LD7752B 6/11/2013. Green-Mode PWM Controller with HV Start-Up Circuit and Soft Start time Adjustment. Features. General Description.
|
|
- Cleopatra Carr
- 6 years ago
- Views:
Transcription
1 6/11/2013 Green-Mode PWM Controller with HV Start-Up Circuit and Soft Start time Adjustment REV. 00 General Description The brings high performance, highly integrated functions, protections and EMI-improve solution. It s an ideal solution for those cost-sensitive system, reducing component count and overall system cost. The features high voltage startup circuit, minimum loss and green-mode power-saving operation, leading-edge blanking of the current sensing and internal slope compensation. They also consist of more protections of OLP (Over Load Protection) and OVP (Over Voltage Protection) to prevent the circuit from damage under abnormal conditions. Furthermore, the proprietary frequency swapping function can reduce the noise and help the power circuit designers to enhance EMI performance with fewer components and less developing time. Features High-Voltage Startup Circuit UVLO (Under Voltage Lockout) LEB (Leading-Edge Blanking) on Pin Internal Frequency swapping Internal Slope Compensation Internal OCP Compensation OVP (Over Voltage Protection) on Vcc Pin OLP (Over Load Protection) +250mA/-500mA Driving Capability Soft-Driving Soft Start Time and Grouping Frequency Adjustment Applications LCD Monitor/TV Power Switching AC/DC Adaptor and Battery Charger Open Frame Switching Power Supply Typical Application AC input EMI Filter HV CT * COMP photocoupler -DS-00 June
2 CT COMP CT COMP HV HV NC Pin Configuration SOP-7 (TOP VIEW) SOP-8 (TOP VIEW) TOP MARK YYWWPP TOP MARK YYWWPP YY: WW: PP: Year code Week code Production code Ordering Information Part number Switching Freq. Package Top Mark Shipping GS 100kHz SOP-8 GS 2500 /tape & reel GR 100kHz SOP-7 GR 2500 /tape & reel The is ROHS compliant/ Green Packaged. Pin Descriptions PIN NAME FUNCTION 1 CT Soft start time adjustment. 2 COMP Voltage feedback pin (same as the COMP pin in UC384X). Connect a photo-coupler to close the control loop and achieve regulation. 3 Current sense pin, connect it to sense the MOSFET current 4 Ground 5 Gate drive output to drive the external MOSFET 6 Supply voltage pin 7 NC Unconnected Pin 8 HV Connect this pin with positive terminal of bulk capacitor to provide startup current for the controller. As Vcc voltage trips to UVLO (on), this HV loop will be disabled to minimize power loss through the startup circuit. -DS-00 June
3 Block Diagram HV 1mA 16.0V/ 8.0V UVLO Comparator internal bias & Vref All Blocks OVP Comparator PG OK Vref OK OVP OTP 28.0V OSC S R Q Protection Latch Protection OLP Soft-Driving DSCP Green-Mode Control CT Soft start timing Control Vbias COMP 2VF Leading Edge Blanking 2R R 0.85V/ 0.65V PWM Comparator + Slope Compensation + OCP Comparator S R Q PDR OLP Delay Counter S Q OLP 4.5V OLP Comparator PG ½ Counter R -DS-00 June
4 Absolute Maximum Ratings Supply Voltage -0.3V~30V High-Voltage Pin, HV -0.3V~500V COMP, OTP, -0.3 ~6V -0.3 ~+0.3V Maximum Junction Temperature 150 C Operating Junction Temperature Range -40 C to 125 C Operating Ambient Temperature -40 C to 85 C Storage Temperature Range -65 C to 150 C Package Thermal Resistance (SOP-8/ SOP-7, JA) 160 C/W Power Dissipation, PD@85 C (SOP-8/ SOP-7) 250mW Lead temperature (Soldering, 10sec) 260 C ESD Voltage Protection, Human Body Model (except HV Pin) 2.5KV ESD Voltage Protection, Machine Model (except HV Pin) 250V ESD Voltage Protection, Human Body Model (HV Pin) 1KV ESD Voltage Protection, Machine Model (HV pin) 250V Gate Output Current 250mA/-500mA Caution: Stress exceeding Maximum Ratings may damage the device. Maximum Ratings are stress ratings only. Functional operation above the Recommended Operating Conditions is not implied. Extended exposure to stress above Recommended Operating Conditions may affect device reliability. Recommended Operating Conditions Supply Voltage Vcc 9.5V to 26V Capacitor 10 to 47µF COMP Capacitor Value 1~100nF CT Capacitor Value 22~330nF -DS-00 June
5 Electrical Characteristics (T A = +25 C unless otherwise stated, V CC =15.0V) PARAMETER CONDITIONS MIN TYP MAX UNITS High-Voltage Supply (HV Pin, HV MOS process) High-Voltage Current Source V CC < UVLO(on) ma Off-State Leakage Current V CC > UVLO(off), HV=500V 15 A Supply Voltage ( Pin) Startup Current V CC=15V, HV=500V A V COMP =0V 0.55 ma Operating Current V COMP =3V 2.0 ma (with 1nF load on pin) OLP tripped 230 A OVP tripped, =OVP 230 A UVLO (OFF) V UVLO (ON) V OVP Level V Voltage Feedback (COMP Pin) Short Circuit Current V COMP =0V ma Open Loop Voltage COMP pin open V Fixed Frequency Mode Threshold VCOMP ( ) 2.5 V Green Mode Threshold VCOMP ( ) 25kHz 2.1 V Burst Mode Threshold VCOMP 1.60 V Current Sensing ( Pin) V -OFF V V -MIN V Leading Edge Blanking Time 250 ns Delay to Output 100 ns Oscillator for Switching Frequency Frequency khz Temp. Stability ( ) 5 % Voltage Stability ( ) (V CC =11V-25V) 1 % Green Mode Frequency 100kHz 25 khz Frequency Swapping 100kHz 6.0 khz Maximum Duty 75 % -DS-00 June
6 PARAMETER CONDITIONS MIN TYP MAX UNITS Gate Drive Output ( Pin) Output Low Level V CC =15V, Io=20mA 1 V Output High Level V CC =15V, Io=20mA 9 V Rising Time ( ) Falling Time ( ) OLP (Over Load Protection) Load Capacitance=1000pF ns Load Capacitance=1000pF ns OLP Trip Level V OLP Delay Time 84 ms Soft start (CT Pin) Soft Start duration CT pin = F 3.8 ms On Chip OTP (Over Temperature) OTP Level ( ) OTP Hysteresis ( ) Notes: Guaranteed by design. 140 C 30 C -DS-00 June
7 OVP(V) OVP-Trip Current(mA) Startup Current(uA) Operating Current(mA) UVLO(on)(V) UVLO(off)(V) Typical Performance Characteristics Fig. 1 UVLO(on) vs. Temperature 6 Fig. 2 UVLO(off) vs. Temperature Fig. 3 Startup Current Ivcc vs.temperature Fig. 4 Operating Current v.s.temperature Fig. 5 OVP vs.temperature 0.2 Fig. 6 OVP-Trip Current vs.temperature -DS-00 June
