IR2304(S) & (PbF) HALF-BRIDGE DRIVER Product Summary
|
|
- Piers Perkins
- 6 years ago
- Views:
Transcription
1 Data Sheet No. PD60200 revb Features Floating channel designed for bootstrap operation to +600V. Tolerant to negative transient voltage dv/dt immune Gate drive supply range from 10 to 20V Under voltage lockout for both channels 3.3V, 5V, and 15V input logic input compatible Cross-conduction prevention logic Matched propagation delay for both channels Lower di/dt gate driver for better noise immunity Internal 100ns dead-time Output in phase with input Available in Lead-Free Description The IR2304(S) are a high voltage, high speed power MOSFET and IGBT driver with independent high and low side referenced output channels. Proprietary HVIC and latch immune CMOS technologies enable ruggedized monolithic construction. The logic input is compatible with standard CMOS or LSTTL output, down to 3.3V logic. The output driver features a high pulse current buffer stage designed for minimum driver cross-conduction. The floating channel can be used to drive an N-channel power MOSFET or IGBT in the high side configuration which operates up to 600 volts. Part IR2304(S) & (PbF) HALF-BRIDGE DRIVER Product Summary VOFFSET IO+/- (min) VOUT Delay Matching Internal deadtime ton/off (typ.) Package Input logic Crossconduction prevention logic 600V max. 60 ma/130 ma 10-20V 50 ns 100 ns 220/220 ns Dead-Time 8 Lead SOIC 2106/2301/2108/2109/2302/2304 Feature Comparison Ground Pins 2106/2301 / no none VSS/ 2108 Internal 540ns / yes Programmable 0.54~5 µs VSS/ 2109/2302 Internal 540ns IN/SD yes Programmable 0.54~5 µs VSS/ 2304 / yes Internal 100ns Block Diagram up to 600V Vcc VCC VB VS TO AD IR
2 Absolute Maximum Ratings Absolute maximum ratings indicate sustained limits beyond which damage to the device may occur. All voltage parameters are absolute voltages referenced to, all currents are defined positive into any lead. The thermal resistance and power dissipation ratings are measured under board mounted and still air conditions. Symbol Definition Min. Max. Units V S High side offset voltage V B - 25 V B V B High side floating supply voltage V High side floating output voltage V S V B V CC Low side and logic fixed supply voltage V Low side output voltage -0.3 V CC V IN Logic input voltage (, ) -0.3 V CC Com Logic ground V CC -25 V CC dv S /dt Allowable offset voltage SLEW RATE 50 V/ns P D Rth JA Package power T A +25 C Thermal resistance, junction to ambient 8-Lead SOIC 8-Lead SOIC W C/W T J Junction temperature 150 T S Storage temperature C T L Lead temperature (soldering, 10 seconds) 300 V Recommended Operating Conditions The input/output logic timing diagram is shown in figure 1. For proper operation the device should be used within the recommended conditions. The V S offset rating is tested with all supplies biased at 15V differential. Symbol Definition Min. Max. Units V B High side floating supply voltage V S + 10 V S + 20 V S High side floating supply offset voltage Note V High side () output voltage V S V B V Low side () output voltage V CC V V IN Logic input voltage (, ) V CC V CC Low side supply voltage T A Ambient temperature C Note 1: Logic operational for V S of -5 to +600V. Logic state held for V S of -5V to -V BS. 2
3 Static Electrical Characteristics V BIAS (V CC, V BS ) = 15V and T A = 25 C unless otherwise specified. The V IN, V TH and I IN parameters are referenced to. The V O and I O parameters are referenced to and V S is applicable to and. Symbol Definition Min. Typ. Max. Units Test Conditions V CCUV+ V CC and V BS supply undervoltage positive going V BSUV+ threshold V CCUV- V CC and V BS supply undervoltage negative going V BSUV- threshold V V CCUVH V CC supply undervoltage lockout hysteresis V BSUVH I LK Offset supply leakage current 50 V B = V S = 600V I QBS Quiescent V BS supply current µa V IN = 0V or 5V I QCC Quiescent V CC supply current V IN = 0V or 5V V IH Logic 1 input voltage 2.3 V IL Logic 0 input voltage 0.8 V OH High level output voltage, V BIAS - V O 2.8 V OL Low level output voltage, V O 1.2 I IN+ Logic 1 input bias current 5 40 V IN = 5V µa I IN- Logic 0 input bias current V IN = 0V I O+ Output high short circuit pulse current 60 I O- Output low short circuit pulsed current 130 V ma I O = 20mA V O = 0V PW 10 µs Dynamic Electrical Characteristics V BIAS (V CC, V BS ) = 15V, V S =, C L = 1000 pf and T A = 25 C unless otherwise specified. Symbol Definition Min. Typ. Max. Units Test Conditions ton Turn-on propagation delay V S = 0V toff Turn-off propagation delay V S = 0V or 600V tr Turn-on rise time tf Turn-off fall time DT Dead time MT Delay matching, HS & LS turn-on/off 50 ns 3
