Data Sheet. HCPL-4562 HCNW4562 High Bandwidth, Analog/Video Optocouplers

Size: px
Start display at page:

Download "Data Sheet. HCPL-4562 HCNW4562 High Bandwidth, Analog/Video Optocouplers"

Transcription

1 High Bandwidth, Analog/Video Optocouplers Data Sheet Description The and optocouplers provide wide bandwidth isolation for analog signals. They are ideal for video isolation when combined with their application circuit (Figure 4). High linearity and low phase shift are achieved through an AlGaAs LED combined with a high speed detector. These single channel optocouplers are available in 8-Pin DIP and Widebody package configurations. Functional Diagram NC ANODE CATHODE NC V CC V B V O GND Features Wide bandwidth [] : 7 MHz () 9 MHz () High voltage gain [] :. (). () Low G V temperature coefficient: -.%/ C Highly linear at low drive currents High-speed AlGaAs emitter Safety approval: UL Recognized 75 V rms for minute (5 V rms for minute for # and ) per UL 577 CSA Approved IEC/EN/DIN EN Approved V IORM = 44 V peak for Available in 8-pin DIP and widebody packages Applications Video isolation for the following standards/formats: NTSC, PAL, SECAM, S-VHS, ANALOG RGB Low drive current feedback element in switching power supplies, e.g., for ISDN networks A/D converter signal isolation Analog signal ground isolation High voltage insulation CAUTION: It is advised that normal static precautions be taken in handling and assembly of this component to prevent damage and/or degradation which may be induced by ESD.

2 Selection Guide Single Channel Packages 8-Pin DIP Widebody ( Mil) (4 Mil) Ordering Information is UL Recognized with 75 Vrms for minute per UL577 unless otherwise specified. is UL Recognized with 5 Vrms for minute per UL577. Option Part RoHS non RoHS Surface Gull Tape UL 5 Vrms/ IEC/EN/DIN Number Compliant Compliant Package Mount Wing & Reel Minute rating EN Quantity -E no option mil DIP-8 5 per tube -E # X X 5 per tube -5E #5 X X X per reel -E # X 5 per tube -E # X X X 5 per tube -5E #5 X X X X per reel -6E #6 X [] 5 per tube -E no option 4 mil X X [] 4 per tube -E # Widebody X X X X [] 4 per tube -5E #5 DIP-8 X X X X X [] 75 per reel Notes:. IEC/EN/DIN EN V IORM = 6 V peak Safety Approval.. IEC/EN/DIN EN V IORM = 44 V peak Safety Approval. To order, choose a part number from the part number column and combine with the desired option from the option column to form an order entry. Example : -5E to order product of Gull Wing Surface Mount package in Tape and Reel packaging with UL 5 Vrms/ minute rating and RoHS compliant. Example : to order product of 8-Pin Widebody DIP package in Tube packaging with IEC/EN/DIN EN V IORM = 44 V peak Safety Approval and UL 5 Vrms/ minute rating and non RoHS compliant. Option datasheets are available. Contact your Avago sales representative or authorized distributor for information. Remarks: The notation #XXX is used for existing products, while (new) products launched since July 5, and RoHS compliant will use XXXE. Schematic ANODE + V F CATHODE I CC 8 V CC I F I O 6 V O 5 GND I B 7 V B

3 UR Package Outline Drawings 8-Pin DIP Package () 9.65 ±.5 (.8 ±.) 7.6 ±.5 (. ±.) TYPE NUMBER 8 7 A XXXXZ 6 5 OPTION CODE* DATE CODE 6.5 ±.5 (.5 ±.) YYWW 4 UL RECOGNITION.9 (.47) MAX..56 ±. (.4 ±.5).78 (.7) MAX. 4.7 (.85) MAX. 5 TYP (. +.) -.).9 (.5) MIN..5 (.) MIN..8 ±. (.4 ±.).65 (.5) MAX..54 ±.5 (. ±.) DIMENSIONS IN MILLIMETERS AND (INCHES). * MARKING CODE LETTER FOR OPTION NUMBERS "L" = OPTION OPTION NUMBERS AND 5 NOT MARKED. NOTE: FLOATING LEAD PROTRUSION IS.5 mm ( mils) MAX. 8-Pin DIP Package with Gull Wing Surface Mount Option () LAND PATTERN RECOMMENDATION 9.65 ±.5 (.8 ±.).6 (.4) ±.5 (.5 ±.).9 (.4) 4.7 (.5). (.8).9 (.47) MAX..78 (.7) MAX..56 ±. (.4 ±.5) 9.65 ±.5 (.8 ±.) 7.6 ±.5 (. ±.) (. +.) -.).8 ±. (.4 ±.) ±. (.) (.5 ±.5) BSC DIMENSIONS IN MILLIMETERS (INCHES). LEAD COPLANARITY =. mm (.4 INCHES)..65 ±.5 (.5 ±.) NOM. NOTE: FLOATING LEAD PROTRUSION IS.5 mm ( mils) MAX.

4 8-Pin Widebody DIP Package () 8.5 ±.5 (.44 ±.6) 7 6 A HCNWXXXX YYWW 5 TYPE NUMBER DATE CODE. MAX. (.4) 9. ±.5 (.54 ±.6) 4.55 (.6) MAX. 7 TYP. 5. (.) MAX..6 (.4) TYP (. +.) -.). (.).9 (.54).5 (.) MIN..54 (.) TYP..78 ±.5 (.7 ±.6).4 (.6).56 (.) DIMENSIONS IN MILLIMETERS (INCHES). NOTE: FLOATING LEAD PROTRUSION IS.5 mm ( mils) MAX. 8-Pin Widebody DIP Package with Gull Wing Surface Mount Option ().5 ±.5 (.44 ±.6) LAND PATTERN RECOMMENDATION ±.5 (.54 ±.6).56 (.54) 4. (.5).9 (.9).55 (.6) MAX.. ±. (.484 ±.). MAX. (.4) 4. (.58) MAX..78 ±.5 (.7 ±.6).54 (.) BSC DIMENSIONS IN MILLIMETERS (INCHES)..75 ±.5 (. ±.) LEAD COPLANARITY =. mm (.4 INCHES).. ±.5 (.9 ±.6) 7 NOM (. +.) -.) NOTE: FLOATING LEAD PROTRUSION IS.5 mm ( mils) MAX. 4

5 Solder Reflow Temperature Profile TEMPERATURE ( C) PREHEATING RATE C + C/.5 C/SEC. REFLOW HEATING RATE.5 C ±.5 C/SEC. 6 C 5 C 4 C C + C/.5 C.5 C ±.5 C/SEC. PREHEATING TIME 5 C, 9 + SEC. PEAK TEMP. 45 C SEC. SEC. 5 SEC. PEAK TEMP. 4 C SOLDERING TIME C PEAK TEMP. C ROOM TEMPERATURE TIME (SECONDS) TIGHT TYPICAL LOOSE Note: Non-halide flux should be used. Recommended Pb-Free IR Profile TEMPERATURE T p 6 +/-5 C T L 7 C RAMP-UP C/SEC. MAX. T smax 5 - C T smin t s PREHEAT 6 to 8 SEC. t p t L TIME WITHIN 5 C of ACTUAL PEAK TEMPERATURE -4 SEC. RAMP-DOWN 6 C/SEC. MAX. 6 to 5 SEC. 5 t 5 C to PEAK TIME NOTES: THE TIME FROM 5 C to PEAK TEMPERATURE = 8 MINUTES MAX. T smax = C, T smin = 5 C Note: Non-halide flux should be used. Regulatory Information The devices contained in this data sheet have been approved by the following organizations: UL Recognized under UL 577, Component Recognition Program, File E556. CSA Approved under CSA Component Acceptance Notice #5, File CA 884. IEC/EN/DIN EN Approved under: IEC :997 + A: EN : + A: DIN EN (VDE 884 Teil ):- ( only) 5

