Information. AC Servo Motor Driver Series LECS. Incremental Type. Absolute Type. Series LECSA (Pulse Input Type/Positioning Type)

Size: px
Start display at page:

Download "Information. AC Servo Motor Driver Series LECS. Incremental Type. Absolute Type. Series LECSA (Pulse Input Type/Positioning Type)"

Transcription

1 Information SM orporation of America/ SM Pneumatics (anada) Ltd./ (800) SM.SM1 (72-721) For International inquires: SM orporation All Rights Reserved 11-E597 QT-RRD-5M A Servo Motor Driver Series LES Power Supply oltage 100 to 120 A 200 to 230 A Motor apacity 100/200/400 Incremental Type Series LESA (Pulse Input Type/Positioning Type) p to 7 positioning points by point table Input type: Pulse input ontrol encoder: Incremental 17-bit encoder (Resolution: pulse/rev) Parallel input: inputs output: 4 outputs Series LESB (Pulse Input Type) Input type: Pulse input ontrol encoder: Absolute 18-bit encoder (Resolution: pulse/rev) Parallel input: 10 inputs output: outputs Series LES (-Link Direct Input Type) Absolute Type Position data/speed data setting and operation start/stop Positioning by up to 255 point tables (when 2 stations occupied) p to 32 drivers connectable (when 2 stations occupied) with -Link communication Applicable Fieldbus protocol: -Link (er. 1.10, max. communication speed: 10 Mbps) ontrol encoder: Absolute 18-bit encoder (Resolution: pulse/rev) Series LESS (SSNET III Type) ompatible with Mitsubishi Electric, s servo system Reduced wiring and SSNET III optical cable for one-touch connection SSNET III optical cable provides enhanced noise resistance p to 1 drivers connectable with SSNET III communication Applicable Fieldbus protocol: SSNET III (High-speed optical communication, max. bidirectional communication speed: 100 Mbps) ontrol encoder: Absolute 18-bit encoder (Resolution: pulse/rev) 1

2 Series LES Incremental encoder compatible Series LESA (Pulse input type/positioning type) Supplied by customer Power Single phase 100 to 120 A (50/0 Hz) 200 to 230 A (50/0 Hz) Main circuit Page 9 System onstruction Driver Supplied by customer ontrol circuit 24 D Setup software Page 1 Option (MR onfigurator TM ) Part no.: LE-MR-SETP221 Option Page 15 Part no.: LE-MR-RB- Motor cable Standard cable LE-SM-S Page 15 Robotic cable LE-SM-R Lock cable Page 15 Standard cable Robotic cable LE-SB-S LE-SB-R Electric actuators Rod type Series LEY Guide rod type/ In-line motor type ontrol Page 9 circuit Option Page 15 I/O Part no.: LE-SNA P Order SB cable (Part no.: LE-MR-J3SB) separately to use this software. SB cable Page 1 Part no.: LE-MR-J3SB Supplied by customer Encoder cable Standard cable LE-SE-S Page 15 Robotic cable LE-SE-R PL (Positioning unit) Power for I/O signal 24 D Absolute encoder compatible Series LESB (Pulse input type) Supplied by customer Power Single phase 100 to 120 A (50/0 Hz) 200 to 230 A (50/0 Hz) Three phase 200 to 230 A (50/0 Hz) Option Page 15 Part no.: LE-MR-RB- Motor cable Page 15 Standard cable Robotic cable LE-SM-S LE-SM-R Lock cable Page 15 Standard cable Robotic cable LE-SB-S LE-SB-R Electric actuators Rod type Series LEY Guide rod type/ In-line motor type Main circuit ontrol circuit Page 10 Page 10 Motor Page 10 Driver SB cable Page 1 Part no.: LE-MR-J3SB Analog monitor output RS-422 communication Option Page 15 I/O Part no.: LE-SNB Setup software Option Page 1 (MR onfigurator TM ) Part no.: LE-MR-SETP221 P Order SB cable (Part no.: LE-MR-J3SB) separately to use this software. Supplied by customer PL (Positioning unit) Encoder cable Standard cable LE-SE-S Page 15 Robotic cable LE-SE-R Battery Page 1 Part no.: (LE-MR-J3BAT) Power for I/O signal 24 D 2