8 Frequency(kHz) Frequency(kHz) OLP(V) T OLP (ms) Fig. 7 OLP-Trip Level vs.temperature 70 Fig. 8 OLP Delay Time vs.temperature Fig. 9 Frequency vs.temperature 10 Fig. 10 Green Mode Frequency vs.temperature -DS-00 June
9 Application Information Operation Overview The meets the green-power requirement and is intended for the use in those modern switching power suppliers and adaptors which demand higher power efficiency and power-saving. It integrates more functions to reduce the external components counts and the size. Its major features are described as below. Internal High-Voltage Startup Circuit and Under Voltage Lockout (UVLO) Vin Cbulk D1 R1 C1 such configuration, it spends almost same time for turn-on delay either under low-line or high-line conditions. As trips UVLO(ON), HV pin would no longer charge the capacitor and instead, send a gate drive signal to draw supply current for from the auxiliary winding of the transformer. That minimizes the power loss on the start-up circuit successfully. An UVLO comparator is embedded to detect the voltage across the Vcc pin to monitor if the supply voltage is enough to power on the and in addition to drive the power MOSFET. As shown in Fig. 8, a hysteresis is provided to prevent the shutdown from the voltage dip during startup. The turn-on and turn-off threshold level are set at 16V and 8V, respectively. HV Vcc UVLO(on) COMP Rs UVLO(off) Fig. 7 The traditional circuit provides the startup current through a startup resistor to power up the PWM controller. However, it consumes significant power. In most cases, startup resistors carry large resistance. And larger resistance spends more time to startup. To achieve optimized topology, as shown in Fig. 7, is designed with high-voltage startup circuit for it. At startup transient, the high-voltage current source sinks through the bulk capacitor to provide the startup current to charge the Vcc capacitor C1. During initialization, the Vcc drops below UVLO threshold to enable the current source to supply 1mA current. Since there s only 150 A required for startup, most of the HV current is reserved to charge the Vcc capacitor. With HV Current 1mA Vcc current Startup Current ~ 0mA (off) Operating Current (Supply from Auxiliary Winding) Fig. 8 Current Sensing, Leading-Edge Blanking and the Negative Spike on Pin The typical current mode PWM controller feedbacks both current signal and voltage signal to close the t t -DS-00 June
10 control loop and achieve regulation. The detects the primary MOSFET current over pin for the peak current mode control and also for the pulse-by-pulse current limit. The maximum voltage threshold of the current sensing pin is set at 0.85V. Thus the MOSFET peak current is calculated as: 0.85V IPEAK(MAX) RS A 250nS leading-edge blanking (LEB) time is programed in the input of pin to prevent false-triggering from the current spike. For most low power applications, the R-C filter (as shown in Fig.9) is eliminable if the total pulse width of the turn-on spikes is less than 250nS and the negative spike on the pin does not exceed -0.3V. However, the total pulse width of the turn-on spike is subject to the output power, circuit design and PCB layout. It is strongly recommended to add a small R-C filter (as shown in Fig. 10) for larger power applications to avoid the pin from being damaged by the negative turn-on spike. Removable if the negative spike is not over spec. (-0.3V). Fig ns blanking time Output Stage and Maximum Duty-Cycle An output stage of a CMOS buffer with typical 250mA source and 500mA sink driving capability is incorporated to drive a power MOSFET directly. And the maximum duty-cycle of is limited to 75% to avoid the transformer saturation. Voltage Feedback Loop The voltage feedback signal is delivered from the TL431 on the secondary side through the photo-coupler to the COMP pin. The input stage of, as UC384X, consists of 2 diodes voltage offset to feed the voltage divider with 1/3 ratio, that is, 1 V (PWM COMPARATOR ) (VCOMP 2VF ) 3 A pull-high resistor is embedded internally to optimize the external circuit. An R-C filter is required once if the negative spike is over -0.3V or the total spike width over 250nS LEB period. Fig. 10 Oscillator and Switching Frequency The switching frequency of is fixed at 100kHz internally to optimize the operation in consideration of the EMI performance, thermal treatment, component sizes and transformer design. -DS-00 June
11 Adjustable Grouping Frequency and Soft Start on CT Pin In order to prevent the acoustic noise from grouping frequency Fg, adjust the external capacitance of CT pin and the soft start time for it according to the below table. The grouping frequency is limited from 600Hz to 1.80KHz C CT (nf) Grouping frequency Fg (KHz) Soft start time Tss (ms) 22nF 1.2~ nF 0.8~ nF 0.6~ Internal Slope Compensation A fundamental issue of current mode control is the stability problem when its duty-cycle is operated for more than 50%. To stabilize the control loop, slope compensation is required in the traditional UC384X design by injecting the ramp signal from the RT/CT pin through a coupling capacitor. Well, requires none of it since there s a built-in slope compensation circuit to simplify the external circuit design. On/Off Control Pulling COMP pin below 1.6V will disable the gate output pin of immediately. The off mode will be released soon as the pull-low signal is removed. Dual-Oscillator Green-Mode Operation There are various topologies for chips to meet green-mode or power saving requirements, such as burst-mode control, skipping-cycle mode, variable off-time