Product Catalog. Product Catalog

Transcription

1 Product Catalog Product Catalog CURRENT SENSE RESISTORS THIN FILM RESISTORS THICK FILM CHIP RESISTORS MLCC CAPACITORS

2 Selection Guide 2-5 Application by Product 6 Current Sense Resistors CPA, CPP, WEL, WKL, MPA, TFEL, MPC, LPC 7-17 Thin Film Resistors TF, AF, AS, SRN, MF Table of Contents Thick Film Chip Resistors TFA, TFAS, TFG, TFGL, TFP, TFHP, TFHV, TFV, TFM, TFUV, TFS, TFH Thick Film Resistor Arrays TRA, TWA, TCA, TRN MLCC Capacitors CGL, CST, CRF, CAL, CLP, CNM MLCC Capacitor Arrays CAC, CAA CURRENT SENSE CHIP RESISTORS CPA CPP WEL WKL MPA TFEL MPC LPC Description 4-Terminal High Power, 4-Terminal Wrapped Terminations, Anti-Sulfur Non-Wrapped Terminations, Anti-Sulfur Metal Strip Thick Film Power, AEC-Q200, Anti-Sulfur High Current Jumper Sizes Available 0306, 0508, 0612, See Page 9 See Page , 0402, 0603, 0805, , 0805, , 0805, 1206 Power 2 Watts 1.5 Watts 5 Watts 5 Watts 2, 3 Watts 1.5 Watts 1 Watt 1 Watt Resistance Range 0.5mΩ~75mΩ 0.5mΩ~100mΩ 1mΩ~500mΩ 1mΩ~500mΩ 1mΩ~10mΩ 10mΩ~976mΩ 2mΩ~20mΩ +Jumper Jumper 0.5%, 1.0% 0.5%, 1.0% 0.5%, 1.0% 0.5%, 1.0% 1.0%, 2.0%, 5.0% 1.0%, 5.0% 1.0%, 2.0%, 2.5% 5mΩ max. TCR ppm/ C ±50, ±100, ±200 ±50, ±100, ±200 ±50, ±100 ±50, ±100 ±75, ±100 ±100, ±150, ±250 ±100, ±150 ±100 Page Number RESISTOR RATED POWER SELECTION GUIDE CPA CPP WEL/ WKL MPA TFEL MPC TF/ AS AF MF TFA TFAS TFG TFGL TFP TFHP TFHV TFV TFM TFUV TFS TFH 1/4 1/3 2/5 1/2 3/ / Contact Information E mail: sales@thin film.com Phone: 1 (507) Contact Information sales@thin-film.com Phone: 1 (507)

3 Thin Film Thin Film Technology Corp THIN FILM RESISTORS TF AF AS SRN MF Description High Precision Tantalum Nitride Anti-Sulfur Resistor Network MELF Sizes Available 0201, 0402, 0603, 0805, 1206, 1210, 2010, , 0603, 0805, , 0603, 0805, 1206, 1210, 2010, , 0204 Power 1 Watt 2/5 Watt 1 Watt 1/10 Watt 1 Watt Resistance Range 4.7Ω~3MΩ 10Ω~1MΩ 4.7Ω~1.5MΩ 47Ω~200kΩ 0.2Ω~1MΩ 0.05%, 0.1%, 0.25%, 0.5%, 1.0% 0.05%, 0.1%, 0.25%, 0.5%, 1.0% 0.05%, 0.1%, 0.5%, 1.0% ±0.05% 0.1%, 0.25%, 0.5%, 1.0% TCR ppm/ C ±5, ±10, ±25, ±50 ±10, ±15, ±25, ±50 ±25, ±50 ±25, ±50 ±25, ±50 Page Number TFHV Ultra High Voltage TFUV Ultra High Voltage UL Certified THICK FILM CHIP RESISTORS TFAS TCR: ±100ppm C, ±200ppm C Sizes: 0402, 0603, 0805, 1206,1210, 2010, 2512 : 1.0%, 5.0% High Grade Anti-Sulfur TFS TCR: ±100ppm C, ±200ppm C Sizes: 0603, 0805, 1206, 1210, 2010, 2512 : 5.0%, 10.0%, 20% Anti-Surge / AEC-Q200 TFHP TCR: ±100ppm C, ±200ppm C Sizes: 01005, 0201, 0402, 0603, 0805, 1206,1210, 2010, 2512 : 1.0%, 5.0% Triple High Power TFG TCR: ±100ppm C, ±200ppm C Sizes: 0603, 0805, 1206,1210, 2010, 2512 : 1.0%, 5.0% Total Lead Free TFA TCR: ±100ppm C, ±200ppm C Sizes: 0201, 0402, 0603, 0805, 1206, 1210, 1218, 2010, 2512 : 1.0%, 5.0% Automotive Grade General Purpose High TFGL TCR: ±100ppm C, ±200ppm C Sizes: 01005, 0201, 0402, 0603, 0805, 1206, 1210, 1218, 2010, 2512 : 1.0%, 5.0% TFA TFAS TFG TFGL TFP TFHP TFHV TFV TFM TFUV TFS TFH Power Precision R-Value Voltage TFP TCR: ±100ppm C, ±150ppm C Sizes: 0402, 0603, 0805, 1206, 1210, 2010, 2512 : 1.0%, 5.0% Power: 2 Watt TFH TCR: ±50ppm C, ±100ppm C Sizes: 0201, 0402, 0603, 0805, 1206, 1210, 2010, 2512 : 0.1%, 0.5%, 1.0% TCR: ±50ppm C TFM TCR: ±200ppm C Sizes: 0402, 0603, 0805, 1206 : 1.0%, 5.0% R-Value: 10MΩ~100MΩ TFV TCR: ±100ppm C, ±150ppm C Sizes: 0603, 0805, 1206, 2010, 2512 : 1.0%, 2.0%, 5.0% Voltage: 1,600V Description Automotive High Grade Anti-Sulfur Total Lead Free General Purpose High Power Triple High Power Ultra High Voltage High Voltage High R-Value UL Certified Anti-Surge High Precision Sizes Available 0201, 0402, 0603, 0805, 1206, 1210, 1218, 2010, , 0603, 0805, 1206, 1210, 2010, , 0201, 0402, 0603, 0805, 1206, 1210, 1218, 2010, , 0201, 0402, 0603, 0805, 1206, 1210, 1218, 2010, , 0603, 0805, 1206, 1210, 2010, , 0805, 1206, 1210, 2010, , , 0805, 1206, 2010, , 0603, 0805, , 0805, 1206, 2010, , 0805, 1206, 1210, 2010, , 0402, 0603, 0805, 1206, 1210, 2010, 2512 Power 1 Watt 1 Watt 1 Watt 1 Watt 2 Watt 3 Watt 1 Watt 1 Watt 1/4 Watt 1 Watt 1 Watt 1 Watt Resistance Range 1Ω~10MΩ Jumper 1Ω~10MΩ Jumper 1Ω~10MΩ Jumper 1Ω~10MΩ Jumper 1Ω~1MΩ Jumper 1Ω~1MΩ 1Ω~16MΩ 47Ω~51MΩ 10MΩ~ 100MΩ 100KΩ~ 100MΩ 0.27Ω~ 22MΩ 1Ω~10MΩ 1.0%, 5.0%, 1.0%, 2.0%, 1.0%, 5.0% 1.0%, 5.0% 1.0%, 5.0% 1.0%, 5.0% 1.0%, 5.0% 1.0%, 5.0% 1.0%, 5.0% 1.0%, 5.0% 20% 5.0% 5.0%, 10%, 20% 0.1%, 0.5%, 1.0% TCR ppm/ C ±100, ±200 ±100, ±200 ±100, ±200 ±100, ±200 ±100, ±150, ±200 ±100, ±200 ±200 ±100, ±200 ±200 ±100, ±200 ±100, ±200 ±50, ±100, ±200 Page Number For a complete listing of products visit 3

4 THICK FILM RESISTOR NETWORKS TRA TWA TCA TRN Description Automotive Array High Density Array 2-4 Resistor Array Ladder Network Sizes Available 0404, 0606, 0804, , 0804, Power 1/10 Watt 1/16 Watt 1/10 Watt 1/16 Watt Resistance Range 1Ω~1MΩ Jumper 10Ω~100kΩ Jumper 3Ω~1MΩ Jumper 10Ω~ 100kΩ 1.0%, 5.0% 1.0%, 5.0% 1.0%, 5.0% 5.0% TCR ppm/ C ±200, ±300 ±200 ±200, ±300 ±200 Page Number Multilayer Ceramic Capacitors- Low Profile, High Automotive: Consisting Capacitance: Ideal for LCD panels, PCMCA cards, of NPO, X7R and X5R and other application with thickness dielectrics, which provide concerns. Ultra thin capacitors for product with high electrical applications with low clearance. precision, stability, and reliability. This assure quality and performance in automotive applications. AEC-Q200 qualified CLP Series X7R, X5R, Y5V 0.22µF to 1µF 0402, 0603, 0805, CAL Series 1206 and 1210 General Purpose: Ideal for consumer electronics, telecom, power supply and other applications. They feature a wide range of sizes and a high capacitance for the given component size. Covering dielectrics of NP0(C0G), X7R, X5R, and Y5V Also available in high voltage up to 4,000 volts. NPO, X7R, X5R 0.5pF to 1µF 0402, 0603, 0805, 1206, 1210, and 1812 CGL Series NPO, X7R, X5R, Y5V 0.1pF to 1µF 0201, 0402, 0603, 0805, 1206, 1210, and 1812 Non-Magnetic: Ideal for applications requiring high electrical precision, stability, and reliability. Useful in many applications such as high reliability medical systems, high voltage coupling/dc blocking, and back light inverters. CNM Series NPO, X7R 0.5pF to 1µF 0603, 0805, 1206, 1210, 1808, 1812, 1825, 2220, 2225 CRF Series NPO 0.1pF to 100pF 01005, 0201, 0402, 0603 and 0805 CST Series NPO, X7R, X5R, Y5V 0.1pF to 1µF 0402, 0603, 0805, 1206, 1210, and 1812 Microwave Series (RF): These offer a high Q and low ESR performance at high frequency. They offer ultra low capacitance and high precision tolerance. They are ideal for telecom applications as they can improve the quality of telephone calls, reduce power loss, and provide better overall performance. Full size range 0201 to 0805 DC-20GHz applications Flexible Termination: These are designed with a polymer layer in the end terminations of the product, which can absorb mechanical stress caused by PCB handling in SMT line which also reduces the mechanical impact for the product. These products are ideal for the automotive, power supply, lighting and other industries. Eliminates the possibility of Cap cracking especially for sizes above Dielectrics of NP0(C0G), X7R, X5R,Y5V. Also available in high voltage up to 3,000 volts. CAC Series NPO, X7R, Y5V 10pF to 0.1µF 0508 and 0612 High Density Automotive Grade CAA Series NPO, X7R 10pF to 0.1µF 0508 MLCC CAPACITORS CGL CST CRF CAL CLP CNM CAC CAA Description General Purpose & High Voltage Flexible Termination & High Voltage Microwave Series (RF) Automotive Low Profile, High Capacitance Non Magnetic High Density Array Automotive Array Sizes Available 0201, 0402, 0603, 0805, 1206, 1210, , 0603, 0805, 1206, 1210, , 0201, 0402, 0603, , 0603, 0805, 1206, 1210, , 0603, 0805, 1206, , 0805, 1206, 1210, 1808, 1812, 1825, 2220, , Capacitance Range 0.1pF~1µF 0.1pF~1µF 0.1pF~100pF 0.5pF~1µF 0.22pF~47µF 0.5pF~1µF 10pF~0.1µF 10pF~0.1µF Capacitance ±0.05pF, ±0.1pF, ±0.25pF, ±0.5pF, ±1.0%, ±2.0%, ±5.0%, ±10.0%, ±20.0%, -20/+80% ±0.1pF, ±0.25pF, ±0.5pF, ±1.0%, ±2.0%, ±5.0%, ±10.0%, ±20.0%, -20/+80% ±0.05pF, ±0.1pF, ±0.25pF, ±0.5pF, ±1.0%, ±2.0%, ±5.0% ±0.1pF, ±0.25pF, ±0.5pF, ±1.0%, ±2.0%, ±5.0%, ±10.0%, ±20.0% ±10.0%, ±20.0%, -20/+80% ±0.1pF, ±0.25pF, ±0.5pF, ±1.0%, ±2.0%, ±5.0%, ±10.0%, ±20.0%, ±5.0%, ±10.0%, ±20.0%, -20/+80% ±5.0%, ±10.0%, ±20.0%, Dielectric Material X7R, Y5V, NPO, X5R X7R, Y5V, NPO, X5R NPO X7R, NPO, X5R X7R, Y5V, X5R X7R, NPO X7R, Y5V, NPO X7R, NPO Page Number Contact Information E mail: sales@thin film.com Phone: 1 (507) Contact Information sales@thin-film.com Phone: 1 (507)

5 Thin Film Thin Film Technology Corp Load Life Charts: Thin Film Series TF Series AS Series AF Series Standard EIA Decade Values Table E E E 24 E 96 E For a complete For a complete listing listing of products of products visit visit Film.com 5 5

6 Application Industrial Instrumentation Automotive Telecom Military & Aerospace Medical Consumer CPA/CPP WEL/WKL MPA TFEL MPC MPC Jumper/LPC Jumper TF AF AS SRN MF TFA TFAS TFG TFGL TFP TFHP TFHV TFV TFM TFUV TFS TFH TCA TRN/TRA/TWA CGL CGL_HV CST CST_HV CRF CAL CLP CNM CAA CAC 6 6 Contact Information Contact Information E mail: sales@thin film.com sales@thin-film.com Phone: Phone: 1 (507) 1 (507)

7 Thin Film Thin Film Technology Corp Current Sense Resistors TFT s number one product is it s uniquely designed Current Sense Resistor (CSR). Using new and innovative technology for accuracy and precision, it is what every application needs. TFT s research and industry leading experience has led to the development of the most accurate current sense resistor. Using thoughtful engineering and understanding of the relation between materials, temperature, and current flow, TFT has been able to create a product with ability to hold an accurately known R-Value through the PCB reflow process and life of the component. TFT s parts are inherently sulfur resistant, as silver is not used in the construction and all materials are non-reactive with sulfur. The product is cost effective through automated and high-volume production, which provides unmatched cutting-edge trim processes. How do Current Sense Resistors work? Current Sense Resistors work by providing a highly accurate known ultra-low ohm resistance to pass current through while providing isolated terminals to effectively and accurately measure the voltage drop. Ohm s law states that the voltage across a resistor is proportional to the current, holding resistance constant. This allows the voltage to be measured by the current where I=V/R. Resulting errors come from the unknown or inaccurate R-Value or the change in the voltage drop not being accurately measured. TFT solves both of these problems by producing a very accurate current sensing device through use of high quality trim, low TCR material, and independent voltage sensing terminals. TFT offers both 2-terminal current sense resistors and 4-terminal kelvin sense resistors. TFT s 4-terminal is industry leading in accuracy and stability after mounting the PCB compared to the competition. TFT s 2-terminal CSR is an economical choice with a large array of options, offering anything from the small size of 0201, tolerances down to 0.5%, and up to 5 watts of power. TFT s 4-terminal Kelvins sense resistors offer higher precision and board mounted accuracy. TFT uses isolated terminals to give a true 4-terminal part, unlike many competitors. Isolating the terminals on a 4-terminal current sense resistors reduces parasitic resistance between the source and sense terminal that impacts overall resistor performance. TFT s 4-wire connection point occurs within the component and uses the same point the when the product is trimmed to value during the manufacturing process; unlike our competitors whose connection points occur where the trace lines meet the land pattern, eliminating circuit board electrode pads and wraparound electrodes to create parasitic resistance and induce error. In addition, our design also reduced the likelihood that solder fills the area between the source and sense terminals preventing inconsistencies. These issues become more prevalent when using very low resistance CSR, as PCB reflow of the resistive material can cause a shift in material grain structure in the reflow process, which typically reaches 260 C. When the resistance is low (down to.5mω), a slight shift in resistance can cause large R-Value errors. Typical CSR designs supports an 8% board mounted sensing accuracy that allows for parts to be outside of initial specifications. However, with improved design, TFT boasts and accuracy of less than 1% board mounted sensing accuracy. Competitor 4 Term TFT 4 Term Competitor 4 Term Competitor 4 Term 2 For a complete For a complete listing listing of products of products visit visit Film.com 7 7

