Industrial wireless communication

Transcription

1 Industrial wireless communication Automation and M2M Edition 2015

2 Rugged connectivity solutions

3 Industrial wireless communication 4 Access points 6 Distribution boxes 8 Buildings 10 Vehicles 12 Antennas 14 RF cables 16 RF connectors 18 Fiber optic assemblies 20 Fiber optic cable systems 21 Fiber optic fiber management systems 22 Fiber optic cables 23 Your partner for system solutions HUBER+SUHNER is a leading international manufacturer and supplier of components and systems for electrical and optical connectivity. HUBER+SUHNER unites technical expertise in radio frequency technology, fiber optics and low frequency under one roof and offers a high-quality product range for the communication, transport and industrial markets. HUBER+SUHNER serves a variety of industries that have higher requirements on connectivity solutions due to the harsh environments in which they operate. The industrial environment imposes strict requirements for all products: optimal electrical performance, ease of installation, heat or fire resistance, electromagnetic compatibility (EMC), robustness or compactness can all be important, depending on the field of application.

4 Industrial wireless communication HUBER+SUHNER serves a variety of industries that have higher requirements on connectivity solutions due to the harsh environments in which they operate. In addition to traditional wired communications between devices, the industry is increasingly relying on wireless connections. The radio modules used work in the cellular or frequency ranges. Special products are required depending on the application: Stick antennas for direct mounting on access points Omnidirectional and directional antennas for installations mounted seperate from the access point Low profile antennas for installation on cabinets Stick antennas for installation on the building wall or a mast Vehicle antennas RADOX cables (FO, RF, LF) with maximum temperature resistance HUBER+SUHNER components in industrial applications are developed for a long service life under harsh environmental conditions and meet the following standards: Environmental requirements as per EN (temperature range 40 to Water- and dust-proof as per DIN 40050/EN HUBER+SUHNER Industrial wireless communication 85 C)

5 Antennas Our product portfolio of antennas and other components supports the following applications: Mobile communication Others SISO IEEE a/b/g/h/p/s MIMO IEEE802.11n/ac SISO 2G/3G/4G/MIMO 4G Public safety 4.9 GHz, WiMAX 3.5 GHz Bluetooth 2.45 GHz IEEE Zigbee 2.45 GHz, Wireless HART IEEE Radio frequency connections Our comprehensive portfolio of industrial RF cables, connectors and assemblies is characterised by the following properties: Water- and UV-resistant Resistant to oils and chemicals A wide operational temperature range Low-loss and highly flexible Various connectors such as N, SMA, TNC, SMA-R, QMA, QN EMP and lightning protection A wide range of protection solutions for data and coaxial cables in industrial environments to protect the active components against power surges and lightning. Data connections (copper) Our expertise in data communication cables in combination with electron-beam crosslinked materials technology results in databus cables preassembled on request that meet requirements for excellent mechanical and electrical properties even at high temperatures and in harsh environmental conditions. Data connections (fiber optics) Fiber optic connections are insensitive to electro-magnetic interferences and predestined for long distances. Connection-ready, pre-assembled solutions significantly reduce installation times and costs. Our portfolio includes solutions for the toughest requirements in terms of fire safety and environmental resistance. Product details see page 14ff HUBER+SUHNER Industrial wireless communication 5

6 Access points The direct installation of an antenna on the access point is often the simplest way of connecting to a wireless network. Remote antennas can also be used in areas with difficult radio communication condition. Applications Access point or cellular connection networks Wireless sensors Main benefits Low profile, easy handling Corrosion protected and highly dust- and waterproof Flexibility of production systems 6 HUBER+SUHNER Industrial wireless communication Power 1 Antenna 2 Data connection (copper or fiber optics)