control etc. The basic operation theory of all these approaches intends to reduce the switching cycles under light-load or no-load condition either by skipping some switching pulses or reduce the switching frequency. With LD proprietary dual-oscillator technique, the green-mode frequency can be well controlled and further to avoid the generation of audible noise. Over Load Protection (OLP) - Auto Recovery To protect the circuit from being damaged in over-load, short or open loop condition, the is implemented with smart OLP function. It also features auto recovery function; see Fig. 11 for the waveform. If in fault condition, the feedback system will force the voltage loop enter toward the saturation and then pull the voltage high over COMP pin (V COMP). When the V COMP ramps up over OLP threshold of 4.5V and stays for more than OLP delay time, the protection will be activated and then turn off the gate output to stop the switching of power circuit. A divide-2 counter is implemented to reduce the average power under OLP behavior. As soon as OLP is activated, the output will be latched off and the divide-2 counter starts to count the numbers of UVLO(off). The latch will be released when the 2nd UVLO(off) point is tripped, then the output will recover to switch again. With the protection mechanism, it minimizes the average input power to control the component s temperature and stress within the safe operating area. UVLO(on) UVLO(off) 4.5V COMP Switching OLP 2nd UVLO(off) OLP Counter Reset OLP Delay Time Non-Switching Fig. 11 OLP trip Level Switching t t t -DS-00 June
12 OVP (Over Voltage Protection) on Vcc - Auto Recovery The maximum V GS ratings of the power MOSFETs are mostly set at 30V. To prevent the V GS from damage in fault condition, is embedded with OVP function on Vcc. Once the Vcc voltage rises above OVP threshold, it shuts down output gate drive circuit simultaneously and disable the switching of the power MOSFET until the next UVLO(on) is reached. The possess auto-recoverable Vcc OVP functions. The OVP condition usually comes with open-loop of feedback. Before it s released, the Vcc will trip to OVP level and shutdown the output again. The Vcc works in hiccup mode. Fig. 12 shows its operation. Otherwise, soon as the OVP condition is removed, the Vcc level will be resumed and the output will automatically return to the normal operation. OVP Tripped OVP Level from being false-triggered by the current through the gate-to-drain capacitor C GD. Therefore, the MOSFET is always pulled low and placed in the off-state either as the gate resistor is disconnected or opened. It is recommended to add an resistor on the power circuit. Rg R8 An internal pull-low resistor is built in here to prevent from floating. Fig. 13 UVLO(on) UVLO(off) V bulk t dv i Cgd bulk dt Switching Non-Switching Switching Cgd t Fig. 12 Pull-Low Resistor on the Gate Pin of MOSFET The consists of an anti-floating resistor on the pin to protect the output from abnormally operation or false triggering of MOSFET. Even so, we still recommend adding an external one at the MOSFET gate terminal to provide more protection in case of disconnection of gate resistor R G during power-on. Rg R8 This resistor is to prevent the MOSFET from false triggering by the current through Cgd in case Rg is disconnected. Fig. 14 In single-fault condition, as shown in Fig. 13, the resistor R8 can provide a discharge path to avoid the MOSFET 12 -DS-00 June 2013
13 Protection Resistor on the Hi-V Path In some other Hi-V process and design, there may be a parasitic SCR caused around HV pin, Vcc and. As shown in Fig. 15, any small negative spike on the HV pin may trigger this parasitic SCR and cause latch-up between Vcc and. It will damage the chip because of the equivalent short-circuit induced by the latch-up behavior. With Leadtrend s proprietary of Hi-V technology, the is free from parasitic SCR. Fig. 10 shows the equivalent circuit for it. The is stronger to sustain negative voltage than the other similar products. However, a 10K resistor is recommended to add on the Hi-V path to play as a current limit resistor whenever a negative voltage is applied. Negative-triggered Parasitic SCR. Any small negative spike on HV pin will cause latchup between Vcc and. 0V HV Other HV process with parasitic SCR 0V HV Frequency Swapping The current limit resistor here is to prevent damage from Negative voltage (recommended) LD7752 is free from parasitic effect between HV, Vcc and Fig. 16 The is built-in with programmable frequency swapping function. It enables the power supply designers to optimize EMI performance and system cost. The Frequency Swapping was internally set at 4KHz when incorporating with 100KHz switching frequency. On-Chip OTP Auto Recovery An internal OTP circuit is embedded to provide the worst-case protection for this controller. If the chip temperature rises over the trip OTP level, the output will be disabled until the chip is cooled down below the hysteresis window. Fig. 15 -DS-00 June
14 Reference Application Circuit W (5V/2A) Adapter L AC input N F1 R1A R1B NTC1 Z1 FL1 CX1 IC1 CT C3 D1A~D1D C1 8 6 COMP 1 HV R9 D2 C2 R7 R6 R51B R51A C51 L51 T1 R4A CR51 C4 C52 R4B ZD51 R56A R56B D4 Q1 R8 RS1 RS2 R54 R52 IC2 C5 photocoupler C55 CY1 R55 IC5 R53 C54 -DS-00 June
15 Package Information SOP-7 Symbols Dimensions in Millimeters Dimensions in Inch MIN MAX MIN MAX A B C D F H I J M θ DS-00 June
16 Package Information SOP-8 Symbols Dimensions in Millimeters Dimensions in Inch MIN MAX MIN MAX A B C D F H I J M θ DS-00 June
17 Revision History Rev. Date Change Notice 00 6/11/2013 Original Specification -DS-00 June
LD /14/2013. Green-Mode PWM Controller with HV Start-Up Circuit and Soft Start time Adjustment. Features. General Description.