8 CPA Series 4-Terminal Current Sense Chip Resistor High purity alumina substrate Metal film resistive element Epoxy-resin overcoat Anti-sulfur 0603, 1206, 0805, and 2512 English sizes TCR s down to ±50 ppm/ C Resistance down to 0.5mΩ available High power handling in a small package, up to 2 watts AEC-Q200 available These low resistance chip resistors exhibit excellent noise performance, surface heat distribution, and a lower surface temperature. They are offered with a face down construction (pattern side down) and are useful in many applications including power IC s, batteries, automotive, and other applications requiring ultra-precise current sensing. TFT offers the most dependable PCB mounted accuracy in the market. Product Designator CP Ceramic Type A = Alumina **0306 (0816) 0612 (1632) 0508 (1220) 1225 (3264) Temp. Coefficient of Resistance (TCR) Q = ±50ppm/ C R = ±100ppm/ C S = ±200ppm/ C Resistance Value * Ex. R001 = 0.001Ω (4 digits) D = ±0.5% Custom Designator F = Face Down W = White Top Automotive Grade A = Automotive AEC-Q200 Leave Blank for Non AEC-Q200 T&R Packaging QTY -T5 = 5,000 -T50 = 5,000 *Note 1: For resistance values of one milliohm or greater, use R to specify the decimal point (i.e. R005=0.005Ω). For resistance values less than one milliohm or those with 1/2 milliohm increments, use M to specify the decimal point (i.e. 0M50=0.50mΩ and 2M50 = 2.50mΩ). **Note 2: For 0306 size, Part number will be CPC0306 Dimension Inch (mm) 0306 (0816) 0508 (1220) 0612 (1632) 1225 (3264) L (0.80±0.15) (1.25±0.20) (1.55±0.20) (3.20±0.20) W (1.60±0.20) (2.00±0.20) (3.20±0.20) (6.40±0.20) T (0.40±0.05) 0.016±0.02 (0.40±0.05) (0.35±0.15) (0.40±0.10) T (0.15±0.05) (0.15±0.05) (0.15±0.05) (0.20±0.15) S (0.93±0.20) (1.45±0.20) (2.16±0.20) (5.12±0.20) S (0.40±0.10) (0.20±0.15) (0.50±0.20) (0.50±0.20) S (0.23±0.10) (0.25±0.10) (0.46±0.20) (0.62±0.20) B (0.93±0.20) (0.145±0.20) (2.16±0.20) (5.12±0.20) B (0.40±0.10) (0.20±0.15) (0.50±0.20) (0.50±0.20) B (0.23±0.10) (0.25±0.10) (0.46±0.20) (0.62±0.20) B (0.18±0.10) (0.20±0.10) (0.41±0.20) (0.50±0.20) B (0.40±0.20) (0.70±0.20) 0.028± (0.70±0.20) (2.04±0.20) G max. (0.05 max.) (0.02 typical) Type CPC0306 CPA0508 CPA0612 CPA1225 Power 1/3 W 1/2 W 1 W 2 W max. (0.08 max.) (0.04 typical) max. (0.08 max.) (0.04 typical) % (code) ±0.5(D), TCR ppm/ C (code) ±100(R) ±50(Q) ±100(R) ±100(R) ±50(Q) ±100(R) ±200(S) ±100(R) ±50(Q) ±100(R) ±50(Q) Resistance Range (mω) 1mΩ, 2mΩ, 3mΩ, 5mΩ 01mΩ, 2mΩ, 5mΩ 1mΩ, 2mΩ 3mΩ, 5mΩ 0.5mΩ, 0.75mΩ 1mΩ, 2mΩ, 3mΩ, 5mΩ~100mΩ 0.5mΩ, 1mΩ, 2mΩ, 3mΩ 5mΩ~10mΩ -55 C~+155 C Packaging 5,000 pcs/reel 8 8 Contact Information E mail: sales@thin film.com Phone: 1 (507) Contact Information sales@thin-film.com Phone: 1 (507)

9 Thin Film Thin Film Technology Corp High purity alumina substrate Metal film resistive element Epoxy-resin overcoat Anti-sulfur 1206 English size TCR s down to ±50 ppm/ C Resistance down to 0.5mΩ available High power handling in a small package, up to 1 1/2 watts AEC-Q200 available CPP Series 4-Terminal High Power Current Sense Chip Resistor These higher power, low resistance chip resistors exhibit excellent noise performance, surface heat distribution, and a lower surface temperature. They are offered with a face down construction (pattern side) and are useful in many applications including power IC s, batteries, automotive, and other applications requiring ultra-precise current sensing. TFT offers the most dependable PCB mounted accuracy in the market. Product Designator CP Ceramic Type P = Alumina with 1.5 watt rating 0612 (1632) Temp. Coefficient of Resistance (TCR) Q = ±50ppm/ C R = ±100ppm/ C S = ±200ppm/ C Resistance Value * Ex. R003 = 0.003Ω (4 digits) D = ±0.5% Custom Designator Automotive Grade T&R Packaging QTY A = Automotive F = Face down AEC-Q200 Leave blank for non -T50 = 5,000 AEC-Q200 *Note: For resistance values of one milliohm or greater, use R to specify the decimal point (i.e. R005=0.005Ω). For resistance values less than one milliohm or those with 1/2 milliohm increments, use M to specify the decimal point (i.e. 0M50=0.50mΩ and 2M50 = 2.50mΩ). Dimension Inch (mm) Dimension Inch (mm) L (1.55±0.20) B (2.16±0.20) W (3.20±0.20) B2 (0.50±0.20) T (0.35±0.15) B (0.46±0.20) T (0.15±0.05) B (0.41±0.20) S (2.16±0.20) B (0.70±0.20) S2 (0.50±0.20) G max. (0.08 max. ) (0.04 typical) S (0.46±0.20) Type CPP0612-FF Metric Size 1632 Power Rated Voltage 1 1/2 W Power x Resistance % (code) ±0.5(D), Resistance Range (mω) 0.5mΩ, 0.75mΩ 1mΩ, 2mΩ, 2.5mΩ, 3mΩ 5mΩ, 100mΩ TCR ppm/ C (code) ±200(S) ±100(R) ±50(Q) Packaging -55 C~+155 C 5,000 pcs/reel For a complete For a complete listing listing of products of products visit visit Film.com 9 9

10 WEL Series Current Sense Chip Resistor High purity alumina substrate Metal film resistive element Epoxy-resin overcoat Wrap around terminations Anti-sulfur Short and long side electrode, variety of sizes TCR s down to ±50 ppm/ C Resistance down to 1mΩ available High power handling in a small package Optimal linearity in I/V conversion AEC-Q200 available These low ohm current sense resistors are designed for tight resistance tolerance, low noise, long-term stability, and high heat dissipation capability in a small package. Delivering ultra low ohm, tight tolerance, and TCR in short terminal and long terminal packages. This series is ideal for use in power management modules, motor control circuits and automotive applications. This series varies from the WKL series as this series has wrap-around terminations. These current sense resistors are ideal where stability and accuracy are needed with price points to suit the highest demand. Product Operating Temp Range Resistance Value Resistance Automotive Grade T&R Packaging QTY WEL (Refer to type in electrical tables) M = -55 C~+155 C C = -55 C~+175 C Ex. R010 = 10mΩ R100 = 100mΩ D = ±0.5% A = Automotive AEC-Q200 Leave blank for non AEC-Q200 -T1 = 1,000 -T2 = 2,000 -T4 = 4,000 -T5 = 5,000 (Refer to Electrical Table) Short Side Electrode Type WEL0603 WEL0805 WEL1206 WEL2010 WEL2512 WEL4320 WEL4527 Metric Size Power 1/2 W 3/4 W 1 W 1 1/2 W 2 W 3 W 4 W Resistance Range (mω) % (code) Resistance Offering TCR ppm/ C (code) Operating Temp. Range Rated Voltage 5~9 10~200 4~9 10~500 3~9 10~500 5~9 10~500 5~9 10~500 5~9 10~500 5~9 10~500 ±0.5(D), ±0.5(D), ±0.5(D), ±0.5(D), ±0.5(D), ±0.5(D), ±0.5(D), 1mΩ steps ±100(R) ±50(Q) ±100(R) ±50(Q) ±100(R) ±50(Q) ±100(R) ±50(Q) ±100(R) ±50(Q) ±100(R) ±50(Q) ±100(R) ±50(Q) M= -55 C~+155 C, C= -55 C~+175 C Power x Resistance Packaging 5,000 pcs/reel 4,000 pcs/reel 2,000 pcs/reel 1,000 pcs/reel Long Side Electrode Type WEL0508 WEL0612 WEL0815 WEL1020 WEL1225 WEL0830 WEL1530 WEL1836 WEL2043 Metric Size Power 1 W 1 1/2 W 2 W 2 W 3 W 3 W 4 W 4 W 5 W Resistance Range (mω) 1~4 5~200 1,2 3~500 1,2 3~500 1,2 3~500 1,2 3~500 1,2 3~500 1,2 3~500 1,2 3~500 1,2 3~500 % (code) ±0.5(D), ±0.5(D), ±0.5(D), ±0.5(D), ±0.5(D), ±0.5(D), ±0.5(D), ±0.5(D), ±0.5(D), Resistance Offering TCR ppm/ C (code) Operating Temp. Range Rated Voltage 1mΩ steps ±100(R) ±50(Q) ±100(R) ±50(Q) ±100(R) ±50(Q) ±100(R) ±50(Q) ±100(R) ±50(Q) ±100(R) ±50(Q) ±100(R) ±50(Q) ±100(R) ±50(Q) ±100(R) ±50(Q) M= -55 C~+155 C, C= -55 C~+175 C Power x Resistance Packaging 5,000 pcs/reel 4,000 pcs/reel 2,000 pcs/reel Contact Information E mail: sales@thin film.com Phone: 1 (507) Contact Information sales@thin-film.com Phone: 1 (507)

11 Thin Film Thin Film Technology Corp Why choose wrapped electrodes: Wrapped around electrodes allow for visual inspection due to the solder fillet created on the side of the termination. Wrapped Electrodes 1: Alumina ceramic 2: Overcoat I (Primary glass protection layer) 3: Overcoat II (C2) 4: Conductor (C3) 5: Resistance 6: Marking 7: Termination Passivation layer Termination Substrate Resistive material Land pad Product Dimensions and Recommended Land Patterns: PC board Part Number Electrode Type Resistance Range Component Dimensions (inches) Land Pattern Dimensions (inches) L W A T P W D WEL0603 A 5mΩ mΩ~200mΩ WEL0805 A 4mΩ~500mΩ WEL1206 A 3mΩ~4mΩ 0.047± mΩ~500mΩ 0.026± WEL2010 A 5mΩ~500mΩ ± WEL2512 A 5mΩ~500mΩ 0.252± ± ± WEL4320 A 5mΩ~500mΩ 0.437± ± ± WEL4527 A 5mΩ~500mΩ 0.457± ± ± ± WEL0508 B 1mΩ~200mΩ WEL0612 B 1mΩ 0.021± mΩ~500mΩ WEL0815 B 1mΩ~500mΩ WEL1020 B 1mΩ~500mΩ WEL1225 B 1mΩ~500mΩ 0.126± ± WEL0830 B 1mΩ~500mΩ 0.102± ± ± WEL1530 B 1mΩ~500mΩ 0.154± ± ± WEL1836 B 1mΩ~500mΩ 0.181± ± ± WEL2043 B 1mΩ~500mΩ 0.201± ± ± (bottom) Type A: Short Electrode Type B: Long Electrode (top) Voltage Terminal (-) Voltage Terminal (+) (bottom) (top) Voltage Terminal (+) Voltage Terminal (-) Current Terminal (-) Current Terminal (+) Current Terminal (-) Current Terminal (+) For a complete For a complete listing listing of products of products visit visit Film.com

12 WKL Series Current Sense Chip Resistor High purity alumina substrate Metal film resistive element Epoxy-resin overcoat Non-wrapped terminations Anti-sulfur Short and long side electrode, variety of sizes TCR s down to ±50 ppm/ C Resistance down to 1mΩ available High power handling in a small package Optimal linearity in I/V conversion AEC-Q200 available These low ohm current sense resistors are designed for tight resistance tolerance, low noise, long-term stability, and high heat dissipation capability in a small package. This series is ideal for use in power management modules, motor control circuits, and automotive applications. This series varies from the WEL series as this series has non-wrapped terminations. Non-wrapped electrode current sense resistors are ideal for tight space projects while still delivering the same thermal and power handling as wrapped electrode components, but in a smaller foot print. Product Designator Operating Temp Range Resistance Value Resistance Automotive Grade T&R Packaging QTY WKL (Refer to type in electrical tables) M = -55 C~+155 C C = -55 C~+175 C Ex. R010 = 10mΩ R100 = 100mΩ D = ±0.5% A = Automotive AEC-Q200 leave blank for non AEC-Q200 -T1 = 1,000 -T2 = 2,000 -T4 = 4,000 -T5 = 5,000 (Refer to Electrical Table) Short Side Electrode Type WKL0805 WKL1206 WKL2010 WKL2512 WKL4320 Metric Size Power 3/4 W 1 W 1 1/2 W 2 W 3 W Resistance Range (mω) 4~9 10~500 3~9 10~500 5~9 10~500 5~9 10~500 5~9 10~500 % (code) ±0.5(D), ±0.5(D), ±0.5(D), ±0.5(D), ±0.5(D), Resistance Offering TCR ppm/ C (code) Operating Temp. Range Rated Voltage 1mΩ steps ±100(R) ±50(Q) ±100(R) ±50(Q) ±100(Q) ±50(Q) ±100(R) ±50(Q) ±100(R) ±50(Q) M= -55 C~155 C, C= -55 C~175 C Power x Resistance Packaging 5,000 pcs/reel 4,000 pcs/reel 2,000 pcs/reel Long Side Electrode Type WKL0508 WKL0612 WKL0815 WKL1020 WKL1225 WKL0830 WKL1530 WKL1836 WKL2043 Metric Size Power 1 W 1 1/2 W 2 W 2 W 3 W 3 W 4 W 4 W 5 W Resistance Range (mω) 1~4 5~200 1,2 3~500 1,2 3~500 1,2 3~500 1,2 3~500 1,2 3~500 1,2 3~500 1,2 3~500 1,2 3~500 % (code) ±0.5(D), ±0.5(D), ±0.5(D), ±0.5(D), ±0.5(D), ±0.5(D), ±0.5(D), ±0.5(D), ±0.5(D), Resistance Offering 1mΩ steps TCR ppm/ C (code) ±100 (R) ±50(Q) ±100 (R) ±50(Q) ±100 (R) ±50(Q) ±100 (R) ±50(Q) ±100 (R) ±50(Q) ±100 (R) ±50(Q) ±100 (R) ±50(Q) ±100 (R) ±50(Q) ±100 (R) ±50(Q) Operating Temp. Range Rated Voltage M=-55 C~+155 C, C= -55 C~+175 C Power x Resistance Packaging 5,000 pcs/reel 4,000 pcs/reel 2,000 pcs/reel Contact Information E mail: sales@thin film.com Phone: 1 (507) Contact Information sales@thin-film.com Phone: 1 (507)

13 Thin Film Thin Film Technology Corp Non-wrapped Electrodes 1: Alumina Ceramic 2: Metal Foil Resistor 3: Copper terminal 4: Passivation Coating Why choose non-wrapped electrodes: While the non-wrapped electrode WKL series has the same specifications as the wrapped electrode WEL series, it also exhibits additional benefits. Non-wrapped electrodes allow for an almost linear current flow through the resistor. Using a non-wrapped electrode CSR also eliminates parasitic resistance due to the termination, eliminating 90 angles and reduces equivalent series inductance. This is also a space saving option as it allows for a smaller footprint on the PCB. Alumina substrate Resistive thin film Termination Land pad PC board Passivation layer Product Dimensions and Recommended Land Patterns: Part Number Electrode Type Resistance Range Component Dimensions (inches) Land Pattern Dimensions (inches) L W A T P W D WKL0805 A 4mΩ~500mΩ WKL1206 A 3mΩ~9mΩ mΩ~500mΩ WKL2010 A 5mΩ~500mΩ WKL2512 A 5mΩ~500mΩ 0.248± ± WKL4320 A 5mΩ~500mΩ 0.433± ± ± WKL0508 B 1mΩ~200mΩ WKL0612 B 1mΩ, 2mΩ 0.057± mΩ~500mΩ WKL0815 B 1mΩ~500mΩ WKL1020 B 1mΩ~500mΩ WKL1225 B 1mΩ~500mΩ 0.122± ± WKL0830 B 1mΩ~500mΩ 0.098± ± ± WKL1530 B 1mΩ~500mΩ 0.149± ± ± WKL1836 B 1mΩ~500mΩ 0.177± ± ± WKL2043 B 1mΩ~500mΩ 0.197± ± ± Type A: Short Electrode Type B: Long Electrode Voltage Terminal (-) Voltage Terminal (+) Voltage Terminal (-) Voltage Terminal (+) Current Terminal (-) Current Terminal (+) Current Terminal (-) Current Terminal (+) For a complete For a complete listing listing of products of products visit visit Film.com

14 MPA Series 2-Terminal Current Sense Chip Resistor Metal strip construction Epoxy-resin overcoat Anti-sulfur 0603, 0805, 1206, and 2512 English sizes TCR s down to ±75 ppm/ C Resistances of 1mΩ to 15mΩ Power rating up to 3 watts These low resistance, metal strip, current sensing chip resistors exhibit excellent performance with a very low height profile. They are offered with a face (pattern) down construction. They are useful in many applications. Product Designator MPA Power (Watts) Only for 2512 size B = 2W C = 3W 0603 (1608) 0805 (2012) 1206 (3216) 2512 (6432) Temp. Coefficient of Resistance (TCR) D = ±75ppm/ C R = ±100ppm/ C Resistance Value Serial Code Ex. R001 = 1mΩ (4 digits) G = ±2.0% J = ±5.0% A = Wrapped Electrodes (Black) T&R Packaging QTY Type MPA0603 MPA0805 MPA1206 MPAB2512 MPAC2512 Metric Size Power 1/3 W 1/2 W 1 W 2 W 3 W Rated Voltage Power x Resistance Resistance ±1.0%(F), ±5.0%(J) ±1.0%(F), ±2.0%(G), ±5.0%(J) -T5 = 5,000 -T15 = 1,500 Resistance Range (mω) 5mΩ, 10mΩ 2mΩ~10mΩ 1mΩ~15mΩ 1mΩ~3mΩ 4mΩ~10mΩ 1mΩ~3mΩ 4mΩ~10mΩ TCR ppm/ C (code) ±75(D) ±100(R) ±75(D) ±100(R) ±75(D) -55 C~155 C Packaging 5,000 pcs/reel 1,500 pcs/reel Resistance Measurement Schematic Diagram: Recommended PCB Land Pattern: Contact Information E mail: sales@thin film.com Phone: 1 (507) Contact Information sales@thin-film.com Phone: 1 (507)