7 Antennas Direct installation on the access point SENCITY OMNI-S This stick antenna is small, compact and can be installed directly on the access point. Installation on a wall or mast SENCITY SPOT-S A robust, directional antenna for optimum coverage in areas with difficult radio communication conditions. Data connections (copper) Our expertise in data communication cables in combination with electron-beam crosslinked materials technology results in databus cables preassembled on request that meet requirements for excellent mechanical and electrical properties even at high temperatures and in harsh environmental conditions. Data connections (fiber optics) MASTERLINE extreme is a pre-assembled, multi-fiber cable system equipped directly with proven ODC connectors (screw-type or push-pull) by HUBER+SUHNER. This ready-foruse cable system is characterised by high environmental stability and robust connectors, making it ideal for industrial applications. Product details see page 14ff HUBER+SUHNER Industrial wireless communication 7

8 Distribution boxes Vandal-proof antennas are used to connect distributions boxes in public spaces to a radio network. Since the maintenance of these sites is expensive, the product service life plays a very important role under the given environmental conditions. Applications Access point or cellular connection offload in urban areas Smart metering Main benefits Protection against vandalism Low profile Single hole installation with metal antenna baseplate (depending on model) Highly dust- and waterproof 8 HUBER+SUHNER Industrial wireless communication Power 1 Antenna 2 Radio frequency connection 3 EMP and lightning protection 4 Data connection (fiber optics)

9 Antennas SENCITY OMNI-S Omni-directional antenna for outdoor use with rugged housing and single hole mounting. Configurable SENCITY OMNI-S (up to) 4 4 MIMO and Cellular/4G LTE antenna for outdoor or indoor use with a rugged, low-profile housing for single hole installations. Radio frequency connections Depending on the installation, the antenna is connected to the access point using a low attenuation cable, such as SX_04172_B-60. However, if space is at a premium, more value is placed on a space-saving, flexible cables. Properties which are embodied by the ENVIROFLEX 316_D, for example. EMP and lightning protection Coaxial protection components from the 3400 and 3406 series protect industrial coaxial connections up to 6 GHz using gas capsule or λ/4 short-circuit technology and are waterproof. Data connections (fiber optics) Ideally, pre-assembled cable systems, such as the MASTERLINE Classic, are used together with distribution boxes for quick and easy connection of active systems in LiSA cabinets. This special portfolio is supplemented by splice and patch panels, as well as patch cables for internally connecting cable terminators to active systems such as wireless modules or access points. Product details see page 14ff HUBER+SUHNER Industrial wireless communication 9

10 Buildings Buildings or locations with difficult wireless coverage conditions can be connected to a wireless or cellular network using stick antennas or directional antennas. The products are installed on a corresponding bracket at a suitable position on a wall or a mast. Access point Applications or cellular connection Difficult wireless coverage conditions Reception in high bay warehouses Main benefits High antenna gain Corrosion protected Highly dust- and waterproof 10 HUBER+SUHNER Industrial wireless communication Power 1 Antenna 2 Radio frequency connection 3 EMP and lightning protection 4 Data connection (fiber optics)

11 Antennas SENCITY OMNI-S/OMNI-M Omni-directional or mobile communication stick antenna for outdoor use. SENCITY SPOT-S/SPOT-M/SPOT-L Directional antenna for outdoor use with a rugged housing (IP66/67) with various installation options. Radio frequency connections These applications require installations capable of meeting the high demands regarding outdoor and environmental conditions. Typically the connection to the antenna is a long feeder cable (e.g., SPUMA 400_FR-01) with a larger diameter and low loss in combination with a short jumper cable with a smaller diameter (e.g., ENVIROFLEX 316_ D) and thus improved flexibility. EMP and lightning protection To prevent damage to the radio equipment key must be protected against overvoltage. Protection components from the 3414 series for data cables protect industrial Ethernet connections (Cat 5 and Cat 6) and are also available in waterproof designs to IP68. Coaxial protection components from the 3400 and 3406 series protect industrial coaxial connections from DC to 6 GHz gas capsule or λ/4 short-circuit technology and are waterproof. Data connections (fiber optics) Rugged, waterproof and dust-tight cable systems such as MASTERLINE extreme are suitable for connecting antenna amplifiers and access points to masts and walls. Our ODC connectors ensure reliable connections thanks to their protected optical end faces. Fiber optic solutions also include hybrid cable systems for data and power connections, halogen free and low smoke cables (LSFH ) for excellent fire protection, as well as compact distribution boxes at transfer or distribution points. Product details see page 14ff HUBER+SUHNER Industrial wireless communication 11