6 Insulation and Safety Related Specifications 8-Pin DIP Widebody ( Mil) (4 Mil) Parameter Symbol Value Value Units Conditions Minimum External L() mm Measured from input terminals to Air Gap (External output terminals, shortest distance Clearance) through air. Minimum External L() 7.4. mm Measured from input terminals to Tracking (External output terminals, shortest distance Creepage) path along body. Minimum Internal.8. mm Through insulation distance, Plastic Gap conductor to conductor, usually the (Internal Clearance) direct distance between the photoemitter and photodetector inside the optocoupler cavity. Minimum Internal NA 4. mm Measured from input terminals to Tracking (Internal output terminals, along internal cavity. Creepage) Tracking Resistance CTI Volts DIN IEC /VDE Part (Comparative Tracking Index) Isolation Group IIIa IIIa Material Group (DIN VDE, /89, Table ) Option - surface mount classification is Class A in accordance with CECC 8. IEC/EN/DIN EN Insulation Related Characteristics ( ONLY) 6 Description Symbol Characteristic Units Installation classification per DIN VDE /.89, Table for rated mains voltage 6 V rms I-IV for rated mains voltage V rms I-III Climatic Classification 55/85/ Pollution Degree (DIN VDE /.89) Maximum Working Insulation Voltage V IORM 44 V peak Input to Output Test Voltage, Method b* V IORM x.875 = V PR, % Production Test with t m = sec, V PR 65 V peak Partial Discharge < 5 pc Input to Output Test Voltage, Method a* V IORM x.5 = V PR, Type and sample test, V PR V peak t m = 6 sec, Partial Discharge < 5 pc Highest Allowable Overvoltage* (Transient Overvoltage, t ini = sec) V IOTM 8 V peak Safety Limiting Values (Maximum values allowed in the event of a failure, also see Figure 7, Thermal Derating curve.) Case Temperature T S 5 C Input Current I S,INPUT 4 ma Output Power P S,OUTPUT 7 mw Insulation Resistance at T S, V IO = 5 V R S 9 Ω *Refer to the front of the optocoupler section of the current catalog, under Product Safety Regulations section IEC/EN/DIN EN , for a detailed description. Note: Isolation characteristics are guaranteed only within the safety maximum ratings which must be ensured by protective circuits in application.

7 Absolute Maximum Ratings Parameter Symbol Device Min. Max. Units Note Storage Temperature T S C Operating Temperature T A C Average Forward Input Current I F(avg) ma 5 Peak Forward Input Current I F(PEAK) 8.6 ma 4 Effective Input Current I F(EFF).9 ma rms Reverse LED Input Voltage (Pin -) V R.8 V Input Power Dissipation P IN 4 mw Average Output Current (Pin 6) I O(AVG) 8 ma Peak Output Current (Pin 6) I O(PEAK) 6 ma Emitter-Base Reverse Voltage (Pin 5-7) V EBR 5 V Supply Voltage (Pin 8-5) V CC -. V Output Voltage (Pin 6-5) V O -. V Base Current (Pin 7) I B 5 ma Output Power Dissipation P O mw Lead Solder Temperature T LS 6 C.6 mm Below Seating Plane, Seconds up to Seating Plane, Seconds 6 C Reflow Temperature Profile T RP Option See Package Outline Drawings Section Recommended Operating Conditions Parameter Symbol Device Min. Max. Units Note Operating Temperature T A - 7 C Quiescent Input Current I FQ 6 ma Peak Input Current I F(PEAK) ma 7 7

8 Electrical Specifications (DC) T A = 5 C, I F = 6 ma for and I F = ma for (i.e., Recommended I FQ ) unless otherwise specified. Parameter Symbol Device Min. Typ.* Max. Units Test Conditions Fig. Note Base Photo I PB 65 µa I F = ma V PB 5 V, 6 Current 9. I F = 6 ma I PB I PB / -. %/ C ma < I F < ma, Temperature T V PB 5 V Coefficient I PB.5 % ma < I F < ma, 6 Nonlinearity.5 6 ma < I F < 4 ma Input Forward V F...6 V I F = 5 ma 5 Voltage..6.8 I F = ma Input Reverse BV R.8 5 V I R = µa Breakdown I R = µa Voltage Transistor h FE 6 6 I C = ma, Current Gain V CE =.5 V Current CTR 45 % V CE =.5 V, 8, 9 4 Transfer Ratio 5 V PB 5 V DC Output V OUT 4.5 V G V =, V CC = 9 V 4, Voltage

9 Small Signal Characteristics (AC) T A = 5 C, I F = 6 ma for and I F = ma for (i.e., Recommended I FO ) unless otherwise specified. Parameter Symbol Device Min. Typ.* Max. Units Test Conditions Fig. Note Voltage Gain G V V IN = V P-P 6 (. MHz). G V Temperature G V / T -. %/ C V IN = V P-P,, Coefficient f REF =. MHz Base Photo i PB.. -db V IN = V P-P,,, Current (6 MHz).6 f REF =. MHz Variation - db Frequency i PB 6 5 MHz V IN = V P-P,,, 7 (i PB ) (- db) f REF =. MHz - db Frequency G V 6 7 MHz V IN = V P-P,, 7 (G V ) (- db) 9 f REF =. MHz Gain Variation G V.. -db T A = 5 C V IN = V P-P,, (6 MHz).54 f REF =. MHz.8 T A = - C.5 T A = 7 C G V.5 -db V IN = V P-P, ( MHz).7 f REF =. MHz Differential ±. % I Fac =.7 ma p-p,, 7 8 Gain at I Fdc = to 9 ma f =.58 MHz ±.9 I Fac = ma p-p, I Fdc = 7 to ma Differential ± deg. I Fac =.7 ma p-p,, 7 9 Phase at I Fdc = to 9 ma f =.58 MHz ±.6 I Fac = ma p-p, I Fdc = 7 to ma Total Harmonic THD.5 % V IN = V P-P, 4 Distortion.75 f =.58 MHz, G V = Output Noise V O (noise) 95 µv rms Hz to MHz Voltage Isolation Mode IMRR db f = Hz, G V = 4 Rejection Ratio 9 9

10 Package Characteristics All Typicals at T A = 5 C Parameter Sym. Device Min. Typ. Max. Units Test Conditions Fig. Note Input-Output V ISO 75 V rms RH 5%, 5, Momentary 5 t = min., 5, Withstand 5 T A = 5 C 5, Voltage* (Option ) Input-Output R I-O Ω V I-O = 5 Vdc 5 Resistance T A = 5 C T A = C Input-Output C I-O.6 pf f = MHz 5 Capacitance.5.6 *The Input-Output Momentary Withstand Voltage is a dielectric voltage rating that should not be interpreted as an input-output continuous voltage rating. For the continuous voltage rating refer to the VDE 884 Insulation Related Characteristics Table (if applicable), your equipment level safety specification or Avago Application Note 74 entitled Optocoupler Input-Output Endurance Voltage, publication number 596-E. Notes:. When used in the circuit of Figure or Figure 4; G V = V OUT /V IN ; I FQ = 6 ma (HCPL- 456), I FQ = ma ().. Derate linearly above 7 C free-air temperature at a rate of. mw/ C ().. Maximum variation from the best fit line of I PB vs. I F expressed as a percentage of the peak-to-peak full scale output. 4. CURRENT TRANSFER RATIO (CTR) is defined as the ratio of output collector current, I O, to the forward LED input current, I F, times %. 5. Device considered a two-terminal device: Pins,,, and 4 shorted together and Pins 5, 6, 7, and 8 shorted together. 6. Flat-band, small-signal voltage gain. 7. The frequency at which the gain is db below the flat-band gain. 8. Differential gain is the change in the small-signal gain of the optocoupler at.58 MHz as the bias level is varied over a given range. 9. Differential phase is the change in the small-signal phase response of the optocoupler at.58 MHz as the bias level is varied over a given range.. TOTAL HARMONIC DISTORTION (THD) is defined as the square root of the sum of the square of each harmonic distortion component. The THD of the isolated video circuit is measured using a.6 kω load in series with the 5 Ω input impedance of the spectrum analyzer.. ISOLATION MODE REJECTION RATIO (IMRR), a measure of the optocoupler s ability to reject signals or noise that may exist between input and output terminals, is defined by log [(V OUT /V IN )/(V OUT / V IM )], where V IM is the isolation mode voltage signal.. In accordance with UL 577, each optocoupler is proof tested by applying an insulation test voltage 45 V rms for second (leakage detection current limit, I I-O 5 µa). This test is performed before the % Production test shown in the IEC/EN/DIN EN Insulation Related Characteristics Table, if applicable.. In accordance with UL 577, each optocoupler is proof tested by applying an insulation test voltage 6 V rms for second (leakage detection current limit, I I-O 5 µa). This test is performed before the % Production test shown in the IEC/EN/DIN EN Insulation Related Characteristics Table, if applicable.