4 Functional Block Diagram 2304 UV DETECT R VB PULSE GENERATOR HV LEVEL SHIFTER PULSE FILTER R S Q VS SOT- THROUGH PREVENTION VCC UV DETECT DELAY Lead Definitions Symbol V CC V B V S Description Low side supply voltage Logic ground and low side driver return Logic input for high side gate driver output Logic input for low side gate driver output High side floating supply High side driver output High voltage floating supply return Low side driver output 4
5 Lead Assignments 1 VB 8 1 VB VCC VS 6 3 VCC VS Lead SOIC Internal Deadtime Figure 1. Input/Output Functionality Diagram 5
6 50% 50% t on t r t off t f 10% 90% 90% 10% Figure 2. Switching Time Waveforms 50% 50% DT 10% 90% DT 90% 10% Figure 3. Internal Deadtime Timing 6
7 Case outlines IR2304(S)&(PbF) (MS-001AB) A E 6 6X D e B H 0.25 [.010] A 6.46 [.255] 3X 1.27 [.050] FOOTPRINT 8X 0.72 [.028] 8X 1.78 [.070] DIM INCHES MILLIMETERS MIN MAX MIN MAX A A b c D E e.050 BASIC 1.27 BAS IC e1.025 BASIC BASIC H K L y e1 A C y K x 45 8X b A [.010] C A B 0.10 [.004] NOT ES: 1. DIMENSIONING & TOLERANCING PER ASME Y14.5M CONTROLG DIMENS ION: MILLIMETER 3. DIMENSIONS ARE SWN IN MILLIMETERS [INCHES]. 4. OUTE CONFORMS TO JEDEC OUTE MS-012AA. 8 Lead SOIC 8X L 7 8X c 4. OUTE CONFORMS TO JEDEC OUTE MS-012AA. 5 DIMENSION DOES NOT INCLUDE MOLD PROTRUSIONS. MOLD PROTRUSIONS NOT TO EXCEED 0.15 [.006]. 6 DIMENSION DOES NOT INCLUDE MOLD PROTRUSIONS. MOLD PROTRUSIONS NOT TO EXCEED 0.25 [.010]. 7 DIMENSION IS THE LENGTH OF LEAD FOR SOLDERING TO A SUBSTRATE (MS-012AA) 7
8 ORDER INFORMATION Basic Part (Non-Lead Free) Lead-Free Part IR2304 order IR2304 IR2304 order IR2304PbF 8-Lead SOIC IR2304S order IR2304S 8-Lead SOIC IR2304S order IR2304SPbF This product has been designed and qualified for the Industrial market. Qualification Standards can be found on IR s Web Site. Data and specifications subject to change without notice. IR WORLD HEADQUARTERS: 233 Kansas St., El Segundo, California 90245, USA Tel: (310) TAC Fax: (310) Visit us at for sales contact information. 09/10/04 8
Packages. Input logic. Part HIN/LIN yes
Data Sheet No. PD60209 revc Features Floating channel designed for bootstrap operation Fully operational to +600V Tolerant to negative transient voltage dv/dt immune Gate drive supply range from 10 to
More informationIR2302(S) & (PbF) HALF-BRIDGE DRIVER. Packages
Data Sheet No. PD7 Rev.A Features Floating channel designed for bootstrap operation Fully operational to +V Tolerant to negative transient voltage dv/dt immune Gate drive supply range from to V Undervoltage
More informationIRS2103(S)PbF HALF-BRIDGE DRIVER. Features. Product Summary. Packages. Description. Typical Connection. 600 V max. 130 ma/270 ma 10 V - 20 V V OFFSET
Data Sheet No. PD6263 Features Floating channel designed for bootstrap operation Fully operational to +6 V Tolerant to negative transient voltage, dv/dt immune Gate drive supply range from 1 V to 2 V Undervoltage
More informationIRS2181/IRS21814(S)PbF
Features Floating channel designed for bootstrap operation Fully operational to + V Tolerant to negative transient voltage, dv/dt immune Gate drive supply range from V to V Undervoltage lockout for both
More informationV OFFSET 600V max. I O +/- 130 ma / 270 ma V OUT. Packages
Data Sheet No. PD-S Features Floating channel designed for bootstrap operation Fully operational to +V Tolerant to negative transient voltage dv/dt immune Gate drive supply range from to 2V Undervoltage
More informationHIGH AND LOW SIDE DRIVER
Data Sheet No. PD-O Features Floating channel designed for bootstrap operation Fully operational to +V Tolerant to negative transient voltage dv/dt immune Gate drive supply range from to V Undervoltage
More informationPackages. Crossconduction. Input logic. Part. prevention logic COM HIN/LIN no none 21814
Data Sheet No. PD014-D Features Floating channel designed for bootstrap operation Fully operational to +00V Tolerant to negative transient voltage dv/dt immune Gate drive supply range from 10 to 20V Undervoltage
More informationIRS2104(S)PbF HALF-BRIDGE DRIVER. Features. Product Summary. Packages. Description. Typical Connection V OFFSET. 600 V max. 130 ma/270 ma 10 V - 20 V
Features Floating channel designed for bootstrap operation Fully operational to + V Tolerant to negative transient voltage, dv/dt immune Gate drive supply range from V to V Undervoltage lockout. V, V,
More informationIR2122(S) CURRENT SENSING SINGLE CHANNEL DRIVER
Preliminary Data Sheet No. PD60130-K CURRENT SENSING SINGLE CHANNEL DRIVER Features Floating channel designed for bootstrap operation Fully operational to +600V Tolerant to negative transient voltage dv/dt