3 Absolute encoder compatible Series LES (-Link direct input type) Supplied by customer Power Single phase 100 to 120 A (50/0 Hz) 200 to 230 A (50/0 Hz) Three phase 200 to 230 A (50/0 Hz) Main circuit System onstruction Page 10 Driver System onstruction Series LES SB cable Page 1 Part no.: LE-MR-J3SB Option Setup software Page 1 (MR onfigurator TM ) Part no.: LE-MR-SETP221 Option Page 15 Part no.: LE-MR-RB- RS-422 communication Motor cable Standard cable Page 15 Robotic cable LE-SM-S LE-SM-R Lock cable Page 15 Standard cable Robotic cable LE-SB-S LE-SB-R Electric actuator ontrol circuit Page 10 Motor Page 10 -Link Option Page 15 I/O Part no.: LE-SNA P Supplied by customer PL (-Link master unit) Encoder cable Standard cable LE-SE-S Page 15 Robotic cable LE-SE-R Battery Page 1 Part no.: (LE-MR-J3BAT) Power for I/O signal 24 D Absolute encoder compatible Series LESS (SSNET III type) Supplied by customer Power Single phase 100 to 120 A (50/0 Hz) 200 to 230 A (50/0 Hz) Main circuit Page 10 Driver SB cable Page 1 Part no.: LE-MR-J3SB Option Setup software Page 1 (MR onfigurator TM ) Part no.: LE-MR-SETP221 Three phase 200 to 230 A (50/0 Hz) Option Page 15 Part no.: LE-MR-RB- P Motor cable Standard cable Page 15 Robotic cable LE-SM-S LE-SM-R Lock cable Page 15 Standard cable Robotic cable LE-SB-S LE-SB-R Electric actuator Encoder cable Page 15 Standard cable Robotic cable LE-SE-S LE-SE-R ontrol circuit Page 10 Motor Page 10 Battery Page 1 Part no.: (LE-MR-J3BAT) Option I/O Page 15 Part no.: LE-SNS A B A Option SSNET III optical cable Page 15 Part no.: LE-SS- PL (Positioning unit/ Motion controller) Power for I/O signal 24 D Supplied by customer 3

4 Dimensions LESA Driver A B S 2 x ø Mounting hole (Bearing surface thickness 5) A Servo Motor Driver Incremental Type Series LESA (Pulse Input Type/Positioning Type) Absolute Type Series LESB/LES/LESS LES A 1 Driver type Pulse input type/positioning type (For incremental encoder) Pulse input type (For absolute encoder) -Link direct input type (For absolute encoder) SSNET III type (For absolute encoder) 1 2 Power voltage 100 to 120 A, 50/0 Hz 200 to 230 A, 50/0 Hz How to Order S (Pulse Input Type) (-Link Direct Input Type) (SSNET III Type) ompatible motor type Symbol Type S1 A servo motor (S2) S3 A servo motor (S3) S4 1 A servo motor (S4) S5 A servo motor (S) S7 A servo motor (S7) S8 1 A servo motor (S8) 1 Not applicable for Series LEY LESA LESB LES LESS apacity Encoder Incremental Absolute onnector name Description I/O signal Encoder SB communication Main circuit ontrol circuit 5 LESB ø Mounting hole (Bearing surface thickness 4) (For LESB -S5, S7) 170 (For LESB -S8) 15 NP3 N5 N N onnector name Description I/O signal Encoder RS-422 communication N4 Battery N5 SB communication N Analog monitor Main circuit ontrol circuit NP3 Servo motor 4 Battery 1 1 Battery included. (14)

5 A Servo Motor Driver Series LES Dimensions LES 2 x ø (Bearing surface thickness 4) (For LES -S5, S7) 170 (For LES -S8) 15 N5 N N4 Battery 18 onnector name N4 N5 N NP3 Description -Link Encoder RS-422 communication Battery SB communication I/O signal Main circuit ontrol circuit Servo motor Battery included. LESS 2 x ø (Bearing surface thickness 4) (For LESS -S5, S7) 170 (For LES -S8) 15 NP3 N5 A B N4 Battery 18 onnector name A B N4 N5 NP3 Description Front axis for SSNET III optical cable Rear axis for SSNET III optical cable Encoder I/O signal Battery SB communication Main circuit ontrol circuit Servo motor Battery included. 5

