RoHS Compliant Product
|
|
- Joleen Barnett
- 6 years ago
- Views:
Transcription
1 RoHS Compliant Product Description The SMSNE555 is a highly stable timer IC that can be operated in astable mode and monostable mode. For monostable mode: time delay is controlled by one external and one capacitor. For stable mode: frequency and duty cycle are accurately controlled with two external resistors and one capacitor. Features Package Dimensions High current driver capability (=200mA) Adjustable duty cycle timing form sec to hours turn off time less than 2 sec Applications Precision timing Pulse generation Time delay generation Block Diagram and Simplified Application & Pin Configuration Ref. mm mm Ref. Min. Max. Min. Max. A L A L BSC. A b D c E e 0.65 BSC. HE Jun-2006 Rev. A Page 1 of 5
2 Absolute Maximum Ratings (Ta = 25 C) Parameter Symbol alue Units Supply oltage CC 16 Differential Input oltage I O 200 ma Input oltage T lead 300 C Power Dissipation P D 440 mw Opearting, Storage Temperature T OPR, T STG 0~70, -65~150 C Electrical Characteristics (Ta = 25 C, CC = 5 ~ 15) Parameter Symbol Test Conditions Min Typ Max Units Supply oltage CC Supply Current (Note 1) I CC CC = 5, RL = ma CC = 15, RL = ma Timing Error (monostable) Initial Accurary (Note 1) A CCUR R A = 1k ~ 100kΩ % Drift with Temperature Δt/ΔT C = 0.1 μf ppm/ C Drift with Supply oltage Δt/Δ CC %/ Timing Error (astable) Initial Accurary (Note 1) A CCUR R A = 1k ~ 100kΩ % Drift with Temperature Δt/ΔT C = 0.1 μf ppm/ C Drift with Supply oltage Δt/Δ CC %/ Control oltage Threshold oltage C TH CC = CC = CC = CC = Threshold Current (Note 3) I TH μa Trigger oltage tr CC = CC = Trigger Current I tr tr = μa Reset oltage rst Reset Current I rst μa Low Output oltage High Output oltage OL OH CC = 15, I sink = 10mA CC = 15, I sink = 50mA CC = 5, I sink = 5mA CC = 15, I sink = 200mA CC = 15, I sink = 100mA CC = 5, I sink = 100mA Reset Time of Output t R nsec Fall Time of Output t F nsec Discharge leakage Current I LKG na Note 1: Supply current when output is high typically 1 ma less at CC = 5 Note 2: Tested at CC = 5 and CC = 15. Note 3: This will determine the maximum value or RA+RB for 15 operation, the maximum total is R=20MΩ, and for 5 operation the maximum total is R=6.7MΩ. 01-Jun-2006 Rev. A Page 2 of 5
3 Characteristics Curve CC = Jun-2006 Rev. A Page 3of 5
4 01-Jun-2006 Rev. A Page 4 of 5
5 Application Circuit FLIP-FLOP SPNE555 Application Notes The application circuit shows astable mode configuration. Pin 6 (Threshold) is tied to Pin 2 (Trigger) and Pin 4 (Reset) is tied to CC (Pin 8). The external capacitor C1 of Pin 6 and Pin 2 charges through RA, RB and discharge through RB only. In the internal circuit of GSCNE555, one input of the upper comparator is at voltage of 2/3CC (R1=R2=R3), another input is connected to Pin 6. As soon as C1 is charging to higher than 2/3CC, transistor Q1 is turned ON and discharge C1 to collector voltage of transistor Q1. Therefore, the flip-flop circuit is reset and output is low. One input of lower comparator is at voltage of 1/3CC, discharge transistor Q1 turn off and C1 charges through RA and RB. Therefore, flip-flop circuit is set output high. That is, when C1 charges through RA and RB, output is high and when C1 discharge through RB, output is low. The charge time (output is high) t1 is (RA+RB) C1 and the discharge time (output is low) T2 is 0.693RB*C1. In 1 cc - cc 3 cc cc =0.693 Thus the total period time T is given by T1=0.693*(RA+RB)*C1 T2=0.693*RB*C1 T=T1+T2=0.693(RA+2RB)*C1 Then the frequency of astable mode is given by 1 f = = T 1.44 (RA+2RB)*C1 The duty cycle is given by T2 D.C. = = T RB RA+2RB 01-Jun-2006 Rev. A Page 5of 5
