Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK

Size: px
Start display at page:

Download "Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK"

Transcription

1 Schedule of ccreditation United Kingdom ccreditation Service ccredited to Parkburn Court Burnbank Hamilton Scotland ML3 0QQ Contact: Mr P Greenshields Tel: +44 (0) Fax: +44 (0) hamilton@cuthbertsonlaird.co.uk Website: Laboratory locations: Calibration performed by the Organisations at the locations specified below s covered by the organisation and their relevant activities details ctivity code ddress Parkburn Court Burnbank Hamilton Scotland ML3 0QQ Local contact Mr P Greenshields Dimensional and Electrical Site activities performed away from the locations listed above: details ctivity code t customers premises Dimensional B ssessment Manager: PB3 Page 1 of 7

2 Schedule of ccreditation United Kingdom ccreditation Service ccredited to DETIL OF CCREDITTION RNGE IN MILLIMETRES ND UNCERTINTY IN MICROMETRES UNLESS OTHERWISE STTED LENGTH NOTES Plain Plug Gauges (Parallel) Length Gauges, Flat and Spherical Ended (excluding Length Bars) NGLE 1 to 50 diameter 50 to to to 300 Squares Blade Type BS 939: to to 450 MESURING INSTRUMENTS ND MCHINES on diameter ll linear calibrations may be given in inch units. 2 The uncertainty 25 to (8.0 x length in m) quoted is for the departure from flatness, straightness, parallelism or squareness, ie the distance separating the two parallel planes which just enclose the surface under consideration. 3.0 on squareness 5.0 See Note 2 Micrometers External Internal Depth BS 870: to 1000 BS 959: to 900 BS 6468: to 300 Heads: 2.0 between any two points Setting and extension rods: (8.0 x length in m) Vernier gauges Caliper BS 887: to 1000 Overall performance 10 + (30 x length in m) Height ISO13225:2012 and BS 1643: to 1000 Overall performance 10 + (10 x length in m) Depth BS 6365: to 600 Overall performance 10 + (30 x length in m) ssessment Manager: PB3 Page 2 of 7

3 Schedule of ccreditation United Kingdom ccreditation Service ccredited to RNGE IN MILLIMETRES ND UNCERTINTY IN MICROMETRES UNLESS OTHERWISE STTED MESURING INSTRUMENTS ND MCHINES (cont d) Dial Gauges and Dial Test Indicators BS 907:2008 and BS 2795: to Surface Plates Granite Cast Iron BS 817:2008 and above 160 x 100 to 4000 x (0.80 x diagonal in m) See Note 2 & B Feeler Gauges BS 957: to Spirit Levels BS 3509:1962 and BS 958: seconds of arc to 60 minutes of arc nominal sensitivity Mean sensitivity 10% of nominal Minimum of 0.50 seconds of arc ELECTRICL RESISTNCE ppm (Spot Values) ppm 1 k 8.0 ppm 10 k 8.8 ppm 100 k 9.1 ppm 1 M 24 ppm 10 M 110 ppm 100 M 440 ppm 1 G 0.40 % 10 G 0.59 % 100 G 2.0 % 1 T 1.4 % 0 to µ 10 to ppm 100 to 1 k 9.0 ppm 1 k to 10 k 10 ppm 10 k to 100 k 10 ppm 100 k to 1 M 29 ppm 1 M to 10 M 130 ppm 10 M to 100 M 440 ppm 100 M to 1 G 0.40 % DC VOLTGE Spot values 100 mv 11 ppm 1 V 38 ppm 10 V 37 ppm 100 V 35 ppm 1000 V 36 ppm ssessment Manager: PB3 Page 3 of 7

4 Schedule of ccreditation United Kingdom ccreditation Service ccredited to DC VOLTGE (cont;d) s 0 mv to 100 mv 4.5 V 100 mv to 1 V 38 ppm 1 V to 10 V 37 ppm 10 V to 100 V 35 ppm 100 V to 1000 V 36 ppm 1 kv to 20 kv 1.6 % 20 kv to 38 kv 2.6 % DC CURRENT Spot Values 1 45 ppm ppm ppm 1 m 55 ppm 10 m 51 ppm 100 m 60 ppm 1 87 ppm DC CURRENT (cont d) s 0 to p 1 to ppm 10 to ppm 100 to 1 m 67 ppm 1 m to 10 m 65 ppm 10 m to 100 m 72 ppm 100 m to ppm 1 to ppm ) Generate 2.2 to ppm ) only 11 to Simulated current using a 200 to multi turn coil 550 to C VOLTGE Spot Values 10 mv 100 mv 190 ppm 73 ppm 40 Hz to 1 khz 1 V 64 ppm 10 V 65 ppm 100 V 160 ppm 700 V 310 ppm The product of I*V may be reported as V, the uncertainty will be the sum of the 2 associated uncertainties. 1 V 620 ppm 10 V 620 ppm 100 V 930 ppm ssessment Manager: PB3 Page 4 of 7