15 Thin Film Thin Film Technology Corp High purity alumina substrate Thick film resistive element Wrap around electrodes 0201, 0402, 0603, 0805, 1206, 2010, and 2512 English sizes TCR s down to ±100 ppm/ C of ±1.0% & ±5.0% Resistances down to 10mΩ TFEL Series 2-Terminal Current Sense Chip Resistor These high precision, thick film, low resistant chip resistors are constructed on a high grade ceramic body for extreme durability. Utilizing a proprietary thick film resistive element to deliver a wide range of size, power handling and low resistive values to make this series suitable for applications such as game equipment, mobile phones, battery packs, and power supply. Product Designator Temp. Coefficient of Resistance (TCR) Resistance Value Resistance T&R Packaging QTY TFEL 0201 (0603) 0603 (1608) 1206 (3216) 2512 (6432) 0402 (1005) 0805 (2012) 2010 (5025) R = ±100ppm/ C G = ±150ppm/ C W = See Electrical Specifications 4 digits with the first 3 being significant. The last digit specifies the number of zeros. R denotes decimal position as necessary, Jumper = JUMP Ex. R050 = 50mΩ J = ±5.0% -T5 = 5,000 -T10 = 10,000 -T15 = 15,000 Type TFEL0201 TFEL0402 TFEL0603 TFEL0805 TFEL1206 Metric Size 3216 Power 1/10 W 1/8 W 1/4 W Resistance Range (mω) 25mΩ~976mΩ 10mΩ~100mΩ = 1/3 W 100mΩ~976mΩ = 1/2 W 10mΩ~100mΩ = 1/2 W 100mΩ~976mΩ = 3/4 W % (code) ±5.0%(J) ±1.0%(F), ±5.0%(J) 10mΩ ~ 19mΩ N/A N/A 0~+350(W)* 0~+250(W)* N/A 20mΩ ~ 30mΩ 0~+350(W)* 0~+350(W)* 0~+350(W)* 0~+250(W)* 0~+250(W)* TCR ppm/ C (code) 33mΩ ~ 50mΩ 0~+350(W)* 0~+350(W)* 0~+250(W)* ±150(G)* ±100(R) * 51mΩ ~ 100mΩ 0~+350(W)* ±150(G)* ±150(G)* ±100(R) * ±100(R) * 102mΩ ~ 430mΩ N/A 0~+300(W)** 470mΩ ~ 976mΩ N/A ±200(S)** ±200(S)** ±100(R)** ±100(R)** 10mΩ~100mΩ = - 100mΩ~976mΩ = Packaging 15,000 pcs/reel 10,000 pcs/reel 5,000 pcs/reel Type TFEL2010 TFEL2512 Metric Size 6432 Power 1 W 2 W Resistance Range Resistance 20mΩ~976mΩ ( E24 +E96) ±1.0%(F), ±5.0%(J) TCR ppm/ C (code) 20mΩ ~ 47mΩ ±200(S)** ±200(S)** 50mΩ ~ 976mΩ ±100(R)** ±100(R)** Packaging -55 C~+155 C 5,000 pcs/reel * Note: White protective coating with the R value etched in black. (Figure 1) ** Note: Black protective coating with the R value etched in white. (Figure 2) Figure 2 Figure 1 For a complete For a complete listing listing of products of products visit visit Film.com

16 MPC Series 2-Terminal Current Sense Chip Resistor Metal strip construction Molded epoxy cover Anti-sulfur 0402, 0603, 0805, and 1206 English sizes TCR s down to ±50 ppm/ C Power rating up to 1 watt Resistances of 2mΩ to 20mΩ AEC-Q200 automotive compliant These low resistance, metal strip, current sensing chip resistors exhibit excellent performance with a very low height profile. They are offered with a face (pattern) down construction. They are useful in many applications. Product Designator Temp. Coefficient of Resistance (TCR) Resistance Value Serial Code Automotive Grade T&R Packaging QTY MPC 0402 (1005) 0603 (1608) 0805 (2012) 1206 (3216) Q = ±50ppm/ C R = ±100ppm/ C G = ±150ppm/ C Ex. R001 = 1mΩ (4 digits) G = ±2.0% F = Face Down A = Automotive AEC-Q200 Leave blank for non AEC-Q200 -T5 = 5,000 -T10 = 10,000 Dimensions Inch (mm) Resistance Values (mω) L W T A 0402 (1005) 5~ (1.00±0.10) (0.50±0.10) (0.40±0.10) (0.20±0.10) 0603 (1608) 2 2.5~ ±0.009 (1.60±0.25) 0.031±0.009 (0.80±0.25) 0.016±0.009 (0.40±0.25) (0.45±0.20) (0.35±0.20) 0805 (2012) 2 3~ ±0.009 (2.00±0.25) 0.049±0.009 (1.25±0.25) 0.016±0.009 (0.40±0.25) (0.60±0.20) (0.40±0.20) ±0.012 (1.05±0.30) 1206 (3216) ±0.009 (3.20±0.25) 0.062±0.009 (1.60±0.25) 0.016±0.009 (0.40±0.25) 0.031±0.012 (0.80±0.30) 4~ ±0.012 (0.60±0.30) Type MPC0402 MPC0603 MPC0805 MPC1206 Metric Size Power 3/10 W 3/10 W 1/2 W 1 W Rated Voltage Power x Resistance Resistance ±1.0%(F) ±2.5%(G) ±1.0%(F) ±1.0%(F), ±2.0%(G) ±1.0%(F) ±1.0%(F), ±2.0%(G) ±1.0%(F) Resistance Range (mω) 5mΩ~10mΩ 2mΩ~10mΩ 4mΩ, 5mΩ 6mΩ~20mΩ 2mΩ, 3mΩ 4mΩ, 5mΩ 6mΩ~20mΩ 2mΩ, 3mΩ 4mΩ, 5mΩ 6mΩ~20mΩ TCR ppm/ C (code) ±100(R) ±150(G) ±100(R) ±150(G) ±100(R) ±50(Q) -55 C~155 C Packaging 10,000 pcs/reel 5,000 pcs/reel Contact Information E mail: sales@thin film.com Phone: 1 (507) Contact Information sales@thin-film.com Phone: 1 (507)

17 Thin Film Thin Film Technology Corp Metal strip construction Molded epoxy cover Anti-sulfur 0603 and 0805 English sizes Maximum current of 50 Amps Resistance 0.2mΩ Max. Low profile AEC-Q200 automotive compliant MPC Series 2-Terminal Ultra High Current Jumper These high current, metal strip, jumper chip resistors exhibit excellent performance with a very low height profile. They are useful in many jumper applications where high current withstand and high durability are required. Product Designator Jumper Element Resistance Value Serial Code Automotive Grade T&R Packaging QTY MPC 0603 (1608) 0805 (2012) C = Cu Alloy JUMP = Jumper, 0Ω F = Face Down A = Automotive AEC-Q200 Leave Blank for Non AEC-Q200 -T5 = 5,000 Type MPC0603CJUMP MPC0805CJUMP Metric Size Max. Current 26 A 50 A Resistance Value Packaging 0.2mΩ max. -55 C~+170 C 5,000 pcs/reel Metal strip construction Molded epoxy cover Anti-sulfur 0603 and 0805 English sizes Maximum current of 10 Amps Resistance 5mΩ max. Low profile AEC-Q200 automotive compliant LPC Series 2-Terminal High Current Jumper These high current, metal strip, jumper chip resistors exhibit excellent performance with a very low height profile. They are useful in many jumper applications where high current withstand and high durability are required. Product Designator Jumper Element Resistance Value Serial Code Automotive Grade T&R Packaging QTY LPC 0603 (1608) 0805 (2012) C = Cu Alloy JUMP = Jumper, 0Ω F = Face Down A= Automotive AEC-Q200 Leave Blank for Non AEC-Q200 -T5 = 5,000 Type LPC0603CJUMP LPC0805CJUMP Metric Size Max. Current 7.75 A 10 A Resistance Value Packaging 5mΩ max. -55 C~+170 C 5,000 pcs/reel For a complete For a complete listing listing of products of products visit visit Film.com

18 TF Series Precision Thin Film Chip Resistor High purity alumina substrate Ni alloy thin-film resistive element Wrap around electrodes 0201, 0402, 0603, 0805, 1206, 1210, 2010, and 2512 English sizes TCR s down to ±5 ppm/ C Resistance down to 4.7Ω available AEC-Q200 available These precision chip resistors offer excellent performance and tolerance in TCR, current noise, and linearity for high frequency circuit applications and other applications requiring precision and stability. Also, these are now available with AEC-Q200 qualifications. High volume manufacturing allows for lower costs for the customer. Product Designator Power Temp. Coefficient of Resistance (TCR) Resistance Value Resistance T&R Packaging QTY TF 0201 (0603) 0402 (1005) 0603 (1608) 0805 (2012) 1206 (3216) 1210 (2632) 2010 (5025) 2512 (6432) H = Hi Power L = Normal Power * M = ±5ppm/ C Y = ±10ppm/ C E = ±25ppm/ C Q = ±50ppm/ C 4 digits with the first 3 being significant. The last digit specifies the number of zeros. R denotes decimal position as necessary Ex. 10R0 = 10Ω T = ±0.01%** A = ±0.05%** B = ±0.10% C = ±0.25% D = ±0.50% F = ±1.00% -T4 = 4,000 -T5 = 5,000 -T10 = 10,000 -T15 = 15,000 (Refer to Electrical Table) * Note 2: TCR of ±5ppm(M) and ±10ppm(Y) are only offered in the H Power Code. TCR of ±25ppm(E) and ±50ppm Q) are offered in both L and H Power Code, see electrical specifications for power specifications for power ratings. ** Note 3: Confirm availability of ±0.01% & ±0.05% tolerance with TFT prior to ordering. Dimension 0201 (0603) 0402 (1005) 0603 (1608) 0805 (2012) 1206 (3216) 1210 (2632) 2010 (5025) 2512 (6432) L ± W ± H T ± ± ±0.010 All di- T Thin Film Technology Corp. was founded on the production of Thin Film Resistive materials. TFT has been producing various products using Nickel Chromium (NiCr) sputtered film since Years of knowledge and experience have culminated in the most economical and reliable Thin Film Resistor to date. The TF Series uses cutting edge in-line sputtering technology and trade secret atmospheric annealing to meet a wide range of TCRs and ultra tight tolerances, while exhibiting ultra stability over full load life and temperature cycling. These NiCr resistors utilize custom etch patterning and micro laser trimming to ensure maximum performance. Nickel Chromium is an ideal resistive material when low TCR and tighter tolerances are required. With sizes as small as 0201 and as large as 2512, TFT is able to accommodate any application with volume production. Current applications include Automotive, Test and Measure, Consumer Devices, Industrial Equipment and Medical Instrumentation. Thin Film Technology Corp. is the premier brand in Thin Film Resistive products with one of the largest offerings, Best Price and Lead Times. Covering the full E-92 range of resistance values makes the TF Series the choice in NiCr Thin Film Resistors. Contact TFT today for volume pricing and sample quantities Contact Information E mail: sales@thin film.com Phone: 1 (507) Contact Information sales@thin-film.com Phone: 1 (507)

19 Thin Film Thin Film Technology Corp Type TF0201 TF0402 TF0603 Metric Size Power 1/32 W 1/20 W 1/16 W 1/10 W 1/16 W 1/10 W % (code), ±0.5(D), ±0.25(C), ±0.1(B), ±0.05(A), ±0.01(T) Resistance Range 27Ω~12KΩ 27Ω~22KΩ 100Ω~12KΩ 10Ω~255KΩ 10Ω~20KΩ 10Ω~10KΩ 10Ω~100KΩ 4.7Ω~1MΩ 4.7Ω~680KΩ 4.7Ω~100KΩ 4.7Ω~50KΩ Resistance Offering TCR ppm/ C (code) ±25(E) ±50(Q) ±50(Q) ±25(E) ±50(Q) ±25(E) ±10(Y) E-24 + E-192 Values Max. Operating Voltage 15 V 50 V 25 V 50 V 50 V 75 V ±5(M) ±50(Q) ±25(E) ±50(Q) ±25(E) ±10(Y) ±5(M) Max. Overload Voltage 30 V 100 V 50 V 100 V 100 V 150 V -55 C~+155 C Packaging 15,000 pcs/reel 10,000 pcs/reel 5,000 pcs/reel Type TF0805 TF1206 Metric Size Power 1/10 W 1/8 W 1/8 W 1/4 W % (code), ±0.5(D), ±0.25(C), ±0.1(B), ±0.05(A), ±0.01(T) Resistance Range 4.7Ω~2MΩ 4.7Ω~1MΩ 4.7Ω~200KΩ 4.7Ω~100KΩ 4.7Ω~2.49MΩ 4.7Ω~1MΩ 4.7Ω~300KΩ 4.7Ω~150KΩ Resistance Offering E-24 + E-192 Values TCR ppm/ C (code) ±50(Q) ±25(E) ±50(Q) ±25(E) ±10(Y) ±5(M) ±50(Q) ±25(E) ±10(Y) ±5(M) Max. Operating Voltage 100 V 150 V 100 V 200 V Max. Overload Voltage 200 V 300 V 200 V 400 V Packaging -55 C~+155 C 5,000 pcs/reel Type TF1210 TF2010 Metric Size Power 1/4 W 2/5 W 1/2 W 3/4 W % (code), ±0.5(D), ±0.25(C), ±0.1(B), ±0.05(A), ±0.01(T) Resistance Range 4.7Ω~2.49MΩ 4.7Ω~400KΩ 4.7Ω~150KΩ 10Ω~1MΩ 4.7Ω~3MΩ 4.7Ω~900KΩ 4.7Ω~360KΩ 10Ω~1.5MΩ Resistance Offering E-24 + E-192 Values TCR ppm/ C (code) ±50(Q) ±25(E) ±10(Y) ±5(M) ±50(Q) ±25(E) ±50(Q) ±25(E) ±10(Y) ±5(M) ±50(Q) ±25(E) Max. Operating Voltage 200 V Max. Overload Voltage 400 V -55 C~+155 C Packaging 5,000 pcs/reel 4,000 pcs/reel Type TF2512 Metric Size 6432 Power 3/4 W 1 W % (code), ±0.5(D), ±0.25(C), ±0.1(B), ±0.05(A), ±0.01(T) Resistance Range 4.7Ω~3MΩ 4.7Ω~1.5MΩ 4.7Ω~600KΩ 10Ω~1.5MΩ Resistance Offering E-24 + E-192 Values TCR ppm/ C (code) ±50(Q) ±25(E) ±10(Y) ±5(M) ±50(Q) ±25(E) Max. Operating Voltage 200 V Max. Overload Voltage 400 V -55 C~+155 C Packaging 4,000 pcs/reel For a complete For a complete listing listing of products of products visit visit Film.com

20 AF Series Tantalum Nitride Chip Resistor High purity alumina substrate Tantalum Nitride resistive element Wrap around electrodes Anti-sulfur (ASTM B09-95) 0402, 0603, 0805, and 1206 English sizes TCR s down to ±10 ppm/ C Resistance down to 10Ω available AEC-Q200 automotive compliant These AF Series precision chip resistors are AEC Q200 qualified, sulfur resistant, offer excellent performance and tolerance in TCR, current noise, and power handling beyond standard thin film and other applications requiring precision and stability. They are perfect for demanding applications where high reliability and sulfur resistance is a must, such as automotive applications. High volume manufacturing allows for lower costs for the customer. Product Designator Internal Code Temp. Coefficient of Resistance (TCR) Resistance Value Resistance T&R Packaging QTY AF 0402 (1005) 0603 (1608) 0805 (2012) 1206 (3216) A Y = ±10ppm/ C X = ±15ppm/ C E = ±25ppm/ C Q = ±50ppm/ C 4 digits with the first 3 being significant. The last digit specifies the number of zeros. R denotes decimal position as necessary Ex. 10R0 = 10Ω A = ±0.05% B = ±0.10% C = ±0.25% D = ±0.50% F = ±1.00% -T5 = 5,000 -T10 = 10,000 (Refer to Electrical Table) Dimension 0402 (1005) 0603 (1608) 0805 (2012) 1206 (3216) L W H T T Reliability Specifications: Test Test Method All dimensions are shown Specification in inches, Metric case sizes are shown in parenthesis. Short time overload (S.T.O.L) Permanent resistance change after a 5 second application of a voltage 2.5 times RCWV or the DR/R max. ±(0.1%+0.02W) IEC maximum overload voltage specified in the above list, whichever is less. Resistance to soldering heat (R.S.H) AEC Q Un-mounted chips completely immersed for 10±1second in a SAC solder bath at 260 ± 5ºC Thermal Shock Test 55 C to 125 / dwell time 15min/ max. transfer time 20sec MIL-STD-202 Method cycles Bias Humidity AEC Q200-7 Load Life IEC Operational Life AEC Q200-8 MIL-STD High Temperature Exposure AEC-Q200-3 Moisture Resistance AEC-Q200-6 MIL-STD-202 Method 106 Mechanical Shock MIL-STD-202 Method 213 Vibration MIL-STD-202 Method /-0 hours, loaded with 10% rated power in humidity chamber controller at +85 / 85% RH /-0 hours, loaded with RCWV or Vmax in chamber controller 85 ±2ºC, 1.5 hours on and 0.5 hours off 1000 hours at 125±2 C, loaded with rated power continuously , un-powered 65±2 C, 80~100% RH, 10 cycles, 24 hours/ cycle No visible damage D R/R max. ±(0.1%+0.02W) No visible damage DR/R max. ±(0.1%+0.02W) DR/R max. ±(0.1%+0.02W) DR/R max. ±(0.1%+0.02W) DR/R max. ±(0.1%+0.02W) DR/R max. ±(0.1%+0.02W) DR/R max. ±(0.1%+0.02W) 1/2 Sine Pulse / 1500g Peak / Velocity 15.4ft/sec DR/R max. ±(0.1%+0.02W) 5 g's for 20 min, 12 cycles each of 3 orientations DR/R max. ±(0.1%+0.02W) Terminal strength AEC-Q kg for 60s No broken Board flex AEC-Q Bending 2mm for 60 sec DR/R max. ±(0.1%+0.02W) 20 Contact Information sales@thin-film.com Phone: 1 (507)