UNISONIC TECHNOLOGIES CO., LTD
SINGLE TIMER UNISONIC TECHNOLOGIES CO., LTD DESCRIPTION The UTC NE555 is a highly stable timer integrated circuit. It can be operated in both Astable and Monostable mode. With monostable operation, the
More informationORDERING INFORMATION
The LM555/I is a highly stable controller capable of producing accurate timing pulses. With monostable operation, the time delay is controlled by one external and one capacitor. With astable operation,
More informationPIN CONFIGURATION FEATURES APPLICATIONS BLOCK DIAGRAM. D, F, N Packages
DESCRIPTION Both the and - Dual Monolithic timing circuits are highly stable controllers capable of producing accurate time delays or oscillation. The and - are a dual. Timing is provided by an external
More informationZSCT1555 PRECISION SINGLE CELL TIMER ISSUE 2 - MAY 1998 DEVICE DESCRIPTION FEATURES APPLICATIONS SCHEMATIC DIAGRAM
PRECISION SINGLE CELL TIMER ZSCT555 ISSUE 2 - MAY 998 DEVICE DESCRIPTION These devices are precision timing circuits for generation of accurate time delays or oscillation. Advanced circuit design means
More informationDistributed by: www.jameco.com -800-8- The content and copyrights of the attached material are the property of its owner. NE SA - SE GENERAL PURPOSE SINGLE BIPOLAR TIMERS LOW TURN OFF TIME MAXIMUM OPERATING
More informationNE556 SA556 - SE556 GENERAL PURPOSE DUAL BIPOLAR TIMERS
NE556 SA556 - SE556 GENERAL PURPOSE DUAL BIPOLAR TIMERS LOW TURN OFF TIME MAXIMUM OPERATING FREQUENCY GREATER THAN 500kHz TIMING FROM MICROSECONDS TO HOURS OPERATES IN BOTH ASTABLE AND MONOSTABLE MODES
More informationLM555/NE555/SA555 Single Timer
Single Timer www.fairchildsemi.com Features High Current Drive Capability (00mA) Adjustable Duty Cycle Temperature Stability of 0.005%/ C Timing From µsec to Hours Turn off Time Less Than µsec Applications
More informationDesignated client product
Designated client product This product will be discontinued its production in the near term. And it is provided for customers currently in use only, with a time limit. It can not be available for your
More informationLM555. Single Timer. Description. Features. Applications. Internal Block Diagram. Vcc GND. Trigger. Discharge. Output F/F. Threshold.
Single Timer www.fairchildsemi.com Features High Current Drive Capability (00mA) Adjustable Duty Cycle Temperature Stability of 0.005%/ C Timing From μsec to Hours Turn off Time Less Than μsec Applications
More informationMC3456 DUAL TIMING CIRCUIT
Order this document by /D The dual timing circuit is a highly stable controller capable of producing accurate time delays, or oscillation. Additional terminals are provided for triggering or resetting
More informationL M 5 5 5/N E 5 5 5/S A 5 5 5
L M 5 5 5/N E 5 5 5/S A 5 5 5 S i n g l e T i m e r www.fairchildsemi.com Features High Current Drive Capability (00mA) Adjustable Duty Cycle Temperature Stability of 0.005%/ C Timing From µsec to Hours
More informationcss Custom Silicon Solutions, Inc.