11 6 Ω () 9.9 Ω () Figure. Gain and bandwidth test circuit. 6 Ω () 9.9 Ω () Figure. Base photo current test circuit. Figure. Base photo current frequency response test circuit. Figure 4. Recommended isolated video interface circuit.

12 I F INPUT FORWARD VOLTAGE ma.... I F + V F T A = 7 C... T A = - C.4 V F FORWARD VOLTAGE V.5 Figure 5. Input current vs. forward voltage. 8 I PB BASE PHOTO CURRENT µa V PB > 5 V I F INPUT CURRENT ma Figure 6. Base photo current vs. input current.. SMALL-SIGNAL GAIN NORMALIZED I F = 6 ma f =.58 MHz SEE FIG. PHASE GAIN SMALL-SIGNAL PHASE DEGREES I F INPUT CURRENT ma Figure 7. Small-signal response vs. input current.

13 NORMALIZED CURRENT TRANSFER RATIO NORMALIZED I F = 6. ma V CE =.5 V V PB > 5 V T TEMPERATURE C Figure 8. Current transfer ratio vs. temperature. CTR NORMALIZED CURRENT TRANSFER RATIO NORMALIZED I F = 6 ma V CE =.5 V V PB > 5 V V CE = 5. V V CE =.5 V V CE =.4 V I F INPUT CURRENT ma Figure 9. Current transfer ratio vs. input current. i PB BASE PHOTO CURRENT VARIATION db FREQUENCY = 6 MHz FREQUENCY = MHz F REF =. MHz 9 I FQ QUIESCENT INPUT CURRENT ma 8 Figure. Base photo current variation vs. bias conditions.

14 NORMALIZED VOLTAGE GAIN db T A = - C T A = 7 C NORMALIZED f =. MHz,, f FREQUENCY KHz Figure. Normalized voltage gain vs. frequency. NORMALIZED BASE PHOTO CURRENT db NORMALIZED f =. MHz,, f FREQUENCY KHz Figure. Normalized base photo current vs. frequency. PHASE DEGREES VIDEO INTERFACE CIRCUIT PHASE SEE FIGURE 4 8 I PB PHASE SEE FIGURE f FREQUENCY MHz Figure. Phase vs. frequency. 4

15 IMRR ISOLATION MODE REJECTION RATIO db db/decade SLOPE G IMRR = LOG v v OUT/v IM f FREQUENCY KHz, Figure 4. Isolation mode rejection ratio vs. frequency. 6. V O DC OUTPUT VOLTAGE V h FE TRANSISTOR CURRENT GAIN Figure 5. DC output voltage vs. transistor current gain. Q R 9 R Q 4 I CQ4 = ma R Q 5 R V CC ADDITIONAL BUFFER STAGE V OUT LOW IMPEDANCE LOAD OUTPUT POWER P S, INPUT CURRENT I S P S (mw) I S (ma) T S CASE TEMPERATURE C 75 Figure 6. Output buffer stage for low impedance loads. Figure 7. Thermal derating curve, dependence of safety limiting value with case temperature per IEC/EN/DIN EN

16 Conversion from to In order to obtain similar circuit performance when converting from the to the, it is recommended to increase the Quiescent Input Current, I FQ, from 6 ma to ma. If the application circuit in Figure 4 is used, then potentiometer R4 should be adjusted appropriately. Design Considerations of the Application Circuit The application circuit in Figure 4 incorporates several features that help maximize the bandwidth performance of the /. Most important of these features is peaked response of the detector circuit that helps extend the frequency range over which the voltage gain is relatively constant. The number of gain stages, the overall circuit topology, and the choice of DC bias points are all consequences of the desire to maximize bandwidth performance. To use the circuit, first select R to set V E for the desired LED quiescent current by: V E G V V E R I FQ = () R 4 ( I PB / I F ) R 7 R 9 For a constant value V INp-p, the circuit topology (adjusting the gain with R 4 ) preserves linearity by keeping the modulation factor (MF) dependent only on V E. i Fp-p V IN /R 4 () p-p i Fp-p i PBp-p V INp-p = () I FQ I PBQ V E Modulation i F(p-p) V INp-p Factor (MF): = (4) I FQ V E For a given G V, V E, and V CC, DC output voltage will vary only with h FEX. R 9 R V O = V CC V BE [V BEX (I PBQ I BXQ ) R 7 ] (5) 4 Where: G V V E R I PBQ (6) R 7 R 9 and, V CC V I BE BXQ (7) R 6 h FEX For 9 V < V CC < V, select the value of R such that V O 4.5 V I CQ4 9. ma (8) 47 Ω R The voltage gain of the second stage (Q ) is approximately equal to: R 9 * (9) R + s R 9 C CQ + π R f T4 Increasing R (R includes the parallel combination of R and the load impedance) or reducing R 9 (keeping R 9 /R ratio constant) will improve the bandwidth. If it is necessary to drive a low impedance load, bandwidth may also be preserved by adding an additional emitter following the buffer stage (Q 5 in Figure 6), in which case R can be increased to set I CQ4 ma. Finally, adjust R 4 to achieve the desired voltage gain. V OUT I PB R 7 R 9 G V () V IN I F R 4 R I where typically PB =. I F Definition: G V = Voltage Gain I FQ = Quiescent LED forward current i Fp-p = Peak-to-peak small signal LED forward current V INp-p = Peak-to-peak small signal input voltage i PBp-p = Peak-to-peak small signal base photo current I PBQ = Quiescent base photo current V BEX = Base-Emitter voltage of / transistor I BXQ = Quiescent base current of / transistor h FEX = Current Gain (I C /I B ) of / transistor V E = Voltage across emitter degeneration resistor R 4 f T = Unity gain frequency of Q 4 5 C CQ = Effective capacitance from collector of Q to ground 4 Figure 5 shows the dependency of the DC output voltage on h FEX. 6

17 For product information and a complete list of distributors, please go to our website: Avago, Avago Technologies, and the A logo are trademarks of Avago Technologies Limited in the United States and other countries. Data subject to change. Copyright 7 Avago Technologies Limited. All rights reserved. Obsoletes EN AV-57EN July 7, 7

Functional Diagram ANODE CATHODE

Functional Diagram ANODE CATHODE H High Bandwidth, Analog/Video Optocouplers Technical Data Features Wide Bandwidth [] : 7 MHz () 9 MHz () High Voltage Gain [] : 2. (). () Low G V Temperature Coefficient: -.%/ C Highly Linear at Low Drive

More information

HCPL-270L/070L/273L/073L

HCPL-270L/070L/273L/073L Low Input Current, High Gain, LVTTL/LVCMOS Compatible Optocouplers Description These high gain series couplers use a Light Emitting Diode and an integrated high gain photodetector to provide extremely

More information

Features. Applications

Features. Applications N5/, HCNW5/, HCNW45/ HCPL-5/45/45/5/5/45/45 Single Channel, High Speed Optocouplers Data Sheet Lead (Pb) Free RoHS fully compliant RoHS fully compliant options available; -xxxe denotes a lead-free product

More information

Features. Applications

Features. Applications HCNW45/ HCPL-45/45/45/45 Single Channel, High Speed Optocouplers Data Sheet Lead (Pb) Free RoHS fully compliant RoHS fully compliant options available; -xxxe denotes a lead-free product Description These

More information

Distributed by: www.jameco.com ---44 The content and copyrights of the attached material are the property of its owner. HCPL-5, HCPL-5, HCPL-454 HCPL-5, HCPL-5, HCPL-54 Dual Channel, High Speed Optocouplers

More information

Features. Applications TRUTH TABLE (POSITIVE LOGIC) ON LOW

Features. Applications TRUTH TABLE (POSITIVE LOGIC) ON LOW HCPL-5 and HCPL-5 Dual Channel, High Speed Optocouplers Data Sheet Lead (Pb) Free RoHS fully compliant RoHS fully compliant options available; -xxxe denotes a lead-free product Description These dual channel