06/14/2013 Green-Mode PWM Controller with HV Start-Up Circuit and Soft Start time Adjustment REV. 01 General Description The brings high performance, highly integrated functions, protections and EMI-improve
More informationLD7577 1/15/2009. High Voltage Green-Mode PWM Controller with Brown-Out Protection. General Description. Features. Applications. Typical Application
Rev. 01 General Description High Voltage Green-Mode PWM Controller with Brown-Out Protection The LD7577 integrates several functions of protections, and EMI-improved solution in SOP-8 package. It minimizes
More informationLD7523 6/16/2009. Smart Green-Mode PWM Controller with Multiple Protections. General Description. Features. Applications. Typical Application REV: 00
6/16/2009 Smart Green-Mode PWM Controller with Multiple Protections REV: 00 General Description The LD7523 is a low startup current, current mode PWM controller with green-mode power-saving operation.
More informationLD7536E 5/28/2012. Green-Mode PWM Controller with Frequency Swapping and Integrated Protections. General Description. Features.
5/28/2012 Green-Mode PWM Controller with Frequency Swapping and Integrated Protections Rev. 00 General Description The is built-in with several functions, protection and EMI-improved solution in a tiny
More informationLD7536R 05/11/2010. Green-Mode PWM Controller with Frequency Swapping and Integrated Protections. General Description. Features.
05/11/2010 Green-Mode PWM Controller with Frequency Swapping and Integrated Protections Rev. 00 General Description The LD7536R is built-in with several functions, protection and EMI-improved solution
More informationLD7750 2/23/2010. High Voltage Green-Mode PWM Controller with Over Temperature Protection. Features. Applications. Typical Application
Rev. 00b General Description High Voltage Green-Mode PWM Controller with Over Temperature Protection Features LD7750 2/23/2010 The LD7750 integrates several functions of protections, and EMI-improved solution
More informationLD7575 6/16/2008. Green-Mode PWM Controller with High-Voltage Start-Up Circuit. General Description. Features. Applications. Typical Application
Green-Mode PWM Controller with High-Voltage Start-Up Circuit LD7575 6/16/2008 REV: 04b General Description The LD7575 is a current-mode PWM controller with excellent power-saving operation. It features
More informationLD /15/2011. Green-Mode PWM Controller with Frequency Swapping and Integrated Protections. Features. General Description.
12/15/2011 Green-Mode PWM Controller with Frequency Swapping and Integrated Protections Rev. 02a General Description The LD7536 is built-in with several functions, protection and EMI-improved solution
More informationLD7552B 1/2/2008. Green-Mode PWM Controller with Integrated Protections. General Description. Features. Applications. Typical Application. Rev.
Rev. 01a LD7552B 1/2/2008 Green-Mode PWM Controller with Integrated Protections General Description The LD7552B are low cost, low startup current, current mode PWM controllers with green-mode power- saving
More informationLD7550-B. Green-Mode PWM Controller. General Description. Features. Applications. Typical Application 01/03/2005 LD7550-B
01/03/2005 Green-Mode PWM Controller General Description The LD7550-B is a low cost, low startup current, current mode PWM controller with green-mode power-saving operation. The integrated functions such
More informationLD7552. Green-Mode PWM Controller. Features. General Description. Applications. Typical Application 2/21/2005
2/21/2005 Green-Mode PWM Controller General Description The LD7552 is a low cost, low startup current, current mode PWM controller with green-mode power-saving operation. The integrated functions such
More informationLD7576/76H/76J/76K 12/9/2009
12/9/2009 Green-Mode PWM Controller with High-Voltage Start-Up Circuit and Adjustable OLP Delay Time REV. 04a General Description The LD7576X series brings high performance, and combines highly integrated
More informationLD7531 6/25/2008. Green-Mode PWM Controller with Frequency Trembling and Integrated Protections. Features. General Description.
REV: 00 LD7531 6/25/2008 Green-Mode PWM Controller with Frequency Trembling and Integrated Protections General Description The LD7531 is built-in with several functions, protection and EMI-improved solution
More informationVCC. UVLO internal bias & Vref. Vref OK. PWM Comparator. + + Ramp from Oscillator GND
Block Diagram VCC 40V 16.0V/ 11.4V UVLO internal bias & Vref RT OSC EN Vref OK EN OUT Green-Mode Oscillator S COMP 2R R Q R PWM Comparator CS Leading Edge Blanking + + Ramp from Oscillator GND Absolute
More informationLD /8/2013. Green-Mode PWM Controller with Frequency Swapping and Integrated Protections. General Description. Features.
10/8/2013 Green-Mode PWM Controller with Frequency Swapping and Integrated Protections Rev. 00 General Description The LD5530 is built-in with several functions, protection and EMI-improved solution in
More informationLD7830 VSEN GND ISEN COMP
8/17/2012 High Power Factor Flyback LED Controller with HV Start-up REV: 01a General Description The LD7830 is a HV start-up Flyback PFC controller, specially designed for LED lighting appliances. It operates
More informationLD /01/2013. Boost Controller for LED Backlight. General Description. Features. Applications. Typical Application REV: 00
04/01/2013 Boost Controller for LED Backlight REV: 00 General Description The LD5861 is a wide-input asynchronous current mode boost controller, capable to operate in the range between 9V and 28V and to
More informationLD /10/2016. Green-Mode PWM Controller with Frequency Swapping and Integrated Protections. General Description. Features.
Green-Mode PWM Controller with Frequency Swapping and Integrated Protections REV: 00 General Description The is built-in with several functions, protection and EMI-improved solution in a tiny package.
More informationLD9704R 03/15/2017. Green-Mode PWM Controller with Frequency Swapping with protections and MOSFET Integrated. General Description.
Green-Mode PWM Controller with Frequency Swapping with protections and MOSFET Integrated REV. 00 General Description The is built-in with several functions, protection and EMI-improved solution within
More informationLD5857 4/15/2014. Boost Controller for LED Backlight. General Description. Features. Applications. Typical Application REV: 00
4/15/2014 Boost Controller for LED Backlight REV: 00 General Description The LD5857 is a wide-input asynchronous current mode boost controller, capable to operate in the range between 9V and 28V and to
More informationLD5536 7/16/2015. Green-Mode PWM Controller with Frequency Swapping. and Integrated Protections. General Description. Features.