5 Schedule of ccreditation United Kingdom ccreditation Service ccredited to C VOLTGE Values 1 mv to 10 mv 40 Hz to 1 khz % 10 mv to 100 mv 40 Hz to 1 khz % 100 mv to 1 V 40 Hz to 1 khz % 1 khz to 100 khz % 1 V to 10 V 40 Hz to 1 khz % 1 khz to 100 khz % 10 V to 100 V 40 Hz to 1 khz % 1 khz to 100 khz 0.10 % 100 V to 700 V 40 Hz to 1 khz % C VOLTGE Values continued 700 V to 1 kv40 Hz to 1 khz 0.23 % Generate only t 50 Hz 1 kv to 20 kv 1.8 % 20 kv to 28 kv 2.7 % C CURRENT Spot Values 100 µ % 1 m % 10 m % 100 m % % C CURRENT Values 5 µ to 100 µ 100 µ to 1 m 1 m to 10 m 10 m to 100 m 100 m to % 0.16 % 0.16 % 0.16 % 0.18 % 1 to to to to % 0.50 % ) Generate ) only Simulated current using a multi turn coil ssessment Manager: PB3 Page 5 of 7

6 Schedule of ccreditation United Kingdom ccreditation Service ccredited to FREQUENCY 1 Hz to 1 MHz 1 MHz to 2.1 khz 21 in mhz May be reported as 21 in 10 8 events per unit time, such as RPM Elapsed time 0 ms to 390 ms 391 ms to 100 s 1.0 ms 8.0 ms 17 th Edition type equipment Earth Loop m m m m m 1 10 m 5 30 m m m 1 k 5.8 m RCD testers Trip current (all at 50 Hz) 3 m to 10 m 620 µ Up to 5 seconds 10 m to 100 m 5.8 m 100 m to 1 59 m 1 to m Trip Time ll at 30 m 50 Hz 10 ms to 390 ms 1.0 ms Suitable for RCD trip times 390 ms to 1 s 8.1 ms Earth bonding current PT Testers Earth bond current 50Hz 0.2 m to 7.7 m 15 µ 100 m 8.0 m 100 m to m 10 to m Earth Bond resistance Nominal values 0.05 Ω 7.5 mω 0.1 Ω 7.5 mω 0.22 Ω 7.6 mω 0.33 Ω 7.7 mω 0.5 Ω 8.0 mω 1 Ω 9.5 mω 5 Ω 30 mω 10 Ω 58 mω 100 Ω 580 mω 1 kω 5.8 Ω ssessment Manager: PB3 Page 6 of 7

7 Schedule of ccreditation United Kingdom ccreditation Service ccredited to FREQUENCY (cont d) Insualtion resistance Nominal source values 100 kω 12 kω 500 kω 12 kω 1 MΩ 12 kω 5 MΩ 21 kω 10 MΩ 37 kω 20 MΩ 72 kω 50 MΩ 180 kω 100 MΩ 350 kω Load Tests 3 kv 2.5 % Note, this sum of Current and Voltage uncertainties for volt-amperes. Flash tests 700 V to Hz 1.5 % V ELECTRICL SIMULTION mbient in support of temperature simulation only 17 C to 23 C 0.11 C Temperature simulators and indicators, calibration by electrical simulation Resistance thermometer (Pt 100) - 18 C to C C Base metal thermocouples C to -100 C C Excluding cold junction 0 C to C C Excluding cold junction C to -100 C 0.49 C Including cold junction -100 C to C 0.38 C Including cold junction END ssessment Manager: PB3 Page 7 of 7

Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK

Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK Schedule of ccreditation United Kingdom ccreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK Issue No: 029 Issue date: 05 pril 2017 ccredited to JLR Calibration Centre Building

More information

Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames TW18 3HR

Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames TW18 3HR Schedule of ccreditation United Kingdom ccreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames TW18 3HR (Trading as Opus Metrology) ccredited to 15 Maylan Road Earlstrees Industrial Estate

More information

Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK

Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, Unit 8 The Centre Holywell Business Park Northfield Road Southam Warwickshire CV47 0FP Contact: Mr N Morgan Tel: +44 (0)1926 812066 Fax: +44

More information

Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK

Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK Metrology Division Contact: Mr K Pallett Calibration House Tel: +44 (0)1332 867 700 Castings Road E-Mail: sales@comech.co.uk Derby Website:

More information

Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK

Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK Issue No: 050 Issue date: 11 September 2017 0310 DPN 175 Lammas Road Corby Northamptonshire NN17 5JF Contact: Mr S MacLeod Tel: +44 (0)1536

More information

Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK

Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK 2 ine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK The Calibration House Halesfield 7 Telford Shropshire TF7 4QL Contact: Mr R A Jones Tel: +44 (0) 1952 681 500 Fax: +44 (0) 118 927 6855 E-Mail:

More information

Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK

Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK CET Structures Ltd. trading as CET Calibration M1 Commerce Park Markham Lane Duckmanton Chesterfield S44 5HS Contact: Mr Chris Locke Tel: +44 (0)1246 828318 Fax: +44 (0)1246 828319 E-Mail: chris.locke@cetcalibration.com

More information

Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK

Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK Avionic and Metrology Centre Unit G1/2 Treforest Industrial Estate Pontypridd CF37 5YL Contact: Mr P Ashurst Tel: +44 (0)1443 849970 Fax:

More information

Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK

Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK Southern Calibration oratories Limited Issue No: 038 Issue date: 26 January 2018 Unit 7 Solent Industrial Estate Hedge End Southampton SO30