More information

Features. Applications

Features. Applications N5/, HCNW5/ HCPL-5/5/5 Single Channel, High Speed Optocouplers Data Sheet Lead (Pb) Free RoHS fully compliant RoHS fully compliant options available; -xxxe denotes a lead-free product Description These

More information

HCPL-270L/070L/273L/073L Low Input Current, High Gain, LVTTL/LVCMOS Compatible Optocouplers. Features. Applications V O1 V O2 GND SHIELD

HCPL-270L/070L/273L/073L Low Input Current, High Gain, LVTTL/LVCMOS Compatible Optocouplers. Features. Applications V O1 V O2 GND SHIELD HCPL-0L/00L/L/0L Low Input Current, High Gain, LVTTL/LVCMOS Compatible Optocouplers Data Sheet Description These high gain series couplers use a Light Emitting Diode and an integrated high gain photodetector

More information

Features. Applications ON LOW

Features. Applications ON LOW N9, N, HCPL-, HCPL-, HCNW9, HCNW- Low Input Current, High Gain Optocouplers Data Sheet Description These high gain series couplers use a Light Emitting Diode and an integrated high gain photodetector to

More information

Features. Applications

Features. Applications HCNW5/ HCPL-5/5/5/5 Single Channel, High Speed Optocouplers Data Sheet Lead (Pb) Free RoHS fully compliant RoHS fully compliant options available; -xxxe denotes a lead-free product Description These diode-transistor

More information

Single Channel, High Speed Optocouplers Technical Data

Single Channel, High Speed Optocouplers Technical Data Single Channel, High Speed Optocouplers Technical Data N5/ HCNW5/ HCNW45/ HCPL-5 HCPL-45/ HCPL-5/ HCPL-45/ Features 5 kv/µs Minimum Common Mode Transient Immunity at V CM = 5 V (45/45) High Speed: Mb/s

More information

Distributed by: www.jameco.com --- The content and copyrights of the attached material are the property of its owner. HCPL-, HCPL-, HCPL-,HCPL-, HCPL-, HCPL-, HCPL-, HCPL-, HCNW, HCNW Very High CMR, Wide

More information

Features. Applications TRUTH TABLE (POSITIVE LOGIC) ON LOW

Features. Applications TRUTH TABLE (POSITIVE LOGIC) ON LOW HCPL-5, HCPL-5, HCPL-454 HCPL-5, HCPL-5, HCPL-54 Dual Channel, High Speed Optocouplers Data Sheet Lead (Pb) Free RoHS fully compliant RoHS fully compliant options available; -xxxe denotes a lead-free product

More information

Features. Applications

Features. Applications ACPL-4 High CMR Intelligent Power Module and Gate Drive Interface Optocoupler Data Sheet Lead (Pb) Free RoHS fully compliant RoHS fully compliant options available; -xxxe denotes a lead-free product Description

More information

TRUTH TABLE (POSITIVE LOGIC) Z Z H L H H L L

TRUTH TABLE (POSITIVE LOGIC) Z Z H L H H L L HCPL-, HCPL-9 Low Input Current Logic Gate Optocouplers Data Sheet Description The HCPL-/9 are optically coupled logic gates that combine a GaAsP LED and an integrated high gain photo detector. The detector

More information

HCPL-2201, HCPL-2202, HCPL-2211,HCPL-2212, HCPL-2231, HCPL-2232, HCPL-0201, HCPL-0211, HCNW2201, HCNW2211 Very High CMR, Wide V CC

HCPL-2201, HCPL-2202, HCPL-2211,HCPL-2212, HCPL-2231, HCPL-2232, HCPL-0201, HCPL-0211, HCNW2201, HCNW2211 Very High CMR, Wide V CC HCPL-, HCPL-, HCPL-,HCPL-, HCPL-, HCPL-, HCPL-, HCPL-, HCNW, HCNW Very High CMR, Wide Logic Gate Optocouplers Data Sheet Lead (Pb) Free RoHS fully compliant RoHS fully compliant options available; -xxxe

More information

Agilent Dual Channel, High Speed Optocouplers Data Sheet

Agilent Dual Channel, High Speed Optocouplers Data Sheet Agilent Dual Channel, High Speed Optocouplers Data Sheet HCPL-5, HCPL-5, HCPL-454 HCPL-5, HCPL-5, HCPL-54 Description These dual channel optocouplers contain a pair of light emitting diodes and integrated

More information

Dual Channel, High Speed Optocouplers Technical Data

Dual Channel, High Speed Optocouplers Technical Data Dual Channel, High Speed Optocouplers Technical Data HCPL-5 HCPL-5 HCPL-454 HCPL-5 HCPL-5 HCPL-54 Features 5 kv/µs Minimum Common Mode Transient Immunity at V CM = 5 V (HCPL-454/54) High Speed: Mb/s TTL

More information

Data Sheet. ASSR-1218, ASSR-1219 and ASSR-1228 Form A, Solid State Relay (Photo MOSFET) (60V/0.2A/10Ω) Features. Description. Functional Diagram

Data Sheet. ASSR-1218, ASSR-1219 and ASSR-1228 Form A, Solid State Relay (Photo MOSFET) (60V/0.2A/10Ω) Features. Description. Functional Diagram ASSR-8, ASSR-9 and ASSR-8 Form A, Solid State Relay (Photo MOSFET) (0V/0.A/0Ω) Data Sheet Description The ASSR-XX Series consists of an AlGaAs infrared light-emitting diode (LED) input stage optically

More information

Low C x R, Form A, Solid State Relay (Photo MOSFET) (400V/100 /15pF) Features. Applications. Truth Table. Close

Low C x R, Form A, Solid State Relay (Photo MOSFET) (400V/100 /15pF) Features. Applications. Truth Table. Close ASSR-0C and ASSR-0C Low C x R, Form A, Solid State Relay (Photo MOSFET) (00V/00 /pf) Data Sheet Lead (Pb) Free RoHS fully compliant RoHS fully compliant options available; -xxxe denotes a lead-free product

More information

Data Sheet. ASSR-4118, ASSR-4119 and ASSR Form A, Solid State Relay (Photo MOSFET) (400V/0.10A/35 ) Features. Description. Functional Diagram

Data Sheet. ASSR-4118, ASSR-4119 and ASSR Form A, Solid State Relay (Photo MOSFET) (400V/0.10A/35 ) Features. Description. Functional Diagram ASSR-, ASSR-9 and ASSR- Form A, Solid State Relay (Photo MOSFET) (00V/0.0A/ ) Data Sheet Description The ASSR-XX Series consists of an AlGaAs infrared light-emitting diode (LED) input stage optically coupled

More information

Dual Channel, High Speed Optocouplers Technical Data

Dual Channel, High Speed Optocouplers Technical Data Dual Channel, High Speed Optocouplers Technical Data HCPL-5 HCPL-5 HCPL-454 HCPL-5 HCPL-5 HCPL-54 Features 5 kv/µs Minimum Common Mode Transient Immunity at V CM = 5 V (HCPL-454/54) High Speed: Mb/s TTL

More information

HCPL-0700, HCPL-0701, HCNW138, HCNW139, 6N139, 6N138, Low Input Current, High Gain Optocouplers. Features. Applications LOW HIGH

HCPL-0700, HCPL-0701, HCNW138, HCNW139, 6N139, 6N138, Low Input Current, High Gain Optocouplers. Features. Applications LOW HIGH HCPL-,, HCNW, HCNW9, N9, N, Low Input Current, High Gain Optocouplers Data Sheet Lead (Pb) Free RoHS fully compliant RoHS fully compliant options available; -xxxe denotes a lead-free product Description

More information

Dual Channel, High Speed Optocouplers Technical Data

Dual Channel, High Speed Optocouplers Technical Data Dual Channel, High Speed Optocouplers Technical Data HCPL-2530 HCPL-2531 HCPL-4534 HCPL-0530 HCPL-0531 HCPL-0534 Features 15 kv/µs Minimum Common Mode Transient Immunity at V CM = 1500 V (HCPL-4534/0534)

More information

4N25 Phototransistor Optocoupler General Purpose Type. Features

4N25 Phototransistor Optocoupler General Purpose Type. Features 4N Phototransistor Optocoupler General Purpose Type Data Sheet Lead (Pb) Free RoHS 6 fully compliant RoHS 6 fully compliant options available; -xxxe denotes a lead-free product Description The 4N is an

