144~200W Constant Voltage + Constant Current LED DriverELG-200 s eries IP67

Transcription

1 THOMAS SAMUEL THOMAS SAMUEL 144~00W Constant Voltage Constant Current LED DriverELG00 s eries (for DAType only) 110 Features Constant Voltage Constant Current mode output Metal housing design with functional Ground Builtin active PFC function No load / Standby power consumption <0.5W IP67 / IP65 rating for indoor or outdoor installations Function options: output adjustable via potentiometer; 3 in 1 dimming (dimtooff); Smart timer dimming; DALI Typical lifetime>50000 hours 5 years warranty M M SELV IP65 IP67 Type HL 8 IS 15885(Part /Sec13) R (for 1/1B/4/4B/36/36A /4A/48/48A/54A only) Applications LED street lighting LED architectural lighting LED bay lighting LED floodlighting Type HL for use in Class I, Division hazardous (Classified) location. S&E Description ELG00 series is a 00W AC/DC LED driver featuring the dual mode constant voltage and constant current output. ELG00 operates from 100~305VAC and offers models with different rated voltage ranging between 1V and 54V. Thanks to the high efficiency up to 93%, with the fanless design, the entire series is able to operate for 40 ~ case temperature under free air convection. The design of metal housing and IP67/IP65 ingress protection level allows this series to fit both indoor and outdoor applications. ELG00 is equipped with various function options, such as dimming methodologies, so as to provide the optimal design flexibility for LED lighting system Model Encoding ELG 00 4 A Blank:wire input for standard model Input wiring type{ Function mode option 3Y:3wire input for standard model Rated output voltage(1/4/36/4/48/54v) Rated wattage Series name Type Blank A B DA Dx D IP Level IP67 IP65 IP67 IP67 IP67 IP67 Function Io and Vo fixed. Io and Vo adjustable through builtin potentiometer. 3 in 1 dimming function (0~10Vdc, 10V PWM signal and resistance) DALI control technology. Builtin Smart timer dimming function by user request. Builtin Smart timer dimming and programmable function. Note In Stock In Stock In Stock In Stock By request In Stock File Name:ELG00SPEC