css Custom Silicon Solutions, Inc. GENERAL PART DESCRIPTION The is a micropower version of the popular timer IC. It features an operating current under µa and a minimum supply voltage of., making it ideal
More informationUNISONIC TECHNOLOGIES CO., LTD USA555 Advance LINEAR INTEGRATED CIRCUIT
UNISONIC TECHNOLOGIES CO., LTD PRECISION TIMERS DESCRIPTION The UTC USA555 monolithic timing circuit is a highly stable controller capable of producing accurate time delays or oscillation. In the time-delay
More information. HIGH MAXIMUM ASTABLE FREQUENCY 2.7MHz PIN-TO-PIN AND FUNCTIONALLY COMPATIBLE WITH BIPOLAR NE555
TS555C,I,M LOW POWER SINGLE CMOS TIMERS. ERY LOW POWER CONSUMPTION : 100µA typ at CC = 5. HIGH MAXIMUM ASTABLE FREQUENCY 2.7MHz PIN-TO-PIN AND FUNCTIONALLY COMPATIBLE WITH BIPOLAR NE555. OLTAGE RANGE :
More informationTIMING CIRCUIT SEMICONDUCTOR TECHNICAL DATA ORDERING INFORMATION. Figure Second Solid State Time Delay Relay Circuit
The MC1455 monolithic timing circuit is a highly stable controller capable of producing accurate time delays or oscillation. Additional terminals are provided for triggering or resetting if desired. In
More informationIntroduction to IC-555. Compiled By: Chanakya Bhatt EE, IT-NU
Introduction to IC-555 Compiled By: Chanakya Bhatt EE, IT-NU Introduction SE/NE 555 is a Timer IC introduced by Signetics Corporation in 1970 s. It is basically a monolithic timing circuit that produces
More informationFeatures. Applications
LM555 Timer General Description The LM555 is a highly stable device for generating accurate time delays or oscillation. Additional terminals are provided for triggering or resetting if desired. In the
More informationTS555. Low power single CMOS timer. Features. Description
Low power single CMOS timer Features ery low power consumption: 110 µa typ at CC = 5 90 µa typ at CC = 3 High maximum astable frequency of 2.7 MHz Pin-to-pin functionally-compatible with bipolar NE555
More informationDUAL TIMING CIRCUIT SEMICONDUCTOR TECHNICAL DATA PIN CONNECTIONS ORDERING INFORMATION. Figure Second Solid State Time Delay Relay Circuit
The MC3456 dual timing circuit is a highly stable controller capable of producing accurate time delays, or oscillation. Additional terminals are provided for triggering or resetting if desired. In the
More informationNE555, SA555, SE555 PRECISION TIMERS
Timing From Microseconds to Hours Astable or Monostable Operation Adjustable Duty Cycle TTL-Compatible Output Can Sink or Source up to 00 ma Designed To Be Interchangeable With Signetics NE, SA, and SE
More informationNE555 SA555 - SE555 General-purpose single bipolar timers Features Description
NE555 SA555 - SE555 General-purpose single bipolar timers Features Low turn-off time Maximum operating frequency greater than 500 khz Timing from microseconds to hours Operates in both astable and monostable
More informationLM556 Dual Timer. an external resistor and capacitor for each timing Adjustable Duty Cycle
