AC Line EMI Suppression and RC Networks PHE820M Series Metallized Polyester Film, Class X2, 275 VAC. Applications

Transcription

1 AC Line EMI Suppression and RC Networks PHE820M Series Metallized Polyester Film, Class X2, 275 VAC Overview The PHE820M Series is constructed of series winding of metallized polyester encapsulated in self-extinguishing material meeting the requirements of UL 94 V 0. Applications Typical applications include worldwide use in electromagnetic interference suppression in all X2 and across-the-line applications. Benefits Approvals: ENEC, UL, cul Rated voltage: 275 VAC 50/60 Hz Capacitance range: µf Lead spacing: mm Capacitance tolerance: ±20%, ±10%, ±5% on request Climatic category: 40/100/56, IEC Tape and reel in accordance with IEC RoHS Compliant and lead-free terminations Operating temperature range of -40 C to +100 C 100% screening factory test at 2,150 VDC Legacy Part Number System PHE820 M B 5100 M R17 Series Rated Voltage (VAC) Lead Spacing (mm) Capacitance Code (pf) X2, Metallized Polyester M = 275 B = 15.0 D = 22.5 F = 27.5 R = 37.5 Digits 2 4 indicate the first three digits of the capacitance value. First digit indicates the total number of digits in the capacitance value Capacitance Tolerance J = ±5% K = ±10% M = ±20% Lead and Packaging Code See Ordering Options Table New KEMET Part Number System F 720 B D 103 M 275 A Capacitor Class F = Film Series Lead Spacing (mm) Size Code Capacitance Code (pf) X2, Metallized Polyester B = 15.0 D = 22.5 F = 27.5 R = 37.5 See Dimension Table First two digits indicate the two most significant digits of the capacitance value in picofarads. The third digit is the number of following zeros. Capacitance Tolerance J = ±5% K = ±10% M = ±20% Rated Voltage (VAC) Lead and Packaging Code 275 = 275 See Ordering Options Table One world. One KEMET KEMET Electronics Corporation P.O. Box 5928 Greenville, SC (864) F3009_PHE820M_X2_275 7/19/2012 1

2 Ordering Options Table Lead Spacing Nominal (mm) 15 Native 15 formed to 7.5 Type of Leads and Packaging Standard Lead and Packaging Options Lead Length (mm) KEMET Lead and Packaging Code Legacy Lead and Packaging Code Bulk (Bag) Short Leads 6 +0/-1 C R06 Bulk (Bag) Long Leads 17 +0/-1 A R17 Other Lead and Packaging Options Bulk (Bag) Max Length Leads 30 +5/-0 ALW0L R30 Tape & Reel (Standard Reel) H 0 = /-0.5 L R17T0 Tape & Reel (Large Reel) H 0 = /-0.5 P R17T1 Ammo Pack H 0 = /-0.5 XLAF1 R25XA Tape & Reel (Standard Reel) H 0 = /-0.5 XLTF1 R25X2 Standard Lead and Packaging Options Bulk (Tray) Short Leads 6 +0/-1 C R06L2 (1) 22.5 Other Lead and Packaging Options Tape & Reel (Standard Reel) H 0 = /-0.5 L R17T0 Tape & Reel (Large Reel) H 0 = /-0.5 P R17T1 Pizza Pack 6 +0/-1 Z R06L2 (1) Standard Lead and Packaging Options 27.5 Bulk (Tray) Short Leads 6 +0/-1 C R06L2 (1) Other Lead and Packaging Options Tape & Reel (Large Reel) H 0 = /-0.5 P R17T1 Pizza Pack 6 +0/-1 Z R06L2 (1) Standard Lead and Packaging Options 37.5 Bulk (Tray) Short Leads 6 +0/-1 C R06L2 (1) Other Lead and Packaging Options (1) Please specify Bulk (Tray) or Pizza Packaging. Pizza Pack 6 +0/-1 Z R06L2 (1) KEMET Electronics Corporation P.O. Box 5928 Greenville, SC (864) F3009_PHE820M_X2_275 7/19/2012 2