More information

Data Sheet. HCPL-181 Phototransistor Optocoupler SMD Mini-Flat Type. Features

Data Sheet. HCPL-181 Phototransistor Optocoupler SMD Mini-Flat Type. Features HCPL-8 Phototransistor Optocoupler SMD Mini-Flat Type Data Sheet Lead (Pb) Free RoHS 6 fully compliant RoHS 6 fully compliant options available; -xxxe denotes a lead-free product Description The HCPL-8

More information

ACPL-M50L, ACPL-054L, ACPL-W50L and ACPL-K54L Low Power, 1MBd Digital Optocoupler. Features. Applications GND

ACPL-M50L, ACPL-054L, ACPL-W50L and ACPL-K54L Low Power, 1MBd Digital Optocoupler. Features. Applications GND ACPL-M5L, ACPL-5L, ACPL-W5L and ACPL-K5L Low Power, MBd Digital Optocoupler Data Sheet Lead (Pb) Free RoHS 6 fully compliant RoHS 6 fully compliant options available; -xxxe denotes a lead-free product

More information

MIL-STD-1772 Version Available (HCPL-52XX/62XX)

MIL-STD-1772 Version Available (HCPL-52XX/62XX) H Very High CMR, Wide Logic Gate Optocouplers Technical Data HCPL- HCPL- HCPL- HCPL- HCNW HCPL- HCPL- HCPL- HCPL- HCNW Features kv/µs Minimum Common Mode Rejection (CMR) at V CM = V (HCPL-///, HCNW) Wide

More information

ACPL-M43T Automotive Wide Operating Temperature 1MBd Digital Optocoupler in a 5-Pin Surface Mount Plastic Package. Features. Applications.

ACPL-M43T Automotive Wide Operating Temperature 1MBd Digital Optocoupler in a 5-Pin Surface Mount Plastic Package. Features. Applications. ACPL-M43T Automotive Wide Operating Temperature MBd Digital Optocoupler in a -Pin Surface Mount Plastic Package Data Sheet Lead (Pb) Free RoHS 6 fully compliant RoHS 6 fully compliant options available;

More information

Data Sheet. HCPL-181 Phototransistor Optocoupler SMD Mini-Flat Type. Description

Data Sheet. HCPL-181 Phototransistor Optocoupler SMD Mini-Flat Type. Description HCPL-8 Phototransistor Optocoupler SMD Mini-Flat Type Data Sheet Lead (Pb) Free RoHS 6 fully compliant RoHS 6 fully compliant options available; -xxxe denotes a lead-free product Description The HCPL-8

More information

HCPL-7840 Isolation Amplifier

HCPL-7840 Isolation Amplifier Products > Optocouplers - Plastic > Plastic Miniature Isolation Amplifier > HCPL-7840 HCPL-7840 Isolation Amplifier Description The HCPL-7840 isolation amplifier family was designed for current sensing

More information

HCPL-7800 Isolation Amplifier

HCPL-7800 Isolation Amplifier Products > Optocouplers - Plastic > Plastic Miniature Isolation Amplifier > HCPL-7800 HCPL-7800 Isolation Amplifier Description The HCPL-7800 isolation amplifier family was designed for current sensing

More information

ACNT-H50L. 1-MBd Optocoupler in 15-mm Stretched SO8 Package. Data Sheet. Description. Features. Applications. Functional Diagram

ACNT-H50L. 1-MBd Optocoupler in 15-mm Stretched SO8 Package. Data Sheet. Description. Features. Applications. Functional Diagram ACNT-H5L -MBd Optocoupler in 5-mm Stretched SO8 Package Description The ACNT-H5L is a single-channel -MBd optocoupler in Stretched SO8 footprint. It uses an insulating layer between the light emitting

More information

High CMR Intelligent Power Module and Gate Drive Interface Optocoupler. Features. Specifications. Applications

High CMR Intelligent Power Module and Gate Drive Interface Optocoupler. Features. Specifications. Applications ACPL-P80 and ACPL-W80 High CMR Intelligent Power Module and Gate Drive Interface Optocoupler Data Sheet Lead (Pb) Free RoHS fully compliant RoHS fully compliant options available; -xxxe denotes a lead-free

More information

Dual Channel Low Input Current, High Gain Optocouplers Technical Data

Dual Channel Low Input Current, High Gain Optocouplers Technical Data Dual Channel Low Input Current, High Gain Optocouplers Technical Data HCPL-7 HCPL-7 HCPL-7 HCPL-7 Features High Current Transfer Ratio % Typical Low Input Current Requirements.5 ma Low Output Saturation

More information

ASSR-3210, ASSR-3211, ASSR-3220 General Purpose, Form A, Solid State Relay (Photo MOSFET) (250V/0.2A/10Ω) Features

ASSR-3210, ASSR-3211, ASSR-3220 General Purpose, Form A, Solid State Relay (Photo MOSFET) (250V/0.2A/10Ω) Features ASSR-0, ASSR-, ASSR-0 General Purpose, Form A, Solid State Relay (Photo MOSFET) (0V/0.A/0Ω) Data Sheet Lead (Pb) Free RoHS fully compliant RoHS fully compliant options available; -xxxe denotes a lead-free

More information

ACPL-K49T. Data Sheet

ACPL-K49T. Data Sheet Data Sheet ACPL-K9T Wide Operating Temperature Automotive R Coupler 0-kBd Digital Optocoupler Configurable as Low-Power, Low-Leakage Phototransistor Description The ACPL-K9T is a single-channel, hightemperature,

More information

HCPL-M454 Ultra High CMR, Small Outline, 5 Lead, High Speed Optocoupler. Features

HCPL-M454 Ultra High CMR, Small Outline, 5 Lead, High Speed Optocoupler. Features HCPL-M44 Ultra High CMR, Small Outline, Lead, High Speed Optocoupler Data Sheet Lead (Pb) Free RoHS 6 fully compliant RoHS 6 fully compliant options available; -xxxe denotes a lead-free product Description

More information

Wide Operating Temperature Automotive Digital Optocoupler with R 2 Coupler Isolation and 5-Pin SMT Package. Features. Applications ANODE

Wide Operating Temperature Automotive Digital Optocoupler with R 2 Coupler Isolation and 5-Pin SMT Package. Features. Applications ANODE ACPL-MT Wide Operating Temperature Automotive Digital Optocoupler with R 2 Coupler Isolation and -Pin SMT Package Data Sheet Lead (Pb) Free RoHS 6 fully compliant RoHS 6 fully compliant options available;

More information

Features. Note: A 0.1 F bypass capacitor must be connected between pins Vcc and Ground. Specifications. Truth Table (Negative Logic)

Features. Note: A 0.1 F bypass capacitor must be connected between pins Vcc and Ground. Specifications. Truth Table (Negative Logic) ACPL-M483/P483/W483 Inverted Logic High CMR Intelligent Power Module and Gate Drive Interface Optocoupler Data Sheet Description The ACPL-M483/P483/W483 fast speed optocoupler contains a AlGaAs LED and

More information

Features. Applications OFF

Features. Applications OFF HCPL Power Bipolar Transistor Base Drive Optocoupler Data Sheet Description The HCPL consists of a Silicondoped GaAs LED optically coupled to an integrated circuit with a power output stage. This optocoupler

More information

Distributed by: www.jameco.com --- The content and copyrights of the attached material are the property of its owner. N, HCNW, HCNW, HCNW, HCPL-, HCPL-, HCPL-, HCPL-, HCPL-, HCPL-, HCPL-, HCPL-, HCPL-,

More information

HCPL-7723/ MBd 2 ns PWD High Speed CMOS Optocoupler. Features. Applications

HCPL-7723/ MBd 2 ns PWD High Speed CMOS Optocoupler. Features. Applications HCPL-7723/0723 50 MBd 2 ns PWD High Speed CMOS Optocoupler Data Sheet Lead (Pb) Free RoHS 6 fully compliant RoHS 6 fully compliant options available; -xxxe denotes a lead-free product Description Available