REV: 01 Green-Mode PWM Controller with Frequency Swapping General Description The is built-in with several functions, protection and EMI-improved solution in a tiny package. It takes less components-counts
More informationLD7838GR. High Power Factor Flyback LED Controller. with HV Start-up. Features. General Description. Applications. Typical Application 11/22/2016
High Power Factor Flyback LED Controller with HV Start-up REV. 01 General Description The is a 700V HV start-up active PFC Flyback controller, specially designed for LED lighting application. This device
More informationPreliminary GR8875N Series
Green-Mode PWM Controller with High Voltage Startup Circuit Features High-Voltage (700V) Startup Circuit Very Low Startup Current (
More informationGreen-Mode PWM Controller with Integrated Protections
Green-Mode PWM Controller with Integrated Protections Features Current mode PWM Very low startup current Under-voltage lockout (UVLO) Non-audible-noise green-mode control Programmable switching frequency
More informationGreen-Mode PWM Controller with Integrated Protections
Green-Mode PWM Controller with Integrated Protections Features Current mode control Very low startup current Under-voltage lockout (UVLO) Non-audible-noise green-mode control Programmable switching frequency
More informationGreen-Mode PWM Controller with Hiccup Protection
Green-Mode PWM Controller with Hiccup Protection Features Current Mode Control Standby Power below 100mW Under-Voltage Lockout (UVLO) Non-Audible-Noise Green-Mode Control 65KHz Switching Frequency Internal
More informationGreen-Mode PWM Controller with Hiccup Protection
Green-Mode PWM Controller with Hiccup Protection Features Current Mode Control Standby Power below 100mW Under-Voltage Lockout (UVLO) Non-Audible-Noise Green-Mode Control 65KHz Switching Frequency Internal
More informationPreliminary GR1230R. Multi-Mode PWM Controller with Integrated Protections. Features. Description. Applications. Typical Application Information
Multi-Mode PWM Controller with Integrated Protections Features Low Start-Up Current (
More informationGreen-Mode PWM Controller with Hiccup Protection
Green-Mode PWM Controller with Hiccup Protection Features Current mode control Standby power below 100mW Under-voltage lockout (UVLO) Non-audible-noise green-mode control 100KHz switching frequency Internal
More informationLD7591 3/4/2010. Transition-Mode PFC Controller with Fault Condition Protection. Features. General Description. Applications
3/4/2010 Transition-Mode PFC Controller with Fault Condition Protection REV. 00 General Description The LD7591 is a voltage mode PFC controller operating on transition mode, with several integrated functions
More informationGreen mode PWM Flyback Controller with External Over Temperature Protection
Green mode PWM Flyback Controller with External Over Temperature Protection General Description is a high performance, low startup current, low cost, current mode PWM controller with green mode power saving.
More informationGreen-Mode PWM Controller with Integrated Protections
Green-Mode PWM Controller with Integrated Protections Features High-voltage (500) startup circuit Current mode PWM ery low startup current (
More informationPreliminary GL8211/11B
High Power Factor & Accuracy Constant Current LED Driver Features High Power Factor by One Cycle Control Accuracy Constant Current Low BOM Cost Linear Dimming on DIM Pin Average Current / Fixed Frequency
More informationLD9010A 12/08/2016. Green Mode Power Switch for Non-isolation Power Converter. General Description. Features. Typical Application REV.
Green Mode Power witch for Non-isolation Power Converter REV. 00 General escription The is a green mode PFM driver integrated with 700V MOFET in a OP package. It is capable to operate at a maximum frequency
More informationLD5538R 08/01/2016. Green-Mode PWM Controller with Frequency Swapping and Integrated Protections. Features. General Description.
REV. 00 GreenMode PWM Controller with Frequency Swapping and Integrated Protections General Description The is builtin with several functions, protection and EMIimproved solution in a tiny package. It
More informationLD /29/2016. Green-Mode PWM Controller with Frequency Swapping and Integrated Protections. Features. General Description.
GreenMode PWM Controller with Frequency Swapping and Integrated Protections REV. 01 General Description The is builtin with several functions, protection and EMIimproved solution in a tiny package. It
More informationLD5718AC 09/22/2016. Primary-Side Quasi-Resonant Controller, Operating in CV/CC Mode. Features. General Description. Applications. Typical Application
REV. 00 General Description Primary-Side Quasi-Resonant Controller, The is a primary-side Quasi-Resonant controller capable of operating in CV/CC mode for small to medium power AC/DC charger and adapter.
More informationEM8631S. Green mode PWM Flyback Controller. Features. General Description. Ordering Information. Applications. Typical Application Circuit
Green mode PWM Flyback Controller General Description is a high performance, low startup current, low cost, current mode PWM controller with green mode power saving. The integrates functions of Soft Start(SS),
More informationPreliminary GR9210RL. Multi-Mode PWM Power Switch with Primary-Side Feedback. Features. Description. Applications. Typical Application Information
Multi-Mode PWM Power Switch with Primary-Side Feedback Features Built-in 650V Power MOSFET Low Start-Up Current (
More informationCR6842. Green-Power PWM Controller with Freq. Jittering. Features. Applications. General Description. Leading-edge blanking on Sense input
Green-Power PWM Controller with Freq. Jittering Features Low Cost, Green-Power Burst-Mode PWM Very Low Start-up Current ( about 7.5µA) Low Operating Current ( about 3.0mA) Current Mode Operation Under
More informationGreen-Mode PWM Controller with Integrated Protections
Green-Mode PWM Controller with Integrated Protections Features High-voltage (500) startup circuit Current mode PWM ery low startup current (
More informationTS19702 High Power Factor Corrector LED Driver
SOT-26 Pin Definition: 1. VCC 2. Ground 3. Output 4. Dimming 5. Compensation 6. Current Sense Description The TS19702 is a highly-integrated, low startup current, average current mode, one cycle control
More informationLD /28/2015. LED Lighting Output Current Ripple Suppressor. General Description. Features. Applications. Typical Application REV.
