second Transient Input Voltage V IN+, V IN V DD V DD Output Voltage -0.5 V DD Solder Reflow Temperature Profile See Solder Reflow Temperature Profile Section Recommended Operating Conditions Parameter Symbol Min. Max. Unit Note Ambient Operating Temperature T A C Supply Voltage V DD1, V DD V Input Voltage (accurate and linear) V IN+, V IN mv 1 Input Voltage (functional) V IN+, V IN V 7
9 DC Electrical Specifications Unless otherwise noted, all typicals and figures are at the nominal operating conditions of V IN+ = 0, V IN- = 0 V, V DD1 = V DD2 = 5 V and T A = 25 C; all Min./Max. specifications are within the Recommended Operating Conditions. Parameter Symbol Min. Typ. Max. Unit Test Conditions Fig. Note Input Offset Voltage V OS mv T A = 25 C 1,2 Magnitude of Input Offset Change vs. Temperature mv T A = -40 C to +85 C 1,2 V OS / T A µv/ C 3 2 Gain (± 5% Tol.) G V/V -200 mv < V IN+ < 200 mv, T A = 25 C Magnitude of Gain Change vs. Temperature 4,5,6 3 G/ T A V/V/ C mv Nonlinearity NL % -200 mv < V IN+ < 200 mv 7,8 5 Magnitude of 200 mv Nonlinearity Change vs. Temperature dnl 200 /dt % / C 100 mv Nonlinearity NL % -100 mv < V IN+ < 100 mv 6 Maximum Input Voltage before Clipping V IN+ MAX mv 9 Input Supply Current I DD ma V IN+ = 400 mv 10 7 Output Supply Current I DD V IN+ = -400 mv 8 Input Current I IN µa 11 9 Magnitude of Input Bias Current vs. Temperature Coefficient di IN /dt na/ C 11 Output Low Voltage V OL 1.29 V 10 Output High Voltage V OH 3.80 V 10 Output Common-Mode Voltage Output Short-Circuit Current V OCM V I OSC 18.6 ma 11 Equivalent Input Impedance R IN 500 kω Output Resistance R OUT 15 Ω Input DC Common-Mode Rejection Ratio CMRR IN 76.1 db 12 8
10 AC Electrical Specifications Unless otherwise noted, all typicals and figures are at the nominal operating conditions of V IN+ = 0, V IN- = 0 V, V DD1 = V DD2 = 5 V and T A = 25 C; all Min./Max. specifications are within the Recommended Operating Conditions. Parameter Symbol Min. Typ. Max. Unit Test Conditions Fig. Note Bandwidth (-3 db) BW khz V IN+ = 200 mv pk-pk sine wave. Noise N OUT 31.5 mvrms V IN+ = 0.0 V 13 V IN to Signal Delay (50 10%) V IN to Signal Delay (50 50%) V IN to Signal Delay (50 90%) Rise/Fall Time (10 90%) Common Mode Transient Immunity t PD µs Measured at output of MC34081 on Figure 15. t V IN+ = 0 mv to 150 mv PD step. t PD t R/F ,13 14,15 CMTI kv/µs V CM = 1 kv, T A = 25 C Power Supply Rejection PSR 170 mvrms With recommended application circuit. 15 Package Characteristics Parameter Symbol Min. Typ. Max. Unit Test Conditions Fig. Note Input-Output Momentary Withstand Voltage Resistance (Input-Output) Capacitance (Input-Output) V ISO 3750 Vrms RH < 50%, t = 1 min., T A = 25 C R I-O >10 9 Ω V I-O = 500 V DC 18 C I-O 1.2 pf F = 1 MHz 18 16,17 9
HCPL-7800 Isolation Amplifier
Products > Optocouplers - Plastic > Plastic Miniature Isolation Amplifier > HCPL-7800 HCPL-7800 Isolation Amplifier Description The HCPL-7800 isolation amplifier family was designed for current sensing
More informationHCPL-270L/070L/273L/073L
Low Input Current, High Gain, LVTTL/LVCMOS Compatible Optocouplers Description These high gain series couplers use a Light Emitting Diode and an integrated high gain photodetector to provide extremely
More informationACPL-C87AT/ACPL-C87BT Automotive High Precision DC Voltage Isolation Sensor. Features. Applications
ACPL-CAT/ACPL-CBT Automotive High Precision DC Voltage Isolation Sensor Data Sheet Lead (Pb) Free RoHS fully compliant RoHS fully compliant options available; -xxxe denotes a lead-free product Description
More informationFeatures. Applications TRUTH TABLE (POSITIVE LOGIC) ON LOW
HCPL-5 and HCPL-5 Dual Channel, High Speed Optocouplers Data Sheet Lead (Pb) Free RoHS fully compliant RoHS fully compliant options available; -xxxe denotes a lead-free product Description These dual channel