12 Vehicles Antennas for vehicles are designed to match the requirements of the specific vehicle in which they are used. In an industrial environment, the demands on robustness are high. Applications Access point or cellular connection Bus/truck, robot or rail vehicles Main benefits Impact-resistant housing Single hole installation with metal antenna baseplate Highly dust- and waterproof 12 HUBER+SUHNER Industrial wireless communication 1 Antenna 2 Radio frequency connection

13 Antennas SENCITY OMNI-S Omni-directional antenna for outdoor use with extremely rugged housing and single hole installation. SENCITY ROAD Robust multi-band antenna for heavy vehicles. Easy installation with separate cable connections for each application and single hole installation. SENCITY RAIL Designed as a roof top antenna for rail vehicles, this mobile antenna has a very robust housing. Radio frequency connections The comprehensive range of cable assemblies meet different requirements depending on vehicle use, whether in terms of temperature requirements, environmental conditions, oil and fluid resistance, or specific safety standards in case of fire. The typical cable types for this application are ENVIROFLEX 178_D, a very flexible cable with a very small diameter, and SX_04172_B-60 with very low attenuation performance. Product details see page 14ff HUBER+SUHNER Industrial wireless communication 13

14 Antennas OMNI-S / OMNI-M antennas direct mount on N-connector port of acces point Antennas Type Service Frequency Gain Dimensions SOA-2456/360/1/0/V Cellular MHz 2 dbi Ø mm SOA-2455/360/6/0/V dual-band MHz MHz 5 dbi 6 dbi Ø mm SWA-1727/360/2/0/V Cellular LTE MHz 2 dbi Ø mm OMNI-S antennas mount on roof or cabinet / distribution box Antennas Type Service Frequency Gain Dimensions SWA-2459/360/7/20/V_ MHz 6 dbi Ø mm SWA-2459/360/6/20/MIMO and LTE 3 3 MIMO MHz MHz MHz 3 dbi 4 dbi 6 dbi Ø mm SWA-2459/360/6/20/ MIMO_ and LTE 4 4 MIMO MHz MHz MHz 3 dbi 4 dbi 6 dbi Ø mm SWA-0827/360/3/20/V Cellular 4G LTE (EUR) SISO MHz MHz 3 dbi 5 dbi Ø mm SWA-0727/360/3/20/V Cellular 4G LTE (US) SISO MHz MHz 3 dbi 5 dbi Ø mm 14 HUBER+SUHNER Industrial wireless communication

15 OMNI-S antennas indoor cabinet or ceiling mount Antennas Type Service Frequency Gain Dimensions SWA-2459/360/4/45/V dual-band MHz MHz 4 dbi 6.5 dbi Ø mm SWA-2459/360/4/45/V dual-band MHz MHz 4 dbi 6.5 dbi Ø mm SWA-2456/360/6/0/MIMO MIMO MHz MHz 4 dbi 6 dbi mm SWA-2456/360/6/0/ MIMO_ MIMO MHz MHz 4 dbi 6 dbi mm Remark: Optional ceiling mount bracket available, item see data sheets OMNI-M antennas pole or wall mount Antennas Type Service Frequency Gain Dimensions SOA-2400/360/6/0/V MHz 6 dbi Ø mm SOA-5600/360/5/0/V MHz MHz 5 dbi Ø mm SOA-2455/360/6/0/V dual-band MHz MHz 5 dbi 6 dbi Ø mm SWA-1727/360/2/0/V Cellular LTE MHz 2 dbi Ø mm SWA-0827/360/2/0/V Cellular 4G LTE MHz MHz 2 dbi 3 dbi Ø mm Remark: L-bracket included HUBER+SUHNER Industrial wireless communication 15