21 Thin Film Thin Film Technology Corp Type AF0402 AF0603 Metric Size Power 1/16 W 3/20 W % (code) ±0.05(A), ±0.1(B), ±0.25(C), ±0.5(D),, Resistance Range 40Ω~35KΩ 40Ω~130KΩ Resistance Offering TCR ppm/ C (code) E-24, E-96 Values ±10(Y), ±15(X), ±25(E), ±50(Q) Max. Operating Voltage 50 V 75 V Max. Overload Voltage 100 V 150 V -55 C~+155 C Packaging 10,000 pcs/reel 5,000 pcs/reel Type AF0805 AF1206 Metric Size Power 1/5 W 2/5 W % (code) ±0.05(A), ±0.1(B), ±0.25(C), ±0.5(D), ±1.0 (F) Resistance Range 10Ω~350KΩ 10Ω~1MΩ Resistance Offering TCR ppm/ C (code) E-24, E-96 Values ±10(Y), ±15(X), ±25(E), ±50(Q) Max. Operating Voltage 100 V 200 V Max. Overload Voltage 200 V 400 V Packaging -55 C~+155 C 5,000 pcs/reel The AEC-Q200 qualified AF series is a Tantalum Nitride precision thin film resistor. Unlike Nichrome, TaN resistors are free of the corrosion and reliability problems due to moisture of a typical thin film chip resistor. TFT s AF series is rugged with ultrastable resistive elements. These are resistant to corrosion when exposed to moisture. In NiCr resistors, if exposed, moisture will dissolve the resistive element causing a shift in resistance value. In applications requiring top notch performance in even the most severe environmental conditions, TFT s AF series,is the top choice. Tantalum Nitride, out preforms the competition with tolerances as low as 0.05% and TCR as low as 10ppm per C while holding higher power levels. Precision at its finest in available sizes from 0402 up to For Tantalum Nitride, the material used in TFT s AF thin film process, a layer of tantalum pentoxide is formed on the surface during processing limiting the reaction. An advantage over the competition, this naturally occurring property of TaN film, results in a rugged, ultra-stable, precision chip resistor that is impervious to moisture corrosion. The AF series, using TaN, is perfect for applications such as communications equipment, instrumentation, under the hood automotive applications, aerospace, test equipment, medical, military, industrial controls, and portable electronic devices. For a complete For a complete listing listing of products of products visit visit Film.com 21

22 AS Series Anti-Sulfur Chip Resistor High purity alumina substrate Metal Film resistive element Wrap around electrodes Anti-sulfur (ASTM B09-95) 0402, 0603, 0805, 1206, 1210, 2010, and 2512 English sizes TCR s down to ±25 ppm/ C Resistance down to 4.7Ω available These anti-sulfur, chip resistors, per the ASTM B09-95 standards, offer excellent tolerance in TCR while exhibiting exceptional current noise and linearity performance. This makes these perfect for high frequency circuit applications where high reliability and sulfur resistance is a must, such as automotive applications. High volume manufacturing allows for lower costs for the customer. Product Designator (Metric Size) Temp. Coefficient of Resistance (TCR) Resistance Value Resistance T&R Packaging QTY AS 0402 (1005) 0603 (1608) 0805 (2012) 1206 (3216) 1210 (2632) 2010 (5025) 2512 (6432) E = ±25ppm/ C Q = ±50ppm/ C 4 digits with the first 3 being significant. The last digit specifies the number of zeros. R denotes decimal position as necessary Ex. 10R0 = 10Ω A = ±0.05% B = ±0.10% D = ±0.50% F = ±1.00% -T4 = 4,000 -T5 = 5,000 -T10 = 10,000 (Refer to Electrical Table) Dimension 0402 (1005) 0603 (1608) 0805 (2012) 1206 (3216) 1210 (3225) 2010 (5025) 2512 (6432) L W H T T ± ±0.010 Reliability Specifications: dimensions are shown in inches, All Test Test Method Specification Short Time Overload Applied voltage: 2.5X rated voltage or 2X maximum operating voltage, whichever is less. Test duration: 5 seconds ±0.5% +0.05Ω Load Life Test Temperature: 70 C Applied voltage: rated voltage Test period: 1000 hours with power cycling as follows: 90 min. power ON/ 30 min. power OFF, ±0.5% +0.05Ω Moisture Load Life Test Condition: 40 C/95% RH Applied voltage: rated voltage Test period: 1000 hours with power cycling as follows: 90 min. power ON/30 min. power OFF ±0.5% +0.05Ω Temperature Cycle Repeat 5 cycles as follows: -55 C(30 min.) / Room temp (2 min) / +125 C(30 min.) / Room temp (2 min) ±0.1% +0.05Ω Contact Information E mail: sales@thin film.com Phone: 1 (507) Contact Information sales@thin-film.com Phone: 1 (507)

23 Thin Film Thin Film Technology Corp Type AS0402 AS0603 AS0805 AS1206 Metric Size Power 1/10 W 1/10 W 1/8 W 1/4 W % (code) ±0.05(A), ±0.1(B), ±0.5(D), ±1(F) Resistance Range 10Ω~ 100KΩ 4.7Ω~ 680KΩ 4.7Ω~ 1MΩ Resistance Offering E-24, E-96 Values TCR ppm/ C (code) ±25(E), ±50(Q) Max. Operating Voltage 50 V 75 V 150 V 200 V Max. Overload Voltage 100 V 150 V 300 V 400 V -55 C~+155 C Packaging 10,000 pcs/reel 5,000 pcs/reel Type AS1210 AS2010 AS2512 Metric Size Power 2/5 Watt 3/4 Watt 1 Watt % (code) ±0.05(A), ±0.1(B), ±0.5(D), ±1(F) Resistance Range 10Ω~1MΩ 10Ω~1.5MΩ Resistance Offering E-24 + E-96 Values TCR ppm/ C (code) ±25(E), ±50(Q) Max. Operating Voltage 200 V Max. Overload Voltage 400 V -55 C~+155 C Packaging 5,000 pcs/reel 4,000 pcs/reel Sulfurization is an unfavorable characteristic of both Thick and Thin Film chip resistors whose overall performance and longevity can be impacted by certain environmental conditions. The problem herein lies in the reaction between silver and sulfur. This reaction creates silver sulfide growths, also known as silver flowers, which resemble tin whiskers and are a sign of an underlying sulfurization problem. As the silver terminal base of the chip resistor reacts with the atmospheric sulfur, it begins to etch away at the terminal resulting in the resistor value to shift and eventually failing to open. Silver is used in general purpose resistor because it can form a very effective terminal base while remaining relatively inexpensive. TFT prevents against sulfurization in two ways: In series such as the AS and other Thin Film anti-sulfur series, gold or copper terminals are used instead of silver which effectively negates these effects. In series such as the TFA and TFAS as well as other anti-sulfur Thick Film Resistors, a proprietary double coating of NiCr is deposited over the Silver terminal to protect it from atmospheric sulfur, see figures below. These methods comply with ASTM-809B and have passed the testing to 105 C for 1000 hours with the atmospheric concentration of sulfur at 1000 ppm. This makes these resistors the ideal choice for Automotive, Server, Computing, Industrial, Outdoor, and Volcanic Region electronic devices. Figure 1. Silver sulfide crystal growth at the terminal of a thick film resistor For a complete For a complete listing listing of products of products visit visit Film.com

24 SRN Series Thin Film Resistor Network High purity alumina substrate Metal Film resistive element Convex electrode style 0612 English size Four resistors per package Low profile: 0.45±0.05mm thickness Resistance tolerance down to ±0.1% Relative tolerance down to ±0.05% (matching) Absolute TCR down to ±25ppm/ C Relative TCR down to ±5ppm/ C (tracking) These surface mount resistor networks feature convex style electrodes and thin film resistive elements. Because all of the resistors are fabricated together using thin film processing, these networks exhibit tight ratio tracking and TCR tracking tolerances that are difficult to achieve by using individual discrete resistors. These resistor networks also exhibit -30dB or better noise characteristics and are ideal for LCD touch screen display controllers. Product Designator Absolute Resistance Resistance Ratio Resistance Value Absolute TCR TCR Tracking T&R Packaging QTY SRN 0612 (1632) B = ±0.10% C = ±0.25% D = ±0.50% A = ±0.05% 3 digits with the first 2 being significant. The last digit specifies the number of zeros. R denotes decimal position as necessary Ex. 682 = 6.8kΩ E = ±25ppm/ C Q = ±50ppm/ C C = ±5ppm/ C -T5 = 5,000 Dimension 0612 (1632) Dimension 0612 (1632) W (1.50±0.15) A (0.60±0.10) L (3.20±0.15) B (0.40±0.15) P (0.80±0.10) G (0.30±0.15) C (0.40±0.10) T (0.55±0.10) Package Type All dimensions are shown in inches, Metric SRN0612 Dimensions in mm (L x W x H) 1.50 x 3.20 x 0.55 (1632) Resistance Range % (code) Tracking (code) TCR ppm/ C (code) TCR Tracking ppm/ C (code) 47Ω~200KΩ ±1%(F), ± 0.5%(D), ±0.25%(C), ±0.1%(B) ±0.05%(A) ±25(E), ±50(Q) ±5(C) Max. Dissipation at T amb = 70 C 1/10 W Max. Operation Voltage Max. Overload Voltage Packaging 75 V 150 V -55 C~+155 C 5,000 pcs/reel Contact Information E mail: sales@thin film.com Phone: 1 (507) Contact Information sales@thin-film.com Phone: 1 (507)

25 Thin Film Thin Film Technology Corp High purity alumina ceramic rod Cylindrical cap electrodes 0207 and 0204 sizes TCR s down to ±25 ppm/ C Resistance down to 0.2Ω available AEC-Q200 automotive compliant MF Series Thin Film MELF Resistor These high precision MELF resistors offer excellent performance and tolerance in TCR, current noise, and other applications requiring precision and stability. High volume manufacturing allows for lower costs for the customer. Product Designator Power Temp. Coefficient of Resistance (TCR) Resistance Value Resistance Automotive Grade T&R Packaging QTY MF H = High Power** L = Normal Power E = ±25ppm/ C Q = ±50ppm/ C 4 digits with the first 3 being significant. The last digit specifies the number of zeros. R denotes decimal position as necessary Ex = 100kΩ B = ±0.10% C = ±0.25% D = ±0.50% F = ±1.00% A = Automotive AEC-Q200 Leave blank for non AEC-Q200 -T2 = 2,000 -T3 = 3,000 Protective insulation Laser trimmed Electrode cap Alumina ceramic rod Dimensions L D K 0.232±0.007 (5.90±0.20) 0.086±0.003 (2.20±0.10) 0.055±0.003 (1.40±0.10) 0.137±0.003 (3.50±0.10) 0.055±0.005 (1.40±0.15) 0.035±0.003 (0.90±0.10) Color code rings Resistive element Weight (g) 1000 pieces Item MF0207 MF0204 All dimensions are shown in inches. Metric case sizes are shown in parenthesis. % (code) ±0.1(B), ±0.25(C), ±0.5(D), * Power 1 W 1/2 W 2/5 W 1/4 W TCR ppm/ C (code) ±50(Q)* ±25(E) ±50(Q) ±25(E) ±50(Q) ±25(E) ±50(Q) ±25(E) Resistance Range 0.2Ω~1MΩ 10Ω~1MΩ 0.2Ω~1MΩ 10Ω~1MΩ 0.2Ω~1MΩ 10Ω~1MΩ 0.2Ω~1MΩ 10Ω~1MΩ Max. Operating Voltage 350 V 300 V 200 V 200 V Max. Overload Voltage 700 V 600 V 400 V 400 V -55 C~+155 C -55 C~+125 C -55 C~+155 C -55 C~+125 C Packaging *Note: 0.2Ω~10Ω is available only in ±1.0% with ±50ppm Pulse Load Performance: Single Pulse 2,000 pcs/reel 3,000 pcs/reel MF0204H MF0207H MF0204L MF0207L Continuous Pulse Continuous load is a pulse period generated by the repetitive rectangular pulse amplitude, the applied power dissipation as at a rated power of 70 C. Permissible the resistance to be varied by ± (0.5% R Ω). 50 rectangular pulse amplitudes are applied to the component at intervals of 60 seconds, permissible the resistance to be varied by ±(0.5% R Ω). MF0204H MF0207H MF0204L MF0207L For a complete For a complete listing listing of products of products visit visit Film.com

26 TFA Series Automotive Grade Thick Film Chip Resistor High purity alumina substrate Highly reliable and stable thick film resistive element Wrap around electrodes Anti-sulfur 0201, 0402, 0603, 0805, 1206, 1210, 1218, 2010, and 2512 English sizes Resistances between 1Ω ~ 10MΩ +Jumper of 1.0% or 5.0% TCR s down to ±100ppm/ C AEC-Q200 automotive compliant These precision chip resistors are Automotive grade AEC Q-200 compliant and sulfur resistant making them an excellent choice for automotive applications, telecom applications, and EDP computer applications. High volume manufacturing allows for lower costs for the customer. Product Designator Temp. Coefficient of Resistance (TCR) Resistance Value Resistance T&R Packaging Quantity TFA 0201 (0603) 0402 (1005) 0603 (1608) 0805 (2012) 1206 (3216) 1210 (2632) 1218 (3248) 2010 (5025) 2512 (6432) R = ±100ppm/ C S = ±200ppm/ C W = see electrical table 4 digits with the first 3 being significant. The last digit specifies the number of zeros. R denotes decimal position as necessary Ex = 1kΩ JUMP = Jumper J = ±5.0% -T3 = 3,000 -T4 = 4,000 -T5 = 5,000 -T10 = 10,000 -T15 = 15,000 -T20 = 20,000 (Refer to Electrical Table) Dimension 0201 (0603) 0402 (1005) 0603 (1608) 0805 (2012) 1206 (3216) 1210 (3226) 1218 (3248) 2010 (5025) 2512 (6432) L W H T1 T ± ± ± Reliability Specifications: ± ±0.010 Test Test Method Specification ± ± ± ±0.010 Short Time Overload Resistance to Soldering Heat Load Life Moisture Load Life Temperature Cycle High Temperature Exposure Mechanical Shock Board Flex Terminal Strength Vibration ESD Applied voltage: 2.5X rated voltage or 2X maximum operating voltage, whichever is less. Test duration: 5 seconds MIL-STD-202, Method 210 Dip into 270 C solder bath until fully immersed, 10 ±1 seconds MIL-STD-202, Method 210 Test Temperature: 125 C, Applied power: 35% of operational power rated voltage Test period: 1000 hours MIL-STD-202, Method 103 Test Condition: 85 C/85 RH, Applied power: 10% or rated power Test period: 1000 hours with power cycling as follows: JESD22, Method JA C~155 C, 5-10 minute dwell, 1,000 cycles MIL-STD-202, Method 108 Test Temperature: 155 C, No load, Test period: 1000 hours MIL-STD-202, Method 213 1/2 sine pulse, 1,500 peak, Velocity 15.4 ft./second AEC-Q Resistor mounted on 90mm FR4 PCB, 2mm bend for 10 seconds AEC-Q Force of 1kg, Test time: 60 ±1 second MIL-STD-202, Method G s for 20 minutes, 3 orientations, 12 cycles AEC-Q Test contact 1.0KV (0402 size tested with 0.5KV) ±0.5% +0.05Ω ±0.5% +0.05Ω ±1.0% +0.05Ω ±1.0% +0.05Ω ±0.5% +0.05Ω ±1.0% +0.05Ω Within specified product tolerance ±1.0% +0.05Ω No damage or removal of the termination ±1.0% +0.05Ω ±1.0% +0.05Ω Contact Information E mail: sales@thin film.com Phone: 1 (507) Contact Information sales@thin-film.com Phone: 1 (507)

27 Thin Film Thin Film Technology Corp Type TFA0201 TFA0402 TFA0603 TFA0805 TFA1206 Metric Size Power 1/20 W 1/16 W 1/10 W 1/8 W 1/4 W Resistance Range 1Ω~3.3MΩ 1Ω~10MΩ 1Ω~10MΩ + Jumper (0Ω) % (code) E-96 +E-24 + Jumper Values = E-24 Values ±5.0(J) E-24 Values = or ±5.0(J) E-96 Values +Jumper = TCR ppm/ C (code) 10Ω~10MΩ = ±200(S) 1Ω~9.76Ω = +600~-200(W) Less than 10Ω = -200 / +400(W) 10Ω to 1MΩ = ±100(R) Greater than 1MΩ = ±200(S) Max. Operating Voltage 25 V 50 V 50 V 150 V 200 V Max. Overload Voltage 50 V 100 V 100 V 300 V 400 V -55 C~+125 C -55 C~+155 C Packaging 15,000 pcs/reel 10,000 pcs/reel 5,000 pcs/reel 10,000 pcs/reel 20,000 pcs/reel Type TFA1210 TFA1218 TFA2010 TFA2512 Metric Size Power 1/2 W 1 W 1/2 W 1 W Resistance Range % (code) TCR ppm/ C (code) 1Ω~10MΩ + Jumper (0Ω) E-24 Values = or ±5.0(J) E-96 Values +Jumper = Less than 10Ω = -200 / +400(W) 10Ω to 1MΩ = ±100(R) Greater than 1MΩ = ±200(S) Max. Operating Voltage 200 V 200 V 250 V Max. Overload Voltage 400 V 400 V 500 V -55 C~+155 C Packaging 10,000 pcs/reel 5,000 pcs/reel 10,000 pcs/reel 20,000 pcs/reel 3,000 pcs/reel 4,000 pcs/reel Conditions for Jumper: Type TFA0201 TFA0402 TFA0603 TFA0805 TFA1206 TFA1210 TFA1218 TFA2010 TFA2512 Power Rating at 70 C Resistance 1/20 W 1/16 W 1/10 W 1/8 W 1/4 W 1/2 W 1 W 1/2 W 1 W MAX 0.050Ω (50mΩ) Rated Current 1 A 1.5 A 2 A 3 A 4.5 A 3.2 A 4.5 A Peak Current Operating Temp. Range 2.5 A 2 A 3 A 3.5 A 5 A 7.5 A 11 A 8 A 11 A -55 C~+125 C, -55 C~+155 C For a complete For a complete listing listing of products of products visit visit Film.com