More informationDistributed by: www.jameco.com ---44 The content and copyrights of the attached material are the property of its owner. HCPL-5, HCPL-5, HCPL-454 HCPL-5, HCPL-5, HCPL-54 Dual Channel, High Speed Optocouplers
More informationFeatures. Applications TRUTH TABLE (POSITIVE LOGIC) ON LOW
HCPL-5, HCPL-5, HCPL-454 HCPL-5, HCPL-5, HCPL-54 Dual Channel, High Speed Optocouplers Data Sheet Lead (Pb) Free RoHS fully compliant RoHS fully compliant options available; -xxxe denotes a lead-free product
More informationFeatures. Applications
ACPL-790B, ACPL-790A, ACPL-7900 Precision Isolation Amplifiers Data Sheet Description The ACPL-790B/790A/7900 isolation amplifiers were designed for current and voltage sensing in electronic power converters
More informationFeatures. Applications OFF
HCPL Power Bipolar Transistor Base Drive Optocoupler Data Sheet Description The HCPL consists of a Silicondoped GaAs LED optically coupled to an integrated circuit with a power output stage. This optocoupler
More informationIsolation Amplifier. Technical Data HCPL-7800A HCPL-7800
Isolation Amplifier Technical Data HCPL-800A HCPL-800 Features 15 kv/µs Common-Mode Rejection at V CM = 1000 V Compact, Auto-Insertable Standard 8-pin DIP Package 0.00025 V/V/ C Gain Drift vs. Temperature
More informationLow C x R, Form A, Solid State Relay (Photo MOSFET) (400V/100 /15pF) Features. Applications. Truth Table. Close
ASSR-0C and ASSR-0C Low C x R, Form A, Solid State Relay (Photo MOSFET) (00V/00 /pf) Data Sheet Lead (Pb) Free RoHS fully compliant RoHS fully compliant options available; -xxxe denotes a lead-free product
More informationDistributed by: www.jameco.com --- The content and copyrights of the attached material are the property of its owner. HCPL-, HCPL-, HCPL-,HCPL-, HCPL-, HCPL-, HCPL-, HCPL-, HCNW, HCNW Very High CMR, Wide
More informationFeatures. Applications
N5/, HCNW5/, HCNW45/ HCPL-5/45/45/5/5/45/45 Single Channel, High Speed Optocouplers Data Sheet Lead (Pb) Free RoHS fully compliant RoHS fully compliant options available; -xxxe denotes a lead-free product
More informationHCPL-270L/070L/273L/073L Low Input Current, High Gain, LVTTL/LVCMOS Compatible Optocouplers. Features. Applications V O1 V O2 GND SHIELD
HCPL-0L/00L/L/0L Low Input Current, High Gain, LVTTL/LVCMOS Compatible Optocouplers Data Sheet Description These high gain series couplers use a Light Emitting Diode and an integrated high gain photodetector
More informationData Sheet. HCPL-4562 HCNW4562 High Bandwidth, Analog/Video Optocouplers
High Bandwidth, Analog/Video Optocouplers Data Sheet Description The and optocouplers provide wide bandwidth isolation for analog signals. They are ideal for video isolation when combined with their application
More informationFeatures. Applications
HCNW45/ HCPL-45/45/45/45 Single Channel, High Speed Optocouplers Data Sheet Lead (Pb) Free RoHS fully compliant RoHS fully compliant options available; -xxxe denotes a lead-free product Description These
More informationFeatures. Applications
N5/, HCNW5/ HCPL-5/5/5 Single Channel, High Speed Optocouplers Data Sheet Lead (Pb) Free RoHS fully compliant RoHS fully compliant options available; -xxxe denotes a lead-free product Description These
More informationFeatures. Applications I DD1 V DD1 V IN+ V IN- GND1
ACPL-T Automotive Isolation Amplifier with R Coupler Isolation Data Sheet Lead (Pb) Free RoHS fully compliant RoHS fully compliant options available; -xxxe denotes a lead-free product Description The ACPL-T
More informationWide Operating Temperature Automotive Digital Optocoupler with R 2 Coupler Isolation and 5-Pin SMT Package. Features. Applications ANODE
ACPL-MT Wide Operating Temperature Automotive Digital Optocoupler with R 2 Coupler Isolation and -Pin SMT Package Data Sheet Lead (Pb) Free RoHS 6 fully compliant RoHS 6 fully compliant options available;
More informationFeatures. Applications
HCNW5/ HCPL-5/5/5/5 Single Channel, High Speed Optocouplers Data Sheet Lead (Pb) Free RoHS fully compliant RoHS fully compliant options available; -xxxe denotes a lead-free product Description These diode-transistor