16 Antennas SPOT-S antannas wall mount or pole mount with extra bracket Antennas Type Service Frequency Gain Dimensions SPA-2400/75/9/0/V_ MHz 8.5 dbi mm SPA-2400/75/9/0/V_ MHz 8.5 dbi mm SPA-2400/75/8/0/DS MIMO two ports MHz ± 45 slant 8 dbi mm SPA-2400/75/8/0/DS MIMO two ports MHz ± 45 slant 8 dbi mm SPA-5100/40/14/0/V MHz 13 dbi mm SPA-5600/40/14/0/V_ MHz 14 dbi mm SPA-5600/40/14/0/V_ MHz 14 dbi mm SPA-5600/70/9/0/DS MIMO two ports MHz ± 45 slant 9 dbi mm SPA-5600/70/9/0/DS MIMO two ports MHz ± 45 slant 9 dbi mm SPA-5600/65/9/0/MIMO_ MIMO three ports MHz vert., ± 45 slant 8 dbi mm SPA-2456/75/9/0/DF_ dual-band single-port MHz MHz 9 dbi 9 dbi mm SPA-2456/75/9/0/DF_ dual-band two ports MHz MHz 9 dbi 9 dbi mm Remark: Optional down-/sidetilt bracket available, see data sheets 16 HUBER+SUHNER Industrial wireless communication

17 SPOT-M/SPOT-L antennas pole or wall mount Antennas Type Service Frequency Gain Dimensions SPA-2400/30/14/0/V LTE MHz MHz MHz 14 dbi 14.5 dbi 15 dbi mm SPA-2400/20/17/0/V LTE MHz MHz MHz 15.5 dbi 17 dbi 18 dbi mm SPA-2400/20/18/0/DS LTE 2600 dual-slant MHz MHz ± 45 pol 17.5 dbi 18 dbi mm SPA-5600/18/19/0/V MHz MHz MHz 18 dbi 19 dbi 18 dbi mm SPA-5400/9/22/0/V MHz MHz 22 dbi 23 dbi mm SPA-5600/20/16/0/VH dual-slant MHz MHz vert./hor. pol 15 dbi 16 dbi mm SPA-5500/10/23/0/VH dual-slant MHz MHz vert./hor. pol 22 dbi 23 dbi mm SPA-5600/45/18/0/MIMO MIMO MHz MHz MHz 17 dbi 18 dbi 16 dbi mm Remark: Pole/wall mount bracked buy separately, suitable item see data sheets Omni-directional antennas vehicle mount Antennas Type Service Frequency Gain Dimensions SWA-2459/360/7/20/V_ dual-band MHz 6 dbi Ø mm SWA-0860/360/5/10/DFRX WiFI Cell/LTE GPS/LNA MHz MHz MHz 5 dbi 6 dbi 7 dbi mm SWA-0825/360/5/30/V Cellular 4G LTE SISO MHz 5 dbi mm HUBER+SUHNER Industrial wireless communication 17

18 RF cable HUBER+SUHNER is offering a wide range of RF coaxial cables which are developed for highest expectations. A carefully balanced range of flexible coaxial cables provide best performance where challenging requirements arise. Our high quality cables offer excellent electrical and mechanical characteristics and are used globally in high demanding applications. Professional and extensive support in combination with a comprehensive product portfolio makes us to a leading supplier of radio frequency solutions. Standard line: high-precision coaxial cable Our Standard line includes RG coaxial cables to MIL standards, as well as the halogenfree alternatives of the G and GX series, which are mechanically compatible with RG in use. While the G-series uses LSFH (low smoke free of halogen) jacket material, RADOX additionally offers a higher temperature range, and maximum environmental resistance. RG G GX Dielectric material PE PE PEX Jacket material PVC LSFH RADOX Halogen free Low smoke Flame retardancy Temperature range Weather resistance High precision RG standard Halogen-free options Outer diameter (in mm) RG G GX 3 RG_174_A/U G_02262 GX_ RG_58_C/U G_ GX_ RG_223_/U G_03262_D GX_03272_D RG_213_/U GX_ RG_214_/U RG_214 hiflex G_07262_D GX_07272_D PE SPE SPEX PTFE PVC FEP LSFH TM RADOX Polyethylene Foamed polyethylene Foamed polyethylene, radiation cross-linked Polytetrafluoroethylene Polyvinyl chloride Fluorethylenepropylene copolymer Low smoke and halogen free Cross-linked jacket material 18 HUBER+SUHNER Industrial wireless communication