More informationIRS2183/IRS21834(S)PbF
Data Sheet No. PD Features Floating channel designed for bootstrap operation Fully operational to + V Tolerant to negative transient voltage, dv/dt immune Gate drive supply range from V to V Undervoltage
More informationHalf-Bridge Driver IR25606SPBF. Features. Product Summary. Description. Package Options. Ordering Information
Half-Bridge Driver Features Floating channel designed for bootstrap operation Fully operational to +600V Tolerant to negative transient voltage dv/dt immune Gate drive supply range from 10 to 20V Undervoltage
More informationIRS2184/IRS21844(S)PbF
Data Sheet No. PD Features Floating channel designed for bootstrap operation Fully operational to + V Tolerant to negative transient voltage, dv/dt immune Gate drive supply range from V to V Undervoltage
More informationPackages. Feature Comparison. Crossconduction. Input logic. Part COM HIN/LIN no none 21064
DS No.PD6266 Rev A Features Floating channel designed for bootstrap operation Fully operational to +6 V Tolerant to negative transient voltage, dv/dt immune Gate drive supply range from 1 V to 2 V Undervoltage
More informationV OFFSET. Description
Features n Floating channel designed for bootstrap operation Fully operational to +6V Tolerant to negative transient voltage dv/dt immune n Gate drive supply range from 1 to 2V n Undervoltage lockout for
More informationIR2105 HALF BRIDGE DRIVER. Features. Product Summary. Packages. Description. Typical Connection
Features Floating channel designed for bootstrap operation Fully operational to +6V Tolerant to negative transient voltage dv/dt immune Gate drive supply range from to 2V Undervoltage lockout V Schmitt-triggered
More informationV OFFSET V OUT. Package V B V S
Features Gate drive supply range from V to V Undervoltage lockout for V BS and V CC. V and V input logic compatible Tolerant to negative transient voltage Matched propagation delays for all channels RoHS
More informationHigh and Low Side Driver
High and Low Side Driver Features Product Summary Floating channel designed for bootstrap operation Fully operational to +600 V Tolerant to negative transient voltage dv/dt immune Gate drive supply range
More information200V HO V DD V B HIN SD HIN SD V S TO LOAD LIN V CC V SS LIN COM LO
Data Sheet No. PD6195-E Features Floating channel designed for bootstrap operation Fully operational to Tolerant to negative transient voltage, dv/dt immune Gate drive supply range from 1 to V Undervoltage
More informationIRS21844MPBF HALF-BRIDGE DRIVER
November 19, 2010 HALF-BRIDGE DRIVER Features Floating channel designed for bootstrap operation Fully operational to + 600 V Tolerant to negative transient voltage, dv/dt immune Gate drive supply range
More informationV OFFSET. Packages. 14-Lead PDIP
Preliminary Data Sheet No. PD63 rev.p Features Floating channel designed for bootstrap operation Fully operational to +12V Tolerant to negative transient voltage dv/dt immune Gate drive supply range from
More informationIRS2117/IRS2118(S)PbF
Data Sheet No. PD227 IRS2117/IRS211(S)PbF Features Floating channel designed for bootstrap operation Fully operational to + V Tolerant to negative transient voltage, dv/dt immune Gate drive supply range
More informationIRS2110(-1,-2,S)PbF IRS2113(-1,-2,S)PbF HIGH AND LOW SIDE DRIVER. Features. Product Summary. Packages
Features Floating channel designed for bootstrap operation Fully operational to +5 V or +6 V Tolerant to negative transient voltage, dv/dt immune Gate drive supply range from 1 V to 2 V Undervoltage lockout
More informationIR2112(S) HIGH AND LOW SIDE DRIVER. Features. Product Summary. Packages. Description. Typical Connection V OFFSET. 600V max. 200 ma / 420 ma 10-20V
Features Floating channel designed for bootstrap operation Fully operational to +V Tolerant to negative transient voltage dv/dt immune Gate drive supply range from 1 to 2V Undervoltage lockout for both
More informationIR2112(S) & (PbF) HIGH AND LOW SIDE DRIVER
Features Floating channel designed for bootstrap operation Fully operational to +6V Tolerant to negative transient voltage dv/dt immune Gate drive supply range from 1 to 2V Undervoltage lockout for both
More informationHigh and Low Side Driver
High and Low Side Driver Features Product Summary Floating channel designed for bootstrap operation Fully operational to +1200 V Tolerant to negative transient voltage dv/dt immune Gate drive supply range
More informationHIGH AND LOW SIDE DRIVER. Product Summary VOFFSET VOUT. Description
Features n Floating channel designed for bootstrap operation Fully operational to +4V Tolerant to negative transient voltage dv/dt immune n Gate drive supply range from 1 to 2V n Undervoltage lockout for