6 Series LES Specifications Series LESA Model ompatible motor capacity [] ompatible encoder Main ontrol Power voltage [] Allowable voltage fluctuation [] Rated current [A] ontrol voltage [] Allowable voltage fluctuation [] Rated current [A] Parallel input Parallel output Max. input pulse frequency [pps] In-position range setting [pulse] Error excessive Function Torque limit Setting communication Operating temperature range Operating humidity range [%RH] Storage temperature range Storage humidity range [%RH] Insulation resistance [MΩ] eight LESA1-S1 100 LESA1-S3 200 Single phase 100 to 120 A (50/0 Hz) Single phase 85 to 132 A LESA2-S1 100 Incremental 17-bit encoder (Resolution: pulse/rev) Single phase 200 to 230 A (50/0 Hz) Single phase 170 to 253 A D 21. to 2.4 D 0.5 inputs 4 outputs 1 M (when differential receiver), 200 k (when open collector) 0 to ±5535 (ommand pulse unit) ±3 rotations Parameter setting SB communication 32 to 131 F (0 to 55 ) (No freezing) 90 or less (No condensation) 4 to 149 F ( 20 to 5 ) (No freezing) 90 or less (No condensation) Between case and SG: 10 (500 D) 21.2 oz (00 g) LESA2-S3 200 Series LESB Model LESB1-S5 LESB1-S7 LESB2-S5 LESB2-S7 LESB2-S8 ompatible motor capacity [] ompatible encoder Main ontrol Power voltage [] Allowable voltage fluctuation [] Rated current [A] ontrol voltage [] Allowable voltage fluctuation [] Rated current [A] Parallel input Parallel output Max. input pulse frequency [pps] In-position range setting [pulse] Error excessive Function Torque limit Setting communication Operating temperature range Operating humidity range [%RH] Storage temperature range Storage humidity range [%RH] Insulation resistance [MΩ] eight Absolute 18-bit encoder (Resolution: pulse/rev) Single phase 100 to 120 A (50/0 Hz) Single phase 85 to 132 A Three phase 200 to 230 A (50/0 Hz) Single phase 200 to 230 A (50/0 Hz) Three phase 170 to 253 A Single phase 170 to 253 A Single phase 100 to 120 A (50/0 Hz) Single phase 85 to 132 A SB communication and RS422 communication cannot be performed at the same time. Single phase 200 to 230 A (50/0 Hz) Single phase 170 to 253 A inputs outputs 1 M (when differential receiver), 200 k (when open collector) 0 to ±10000 (ommand pulse unit) ±3 rotations Parameter setup or external analog input setup (0 to 10 D) SB communication, RS422 communication 1 32 to 131 F (0 to 55 ) (No freezing) 90 or less (No condensation) 4 to 149 F ( 20 to 5 ) (No freezing) 90 or less (No condensation) Between case and SG: 10 (500 D) 28.2 oz (800 g) 35.3 oz (1000 g)

7 A Servo Motor Driver Series LES Specifications Series LES Model ompatible motor capacity [] ompatible encoder Main ontrol ommunication specifications ommand method Power voltage [] Allowable voltage fluctuation [] Rated current [A] ontrol voltage [] Allowable voltage fluctuation [] Rated current [A] Applicable Fieldbus protocol (ersion) onnection cable Remote station number ommunication speed [bps] able length Max. overall cable length [m] able length between stations [m] I/O occupation area (Inputs/Outputs) Number of connectable drivers Remote register input Point table No. input Indexer positioning input Setting communication Operating temperature range Operating humidity range [%RH] Storage temperature range Storage humidity range [%RH] Insulation resistance [MΩ] eight LES1-S5 100 LES1-S7 200 Single phase 100 to 120 A (50/0 Hz) Single phase 85 to 132 A Single phase 100 to 120 A (50/0 Hz) Single phase 85 to 132 A k 1200 LES2-S Three phase 170 to 253 A Single phase 170 to 253 A Single phase 200 to 230 A (50/0 Hz) Single phase 170 to 253 A 0.2 -Link communication (er. 1.10) -Link er compliant cable (Shielded 3-core twisted pair cable) 1 25 k 900 Absolute 18-bit encoder (Resolution: pulse/rev) 1 to M or more 1 station occupied (Remote I/O 32 points/32 points)/(remote register 4 words/4 words) 2 stations occupied (Remote I/O 4 points/4 points)/(remote register 8 words/8 words) p to 42 (when 1 station is occupied by 1 driver), p to 32 (when 2 stations are occupied by 1 driver), when there are only remote device stations. Available with -Link communication (2 stations occupied) Available with -Link communication, RS-422 communication -Link communication (1 station occupied): 31 points -Link communication (2 stations occupied): 255 points RS-422 communication: 255 points Available with -Link communication -Link communication (1 station occupied): 31 points -Link communication (2 stations occupied): 255 points LES2-S M 10 LES2-S8 400 Three phase 200 to 230 A (50/0 Hz) Single phase 200 to 230 A (50/0 Hz) 10 M 100 SB communication, RS422 communication 2 32 to 131 F (0 to 55 c) (No freezing) 90 or less (No condensation) 4 to 149 F ( 20 to 5 ) (No freezing) 90 or less (No condensation) Between case and SG: 10 (500 D) 28.2 oz (800 g) 35.3 oz (1000 g) 1 If the system comprises of both -Link er and er compliant cables, er specifications are applied to the cable extensions and the cable length between stations. 2 SB communication and RS-422 communication cannot be performed at the same time. 7