More informationFeatures. Applications
ACPL-4 High CMR Intelligent Power Module and Gate Drive Interface Optocoupler Data Sheet Lead (Pb) Free RoHS fully compliant RoHS fully compliant options available; -xxxe denotes a lead-free product Description
More informationHigh CMR Intelligent Power Module and Gate Drive Interface Optocoupler. Features. Specifications. Applications
ACPL-P80 and ACPL-W80 High CMR Intelligent Power Module and Gate Drive Interface Optocoupler Data Sheet Lead (Pb) Free RoHS fully compliant RoHS fully compliant options available; -xxxe denotes a lead-free
More informationACPL-M50L, ACPL-054L, ACPL-W50L and ACPL-K54L Low Power, 1MBd Digital Optocoupler. Features. Applications GND
ACPL-M5L, ACPL-5L, ACPL-W5L and ACPL-K5L Low Power, MBd Digital Optocoupler Data Sheet Lead (Pb) Free RoHS 6 fully compliant RoHS 6 fully compliant options available; -xxxe denotes a lead-free product
More informationACNT-H50L. 1-MBd Optocoupler in 15-mm Stretched SO8 Package. Data Sheet. Description. Features. Applications. Functional Diagram
ACNT-H5L -MBd Optocoupler in 5-mm Stretched SO8 Package Description The ACNT-H5L is a single-channel -MBd optocoupler in Stretched SO8 footprint. It uses an insulating layer between the light emitting
More informationHCPL-2201, HCPL-2202, HCPL-2211,HCPL-2212, HCPL-2231, HCPL-2232, HCPL-0201, HCPL-0211, HCNW2201, HCNW2211 Very High CMR, Wide V CC
HCPL-, HCPL-, HCPL-,HCPL-, HCPL-, HCPL-, HCPL-, HCPL-, HCNW, HCNW Very High CMR, Wide Logic Gate Optocouplers Data Sheet Lead (Pb) Free RoHS fully compliant RoHS fully compliant options available; -xxxe
More informationACPL-K49T. Data Sheet
Data Sheet ACPL-K9T Wide Operating Temperature Automotive R Coupler 0-kBd Digital Optocoupler Configurable as Low-Power, Low-Leakage Phototransistor Description The ACPL-K9T is a single-channel, hightemperature,
More informationFeatures. Note: A 0.1 F bypass capacitor must be connected between pins Vcc and Ground. Specifications. Truth Table (Negative Logic)
ACPL-M483/P483/W483 Inverted Logic High CMR Intelligent Power Module and Gate Drive Interface Optocoupler Data Sheet Description The ACPL-M483/P483/W483 fast speed optocoupler contains a AlGaAs LED and
More informationFunctional Diagram ANODE CATHODE
H High Bandwidth, Analog/Video Optocouplers Technical Data Features Wide Bandwidth [] : 7 MHz () 9 MHz () High Voltage Gain [] : 2. (). () Low G V Temperature Coefficient: -.%/ C Highly Linear at Low Drive
More informationAgilent HCPL-7510 Isolated Linear Sensing IC Data Sheet
Agilent HCPL-7 Isolated Linear Sensing IC Data Sheet Description The HCPL-7 isolated linear current sensing IC family is designed for current sensing in low-power electronic motor drives. In a typical
More informationDescription The HCPL-7840 isolation amplifier provides accurate, electrically isolated and amplified representations of voltage and current.
H Analog Isolation Amplifier Technical Data HCPL- Features High Common Mode Rejection (CMR): kv/µs at V CM = V % Gain Tolerance.% Nonlinearity Low Offset Voltage and Offset Temperature Coefficient khz
More informationTRUTH TABLE (POSITIVE LOGIC) Z Z H L H H L L
HCPL-, HCPL-9 Low Input Current Logic Gate Optocouplers Data Sheet Description The HCPL-/9 are optically coupled logic gates that combine a GaAsP LED and an integrated high gain photo detector. The detector
More informationHigh Speed CMOS Optocouplers. Technical Data HCPL-7100 HCPL Features. Description. Applications. Schematic
H High Speed CMOS Optocouplers Technical Data HCPL-7100 HCPL-7101 Features 1 µm CMOS IC Technology Compatibility with All +5 V CMOS and TTL Logic Families No External Components Required for Logic Interface
More informationACPL-071L and ACPL-074L Single-channel and Dual-channel High Speed 15 MBd CMOS optocoupler with Glitch-Free Power-Up Feature.