3 Dimensions Millimeters L B H 0.5 d LL p KEMET Size Code Legacy Size Code p B H L d Nominal Tolerance Nominal Tolerance Nominal Tolerance Nominal Tolerance Nominal Tolerance BD B / Maximum 10.5 Maximum 18.0 Maximum 0.8 +/-0.05 BE B / Maximum 12.5 Maximum 18.0 Maximum 0.8 +/-0.05 BL B / Maximum 14.5 Maximum 18.0 Maximum 0.8 +/-0.05 BJ B / Maximum 12.5 Maximum 18.0 Maximum 0.8 +/-0.05 BQ B / Maximum 16.0 Maximum 18.0 Maximum 0.8 +/-0.05 DD D / Maximum 14.5 Maximum 26.0 Maximum 0.8 +/-0.05 DH D / Maximum 16.0 Maximum 26.0 Maximum 0.8 +/-0.05 DM D / Maximum 18.5 Maximum 26.0 Maximum 0.8 +/-0.05 DT D / Maximum 21.5 Maximum 26.0 Maximum 0.8 +/-0.05 FG F / Maximum 22.5 Maximum 31.5 Maximum 0.8 +/-0.05 FM F / Maximum 24.5 Maximum 31.5 Maximum 0.8 +/-0.05 FR F / Maximum 28.0 Maximum 31.5 Maximum 0.8 +/-0.05 RK R / Maximum 32.0 Maximum 41.0 Maximum 1 +/-0.05 RM R / Maximum 36.0 Maximum 41.0 Maximum 1 +/-0.05 Note: See Ordering Options Table for lead length (LL) options. KEMET Electronics Corporation P.O. Box 5928 Greenville, SC (864) F3009_PHE820M_X2_275 7/19/2012 3

4 Performance Characteristics Rated Voltage 275 VAC 50/60 Hz Capacitance Range µf Capacitance Tolerance Temperature Range ±20%, ±10%, ±5% on request -40ºC to +100 C Climatic Category 40/100/56 Approvals Dissipation Factor Test Voltage Between Terminals ENEC, UL, cul Maximum Values at +23 C 1 khz 1.0% The 100% screening factory test is carried out at 2,150 VDC. The voltage level is selected to meet the requirements in applicable equipment standards. All electrical characteristics are checked after the test. It is not permitted to repeat this test as there is a risk to damage the capacitor. KEMET is not liable in such case for any failures. Minimum Values Between Terminals Insulation Resistance C 0.33 µf 30,000 MΩ C > 0.33 µf 10,000 MΩ µf In DC Applications Recommended voltage 760 VDC Environmental Test Data Test IEC Publication Procedure Endurance EN/IEC x V R VAC 50 Hz, once every hour increase to 1,000 VAC for 0.1 second, 1,000 hours at upper rated temperature Vibration IEC Test Fc 3 directions at 2 hours each Hz at 0.75 mm or 98 m/s 2 Bump IEC Test Eb 1,000 bumps at 390 m/s 2 Change of Temperature IEC Test Na Upper and lower rated temperature 5 cycles Active Flammability IEC V R + 20 surge pulses at 2.5 kv (pulse every 5 seconds) Passive Flammability IEC IEC , IEC Needle Flame Test Damp Heat Steady State IEC Test Cab +40 C and 93% RH, 56 days KEMET Electronics Corporation P.O. Box 5928 Greenville, SC (864) F3009_PHE820M_X2_275 7/19/2012 4