1 LM556 Dual Timer LM556 SNAS549A MARCH 2000 REVISED OCTOBER 2015 1 Features 3 Description 1 Direct Replacement for SE556/NE556 The LM556 dual-timing circuit is a highly-stable controller capable of producing
More informationCA555, CA555C, LM555, LM555C, NE555
May 99 SEMICONDUCTOR CA, CAC, LM, LMC, NE Timers for Timing Delays and Oscillator Application in Commercial, Industrial and Military Equipment Features Accurate Timing From Microseconds Through Hours Astable
More informationApplications. NS Part Number SMD Part Number NS Package Number Package Description LM555H/883 H08A 8LD Metal Can LM555J/883 J08A 8LD Ceramic Dip
LM555QML Timer General Description The LM555 is a highly stable device for generating accurate time delays or oscillation. Additional terminals are provided for triggering or resetting if desired. In the
More informationHCF4538B DUAL MONOSTABLE MULTIVIBRATOR
DUAL MONOSTABLE MULTIIBRATOR RETRIGGERABLE/RESETTABLE CAPABILITY TRIGGER AND RESET PROPAGATION DELAYS INDEPENDENT OF R X, C X TRIGGERING FROM LEADING OR TRAILING EDGE Q AND Q BUFFERED OUTPUT AAILABLE SEPARATE
More informationNJM2102 SYSTEM RESET IC
SYSTEM RESET IC GENERAL DESCRIPTION The NJM2102 Possesses two functions. One is to detect a voltage which decays from the desired voltage and generate a warning signal. And also, the NJM2102 holds the
More informationDistributed by: www.jameco.com 1-800-831-4242 The content and copyrights of the attached material are the property of its owner. LM555 Timer General Description The LM555 is a highly stable device for
More informationMultivibrators. Department of Electrical & Electronics Engineering, Amrita School of Engineering
Multivibrators Multivibrators Multivibrator is an electronic circuit that generates square, rectangular, pulse waveforms. Also called as nonlinear oscillators or function generators. Multivibrator is basically
More information..LOW TURN OFF TIME NE555 SA555 - SE555 GENERAL PURPOSE SINGLE BIPOLAR TIMERS. MAXIMUM OPERATING FREQUENCY GREATER THAN 500kHz
NE SA - SE GENERAL PURPOSE SINGLE BIPOLAR TIMERS..LOW TURN OFF TIME MAXIMUM OPERATING FREQUENCY GREATER THAN 00kHz. TIMING FROM MICROSECONDS TO HOURS. OPERATES IN BOTH ASTABLE AND MONOSTABLE MODES HIGH
More informationBA225 / BA225F / BA235 / BA226 / BA226F / BA236
timer he BA5, BA5F, BA5, BA6, BA6F, and BA6 are monolithic ICs having independent monostable multivibrator circuits which consume very low current (.75mA typ.). Using external resistors and capacitors,
More informationNE556, SA556, SE556 DUAL PRECISION TIMERS
DUAL PECISION TIMES Two Precision Timing Circuits per Package Astable or Monostable Operation TTL-Compatible Output Can Sink or Source Up to 150 ma Active Pullup or Pulldown Designed to be Interchangeable
More informationNJM4151 V-F / F-V CONVERTOR
V-F / F-V CONVERTOR GENERAL DESCRIPTION PACKAGE OUTLINE The NJM4151 provide a simple low-cost method of A/D conversion. They have all the inherent advantages of the voltage-to-frequency conversion technique.