ACPL-071L and ACPL-07L Single-channel and Dual-channel High Speed 1 MBd CMOS optocoupler with Glitch-Free Power-Up Feature Data Sheet Lead (Pb) Free RoHS fully compliant RoHS fully compliant options available;
More informationFeatures. Applications ON LOW
N9, N, HCPL-, HCPL-, HCNW9, HCNW- Low Input Current, High Gain Optocouplers Data Sheet Description These high gain series couplers use a Light Emitting Diode and an integrated high gain photodetector to
More informationACNT-H79A, ACNT-H790 Optical Isolation Amplifier in 14.2mm Stretched SO-8 Package. Features. Applications
ACNT-H79A, ACNT-H790 Optical Isolation Amplifier in 14.2mm Stretched SO-8 Package Data Sheet Description The ACNT-H79A and ACNT-H790 isolation amplifiers are designed for current and voltage sensing in
More informationHCPL-0700, HCPL-0701, HCNW138, HCNW139, 6N139, 6N138, Low Input Current, High Gain Optocouplers. Features. Applications LOW HIGH
HCPL-,, HCNW, HCNW9, N9, N, Low Input Current, High Gain Optocouplers Data Sheet Lead (Pb) Free RoHS fully compliant RoHS fully compliant options available; -xxxe denotes a lead-free product Description
More informationASSR-5211 High Current, 1 Form A, Solid State Relay (MOSFET) (600V/0.2A/16W) Features. Applications
ASSR- High Current, Form A, Solid State Relay (MOSFET) (V/.A/W) Data Sheet Lead (Pb) Free RoHS fully compliant RoHS fully compliant options available; -xxxe denotes a lead-free product Description The
More informationFeatures. Applications. NOTE: A 0.1 μf bypass capacitor must be connected between pins 1 and 4 and between pins 5 and 8.
ACPL-C79B, ACPL-C79A, ACPL-C790 Precision Miniature Isolation Amplifiers Data Sheet Description The ACPL-C79B/C79A/C790 isolation amplifiers are designed for current and voltage sensing in electronic power
More informationHCPL-7723/ MBd 2 ns PWD High Speed CMOS Optocoupler. Features. Applications
HCPL-77/07 50 MBd ns PWD High Speed CMOS Optocoupler Data Sheet Lead (Pb) Free RoHS 6 fully compliant RoHS 6 fully compliant options available; -xxxe denotes a lead-free product Description Available in
More informationACPL-P480 and ACPL-W480
High CMR Intelligent Power Module and Gate Drive Interface Optocoupler Description The high-speed ACPL-P48/W48 optocoupler contains a GaAsP LED, a photo detector, and a Schmitt trigger that eliminates
More informationASSR-3210, ASSR-3211, ASSR-3220 General Purpose, Form A, Solid State Relay (Photo MOSFET) (250V/0.2A/10Ω) Features
ASSR-0, ASSR-, ASSR-0 General Purpose, Form A, Solid State Relay (Photo MOSFET) (0V/0.A/0Ω) Data Sheet Lead (Pb) Free RoHS fully compliant RoHS fully compliant options available; -xxxe denotes a lead-free
More informationAgilent Dual Channel, High Speed Optocouplers Data Sheet
Agilent Dual Channel, High Speed Optocouplers Data Sheet HCPL-5, HCPL-5, HCPL-454 HCPL-5, HCPL-5, HCPL-54 Description These dual channel optocouplers contain a pair of light emitting diodes and integrated
More informationData Sheet. ASSR-4118, ASSR-4119 and ASSR Form A, Solid State Relay (Photo MOSFET) (400V/0.10A/35 ) Features. Description. Functional Diagram
ASSR-, ASSR-9 and ASSR- Form A, Solid State Relay (Photo MOSFET) (00V/0.0A/ ) Data Sheet Description The ASSR-XX Series consists of an AlGaAs infrared light-emitting diode (LED) input stage optically coupled
More informationData Sheet. ASSR-1218, ASSR-1219 and ASSR-1228 Form A, Solid State Relay (Photo MOSFET) (60V/0.2A/10Ω) Features. Description. Functional Diagram
ASSR-8, ASSR-9 and ASSR-8 Form A, Solid State Relay (Photo MOSFET) (0V/0.A/0Ω) Data Sheet Description The ASSR-XX Series consists of an AlGaAs infrared light-emitting diode (LED) input stage optically
More informationFeatures. Applications
ACPL-M62L Ultra Low Power MBd Digital Optocoupler Data Sheet Description The ACPL-M62L is an optically-coupled optocoupler that combines an AlGaAs light-emitting diode and an integrated high-gain photo
More informationACNV Amp Output Current IGBT Gate Drive Optocoupler in 500Mil DIP10 Package. Features. Applications
ACNV0.5 Amp Output Current IGBT Gate Drive Optocoupler in 500Mil DIP0 Package Data Sheet Description The ACNV0 contains an AlGaAs LED, which is optically coupled to an integrated circuit with a power output