More information

Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK

Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK Unit 3, Watt House Innovation Centre Pensnett Estate Kingswinford West Midlands DY6 7YD Contact: Mr A P Walker Tel: +44 (0)1384 401132 Fax: +44 (0)1384 400754 E-Mail: mail@quasartronics.com Website: www.quasartronics.com

More information

Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK

Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK 2 Pine Trees, hertsey Lane, Staines-upon-Thames, TW18 3HR, UK ISO/IE 17025:2005 Unit 3 24-26 Boulton Road Stevenage Hertfordshire SG1 4QX ontact: Mr G J Wilson Tel: +44 (0) 1438 900080 Fax: +44 (0) 1438

More information

Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK

Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK Leigh Commerce Park Greenfold Way Leigh Greater Manchester WN7 3XJ Contact: Mr K Angus, Mr D Moore, Ms S Ward Tel: + 44 (0)125 253 3334 E-Mail:

More information

Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK

Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK DC RESISTANCE 2 Ellerbeck Way Stokesley North Yorkshire TS9 5JZ Contact: Mr A Robson Tel: +44 (0)1642-718900 Fax: +44 (0)1642-718909 E-Mail:

More information

Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK

Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, Unit 8 The Centre Holywell Business Park Northfield Road Southam Warwickshire CV47 0FP Contact: Mr N Morgan Tel: +44 (0)1926 812066 Fax: +44

More information

Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK

Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK 1 Wilson Street Contact: Mr Ibrahim Ibrahim Thornaby Tel: +44 (0) 1642 626148 Stockton-On-Tees Fax: +44 (0) 870 143 1869 TS17 7AR E-Mail: ibrahim@calibrate.co.uk United Kingdom Website: www.calibrate.co.uk

More information

Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK

Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK Bankhead Industrial Estate Contact: Miss Alexis Ross Bankhead Avenue Tel: +44 (0)1224 710033 Bucksburn Fax: +44 (0)1224 710099 Aberdeen E-Mail:

More information

Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK

Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK Unit 6 Contact: Mr J Puttock Spectrum Business Estate Tel: +44 (0)1622 690187 Bircholt Road Fax: +44 (0)1622 678827 Parkwood E-Mail: jonputtock@aol.com

More information

Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK

Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK 72 Manchester Road Kearsley Bolton BL4 8NZ Contact: Mr A Leonard Tel: +44 (0) 1204 571499 Fax: +44 (0) 1204 571734 E-Mail: enquiries@airflowmeasurements.com Website: www.airflowmeasurements.com AIR VELOCITY

More information

Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK

Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK 2 ine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK Unit 1 Cabot Business Village Holyrood Close oole Dorset BH17 7BA Contact: Mr Matthew Suter Tel: +44 (0)1202 658333 Fax: +44 (0)1202 659966

More information

Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK

Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK Laboratory locations: 19 Iris Road Rogerstone Newport NP10 9LE Contact: Mr R Bale Tel: +44 (0)1633 897225 Fax: +44 (0)1633 897225 E-Mail:

More information

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z540-1-1994 METROCAL, INC 3631 44 th Street SE, Suite B Kentwood, MI 49512 Kent Anderson Phone: 616 698 3124 CALIBRATION Valid To: September 30,

More information

CALIBRATION & MEASUREMENT CAPABILITY 1 (CMC) (±) 0.5 C 0.05 C C 0.37 C 0.15 C 0.86 C C %Rh 0.95 %Rh 1.2 %Rh 0.085% IR 0.

CALIBRATION & MEASUREMENT CAPABILITY 1 (CMC) (±) 0.5 C 0.05 C C 0.37 C 0.15 C 0.86 C C %Rh 0.95 %Rh 1.2 %Rh 0.085% IR 0. IAS Accreditation Number CL-159 Accredited Entity Address P.O. Box 31862 Al Khobar 31952 Kingdom of Saudi Arabia Contact Name Arnold Arevalo Quality Manager Telephone +966-13-8571899 Effective Date of

More information

CERTIFICATE OF ACCREDITATION ISO/IEC 17025:2005 ANSI/NCSL Z (R2002)

CERTIFICATE OF ACCREDITATION ISO/IEC 17025:2005 ANSI/NCSL Z (R2002) CERTIFICATE OF ACCREDITATION ANSI-ASQ National Accreditation Board 500 Montgomery Street, Suite 625, Alexandria, VA 22314, 877-344-3044 This is to certify that McCune s Instrument, Inc. 108 North Lee Street

More information

Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK

Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK PRESSURE Hydraulic Pressure (Gauge) Hewett Road Gapton Hall Industrial Estate Great Yarmouth Norfolk NR31 0NN Contact: Mr J Gunn Tel: +44

More information

CERTIFICATE OF ACCREDITATION

CERTIFICATE OF ACCREDITATION CERTIFICATE OF ACCREDITATION ANSI-ASQ National Accreditation Board 500 Montgomery Street, Suite 625, Alexandria, VA 22314, 877-344-3044 This is to certify that Productivity Quality, Inc./Advanced Inspection

More information

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z540-1-1994 ENI Labs 3120 Independence Dr. Fort Wayne, IN 46808 Andrew Burd Phone: 260 471 6775 CALIBRATION Valid To: April 30, 2018 Certificate

More information

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z540-1-1994 DIGITAL MEASUREMENT METROLOGY INC. (A TRESCAL COMPANY) 26 Automatic Road, Unit 4 Brampton, Ontario, CANADA L6S 5N7 Nana Mantey Phone:

More information

Mechanical 0.3% 1 to 9999 RPM 1% of reading Tachometer. Up to 24 hours/0.01 Sec 1 Sec Master Stopwatch and Manual Comparison Chemical

Mechanical 0.3% 1 to 9999 RPM 1% of reading Tachometer. Up to 24 hours/0.01 Sec 1 Sec Master Stopwatch and Manual Comparison Chemical IAS Accreditation Number Accredited Entity Address CL-138 & Equipment Service Centre Main Office: Industrial Area, Street No.2, Opp. Bosch Car Service, Po. Box 40570, Doha Qatar Nuclear Gauge Calibration:

More information

Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK

Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK Measurement House Contact: Mr David Gray Kingsway Tel: +44 (0)1792 588722 Fforestfach Fax: +44 (0)1792 582624 Swansea E-Mail: mail@haven.co.uk

More information

CERTIFICATE OF ACCREDITATION

CERTIFICATE OF ACCREDITATION CERTIFICATE OF ACCREDITATION ANSI-ASQ National Accreditation Board 500 Montgomery Street, Suite 625, Alexandria, VA 22314, 877-344-3044 This is to certify that Cal Tec Process Management, LLC 1400 Grange

More information

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z540-1-1994 ALDINGER COMPANY 8023 Interstate 30 Little Rock, AR 72209 Dustin R. Detten Phone: 214 638 1808 CALIBRATION Valid To: September 30, 2018

More information

Certificate of Accreditation

Certificate of Accreditation PERRY JOHNSON LABORATORY ACCREDITATION, INC. Certificate of Accreditation has assessed the Laboratory of: Rays Precision Calibration, Inc 881-3 Nandino Blvd., Lexington, KY 40511 (Hereinafter called the

More information

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z540-1-1994 WESTERN STATES CALIBRATION 105 West 2950 South Salt Lake City, UT 84115-3433 Lon Miles Phone: 801 466 1700 CALIBRATION Valid To: February

More information

Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK

Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK code Location code Customers Sites 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK Calibration Centre Bolkiah Garrison BB3510 Negara Brunei Darussalam Contact: Mr Yussof Taha Tel: +673-2-386475

More information

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005. J. A. KING & COMPANY, LLC South Lakes Drive Charlotte, NC Connie Foster Phone:

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005. J. A. KING & COMPANY, LLC South Lakes Drive Charlotte, NC Connie Foster Phone: SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 J. A. KING & COMPANY, LLC 14200 South Lakes Drive Charlotte, NC 28273 Connie Foster Phone: 800 327 7727 CALIBRATION Valid To: August 31, 2019 Certificate Number:

More information

Up to 1600 kg/1 kg. Precision Balance - Make: Kern, Model: DS 36K0.5 Mechanical Analytical Balances (On site

Up to 1600 kg/1 kg. Precision Balance - Make: Kern, Model: DS 36K0.5 Mechanical Analytical Balances (On site IAS Accreditation Number CL-161 Accredited Entity Address Gate 1006, Villa: 2, Road 3221 Mahooz 332, P.O. Box 728 Kingdom of Bahrain Contact Name K. T. Noushad, General Manager Telephone +973 17720117

More information

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 FUGRO SUHAIMI LIMITED Calibration Laboratory Riyadh Building No.124, Najah Street Ishbiliyah, District Riyadh, Kingdom of Saudi Arabia 31451 Mohammed B. Hameed

More information

Certificate of Accreditation

Certificate of Accreditation PERRY JOHNSON LABORATORY ACCREDITATION, INC. Certificate of Accreditation Perry Johnson Laboratory Accreditation, Inc. has assessed the Laboratory of: Acceso III No. 16 A Nave 10, Parque Industrial Benito

More information

110 to 330 Ω/ Ω 20 mω 330 to 1.1 kω/0.001 Ω 20 mω. 110 to 330 kω/0.1 Ω 12.8 Ω. 33 to 110 kω/0.1 Ω 4.1 Ω

110 to 330 Ω/ Ω 20 mω 330 to 1.1 kω/0.001 Ω 20 mω. 110 to 330 kω/0.1 Ω 12.8 Ω. 33 to 110 kω/0.1 Ω 4.1 Ω IAS Accreditation Number Accredited Entity Address CL-178 Qatar Calibration Services WLL, (QCAL) QP West Services Area Ghuwairiya, St IR #1 Ras Laffan Doha, PO Box 16069, State of Qatar Shreenivasa T R,

More information

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z & Z

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z & Z SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z540-1-1994 & Z540.3-2006 INSPEC, INC. 7282 Haggerty Rd Canton, MI 48187 Dale Robenault Phone: 734 451 8740 CALIBRATION Valid To: September 30,

More information

Hellenic Accreditation System. Annex F2/15 to the Certificate No SCOPE of ACCREDITATION

Hellenic Accreditation System. Annex F2/15 to the Certificate No SCOPE of ACCREDITATION Hellenic Accreditation System Annex F2/15 to the Certificate No. 345-3 SCOPE of ACCREDITATION of the Calibration laboratory of ALGOSYSTEMS S.A. Temperature/ Temperature block calibrators Temperature measurements