More informationMOS INTEGRATED CIRCUIT Bipolar Analog Integrated Circuit
DATA SHEET MOS INTEGRATED CIRCUIT Bipolar Analog Integrated Circuit µpc TIMER CIRCUIT The µpc is a powerful integrated circuit. Adding a few external parts to it can turn it into various types of timing
More information. VERY LOW POWER CONSUMPTION :.WIDE SINGLE SUPPLY RANGE : . PIN-TO-PIN AND FUNCTIONALLY COMPAT- . OUTPUT COMPATIBLE WITH TTL,CMOS TS3V555
TS3555 3 LOW POWE SINGLE TIMES. DEDICATED TO 3.3 O BATTEY SUPPLY (Specified at 3 and 5). EY LOW POWE CONSUMPTION : 90µA at CC =3.WIDE SINGLE SUPPLY ANGE : +2.7 to +16. HIGH OUTPUT CUENT CAPABILITY. SUPPLY
More informationPRESENTATION ON 555 TIMER A Practical Approach
PRESENTATION ON 555 TIMER A Practical Approach By Nagaraj Vannal Assistant Professor School of Electronics Engineering, K.L.E Technological University, Hubballi-31 nagaraj_vannal@bvb.edu 555 Timer The
More informationNE556, SA556, SE556, SE556C DUAL PRECISION TIMERS
Two Precision Timing Circuits per Package Astable or Monostable Operation TTL-Compatible Output Can Sink or Source Up to 50 ma Active Pullup or Pulldown Designed to be Interchangeable With Signetics SE556,
More informationASTABLE MULTIVIBRATOR
555 TIMER ASTABLE MULTIIBRATOR MONOSTABLE MULTIIBRATOR 555 TIMER PHYSICS (LAB MANUAL) PHYSICS (LAB MANUAL) 555 TIMER Introduction The 555 timer is an integrated circuit (chip) implementing a variety of
More informationCD4538 Dual Precision Monostable
CD4538 Dual Precision Monostable General Description The CD4538BC is a dual, precision monostable multivibrator with independent trigger and reset controls. The device is retriggerable and resettable,
More informationTL494M PULSE-WIDTH-MODULATION CONTROL CIRCUIT
Complete PWM Power Control Circuitry Uncommitted Outputs for 00-mA Sink or Source Current Output Control Selects Single-Ended or Push-Pull Operation Internal Circuitry Prohibits Double Pulse at Either
More informationTL494 Pulse - Width- Modulation Control Circuits
FEATURES Complete PWM Power Control Circuitry Uncommitted Outputs for 200 ma Sink or Source Current Output Control Selects Single-Ended or Push-Pull Operation Internal Circuitry Prohibits Double Pulse
More informationLINEAR INTEGRATED CIRCUIT
VOLTAGE MODE PWM CONTROL CIRCUIT DESCRIPTION The incorporates all the functions required in the construction of a pulse-width modulation switching circuit. Designed primarily for switching power supply
More informationCMT-555 DATASHEET Revision: Aug-18 (Modified) HIGH TEMPERATURE RANGE 555 TIMER
The Leader in High Temperature Semiconductor Solutions Revision: 1.7 8-Aug-18 HIGH TEMPERATURE RANGE 555 TIMER General Description The CMT-555 is an extended temperature range, low-power, highly stable
More informationMC1455, MC1455B, NCV1455B. Timers
M, MB, NVB Timers The M monolithic timing circuit is a highly stable controller capable of producing accurate time delays or oscillation. Additional terminals are provided for triggering or resetting if
More informationSingle Channel Linear Controller
Single Channel Linear Controller Description The is a low dropout linear voltage regulator controller with IC supply power (VCC) under voltage lockout protection, external power N-MOSFET drain voltage
More informationNE555,SA555,SE555 PRECISION TIMERS
Timing From Microseconds to Hours Astable or Monostable Operation Adjustable Duty Cycle TTL-Compatible Output Can Sink or Source Up To 200 ma Description/ordering information These devices are precision
More informationCHAPTER 4: 555 TIMER. Dr. Wan Mahani Hafizah binti Wan Mahmud
CHAPTE 4: 555 TIME Dr. Wan Mahani Hafizah binti Wan Mahmud 555 TIME Introduction Pin configuration Basic architecture and operation Astable Operation Monostable Operation Timer in Triggering Circuits 555
More informationFeatures MIC1555 VS MIC1557 VS OUT 5
MIC555/557 MIC555/557 IttyBitty RC Timer / Oscillator General Description The MIC555 IttyBitty CMOS RC timer/oscillator and MIC557 IttyBitty CMOS RC oscillator are designed to provide rail-to-rail pulses
More informationLM231A/LM231/LM331A/LM331 Precision Voltage-to-Frequency Converters
LM231A/LM231/LM331A/LM331 Precision Voltage-to-Frequency Converters General Description The LM231/LM331 family of voltage-to-frequency converters are ideally suited for use in simple low-cost circuits
More informationDEPARTMENT OF ELECTRICAL ENGINEERING LAB WORK EE301 ELECTRONIC CIRCUITS
DEPARTMENT OF ELECTRICAL ENGINEERING LAB WORK EE301 ELECTRONIC CIRCUITS EXPERIMENT : 4 TITLE : 555 TIMERS OUTCOME : Upon completion of this unit, the student should be able to: 1. gain experience with
More informationCHT-555 DATASHEET Revision: 1.10 Feb. 12, 2016
The Leader in High Temperature Semiconductor Solutions Revision: 1.10 Feb. 12, 2016 HIGH TEMPERATURE 555 TIMER General Description The CHT-555 is a high-temperature, lowpower, highly stable device for