28 TFAS Series High Grade Anti-Sulfur Thick Film Chip Resistor High purity alumina substrate Highly reliable and stable thick film resistive element Wrap around electrodes Anti-sulfur 0201, 0402, 0603, 0805, 1206, 1210, 1218, 2010, and 2512 English sizes Resistances between 1Ω ~10MΩ +Jumper of 1% or 5% TCR s down to ±100ppm/ C AEC-Q200 automotive compliant These precision chip resistors are Automotive grade AEC Q-200 compliant and high grade sulfur resistant making them an excellent choice for automotive applications, telecom applications, and EDP computer applications. Ideal for high temperature sulfur resistivity in the most extreme environments. Product Designator Temp. Coefficient of Resistance (TCR) Resistance Value Resistance T&R Packaging QTY TFAS 0402 (1005) 0603 (1608) 0805 (2012) 1206 (3216) 1210 (3226) 2010 (5025) 2512 (6432) R = ±100ppm/ C S = ±200ppm/ C W = see electrical table 4 digits with the first 3 being significant. The last digit specifies the number of zeros. R denotes decimal position as necessary Ex = 1kΩ JUMP = Jumper J = ±5.0% -T4 = 4,000 -T5 = 5,000 -T10 = 10,000 -T20 = 20,000 (Refer to Electrical Table) Dimension 0402 (1005) 0603 (1608) 0805 (2012) 1206 (3216) 1210 (3226) 2010 (5025) 2512 (6432) L W H T ± ±0.010 T Reliability Specifications: ± ±0.010 All dimensions are shown in inches, Test Test Method Specification Short Time Overload Resistance to Soldering Heat Load Life Moisture Load Life Temperature Cycle High Temperature Exposure Mechanical Shock Board Flex Terminal Strength Vibration ESD Applied voltage: 2.5X rated voltage or 2X maximum operating voltage, whichever is less. Test duration: 5 seconds MIL-STD-202, Method 210 Dip into 270 C solder bath until fully immersed, 10 ±1 seconds MIL-STD-202, Method 210 Test Temperature: 125 C, Applied power: 35% of operational power rated voltage, Test period: 1000 hours MIL-STD-202, Method 103 Test Condition: 85 C/85 RH, Applied power: 10% or rated power Test period: 1000 hours with power cycling as follows: JESD22, Method JA C~155 C, 5-10 minute dwell, 1,000 cycles MIL-STD-202, Method 108 Test Temperature: 155 C, No load, Test period: 1000 hours MIL-STD-202, Method 213 1/2 sine pulse, 1,500 peak, Velocity 15.4 ft./second AEC-Q Resistor mounted on 90mm FR4 PCB, 2mm bend for 10 seconds AEC-Q Force of 1Kg, Test time: 60 ±1 second MIL-STD-202, Method G s for 20 minutes, 3 orientations, 12 cycles AEC-Q Test contact 1.0KV (0402 size tested with 0.5KV) ±0.5% +0.05Ω ±0.5% +0.05Ω ±1.0% +0.05Ω ±1.0% +0.05Ω ±0.5% +0.05Ω ±1.0% +0.05Ω Within specified product tolerance ±1.0% +0.05Ω No damage or removal of the termination ±1.0% +0.05Ω ±1.0% +0.05Ω Contact Information E mail: sales@thin film.com Phone: 1 (507) Contact Information sales@thin-film.com Phone: 1 (507)

29 Thin Film Thin Film Technology Corp Type TFAS0402 TFAS0603 TFAS0805 TFAS1206 TFAS1210 Metric Size Power 1/16 W 1/10 W 1/8 W 1/4 W 1/3 W Resistance Range % (code) TCR ppm/ C (code) 1Ω to 10MΩ + Jumper (0Ω) E-24 Values = or ±5.0(J) E-96 Values +Jumper = Less than 10Ω = -200 / +400(W) 10Ω to 1MΩ = ±100(R) Greater than 1MΩ = ±200(S) Max. Operating Voltage 50 V 75 V 150 V 200 V 200 V Max. Overload Voltage 100 V 150 V 300 V 400 V 400 V -55 C~+155 C Packaging 10,000 pcs/reel 5,000 pcs/reel 10,000 pcs/reel Type TFAS2010 TFAS2512 Metric Size Power 1/2 W 1 W Resistance Range % (code) TCR ppm/ C (code) 1Ω~10MΩ + Jumper (0Ω) E-24 Values = or ±5.0(J) E-96 Values +Jumper = Less than 10Ω = ±200(W) 10Ω to 1MΩ = ±100(R) Greater than 1MΩ = ±200(S) Max. Operating Voltage 200 V 250 V Max. Overload Voltage 400 V 500 V Packaging -55 C~+155 C 4,000 pcs/reel Conditions for Jumper: Type TFA0402 TFA0603 TFA0805 TFA1206 TFA1210 TFA2010 TFA2512 Power Rating at 70 C 1/16 W 1/10 W 1/8 W 1/4 W 1/3 W 1/2 W 1 W Resistance MAX 0.050Ω (50mΩ) Rated Current 1 A 1.5 A 2 A 3 A 3.2 A 4.5 A Peak Current 2 A 3 A 3.5 A 5 A 6 A 8 A 11 A -55 C~155 C For a complete For a complete listing listing of products of products visit visit Film.com

30 TFG Series Total Lead Free Thick Film Chip Resistor High purity alumina substrate Thick film resistive element Wrap around electrodes RoHS 2011/65/EU compliant RoHS 2016 ready (RoHS compliant and Pb Free, with no exemptions 100% matte tin over Ni terminations) 01005, 0201, 0402, 0603, 0805, 1206, 1210, 1218, 2010, 2512 English sizes s of ±1.0% and ±5.0% Resistances from 1Ω to 10MΩ available These general purpose thick film chip resistors are completely lead free with no RoHS exemptions. This is a solution for the possible expiration of the 7C exemption. These are constructed on a high grade ceramic body for extreme durability. Utilizing a proprietary thick film resistive element to deliver a wide range of size, power handling and resistive values to make this series suitable for most applications. Product Designator Temp. Coefficient of Resistance (TCR) Resistance Value Resistance T&R Packaging QTY TFG use 0100 (0402) 0402 (1005) 0201 (0603) 0805 (2012) 0603 (1608) 1210 (3226) 1206 (3216) 2010 (5025) 1218 (3248) 2512 (6432) R = 100 ppm/ C S = 200 ppm/ C W = See Charts 4 digits with the first 3 being significant. The last digit specifies the number of zeros. R denotes decimal position as necessary Ex = 100kΩ JUMP = Jumper J = ±5.0% -T5 = 5,000 -T10 = 10,000 -T15 = 15,000 -T20 = 20,000 (Refer to Electrical Table) Dimension 0100 (0402) 0201 (0603) 0402 (1005) 0603 (1608) 0805 (2012) 1206 (3216) 1210 (3226) 1218 (3248) 2010 (5025) 2512 (6432) L ± ± W ± ± H ± ± T ± ± ± ±0.010 T ± ±0.010 All dimensions are shown in inches, Metric Type TFG0100 TFG0201 TFG0402 TFG0603 TFG0805 Power 1/32 W 1/20 W 1/16 W 1/10 W 1/8 W ± ±0.010 % (Code) E-24 Values = or ±5.0(J), E-96 Values + Jumper = Resistance Range 4.7~1M 1~10M, + Jumper (0Ω) TCR ppm/ C 4.7Ω-9.1Ω= -200/+600(W) 10Ω-91Ω = ±300(W) 100Ω-1MΩ = ±200(S) 1Ω-9.76Ω = 100~+80(W) 10Ω-97.6Ω = 0~+600(W) 100Ω-10MΩ = ±200(S) 1Ω-10Ω = -300/+500(W) 10.2Ω to 976kΩ = ±100(R) for 1% tol. parts ±200(S) for 5% tol. Parts 1MΩ or greater = ±300(W) 1Ω-10Ω = -300/+500(W) 10.2Ω to 976kΩ = ±100(R) for 1% tol. parts, ±200(S) for 5% tol. Parts, 1MΩ or greater = ±200(S) Max. Operating Voltage 15 V 25 V 50 V 150 V Max. Overload Voltage 30 V 50 V 100 V 300 V Packaging 20,000 pcs/reel 15,000 pcs/reel 10,000 pcs/reel 5,000 pcs/reel Type TFG1206 TFG1210 TFG1218 TFG2010 TFG2512 Power 1/4 W 1/3 W 1 W 1/2 W 1 W % (Code) Resistance Range E-24 Values = or ±5.0(J), E-96 Values + Jumper = 1~10M, + Jumper (0Ω) TCR ppm/ C 1Ω-10Ω = -300/+500(W) 10.2Ω to 976kΩ = ±100 (R) for 1% tol. parts, ±200 (S) for 5% tol. Parts 1MΩ or greater = ±200 (S) 1Ω-10Ω = ±200(S) 10.2Ω or greater = ±100(R) Max. Operating Voltage 200 V 250 V Max. Overload Voltage 400 V 500 V Packaging 5,000 pcs/reel Contact Information E mail: sales@thin film.com Phone: 1 (507) Contact Information sales@thin-film.com Phone: 1 (507)

31 Thin Film Thin Film Technology Corp High purity alumina substrate Thick film resistive element Wrap around electrodes 100% matte Sn over Ni terminations (RoHS compliant and 01005, 0201, 0402, 0603, 0805, 1206, 1210, 1218, 2010, 2512 English sizes s of ±1.0% and ±5.0% Resistances from 1Ω to 10MΩ available TFGL Series General Purpose Thick Film Chip Resistor These general purpose thick film chip resistors are constructed on a high grade ceramic body for extreme durability. Utilizing a proprietary thick film resistive element to deliver a wide range of size, power handling and resistive values to make this series suitable for most applications. Very competitive pricing for all volume levels. Product Temp. Coefficient of Resistance Value Resistance T&R Packaging QTY TFGL use 0100 (0402) 0201 (0603) 0402 (1005) 0603 (1608) 0805 (2012) 1206 (3216) 1210 (3226) 1218 (3248) 2010 (5025) 2512 (6432) R = ±100 ppm/ C S = ±200 ppm/ C W = See Charts 4 digits with the first 3 being significant. The last digit specifies the number of zeros. R denotes decimal position as necessary Ex = 100kΩ JUMP = Jumper J = ±5.0% -T3 = 3,000 -T4 = 4,000 -T5 = 5,000 -T10 = 10,000 -T15 = 15,000 -T20 = 20,000 (Refer to Electrical Table) Dimension 0100 (0402) 0201 (0603) 0402 (1005) 0603 (1608) 0805 (2012) 1206 (3216) 1210 (3226) 1218 (3248) 2010 (5025) 2512 (6432) L W H T1 T ± ± ± ± ± ± ± ± ± ±0.010 Type TFGL0100 TFGL0201 TFGL0402 TFGL0603 TFGL0805 Metric Size Power 1/32 W 1/20 W 1/16 W 1/10 W 1/8 W ± ± ± ±0.010 Resistance Range 4.7Ω~1MΩ +Jumper 1Ω~10MΩ, + Jumper (0Ω) % (code) E-24 Values = or ±5.0(J), E-96 Values + Jumper = TCR ppm/ C (code) 4.7Ω-9.1Ω= -200/+600(W) 10Ω-91Ω = ±300(W) 1Ω-9.76Ω = -200/+600(W) 10Ω-10MΩ = ±200(S) 1Ω-10Ω = -200/+400(W) 10.2Ω to 10MΩ = ±100(R) Max. Operating Voltage 15 V 25 V 50 V 75 V 150 V Max. Overload Voltage 30 V 50 V 100 V 150 V 300 V Packaging 20,000 pcs/reel 15,000 pcs/reel 10,000 pcs/reel 5,000 pcs/reel 5,000 pcs/reel Type TFGL1206 TFGL1210 TFGL1218 TFGL2010 TFGL2512 Metric Size Max Power 1/4 W 1/3 W 1 W 1/2 W 1 W Resistance Range Resistance (code) TCR ppm/ C (code) 1Ω-10Ω = -200/+400(W) 0.2Ω to 10MΩ = ±100(R) 1Ω~10MΩ, + Jumper (0Ω) E-24 Values = or ±5.0(J), E-96 Values + Jumper = 1Ω-10Ω = ±200(S) 10.2Ω or greater = ±100 (R) Max. Operating Voltage 200 V 250 V Max. Overload Voltage 400 V 500 V Packaging 5,000 pcs/reel 3,000 pcs/reel 4,000 pcs/reel - For a complete listing of products visit 31

32 TFP Series High Power Thick Film Chip Resistor High grade ceramic body High purity alumina substrate Reduced size of final equipment Anti-sulfur 0402, 0603, 0805, 1206, 1210, 2010, and 2512 English sizes Resistances from 1Ω to 1MΩ s of ±1.0% and ±5.0% TCR s of ±200 to ±300ppm/ C AEC-Q200 automotive compliant These High Power Chip Resistors are designed for power supply, PDA, digital meters, computers, automotive, battery, and DC-DC power conversion. Product Designator Temp. Coefficient of Resistance (TCR) Resistance Value Resistance Automotive Grade T&R Packaging QTY TFP 0402 (1005) 0603 (1608) 0805 (2012) 1206 (3216) 1210 (3226) 2010 (5025) 2512 (6432) R = ±100 ppm/ C G = ±150 ppm/ C S = ±200 ppm/ C W = See Table 4 digits with the first 3 being significant. The last digit specifies the number of zeros. R denotes decimal position as necessary Ex = 1kΩ JUMP = Jumper J = ±5.0% A = Automotive AEC-Q200 Leave Blank for Non AEC-Q200 -T4 = 4,000 -T5 = 5,000 -T10 = 10,000 (Refer to Electrical Table) Dimension 0402 (0510) 0603 (0816) 0805 (1220) 1206 (1632) 1210 (2632) 2010 (2550) 2512 (3264) L W H T ± ± ±0.010 T ± ± ±0.010 Type TFP0402 TFP0603 TFP0805 TFP1206 TFP1210 TFP2010 TFP2512 Metric Size All dimensions are 3225 shown in inches, 5025 Metric 6432 E-24 Values = case or sizes ±5.0(J) are shown in parenthesis. % (code) E-96 Values = Resistance Range TCR ppm/ C (code) < 10Ω -200/+400(W) 10Ω ±100(R) 1~49.9Ω = +500~-200(W) 51~1MΩ = ±100(R) 1Ω to 1MΩ, plus jumper ±150(G) ±100(R) ±200(S) ±100(R) Max. Dissipation at T amb=70 C 1/8 W 1/4 W 1/2 W 1 W 2 W Max. Operation Voltage 50 V 150 V 200 V 300 V Max. Overload Voltage 100 V 300 V 400 V 500 V ±100(R) -55 C~+155 C TFP Single Pulse Limiting Power Chart Limiting Power (W) Pulse Duration (ms) Contact Information Contact Information E mail: sales@thin film.com sales@thin-film.com Phone: Phone: 1 (507) 1 (507)

33 Thin Film Thin Film Technology Corp High grade ceramic body High purity alumina substrate Reduced size of final equipment Anti-sulfur 0603, 0805, 1206, 1210, 2010, and 2512 English sizes Resistances from 1Ω to 1MΩ s of ±1.0% and ±5.0% TCR s as low as ±100ppm/ C AEC-Q200 automotive compliant TFHP Series Triple Power Thick Film Chip Resistor These Triple High Power Chip Resistors are designed for power supply, PDA, digital meters, computers, medical, automotive, battery, and DC-DC power conversion. Ideal for high pulse power withstand situation in a small form factor package. Product Designator Temp. Coefficient of Resistance (TCR) Resistance Value Resistance Automotive Grade T&R Packaging QTY TFHP 0603 (1608) 0805 (2012) 1206 (3216) 1210 (3226) 2010 (5025) 2512 (6432) R = ±100 ppm/ C G = ±150 ppm/ C S = ±200 ppm/ C W = See Table 4 digits with the first 3 being significant. The last digit specifies the number of zeros. R denotes decimal position as necessary Ex = 100kΩ JUMP = Jumper J = ±5.0% A = Automotive AEC-Q200 Leave blank for non AEC-Q200 -T4 = 4,000 -T5 = 5,000 -T10 = 10,000 (Refer to Electrical Table) Dimension L W H T ± ± ±0.010 T ± ± ±0.010 Item TFHP0603 TFHP0805 TFHP1206 TFHP1210 TFHP2010 TFHP2512 Metric Size Power 1/3 W 1/2 W 3/4 W 3/4 W 1 1/2 W 3 W % (code) ±5.0(J) ±5.0(J) ±5.0(J) ±0.5(D), ±5.0(J), ±5.0(J) ±5.0(J) Resistance Range 1Ω~1MΩ, plus jumper TCR ppm/ C (code) 1Ω~9.76Ω = ±200(S) 10Ω~1MΩ = ±100(R) 1Ω~1MΩ= ±200(S) 1Ω~9.76Ω = ±150(G) 10Ω~1MΩ = ±100(R) 1Ω~1MΩ = ±200(S) 1Ω~1MΩ = ±100(R) 1Ω~1MΩ = ±200(S) 1Ω~49.9Ω = 200~+500(W) 51Ω~1MΩ = 100(R) 1Ω~47Ω = 200~+500(W) 51Ω~1MΩ = ±200(S) 1Ω~1MΩ = ±100(R) 1Ω~1MΩ= ±100(R) 1Ω~1MΩ = ±200(S) Max. Operation Voltage 75 V 200 V 250 V 200 V 200 V 300 V Max. Overload Voltage 125 V 300 V 500 V 400 V 400 V 500 V -55 C~+155 C TFHP Single Pulse Limiting Power Chart 1000 Limiting Power (W) Pulse Duration (ms) For a complete listing of products visit 33