8 Series LES Specifications Series LESS Model ompatible motor capacity [] ompatible encoder Main ontrol Power voltage [] Allowable voltage fluctuation [] Rated current [A] ontrol voltage [] Allowable voltage fluctuation [] Rated current [A] Applicable Fieldbus protocol Setting communication Operating temperature range Operating humidity range [%RH] Storage temperature range Storage humidity range [%RH] Insulation resistance [MΩ] eight LESS1-S5 100 LESS1-S7 200 Single phase 100 to 120 A (50/0 Hz) Single phase 85 to 132 A Single phase 100 to 120 A (50/0 Hz) Single phase 85 to 132 A 0.4 LESS2-S5 100 Absolute 18-bit encoder (Resolution: pulse/rev) LESS2-S7 200 Three phase 200 to 230 A (50/0 Hz) Single phase 200 to 230 A (50/0 Hz) Three phase 170 to 253 A Single phase 170 to 253 A Single phase 200 to 230 A (50/0 Hz) Single phase 170 to 253 A 0.2 SSNET III (High-speed optical communication) SB communication 32 to 131 F (0 to 55 ) (No freezing) 90 or less (No condensation) 4 to 149 F ( 20 to 5 ) (No freezing) 90 or less (No condensation) Between case and SG: 10 (500 D) 28.2 oz (800 g) LESS2-S oz (1000 g) 8

9 A Servo Motor Driver Series LES Power Supply iring Example: LESA LESA - Main circuit Single phase 200 to 230 A or Single phase 100 to 120 A NFB M L1 Built-in regenerative L2 resistor P Motor M ontrol circuit 24 D ircuit protector Detector Main ircuit Power Supply onnector: Accessory Terminal name Function Details Protective earth (PE) Should be grounded by connecting the servo motor s earth terminal and the control panel s protective earth (PE). L1 onnect the main circuit. Main circuit LESA1: Single phase 100 to 120 A, 50/0 Hz L2 LESA2: Single phase 200 to 230 A, 50/0 Hz P Servo motor () Servo motor () Servo motor () Terminal to connect regeneration option LESA -S1: No need for connection LESA -S3, S4: onnected at time of shipping. If regeneration option is required for Model Selection, connect to this terminal. onnect to motor cable (,, ) ontrol ircuit Power Supply onnector: Terminal name Function Details 24 0 ontrol circuit (24 ) ontrol circuit (0 ) Accessory 24 side of the control circuit (24 D) which supplies the driver. 0 side of the control circuit (24 D) which supplies the driver. L1 L2 P

10 Series LES Power Supply iring Example: LESB, LES, LESS LESB1- LES1- LESS1- Single phase 100 to 120 A NFB M L1 Open L2 N NP3 Motor M P1 P2 PE P LESB2- LES2- LESS2- D L11 L21 Detector For single phase 200 A For three phase 200 A Single phase 200 to 230 A NFB M L1 L2 L3 N NP3 Motor M Three phase 200 to 230 A NFB M L1 L2 L3 N( ) NP3 Motor M P1 P1 P2 PE P2 PE P P(+) D L11 Detector D L11 Detector L21 L21 Note) For single phase 200 to 230 A, should be connected to L1 and L2 terminals, with nothing connected to L3. Main ircuit Power Supply onnector: Terminal name Function Details L1 L2 L3 N P1 P2 Main circuit Accessory onnect the main circuit. LESB1/LES1/LESS1: Single phase 100 to 120 A, 50/0 Hz onnection terminal: L1,L2 LESB2/LES2/LESS2: Single phase 200 to 230 A, 50/0 Hz onnection terminal: L1,L2 Three phase 200 to 230 A, 50/0 Hz onnection terminal: L1,L2,L3 Do not connect. onnect between P1 and P2. (onnected at time of shipping.) ontrol ircuit Power Supply onnector: Accessory Accessory Terminal name Function Details P Regeneration onnect between P and D. (onnected at time of shipping.) If regeneration option is required for Model Selection, connect to this option D terminal. L11 L21 ontrol circuit Motor onnector: NP3 onnect the control circuit. LESB1/LES1/LESS1: Single phase 100 to 120 A, 50/0 Hz onnection terminal: L11,L21 LESB2/LES2/LESS2: Single phase 200 to 230 A, 50/0 Hz onnection terminal: L11,L21 Three phase 200 to 230 A, 50/0 Hz onnection terminal: L11,L21 Terminal name Function Details Servo motor () Servo motor () Servo motor () onnect to motor cable (,, ) 10 L1 L2 L3 N P1 P2 P D L11 L21 LESB Front view example