More informationML4818 Phase Modulation/Soft Switching Controller
Phase Modulation/Soft Switching Controller www.fairchildsemi.com Features Full bridge phase modulation zero voltage switching circuit with programmable ZV transition times Constant frequency operation
More informationLM2240 Programmable Timer Counter
LM2240 Programmable Timer Counter General Description The LM2240 Programmable Timer Counter is a monolithic controller capable of both monostable and astable operation Monostable operation allows accurate
More informationUNISONIC TECHNOLOGIES CO., LTD
UNISONIC TECHNOLOGIES CO., LTD VOLTAGE MODE PWM CONTROL CIRCUIT DESCRIPTION The UTC TL494 incorporates all the functions required in the construction of a pulse-width modulation switching circuit. Designed
More informationNE555, NE555Y, SA555, SE555, SE555C PRECISION TIMERS
NE, NEY, SA, SE, SEC SLFS0 D9, SEPTEMBE 9 EISED FEBUAY 99 Timing From Microseconds to Hours Astable or Monostable Operation Adjustable Duty Cycle TTL-Compatible Output Can Sink or Source up to 00 ma Functionally
More informationDual Bias Resistor Transistors
DATA SHEET SEMICONDUCTOR MUN5DW Series Dual Bias Resistor Transistors PNP Silicon Surface Mount Transistors with Monolithic Bias Resistor Network The BRT (Bias Resistor Transistor) contains a single transistor
More informationPHYS225 Lecture 18. Electronic Circuits
PHYS225 Lecture 18 Electronic Circuits Oscillators and Timers Oscillators & Timers Produce timing signals to initiate measurement Periodic or single pulse Periodic output at known (controlled) frequency
More informationDistributed by: www.jameco.com 1-800-831-4242 The content and copyrights of the attached material are the property of its owner. LMC555 CMOS Timer General Description The LMC555 is a CMOS version of the
More information7X = Device Marking. Symbol
The BRT (Bias Resistor Transistor) contains a single transistor with a monolithic bias network consisting of two resistors; a series base resistor and a baseemitter resistor. These digital transistors
More informationObsolete Product(s) - Obsolete Product(s)
DUAL MONOSTABLE MULTIVIBRATOR RETRIGGERABLE/RESETTABLE CAPABILITY TRIGGER AND RESET PROPAGATION DELAYS INDEPENDENT OF R X, C X TRIGGERING FROM LEADING OR TRAILING EDGE Q AND Q BUFFERED OUTPUT AVAILABLE
More informationHCF4538B DUAL MONOSTABLE MULTIVIBRATOR
DUAL MONOSTABLE MULTIVIBRATOR RETRIGGERABLE/RESETTABLE CAPABILITY TRIGGER AND RESET PROPAGATION DELAYS INDEPENDENT OF R X, C X TRIGGERING FROM LEADING OR TRAILING EDGE Q AND Q BUFFERED OUTPUT AVAILABLE
More informationNE555, NE555Y, SA555, SE555, SE555C PRECISION TIMERS
Timing From Microseconds to Hours Astable or Monostable Operation Adjustable Duty Cycle TTL-Compatible Output Can Sink or Source up to 00 ma Functionally Interchangeable With the Signetics NE, SA, SE,
More informationDistributed by: www.jameco.com 1-800-831-4242 The content and copyrights of the attached material are the property of its owner. LM231A/LM231/LM331A/LM331 Precision Voltage-to-Frequency Converters General
More informationUNISONIC TECHNOLOGIES CO., LTD UA8316 Preliminary LINEAR INTEGRATED CIRCUIT
UNISONIC TECHNOLOGIES CO., LTD UA8316 Preliminary LINEAR INTEGRATED CIRCUIT IGBT GATE DRIVER DESCRIPTION Integrating IGBT gate drive circuits on a single chip, The UTC UA8316 is a dedicated IC and a high
More information555 Timer and Its Application
ANALOG ELECTRONICS (AE) 555 Timer and Its Application 1 Prepared by: BE-EE Amish J. Tankariya SEMESTER-III SUBJECT- ANALOG ELECTRONICS (AE) GTU Subject Code :- 210902 2 OBJECTIVES 555 timer; What is the
More informationSingle 0.275% Comparator and Reference with Dual Polarity Outputs ADCMP361
Data Sheet FEATURES mv ±.275% threshold Supply range:.7 V to 5.5 V Low quiescent current: 6.5 µa typical Input range includes ground Internal hysteresis: 9.3 mv typical Low input bias current: ±5 na maximum
More informationS-8423 Series. Rev.2.0 BATTERY BACKUP IC
Rev.2. BATTERY BACKUP IC The is a CMOS IC designed for use in the switching circuits of main and backup power supplies of 3- or 5- operation microcomputers. It consists of two voltage regulators, three
More informationCD4538BC Dual Precision Monostable
CD4538BC Dual Precision Monostable General Description The CD4538BC is a dual, precision monostable multivibrator with independent trigger and reset controls. The device is retriggerable and resettable,
More informationTo design/build monostable multivibrators using 555 IC and verify their operation using measurements by observing waveforms.
AIM: SUBJECT: ANALOG ELECTRONICS (2130902) EXPERIMENT NO. 09 DATE : TITLE: TO DESIGN/BUILD MONOSTABLE MULTIVIBRATORS USING 555 IC AND VERIFY THEIR OPERATION USING MEASUREMENTS BY OBSERVING WAVEFORMS. DOC.