34 TFHV Series Ultra High Voltage Thick Film Chip Resistor High purity alumina substrate Thick film resistive element Special material and design for high working voltage requirements Wrap around electrodes 2010 and 2512 English sizes Resistances from 1MΩ to 16MΩ s of ±1.0%, ±5.0%, and ±20% TCR of ±200 Reduced size of final equipment Operating voltage as high as 4,000V These ultra high voltage thick film chip resistors are designed for measurement instruments, back light inverters, power supply, medical/military equipment, and the automotive industry. Product Designator Temp. Coefficient of Resistance (TCR) Resistance Value Resistance T&R Packaging QTY TFHV 2010 (5025) 2512 (6432) S = ±200 ppm/ C 4 digits with the first 3 being significant. The last digit specifies the number of zeros. R denotes decimal position as necessary Ex = 100kΩ J = ±5.0% M = ±20% -T4 = 4,000 Dimension L W H T1 T (5025) (5.00±0.15) (2.50±0.15) (0.55±0.15) (0.60±0.20) (0.60±0.20) 2512 (6432) (6.30±0.15) (3.20±0.15) (0.55±0.15) (0.50±0.20) (0.60±0.20) All dimensions are shown in inches, Metric Type TFHV2010 TFHV2512 Metric Size Power 1/2 W 1 W Resistance Range 1.0MΩ ~ 16MΩ 4.7MΩ ~ 16MΩ Resistance Offering % (code) TCR ppm/ C (code) E-24 Values, ±5.0(J), ±20(M) ±200(S) Max. Operating Voltage 1,500 V 2,000 V Max. Overload Voltage 3,000 V 4,000 V Packaging -55 C~+125 C 4,000 pcs/reel Contact Information E mail: sales@thin film.com Phone: 1 (507) Contact Information sales@thin-film.com Phone: 1 (507)

35 Thin Film Thin Film Technology Corp High purity alumina substrate Thick film resistive element Special material and design for high working voltage requirements Wrap around electrodes 0603, 0805, 1206, 2010, and 2512 English sizes Resistances from 47Ω to 51MΩ s of ±1.0%, ±2.0% and ±5.0% TCR s as low as ±100ppm/ C Operating voltage as high as 800 V TF V Series High voltage Thick Film Chip Resistor These high voltage thick film chip resistors are designed for use in the automotive industry, power supply, measurements instruments, back light inverters, and medical/military equipment. Designed for high work voltage and pulse with stand applications. Product Designator Temp. Coefficient of Resistance (TCR) Resistance Value Resistance T&R Packaging QTY TFV 0603 (1608) 0805 (2012) 1206 (3216) 2010 (5025) 2512 (6432) R = ±100 ppm/ C S = ±200 ppm/ C W = +500/-200 C 4 digits with the first 3 being significant. The last digit specifies the number of zeros. R denotes decimal position as necessary Ex = 100kΩ G = ± 2.0% J = ±5.0% -T4 = 4,000 -T5 = 5,000 (Refer to Electrical Table) Dimension 0603 (0816) 0805 (2012) 1206 (1632) 2010 (2632) 2512 (3264) L (1.60±0.10) (2.00±0.10) (3.20±0.15) (5.00±0.15) (6.30±0.15) W / ( /-0.05) (1.25±0.10) (1.60±0.15) (2.50±0.15) (3.20±0.15) H (0.45±0.10) (0.55±0.10) (0.55±0.10) (0.55±0.15) (0.55±0.15) T (0.30±0.10) (0.40±0.20) ±0.010 (0.50±0.25) (0.60±0.20) (0.60±0.20) T (0.30±0.10) (0.40±0.20) ±0.010 (0.50±0.25) (0.60±0.20) (0.60±0.20) Type TFV0603 TFV0805 TFV1206 TFV2010 TFV2512 Metric Size Power 1/10 W 1/8 W 1/4 W 1/2 W 1 W Resistance Range 47Ω~10MΩ 47Ω~51MΩ % (code), ±2.0(G), ±5.0(J) 47~10MΩ:, ±2.0(G), ±5.0(J) Greater than 10MΩ: ±5.0(J) +500 / -200(W) 47Ω~97.6Ω TCR ppm/ C (code) ±200(S) 47Ω~464Ω 47Ω~97.6Ω 47Ω~549Ω 100Ω~549Ω ±100(R) 470Ω~10MΩ 100Ω~51MΩ 560Ω~51MΩ Max. Operating Voltage 200 V 400 V 500 V 800 V Max. Overload Voltage 400 V 800 V 1000 V 1600 V -55 C~+125 C Packaging 5,000 pcs/reel 4,000 pcs/reel For a complete For a complete listing listing of products of products visit visit Film.com

36 TFM Series High Resistance Thick Film Chip Resistor High purity alumina substrate Thick film resistive element Wrap around electrodes 0402, 0603, 0805, and 1206 English sizes Resistances from 10MΩ to 100MΩ s of ±1.0% and ±5.0% TCR s of ±200 Reduced size of final equipment Maximum reflow temperature = 260 C ±5 C, MSL = 1 These high resistance thick film chip resistors are designed for power supply, PDA, digital meters, computers and palmtop computers. Product Designator Temp. Coefficient of Resistance (TCR) Resistance Value Resistance T&R Packaging QTY TFM 0402 (1005) 0603 (1608) 0805 (2012) 1206 (3216) S = ±200 ppm/ C W = ±300 ppm/ C 3 digits with the first 2 being significant. The last digit specifies the number of zeros. R denotes decimal position as necessary Ex. 476 = 47MΩ J = ±5.0% -T5 = 5,000 -T10 = 10,000 (Refer to Electrical Table) Dimension 0402 (0510) 0603 (0816) 0805 (2012) 1206 (1632) L (1.00±0.05) (1.60±0.10) (2.00±0.10) (3.10±0.15) W (0.50±0.05) (0.80±0.10) (1.25±0.10) (1.60±0.15) H (0.35±0.05) (0.45±0.15) (0.50±0.15) (0.55±0.10) T (0.20±0.10) (0.30±0.10) (0.40±0.20) ±0.010 (0.50±0.25) T (0.25±0.10) (0.30±0.15) (0.40±0.20) ±0.010 (0.50±0.25) All dimensions are shown in inches, Metric Type TFM0402 TFM0603 TFM0805 TFM1206 Metric Size Power 1/16 W 1/10 W 1/8 W 1/4 W Resistance Range 10MΩ~30MΩ 10MΩ~100MΩ Resistance Offering E-24 Values E-24 or E-96 Values % (code) ±5.0(J), ±5.0(J) TCR ppm/ C (code) ± 300(W) ± 200(S) Max. Operating Voltage 50 V 150 V 200 V Max. Overload Voltage 100 V 300 V 400 V -55 C~+155 C Packaging 10,000 pcs/reel 5,000 pcs/reel Contact Information E mail: sales@thin film.com Phone: 1 (507) Contact Information sales@thin-film.com Phone: 1 (507)

37 Thin Film Thin Film Technology Corp High purity alumina substrate Thick film resistive element Special material and design for higher working voltage requirements Wrap around electrodes 0603, 0805, 1206, 2010, and 2512 English sizes Resistances from 100KΩ to 100MΩ s of ±1.0% and ±5.0% TCR s as low as ±100ppm/ C Operating voltage as high as 4000V UL 60950/ certified TFUV Series UL Certified, High voltage Thick Film Chip Resistor These high voltage thick film chip resistors are designed for use in applications such as power supply, measurements instruments, back light inverters, and medical/military equipment. These are UL 60950/ certified against impulses up to 10,000 volts. Product Designator Temp. Coefficient of Resistance (TCR) Resistance Value Resistance T&R Packaging QTY TFUV 0603 (1608) 0805 (2012) 1206 (3216) 2010 (5025) 2512 (6432) R = ±100 ppm/ C S = ±200 ppm/ C 4 digits with the first 3 being significant. The last digit specifies the number of zeros. R denotes decimal position as necessary Ex = 1kΩ J = ±5.0% -T4 = 4,000 -T5 = 5,000 (Refer to Electrical Table) Dimension 0603 (0816) 0805 (2012) 1206 (1632) 2010 (2632) 2512 (3264) L (1.60±0.10) (2.00±0.10) (3.10±0.10) (5.00±0.20) (6.40±0.20) 1001 W 0.032±.004 (0.80±0.10) (1.25±0.10) (1.60±0.10) (2.50±0.20) (3.20±0.20) H (0.45±0.10) (0.50±0.10) (0.55±0.10) (0.60±0.10) (0.60±0.15) T (0.30±0.20) (0.40±0.20) (0.50±0.20) 0.025±0.010 (0.65±0.25) 0.025±0.010 (0.65±0.25) T (0.30±0.20) (0.40±0.20) (0.50±0.20) 0.024±0.010 (0.60±0.25) 0.035±0.010 (0.90±0.25) Type TFUV0603 TFUV0805 TFUV1206 TFUV2010 TFUV2512 Metric Size Power 1/10 W 1/8 W 1/4 W 1/2 W 1 W Resistance Offering E-24 Values = ±1.0% (F) or ±5.0% (J) E-96 Values + Jumper = ±1.0% (F) %(code) ±1%(F) ±5.0(J) ±1%(F) ±5.0(J) ±1%(F) ±5.0(J) ±1%(F) ±5.0(J) ±1%(F) ±5.0(J) Resistance Range 100KΩ~22MΩ 100KΩ~100MΩ ±100(R) 100KΩ~ 10MΩ N/A 100KΩ~ 10MΩ N/A 100KΩ~ 10MΩ N/A 100KΩ~ 10MΩ N/A 100KΩ~ 10MΩ N/A ±200(S) N/A 100KΩ~ 22MΩ N/A 100KΩ~ 22MΩ 11MΩ~ 22MΩ 100KΩ~ 100MΩ 11MΩ~ 22MΩ 100KΩ~ 100MΩ 11MΩ~ 22MΩ 100KΩ~ 100MΩ Max. Operating Voltage 200 V 400 V 800 V 2000 V 3000 V Max. Overload Voltage 400 V 800 V 1600 V 3000 V 4000 V -55 C~+155 C Packaging 5,000 pcs/reel 4,000 pcs/reel For a complete For a complete listing listing of products of products visit visit Film.com

38 TFS Series Anti-Surge Thick Film Chip Resistor High anti-surge capability High grade ceramic body High purity alumina substrate Reduced size of final equipment Anti-sulfur 0603, 0805, 1206, 1210, 2010, and 2512 English sizes Resistances from 0.27mΩ to 22MΩ TCR s down to ±100 ppm/ C Resistance down to 0.27Ω available High anti-surge protection AEC-Q200 automotive compliant These Power Surge Chip Resistors are designed for high surge applications such as fuel ignition systems, power charging/discharging circuits, and TV s, to absorb harmful surge power. With a special flame-proof coating, these multipurpose chip resistors reduce the hazard of a fire and/or circuit damage caused by surge power. Other applications include power supply, PDA, digital meters, computers, automotive, battery, and DC-DC power conversion. An added feature is that these are designed for Anti-Sulfur and are AEC-Q200 qualified. Product Designator Temp. Coefficient of Resistance (TCR) Resistance Value Resistance T&R Packaging QTY TFS 0603 (1608) 0805 (2012) 1206 (3216) 1210 (3226) 2010 (5025) 2512 (6432) R = ±100ppm/ C S = ±200ppm/ C 4 digits with the first 3 being significant. The last digit specifies the number of zeros. R denotes decimal position as necessary Ex = 100kΩ J = ±5.0% K = ±10.0% M = ±20.0% -T4 = 4,000 -T5 = 5,000 (Refer to Electrical Table) Dimension 0603 (1608) 0805 (2012) 1206 (3216) 1210 (2632) 2010 (5025) 2512 (6432) L W / H T ±0.010 ± T Type TFS0603 TFS0805 TFS1206 TFS1210 TFS2010 TFS2512 Metric Size Power 1/4 W 1/4 W 1/3 W 1/2 W 3/4 W 1 W % (code) ±5.0(J), ±10(K), ±20(M) Resistance Range 1Ω~1MΩ 0.27Ω~22MΩ TCR ppm/ C (code) 1Ω~9.1Ω = ±200(S) 10Ω~1MΩ = ±100(R) 0.27Ω~0.91Ω = ±200(S) 1Ω~1MΩ = ±100(R) 1.1MΩ~22MΩ = ±200(S) Max. Operating Voltage 150 V 150 V 200 V 200 V 200 V 200 V Max. Overload Voltage 300 V 300 V 400 V 400 V 400 V 400 V -55 C~+155 C Packaging 5,000pcs/reel (T5) 4,000pcs/reel (T4) Surge Resistor Single Pulse Chart Limiting Power (W) Pulse Duration (ms) Contact Information E mail: sales@thin film.com Phone: 1 (507) Contact Information sales@thin-film.com Phone: 1 (507)

39 Thin Film Thin Film Technology Corp High purity alumina substrate Thick film resistive element Wrap around terminations 0201, 0402, 0603, 0805, 1206, 1210, 2010, and 2512 English sizes Resistance values from 1Ω to 1MΩ s of ±0.1%, ±0.5, and ±1.0% TCR s as low as ±50ppm/ C TFH Series High Precision Thick Film Chip Resistor These high precision thick film chip resistors are constructed on a high grade ceramic body for extreme durability. Utilizing a proprietary thick film resistive element to deliver a wide range of sizes, power handling, and resistance values, this series is suitable for most applications. Product Designator Temp. Coefficient of Resistance (TCR) Resistance Value Resistance T&R Packaging QTY TFH 0201 (0603) 0402 (1005) 0603 (1608) 0805 (2012) 1206 (3216) 1210 (3226) 2010 (5025) 2512 (6432) Q = ±50ppm/ C R = ±100ppm/ C S = ±200ppm/ C 4 digits with the first 3 being significant. The last digit specifies the number of zeros. R denotes decimal position as necessary Ex = 100kΩ B = ±0.1% D = ±0.5% -T5 = 5,000 -T10 = 10,000 -T15 = 15,000 Dimension 0201 (0603) 0402 (1005) 0603 (1608) 0805 (2012) 1206 (3216) 1210 (3226) 2010 (5025) 2512 (6432) L 0.024± W 0.012± H 0.009± T ± ±0.010 T ± ±0.010 Type TFH0201 TFH0402 TFH0603 TFH0805 Power 1/20 W 1/16 W 1/10 W 1/8 W Resistance Range 51Ω~1MΩ E-24 and E-96 10Ω~1MΩ E-24 and E-96 % (code) ±0.1(B) ±0.1(B), ±0.5(D) TCR ppm/ C (code) 1KΩ~1MΩ = ±50(Q) 51Ω~976Ω = ±100(R) 100Ω~1MΩ = ±50(Q) 10Ω~1MΩ = ±100(R) 1.02Ω~9.76Ω E-24 and E-96 ±0.5(D), 10Ω~1MΩ E-24 and E-96 ±0.1(B), ±0.5(D) 10Ω~1MΩ E-24 and E-96 ±0.1(B), ±0.5(D) ±100(R) ±50(Q), ±100(R) ±50(Q), ±100(R) Max. Operating Voltage 25 V 50 V 150 V Max. Overload Voltage 50 V 100 V 300 V -55 C~+125 C -55 C~+155 C -55 C~+125 C -55 C~+155 C Packaging 15,000 pcs/reel 10,000 pcs/reel 5,000 pcs/reel Type TFH1206 TFH1210 TFH2010 TFH2512 Max 70 C 1/4 W 1/3 W 1/2 W 1 W Resistance Range 10Ω~1MΩ E-24 and E-96 1Ω~10MΩ E-24 and E-96 % (code) ±0.1(B), ±0.5(D) TCR ppm/ C (code) 10Ω~1MΩ = ±100(R) 10.2Ω~10MΩ= ±100(R) 1Ω~10Ω= ±200(S) Max. Operating Voltage 200 V 250 V Max. Overload Voltage 400 V 500 V Packaging -55 C~+155 C 5,000 pcs/reel For a complete For a complete listing listing of products of products visit visit Film.com

40 TCA, TRN Array/Ladder Network Thick Film Resistor Network Highly reliable and stable thick film resistive element Concave wrap around terminations 100% matte Sn over Ni terminations (RoHS compliant and TCA 0404, 0804, and 1206 English sizes Two or four resistors/array Resistance values between 3Ω and 1MΩ TCR s of ±200 or ±300 ppm/ C TRN 1206 English size Resistance values from 10Ω to 100KΩ s of ±5.0% TCR s of ±200 ppm/ C TCA C C = Concave 0404 (1010) 0804 (2010) 1206 (3216) S = ±200ppm/ C W = ±300ppm/ C 4 digits with the first 3 being significant. The last digit specifies the number of zeros. R denotes decimal position as necessary. All resistors are of equal value in this resistor array. J = ±5.0% Termination Style Temp. Coefficient of Resistance (TCR) Resistance Value Resistance TRN V V = Convex 1206 (3216) S = ±200ppm/ C 4 digits with the first 3 being significant. The last digit specifies the number of zeros. R denotes decimal position as necessary. All resistors are of equal value in this resistor array. J = ±5.0% Type TCA0404 TCA0804 TCA1206 TRN1206 Resistance Range 10Ω~1MΩ (E-24 Values), +Jumper (jumper is 50m) 3Ω~1MΩ (E-24 Values), +Jumper (jumper is 50m) 10Ω~1MΩ (E-24 Values), +Jumper (jumper is 50m) 10Ω~100KΩ (E-24 Values) % (code), ±5.0(J) ±5.0(J) TCR ppm/ C (code) ±300(W) ±200(S) ±200(S) Max. Power at T ambient Temp=70 C 1/16 W 1/10 W 1/16 W Max. Operating Voltage 25 V 50 V 25 V Max. Overload Voltage 50 V 100 V 50 V Rated Current (Jumper) 1 A 1 A - Peak Current (Jumper) 1.5 A 3 A - Package 10,000 pcs/reel 5,000 pcs/reel TCA0404 TCA0804 TCA1206 TRN1206 Size L W T P A Ab B C D Size L W T P A B C G Size L W T P A B C G / / Contact Information E mail: sales@thin film.com Phone: 1 (507) Contact Information sales@thin-film.com Phone: 1 (507)