More informationFeatures. Applications V DD1 V IN+ V IN- GND1
HCPL-7800A/HCPL-7800 Isolation Amplifer Datasheet Lead (Pb) Free RoHS 6 fully compliant RoHS 6 fully compliant options available; -xxxe denotes a lead-free product Description The HCPL-7800(A) isolation
More informationMIL-STD-1772 Version Available (HCPL-52XX/62XX)
H Very High CMR, Wide Logic Gate Optocouplers Technical Data HCPL- HCPL- HCPL- HCPL- HCNW HCPL- HCPL- HCPL- HCPL- HCNW Features kv/µs Minimum Common Mode Rejection (CMR) at V CM = V (HCPL-///, HCNW) Wide
More informationSingle Channel, High Speed Optocouplers Technical Data
Single Channel, High Speed Optocouplers Technical Data N5/ HCNW5/ HCNW45/ HCPL-5 HCPL-45/ HCPL-5/ HCPL-45/ Features 5 kv/µs Minimum Common Mode Transient Immunity at V CM = 5 V (45/45) High Speed: Mb/s
More informationAgilent HCPL-0738 High Speed CMOS Optocoupler
Agilent HCPL-078 High Speed CMOS Optocoupler Data Sheet Description The HCPL-078 is a dual-channel 1 MBd CMOS optocoupler in SOIC-8 package. The HCPL-078 optocoupler utilizes the latest CMOS IC technology
More informationACPL-071L and ACPL-074L Single-channel and Dual-channel High Speed 15 MBd CMOS optocoupler with Glitch-Free Power-Up Feature. Features.
ACPL-7L and ACPL-7L Single-channel and Dual-channel High Speed MBd CMOS optocoupler with Glitch-Free Power-Up Feature Data Sheet Lead (Pb) Free RoHS fully compliant RoHS fully compliant options available;
More informationFeatures. Applications I DD1 V DD1 V IN+ V IN GND1. NOTE: A 0.1 µf bypass capacitor must be connected between pins 1 and 4 and between pins 5 and 8.
HCPL-7 Isolated Linear Sensing IC Data Sheet Lead (Pb) Free RoHS 6 fully compliant RoHS 6 fully compliant options available; -xxxe denotes a lead-free product Description The HCPL-7 isolated linear current
More informationFeatures. Applications
ACPL-C87B, ACPL-C87A, ACPL-C87 Precision Optically Isolated Voltage Sensor Data Sheet Lead (Pb) Free RoHS 6 fully compliant RoHS 6 fully compliant options available; -xxxe denotes a lead-free product Description
More informationASSR-1611 High Current, 1 Form A, Solid State Relay (MOSFET) (60V/2.5A/0.1Ω) Features. Applications
ASSR- High Current, Form A, Solid State Relay (MOSFET) (V/.A/.Ω) Data Sheet Description The ASSR- is specifically designed for high current applications, commonly found in the industrial equipments. The
More informationACPL-M43T Automotive Wide Operating Temperature 1MBd Digital Optocoupler in a 5-Pin Surface Mount Plastic Package. Features. Applications.
ACPL-M43T Automotive Wide Operating Temperature MBd Digital Optocoupler in a -Pin Surface Mount Plastic Package Data Sheet Lead (Pb) Free RoHS 6 fully compliant RoHS 6 fully compliant options available;
More informationDual Channel, High Speed Optocouplers Technical Data
Dual Channel, High Speed Optocouplers Technical Data HCPL-5 HCPL-5 HCPL-454 HCPL-5 HCPL-5 HCPL-54 Features 5 kv/µs Minimum Common Mode Transient Immunity at V CM = 5 V (HCPL-454/54) High Speed: Mb/s TTL
More informationHCPL-7723/ MBd 2 ns PWD High Speed CMOS Optocoupler. Features. Applications
HCPL-7723/0723 50 MBd 2 ns PWD High Speed CMOS Optocoupler Data Sheet Lead (Pb) Free RoHS 6 fully compliant RoHS 6 fully compliant options available; -xxxe denotes a lead-free product Description Available
More informationAC/DC to Logic Interface Optocouplers Technical Data
H AC/DC to Logic Interface Optocouplers Technical Data HCPL-37 HCPL-376 Features Standard (HCPL-37) and Low Input Current (HCPL-376) Versions AC or DC Input Programmable Sense Voltage Hysteresis Logic
More informationACNV4506 Intelligent Power Module and Gate Drive Interface Optocouplers. Features. Specifications. Applications
ACNV0 Intelligent Power Module and Gate Drive Interface Optocouplers Data Sheet Description The ACNV0 device contains a GaAsP LED optically coupled to an integrated high gain photo detector. Minimized
More informationACNV2601. High Insulation Voltage 10-MBd Digital Optocoupler. Data Sheet. Description. Features. Applications
High Insulation Voltage -MBd Digital Optocoupler Description The ACNV26 is an optically coupled gate that combines an AlGaAs light-emitting diode and an integrated photo detector housed in a widebody package.