LED Lighting Output Current Ripple Suppressor REV. 00 General Description The is an output current ripple suppressor for LED lighting. It supports easy use at output terminal with isolation or non-isolation
More informationLD /07/ Channel LED Backlight Driver. General Description. Features. Applications. Typical Application REV: 05
10/07/2011 4 Channel LED Backlight Driver REV: 05 General Description The LD7889 is a 4-channel linear current controller which combines with a boost switching controller. It s an ideal solution for driving
More informationHigh Voltage 4-Channel LED Controller Driver. Features. 33uF NMOS R1 OVP PWM DIM LOSC STATUS. FB4 Gate4. Sense4 FB3 Gate3 Sense3
High Voltage 4-Channel LED Controller Driver LD7890 11/5/2013 REV: 01 General Description The LD7890 is a 4-channel LED controller with a boost switching controller. It s an ideal solution for driving
More informationFAN6747WALMY Highly Integrated Green-Mode PWM Controller
FAN6747WALMY Highly Integrated Green-Mode PWM Controller Features High-Voltage Startup AC-Line Brownout Protection by HV Pin Constant Output Power Limit by HV Pin (Full AC-Line Range) Built-in 8ms Soft-Start
More informationFAN6751MR Highly-Integrated Green-Mode PWM Controller
FAN6751MR Highly-Integrated Green-Mode PWM Controller Features High-Voltage Startup Low Operating Current: 4mA Linearly Decreasing PWM Frequency to 18KHz Fixed PWM Frequency: 65KHz Peak-current-mode Control
More informationCurrent Mode PWM Power Switch. Code A B G H I J Year Code A B C Month Jan. Feb. Mar. Apr.
Current Mode PWM Power Switch Preliminary GR8935 Features Current mode PWM ery low startup current Under-voltage lockout ULO Non-audible-noise green-mode control Fixed switching frequency of 50KHz Cycle-by-cycle
More informationHigh Power Factor & Accuracy Constant Current LED Driver
High Power Factor & Accuracy Constant Current LED Driver Features Built-in 600V Power MOSFET TM (Transition Mode) Fixed On -Time PFC Control Accuracy Constant Current Low BOM Cost Inductor Size Reduction
More informationLD7513A 11/15/2013. Primary Side Quasi-Resonant BJT Controller with CV/CC Operation. Features. General Description. Applications. Typical Application
Primary ide Quasi-esonant BJT Controller with CV/CC Operation LD7513A 11/15/2013 ev. 00 General Description The LD7513A is an excellent primary side feedback BJT controller with CV/CC operation, integrated
More informationCurrent Mode PWM Power Switch GR8935L XXXXX
Current Mode PWM Power Switch Preliminary GR8935L Features Current mode PWM ery low startup current Under-voltage lockout ULO Non-audible-noise green-mode control Fixed switching frequency of 50KHz Cycle-by-cycle
More informationVERSATILE COST EFFECTIVE GREEN PWM CONTROLLER General Description. Features
General Description The is a low startup current, current mode PWM controller with green-mode power-saving operation. The PWM switching frequency at normal operation is externally programmable and is trimmed
More informationLD7889A 3/29/ Channel LED Backlight Driver. General Description. Features. Applications. Typical Application REV: 00
3/29/2012 4-Channel LED Backlight Driver REV: 00 General Description The LD7889A is a 4-channel linear current controller which combines with a boost switching controller. It s an ideal solution for driving
More informationQuasi-Resonant Flyback PWM Controller
Quasi-Resonant Flyback PWM Controller Features QR ZVS at switch turn-on PFM mode at light load condition Controllable built-in PFC power supply 130 KHz maximum frequency limit Internal minimum off-time
More informationNot Recommended. TS19702 High Power Factor Corrector LED Driver. Description. Features. Application. Ordering Information
SOT-26 Pin Definition: 1. VCC 2. Ground 3. Output 4. Dimming 5. Compensation 6. Current Sense Description The TS19702 is a highly-integrated, low startup current, average current mode, one cycle control
More informationSingle-Stage Buck Current Control LED Driver with High Voltage MOSFET Integrated
Single-Stage Buck Current Control LED Driver with High Voltage MOSFET Integrated DESCRIPTION The TS19751 is a high performance LED driver which accuracy constant current PWM controller with high voltage
More informationFL103 Primary-Side-Regulation PWM Controller for LED Illumination
FL103 Primary-Side-Regulation PWM Controller for LED Illumination Features Low Standby Power: < 30mW High-Voltage Startup Few External Component Counts Constant-Voltage (CV) and Constant-Current (CC) Control
More informationCR6853. Novel Low Cost Green-Power PWM Controller With Low EMI Technique
Novel Low Cost Green-Power PWM Controller With Low EMI Technique Feature Low Cost, PWM&PFM&CRM (Cycle Reset Mode) Low Start-up Current (about 1.5µA) Low Operating Current (about 1.4mA) Current Mode Operation
More informationSingle-Stage PFC Buck Current Control LED Driver With High Voltage MOSFET Integrated
Single-Stage PFC Buck Current Control LED Driver With High Voltage MOSFET Integrated DESCRIPTION TS19721A a very efficient constant current controller for driving LED lamps in non-dimmable lighting applications.
More informationAP3103A. Description. Pin Assignments. Features. Applications. A Product Line of. Diodes Incorporated COST EFFECTIVE GREEN PWM CONTROLLER AP3103A
COST EFFECTIVE GREEN PWM CONTROLLER Description Pin Assignments The is a low startup current, current mode PWM controller with green-mode power-saving operation. The PWM switching frequency at normal operation
More informationSingle-Stage PFC Buck Current Control LED Driver With High Voltage MOSFET Integrated
Single-Stage PFC Buck Current Control LED Driver With High Voltage MOSFET Integrated DESCRIPTION TS19721D a very efficient constant current controller for driving LED lamps in non-dimmable lighting applications.