More informationHigh and Low Side Driver
High and Low Side Driver Features Product Summary Floating channel designed for bootstrap operation Fully operational to 200V Tolerant to negative transient voltage, dv/dt immune Gate drive supply range
More informationIRS2113MPBF HIGH- AND LOW-SIDE DRIVER
February 8, 2012 IRS2113MPBF HIGH- AND LOW-SIDE DRIVER Features Floating channel designed for bootstrap operation Fully operational to +600 V Tolerant to negative transient voltage dv/dt immune Gate drive
More informationIRS212(7, 71, 8, 81)(S)PbF
CURRENT SENSG SGLE CHANNEL DRIVER Features Floating channel designed for bootstrap operation Fully operational to + V Tolerant to negative transient voltage dv/dt immune Application-specific gate drive
More informationIR2110 HIGH AND LOW SIDE DRIVER. Features. Product Summary. Packages. Description. Typical Connection. 500V max. V OFFSET 10-20V VOUT.
Features n Floating channel designed for bootstrap operation Fully operational to +5V Tolerant to negative transient voltage dv/dt immune n Gate drive supply range from 1 to 2V n Undervoltage lockout for
More informationNot recommended for new designs. No replacement is available
Aug 2, 28 IRS218S SINGLE HIGH SIDE DRIVER IC IC Features Gate drive supply range from 1 V to 2 V Undervoltage lockout for V BS and V CC 3.3 V and V input logic compatible Tolerant to negative transient
More informationIR20153S & (PbF) HIGH SIDE DRIVER WITH RECHARGE
Preliminary Data Sheet PD60214 Rev B Features Floating channel designed for bootstrap operation Fully operational up to 150V Tolerant to negative transient voltage, dv/dt immune Gate drive supply range
More informationIR2106/IR21064 IR2107/IR21074 HIGH AND LOW SIDE DRIVER
Features Floating channel designed for bootstrap operation Fully operational to +00V Tolerant to negative transient voltage dv/dt immune Gate drive supply range from 0 to 0V Undervoltage lockout for both
More informationHIGH VOLTAGE HALF BRIDGE
Preliminary Data Sheet No. PD0-D IR0HDC0U-P HIGH LTAGE HALF BRIDGE Features Output Power IGBT s in half-bridge configuration 55V rated breakdown voltage High side gate drive designed for bootstrap operation
More informationHVIC TM. Single Low-Side Driver IC IRS44273LPBF. Product Summary
PBF HVIC TM Features CMOS Schmitt-triggered inputs Under voltage lockout 3.3V logic compatible Output in phase with input Leadfree, RoHS compliant Typical Applications General Purpose Gate Driver DC-DC
More informationVCC 5 OUT 4. Orderable Part Number Form Quantity IR44272LPBF SOT23-5 Tape and Reel 3000 IR44272LTRPBF
HVIC TM Features Wide VCC range (5V to 20V) CMOS Schmitt-triggered inputs Under voltage lockout 3.3V logic compatible Enable input Output in phase with inputs Leadfree, RoHS compliant SOT-23 Gate Driver
More informationRADIATION HARDENED HIGH AND LOW SIDE GATE DRIVER Product Summary. Description
Features RADIATION HARDENED HIGH AND W SIDE GATE DRIER Product Summary n Total dose capability to 100 krads(si) n Floating channel designed for bootstrap operation n Fully operational to +400 n Tolerant
More informationIR3101 Series 1.6A, 500V
Half-Bridge FredFet and Integrated Driver Features Output power FredFets in half-bridge configuration High side gate drive designed for bootstrap operation Bootstrap diode integrated into package. Lower
More informationHIGH VOLTAGE HALF BRIDGE
Preliminary Data Sheet No. PD0-C IR0HDC0U-P HIGH LTAGE HALF BRIDGE Features Output Power IGBT s in half-bridge configuration 00V rated breakdown voltage High side gate drive designed for bootstrap operation
More informationIR4426/IR4427/IR4428(S) & (PbF) DUAL LOW SIDE DRIVER
Data Sheet No. PD60177 Rev. F Features Gate drive supply range from 6 to 20V CMOS Schmitt-triggered inputs Matched propagation delay for both channels Outputs out of phase with inputs (IR4426) Outputs
More information100V VCC VB 6 IRS10752 HO 5 VS 4. To Load. IRS10752LPBF SOT-23-6L Tape and Reel 3000 IRS10752LTRPBF
HVIC TM Features SOT-23 High-Side Gate Driver IC Description Floating gate driver designed for bootstrap operation Fully operational to +100 V Excellent dv/dt immunity Excellent negative V S transient
More informationRADIATION HARDENED HIGH AND LOW SIDE GATE DRIVER
Features RADIATION HARDENED HIGH AND W SIDE GATE DRIER n Total dose capability to 100 krads(si) n Floating channel designed for bootstrap operation n Fully operational to +400 n Tolerant to negative transient
More informationSELF-OSCILLATING HALF-BRIDGE DRIVER
Features Floating channel designed for bootstrap operation Fully operational to +600V olerant to negative transient voltage dv/dt immune Undervoltage lockout Programmable oscillator frequency 1 f = 1.4