More information

Scope of Accreditation For Southwest Metrology, Inc. Calibration

Scope of Accreditation For Southwest Metrology, Inc. Calibration Scope of Accreditation For Southwest Metrology, Inc. 7045 N Camino Martin Tucson, AZ 85741 Dan Beard 520-744-8510 In recognition of a successful assessment to ISO/IEC 17025:2005 and ANSI/NCSL Z540-1: 1994

More information

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z540-1-1994 CAL-TEC, INC. 114 Thruway Park Road Broussard, LA 70518 Chris Grevemberg Phone: 337 839 0450 Email: lab@caltecinc.com CALIBRATION Valid

More information

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z540-1-1994 J. A. KING & COMPANY, LLC 14200 South Lakes Drive Charlotte, NC 28273 Connie Foster Phone: 800 327 7727 CALIBRATION Valid To: August

More information

CERTIFICATE OF ACCREDITATION ISO/IEC 17025:2005 ANSI/NCSL Z (R2002)

CERTIFICATE OF ACCREDITATION ISO/IEC 17025:2005 ANSI/NCSL Z (R2002) CERTIFICATE OF ACCREDITATION ANSI-ASQ National Accreditation Board 500 Montgomery Street, Suite 625, Alexandria, VA 22314, 877-344-3044 This is to certify that Advanced Technical Services NW, Inc. 8612

More information

7051Plus / 5051Plus. Extended Specification

7051Plus / 5051Plus. Extended Specification 7051Plus / 5051Plus Extended Specification V1.1 Time Electronics, Botany Industrial Estate,Tonbridge, Kent, TN9 1RH England Tel: 44 (0)1732 355993 Fax: 44 (0) 1732 770312. E-mail: mail@timeelectronics.co.uk

More information

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z540-1-1994 GRAND RAPIDS METROLOGY 4215 Stafford Avenue, SW Grand Rapids, MI 49548 Dave Warner Phone: 616 538 7080 CALIBRATION Valid To: October

More information

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z540-1-1994 GRAND RAPIDS METROLOGY 4215 Stafford Avenue, SW Grand Rapids, MI 49548 Dave Warner Phone: 616 538 7080 CALIBRATION Valid To: October

More information

CERTIFICATE OF ACCREDITATION

CERTIFICATE OF ACCREDITATION CERTIFICATE OF ACCREDITATION ANSI National Accreditation Board 11617 Coldwater Road, Fort Wayne, IN 46845 USA This is to certify that Productivity Quality, Inc./Advanced Inspection Services, LLC 15150

More information

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z540-1-1994 FUGRO SUHAIMI LIMITED, YANBU P.O. Box 31720 Yanbu Al-Sinaiyah-41912, Kingdom of Saudi Arabia Mohammed Baquer Hameed Phone: 009663 857

More information

Dimensional Up to 25 mm/ mm 2.0 µm 0 mm to 100 mm/ 0.01 mm 7.4 μm 100 mm to 300 mm/ 0.01 mm 10 μm

Dimensional Up to 25 mm/ mm 2.0 µm 0 mm to 100 mm/ 0.01 mm 7.4 μm 100 mm to 300 mm/ 0.01 mm 10 μm IAS Accreditation Number Company Name CL-154 Almeer Technical Services Calibration Laboratory Address Plot No. 100/104, Area 7 P.O. Box 9240 Ahmadi, 61003 Kuwait Contact Name Satyananda Rao, Technical

More information

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 J. A. KING & COMPANY, LLC 6125-C Heritage Park Drive Chattanooga, TN 37416 Connie Foster Phone: 800 327 7727 or 423 899 5801 CALIBRATION Valid To: May 31, 2019

More information

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 INSTRUMENTATION DYNATHERM INC. 4127 Rue Cousens Ville St-Laurent, QC Canada H4S 1V6 Graziano Chila Phone: 514 636 7800 CALIBRATION Valid To: May 31, 2018 Certificate

More information

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z & Z

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z & Z SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z540-1-1994 & Z540.3-2006 INSPEC, INC. 7282 Haggerty Rd Canton, MI 48187 Thomas Snyder Phone: 734 451 8740 CALIBRATION Valid To: July 31, 2019 Certificate

More information

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z540-1-1994 GRAND RAPIDS METROLOGY 4215 Stafford Avenue, SW Grand Rapids, MI 49548 Dave Warner Phone: 616 538 7080 CALIBRATION Valid To: December

More information

Calibration Department Address Yard No 304 Road 4306 Block 343 Mina Salman Industrial Area Manama, Bahrain. 0 mm to 600 mm / 0.01 mm 7.