2 SPECIFICATION MODEL OUTPUT INPUT PROTECTION ENVIRONMENT SAFETY & EMC OTHERS NOTE DC VOLTAGE RATED POWER RIPPLE & NOISE (max.) Note.3 150mVpp VOLTAGE ADJ. RANGE CURRENT ADJ. RANGE VOLTAGE TOLERANCE Note.4 LINE REGULATION LOAD REGULATION SETUP, RISE TIME Note.6 HOLD UP TIME (Typ.) VOLTAGE RANGE FREQUENCY RANGE POWER FACTOR EFFICIENCY (Typ.) AC CURRENT INRUSH CURRENT(Typ.) LEAKAGE CURRENT SHORT CIRCUIT OVER VOLTAGE OVER TEMPERATURE WORKING TEMP. MAX. CASE TEMP. WORKING HUMIDITY EMC IMMUNITY MTBF Note.5 TOTAL HARMONIC DISTORTION MAX. No. of PSUs on 16A CIRCUIT BREAKER OVER CURRENT STORAGE TEMP., HUMIDITY TEMP. COEFFICIENT VIBRATION WITHSTAND VOLTAGE ISOLATION RESISTANCE EMC EMISSION DIMENSION PACKING 144~00W Constant Voltage Constant Current LED Driver ELG001 1V Adjustable for AType only (via builtin potentiometer) Adjustable for AType only (via builtin potentiometer) 500ms, 100ms/30VAC, 1000ms, 100ms/115VAC 10ms/ 30VAC 10ms/ 115VAC 100 ~ 305VAC 14 ~ 431VDC (Please refer to "STATIC CHARACTERISTIC" section) 47 ~ 63Hz PF 0.97/115VAC, PF 0.95/30VAC, PF 0.9/77VAC@full load (Please refer to "POWER FACTOR (PF) CHARACTERISTIC" section) THD< 0%(@load 75%/77VAC) (Please refer to TOTAL HARMONIC DISTORTION(THD) section) 1.8A / 115VAC 1.A / 30VAC 1.0A/77VAC COLD START 60A(twidth=510μ s measured at 50% Ipeak) at 30VAC; Per NEMA units (circuit breaker of type B) / 6 units (circuit breaker of type C) at 30VAC <0.75mA / 77VAC NO LOAD / STANDBY No load power consumption <0.5W for Blank / A / Dx / DType POWER CONSUMPTION Note.7 Standby power consumption <0.5W for B / DAType 95 ~ 108% Constant current limiting, recovers automatically after fault condition is removed Hiccup mode, recovers automatically after fault condition is removed Shut down output voltage, repower on to recover Shut down output voltage, repower on to recover Tcase=40 ~ (Please refer to OUTPUT LOAD vs TEMPERATURE section) Tcase= 0 ~ 95% RH noncondensing 40 ~, 10 ~ 95% RH ±0.03%/ (0 ~ 50 ) ELG V 10 ~ 500Hz, 5G 1min./1cycle, period for 7min. each along X, Y, Z axes I/PO/P:3.75KVAC I/PFG:.0KVAC O/PFG:1.5KVAC I/PO/P, I/PFG, O/PFG:100M Ohms / 500VDC / 5 / RH ELG004 ELG0048 CONSTANT CURRENT REGION Note. 6 ~ 1V 1 ~ 4V 18 ~ 36V 1 ~ 4V 4 ~ 48V RATED CURRENT 16A 8.4A 5.55A 4.76A 4.16A SAFETY STANDARDS DALI STANDARDS 00VAC ~ 305VAC 19W 100VAC ~ 180VAC ELG004 4V 01.6W 00mVpp 199.8W 50mVpp ELG0054 Compliance to EN55015,EN Class C (@load 50%) ; EN ;GB1765.1,GB17743;EAC TP TC 00 Compliance to EN610004,3,4,5,6,8,11; EN61547, light industry level (surge immunity LineEarth 6KV, LineLine 4KV);EAC TP TC All parameters NOT specially mentioned are measured at 30VAC input, rated current and 5 of ambient temperature.. Please refer to "DRIVING METHODS OF LED MODULE". 3. Ripple & noise are measured at 0MHz of bandwidth by using a 1" twisted pairwire terminated with a 0.1uf & 47uf parallel capacitor. 4. Tolerance : includes set up tolerance, line regulation and load regulation. 5. Derating may be needed under low input voltages. Please refer to STATIC CHARACTERISTIC sections for details. 6. Length of set up time is measured at first cold start. Turning ON/OFF the driver may lead to increase of the set up time. 7. No load/standby power consumption is specified for 30VAC input. 8. The driver is considered as a component that will be operated in combination with final equipment. Since EMC performance will be affected by the complete installation, the final equipment manufacturers must requalify EMC Directive on the complete installation again. 9. This series meets the typical life expectancy of >50,000 hours of operation when Tcase, particularly point (or TMP, per DLC), is about 70 or less. 10. Please refer to the warranty statement on MEAN WELL's website at 4V 199.9W 50mVpp 48V W 50mVpp 54V 7 ~ 54V 3.7A 00.88W 350mVpp 11. ~ 1.8V.4 ~ 5.6V 33.5 ~ 38.5V 39 ~ 45V 44.8 ~ 51.V 50 ~ 57V 8 ~ 16A 4. ~ 8.4A.78 ~ 5.55A.38 ~ 4.76A ±3.0% ±.0% ±.0% ±.0% ±.0% % 9% 9% 9.5% 13.5 ~ 18V 7 ~ 34V 4 ~ 49V 47 ~ 54V 44**37.5mm (L*W*H) 1.Kg; 1pcs / 15.Kg / 0.7CUFT.08 ~ 4.16A ±.0% 93% 54 ~ 63V 1.86 ~ 3.7A ±.0% 93% 60 ~ 67V UL8750(type HL ), CSA C. No ; IEC/EN/AS/NZS 6134, IEC/EN/AS/NZS independent, EN6384; EAC TP TC 004;BISIS15885(for 1/1B/4/4B/36/36A/4A/48/48A/54A only) ; GB ,GB ; IP65 or IP67 approved Compiy with IEC ,10,07 for DAType only 86.7K hrs min. Telcordia SR33 (Bellcore) ; 00.8Khrs min. MILHDBK17F (5 ) ELG00 s eries 144W 150W W W W 150.1W File Name:ELG00SPEC

3 144~00W Constant Voltage Constant Current LED Driver ELG00 s eries Block Diagram PFC fosc : 50~10KHz PWM fosc : 60~130KHz I/P EMI FILTER & RECTIFIERS PFC CIRCUIT POWER SWITCHING RECTIFIERS & FILTER O.L.P. Vo Vo O.T.P. PFC CONTROL O.L.P. PWM & PFC CONTROL DETECTION CIRCUIT O.V.P. CASE :Protective Earth DRIVING METHODS OF LED MODULE This series is able to work in either Constant Current mode (a direct drive way) or Constant Voltage mode (usually through additional DC/DC driver) to drive the LEDs. 100 In the constant current region, the highest voltage at the output of the driver depends on the configuration of the end systems. Vo(%) 50 (min.) (A) Constant Voltage area (C) Hiccup Protection (B) Constant Current area Should there be any compatibility issues, please contact MEAN WELL Io(%) Typical output current normalized by rated current (%) File Name:ELG00SPEC