11 A Servo Motor Driver Series LES ontrol Signal iring Example: LESA This wiring example shows connection with a PL (FX3- MT/ES) manufactured by Mitsubishi Electric as when used in position control mode. Refer to the LESA operation manual and any technical literature or operation manuals for your PL and positioning unit before connecting to another PL or positioning unit. Note 5) 2 m or less PL FX3- MT/ES (Manufactured by Mitsubishi Electric) Sequencer S/S 24 0 L N Y000 S/S OM1 Y010 OM3 Y004 OM2 X X X Note 2) 24 D DIOM OP DOOM PP NP R INP RD OP LG SD Plate LESA Note 4) Note 4) ALM MBR LA LAR 17 LB 18 LBR 19 LZ 20 LZR 14 LG Plate SD RA1 RA2 10 m or less Note 3) Failure Electromagnetic brake interlock A-phase pulse detector B-phase pulse detector Z-phase pulse detector ontrol common Note 4) Forced stop EM1 8 Servo ON Reset Forward rotation stroke end Reverse rotation stroke end SON 4 RES 3 LSP LSN 7 10 m or less PE Note 1) Note 1) For preventing electric shock, be sure to connect the driver circuit (), s protective earth (PE) terminal to the control panel, s protective earth (PE). Note 2) For interface use, 24 D ±10% 200 ma using an external source. 200 ma is the value when all I/O command signals are used and reducing the number of inputs/outputs can decrease current capacity. Refer to Operation Manual for required current for interface. Note 3) The failure (ALM) is ON during normal conditions. hen it is OFF (alarm occurs), stop the sequencer signal using the sequence program. Note 4) The same name signals are connected inside the driver. Note 5) For command pulse input with an open collector method. hen a positioning unit loaded with a differential line driver method is used, it is 10 m or less. 11

12 Series LES ontrol Signal iring Example: LESB This wiring example shows connection with a positioning unit (QD75D) manufactured by Mitsubishi Electric as when used in position control mode. Refer to the LESB operation manual and any technical literature or operation manuals for your PL and positioning unit before connecting to another PL or positioning unit. Positioning unit QD75D (Manufactured by Mitsubishi Electric) LEAROM 14 LEAR 13 RDYOM 12 READY 11 PLSE F+ 15 PLSE F 1 PLSE R+ 17 PLSE S/SR 18 PG0 9 PG0 OM 10 Emergency stop Servo ON Reset Proportion control External torque limit selection Forward rotation stroke end Reverse rotation stroke end pper limit setting Analog torque limit +10 /Maximum torque Note 2) 24 D Note 5) 10 m or less Note 4) DIOM 20 DOOM 4 R 41 RD 49 PP PG NP 35 NG LZ LZR LG 3 SD Plate 10 m or less Note 4) EMG 42 SON 15 RES 19 P 17 TL 18 LSP 43 LSN 44 DOOM 47 P15R 1 TLA 27 LG 28 SD Plate 2 m or less LESB Note 4) DIOM ALM 23 ZSP 25 TL 24 INP 4 LA 5 LAR LB 7 LBR 34 LG 33 OP 1 P15R Plate SD Note 4) RA1 RA2 RA3 RA4 2 m or less 10 m or less Note 3) Failure Zero speed detection Torque limiting Positioning completion A-phase pulse detector B-phase pulse detector ontrol common ontrol common Z-phase pulse detector (Open collector) N 3 MO1 ±10 D Analog monitor 1 1 LG ±10 D 2 MO2 Analog monitor 2 2 m or less PE Note 1) Note 1) For preventing electric shock, be sure to connect the driver, s protective earth (PE) terminal to the control panel, s protective earth (PE). Note 2) For interface use, 24 D ±10% 300 ma using an external source. Note 3) The failure (ALM) is ON during normal conditions. hen it is OFF (alarm occurs), stop the sequencer signal using the sequence program. Note 4) The same name signals are connected inside the driver. Note 5) For command pulse input with a differential line driver method. For open collector method, it is 2 m or less. 12

13 A Servo Motor Driver Series LES ontrol Signal iring Example: LES LES Forced stop Proximity dog Forward rotation stroke end Reverse rotation stroke end Note 2) 24 D Power + N DIOM 5 DOOM 17 EMG 1 DOG 2 LSP 3 LSN 4 10 m or less N 14 RD 15 ALM 1 ZP 13 LZ 2 LZR 11 LA 24 LAR 12 LB 25 LBR 23 LG Plate SD RA1 RA2 RA3 10 m or less Ready Note 3) Failure Home position return completion Z-phase pulse detector A-phase pulse detector B-phase pulse detector ontrol common PE Note 1) -Link Note 1) For preventing electric shock, be sure to connect the driver, s protective earth (PE) terminal (marked ) to the control panel, s protective earth (PE). Note 2) For interface use, 24 D ±10% 150 ma using an external source. Note 3) The failure (ALM) is ON during normal conditions. hen it is OFF (alarm occurs), stop the sequencer signal using the sequence program. 13