5 Approvals Mark Specification File Number EN/IEC SE/ B UL 1414 (up to 1 μf, 85 C, 250 VAC) CSA C22.2 No. 1 (up to 1 μf, 85 C, 250 VAC) UL 1283 (310 VAC) CSA C22.2 No. 8 (310 VAC) E73869 E73869 E E Environmental Compliance All KEMET EMI capacitors are RoHS Compliant. Table 1 Ratings & Part Number Reference Cap Value (µf) Size Code (New/Legacy) Max Dimensions in mm Lead Spacing (p) fo (MHz) dv/dt (V/µs) New KEMET Part Number Legacy Part Number B H L BD/B F720BD103(1)275(2) PHE820MB5100(1)(2) BD/B F720BD153(1)275(2) PHE820MB5150(1)(2) BD/B F720BD223(1)275(2) PHE820MB5220(1)(2) BE/B F720BE333(1)275(2) PHE820MB5330(1)(2) BJ/B F720BJ473(1)275(2) PHE820MB5470(1)(2) BL/B F720BL683(1)275(2) PHE820MB5680(1)(2) 0.10 BQ/B F720BQ104(1)275(2) PHE820MB6100(1)(2) 0.10 DD/D F720DD104(1)275(2) PHE820MD6100(1)(2) 0.15 DH/D F720DH154(1)275(2) PHE820MD6150(1)(2) 0.22 DM/D F720DM224(1)275(2) PHE820MD6220(1)(2) 0.33 DT/D F720DT334(1)275(2) PHE820MD6330(1)(2) 0.47 FG/F F720FG474(1)275(2) PHE820MF6470(1)(2) 0.68 FM/F F720FM684(1)275(2) PHE820MF6680(1)(2) 1.0 FR/F F720FR105(1)275(2) PHE820MF7100(1)(2) 1.5 RK/R F720RK155(1)275(2) PHE820MR7150(1)(2) 2.2 RM/R F720RM225(1)275(2) PHE820MR7220(1)(2) Cap Value (µf) Size Code (New/Legacy) B (mm) H (mm) L (mm) Lead Spacing (p) fo (MHz) (1) M = ±20%, K = ±10%, J = ±5% on request. (2) Insert ordering code for lead type and packaging. See Ordering Options Table for available options. dv/dt (V/µs) New KEMET Part Number Legacy Part Number KEMET Electronics Corporation P.O. Box 5928 Greenville, SC (864) F3009_PHE820M_X2_275 7/19/2012 5

6 Soldering Process The implementation of the RoHS Directive has required the use of SnAuCu (SAC) or SnCu alloys as primary solder. These alloys require a higher liquidus temperature (217ºC 221ºC) as compared to SnPb eutectic alloy (183ºC). Due to the higher pre-heat and wave temperatures, the heat stress to components has increased considerably. Polypropylene capacitors are especially sensitive to soldering temperature due to the relatively low melting point of polypropylene material (160ºC 170ºC). As a result, wave soldering can be destructive, especially to mechanically small polypropylene capacitors with lead spacings of 5 10 mm. For more information, please refer to KEMET's Recommended Soldering Profiles or contact a KEMET representative. IEC Publication Edition 2 may also be consulted for general guidelines. Marking KEMET s logo Series Capacitance Capacitance tolerance Rated voltage Capacitor class Approval marks Manufacturing date code IEC climatic category Passive flammability class Manufacturing plant KEMET Electronics Corporation P.O. Box 5928 Greenville, SC (864) F3009_PHE820M_X2_275 7/19/2012 6

7 Packaging Quantities KEMET Size Code BD Legacy Size Code B04 Lead Spacing Thickness (mm) Height (mm) Length (mm) Bulk Short Leads Bulk Long Leads Standard Reel ø 360 mm Large Reel ø 500 mm Pizza Standard Reel Formed Ammo Formed BE B BL B BJ B BQ B BM B BV B BG B BY B BU B DD D DH D DM D DT D DF D DR D DY D DW D FK F FE F FG F FM F FR F FS F FV F FH F FT F FQ F RK R RM R RH R RF R RP R RS R KEMET Electronics Corporation P.O. Box 5928 Greenville, SC (864) F3009_PHE820M_X2_275 7/19/2012 7

8 Lead Taping & Packaging (IEC ) Lead Spacing 5 mm Lead Spacing 7.5 mm 0 0 Lead Spacing 10 15mm Lead Spacing mm 0 0 Formed Leads from 10 and 15 mm to 7.5 mm 0 Taping Specification Dimensions in mm Standard IEC Lead spacing +6/-0.1 F Formed F Carrier tape width +/-0.5 W /-0.5 Hold-down tape width +/-0.3 W Position of sprocket hole +/-0.5 W /-0.5 Distance between tapes Maximum W Sprocket hole diameter +/-0.2 D Feed hole lead spacing +/-0.3 P 0 (1) (4) Distance lead feed hole +/-0.7 P P 1 Deviation tape plane Maximum p Lateral deviation Maximum h Total thickness +/-0.2 t MAX 0.9 MAX 0.9 MAX Sprocket hole/cap body Nominal H 0 (2) / / / / / / / /-0 Sprocket hole/top of cap body Maximum H 1 (3) MAX (1) Maximum cumulative feed hole error, 1 mm per 20 parts. (2) 16.5 mm available on request. (3) Depending on case size. (4) 15 mm available on request. KEMET Electronics Corporation P.O. Box 5928 Greenville, SC (864) F3009_PHE820M_X2_275 7/19/2012 8