4 144~00W Constant Voltage Constant Current LED Driver ELG00 s eries DIMMING OPERATION ACN(Blue) Vo(Blue)(Black for 1V) ELG00 Vo(Brown)(Red for 1V) DIM(Gray)* DIM(Black)** 3 in 1 dimming function (for BType) Output constant current level can be adjusted by applying one of the three methodologies between DIM and DIM: 0 ~ 10VDC, or 10V PWM signal or resistance. Direct connecting to LEDs is suggested. It is not suitable to be used with additional drivers. Dimming source current from power supply: 100μA (typ.) Applying additive 0 ~ 10VDC Vo DIM DO NOT connect "DIM to Vo" Additive Voltage Output current (%) 100% % 80% 60% 50% 40% 30% 0% 10% 0% 0V 1V V 3V 4V 5V 6V 7V 8V 9V 10V Dimming input: Additive voltage * DIM for BType DA for DAType PROG for DType * *DIM for BType DA for DAType PROG for DType Output current (%) 100% % 80% 60% 50% 40% 30% 0% 10% 0% 0% 10% 0% 30% 40% 50% 60% 80% % 100% Duty cycle of additive 10V PWM signal dimming input Applying additive resistance: Vo DIM Vo DIM Applying additive 10V PWM signal (frequency range 100Hz ~ 3KHz): Vo Vo DIM Additive PWM signal DIM DO NOT connect "DIM to Vo" Vo DIM DO NOT connect "DIM to Vo" Additive Resistance Note : 1. Min. dimming level is about 8% and the output current is not defined when 0%< Iout<8%.. The output current could drop down to 0% when dimming input is about 0kΩ or 0Vdc, or 10V PWM signal with 0% duty cycle. Output current (%) 100% % 80% 60% 50% 40% 30% 0% 10% 0% Short 10K/N 0K/N 30K/N 40K/N 50K/N 60K/N 70K/N 80K/N K/N 100K/N (N=driver quantity forsynchronizeddimmingoperation) Dimming input: Additive resistance File Name:ELG00SPEC

5 144~00W Constant Voltage Constant Current LED Driver ELG00 series DALI Interface (primary side; for DAType) Apply DALI signal between DA and DA. DALI protocol comprises 16 groups and 64 addresses. First step is fixed at 8% of output. Smart timer dimming function (for DxxType by User definition) MEAN WELL Smart timer dimming primarily provides the adaptive proportion dimming profile for the output constant current level to perform up to 14 consecutive hours. 3 dimming profiles hereunder are defined accounting for the most frequently seen applications. If other options may be needed, please contact MEAN WELL for details. Ex : D01Type: the profile recommended for residential lighting Dimming Level(%) Set up for D01Type in Smart timer dimming software program: T1 T T3 T4 TIME** 06:00 07:00 11:00 LEVEL** 100% 50% Operating Time(HH:MM) **: TIME mahes Operating Time in the diagram whereas LEVEL mahes Dimming Level. Example: If a residential lighting application adopts D01Type, when turning on the power supply at 6:00pm, for instance: [1] The power supply will swih to the constant current level at 100% starting from 6:00pm. [] The power supply will swih to the constant current level at in turn, starting from 0:00am, which is 06:00 after the power supply turns on. [3] The power supply will swih to the constant current level at 50% in turn, starting from 1:00am, which is 07:00 after the power supply turns on. [4] The power supply will swih to the constant current level at in turn, starting from 5:00am, which is 11:00 after the power supply turns on. The constant current level remains till 8:00am, which is 14:00 after the power supply turns on. Ex: D0Type: the profile recommended for street lighting Dimming Level(%) Set up for D0Type in Smart timer dimming software program: T1 T T3 T4 T5 TIME** 01:00 03:00 8:00 11:00 LEVEL** 50% 80% 100% 60% 80% Operating Time(HH:MM) **: TIME mahes Operating Time in the diagram whereas LEVEL mahes Dimming Level. Example: If a street lighting application adopts D0Type, when turning on the power supply at 5:00pm, for instance: [1] The power supply will swih to the constant current level at 50% starting from 5:00pm. [] The power supply will swih to the constant current level at 80% in turn, starting from 6:00pm, which is 01:00 after the power supply turns on. [3] The power supply will swih to the constant current level at 100% in turn, starting from 8:00pm, which is 03:00 after the power supply turns on. [4] The power supply will swih to the constant current level at 60% in turn, starting from 1:00am, which is 08:00 after the power supply turns on. [5] The power supply will swih to the constant current level at 80% in turn, starting from 4:00am, which is 11:00 after the power supply turns on. The constant current level remains till 6:30am, which is 14:00 after the power supply turns on. File Name:ELG00SPEC