More informationFAN6747 Highly Integrated Green-Mode PWM Controller
FAN6747 Highly Integrated Green-Mode PWM Controller Features High-Voltage JFET Startup AC-Line Brownout Protection by HV Pin Constant Output Power Limit by HV Pin (Full AC-Line Range) Two-Level Over-Current
More informationFAN6754 Highly Integrated Green- Mode PWM Controller Brownout and V Limit Adjustment by HV Pin
FAN6754 Highly Integrated Green- Mode PWM Controller Brownout and V Limit Adjustment by HV Pin Features High-Voltage Startup AC Input Brownout Protection with Hysteresis Monitor HV to Adjust V Limit Low
More informationAP3105/V/L/R. Pin Assignments. Description. Applications. Features. A Product Line of. Diodes Incorporated COST EFFECTIVE GREEN PWM CONTROLLER
COST EFFECTIVE GREEN PWM CONTROLLER Description Pin Assignments The is a low startup current, current mode PWM (Top View) controller with green-mode power-saving operation. The PWM switching frequency
More informationNovel Low Cost Green-Power PWM Controller
2263 Novel Low Cost Green-Power PWM Controller Features Low Cost, PWM&PFM&CRM (Cycle Reset Mode) Low Start-up Current (about 8µA) Low Operating Current (about 2mA) Current Mode Operation Under Voltage
More informationUNISONIC TECHNOLOGIES CO., LTD UC1103 Preliminary CMOS IC
UNISONIC TECHNOLOGIES CO., LTD HIGH PRECISION CC/CV PRIMARY SIDE SWITCHING REGULATOR DESCRIPTION The UTC UC1103 is a primary control unit for switch mode charger and adapter applications. The controlled
More informationFlexible Dimming Solution by PWM / 0-10V / Potentiometer. Features 5V_PWM LED+ 0 10V RDIM DDIM CDIM RISET. RPhoto Min.
Flexible Dimming Solution by PWM / 0-10V / Potentiometer REV. 00 General Description The contains a processor which can convert the three different inputs of dimmer type include 0~10V DC potential, 0~100%
More informationUNISONIC TECHNOLOGIES CO., LTD UCSR3651S Preliminary CMOS IC
UNISONIC TECHNOLOGIES CO., LTD UCSR3651S Preliminary CMOS IC HIGH PRECISION CC/CV PRIMARY-SIDE PWM POWER SWITCH DESCRIPTION The UTC UCSR3651S is a primary control switch mode charger and adapter applications.
More informationDESCRIPTION FEATURES PROTECTION FEATURES APPLICATIONS. RS2320 High Accurate Non-Isolated Buck LED Driver
High Accurate Non-Isolated Buck LED Driver DESCRIPTION RS2320 is especially designed for non-isolated LED driver. The building in perfect current compensation function ensures the accurate output current.
More informationSG6860 Low-Cost, Green-Mode PWM Controller for Flyback Converters
SG6860 Low-Cost, Green-Mode PWM Controller for Flyback Converters Features Green-Mode PWM Supports the Blue Angel Eco Standard Low Startup Current: 9µA Low Operating Current: 3mA Leading-Edge Blanking
More informationSingle-Stage PFC Buck Current Control LED Driver
Single-Stage PFC Buck Current Control LED Driver DESCRIPTION The TS19720 is a high power factor and high accuracy constant current PWM controller. It is able to control total harmonic distortion (THD)
More informationAP8022. AiT Semiconductor Inc. APPLICATION ORDERING INFORMATION TYPICAL APPLICATION
DESCRIPTION The consists of a Pulse Width Modulator (PWM) controller and a power MOSFET, specifically designed for a high performance off-line converter with minimal external components. offers complete
More informationHighly Integrated Green-Mode PWM Controller
FAN6755 Highly Integrated Green-Mode PWM Controller Features Internal High-Voltage Startup Low Operating Current (Maximum: ma) Adaptive Decreasing of PWM Frequency to 3KHz at Light-Load condition to Improve
More information23V, 3A, 340KHz Synchronous Step-Down DC/DC Converter
23V, 3A, 340KHz Synchronous Step-Down DC/DC Converter Description The is a synchronous step-down DC/DC converter that provides wide 4.5V to 23V input voltage range and 3A continuous load current capability.
More informationFAN6862R / FAN6862L Highly Integrated Green-Mode PWM Controller
FAN6862R / FAN6862L Highly Integrated Green-Mode PWM Controller Features Low Startup Current: 8µA Low Operating Current in Green Mode: 3mA Peak-Current-Mode Operation with Cycle-by-Cycle Current Limiting
More informationFSFR-XS Series Fairchild Power Switch (FPS ) for Half-Bridge Resonant Converters
February 203 FSFR-XS Series Fairchild Power Switch (FPS ) for Half-Bridge Resonant Converters Features Variable Frequency Control with 50% Duty Cycle for Half-Bridge Resonant Converter Topology High Efficiency
More informationGREEN MODE PWM CONTROLLER General Description. Features. Applications
查询 供应商 捷多邦, 专业 PCB 打样工厂,24 小时加急出货 General Description The is a green PWM controller operating in current mode. It is specially designed for off-line AC- DC adapter and battery charger applications where
More information10A Current Mode Non-Synchronous PWM Boost Converter
10A Current Mode Non-Synchronous PWM Boost Converter General Description The is a current mode boost DC-DC converter. It is PWM circuitry with built-in 15mΩ power MOSFET make this regulator highly power
More informationRT8477. High Voltage High Current LED Driver. Features. General Description. Applications. Ordering Information RT8477. Pin Configurations (TOP VIEW)
High Voltage High Current LED Driver General Description The is a current mode PWM controller designed to drive an external MOSFET for high current LED applications with wide input voltage (4.5V to 50V)
More informationDP9126IX. Non-Isolated Buck APFC Offline LED Power Switch FEATURES GENERAL DESCRIPTION APPLICATIONS TYPICAL APPLICATION CIRCUIT
Non-Isolated Buck APFC Offline LED Power Switch DP9126IX FEATURES Active PFC for High PF and Low THD PF>0.9 with Universal Input Built-in HV Startup and IC Power Supply Circuit Internal 650V Power MOSFET
More informationLow-Noise 4.5A Step-Up Current Mode PWM Converter