More information

ACPL-P480 and ACPL-W480

ACPL-P480 and ACPL-W480 High CMR Intelligent Power Module and Gate Drive Interface Optocoupler Description The high-speed ACPL-P48/W48 optocoupler contains a GaAsP LED, a photo detector, and a Schmitt trigger that eliminates

More information

HCPL-4506/J456/0466, HCNW4506 Intelligent Power Module and Gate Drive Interface Optocouplers. Features. Applications

HCPL-4506/J456/0466, HCNW4506 Intelligent Power Module and Gate Drive Interface Optocouplers. Features. Applications HCPL-/J/, HCNW Intelligent Power Module and Gate Drive Interface Optocouplers Data Sheet Lead (Pb) Free RoHS fully compliant RoHS fully compliant options available; -xxxe denotes a lead-free product Description

More information

Features. Applications

Features. Applications HCPL-42 Optically Coupled 2 ma Current Loop Receiver Data Sheet Lead (Pb) Free RoHS 6 fully compliant RoHS 6 fully compliant options available; -xxxe denotes a lead-free product Description The HCPL-42

More information

ASSR-1510, ASSR-1511, ASSR-1520, ASSR-1530

ASSR-1510, ASSR-1511, ASSR-1520, ASSR-1530 Data Sheet ASSR-, ASSR-, ASSR-, ASSR- (Photo MOSFET) (V/.A/.Ω) Description The ASSR-XX Series is specifically designed for high current applications, commonly found in the industrial applications. The

More information

Distributed by: www.jameco.com --- The content and copyrights of the attached material are the property of its owner. N, HCNW, HCNW, HCNW, HCPL-, HCPL-, HCPL-, HCPL-, HCPL-, HCPL-, HCPL-, HCPL-, HCPL-,

More information

Features. Applications. Truth Table (Positive Logic) LED ENABLE OUTPUT

Features. Applications. Truth Table (Positive Logic) LED ENABLE OUTPUT ACNVE mm DTI, MBd Digital Optocoupler Data Sheet Description The new ACNVE is an optically coupled gate that combines a AlGaAs light emitting diode and an integrated photo detector housed in a widebody

More information

Features. Specifications. Applications

Features. Specifications. Applications ACPL-77L and ACPL-07L.V/V High Speed CMOS Optocoupler Data Sheet Lead (Pb) Free RoHS fully compliant RoHS fully compliant options available; -xxxe denotes a lead-free product Description Available in either

More information

ACPL-M61U-000E Wide Operating Temperature 10MBd Digital Optocoupler. Features. Applications

ACPL-M61U-000E Wide Operating Temperature 10MBd Digital Optocoupler. Features. Applications ACPL-MU-E Wide Operating Temperature MBd Digital Optocoupler Data Sheet Lead (Pb) Free RoHS fully compliant RoHS fully compliant options available; -xxxe denotes a lead-free product Description This small

More information

ACNV Amp Output Current IGBT Gate Drive Optocoupler in 500Mil DIP10 Package. Features. Applications

ACNV Amp Output Current IGBT Gate Drive Optocoupler in 500Mil DIP10 Package. Features. Applications ACNV0.5 Amp Output Current IGBT Gate Drive Optocoupler in 500Mil DIP0 Package Data Sheet Description The ACNV0 contains an AlGaAs LED, which is optically coupled to an integrated circuit with a power output

More information

ACNV2601. High Insulation Voltage 10-MBd Digital Optocoupler. Data Sheet. Description. Features. Applications

ACNV2601. High Insulation Voltage 10-MBd Digital Optocoupler. Data Sheet. Description. Features. Applications High Insulation Voltage -MBd Digital Optocoupler Description The ACNV26 is an optically coupled gate that combines an AlGaAs light-emitting diode and an integrated photo detector housed in a widebody package.

More information

AC/DC to Logic Interface Optocouplers Technical Data

AC/DC to Logic Interface Optocouplers Technical Data H AC/DC to Logic Interface Optocouplers Technical Data HCPL-37 HCPL-376 Features Standard (HCPL-37) and Low Input Current (HCPL-376) Versions AC or DC Input Programmable Sense Voltage Hysteresis Logic

More information

ACNV4506 Intelligent Power Module and Gate Drive Interface Optocouplers. Features. Specifications. Applications

ACNV4506 Intelligent Power Module and Gate Drive Interface Optocouplers. Features. Specifications. Applications ACNV0 Intelligent Power Module and Gate Drive Interface Optocouplers Data Sheet Description The ACNV0 device contains a GaAsP LED optically coupled to an integrated high gain photo detector. Minimized

More information

ASSR-1611 High Current, 1 Form A, Solid State Relay (MOSFET) (60V/2.5A/0.1Ω) Features. Applications

ASSR-1611 High Current, 1 Form A, Solid State Relay (MOSFET) (60V/2.5A/0.1Ω) Features. Applications ASSR- High Current, Form A, Solid State Relay (MOSFET) (V/.A/.Ω) Data Sheet Description The ASSR- is specifically designed for high current applications, commonly found in the industrial equipments. The

More information

ACPL-071L and ACPL-074L Single-channel and Dual-channel High Speed 15 MBd CMOS optocoupler with Glitch-Free Power-Up Feature. Features.

ACPL-071L and ACPL-074L Single-channel and Dual-channel High Speed 15 MBd CMOS optocoupler with Glitch-Free Power-Up Feature. Features. ACPL-7L and ACPL-7L Single-channel and Dual-channel High Speed MBd CMOS optocoupler with Glitch-Free Power-Up Feature Data Sheet Lead (Pb) Free RoHS fully compliant RoHS fully compliant options available;

More information

High Speed CMOS Optocouplers. Technical Data HCPL-7100 HCPL Features. Description. Applications. Schematic

High Speed CMOS Optocouplers. Technical Data HCPL-7100 HCPL Features. Description. Applications. Schematic H High Speed CMOS Optocouplers Technical Data HCPL-7100 HCPL-7101 Features 1 µm CMOS IC Technology Compatibility with All +5 V CMOS and TTL Logic Families No External Components Required for Logic Interface

More information

Distributed by: www.jameco.com -8-8-22 The content and copyrights of the attached material are the property of its owner. HCPL-M, HCPL-M, HCPL-M Small Outline, Lead, High CMR, High Speed, Logic Gate Optocouplers

More information

Features. Applications

Features. Applications ACPL-M62L Ultra Low Power MBd Digital Optocoupler Data Sheet Description The ACPL-M62L is an optically-coupled optocoupler that combines an AlGaAs light-emitting diode and an integrated high-gain photo

More information

ASSR-5211 High Current, 1 Form A, Solid State Relay (MOSFET) (600V/0.2A/16W) Features. Applications

ASSR-5211 High Current, 1 Form A, Solid State Relay (MOSFET) (600V/0.2A/16W) Features. Applications ASSR- High Current, Form A, Solid State Relay (MOSFET) (V/.A/W) Data Sheet Lead (Pb) Free RoHS fully compliant RoHS fully compliant options available; -xxxe denotes a lead-free product Description The

More information

HCPL-7723/ MBd 2 ns PWD High Speed CMOS Optocoupler. Features. Applications

HCPL-7723/ MBd 2 ns PWD High Speed CMOS Optocoupler. Features. Applications HCPL-77/07 50 MBd ns PWD High Speed CMOS Optocoupler Data Sheet Lead (Pb) Free RoHS 6 fully compliant RoHS 6 fully compliant options available; -xxxe denotes a lead-free product Description Available in

More information

ASSR-601JV, ASSR-601JT

ASSR-601JV, ASSR-601JT Automotive Solid State Relay with R 2 Coupler TM Isolation Description The ASSR-61JV/JT is a high-voltage solid state relay that is designed for automotive applications. ASSR-61JV/JT consists of an AlGaAs

More information

HCPL-4701/-4731/-070A/-073A Very Low Power Consumption High Gain Optocouplers HCPL-4731/073A

HCPL-4701/-4731/-070A/-073A Very Low Power Consumption High Gain Optocouplers HCPL-4731/073A HCPL-/-/-A/-A Very Low Power Consumption High Gain Optocouplers Data Sheet Features Ultra low input current capability - µa Specified for V operation Typical power consumption: < mw Input power: < µw Output

More information

Agilent HCPL-0738 High Speed CMOS Optocoupler

Agilent HCPL-0738 High Speed CMOS Optocoupler Agilent HCPL-078 High Speed CMOS Optocoupler Data Sheet Description The HCPL-078 is a dual-channel 1 MBd CMOS optocoupler in SOIC-8 package. The HCPL-078 optocoupler utilizes the latest CMOS IC technology

More information

ACPL-071L and ACPL-074L Single-channel and Dual-channel High Speed 15 MBd CMOS optocoupler with Glitch-Free Power-Up Feature.