More informationDual Channel, High Speed Optocouplers Technical Data
Dual Channel, High Speed Optocouplers Technical Data HCPL-2530 HCPL-2531 HCPL-4534 HCPL-0530 HCPL-0531 HCPL-0534 Features 15 kv/µs Minimum Common Mode Transient Immunity at V CM = 1500 V (HCPL-4534/0534)
More informationData Sheet. HCPL-181 Phototransistor Optocoupler SMD Mini-Flat Type. Features
HCPL-8 Phototransistor Optocoupler SMD Mini-Flat Type Data Sheet Lead (Pb) Free RoHS 6 fully compliant RoHS 6 fully compliant options available; -xxxe denotes a lead-free product Description The HCPL-8
More informationAgilent HCPL-7800A/HCPL-7800 Isolation Amplifier
Agilent HCPL-800A/HCPL-800 Isolation Amplifier Data Sheet Description The HCPL-800(A) isolation amplifier family was designed for current sensing in electronic motor drives. In a typical implementation,
More informationFeatures. Specifications. Applications
ACPL-77L and ACPL-07L.V/V High Speed CMOS Optocoupler Data Sheet Lead (Pb) Free RoHS fully compliant RoHS fully compliant options available; -xxxe denotes a lead-free product Description Available in either
More information4N25 Phototransistor Optocoupler General Purpose Type. Features
4N Phototransistor Optocoupler General Purpose Type Data Sheet Lead (Pb) Free RoHS 6 fully compliant RoHS 6 fully compliant options available; -xxxe denotes a lead-free product Description The 4N is an
More informationDistributed by: www.jameco.com --- The content and copyrights of the attached material are the property of its owner. N, HCNW, HCNW, HCNW, HCPL-, HCPL-, HCPL-, HCPL-, HCPL-, HCPL-, HCPL-, HCPL-, HCPL-,
More informationHCPL-M454 Ultra High CMR, Small Outline, 5 Lead, High Speed Optocoupler. Features
HCPL-M44 Ultra High CMR, Small Outline, Lead, High Speed Optocoupler Data Sheet Lead (Pb) Free RoHS 6 fully compliant RoHS 6 fully compliant options available; -xxxe denotes a lead-free product Description
More informationFeatures. Applications. Truth Table (Positive Logic) LED ENABLE OUTPUT
ACNVE mm DTI, MBd Digital Optocoupler Data Sheet Description The new ACNVE is an optically coupled gate that combines a AlGaAs light emitting diode and an integrated photo detector housed in a widebody
More informationData Sheet. HCPL-181 Phototransistor Optocoupler SMD Mini-Flat Type. Description
HCPL-8 Phototransistor Optocoupler SMD Mini-Flat Type Data Sheet Lead (Pb) Free RoHS 6 fully compliant RoHS 6 fully compliant options available; -xxxe denotes a lead-free product Description The HCPL-8
More informationASSR-601JV, ASSR-601JT
Automotive Solid State Relay with R 2 Coupler TM Isolation Description The ASSR-61JV/JT is a high-voltage solid state relay that is designed for automotive applications. ASSR-61JV/JT consists of an AlGaAs
More informationFeatures. Applications
HCPL-42 Optically Coupled 2 ma Current Loop Receiver Data Sheet Lead (Pb) Free RoHS 6 fully compliant RoHS 6 fully compliant options available; -xxxe denotes a lead-free product Description The HCPL-42
More informationACPL-C87B, ACPL-C87A, ACPL-C870
Data Sheet ACPL-C87B, ACPL-C87A, ACPL-C87 Description The ACPL-C87B/C87A/C87 voltage sensors are optical isolation amplifiers designed specifically for voltage sensing. Its V input range and high -GΩ input
More informationACPL-M61U-000E Wide Operating Temperature 10MBd Digital Optocoupler. Features. Applications
ACPL-MU-E Wide Operating Temperature MBd Digital Optocoupler Data Sheet Lead (Pb) Free RoHS fully compliant RoHS fully compliant options available; -xxxe denotes a lead-free product Description This small
More informationDual Channel, High Speed Optocouplers Technical Data
Dual Channel, High Speed Optocouplers Technical Data HCPL-5 HCPL-5 HCPL-454 HCPL-5 HCPL-5 HCPL-54 Features 5 kv/µs Minimum Common Mode Transient Immunity at V CM = 5 V (HCPL-454/54) High Speed: Mb/s TTL
More informationASSR-1510, ASSR-1511, ASSR-1520, ASSR-1530
Data Sheet ASSR-, ASSR-, ASSR-, ASSR- (Photo MOSFET) (V/.A/.Ω) Description The ASSR-XX Series is specifically designed for high current applications, commonly found in the industrial applications. The
More informationACPL-P314 and ACPL-W Amp Output Current IGBT Gate Driver Optocoupler. Features. Specifications
ACPL-P and ACPL-W 0. Amp Output Current IGBT Gate Driver Optocoupler Data Sheet Lead (Pb) Free RoHS fully compliant RoHS fully compliant options available; -xxxe denotes a lead-free product Description