Calibration Department Address Yard No 304 Road 4306 Block 343 Mina Salman Industrial Area Manama, Bahrain. 0 mm to 600 mm / 0.01 mm 7. IAS Accreditation Number CL-132 Accredited Entity Address Yard No 304 Road 4306 Block 343 Mina Salman Industrial Area Manama, Bahrain Contact Name Mr. Masood Khatib Mr. Raja Kalimuthu Telephone +973 17727450

More information

Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK

Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK Standards & Calibration Laboratory Contact: Mr Martin Matthews Archcliffe Road Tel: +44 (0)1304 502121 Dover Fax: +44 (0)1304 502268 Kent

More information

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 J. A. KING & COMPANY, LLC 6125-C Heritage Park Drive Chattanooga, TN 37416 Connie Foster Phone: 800 327 7727 or 423 899 5801 CALIBRATION Valid To: May 31, 2019

More information

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z540-1-1994 J. A. KING & COMPANY, LLC 6125-C Heritage Park Drive Chattanooga, TN 37416 Connie Foster Phone: 800 327 7727 or 423 899 5801 CALIBRATION

More information

CERTIFICATE OF ACCREDITATION ISO/IEC 17025:2005 ANSI/NCSL Z (R2002)

CERTIFICATE OF ACCREDITATION ISO/IEC 17025:2005 ANSI/NCSL Z (R2002) CERTIFICATE OF ACCREDITATION ANSI-ASQ National Accreditation Board 500 Montgomery Street, Suite 625, Alexandria, VA 22314, 877-344-3044 This is to certify that Diamond Technical Services 11 Depot Street

More information

Testing & Calibration Lab, 204, Diamond Industrial Estate No. 2, Ketki Pada Road, (Near Dahisar Toll Naka), Dahisar (East), Mumbai, Maharashtra

Testing & Calibration Lab, 204, Diamond Industrial Estate No. 2, Ketki Pada Road, (Near Dahisar Toll Naka), Dahisar (East), Mumbai, Maharashtra Last Amended on - Page 1 of 5 SOURCE 1. DC VOLTAGE 1 mv to 32 mv 0.43 % to 0.02 % 32 mv to 32 V 0.02 % to 0.008 % 32 V to 1000 V 0.008 % to 0.02 % 2. DC CURRENT 10 µa to 320 µa 0.15 % to 0.03 % 32 µa to

More information

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z540-1-1994 JOHNSON GAGE AND INSPECTION 5920 W. 21st Street North Wichita, KS 67205 Scott Porter Phone: 316-943-7532 CALIBRATION Valid To: May 31,

More information

CERTIFICATE OF ACCREDITATION

CERTIFICATE OF ACCREDITATION CERTIFICATE OF ACCREDITATION ANSI-ASQ National Accreditation Board 500 Montgomery Street, Suite 625, Alexandria, VA 22314, 877-344-3044 This is to certify that Brylen Technologies, Inc. 275 Orange Avenue

More information

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 INCO-LABS Plot No. 151, Block No.1 Street No. 101 North Subhan, Safat, Kuwait 13071 Abdulaziz A. Al-Obaidan Phone: 00965-2475 2330 CALIBRATION Valid To: December

More information

AL ANSARI TRADING ENTERPRISE LLC P.O. BOX: 1832 PC: 112 RUWI, MUSCAT OMAN

AL ANSARI TRADING ENTERPRISE LLC P.O. BOX: 1832 PC: 112 RUWI, MUSCAT OMAN This is to signify that AL ANSARI TRADING ENTERPRISE LLC P.O. BOX: 1832 PC: 112 RUWI, MUSCAT OMAN Calibration Laboratory CL-139 has met the requirements of the IAS Accreditation Criteria for Calibration

More information

Dimensional Micrometer 0 to 25 mm / mm mm Grade 1 Gauge Block Caliper- External 0 to 150 mm / 0.01 mm

Dimensional Micrometer 0 to 25 mm / mm mm Grade 1 Gauge Block Caliper- External 0 to 150 mm / 0.01 mm IAS Accreditation Number CL-169 Accredited Entity Address Shop No. 8, Building No. 15, Barwa Village, P.O. Box 15481 Doha, Qatar Contact Name Herbert S. Tarun, Operations Manager Telephone +974 40299729

More information

CERTIFICATE OF ACCREDITATION ISO/IEC 17025:2017 ANSI/NCSL Z (R2002)

CERTIFICATE OF ACCREDITATION ISO/IEC 17025:2017 ANSI/NCSL Z (R2002) CERTIFICATE OF ACCREDITATION ANSI-ASQ National Accreditation Board 500 Montgomery Street, Suite 625, Alexandria, VA 22314, 877-344-3044 This is to certify that Accredited Calibration Services, Inc. (Marsh

More information

Calibration Laboratory Assessment Service CLAS Certificate Number Page 1 of 19

Calibration Laboratory Assessment Service CLAS Certificate Number Page 1 of 19 Calibration Laboratory Assessment Service CLAS Certificate Number 2000-03 Page 1 of 19 Transmation Canada nc. 916 Gateway Canada L7L 5K7 Contact: Robert Whittaker Tel (905) 632-5869 Toll Free (800) 897-0067

More information

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z540-1-1994 MICRO LABORATORIES INC. 7158 Industrial Park Mentor, OH 44060 Keith Kokal Phone: 440 918 0001 CALIBRATION Valid To: July 31, 2019 Certificate

More information

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z540-1-1994 QUALITY TESTING SERVICES, INC. 2305 Millpark Drive Maryland Heights, MO 63043 Heather Ryan Phone: 314 770 0607 CALIBRATION Valid To:

More information

CERTIFICATE OF ACCREDITATION

CERTIFICATE OF ACCREDITATION CERTIFICATE OF ACCREDITATION ANSI-ASQ National Accreditation Board 500 Montgomery Street, Suite 625, Alexandria, VA 22314, 877-344-3044 This is to certify that Precision Repair and Calibration 9150 Isanti