ACPL-071L and ACPL-074L Single-channel and Dual-channel High Speed 15 MBd CMOS optocoupler with Glitch-Free Power-Up Feature. ACPL-071L and ACPL-07L Single-channel and Dual-channel High Speed 1 MBd CMOS optocoupler with Glitch-Free Power-Up Feature Data Sheet Lead (Pb) Free RoHS fully compliant RoHS fully compliant options available;

More information

ASSR-1410, ASSR-1411 and ASSR-1420

ASSR-1410, ASSR-1411 and ASSR-1420 Data Sheet ASSR-0, ASSR- and ASSR-0 (Photo MOSFET) (0V/0.A/Ω) Description The ASSR-XX Series consists of an AlGaAs infrared light-emitting diode (LED) input stage optically coupled to a high-voltage output

More information

Functional Diagram HCPL-2400 V E V O 5 GND TRUTH TABLE (POSITIVE LOGIC) OUTPUT L Z Z

Functional Diagram HCPL-2400 V E V O 5 GND TRUTH TABLE (POSITIVE LOGIC) OUTPUT L Z Z 20 MBd High CMR Logic Gate Optocouplers Technical Data HCPL-2400 HCPL-2430 Features High Speed: 40 MBd Typical Data Rate High Common Mode Rejection: HCPL-2400: 10 kv/µs at V CM = 300 V (Typical) AC Performance

More information

Features L H. Applications

Features L H. Applications ACPL-MU-000E Wide Operating Temperature Intelligent Power Module Optocoupler Small Outline, Leads Data Sheet Lead (Pb) Free RoHS fully compliant RoHS fully compliant options available; -xxxe denotes a

More information

Functional Diagram 6N137, HCPL-2601/2611 HCPL-0600/0601/0611 ANODE CATHODE TRUTH TABLE (POSITIVE LOGIC) OUTPUT H H OFF NC

Functional Diagram 6N137, HCPL-2601/2611 HCPL-0600/0601/0611 ANODE CATHODE TRUTH TABLE (POSITIVE LOGIC) OUTPUT H H OFF NC High CMR, High Speed TTL Compatible Optocouplers Technical Data N HCNW HCNW HCNW HCPL- HCPL- HCPL- HCPL- HCPL- HCPL- HCPL- HCPL- HCPL- HCPL- HCPL- Features kv/µs Minimum Common Mode Rejection (CMR) at

More information

Agilent 4N35 Phototransistor Optocoupler General Purpose Type

Agilent 4N35 Phototransistor Optocoupler General Purpose Type Agilent N3 Phototransistor Optocoupler General Purpose Type Data Sheet Description The N3 is an optocoupler for general purpose applications. It contains a light emitting diode optically coupled to a phototransistor.

More information

HCPL Amp Output Current, High Speed, Gate Drive Optocoupler

HCPL Amp Output Current, High Speed, Gate Drive Optocoupler HCPL-. Amp Output Current, High Speed, Gate Drive Optocoupler Data Sheet Lead (Pb) Free RoHS fully compliant RoHS fully compliant options available; -xxxe denotes a lead-free product Description This family

More information

HCPL-J456 HCNW4506. Functional Diagram. 20 kω 4 SHIELD

HCPL-J456 HCNW4506. Functional Diagram. 20 kω 4 SHIELD Intelligent Power Module and Gate Drive Interface Optocouplers Technical Data HCPL- HCPL-J HCPL- HCNW Features Performance Specified for Common IPM Applications over Industrial Temperature Range: - C to

More information

ACPL-P314 and ACPL-W Amp Output Current IGBT Gate Driver Optocoupler. Features. Specifications

ACPL-P314 and ACPL-W Amp Output Current IGBT Gate Driver Optocoupler. Features. Specifications ACPL-P and ACPL-W 0. Amp Output Current IGBT Gate Driver Optocoupler Data Sheet Lead (Pb) Free RoHS fully compliant RoHS fully compliant options available; -xxxe denotes a lead-free product Description

More information

Telecommunication Switching Equipment Reed Relay Replacement 28 Vdc, 24 Vac, 48 Vdc Load Driver Industrial Relay Coil Driver

Telecommunication Switching Equipment Reed Relay Replacement 28 Vdc, 24 Vac, 48 Vdc Load Driver Industrial Relay Coil Driver 60 V/0.7 Ohm, General Purpose, 1 Form A, Solid State Relay Technical Data HSSR-8060 Features Compact Solid-State Bidirectional Switch Normally-Off Single-Pole Relay Function (1 Form A) 60 V Output Withstand

More information

20 ma Current Loop Transmitter/Receiver

20 ma Current Loop Transmitter/Receiver 2 ma Current Loop Transmitter/Receiver Product Selection Device Part No. Package Data Rate kbd @ (meters) Prop Delay CMR-V/µs @ (Vcm) HCPL-41 1 8 V CC I+ 1 HCPL-42 8 V CC HCPL-41 HCPL-42 3 mil DIP 2 4

More information

Very Low Power Consumption High Gain Optocouplers. Technical Data HCPL-4701 HCPL-4731 HCPL-070A HCPL-073A

Very Low Power Consumption High Gain Optocouplers. Technical Data HCPL-4701 HCPL-4731 HCPL-070A HCPL-073A Very Low Power Consumption High Gain Optocouplers Technical Data HCPL-4701 HCPL-4731 HCPL-070A HCPL-073A Features Ultra Low Input Current Capability - 40 µa Specified for 3 V Operation Typical Power Consumption:

More information

Data Sheet ACPL-227 / ACPL-247. DC Input Multi-Channel Half-Pitch Phototransistor Optocoupler. Description. Features. ACPL-227 pin layout

Data Sheet ACPL-227 / ACPL-247. DC Input Multi-Channel Half-Pitch Phototransistor Optocoupler. Description. Features. ACPL-227 pin layout ACPL-227 / ACPL-247 DC Input Multi-Channel Half-Pitch Phototransistor Optocoupler Data Sheet Lead (Pb) Free RoHS 6 fully compliant RoHS 6 fully compliant options available; -xxxe denotes a lead-free product

More information

Optically Coupled 20 ma Current Loop Receiver. Technical Data HCPL-4200

Optically Coupled 20 ma Current Loop Receiver. Technical Data HCPL-4200 H Optically Coupled 2 ma Loop Receiver Technical Data OPTOCOUPLERS HCPL-42 Features Data Output Compatible with LSTTL, TTL and CMOS 2 K Baud Data Rate at 14 Metres Line Length Guaranteed Performance over

More information

Features V O1 GND. Applications TRUTH TABLE (POSITIVE LOGIC) *5000 V rms

Features V O1 GND. Applications TRUTH TABLE (POSITIVE LOGIC) *5000 V rms N, HCNW, HCNW, HCNW, HCPL-, HCPL-, HCPL-, HCPL-, HCPL-, HCPL-, HCPL-, HCPL-, HCPL-, HCPL-, HCPL- High CMR, High Speed TTL Compatible Optocouplers Data Sheet Lead (Pb) Free RoHS fully compliant RoHS fully

More information

Schematic V F HCPL-7601/11 SHIELD. USE OF A 0.1 µf BYPASS CAPACITOR CONNECTED BETWEEN PINS 5 AND 8 IS REQUIRED (SEE NOTE 1).