More informationStandard Pack Form Quantity
Dual Low Side Driver Features Product Summary Gate drive supply range from 6V to 20V CMOS Schmitt-triggered inputs Matched propagation delay for both channels Outputs in phase with inputs I O+/- 1.5A /
More informationAutomotive Grade AUIRS2301S HIGH AND LOW SIDE DRIVER
January 14, 2011 Automotive Grade AUIRS2301S HIGH AND LOW SIDE DRIVER Features Floating channel designed for bootstrap operation Fully operational to +600V Tolerant to negative transient voltage dv/dt
More informationIR2175(S) & (PbF) LINEAR CURRENT SENSING IC
Data Sheet No. PD0208 Rev. E IR21(S) & (PbF) LINEAR CURRENT SENSING IC Features Floating channel up to +00V Monolithic integration Linear current feedback through shunt resistor Direct digital PWM output
More informationSelf-Oscillating Half-Bridge Driver
Self-Oscillating Half-Bridge Driver Features Product Summary Floating channel designed for bootstrap operation Integrated 600V half-bridge gate driver 15.6V zener clamp on Vcc True micropower start up
More information3-PHASE BRIDGE DRIVER
Data Sheet No. PD-6.33E IR2132 Features n Floating channel designed for bootstrap operation Fully operational to +6V Tolerant to negative transient voltage dv/dt immune n Gate drive supply range from 1
More informationSELF-OSCILLATING HALF BRIDGE
Features Output Power MOSFETs in half-bridge configuration High side gate drive designed for bootstrap operation Bootstrap diode integrated into package (HD type) Accurate timing control for both Power
More informationAutomotive Grade AUIRS211(0,3)S HIGH- AND LOW-SIDE DRIVER
Dec. 13, 2009 Automotive Grade AUIRS211(0,3)S HIGH- AND LOW-SIDE DRIVER Features Floating channel designed for bootstrap operation Fully operational to +500 V or +600 V Tolerant to negative transient voltage
More informationAutomotive Grade AUIRS21811S HIGH AND LOW SIDE DRIVER
July 28 th, 2010 Automotive Grade AUIRS21811S HIGH AND LOW SIDE DRIVER Features Floating channel designed for bootstrap operation Fully operational to +600 V Tolerant to negative transient voltage, dv/dt
More informationIRS21956S Floating Input, High and Low(Dual mode) Side Driver
January 16, 2009 Datasheet No. - PD97375 IRS21956S Floating Input, High and Low(Dual mode) Side Driver Features Low side programmable ramp gate drive Low side generic gate drive integrated using the same
More informationADVANCE INFO TF Half -Bridge Driver. Features. Description. Applications. Ordering Information. Typical Application ADVANCE INFO.
Half -Bridge Driver Features Floating high-side driver in bootstrap operation to 600V Drives two N-channel MOSFETs or IGBTs in a half bridge configuration Outputs tolerant to negative transients Programmable
More informationIRS2136/IRS21362/IRS21363/IRS21365/ IRS21366/IRS21367/IRS21368 (J&S) PbF 3-PHASE BRIDGE DRIVER
Data Sheet No. PD6272 IRS2136/IRS21362/IRS21363/IRS21365/ IRS21366/IRS21367/IRS21368 (J&S) PbF 3-PHASE BRIDGE DRIVER Features Floating channel designed for bootstrap operation Fully operational to +6 V
More informationHIGH SPEED, 100V, SELF OSCILLATING 50% DUTY CYCLE, HALF-BRIDGE DRIVER
Data Sheet No. 60206 HIGH SPEED, 100V, SELF OSCILLATING 50% DUTY CYCLE, HALF-BRIDGE DRIVER Features Simple primary side control solution to enable half-bridge DC-Bus Converters for 48V distributed systems
More informationIR2153/IR2153D SELF-OSCILLATING HALF-BRIDGE DRIVER. Features. Product Summary. Packages. Description. Typical Connections
Features Floating channel designed for bootstrap operation Fully operational to 600V Tolerant to negative transient voltage dv/dt immune Undervoltage lockout Programmable oscillator frequency 1 f = 1.4
More informationIRS21867S HIGH AND LOW SIDE DRIVER
31 May, 2011 IRS21867S HIGH AND LOW SIDE DRIVER Features Floating channel designed for bootstrap operation Fully operational to +600 V Tolerant to negative transient voltage, dv/dt immune Low VCC operation
More informationAutomotive Grade AUIRS2112S HIGH- AND LOW-SIDE DRIVER
August 29 th, 211 Automotive Grade AUIRS2112S HIGH- AND LOW-SIDE DRIVER Features Drives IGBT/MOSFET power devices Floating channel designed for bootstrap operation Fully operational to +6 V Tolerant to
More informationFAN7391 High-Current, High & Low-Side, Gate-Drive IC
FAN7391 High-Current, High & Low-Side, Gate-Drive IC Features Floating Channels for Bootstrap Operation to +6 V Typically 4.5 A / 4.5 A Sourcing / Sinking Current Driving Capability Common-Mode dv/dt Noise-Canceling
More informationTF2103. Half-Bridge Gate Driver. Description. Features. Applications. Ordering Information. Typical Application. Advance Info.