41 Thin Film Thin Film Technology Corp Highly reliable and stable thick film resistive element Convex wrap around terminations 100% matte Sn over Ni terminations (RoHS compliant and High density design TRA 0404, 0606, 0804, and 1206 English sizes Resistance values from 1Ω to 1MΩ s of ±1.0% and ±5.0% TCR s down to ±200 ppm/ C AEC Q-200 automotive compliant Anti-sulfur TWA 1606 English size Resistance values from 10Ω to 100KΩ s of ±1.0% and ±5.0% TCR of ±200 ppm/ C TRA /T WA Automotive/ High Density Thick Film Resistor Network TRA V V = Convex 0404 (1010) 0606 (1615) 0804 (2010) 1206 (3216) S = ±200ppm/ C W = See Table 4 digits with the first 3 being significant. The last digit specifies the number of zeros. R denotes decimal position as necessary. All resistors are of equal value in this resistor array J = ±5.0% Termination Style Temp. Coefficient of Resistance (TCR) Resistance Value Resistance TWA V V = Convex 1606 (4115) S = ±200ppm/ C 4 digits with the first 3 being significant. The last digit specifies the number of zeros. R denotes decimal position as necessary. All resistors are of equal value in this resistor array. J = ±5.0% Type TRA0404 TRA0606 TRA0804 TRA1206 TWA1606 Resistance Range 3Ω~1MΩ + Jumper 1Ω~1MΩ + Jumper 10Ω~1MΩ + Jumper 10Ω~1MΩ + Jumper 10Ω ~100KΩ (E-24 Values), +Jumper, (jumper is 50mΩ) % (code) ±5.0(J), ±5.0(J) Resistance Offering E-24 Values TCR ppm/ C (code) Less than 10Ω=±400(W) 10Ω or greater=±300(w) Less than 10Ω=-300/+500(W) 10Ω or greater=±200(s) 10Ω = -300/+500(W) 10.2Ω to 976kΩ = ±200(S) 1MΩ=-300/+500(W) ±200(S) Max. Power at T ambient Temp=70 C 1/16 W 1/10 W 1/16 W 1/10 W 1/16 W Max. Operating Voltage 25 V 50 V 25 V 50 V 50 V Max. Overload Voltage 50 V 100 V 50 V 100 V 100 V Rated Current (Jumper) 1 A 1 A 1 A 1 A 1 A Peak Current (Jumper) 1.5 A 3 A 1.5 A 3 A 3 A TRA0404 TRA0606 TRA0804 TRA1206 TWA1606 Size L W T P/C A Tt Tb Size L W T P A B C G Size L W T P A B C G ± For a complete For a complete listing listing of products of products visit visit Film.com

42 CGL Series General Purpose High Voltage MLCC High density, high efficiency, high voltage ceramic capacitors NPO, X7R, and Y5V dielectric materials Wrap around electrodes 0201, 0402, 0603, 0805, 1206, 1210, 1808, and 1812 English sizes 0.5pF to 1.0µF capacitance range high capacitance to size ratio 200 V to 4,000 V These middle and high voltage multilayer ceramic capacitors are designed using a special internal electrode pattern which can reduce voltage concentrations by distributing voltage gradients throughout the entire capacitor. With high voltage for the given case size, these are useful in applications such as snubbers in high frequency power converters, DC-DC converters, back-lighting inverters, and high voltage coupling/dc blocking. Series Termination Dielectric Type Rated Voltage Internal Code Capacitance Value in pf Capacitance T&R Packaging QTY CGL C = Cu/Ni/Sn 0402 (1005) 0603 (1608) 0805 (2012) 1206 (3216) 1210 (3225) 1812 (4532) B = X7R F = Y5V N = NPO (COG) 3 digits with the first 2 being significant. The last digit specifies the number of zeros. R denotes decimal position as necessary. Ex. 631 = 630 V 402 = 4,000 V H = High Voltage 3 digits with the first 2 being significant. The last digit specifies the number of zeros. R denotes decimal position as necessary. Ex. 1R5 = 1.5pF 150 = 15pF A = ±0.05pF B = ±0.1pF C = ±0.25pF D = ±0.5pF G = ±2.0% J = ±5.0% K = ±10.0% M = ±20.0% Z = -20/+80% -T# = #kpcs/reel (see datasheet for offering and corresponding reel diameter) #Reflow soldering only is recommended *Reflow soldering is only recommended for 1206_1000V ~3000V products **Reflow soldering is only recommended for V: Cap >0.47µF, 400V~630V: Cap >0.22µF Dimensions L (mm) W (mm) T (mm)/symbol Remark MB (mm) 0402 (1005) 1.00± ± ±0.05 N # / (1608) 1.60± ± ±0.08 S / / (2012) 2.00± ± / X 0.60±0.10 A 0.80±0.10 B 1.25±0.10 D # 0.40± ±0.20 Dimensions 1210 (3225) L (mm) W (mm) T (mm)/symbol Remark MB (mm) 3.20± ± ±0.10 C # 1.25±0.10 D # 1.60±0.20 G # 3.20± ± ±0.20 K # 2.50± ±0.60** 2.50±0.50** 2.50±0.50** M # 1808 (4520) / ± ±0.10 D # 2.00±0.20 K # 0.75± ± (3216) 3.20± ± ±0.10 B 0.95±0.10 C # 1.25±0.10 D # 3.20± ± ±0.20 G # 0.60±0.20 (0.5±0.25)* 1812 (4532) / ± ± ±0.10 D # 1.60±0.20 G # 2.00±0.20 K # 2.50±0.30 M # 2.80±0.30 U # Dielectric NPO X7R Y5V Size 0402, 0603, 0805, 1206, 1210, 1808, , 1206, 1210, 1812 Capacitance Range 0.5pF to 0.033µF 100pF to 1µF 0.01µF to 0.68µF 0.50±0.25 Capacitance Cap 5pF: ±0.25pF(C) 5pF <Cap<10pF: ±0.5pF(D) Cap 10pF: ±1.0%(F), ±2.0%(G), ±5.0%(J), ±10%(K) ±10%(K), ±20%(M) -20/+80%(Z) Rated Voltage (WVDC) 200 V to 4,000 V 200 V, 250 V DF(Tan δ) Cap<30pF: Q C Cap 30pF: Q 1,000 DF 2.5% DF 5.0% Operating Temperature -55 C~+125 C -25 C~+85 C Capacitance Characteristics ±30ppm ±15% +30/-80% Termination Ni/Sn (Pb-free termination) Contact Information E mail: sales@thin film.com Phone: 1 (507) Contact Information sales@thin-film.com Phone: 1 (507)

43 Thin Film Thin Film Technology Corp High density, high efficiency ceramic capacitors NPO, X7R, X5R, and Y5V dielectric materials Wrap around electrodes 0201, 0402, 0603, 0805, 1206, 1210, and 1812 English sizes 0.1pF to 1.0µF capacitance range high capacitance to size ratio 4V to 100V CGL Series General Purpose MLCC These general purpose chip capacitors are ideal for consumer electronics, telecom, power supply and other applications. They feature a wide range of sizes and a high capacitance for the given component size. Series CGL Termination C = Cu/Ni/Sn 0201 (0603) 0402 (1005) 0603 (1608) 0805 (2012) 1206 (3216) 1210 (3225) 1812 (4532) Dielectric Type B = X7R F = Y5V N = NPO (COG) X = X5R Rated Voltage 3 digits with the first 2 being significant. The last digit specifies the number of zeros. R denotes decimal position as necessary. Ex. 6R3 =6.3 V 101 =100 V Internal Code A Capacitance Value in pf 3 digits with the first 2 being significant. The last digit specifies the number of zeros. R denotes decimal position as necessary. Ex. 1R5 = 1.5pF 150 = 15pF Capacitance A = ±0.05pF B = ±0.1pF C = ±0.25pF D = ±0.5pF G = ±2.0% J = ±5.0% K = ±10.0% M = ±20.0% Z = -20/+80% T&R Packaging QTY -T# = #kpcs/reel (see datasheet for offering and corresponding reel diameter) * R = Reflow soldering process ; W = Wave soldering process. ** For 1808_200V ~3kV, 1812_200V~3kV and safety certificated products. *** For 1206_1000V ~3kV,1808_200V ~3kV, 1812_200V~3kV and safety certificated products. #1 : For 0201/Cap 0.68μF products. #2 : For 0805/0.22μF/100V/ T thickness: /-0.1(mm) Dimensions 0201 (0603) 0402 (1005) 0603 (1608) 0805 (2012) L (mm) W (mm) T (mm)/symbol Soldering Method * MB (mm) 0.6± ± ± ±0.05 #2 0.3±0.05 #2 0.3±0.05 #2 L R 0.15± ±0.09 #3 0.3±0.09 #3 0.3±0.09 # / ± ± ±0.05 N R /-0.05 Q R / ± ± ±0.20 E R 1.60± ± ±0.07 S R / W / / ±0.10 H R / W /-0.10 X R / W 0.40± ±0.20 #1 0.80±0.20 #1 0.8±0.20 #1 0.50±0.10 H R / W 2.00± ± ±0.10 A R / W 0.80±0.10 B R / W 0.50± ±0.10 D R 2.00± ± ±0.10 #4 T #4 R / W 1.25±0.20 I R Dimensions 1206 (3216) 1210 (3225) 1812 (4532) L (mm) W (mm) T (mm)/symbol Soldering Method * 0.80±0.10 B R / W 3.20± ±0.10 C R 1.60± ±0.10 D R 1.15±0.15 J R 3.20± ±0.20 G R 1.60± ±0.10 T R / W / / /-0.10 P R 0.95±0.10 C R 3.20± ± ±0.10 T R 1.25±0.10 D R 1.60±0.20 G R 3.20± ± ±0.20 K R 2.50±0.30 M R 1.25±0.10 D R 4.50±0.40 ( /-0.3)** 3.20± ± ±0.20 G R 2.00±0.20 K R 2.50±0.30 M R 2.80±0.30 U R MB (mm) 0.60±0.20 (0.5±0.25)*** 0.75± ±0.25 (0.5±0.25)*** Dielectric NP0 X7R Y5V X5R Size 0201, 0402, 0603, 0805, 1206, 1210, 1812 Capacitance Range 0.1pF to 0.1µF 100pF to 1µF 0.01µF to 1µF 100pF to 1µF Capacitance Cap 5pF: ±0.05pF(A), ±0.1pF(B), ±0.25pF(C) 5pF<Cap<10pF: ±0.25pF(C), ±0.5pF(D) Cap 10pF: ±1%(F), ±2%(G), ±5%(J), ±10%(K) ±5%(J), ±10%(K), ±20%(M) ±20%(M), -20/+80%(Z) ±10%(K), ±20%(M) Rated Voltage (WVDC) 10 V, 16 V, 25 V, 50 V,100 V 6.3 V, 10 V, 16 V, 25 V, 50 V, 100 V DF(Tan δ)* Cap<30pF: Q C Cap 30pF: Q 1000 Note 1 Operating Temperature -55 C~+125 C -25 C~+85 C -55 C~+85 C Capacitance Characteristic ±30ppm ±15% +30/-80% ±15% Termination Ni/Sn (Pb-free termination) For a complete For a complete listing listing of products of products visit visit Film.com

44 CST Series Soft Termination High Voltage MLCC Flexible terminations X7R, NPO dielectric material Wrap around electrodes 0603, 0805, 1206, 1210, 1808, and 1812 English sizes 0.5pF to 1.0µF capacitance range high capacitance to size ratio 200 V to 3000 V The CST flexible termination, high voltage series is designed with a polymer layer in the end terminations of the product, which can absorb mechanical stress caused by PCB handling in SMT line. It also reduces the mechanical impact for the product. These MLCCs are ideal for DC to DC converters, backlighting inverters, high voltage coupling/dc blocking, and snubbers in high frequency power converters. Series Termination Dielectric Type Rated Voltage Internal Code Capacitance Value in pf Capacitance T&R Packaging QTY CST C = Cu-polymer/Ni/Sn 0603 (1608) 0805 (2012) 1206 (3216) 1210 (3225) 1808 (4520) 1812 (4532) B = X7R N = NPO (COG) 3 digits with the first 2 being significant. The last digit specifies the number of zeros. R denotes decimal position as necessary. Ex. 6R3 = 6.3V 101 = 100V H = High Voltage 3 digits with the first 2 being significant. The last digit specifies the number of zeros. R denotes decimal position as necessary. Ex. 1R5 = 1.5pF 101 = 100pF B = ±0.1pF C = ±0.25pF D = ±0.5pF G = ±2.0% J = ±5.0% K = ±10.0% M = ±20.0% Z = -20/+80% -T# = #kpcs/reel (see datasheet for offering and corresponding reel diameter) # Reflow soldering only is recommended * Reflow soldering is only recommended for 1206_1000V ~3000V products. Dimensions 0603 (1608) 0805 (2012) 1206 (3216) L (mm) W (mm) T (mm)/symbol Remark MB (mm) S X A B D # I # B / C # D # / G # P # ( )* Dimensions 1210 (3225) L (mm) W (mm) T (mm)/symbol Remark MB (mm) (4520) / (4532) / C # D # G # K # M # D # K # D # G # K # M # Dielectric NP0 X7R Size 0603, 0805, 1206, 1210, 1808, 1812 Capacitance 0.5pF to 0.01µF 100pF to 1.0µF Capacitance Cap 5pF: ±0.25pF(C) 5pF<Cap<10pF: ±0.5pF(D) Cap 10pF: ±1%(F), ±2%(G), ±5%(J), ±10%(K) ±10%(K), ±20%(M) Rated Voltage (WVDC) 200 V to 3000 V Cap<30pF: Q C DF 2.5% Q/DF* Cap 30pF: Q 1000 Insulation Resistance at Ur Ur=200~630 V: 10GΩ or RxC 100Ω-F whichever is smaller Ur=1000~3000 V: 10GΩ 200~300 V: 2 x WVDC Dielectric Strength 500~999 V: 1.5 x WVDC 1000~3000 V: 1.2 x WVDC Operating Temperature -55 C~+125 C Capacitance Characteristic ±30ppm ±15% Termination Ni/Sn (Pb-free termination) Contact Information E mail: sales@thin film.com Phone: 1 (507) Contact Information sales@thin-film.com Phone: 1 (507)

45 Thin Film Thin Film Technology Corp Flexible terminations NPO, X7R, X5R, and Y5V dielectric materials Wrap around electrodes 0402, 0603, 0805, 1206, 1210, and 1812 English sizes 0.1pF to 22µF capacitance range high capacitance to size ratio 6.3 V to 100 V CST Series Soft Termination General Purpose MLCC The CST flexible termination series is designed with a polymer layer in the end terminations of the product, which can absorb mechanical stress caused by PCB handling in SMT line. It reduces the mechanical impact for the product. These MLCCs are ideal for the automotive, power supply, lighting and other industries. Series Termination Dielectric Type Rated Voltage Internal Code Capacitance Value in pf Capacitance T&R Packaging QTY CST C = Cu-polymer/Ni / Sn 0402 (1005) 0603 (1608) 0805 (2012) 1206 (3216) 1210 (3225) 1812 (4532) B = X7R F = Y5V N = NPO (COG) X = X5R 3 digits with the first 2 being significant. The last digit specifies the number of zeros. R denotes decimal position as necessary. Ex. 6R3 = 6.3 V 101 =100 V A 3 digits with the first 2 being significant. The last digit specifies the number of zeros. R denotes decimal position as necessary. Ex. 1R5 =1.5pF 101 =100pF B = ±0.1pF C = ±0.25pF D = ±0.5pF G = ±2.0% J = ±5.0% K = ±10.0% M = ±20.0% Z = -20/+80% -T# = #kpcs/reel (see datasheet for offering and corresponding reel diameter) # Reflow soldering only is recommended Dimensions L (mm) W (mm) T (mm)/symbol Remark MB (mm) 0402 (1005) 1.00± ± ±0.20 E 0603 (1608) 0805 (2012) 1206 (3216) 1.60± ± ±0.07 S 1.60± ± ±0.30 X 0.60±0.10 A 2.00± ± ±0.10 B 1.25±0.10 D # 2.00± ± ±0.30 I # 0.80±0.10 B 0.95±0.10 C # / ± ±0.15 J # 1.25±0.10 D # / ± ±0.20 G # 3.20± ± ±0.50 P # / ± ± ±0.20 Dimension 1210 (3225) 1812 (4532) /-0.4 L (mm) W (mm) T (mm)/symbol Remark MB (mm) 3.20± ± ± ± ± ±0.10 C # 1.25±0.10 D # 1.60±0.20 G # 2.00±0.20 K # 2.50±0.50 M # 1.25±0.10 D # 1.60±0.20 G # 2.00±0.20 K # 3.20± ±0.50 M # 0.75± ±0.25 Dielectric NP0 X7R X5R Y5V Size 0402, 0603, 0805, 1206, 1210, 1812 Capacitance Range 0.1pF to 0.039μF 100pF to 22μF 0.027μF to 10μF 0.01μF to 4.7μF Cap 0.1pF to 4.7pF: ±0.1pF(B), ±0.25pF(C) Cap 5.6pF to 8.2pF: Capacitance ±0.25pF(C), ±0.5pF(D) ±10%(K), ±20%(M) -20/+80%(Z) Cap 10pF or greater: ±1%(F), ±2%(G), ±5%(J), ±10%(K) Rated Voltage (WVDC) 6.3 V, 10 V, 16 V, 25 V, 50 V, 100 V Operating Temperature -55 C~+125 C -55 C~+125 C -55 C~+85 C -25 C~+85 C Capacitance Characteristic ±30ppm ±15% ±15% +30/-80% Termination Ni/Sn (Pb-free termination) For a complete For a complete listing listing of products of products visit visit Film.com 45