9 Lead Taping & Packaging (IEC ) cont'd Ammo Specifications Series Dimensions (mm) H W T R4x, R4x+R, R7x, RSB F5A, F5B, F5D H F6xx, F8xx PHExxx, PMExxx, PMRxxx, SMR & PFR T W Reel Specifications Series Dimensions (mm) D H W R4x, R4x+R, R7x, RSB F5A, F5B, F5D F6xx, F8xx PHExxx, PMExxx, PMRxxx, SMR & PFR (Max) (Max) D H Manufacturing Date Code (IEC 60062) W Y = Year, Z = Month Year Code Month Code 2000 M January N February P March R April S May T June U July V August W September X October O 2010 A November N 2011 B December D 2012 C 2013 D 2014 E 2015 F 2016 H 2017 J 2018 K 2019 L 2020 M KEMET Electronics Corporation P.O. Box 5928 Greenville, SC (864) F3009_PHE820M_X2_275 7/19/2012 9

10 KEMET Corporation World Headquarters 2835 KEMET Way Simpsonville, SC Mailing Address: P.O. Box 5928 Greenville, SC Tel: Fax: Corporate Offices Fort Lauderdale, FL Tel: North America Southeast Lake Mary, FL Tel: Northeast Wilmington, MA Tel: West Chester, PA Tel: Central Novi, MI Tel: Carmel, IN Tel: West Milpitas, CA Tel: Mexico Zapopan, Jalisco Tel: Europe Southern Europe Geneva, Switzerland Tel: Paris, France Tel: Sasso Marconi, Italy Tel: Milan, Italy Tel: Rome, Italy Tel: Madrid, Spain Tel: Central Europe Landsberg, Germany Tel: Dortmund, Germany Tel: Kwidzyn, Poland Tel: Northern Europe Bishop s Stortford, United Kingdom Tel: Weymouth, United Kingdom Tel: Coatbridge, Scotland Tel: Färjestaden, Sweden Tel: Espoo, Finland Tel: Asia Northeast Asia Hong Kong Tel: Shenzhen, China Tel: Beijing, China Tel: Shanghai, China Tel: Taipei, Taiwan Tel: Southeast Asia Singapore Tel: Penang, Malaysia Tel: Bangalore, India Tel: Note: KEMET reserves the right to modify minor details of internal and external construction at any time in the interest of product improvement. KEMET does not assume any responsibility for infringement that might result from the use of KEMET Capacitors in potential circuit designs. KEMET is a registered trademark of KEMET Electronics Corporation. KEMET Electronics Corporation P.O. Box 5928 Greenville, SC (864) F3009_PHE820M_X2_275 7/19/

11 Other KEMET Resources Tools Resource Configure A Part: CapEdge SPICE & FIT Software Search Our FAQs: KnowledgeEdge Location Product Information Resource Products Technical Resources (Including Soldering Techniques) RoHS Statement Quality Documents Location Product Request Resource Sample Request Engineering Kit Request Location Contact Resource Website Contact Us Investor Relations Call Us Twitter Location MyKEMET Disclaimer All product specifications, statements, information and data (collectively, the Information ) are subject to change without notice. All Information given herein is believed to be accurate and reliable, but is presented without guarantee, warranty, or responsibility of any kind, expressed or implied. Statements of suitability for certain applications are based on our knowledge of typical operating conditions for such applications, but are not intended to constitute and we specifically disclaim any warranty concerning suitability for a specific customer application or use. This Information is intended for use only by customers who have the requisite experience and capability to determine the correct products for their application. Any technical advice inferred from this Information or otherwise provided by us with reference to the use of our products is given gratis, and we assume no obligation or liability for the advice given or results obtained. Although we design and manufacture our products to the most stringent quality and safety standards, given the current state of the art, isolated component failures may still occur. Accordingly, customer applications which require a high degree of reliability or safety should employ suitable designs or other safeguards (such as installation of protective circuitry or redundancies) in order to ensure that the failure of an electrical component does not result in a risk of personal injury or property damage. Although all product-related warnings, cautions and notes must be observed, the customer should not assume that all safety measures are indicated or that other measures may not be required. KEMET Electronics Corporation P.O. Box 5928 Greenville, SC (864) F3009_PHE820M_X2_275 7/19/

12 KEMET Electronics Corporation P.O. Box 5928 Greenville, SC (864) F3009_PHE820M_X2_275 7/19/