More informationDistributed by: www.jameco.com --- The content and copyrights of the attached material are the property of its owner. N, HCNW, HCNW, HCNW, HCPL-, HCPL-, HCPL-, HCPL-, HCPL-, HCPL-, HCPL-, HCPL-, HCPL-,
More informationFeatures. Truth Table. Applications L H
ACPL-MT Automotive Intelligent Power Module with R 2 Coupler Isolation and Small Outline, Lead Package Data Sheet Lead (Pb) Free RoHS fully compliant RoHS fully compliant options available; -xxxe denotes
More informationFeatures. Applications
Data Sheet ACSL-0 Dual-Channel (Bidirectional) -MBd CMOS Buffered Input Digital Optocoupler Description The ACSL-0 is a dual-channel bidirectional -MBd digital optocoupler that uses CMOS IC technology
More informationFeatures L H. Applications
ACPL-MU-000E Wide Operating Temperature Intelligent Power Module Optocoupler Small Outline, Leads Data Sheet Lead (Pb) Free RoHS fully compliant RoHS fully compliant options available; -xxxe denotes a
More informationACCL High Speed Quad-Channel 3/1 Digital Isolator. Data Sheet. Description. Features. Functional Diagram. Applications GND 1
High Speed Quad-Channel 3/1 Digital Isolator Description ACCL-9410 is a quad-channel bi-directional digital isolator. Using capacitive coupling through an insulation barrier, the isolator enables high
More informationFeatures. Applications
HCPL-9000/-0900, -900/-090, HCPL-90/-09, -900J/-090J, HCPL-90J/-09J, -90J/-09J High Speed Digital Isolators Data Sheet Lead (Pb) Free RoHS 6 fully compliant RoHS 6 fully compliant options available; -xxxe
More informationDual Channel Low Input Current, High Gain Optocouplers Technical Data
Dual Channel Low Input Current, High Gain Optocouplers Technical Data HCPL-7 HCPL-7 HCPL-7 HCPL-7 Features High Current Transfer Ratio % Typical Low Input Current Requirements.5 ma Low Output Saturation
More informationTelecommunication Switching Equipment Reed Relay Replacement 28 Vdc, 24 Vac, 48 Vdc Load Driver Industrial Relay Coil Driver
60 V/0.7 Ohm, General Purpose, 1 Form A, Solid State Relay Technical Data HSSR-8060 Features Compact Solid-State Bidirectional Switch Normally-Off Single-Pole Relay Function (1 Form A) 60 V Output Withstand
More informationDistributed by: www.jameco.com -8-8-22 The content and copyrights of the attached material are the property of its owner. HCPL-M, HCPL-M, HCPL-M Small Outline, Lead, High CMR, High Speed, Logic Gate Optocouplers
More informationHigh IMR, Low Cost ISOLATION AMPLIFIER
49% FPO ISO High IMR, Low Cost ISOLATION AMPLIFIER FEATURES HIGH ISOLATION-MODE REJECTION: kv/µs (min) LARGE SIGNAL BANDWIDTH: 85kHz (typ) DIFFERENTIAL INPUT/DIFFERENTIAL OUTPUT VOLTAGE OFFSET DRIFT vs
More informationOptically Coupled 20 ma Current Loop Receiver. Technical Data HCPL-4200
H Optically Coupled 2 ma Loop Receiver Technical Data OPTOCOUPLERS HCPL-42 Features Data Output Compatible with LSTTL, TTL and CMOS 2 K Baud Data Rate at 14 Metres Line Length Guaranteed Performance over
More informationHCPL-4506/J456/0466, HCNW4506 Intelligent Power Module and Gate Drive Interface Optocouplers. Features. Applications
HCPL-/J/, HCNW Intelligent Power Module and Gate Drive Interface Optocouplers Data Sheet Lead (Pb) Free RoHS fully compliant RoHS fully compliant options available; -xxxe denotes a lead-free product Description
More informationAgilent HCPL-3100/HCPL-3101 Power MOSFET/IGBT Gate Drive Optocouplers
Agilent HCPL/HCPL Power MOSFET/IGBT Gate Drive Optocouplers Data Sheet Description The HCPL/ consists of an LED* optically coupled to an integrated circuit with a power output stage. These optocouplers
More informationFeatures V O1 GND. Applications TRUTH TABLE (POSITIVE LOGIC) *5000 V rms
N, HCNW, HCNW, HCNW, HCPL-, HCPL-, HCPL-, HCPL-, HCPL-, HCPL-, HCPL-, HCPL-, HCPL-, HCPL-, HCPL- High CMR, High Speed TTL Compatible Optocouplers Data Sheet Lead (Pb) Free RoHS fully compliant RoHS fully
More informationHCPL Amp Output Current, High Speed, Gate Drive Optocoupler
HCPL-. Amp Output Current, High Speed, Gate Drive Optocoupler Data Sheet Lead (Pb) Free RoHS fully compliant RoHS fully compliant options available; -xxxe denotes a lead-free product Description This family
More informationSchematic V F HCPL-7601/11 SHIELD. USE OF A 0.1 µf BYPASS CAPACITOR CONNECTED BETWEEN PINS 5 AND 8 IS REQUIRED (SEE NOTE 1).