More information

TRACEABLE MEASUREMENT CAPABILITY

TRACEABLE MEASUREMENT CAPABILITY PAGE 1 OF 8 DC Voltage Only 0 mv to 200 mv 20 V to 200 V 200 V to 1000 V 1 kv to 30 kv 15 ppm + 3 µv 6 ppm + 2 µv 5 ppm + 3 µv 7 ppm + 50 µv 13 ppm + 250 µv 0.5 % Only 0 mv to 200 mv 20 V to 200 V 200

More information

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z540-1-1994 ADVANCED TECHNOLOGY SERVICES 8201 N. University St. Peoria, IL 61615 Michael White Phone: 309 693 6052 CALIBRATION Valid to: March 31,

More information

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z540-1-1994 ALABAMA SCALE & INSTRUMENT, INC. d.b.a. ASI Calibration Labs Alabama 1644 Varner Drive Mobile, AL 36693 Lawson Hill Phone: 251 660 9999

More information

QATAR CALIBRATION SERVICES WLL, (QCal) QP WEST SERVICES AREA GHUWAIRIYA, ST. IR #1 RAS LAFFAN DOHA, PO BOX STATE OF QATAR

QATAR CALIBRATION SERVICES WLL, (QCal) QP WEST SERVICES AREA GHUWAIRIYA, ST. IR #1 RAS LAFFAN DOHA, PO BOX STATE OF QATAR This is to attest that QATAR CALIBRATION SERVICES WLL, (QCal) QP WEST SERVICES GHUWAIRIYA, ST. IR #1 RAS LAFFAN DOHA, PO BOX 16069 STATE OF QATAR Calibration Laboratory CL-178 has met the requirements

More information

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z & ANSI/NCSL Z

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z & ANSI/NCSL Z SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z540-1-1994 & ANSI/NCSL Z540.3-2006 EXPHIL CALIBRATION LABS, INC. 415 Central Avenue Bohemia, NY 11716 Steven Pidd Phone: 631 563 3520 CALIBRATION

More information

Certificate of Accreditation

Certificate of Accreditation PERRY JOHNSON LABORATORY ACCREDITATION, INC. Certificate of Accreditation Perry Johnson Laboratory Accreditation, Inc. has assessed the Laboratory of: (Hereinafter called the Organization) and hereby declares

More information

Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK

Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK Laboratory locations: Old Lane West Berkshire RG12 7AH Contact: Mr M Trotter Tel: +44 (0)1344 459314 Fax: +44 (0)1344 465556 E-Mail: martin.trotter@bsria.co.uk

More information

Certificate of Accreditation

Certificate of Accreditation Certificate of Accreditation ISO/IEC 17025:1999 Certificate Number L1048 Digital Measurement Metrology Inc. 26 Automatic Road, Unit 4 Raj Sharma Brampton, Ontario L6S 5N7 Canada Is recognized by the Laboratory

More information

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z540-1-1994 JM TEST SYSTEMS, INC. Calibration Laboratory Division 7323 Tom Drive Baton Rouge, LA 70806 Jerry Kraus Phone: 225 925 2029 x3028 CALIBRATION

More information

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z540-1-1994 EXPHIL CALIBRATION LABS, INC. 415 Central Avenue Bohemia, NY 11716 Steven Pidd Phone: 631 563 3520 CALIBRATION Valid To: October 31,

More information

Calibration Specialists Ltd

Calibration Specialists Ltd The National Technological Park, Castletroy, Limerick Calibration Laboratory Registration number: 001C is accredited by the Irish National Board (INAB) to undertake calibration as detailed in the Schedule

More information

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z540-1-1994 CONTROL AUTOMATION TECHNOLOGIES CORP 6540 Emmaus Church Road Suite 106 Providence Forge, VA 23140 Rob Igoe Phone: 336 725 6120 Ext 2

More information

CERTIFICATE OF ACCREDITATION ISO/IEC 17025:2005 ANSI/NCSL Z (R2002)

CERTIFICATE OF ACCREDITATION ISO/IEC 17025:2005 ANSI/NCSL Z (R2002) CERTIFICATE OF ACCREDITATION ANSI-ASQ National Accreditation Board 500 Montgomery Street, Suite 625, Alexandria, VA 22314, 877-344-3044 This is to certify that Alliance Calibration 11402 Reading Road Cincinnati,

More information

CERTIFICATE OF ACCREDITATION

CERTIFICATE OF ACCREDITATION CERTIFICATE OF ACCREDITATION ANSI-ASQ National Accreditation Board 500 Montgomery Street, Suite 625, Alexandria, VA 22314, 877-344-3044 This is to certify that Total Solutions, Inc. 7722 Metric Drive Mentor,

More information

IAS Accreditation Number RICI Muhammad Abdullah Al-Azzaz Company Limited Address P.O. Box Al-Khobar 31952

IAS Accreditation Number RICI Muhammad Abdullah Al-Azzaz Company Limited Address P.O. Box Al-Khobar 31952 IAS Accreditation Number CL-151 Accredited Entity RICI Muhammad Abdullah Al-Azzaz Company Limited Address P.O. Box 31172 Al-Khobar 31952 Contact Name Muhammad Jawad Ali Technical Manager Telephone +966-13-8346304/