Features Floating high-side driver in bootstrap operation to 600V Drives two N-channel MOSFETs or IGBTs in a half bridge configuration 290mA source/600ma sink output current capability Outputs tolerant
More informationADVANCE DATA DCP1 VCC 1 COM 2 FMIN 3 VB 8 HO 7 VS 6 IR2520D CVCC RFMIN CVCO
ADVANCE DATA Data Sheet No. PD0 IR0D(S) ADAPTIVE BALLAST CONTROL IC Features 00V Driver Integrated Bootstrap Diode Adaptive zero-voltage switching (Z) Internal Crest Factor Over-Current Protection 0 to
More informationAutomotive Grade AUIRS212(71,81) June 12 th, Over Current Protected Single Channel Driver. Product Summary
June 12 th, 2012 Automotive Grade AUIRS212(7,71,8,81)S Over Current Protected Single Channel Driver Features Floating channel designed for bootstrap operation Fully operational to +600 V Tolerant to negative
More informationHALF-BRIDGE DRIVER. Features. Packages. Product Summary
June 1, 211 HALF-BRIDGE DRIVER Features Floating channel designed for bootstrap operation Fully operational to +6 V Tolerant to negative transient voltage dv/dt immune Gate drive supply range from 1 V
More informationIX2113BTR. 600V High and Low Side Gate Driver INTEGRATED CIRCUITS DIVISION. Description. Driver Characteristics. Features. Ordering Information
V High and Low Side Gate Driver Driver Characteristics Parameter Rating Units V OFFSET V I O +/- (Source/Sink) / A V OUT - V t on /t off / ns Delay Matching (Max) ns Features Floating Channel for Bootstrap
More informationIR2153Z PD SELF-OSCILLATING HALF-BRIDGE DRIVER. Features. Product Summary
Features Floating channel designed for bootstrap operation Fully operational to +600 Tolerant to negative transient voltage d/dt immune Undervoltage lockout Programmable oscillator frequency 1 f = 1.4
More informationIRS211(7,71,8)(S) SINGLE CHANNEL DRIVER
February 18, 29 SINGLE CHANNEL DRIVER IC Features Floating channel designed for bootstrap operation Fully operational to +6V Tolerant to negative transient voltage, dv/dt immune Gate drive supply range
More informationFAN7361, FAN7362 High-Side Gate Driver
FAN7361, FAN7362 High-Side Gate Driver Features! Floating Channel Designed for Bootstrap Operation to +600V! Typically 250mA/500mA Sourcing/Sinking Current Driving Capability! Common-Mode dv/dt Noise Canceling
More informationFAN73901 High- and Low-Side, Gate-Drive IC
FAN7391 High- and Low-Side, Gate-Drive IC Features Floating Channels for Bootstrap Operation to +6 V Typically 2.5 A / 2.5 A Sourcing/Sinking Current Driving Capability Common-Mode dv/dt Noise Canceling
More information3-PHASE BRIDGE DRIVER
Features Floating channel designed for bootstrap operation. Fully operational to +6 V Tolerant to negative transient voltage, dv/dt immune Gate drive supply range from 1 V to 2 V (IRS2136D/ IRS21368D),11.5
More informationIRS4426/IRS4427/IRS4428 DUAL LOW SIDE DRIVER
February 28, 2011 Datasheet No 97481 IRS4426/IRS4427/IRS4428 DUAL LOW SIDE DRIVER Features Gate drive supply range from 6 V to 20 V CMOS Schmitt-triggered inputs 3.3V and 5V logic compatible Two independent
More informationFAN7390 High-Current, High and Low Side, Gate-Drive IC
FAN739 High-Current, High and Low-Side, Gate-Drive IC Features! Floating Channels for Bootstrap Operation to +6V! Typically 4.5A/4.5A Sourcing/Sinking Current Driving Capability! Common-Mode dv/dt Noise
More informationSELF-OSCILLATING HALF-BRIDGE DRIVER V OFFSET. Packages
Preliminary Data Sheet No. PD60131L SELFOSCILLATING HALFBIDGE DIVE Features Integrated 600V halfbridge gate driver 15.6V zener clamp on Vcc True micropower start up Tighter initial deadtime control Low
More informationHigh-Current, High & Low-Side, Gate-Drive IC
FAN739 High-Current, High & Low-Side, Gate-Drive IC Features Floating Channels for Bootstrap Operation to +6V Typically 4.5A/4.5A Sourcing/Sinking Current Driving Capability Common-Mode dv/dt Noise Canceling
More informationApplication Note AN-1125
Application Note AN- IRS(7,8,7) and IR(7,8,7) Comparison By Jason Nguyen, Fang, David New Table of Contents Page Introduction... Block Diagram... Electrical Characteristic Differences... Figures... Summary...