CMOS/TTL Compatible, Low Input Current, High Speed, High CMR Optocoupler Technical Data HCPL-7601 HCPL-7611 Features Low Input Current Version of HCPL-2601/11 and 6N137 Wide Input Current Range: I F =
More information0.4 Amp Output Current IGBT Gate Drive Optocoupler. Features. Applications
HCPL-1J. Amp Output Current IGBT Gate Drive Optocoupler Data Sheet Lead (Pb) Free RoHS fully compliant RoHS fully compliant options available; -xxxe denotes a lead-free product Description The HCPL-1J
More informationACPL-M75L Single-channel High Speed 15 MBd CMOS optocoupler with Glitch-Free Power-Up Feature. Features. Applications
ACPL-M7L Single-channel High Speed MBd CMOS optocoupler with Glitch-Free Power-Up Feature Data Sheet Lead (Pb) Free RoHS 6 fully compliant RoHS 6 fully compliant options available; -xxxe denotes a lead-free
More informationASSR-1410, ASSR-1411 and ASSR-1420
Data Sheet ASSR-0, ASSR- and ASSR-0 (Photo MOSFET) (0V/0.A/Ω) Description The ASSR-XX Series consists of an AlGaAs infrared light-emitting diode (LED) input stage optically coupled to a high-voltage output
More informationFunctional Diagram 6N137, HCPL-2601/2611 HCPL-0600/0601/0611 ANODE CATHODE TRUTH TABLE (POSITIVE LOGIC) OUTPUT H H OFF NC
High CMR, High Speed TTL Compatible Optocouplers Technical Data N HCNW HCNW HCNW HCPL- HCPL- HCPL- HCPL- HCPL- HCPL- HCPL- HCPL- HCPL- HCPL- HCPL- Features kv/µs Minimum Common Mode Rejection (CMR) at
More informationHCPL-4701/-4731/-070A/-073A Very Low Power Consumption High Gain Optocouplers HCPL-4731/073A
HCPL-/-/-A/-A Very Low Power Consumption High Gain Optocouplers Data Sheet Features Ultra low input current capability - µa Specified for V operation Typical power consumption: < mw Input power: < µw Output
More informationAgilent HCPL-3140/HCPL Amp Output Current IGBT Gate Drive Optocoupler
Agilent HCPL-/HCPL-. Amp Output Current IGBT Gate Drive Optocoupler Data Sheet Functional Diagram N/C ANODE CATHODE N/C SHIELD HCPL-/HCPL- V CC N.C. V O V EE Description The HCPL-/HCPL- family of devices
More informationACNW Amp High Output Current IGBT Gate Drive Optocoupler. Features. Applications
ACNW9. Amp High Output Current IGBT Gate Drive Optocoupler Data Sheet Lead (Pb) Free RoHS fully compliant RoHS fully compliant options available; -xxxe denotes a lead-free product Description The ACNW9
More informationIndustrial Inverters Switch Mode Power Supplies (SMPS)
H. Amp Output Current IGBT Gate Drive Optocoupler Technical Data HCPL- Features. A Minimum Peak Output Current kv/µs Minimum Common Mode Rejection (CMR) at V CM = V. V Maximum Low Level Output Voltage
More informationACPL-C797T Automotive Optically Isolated Sigma-Delta Modulator. Features. Applications
ACPL-C797T Automotive Optically Isolated Sigma-Delta Modulator Data Sheet Description The ACPL-C797T is a 1-bit, second-order sigma-delta (Σ- ) modulator that converts an analog input signal into a high-speed
More information