14 Series LES ontrol Signal iring Example: LESS 10 m or less 10 m or less LESS Forced stop pper stroke limit (FLS) Lower stroke limit (RLS) Proximity dog (DOG) Note 2) 24 D Note 4) Note 4) DIOM D0OM MBR EM INP D ALM D12 12 D DIOM LA 1 LAR 7 LB 17 LBR 8 LZ 18 LZR 11 LG RA1 RA2 RA3 Note 2) Electromagnetic brake interlock In position Note 3) Failure A-phase pulse detector B-phase pulse detector Z-phase pulse detector ontrol common Servo system controller Note 5) SSNET III optical cable (Option) A 4 MO1 1 LG 14 MO2 Plate SD Analog monitor 1 Analog monitor 2 B S1 2 m or less S2 Note 7) 12 PE Note 1) A LESS (Axis 2) S1 Note ) B S2 Note 7) Note 5) SSNET III optical cable (Option) A 12 LESS (Axis 3) S1 Note ) Note 8) ap B A B S2 12 LESS (Axis n) S1 S2 12 Note 7) Note ) Note 7) Note 1) For preventing electric shock, be sure to connect the driver, s protective earth (PE) terminal (marked ) to the control panel, s protective earth (PE). Note 2) For interface use, 24 D ±10% 150 ma using an external source. Note 3) The failure (ALM) is ON during normal conditions. hen it is OFF (alarm occurs), stop the sequencer signal using the sequence program. Note 4) The same name signals are connected inside the driver. Note 5) se the following SSNET III optical cables. Refer to SSNET III optical cable on page 15 for cable models. able SSNET III optical cable able model LE-SS- Note ) onnections from Axis 2 onward are omitted. Note 7) p to 1 axes can be set. Note 8) Be sure to place a cap on unused A/B. able length 0.15 m to 3 m 14

15 A Servo Motor Driver Series LES Options Motor cable, Lock cable, Encoder cable (LES common) S M B E LE S M S 5 A Motor type A servo motor able description Motor cable Lock cable Encoder cable Direction of A Axis side B ounter axis side able length (L) [m] A 10 able type S Standard cable R Robotic cable LE-SM-S is MR-PS1BL M-A -L manufactured by Mitsubishi Electric. LE-SB-S is MR-BKS1BL M-A -L manufactured by Mitsubishi Electric. LE-SE-S is MR-J3ENBL M-A -L manufactured by Mitsubishi Electric. LE-SM-R is MR-PS1BL M-A -H manufactured by Mitsubishi Electric. LE-SB-R is MR-BKS1BL M-A -H manufactured by Mitsubishi Electric. LE-SE-R is MR-J3ENBL M-A -H manufactured by Mitsubishi Electric. LE-SM- : Motor cable (13.7) (30) L LE-SB- : Lock cable (11.8) (29.) L LE-SE- : Encoder cable (13) (30) L I/O LE SN A LE-SNA LE-SNB LE-SNS A B S ontroller type LESA, LES LESB LESS LE-SNA: EL ()/ (shell kit) manufactured by 3M or equivalent item. LE-SNB: PE ()/ F0-008 (shell kit) manufactured by 3M or equivalent item. LE-SNS: PE ()/ F0-008 (shell kit) manufactured by 3M or equivalent item (LES common) LE MR RB LA 15 () ø Mounting hole (12) type Allowable regenerative 30 Allowable regenerative 100 onfirm regeneration option to be used in Model Selection Dimensions [mm] Model LA LB L LE-MR-RB LE-MR-RB MR-RB- manufactured by Mitsubishi Electric. SSNET III optical cable LE SS 1 LD (20) L LB LD S S Motor type A servo motor able description SSNET III optical cable LE-SS- is MR-J3BS M manufactured by Mitsubishi Electric. able length L 0.15 m K 0.3 m J 0.5 m 1 1 m 3 3 m 15

16 Series LES Options LESA LESB LES LESS Drivers SB cable P Setup software (MR onfigurator TM ) Setup software (MR onfigurator TM ) (LESA, LESB, LES, LESS common) LE MR SETP221 Display language Nil Japanese version E English version MRZJ3-SETP221 manufactured by Mitsubishi Electric. Refer to Mitsubishi Electric s website for operating environment and version update information. MR onfigurator TM is a registered trademark or trademark of Mitsubishi Electric. Adjustment, motor display, diagnostics, parameter read/write, and test operation can be performed upon a P. ompatible P hen using setup software (MR onfigurator TM ), use an IBM P/AT compatible P that meets the following operating conditions. Hardware Requirements Note 1) Note 2) Note 3) P Display Keyboard Mouse Printer SB cable Equipment OS Available HD space ommunication interface Setup software (MR onfigurator TM ) LE-MR-SETP221 indows 98, indows Me, indows 2000 Professional, indows XP Professional / Home Edition, indows ista Home Basic / Home Premium / Business / ltimate / Enterprise indows 7 Starter / Home Premium / Professional / ltimate / Enterprise 130 MB or more se SB port Resolution 1024 x 78 or more Must be capable of high color (1-bit) display. The connectable with the above P The connectable with the above P The connectable with the above P The connectable with the above P LE-MR-J3SB Note 4, 5) Note 1) Before using a P for setting LESA point table method/program method or LES point table No. input, upgrade to version 5 (Japanese version) /version 4 (English version). Refer to Mitsubishi Electric s website for version upgrade information. Note 2) indows, indows ista, indows 7 are registered trademarks of Microsoft orporation in the nited States and/or other countries. Note 3) This software may not run correctly depending on the P that you are using. Note 4) Not compatible with 4-bit indows XP and 4-bit indows ista. Note 5) Order SB cable separately. SB cable (3 m) Battery (only for LESB, LES or LESS) LE MR J3SB LE MR J3BAT MR-J3SB manufactured by Mitsubishi Electric. MR-J3BAT manufactured by Mitsubishi Electric. able for connecting P and driver when using the setup software (MR onfigurator TM ). Do not use any cable other than this cable. Battery for replacement. Absolute position data is maintained by installing the battery to the driver. 1