More informationPulse-Width-Modulation Control Circuits
FEATURES Complete PWM Power Control Circuitry Uncommitted Outputs for 2 Ma Sink or Source Current Output Control Selects SingleEnded or PushPull Operation Error AMP 1 NONIN INPUT IN INPUT SOP16/DIP16 (TOP
More informationTL494 PULSE-WIDTH-MODULATION CONTROL CIRCUITS
Complete PWM Power-Control Circuitry Uncommitted Outputs for 200-mA Sink or Source Current Output Control Selects Single-Ended or Push-Pull Operation Internal Circuitry Prohibits Double Pulse at Either
More informationLMC555 CMOS Timer. Features. Block and Connection Diagrams. Pulse Width Modulator. October 2003
LMC555 CMOS Timer General Description The LMC555 is a CMOS version of the industry standard 555 series general purpose timers. In addition to the standard package (SOIC, MSOP, and MDIP) the LMC555 is also
More informationLTV-063L LVTTL/LVCMOS Compatible 3.3V Dual-Channel Optocouplers (10 Mb/s)
LTV-063L LVTTL/LVCMOS Compatible 3.3V Dual-Channel Optocouplers (10 Mb/s) Description The LTV-063L consists of a high efficient AlGaAs Light Emitting Diode and a high speed optical detector. This design
More informationPRODUCTION DATA SHEET
The MC34064 is an undervoltage sensing circuit designed specifically for use as a reset controller in microprocessor- based systems. It offers the designer an economical, space-efficient solution for low
More information36 V Input Voltage Detector with Delay Function for Automotive Applications
Series AEC-Q100 Compliant 36 V Input Voltage Detector with Delay Function for Automotive Applications OUTLINE The R3119N is a CMOS-based 36V input (absolute maximum ratings: 50V) voltage detector (VD)
More informationTL598 PULSE-WIDTH-MODULATION CONTROL CIRCUITS
Complete PWM Power Control Function Totem-Pole Outputs for 200-mA Sink or Source Current Output Control Selects Parallel or Push-Pull Operation Internal Circuitry Prohibits Double Pulse at Either Output
More informationTL594 PULSE-WIDTH-MODULATION CONTROL CIRCUITS
Complete PWM Power Control Circuitry Uncommitted Outputs for 200-mA Sink or Source Current Output Control Selects Single-Ended or Push-Pull Operation Internal Circuitry Prohibits Double Pulse at Either
More informationM74HC423TTR DUAL RETRIGGERABLE MONOSTABLE MULTIVIBRATOR
DUAL RETRIGGERABLE MONOSTABLE MULTIVIBRATOR HIGH SPEED : t PD = 22 (TYP.) at V CC = 6V LOW POWER DISSIPATION: STAND BY STATE : I CC =4µA (MAX.) at T A =25 C ACTIVE STATE : I CC =700µA (TYP.) at V CC =
More informationNJM2355 TWO OUTPUT HIGH VOLTAGE SWITCHING REGULATOR
TWO OUTPUT HIGH VOLTAGE SWITCHING REGULATOR NJM2355 GENERAL DESCRIPTION New JRC's high voltage switching regulator, NJM2355, is a monolithic high voltage (50V max) operation integrated circuit consisting
More informationCMT-555 DATASHEET Revision: Dec-13 (Modified) HIGH TEMPERATURE RANGE 555 TIMER
The Leader in High Temperature Semiconductor Solutions Revision: 1.4 9-Dec-1 HIGH TEMPERATURE RANGE 555 TIMER General Description The CMT-555 is an extended temperature range, low-power, highly stable
More informationPulse-Width-Modulation Control Circuits
Pulse-Width-Modulation Control Circuits Product Description The series incorporate on single monolithic chip all the functions required in the construction of a pulse-width-modulation control circuit.
More information). The THRESHOLD works in exactly the opposite way; whenever the THRESHOLD input is above 2/3V CC
ENGR 210 Lab 8 RC Oscillators and Measurements Purpose: In the previous lab you measured the exponential response of RC circuits. Typically, the exponential time response of a circuit becomes important
More informationCYD8945 High Reliability Hall Effect Switch IC
CYD8945 High Reliability Hall Effect Switch IC The CYD8945 Hall-Effect switch, produced with ultra-high voltage bipolar technology, has been designed specifically for automotive and industrial applications
More informationHA17555 Series. Precision Timer
Precision Timer ADE-204-064 (Z) Rev. 0 Dec. 2000 Description HA17555 Series are ICs designed for accurate time delays or oscillations. It provides both of trigger terminal and reset terminal in order to
More informationReset IC with battery backup function
Reset IC with battery backup function BAAF / BA / BAF The BAAF, BA, and BAF are reset ICs with a battery backup function, designed for equipment using SRAMs and other similar components. These ICs are
More informationADT7350. General Description. Applications. Features. Typical Application Circuit. Aug / Rev. 0.