More informationFAN7371 High-Current High-Side Gate Drive IC
FAN1 High-Current High-Side Gate Drive IC Features! Floating Channel for Bootstrap Operation to +V! A/A Sourcing/Sinking Current Driving Capability! Common-Mode dv/dt Noise Canceling Circuit!.V and V Input
More informationIRS SOT-23 High-Side Gate Driver IC IRS10752LPBF. Features. Description. Package Options. Applications. Typical Connection Diagram
µhvic TM Features SOT-23 High-Side Gate Driver IC Description Floating gate driver designed for bootstrap operation Fully operational to +100 V Excellent dv/dt immunity Excellent negative V S transient
More informationFAN7392 High-Current, High- and Low-Side, Gate-Drive IC
FAN7392 High-Current, High- and Low-Side, Gate-Drive IC Features Floating Channel for Bootstrap Operation to +6V 3A/3A Sourcing/Sinking Current Driving Capability Common-Mode dv/dt Noise Canceling Circuit
More informationSELF-OSCILLATING HALF-BRIDGE DRIVER
Features Floating channel designed for bootstrap operation Fully operational to +600V olerant to negative transient voltage dv/dt immune Undervoltage lockout Programmable oscillator frequency 1 f = 1.4
More informationTypical Application Circuit V CC HIN,, LIN,, FAULT EN GND Pin Description V CC HIN,, LIN,, FAULT EN RCIN ITRIP V SS PIN NO. PIN NAME PIN FUNCTION V B,
SOIC8 -Phase Bridge Driver General Description The is a high voltage, high speed power MOSFET and IGBT drivers with a three independent high and low side referenced output channels for -phase applications.
More informationIX2127NTR. High-Voltage Power MOSFET & IGBT Driver INTEGRATED CIRCUITS DIVISION. Description. Driver Characteristics. Features.
High-Voltage Power MOSFET & IGBT Driver Driver Characteristics Parameter Rating Units V OFFSET 6 V I O +/- (Source/Sink) 25/5 ma V th 25 mv t ON / t OFF (Typical) 1 ns Features Floating Channel Designed
More informationIRS2130D/IRS21303D/IRS2132D
Data Sheet No. PD6256 reva IRS213D/IRS2133D/IRS2132D 3-PHASE BRIDGE DRIER Features Floating channel designed for bootstrap operation Fully operational to +6 Tolerant to negative transient voltage, d/dt
More informationFAN73932 Half-Bridge Gate Drive IC
FAN73932 Half-Bridge Gate Drive IC Features Floating Channel for Bootstrap Operation to +600V Typically 2.5A/2.5A Sourcing/Sinking Current Driving Capability Extended Allowable Negative V S Swing to -9.8V
More informationHIGH SPEED, 100V, SELF OSCILLATING 50% DUTY CYCLE, FULL-BRIDGE DRIVER
查询 IR2086S 供应商 捷多邦, 专业 PCB 打样工厂,24 小时加急出货 Data Sheet PD No.60226 IR2086S HIGH SPEED, 100V, SELF OSCILLATING 50% DUTY CYCLE, FULL-BRIDGE DRIVER Features Simple primary side control solution to enable full-bridge
More informationPin Definition: 1. VCC 8. VB 2. RT 7. HO 3. CT 6. VS 4. COMP 5. LO
DIP-8 SOP-8 Pin Definition: 1. VCC 8. VB 2. RT 7. HO 3. CT 6. VS 4. COMP 5. LO Description is a high voltage, high speed, self-oscillating power MOSFET and IGBT driver with both high and low side referenced
More informationIPS042G DUAL FULLY PROTECTED POWER MOSFET SWITCH. Product Summary
Data Sheet No.PD 653-J IPS4G DUAL FULLY PROTECTED POWER MOSFET SWITCH Features Over temperature shutdown Over current shutdown Active clamp Low current & logic level input E.S.D protection Description
More informationFeatures. Product Marking Reel Size (inch) Tape Width (mm) Quantity per Reel DGD2103MS8-13 DGD2103M ,500
HALF-BRIDGE GATE DRIVER IN SO-8 Description The is a high-voltage / high-speed gate driver capable of driving N-channel MOSFETs and IGBTs in a half-bridge configuration. High voltage processing techniques
More informationIntegrated Power Module for Small Appliance Motor Drive Applications
2.2Ω, 500V Integrated Power Module for Small Appliance Motor Drive Applications Description IRSM505-035 and IRSM515-035 are 3-phase Integrated Power Modules (IPM) designed for advanced appliance motor
More informationIX2127NTR. High-Voltage Power MOSFET & IGBT Driver INTEGRATED CIRCUITS DIVISION. Description. Driver Characteristics. Features.