More information

Certificate of Accreditation

Certificate of Accreditation PERRY JOHNSON LABORATORY ACCREDITATION, INC. Certificate of Accreditation Perry Johnson Laboratory Accreditation, Inc. has assessed the Laboratory of: (Hereinafter called the Organization) and hereby declares

More information

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005. J. A. KING & COMPANY, LLC 7103 Juniper Road Fairview, TN Connie Foster Phone:

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005. J. A. KING & COMPANY, LLC 7103 Juniper Road Fairview, TN Connie Foster Phone: SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 J. A. KING & COMPANY, LLC 7103 Juniper Road Fairview, TN 37062 Connie Foster Phone: 800 327 7727 CALIBRATION Valid To: May 31, 2019 Certificate Number: 1741.08

More information

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z540-1-1994 PROBATA CORPORATION 14600 Metro Plaza Blvd. Edmond, Oklahoma 73013 Greg Chambers Phone: 405 607 4813 CALIBRATION Valid To: September

More information

CERTIFICATE OF ACCREDITATION. ANSI/NCSL Z (R2002) and ANSI/NCSL Z (R2013)

CERTIFICATE OF ACCREDITATION. ANSI/NCSL Z (R2002) and ANSI/NCSL Z (R2013) CERTIFICATE OF ACCREDITATION ANSI-ASQ National Accreditation Board 500 Montgomery Street, Suite 625, Alexandria, VA 22314, 877-344-3044 This is to certify that Micro Precision Calibration 5909 Breckenridge

More information

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005. PYLON ELECTRONICS INC. 147 Colonnade Road Ottawa, Ontario Canada K2E 7L9 Jim Mullins Phone:

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005. PYLON ELECTRONICS INC. 147 Colonnade Road Ottawa, Ontario Canada K2E 7L9 Jim Mullins Phone: SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 PYLON ELECTRONICS INC. 147 Colonnade Road Ottawa, Ontario Canada K2E 7L9 Jim Mullins Phone: 613 226 7920 CALIBRATION Valid To: September 30, 2018 Certificate

More information

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 ANSI/NCSL Z & ANSI/NCSL Z

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 ANSI/NCSL Z & ANSI/NCSL Z SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 ANSI/NCSL Z540-1-1994 & ANSI/NCSL Z540.3-2006 TRESCAL, INC. 1125 North Corporate Drive, Suite 207-A Mobile, AL 36607 Sergey Pasechnikov Phone: 251-461-6609

More information

ANSI-ASQ National Accreditation Board/ACLASS

ANSI-ASQ National Accreditation Board/ACLASS ANSI-ASQ National Accreditation Board/ACLASS SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z540-1-1994 Precision Repair and Calibration 9150 Isanti Street NE Blaine, MN 55449 Jane McDougall

More information

SCOPE OF ACCREDITATION TO ISO/IEC 17043:2010

SCOPE OF ACCREDITATION TO ISO/IEC 17043:2010 SCOPE OF ACCREDITATION TO ISO/IEC 17043:2010 HN PROFICIENCY TESTING INC. 10219 Coral Reef Way Indianapolis, IN 46256 Henrik Nielsen Phone: 317 713 2988 Web: http://www.hn-proficiency.com/ PROFICIENCY TESTING

More information

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005. NORTHSTAR CALIBRATION, INC th Place NW Owatonna, MN John Moorhouse Phone:

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005. NORTHSTAR CALIBRATION, INC th Place NW Owatonna, MN John Moorhouse Phone: SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 NORTHSTAR CALIBRATION, INC. 1045 26th Place NW Owatonna, MN 55060 John Moorhouse Phone: 507 444 9111 CALIBRATION Valid To: February 29, 2020 Certificate Number:

More information

Scope of Accreditation For The Calibration Solution Inc. Calibration

Scope of Accreditation For The Calibration Solution Inc. Calibration Scope of Accreditation For The Solution Inc. 9865 North Alpine Road Machesney Park, IL 61115 Jeff Tratnik 815-877-0880 In recognition of a successful assessment to ISO/IEC 17025:2005 and ANSI/NCSL Z540.1:1994,

More information

Accredited Laboratory

Accredited Laboratory Accredited Laboratory A2LA has accredited NORTHSTAR CALIBRATION, INC. Owatonna, MN for technical competence in the field of Calibration This laboratory is accredited in accordance with the recognized International

More information

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2017. J. A. KING 354 Riverchase Way Lexington, SC Connie Foster Phone: CALIBRATION

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2017. J. A. KING 354 Riverchase Way Lexington, SC Connie Foster Phone: CALIBRATION SCOPE OF ACCREDITATION TO ISO/IEC 17025:2017 J. A. KING 354 Riverchase Way Lexington, SC 29072 Connie Foster Phone: 800 327 7727 CALIBRATION Valid To: February 28, 2021 Certificate Number: 1741.12 In recognition

More information

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSLI Z

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSLI Z SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSLI Z540-1-1994 TEKTRONIX, INC. 9902 East 43 RD Street Suite D Tulsa, OK 74146 Mark Jackson Phone: 800 438 8165 CALIBRATION Valid To: September 30,

More information

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z540-1-1994 INSTRUMENT CALIBRATION SOLUTIONS, INC. 413 Hopewell Avenue Aliquippa, PA 15001 Mr. David Beier Phone: 724 846 0136 CALIBRATION Valid

More information