General Description The ADT7350 is a step-down converter with integrated switching MOSFET. It operates wide input supply voltage range from 4.5V to 24V with 1.2A peak output current. It includes current
More informationADM6823. Low Voltage, Supervisory Circuit with Watchdog and Manual Reset in 5-Lead SOT-23. Data Sheet FUNCTIONAL BLOCK DIAGRAM FEATURES APPLICATIONS
Data Sheet Low Voltage, Supervisory Circuit with Watchdog and Manual Reset in 5-Lead SOT-23 FEATURES Precision low voltage monitoring 9 reset threshold options: 1.58 V to 4.63 V (typical) 140 ms (minimum)
More informationTL494C, TL494I, TL494M, TL494Y PULSE-WIDTH-MODULATION CONTROL CIRCUITS
Complete PWM Power Control Circuitry Uncommitted Outputs for 00-mA Sink or Source Current Output Control Selects Single-Ended or Push-Pull Operation Internal Circuitry Prohibits Double Pulse at Either
More informationTL594C, TL594I, TL594Y PULSE-WIDTH-MODULATION CONTROL CIRCUITS
Complete PWM Power Control Circuitry Uncommitted Outputs for 200-mA Sink or Source Current Output Control Selects Single-Ended or Push-Pull Operation Internal Circuitry Prohibits Double Pulse at Either
More informationMicroprocessor Reset Circuit
Microprocessor Reset Circuit GENERAL DESCRIPTION The TS3809 series are used for microprocessor (µp) supervisory circuits to monitor the power supplies in µp and digital systems. They provide excellent
More informationExperiment EB2: IC Multivibrator Circuits
EEE1026 Electronics II: Experiment Instruction Learning Outcomes Experiment EB2: IC Multivibrator Circuits LO1: Explain the principles and operation of amplifiers and switching circuits LO2: Analyze high
More informationLIC & COMMUNICATION LAB MANUAL
LIC & Communication Lab Manual LIC & COMMUNICATION LAB MANUAL FOR V SEMESTER B.E (E& ( E&C) (For private circulation only) NAME: DEPARTMENT OF ELECTRONICS & COMMUNICATION SRI SIDDHARTHA INSTITUTE OF TECHNOLOGY
More informationRT8457A. Isolated Secondary-Side LED Lighting Dimmable Current Controller. Features. General Description. Applications. Marking Information
RT8457A Isolated Secondary-Side LED Lighting Dimmable Current Controller General Description The RT8457A is an isolated secondary LED current controller designed specifically for lighting fixtures such
More informationOperating Manual Ver.1.1
SCR Triggering Techniques ST2703 Operating Manual Ver.1.1 An ISO 9001 : 2000 company 94-101, Electronic Complex Pardesipura, Indore- 452010, India Tel : 91-731- 2570301/02, 4211100 Fax: 91-731- 2555643
More informationUNISONIC TECHNOLOGIES CO., LTD M54133A Preliminary LINEAR INTEGRATED CIRCUIT
UNISONIC TECHNOLOGIES CO., LTD M54133A Preliminary LINEAR INTEGRATED CIRCUIT EARTH LEAKAGE CURRENT DETECTOR DESCRIPTION The UTC M54133A is a semiconductor integrated circuit developed for use in high-speed
More informationTA8435H/HQ TA8435H/HQ PWM CHOPPER-TYPE BIPOLAR STEPPING MOTOR DRIVER. FEATURES TOSHIBA BIPOLAR LINEAR INTEGRATED CIRCUIT SILICON MONOLITHIC
TOSHIBA BIPOLAR LINEAR INTEGRATED CIRCUIT SILICON MONOLITHIC TA8435H/HQ TA8435H/HQ PWM CHOPPER-TYPE BIPOLAR STEPPING MOTOR DRIVER. The TA8435H/HQ is a PWM chopper-type sinusoidal micro-step bipolar stepping
More informationSingle Comparator with Known Power-Up State ADCMP391
FEATURES Single-supply voltage operation:.3 to 5.5 Rail-to-rail common-mode input voltage range Low input offset voltage across CMR: 1 m typical Guarantees comparator output logic low from CC 0.9 to undervoltage
More informationS-8130AA Series TEMPERATURE SWITCH IC WITH LATCH. Rev.2.2_00
Rev.2.2_00 TEMPERATURE SWITCH IC WITH LATCH Features Detection temperature : +60 to +95 C, 5 C step Detection accuracy : ±2.5 C V SS grounded temperature voltage output Low voltage operation : V DD (min.)=2.2
More informationLinear Integrated Circuits
Linear Integrated Circuits Single Slope ADC Comparator checks input voltage with integrated reference voltage, V REF At the same time the number of clock cycles is being counted. When the integrator output
More informationDescription. Eco Status. KA7500C 16-Lead Dual Inline Package (DIP) Tube. -25 to +85 C RoHS 16-Lead Small Outline Package (SOP)
KA7500C SMPS Controller Features Internal Regulator Provides a Stable 5V Reference Supply Trimmed to ±1% Accuracy Uncommitted Output TR for 200mA Sink or Source Current Output Control for Push-Pull or
More informationPD7500 Pulse-Width-Modulation Control Circuits
PD7500 Pulse-Width-Modulation Control Circuits Description The PD7500 is a voltage mode pulse width modulation switching regulator control circuit designed primarily for power supply control. The PD7500
More information