19 Performance line: high-temperature coaxial cable The PTFE/FEP cables from our RG series are designed for applications at up to 200 C and are characterised by low losses especially at high frequencies. The cables in the ENVIROFLEX family do not contain fluorine plastics either in the dielectric or in the jacket and thus provide a robust and environmentally friendly option RG ENVIROFLEX Dielectric material PTFE SPEX Temperature range High performance RG standard Jacket material FEP RADOX Halogen free Low smoke Flame retardancy Not flammable Temperature range Weather resistance Outer diameter (in mm) RG G 2 3 RG_178_B/U K_01252_D RG_316_/U K_02252_D EF_178 EF_178_D EF_316 EF_316_D 5 RG_400_/U EF_400 5 RG_142_B/U EF_ RG_393_/U EF_393 Foam line: flexible, low-attenuation cable The 3 product series SPUMA, S and SX provide lowest attenuation, high flexibility and optimal shielding. The S series with LSFH jacket material and the radiation cross-linked SX series with the RADOX jacket also offer extremely high flame protection. SPUMA SPUMA-FR & S SX Dielectric material SPE SPE SPEX Low attenuation Excellent shielding High flexibility Jacket material PE LSFH RADOX Halogen free Low smoke Flame retardancy Temperature range Weather resistance Outer diameter (in mm) SPUMA SPUMA-FR & S SX 3 S_02162_B 4.5 SPUMA_195 S_03262_B-61 SX_03272_B-60 6 SPUMA_240 S_04162_B-60 SX_04172_B SPUMA_400 SPUMA_400- FR SPUMA_600 HUBER+SUHNER Industrial wireless communication 19

20 RF connectors Industrial applications mainly use N, SMA and TNC. QMA and QN connectors are a good choice for quick pluggability and vibration safety. R-SMAs (reverse polarity SMAs) are standard equipment on some access points. N series connectors Available with 50 Ω and 75 Ω impedance Frequency range: DC 18 GHz (50 Ω) Screw-type coupling mechanism SMA series connectors Precision connectors 50 Ω impedance Frequency range: DC 18 GHz (50 Ω) Screw-type coupling mechanism Also with reverse polarity available TNC series connectors Available with 50 Ω and 75 Ω impedance Frequency range: DC 11 GHz (50 Ω) Screw-type coupling mechanism QMA series connectors 50 Ω impedance Frequency range: DC 18 GHz Snap-lock coupling mechanism QLF Standards-compliant (see QN series connectors 50 Ω impedance Frequency range: DC 11 GHz Snap-lock coupling mechanism QLF Standards-compliant (see 20 HUBER+SUHNER Industrial wireless communication

21 The direct route to the perfect cable assembly 1. Select Select the appropriate cable with the help of the «Product finder». 2. Configure Define the matching assembly with the help of the «RF assembly configurator». 3. Calculate Calculate the properties with the help of the «RF assembly calculator». HUBER+SUHNER Industrial wireless communication 21

22 Fiber optic assemblies HUBER+SUHNER can configure robust assemblies to meet customer requirements from our wide range of connectors and patch cables. Features Applications ODC assemblies Featuring robust ODC industrial connectors Protected end faces Safe installation blind mating Dust- and water-tight For harsh environmental conditions For connecting access points in buildings or outdoors Connecting control cabinets Rugged cable assemblies With all typical fiber types Standard connectors incl. SFF For harsh environmental conditions For connecting access points in buildings Connecting control cabinets Patch cables Simplex and duplex Standard connectors incl. SFF Connector types with automatic protective caps For connectivity between distribution modules and access points in distribution boxes For patching in distribution cabinets 22 HUBER+SUHNER Industrial wireless communication