High-Voltage Power MOSFET & IGBT Driver Driver Characteristics Parameter Rating Units V OFFSET 6 V I O +/- (Source/Sink) 25/5 ma V th 25 mv t ON / t OFF (Typical) 1 ns Features Floating Channel Designed
More informationSELF-OSCILLATING FULL-BRIDGE DRIVER IC
Data Sheet No. PD60259 ADVANCE INFOMATION IS2453D(S)PbF SELF-OSCILLATING FULL-BIDGE DIVE IC Features Integrated 600V Full-Bridge Gate Driver CT, T programmable oscillator 15.6V Zener Clamp on Micropower
More informationFeatures. Product Marking Reel Size (inches) Tape Width (mm) Quantity per Reel DGD2304S8-13 DGD ,500
HALF-BRIDGE GATE DRIVER IN SO-8 Description Features The is a high voltage / high speed gate driver capable of driving N-channel MOSFETs and IGBTs in a half bridge configuration. High voltage processing
More informationFeatures. Product Marking Reel Size (inches) Tape Width (mm) Quantity per Reel DGD21844S14-13 DGD ,500
HALF- BRIDGE GATE DRIVER IN SO-14 Description The is a high voltage / high speed gate driver capable of driving N-Channel MOSFETs and IGBTs in a half bridge configuration. High voltage processing techniques
More informationIR2153/IR2153D SELF-OSCILLATING HALF-BRIDGE DRIVER. Features. Product Summary. Packages. Description. Typical Connections
Features Integrated 600V halfbridge gate driver 15.6V zener clamp on Vcc True micropower start up Tighter initial deadtime control Low temperature coefficient deadtime Shutdown feature (1/6th Vcc) on C
More informationIRS2453(1)D(S) Product Summary
Features Integrated 600 V full-bridge gate driver CT, RT programmable oscillator 15.6 V Zener clamp on V CC Micropower startup Logic level latched shutdown pin Non-latched shutdown on CT pin (1/6th V CC
More informationApplication Note AN-1114
Application Note AN- IRS and IR Comparison By Jason Nguyen, Min Fang, David New Table of Contents Page Introduction... Block Diagrams... Electrical Characteristic Differences... Figures... Summary...9
More informationApplication Note AN-1113
Application Note AN- IRS and IR Comparison By Jason Nguyen, Min Fang, David New Table of Contents Page Introduction... Block Diagrams... Electrical Characteristic Differences... Figures... Summary...8
More informationFAN7191-F085 High-Current, High and Low Side Gate Drive IC
FAN7191-F85 High-Current, High and Low Side Gate Drive IC Features! Floating Channel for Bootstrap Operation to +6V! 4.5A Sourcing and 4.5A Sinking Current Driving Capability! Common-Mode dv/dt Noise Cancelling
More informationIX2120BTR. 1200V High and Low Side Gate Driver INTEGRATED CIRCUITS DIVISION. Description. Driver Characteristics. Features. Ordering Information
IX High and Low Side Gate Driver Driver Characteristics Parameter Rating Units OFFSET I O +/- (Source/Sink) / A OUT - t on /t off / ns Features Floating Channel for Bootstrap Operation to + Outputs Capable
More informationData sheet, Rev. 2.1, Dec ED003L06-F. Integrated 3 Phase Gate Driver. Power Management & Drives
Data sheet, Rev. 2.1, Dec 2008 6ED003L06-F Power Management & Drives N e v e r s t o p t h i n k i n g 6ED003L06-F Revision History: 2009-07 Rev. 2.1 Previous Version: 2.0 Page Subjects (major changes
More information1 RevH,
PD-94640 RevH IRAMS10UP60A www.irf.com 1 RevH,.011508 Internal Electrical Schematic - IRAMS10UP60A V + (10) VRU (12) VRV (13) VRW (14) Rg1 Rg3 Rg5 VB1 (7) U, VS1 (8) VB2 (4) V, VS2 (5) VB3 (1) W, VS3 (2)
More informationIR2172 LINEAR CURRENT SENSING IC. Features. Product Summary
Features Floating channel up to +00V Monolithic integration Linear current feedback through shunt resistor Direct digital PWM output for easy interface Low IQBS allows the boot strap power supply Independent
More information