6 144~00W Constant Voltage Constant Current LED Driver ELG00 series Ex: D03Type: the profile recommended for tunnel lighting Dimming Level(%) Set up for D03Type in Smart timer dimming software program: T1 T T3 TIME** 01:30 11:00 LEVEL** 100% Operating Time(HH:MM) **: TIME mahes Operating Time in the diagram whereas LEVEL mahes Dimming Level. Example: If a tunnel lighting application adopts D03Type, when turning on the power supply at 4:30pm, for instance: [1] The power supply will swih to the constant current level at starting from 4:30pm. [] The power supply will swih to the constant current level at 100% in turn, starting from 6:00pm, which is 01:30 after the power supply turns on. [3] The power supply will swih to the constant current level at in turn, starting from 5:00am, which is 11:00 after the power supply turns on. The constant current level remains till 6:30am, which is 14:00 after the power supply turns on. File Name:ELG00SPEC

7 144~00W Constant Voltage Constant Current LED Driver ELG00 s eries OUTPUT LOAD vs TEMPERATURE 100 others VAC input only 1V VAC input only LOAD (%) VAC LOAD (%) VAC AMBIENT TEMPERATURE,Ta ( ) If ELG00 operates in Constant Current mode with the rated current, the maximum workable Ta is 50 for 1Vmodel whereas 60 for other models. (HORIZONTAL) Tcase ( ) (HORIZONTAL) STATIC CHARACTERISTIC 100 POWER FACTOR (PF) CHARACTERISTIC Tcase at 80 Constant Current Mode LOAD (%) PF V(00W) 30V(00W) 115V(150W) % 60% 80% % 100% INPUT VOLTAGE (V) 60Hz Derating is needed under low input voltage. LOAD THD TOTAL HARMONIC DISTORTION (THD) 48V Model, Tcase at 80 18% 16% 14% 1% 10% 8% 6% 4% 50% 60% 80% % 100% 77V(00W) 30V(00W) 115V(150W) EFFICIENCY(%) EFFICIENCY vs LOAD ELG00 series possess superior working efficiency that up to 93% can be reached in field applications. 48V Model, Tcase at V(00W) 30V(00W) 115V(150W) % 0% 30% 40% 50% 60% 80% % 100% LOAD LOAD File Name:ELG00SPEC

8 144~00W Constant Voltage Constant Current LED Driver ELG00 s eries LIFETIME LIFETIME(Kh) Tcase( ) File Name:ELG00SPEC

9 144~00W Constant Voltage Constant Current LED Driver ELG00 s eries MECHANICAL SPECIFICATION BlankType (for 1V model) CASE NO.: 6A Unit:mm 300± ±0 ACN(Blue) SJOW 17AWGxC 3 SJTW 14AWGxC Vo(Black) Vo(Red) 4ψ BlankType (for other models) 300± ±0 ACN(Blue) SJOW 17AWGxC 3 Vo(Blue) Vo(Brown) SJOW 17AWGxC 4ψ File Name:ELG00SPEC

10 144~00W Constant Voltage Constant Current LED Driver ELG00 s eries AType (for 1V model) 300± ±0 ACN(Blue) SJOW 17AWGxC 3 SJTW 14AWGxC Vo(Black) Vo(Red) 4ψ AType (for other models) 300± ±0 ACN(Blue) SJOW 17AWGxC SJOW 17AWGxC Vo(Blue) Vo(Brown) 4ψ File Name:ELG00SPEC

11 144~00W Constant Voltage Constant Current LED Driver ELG00 s eries B/DA/DType (for 1V model) 300± ±0 ACN(Blue) SJOW 17AWGxC 4ψ4.5 3 SJTW 14AWGxC SJOW 17AWGxC Vo(Black) Vo(Red) DIM( Gray)* DIM( Black)** * DIM for BType DA for DAType PROG for DType * *DIM for BType DA for DAType PROG for DType B/DA/DType (for other models) 300± ±0 ACN(Blue) SJOW 17AWGxC * DIM for BType DA for DAType PROG for DType * *DIM for BType DA for DAType PROG for DType ψ4.5 3 SJOW 17AWGxC SJOW 17AWGxC Vo(Blue) Vo(Brown) DIM( Gray)* DIM( Black)** File Name:ELG00SPEC

12 144~00W Constant Voltage Constant Current LED Driver ELG00 s eries 3Y Model (3wire input) 300± AC/N(Blue) AC/L(Brown) PE (Green/Yellow) SJOW 17AWGx3C 3 SJOW 17AWGxC 4ψ4.5 Note1: Please connect the case to PE for the complete EMC deliverance and safety use. Note: Please contact MEAN WELL for input wiring option with PE. INSTALLATION MANUAL Please refer to : File Name:ELG00SPEC