46 CRF Series High Frequency MLCC Capacitor High frequency microwave series NPO dielectric material Wrap around electrodes 100% matte Sn over Ni terminations (RoHS compliant and 01005, 0201, 0402, 0603, and 0805 English sizes 0.1pF to 100pF capacitance range high capacitance to size ratio of ±0.05pF to ±5.0% 6.3 V to 500 V These multilayer ceramic capacitors offer a High Q and low ESR performance at high frequency. They offer ultra low capacitance and high precision tolerance. They are ideal for telecom applications as they can improve the quality of telephone calls for low power loss and better performance. Series Termination Dielectric Type Rated Voltage Internal Code Capacitance Value in pf Capacitance T&R Packaging QTY CRF C = Cu/Ni/Sn For 01005, use 0100 (0402) 0201 (0603) 0402 (1005) 0603 (1608) 0805 (2012) N = NPO 3 digits with the first 2 being significant. The last digit specifies the number of zeros. R denotes decimal position as necessary. Ex. 6R3 = 6.3 V 101 = 100 V A 3 digits with the first 2 being significant. The last digit specifies the number of zeros. R denotes decimal position as necessary. Ex. 1R5 = 1.5pF 101 = 100pF A = ±0.05pF B = ±0.1pF C = ±0.25pF D = ±0.5pF G = ±2.0% J = ±5.0% -T# = #kpcs/reel (see datasheet for offering and corresponding reel diameter) # Reflow soldering only is recommended Dimensions L (mm) W (mm) T (mm)/symbol Remark MB (mm) Dimensions L (mm) W (mm) T (mm)/symbol Remark MB (mm) (0402) 0.40± ± ±0.02 V # 0.10± ± ± ±0.07 S 0201 (0603) 0.60± ± ±0.03 L # 0.15± (1608) / / ±0.10 H 0.40± ± ± ±0.10 A 0402 (1005) 1.00± ± ±0.05 N # / (2012) 2.00± ± ±0.10 T 0.50±0.20 Dielectric NP , 0201, 0402, 0603, 0805 Capacitance 0.1pF to 100pF Capacitance equal to or less than 5pF: ±0.05pF(A), ±0.1pF(B), ±0.25pF(C) Capacitance Capacitance greater than 5pF but less than 10pF: ±0.1pF(B), ±0.25pF(C), ±0.5pF(D) Capacitance equal to or greater than 10pF: ±1%(F), ±2%(G), ±5%(J) Rated Voltage (WVDC) 6.3 V, 10 V, 16 V, 25 V, 50 V, 100 V, 250 V, 500 V For case sizes of 01005, 0201, 0402 with 25 V to 50 V rating: For capacitance values of less than 30pF: Q C For capacitance values of 30pF or greater: Q 1000 Q For case size of 0402 with 100 V to 200 V rating, or for case sizes of 0603, 0805: For capacitance values of less than 30pF: Q C; For capacitance values equal to or greater than 30pF: Q 1400 Insulation Resistance at Ur 10GΩ or RxC 100Ω-F whichever is smaller. Operating Temperature -55 C~+125 C Capacitance Change ±30ppm/ C For case size 0201 with capacitance equal to or greater than 22pF, ±60ppm/ C Termination Ni/Sn (Pb-free termination) Contact Information E mail: sales@thin film.com Phone: 1 (507) Contact Information sales@thin-film.com Phone: 1 (507)

47 Thin Film Thin Film Technology Corp NPO & X7R dielectric material Wrap around electrodes 0201, 0402, 0603, 0805, 1206, and 1210 English sizes 0.1pF to 1.0µF capacitance range high capacitance to size ratio AEC-Q200 automotive compliant CAL Series AEC-Q200 MLCC Capacitor TFT s CAL series multilayer ceramic capacitor is AEC-Q200 qualified and made up of NP0 & X7R dielectrics, which provides product with high electrical precision, stability, and reliability to assure quality performance in automotive applications. Series Termination Dielectric Type Rated Voltage Internal Code Capacitance Value in pf Capacitance T&R Packaging QTY CAL C = Cu/Ni/Sn 0201 (0603) 0402 (1005) 0603 (1608) 0805 (2012) 1206 (3216) 1210 (3225) N = NP0 B = X7R 3 digits with the first 2 being significant. The last digit specifies the number of zeros. R denotes decimal position as necessary. Ex. 6R3 = 6.3V 101 = 100V A 3 digits with the first 2 being significant. The last digit specifies the number of zeros. R denotes decimal position as necessary. Ex. 1R5 = 1.5pF 101 = 100pF A = ±0.05pF B = ±0.1pF C = ±0.25pF D = ±0.5pF G = ±2.0% J = ±5.0% K = ±10% M = ±20% -T# = #kpcs/reel (see datasheet for offering and corresponding reel diameter) # Reflow soldering only is recommended Dimensions L (mm) W (mm) T (mm) / Symbol Remark MB(mm) Dimensions L (mm) W (mm) T (mm) / Symbol Remark MB(mm) 0201 (0603) 0.60± ± ±0.03 L # 0.15± (1005) 1.00± ± ±0.05 N # / (1608) 1.60± ± ±0.07 S / / / X 0.40± (3216) 3.20± ± ± / / ±0.10 B 0.95±0.10 C 1.25±0.10 D # 1.15±0.15 J # 1.60± ±0.20 G # / P # 0.60± (2012) 2.00± ± ±0.10 A 0.80±0.10 B 1.25±0.10 D # 0.50± (3225) 3.20± ± ± ± ±0.10 C # 1.25±0.10 D # 1.60±0.20 G # 2.00±0.20 K # 0.75± ± ± ±0.20 I # 2.50±0.30 M # Dielectric NP0 X7R Size 0201, 0402, 0603, 0805, 1206, , 0603, 0805, 1206 Capacitance Range 0.1pF to 0.039µF 100pF to 1.0µF Cap 5pF#1: ±0.05pF(A), ±0.1pF(B), ±0.25pF(C) Capacitance 5pF<Cap<10pF: ±0.1pF(B), ±0.25pF(C), ±0.5pF(D) Cap 10pF: ±1%(F), ±2%(G), ±5%(J) ±5%(J), ±10%(K), ±20%(M) Rated Voltage (WVDC) Operating Temperature 10 V, 16 V, 25 V, 50 V, 100 V, 200 V, 250 V, 500 V, 630 V -55 C~+125 C Capacitance Characteristics ±30ppm/ C ±15% Termination Ni/Sn (Pb-free termination) For a complete For a complete listing listing of products of products visit visit Film.com 47

48 CLP Series Low Profile MLCC Capacitor X7R, X5R, and Y5V dielectric material Wrap around electrodes 100% matte Sn over Ni terminations (RoHS compliant and 0402, 0603, 0805, 1206, and 1210 English sizes 0.22µF to 47µF capacitance range high capacitance to size ratio 6.3 V to 100 V These multilayer ceramic capacitors offer a low profile combined with high capacitance values. They are ideal for LCD panels, PCMCA cards, and any other application with thickness concerns. Series Termination Dielectric Type Rated Voltage Internal Code Capacitance Value in pf Capacitance T&R Packaging QTY CLP C = Cu/Ni/Sn 0402 (1005) 0603 (1608) 0805 (2012) 1206 (3216) 1210 (3225) B = X7R F = Y5V X = X5R 3 digits with the first 2 being significant. The last digit specifies the number of zeros. R denotes decimal position as necessary. Ex. 6R3 = 6.3 V 101 = 100 V A 3 digits with the first 2 being significant. The last digit specifies the number of zeros. R denotes decimal position as necessary. Ex. 1R5 = 1.5pF 476 = 47.6µF K = ±10% M = ±20% Z = -20/+80% -T# = #kpcs/reel (see datasheet for offering and corresponding reel diameter) # Reflow soldering only is recommended Dimensions L (mm) W (mm) T max (mm)/symbol MB (mm) Dimensions L (mm) W (mm) T max (mm)/symbol MB (mm) 0402 (1005) 1.00± ± L 0.25± (3216) 3.20± ± T 1.30 J 0.60± (1608) / / H 0.40± (2012) 2.00± ± T 0.50± (3225) 3.20± ± T 2.00 K 0.75±0.25 Dielectric X7R X5R Y5V Size 0402, 0603, 0805, 1206, 1210 Capacitance Range 1.0μF to 10μF 0.22μF to 47μF 1μF to 10μF Capacitance ±10%(K), ±20%(M) -20/+80%(Z) Rated Voltage (WVDC) 10 V, 16 V, 25 V, 50 V, 100 V 6.3 V, 10 V, 16 V, 25 V 10 V, 16 V, 25 V, 50 V Operating Temperature -55 C~+125 C -55 C~+85 C -25 C~+85 C Capacitance Characteristic ±15% +30/-80% Termination Ni/Sn (Pb-free termination) Contact Information E mail: sales@thin film.com Phone: 1 (507) Contact Information sales@thin-film.com Phone: 1 (507)

49 Thin Film Thin Film Technology Corp NP0 and X7R dielectric material Wrap around electrodes Ag/Cu/Sn terminations (RoHS compliant and 0603, 0805, 1206, 1210, 1808, 1812, 1825, 2220, and 2225 English sizes Rated voltage up to 3,000V-high voltage to size ratio 0.5pF to 2.2µF capacitance range CNM Series Non-Magnetic MLCC Capacitor TFT s CNM series MLCC is made up of NP0 & X7R dielectrics, which provide products with high electrical precision, stability and reliability to assure quality performance. They are useful in many applications such as high reliability medical systems, high voltage coupling/dc blocking, and back light inverters. They features excellent control in dielectric thickness, electrode integrity, and electrode-to-termination continuity. This product is made using green materials and is lead free and non-magnetic. Series Termination Dielectric Type Rated Voltage Internal Code Capacitance Value in pf Capacitance T&R Packaging QTY CNM L = Ag/Cu/Sn 0603 (1608) 0805 (2012) 1206 (3216) 1210 (3225) 1808 (4520) 1812 (4532) 1825 (4563) 2220 (5750) 2225 (5763) B = X7R N = NP0 (COG) 3 digits with the first 2 being significant. The last digit specifies the number of zeros. Ex. 501 = 500 V 202 = 2000 V A 3 digits with the first 2 being significant. The last digit specifies the number of zeros. R denotes decimal position as necessary. Ex. 1R5 = 1.5pF 101 = 100pF B = ±0.1pF C = ±0.25pF D = ±0.5pF G = ±2.0% J = ±5.0% K = ±10.0% M = ±20.0% -T# = #kpcs/reel (see datasheet for offering and corresponding reel diameter) Dimensions L (mm) W (mm) H(mm)/Symbol Remark M8 (mm) 0603 (1608) 1.60± ± ±0.07 S /-0.10 X 0.60±0.10 A 0.40±0.15 # Reflow soldering only is recommended Dimensions L (mm) W (mm) H(mm)/Symbol Remark M8 (mm) 1808 (4520) 4.60± ± ±0.10 D # 1.60±0.20 G # 0.75± (2012) 2.10± ± ±0.10 B 0.95±0.10 C # 0.50± ±0.20 K # 1.25±0.10 D # 1206 (3216) 3.30± / ±0.10 D # 0.80±0.10 B 0.95±0.10 C # 1.25±0.10 D # 0.60± (4532) 4.60± ± ±0.20 G # 2.00±0.20 K # 2.50±0.30 M # 0.75± ±0.20 G # 2.80±0.30 U # 1210 (3225) 3.30± ± ±0.10 C # 1.25±0.10 D # 1.60±0.20 G # 2.00±0.20 K # 0.75± (4563) 4.50± ± (5750) 5.70± ± ±0.20 (G) 2.00±0.20 (K) 2.50±0.30 (M) # 0.85± ±0.30 M # 2225 (5763) 5.70± ± ±0.30 (U) Dielectric NP0 X7R Size 0603, 0805, 1206, 1210, 1808, 1812, 1825, 2220, 2225 Capacitance Range 0.5pF to 0.068µF 180pF to 2.2µF Cap 5pF: ±0.1pF(B), ±0.25p(C) Capacitance 5pF<Cap<10pF: ±0.25pF(C), ±0.5pF(D) Cap 10pF: ±1%(F), ±2%(G), ±5%(J), ±10%(K) ±5%(J), ±10%(K), ±20%(M) Rated Voltage (WVDC) 50 V, 100 V, 200 V, 250 V, 500 V, 630 V, 1000 V, 1500 V, 2000 V, 3000 V Tan δ* Cap <30pF: Q C Cap 30pF: Q % Operating Temperature -55 C~+125 C Capacitance Characteristic ±30ppm ±15% Termination Ag/Cu/Sn (Pb-free termination) For a complete For a complete listing listing of products of products visit visit Film.com 49

50 CAA Series AEC Q200 MLCC Capacitor Array NPO and X7R dielectric material High density and highly efficient materials used to achieve miniaturization 100% matte Sn over Ni terminations (RoHS compliant and 0508 English size 10pF to 0.1µF capacitance range 10 V to 50 V The CAA series provides a product with high electrical precision, stability, and reliability to assure quality performance. This makes it useful for automotive applications such as navigation information and entertainment equipment. Series Termination CAA C = Cu/Ni/Sn 0508 (1220) Dielectric Type B = X7R N = NP0 Rated Voltage 3 digits with the first 2 being significant. The last digit specifies the number of zeros. R denotes decimal position as necessary. Ex.160 = 16 V 101 =100 V Internal Code A Capacitance Value in pf 3 digits with the first 2 being significant. The last digit specifies the number of zeros. R denotes decimal position as necessary. Ex. 104 = 0.10µF 101 = 100pF Capacitance J = ±5% K = ±10% M = ±20% T&R Packaging QTY -T4 = 4,000 Reflow soldering only is recommended Outline Dimensions L (mm) W (mm) T (mm)/symbol S (mm) BW (mm) P (mm) 4x (1220) 2.00± ± ±0.10 T 0.20± ± ±0.10 Dielectric NP0 X7R Size 4x (1220) 4x (1220) Capacitance 10pF to 220pF 1000pF to 0.1µF Capacitance ±5%(J), ±10%(K) ±10%(K), ±20%(M) Rated Voltage (WVDC) 50 V 10 V, 16 V, 25 V Insulation Resistance at Ur Operating Temperature 10GΩ or RxC 500ΩxF whichever is less -55 C~+125 C Capacitance Characteristic ±30ppm ±15% Termination Ni/Sn (Pb-free termination) Contact Information E mail: sales@thin film.com Phone: 1 (507) Contact Information sales@thin-film.com Phone: 1 (507)

51 Thin Film Thin Film Technology Corp NPO, X7R, and Y5V dielectric material Special internal electrode pattern, which can reduce voltage concentrations 0508 and 0612 English sizes 10pF to 0.1µF capacitance range 10 V to 100 V CAC Series High Density MLCC Capacitor Array These multilayer ceramic capacitor arrays offers increased capacitance values in a given case size and voltage rating. They are ideal for digital and signal line noise, computer motherboards and peripherals, and other common electronic circuits. Series CAC Termination C = Cu/Ni/Sn 0508 (1220) 0612 (1632) Dielectric Type B = X7R F = Y5V N = NP0 Rated Voltage 3 digits with the first 2 being significant. The last digit specifies the number of zeros. R denotes decimal position as necessary. Ex. 6R3 = 6.3 V 101 = 100 V Internal Code A Capacitance Value in pf 3 digits with the first 2 being significant. The last digit specifies the number of zeros. R denotes decimal position as necessary. Ex. 1R5 = 1.5pF 471 = 470pF Capacitance J = ±5% K = ±10% M = ±20% Z = -20/+80% T&R Packaging QTY -T4 = 4,000 Reflow soldering only is recommended Outline Dimensions L (mm) W (mm) T (mm)/symbol S (mm) BW (mm) P (mm) 4x (1220) 2.00± ± ±0.10 T 0.20± ± ±0.10 4x (1632) 3.20± ± ±0.10 B 0.30± ± ±0.15 Dielectric NP0 X7R Y5V Size Inch (mm) 4x (1220) 4x (1632) 4x (1220) 4x (1632) 4x (1632) Capacitance 10pF to 270pF 10pF to 470pF 1000pF to 100nF 180pF to 100nF 10nF to 100nF Capacitance ±5%(J), ±10%(K) ±10%(K), ±20%(M) -20/+80%(Z) Rated Voltage (WVDC) 25 V, 50 V, 100 V 10 V, 16 V, 25 V, 50 V 16 V, 25 V, 50 V 16 V, 50 V Q/Tan δ Cap<30pF: Q C Cap 30pF: Q 1000 Ur=50 V, 2.5% Ur=25 V&16 V, 3.5% Ur=10 V, 5.0% Ur=50 V, 5% Ur=16 V, 7% Insulation Resistance at Ur 10GΩ 10GΩ or RxC 500ΩxF whichever is less Operating Temperature -55 C~+125 C -25 C~+85 C Capacitance Characteristic ±30ppm ±15% +30/-80% Termination Ni/Sn (Pb-free termination) For a complete For a complete listing listing of products of products visit visit Film.com

52 1980 Commerce Drive North Mankato, MN (USA) Phone: 1 (507) Fax: 1 (507) sales@thin-fi lm.com About Thin Film Technology Corp. Thin Film Technology was incorporated in 1979 in North Mankato, Minnesota (USA) for the purpose of supplying thin fi lm resistor products to the computer industry. While TFT continues to supply a wide variety of thin fi lm resistive products to a wide array of electronic market segments, we also develop and distribute signal integrity products intended for high speed electronic applications as well as a full line of power resistor products, for both DC and RF applications. Mission Statement: TFT is a leading edge solution provider of high performance passive electronic components for wireless, FTTx, and power architectures, servicing automotive, medical, military, data-communication, ATE, and aerospace markets. TFT provides a dependable global supply of innovative components and services based on our strong commitment to enduring relationships with our customers. TFT is committed to building and maintaining customer relationships while contnuing to provide highly reliable and incredibly stable electronic solutions. With our capabilities, TFT services our customers by providing the entire process from simulation through mass production. We accomplish this by utilizing thin fi lm and emerging technologies that serve our current and future electronic markets. We embrace strong relationships and teamwork in pursuit of our mission. This ensures that our customers know that they can depend on TFT. Copyright 2018 Thin Film Technology Corp.