Schematic V F HCPL-7601/11 SHIELD. USE OF A 0.1 µf BYPASS CAPACITOR CONNECTED BETWEEN PINS 5 AND 8 IS REQUIRED (SEE NOTE 1). CMOS/TTL Compatible, Low Input Current, High Speed, High CMR Optocoupler Technical Data HCPL-7601 HCPL-7611 Features Low Input Current Version of HCPL-2601/11 and 6N137 Wide Input Current Range: I F =

More information

Data Sheet. ACPL-227 / ACPL-247 DC Input Multi-Channel Half-Pitch Phototransistor Optocoupler. Description. Features. ACPL-227 pin layout

Data Sheet. ACPL-227 / ACPL-247 DC Input Multi-Channel Half-Pitch Phototransistor Optocoupler. Description. Features. ACPL-227 pin layout ACPL-227 / ACPL-247 DC Input Multi-Channel Half-Pitch Phototransistor Optocoupler Data Sheet Lead (Pb) Free RoHS 6 fully compliant RoHS 6 fully compliant options available; -xxxe denotes a lead-free product

More information

Features (I PD2 /I PD1. Applications PD2 ANODE

Features (I PD2 /I PD1. Applications PD2 ANODE HCN00 and HCN01 HighLinearity Analog Optocouplers Data Sheet Lead (Pb) Free RoHS 6 fully compliant RoHS 6 fully compliant options available; xxxe denotes a leadfree product Description The HCN00/201 highlinearity

More information

Features. Truth Table. Applications L H

Features. Truth Table. Applications L H ACPL-MT Automotive Intelligent Power Module with R 2 Coupler Isolation and Small Outline, Lead Package Data Sheet Lead (Pb) Free RoHS fully compliant RoHS fully compliant options available; -xxxe denotes

More information

CSA Approved VDE0884 Approved -V IORM = 560 Vpeak for HCPL-0466 Option 060 -V IORM = 630 Vpeak for HCPL-4506 Option 060 -V IORM = 891 Vpeak for

CSA Approved VDE0884 Approved -V IORM = 560 Vpeak for HCPL-0466 Option 060 -V IORM = 630 Vpeak for HCPL-4506 Option 060 -V IORM = 891 Vpeak for Intelligent Power Module and Gate Drive Interface Optocouplers Technical Data HCPL- HCPL-J HCPL- HCNW Features Performance Specified for Common IPM Applications over Industrial Temperature Range: - C to

More information

Agilent HCPL-3140/HCPL Amp Output Current IGBT Gate Drive Optocoupler

Agilent HCPL-3140/HCPL Amp Output Current IGBT Gate Drive Optocoupler Agilent HCPL-/HCPL-. Amp Output Current IGBT Gate Drive Optocoupler Data Sheet Functional Diagram N/C ANODE CATHODE N/C SHIELD HCPL-/HCPL- V CC N.C. V O V EE Description The HCPL-/HCPL- family of devices

More information

H11G1M, H11G2M 6-Pin DIP High Voltage Photodarlington Optocouplers

H11G1M, H11G2M 6-Pin DIP High Voltage Photodarlington Optocouplers HGM, HG2M 6-Pin DIP High Voltage Photodarlington Optocouplers Features High BV CEO : 00 V Minimum for HGM 80 V Minimum for HG2M High Sensitivity to Low Input Current (Minimum 500% CTR at I F = ma) Low

More information

ACNW Amp High Output Current IGBT Gate Drive Optocoupler. Features. Applications

ACNW Amp High Output Current IGBT Gate Drive Optocoupler. Features. Applications ACNW9. Amp High Output Current IGBT Gate Drive Optocoupler Data Sheet Lead (Pb) Free RoHS fully compliant RoHS fully compliant options available; -xxxe denotes a lead-free product Description The ACNW9

More information

Functional Diagram HCPL-4701/070A

Functional Diagram HCPL-4701/070A Very Low Power Consumption High Gain Optocouplers Technical Data HCPL- HCPL- HCPL-A HCPL-A Features Ultra Low Input Current Capability - µa Specified for peration Typical Power Consumption: < mw Input

More information

Features. Applications

Features. Applications Data Sheet ACSL-0 Dual-Channel (Bidirectional) -MBd CMOS Buffered Input Digital Optocoupler Description The ACSL-0 is a dual-channel bidirectional -MBd digital optocoupler that uses CMOS IC technology

More information

0.4 Amp Output Current IGBT Gate Drive Optocoupler. Features. Applications

0.4 Amp Output Current IGBT Gate Drive Optocoupler. Features. Applications HCPL-1J. Amp Output Current IGBT Gate Drive Optocoupler Data Sheet Lead (Pb) Free RoHS fully compliant RoHS fully compliant options available; -xxxe denotes a lead-free product Description The HCPL-1J

More information

Agilent HCPL-3100/HCPL-3101 Power MOSFET/IGBT Gate Drive Optocouplers

Agilent HCPL-3100/HCPL-3101 Power MOSFET/IGBT Gate Drive Optocouplers Agilent HCPL/HCPL Power MOSFET/IGBT Gate Drive Optocouplers Data Sheet Description The HCPL/ consists of an LED* optically coupled to an integrated circuit with a power output stage. These optocouplers

More information

Functional Diagram HCPL-261A/261N HCPL-061A/061N V CC V E GND TRUTH TABLE (POSITIVE LOGIC) OUTPUT H H OFF NC

Functional Diagram HCPL-261A/261N HCPL-061A/061N V CC V E GND TRUTH TABLE (POSITIVE LOGIC) OUTPUT H H OFF NC H HCMOS Compatible, High CMR, MBd Optocouplers Technical Data HCPL-A HCPL-A HCPL-N HCPL-N HCPL-A HCPL-A HCPL-N HCPL-N Features HCMOS/LSTTL/TTL Performance Compatible V/µs Minimum Common Mode Rejection

More information

HCPL-3120/J312, HCNW3120

HCPL-3120/J312, HCNW3120 HCPL-/J, HCNW. Amp Output Current IGBT Gate Drive Optocoupler Description The HCPL- contains a GaAsP LED while the HCPL-J and the HCNW contain an AlGaAs LED. The LED is optically coupled to an integrated

More information

Agilent HCPL-354 AC Input Phototransistor Optocoupler SMD Mini-Flat Type

Agilent HCPL-354 AC Input Phototransistor Optocoupler SMD Mini-Flat Type Agilent HCPL-34 AC Input Phototransistor Optocoupler SMD Mini-Flat Type Data Sheet Description The HCPL-34 contains a phototransistor, optically coupled to two light emitting diodes connected inverse parallel.

More information

HCPL-260L/060L/263L/063L High Speed LVTTL Compatible 3.3 Volt Optocouplers. Features. Applications V O1 GND

HCPL-260L/060L/263L/063L High Speed LVTTL Compatible 3.3 Volt Optocouplers. Features. Applications V O1 GND HCPL-L/L/L/L High Speed LVTTL Compatible. Volt Optocouplers Data Sheet Lead (Pb) Free RoHS fully compliant RoHS fully compliant options available; -xxxe denotes a lead-free product Description The HCPL-L/L/L/L

More information

Schematic LED CATHODE V F LED ANODE 2 PD1 CATHODE PD1 ANODE 4

Schematic LED CATHODE V F LED ANODE 2 PD1 CATHODE PD1 ANODE 4 HighLinearity Analog Optocouplers Technical Data HCN00 HCN01 Features Low Nonlinearity: 0.01% K 3 (I /I ) Transfer Gain HCN00: ± 15% HCN01: ± 5% Low Gain Temperature Coefficient: 65 ppm/ C Wide Bandwidth

More information

ACPL-P314 and ACPL-W Amp Output Current IGBT Gate Driver Optocoupler

ACPL-P314 and ACPL-W Amp Output Current IGBT Gate Driver Optocoupler .-Amp Output Current IGBT Gate Driver Optocoupler Description The ACPL-P/W consists of a GaAsP LED optically coupled to an integrated circuit with a power output stage. These optocouplers are ideally suited

More information

ACCL High Speed Quad-Channel 3/1 Digital Isolator. Data Sheet. Description. Features. Functional Diagram. Applications GND 1

ACCL High Speed Quad-Channel 3/1 Digital Isolator. Data Sheet. Description. Features. Functional Diagram. Applications GND 1 High Speed Quad-Channel 3/1 Digital Isolator Description ACCL-9410 is a quad-channel bi-directional digital isolator. Using capacitive coupling through an insulation barrier, the isolator enables high

More information

Features. Applications

Features. Applications HCPL-/// ns Propagation Delay, CMOS Optocoupler Data Sheet Lead (Pb) Free RoHS fully compliant RoHS fully compliant options available; -xxxe denotes a lead-free product Description Available in either

More information