CC-Link Compatible AC Servo Amplifier <MR-J3-T type> with Built-in Positioning Function

CC-Link Compatible AC Servo Amplifier <MR-J3-T type> with Built-in Positioning Function MO LM/ G T P R M Fn SHIFT ES E B 1STEP. F PRU03 TEST F ST OP RESET General-Purpose Servo MELSERO-J3 ew Product Release S0-E -Link ompatible Servo mplifier with Built-in Positioning Function

More information

MELSERVO-J4 series servo amplifier for connecting to SSCNET of MR-J2S-B is newly released.

MELSERVO-J4 series servo amplifier for connecting to SSCNET of MR-J2S-B is newly released. General-Purpose A Servo MELSERO-J4 onversion nit for SSNET of MR-J2S-B ompatible Servo Amplifier: MR-J4-B-RJ020 onversion nit for SSNET of MR-J2S-B: August 2013 New Product Release S130-1E-A MELSERO-J4

More information

TECHNICAL BULLETIN [ 1 / 54 ]

TECHNICAL BULLETIN [ 1 / 54 ] TECHNICAL BULLETIN [ 1 / 54 ] [Title] Procedures for Replacing Positioning Module AD71 with QD75 [Date of Issue] April 2009 (Ver. B: September 2017) [Relevant Models] QD75P N/QD75D N Thank you for your

More information

General-Purpose AC Servo MELSERVO-JE Series Ethernet Compatible Servo Amplifier MR-JE-C 0.1 kw to 3 kw August 2017

General-Purpose AC Servo MELSERVO-JE Series Ethernet Compatible Servo Amplifier MR-JE-C 0.1 kw to 3 kw August 2017 General-Purpose A Servo MELSERVO-JE Series Ethernet ompatible Servo Amplifier MR-JE- 0.1 kw to 3 kw August 2017 New Product Release SV1703-2E-A MODBUS /TP -Link IE Field Network Basic ompatible Servo Amplifier

More information

SERVO AMPLIFIERS & MOTORS

SERVO AMPLIFIERS & MOTORS SERO AMLIFIERS & MOTORS Advanced servo technology with optical network Mitsubishi Electric orporation agoya orks is a factory certified for ISO (standards for environmental management systems) and ISO9(standards

More information

Proposing control by a hydraulic servo and V/F inverters

Proposing control by a hydraulic servo and V/F inverters Drive Goods SSCNET III/H Analog Speed Command Unit (Number of Control Axes: Axes) [DGAF/DGAF-P0] New Product Release No. Proposing control by a hydraulic servo and V/F inverters using a SSCNET III/H compatible

More information

MR-J4-_A SERVO AMPLIFIER INSTRUCTION MANUAL

MR-J4-_A SERVO AMPLIFIER INSTRUCTION MANUAL General-Purpose AC Servo General-Purpose Interface AC Servo MODEL MR-J4-_A SERVO AMPLIFIER INSTRUCTION MANUAL 1 Functions and configuration 1. FUNCTIONS AND CONFIGURATION 1.1 Summary The

More information

Connection to Host Controller

Connection to Host Controller onnection to Host ontroller Example of onnection to achine ontroller P achine controller P I/O Power supply + + - + 0 - / SEROPK (EHTROLINK-II communications reference type) - I / II Other SEROPK or terminator

More information

Series LC8. Positioning Driver/For AC Servomotor. Compliant actuators/series LJ1, Series LG1, Series LTF

Series LC8. Positioning Driver/For AC Servomotor. Compliant actuators/series LJ1, Series LG1, Series LTF Positioning Driver/For AC Servomotor Series LC Compliant actuators/series LJ, Series LG, Series LTF Ho to Order Master LC B H N M F 50 W 0 W 00 W Poer voltage 0 VAC/5 VAC 00 VAC/ VAC Command I/O N NPN