Low-Noise 4.5A Step-Up Current Mode PWM Converter FP6298 General Description The FP6298 is a current mode boost DC-DC converter. It is PWM circuitry with built-in 0.08Ω power MOSFET make this regulator
More informationMP4012 High-Brightness, High-Current Accuracy WLED Controller
The Future of Analog IC Technology MP4012 High-Brightness, High-Current Accuracy WLED Controller DESCRIPTION The MP4012 is a current mode controller designed for driving the high brightness Light Emitting
More informationFL7732 Single-Stage PFC Primary-Side-Regulation Offline LED Driver
FL7732 Single-Stage PFC Primary-Side-Regulation Offline LED Driver Features Cost-Effective Solution: No Input Bulk Capacitor or Feedback Circuitry Power Factor Correction Accurate Constant-Current (CC)
More informationLX7157B 3V Input, High Frequency, 3A Step-Down Converter Production Datasheet
Description LX7157B is a step-down PWM regulator IC with integrated high side P-CH MOSFET and low side N-CH MOSFET. The 2.2MHz switching frequency facilitates small output filter components. The operational
More informationFP A Current Mode Non-Synchronous PWM Boost Converter
10A Current Mode Non-Synchronous PWM Boost Converter General Description The is a current mode boost DC-DC converter. It is PWM circuitry with built-in 15mΩ power MOSFET make this regulator highly power
More informationEUP A,30V,500KHz Step-Down Converter DESCRIPTION FEATURES APPLICATIONS. Typical Application Circuit
5A,30V,500KHz Step-Down Converter DESCRIPTION The is current mode, step-down switching regulator capable of driving 5A continuous load with excellent line and load regulation. The operates with an input
More informationFAN6755W / FAN6755UW mwsaver PWM Controller
May 03 FAN6755W / FAN6755UW mwsaver PWM Controller Features mwsaver Technology Provides Industry s Bestin-Class Standby Power
More informationPhase-Cut Dimmable and Active PFC for LED lighting With High Voltage MOSFET Integrated
Phase-Cut Dimmable and Active PFC for LED lighting With High Voltage MOSFET Integrated DESCRIPTION The TS19830CS is a phase-cut (TRIAC) dimmable constant current control IC with active power factor correction
More informationAP3102/V/L. Description. Pin Assignments NEW PRODUCT. Applications. Features. A Product Line of. Diodes Incorporated GREEN MODE PWM CONTROLLER
GREEN MODE PWM CONTROLLER Description Pin Assignments The series is a green-mode PWM controller with low start-up current. At normal operation, the switching frequency is externally programmable and trimmed
More informationG1513 High Performance Current Mode PWM Controller
ANALOG PWM IC 1. General Description The G1513 is a high performance AC/DC power supply controller for battery charger and adapter applications requirements up to 40W It can meet less than 80 mw standby
More informationSG6741A Highly Integrated Green-Mode PWM Controller
SG674A Highly Integrated Green-Mode PWM Controller Features High-Voltage Startup Low Operating Current: 4mA Linearly Decreasing PWM Frequency to 8kHz Frequency Hopping to Reduce EMI Emissions Peak-Current-Mode
More informationEUP V/12V Synchronous Buck PWM Controller DESCRIPTION FEATURES APPLICATIONS. Typical Application Circuit. 1
5V/12V Synchronous Buck PWM Controller DESCRIPTION The is a high efficiency, fixed 300kHz frequency, voltage mode, synchronous PWM controller. The device drives two low cost N-channel MOSFETs and is designed
More informationWD3122EC. Descriptions. Features. Applications. Order information. High Efficiency, 28 LEDS White LED Driver. Product specification
High Efficiency, 28 LEDS White LED Driver Descriptions The is a constant current, high efficiency LED driver. Internal MOSFET can drive up to 10 white LEDs in series and 3S9P LEDs with minimum 1.1A current
More informationG1102 High Precision CC/CV Primary-Side PWM Controller
ANALOG PWM IC 1. General Description G1102 is a high performance offline PWM controller for low power AC/DC charger and adaptor applications. It operates in primary-side regulation. Consequently, opto-coupler
More informationRT8409. Green Mode Buck Converter. General Description. Features
RT8409 Green Mode Buck Converter General Description The RT8409 integrates a power MOSFET controller. It is used for step down converters by well controlling the internal MOSFET and regulating a constant
More informationSMD7325 PWM Cntroller IC for Flyback Power Supply
FEATUES Excellent Gate Driving Capability for High Efficiency Performance 1uA Low Startup Current 0.8mA Low Operating Current Low Power Consumption at Burst Mode Multiple Protection Functions (OTP, OVP,
More informationTS19730 Single-Stage Low THD Buck-Boost PWM Control LED Driver
SOT-26 Pin Definition: 1. V CC 2. GND 3. OUT 4. CL 5. COM 6. CS Description The is a high power factor, low THD and high accuracy constant current PWM controller. achieves high power factor and high efficiency
More informationML4818 Phase Modulation/Soft Switching Controller
Phase Modulation/Soft Switching Controller www.fairchildsemi.com Features Full bridge phase modulation zero voltage switching circuit with programmable ZV transition times Constant frequency operation
More informationDP9122 Non-isolated Quasi-Resonant Buck LED Power Switch
FEATURES GENERAL DESCRIPTION Integrated with 500V MOSFET No Auxiliary Winding Needed Quasi-Resonant for High Efficiency Built-in Thermal Foldback Built-in Charging Circuit for Fast Start-Up ±4% CC Regulation
More informationFAN5340 Synchronous Constant-Current Series Boost LED Driver with PWM Brightness Control and Integrated Load Disconnect
April 2010 FAN5340 Synchronous Constant-Current Series Boost LED Driver with PWM Brightness Control and Integrated Load Disconnect Features Synchronous Current-Mode Boost Converter Up to 500mW Output Power
More information