23 Fiber optic cable systems A variety of cable systems can be configured to meet customer requirements. Preassembled cable systems offer the following advantages: Can be installed directly and quickly immediately operational No splicing or connector assembly required on site Cost savings thanks to simple and time-saving installation Little expertise required Features Applications SMARTLINE Multi-fiber patch cables with compact dimensions Protected transition to breakouts without divider Halogen free, low smoke and self-extinguishing cables LSFH For connecting control cabinets and distributor cabinets in buildings For connecting access points in buildings MASTERLINE classic Strong cable support Wide operating temperature range Dust- and water-tight pullingtube for protecting fan-out cables With standard connectors For connecting control cabinets in and between buildings For connecting distribution boxes and cabinets Cabling of communication networks MASTERLINE extreme Featuring robust ODC industrial connectors Safe installation blind mating Water- and dust-tight for use in harsh environmental conditions Hybrid version with power conductor available For connecting control cabinets in and between buildings For connecting distribution boxes For connecting access points on masts Customised cable systems Versatile choice of fiber and connector types Integrated with additional installation solutions Customer-specific packaging For connecting control cabinets in buildings For connecting access points HUBER+SUHNER Industrial wireless communication 23

24 Fiber optic fiber management systems Practical and compact modules support the professional fanning out of fibers to access and distribution points. Features Applications MDR module Space saving Fixing on DIN rail (35 mm) Splice/patch and patch variants Angled couplings for ideal patch cable connections Fiber fan-out in control cabinets and distribution boxes Wall-mounted housings Various sizes (OptiBox) For splicing and/or patching Multiple cable inputs and outputs High level of dust- and water-tightness Smart fiber management For connecting cable segments Branch point to access point For use in buildings and outdoors Cable termination boxes Housings for splicing and patching For 19" cabinets Easy installation Housing also available for housing fan-out cables of cable systems Fiber fan-out in control cabinets, distribution boxes and distribution cabinets Distribution boxes High fiber density Optimum access to fibers and connectors Modular equipment for future expansion For connecting and branching cable segments For connecting access points For use in buildings and outdoors Distribution cabinets Best possible access to fibers and connectors Splice and patch-only modules and splice/patch modules Modular units for gradual expansion Professional fiber and cable management Highest fiber density 19" and ETS cabinets (NGR) in widths between 300 and 1200 mm Fiber distribution in communication network nodes 24 HUBER+SUHNER Industrial wireless communication

25 Fiber optic cables HUBER+SUHNER manufactures a wide variety of halogen-free cables for countless applications. Our cables are tested for the highest mechanical, thermal and chemical resistance in accordance with requirements. Features Applications Cables for assemblies Simplex, duplex, breakout and riser cables For direct connector assembly LSFH types with excellent fire resistance High mechanical and thermal resistance For assemblies with ODC industrial connectors For robust cable assemblies For patch cables For multi-fiber connecting cables Industrial breakout cables For direct connector assembly Types for stationary applications with excellent fire resistance Flexible cables for mobile applications Available as a preassembled, ready-to-use cable system For demanding industrial applications (Industrial Ethernet) For connecting control cabinets For connecting access points in buildings Universal loose tube cables Glass- and steel-armoured cable types Excellent fire resistance Effective rodent protection RADOX cable types for the most demanding requirements Available as a preassembled, ready-to-use cable system For indoor and outdoor applications For connecting wall-mounted housings and distributors Installation in cable ducts and conduits Outdoor loose tube cables Glass- and steel-armoured cable types Excellent resistance in harsh environment Effective rodent protection Available as a preassembled, ready-to-use cable system For outdoor applications For connecting wall-mounted housings and distributors Installation in cable ducts and conduits HUBER+SUHNER Industrial wireless communication 25

26 HUBER+SUHNER AG Degersheimerstrasse Herisau Switzerland Phone Fax hubersuhner.com / HUBER+SUHNER is certified according to ISO 9001, ISO 14001, ISO/TS and IRIS. Waiver Fact and figures herein are for information only and do not represent any warranty of any kind.