More information

Committed to Premium Quality. AC Servo System Catalog

Committed to Premium Quality. AC Servo System Catalog Committed to Premium Quality AC Servo System Catalog Company Profile CONTENTS DB100 Series AC Servo System 03 Application fields 04 Servo Driver Product Description 05 Servo Motor Product Description 07

More information

General-Purpose AC Servo J2-Jr Series General-Purpose Interface Compatible MODEL MR-J2-03A5 SERVO AMPLIFIER INSTRUCTION MANUAL

General-Purpose AC Servo J2-Jr Series General-Purpose Interface Compatible MODEL MR-J2-03A5 SERVO AMPLIFIER INSTRUCTION MANUAL General-Purpose AC Servo J2-Jr Series General-Purpose Interface Compatible MODEL MR-J2-03A5 SERVO AMPLIFIER INSTRUCTION MANUAL C Safety Instructions (Always read these instructions before using the equipment.)

More information

15. ABSOLUTE POSITION DETECTION SYSTEM

15. ABSOLUTE POSITION DETECTION SYSTEM 15. ABSOLUTE POSITI DETECTI SYSTEM 15. ABSOLUTE POSITI DETECTI SYSTEM CAUTI If an absolute position erase alarm (AL.25) has occurred, always perform home position setting again. Not doing so can cause

More information

J2-Super Series MR-J2S- A4/B4 SERVO AMPLIFIER SUPPLEMENTARY INSTRUCTION MANUAL. General-Purpose AC Servo. 400VAC Compatible MODEL

J2-Super Series MR-J2S- A4/B4 SERVO AMPLIFIER SUPPLEMENTARY INSTRUCTION MANUAL. General-Purpose AC Servo. 400VAC Compatible MODEL General-Purpose A Servo J2-Super Series 400VA ompatible MODEL MR-J2S- A4/B4 SERVO AMPLIFIER SUPPLEMENTARY INSTRUTION MANUAL The corresponding manuals indicated below are required to use the 400VA ompatible

More information

AC SERVO SYSTEMS. Ver.4

AC SERVO SYSTEMS. Ver.4 A SERVO SYSTEMS R Ver. Servo Motor Model Number Nomenclature Servo Motor Example: The following model number defines a "R" servomotor with mm flange size, rated output, min - maximum rotation speed, V

More information

MITSUBISHI General-Purpose AC Servo D-S24 MR-J2- Specifications BCN-B

MITSUBISHI General-Purpose AC Servo D-S24 MR-J2- Specifications BCN-B MITSUBISHI General-Purpose AC Servo MR-J2- Specifications D-S24-1 - CHANGE Rev. Contents Drawn by - 2 - CTENTS 1. OUTLINE 2. SPECIFICATIS 3. CNECTI 4. I/O SIGNALS 5. OPERATI SEQUENCE 6. DISPLAY 7. PARAMETERS

More information

AC Servo Motor Driver (Pulse input type/positioning type)

AC Servo Motor Driver (Pulse input type/positioning type) Doc. no. LEC-OM05601 (Simplified edition) PRODUCT NAME AC Servo Motor Driver (Pulse input type/positioning type) MODEL / Series / Product Number LECSA Series Contents Introduction...6 1 Procedure before

More information

SERVO AMPLIFIERS & MOTORS

SERVO AMPLIFIERS & MOTORS SERVO AMPLIFIERS & MOTORS Apply servos to all machines with Easy To Use Advanced One-Touch Tuning Servo gains are adjusted with one-touch ease without a personal computer. Tolerance against Instantaneous

More information

Drive Goods Junction Terminal Block For General-Purpose Interface Servo Amplifier. Model DG2SV1TB User's Manual (Detailed)

Drive Goods Junction Terminal Block For General-Purpose Interface Servo Amplifier. Model DG2SV1TB User's Manual (Detailed) Drive Goods Junction Terminal Block For General-Purpose Interface Servo Amplifier Model User's Manual (Detailed) SAFETY PRECAUTIONS Before Using the Product Do not attempt to install, operate, maintain,

More information

BLuAC5 Brushless Universal Servo Amplifier

BLuAC5 Brushless Universal Servo Amplifier BLuAC5 Brushless Universal Servo Amplifier Description The BLu Series servo drives provide compact, reliable solutions for a wide range of motion applications in a variety of industries. BLu Series drives

More information

SD1000 Series Servo System FRECON ELECTRIC (SHENZHEN) CO.,LTD (V1.0)

SD1000 Series Servo System FRECON ELECTRIC (SHENZHEN) CO.,LTD (V1.0) Series Servo System (.) Stable and Reliable Servo System Stable and Reliable Servo System bit S/IN High ccuracy Encoder Differential drive connection can support M pulse input / single terminal drive optional

More information

MITSUBISHI General Purpose AC Servo

MITSUBISHI General Purpose AC Servo MITSUBISHI General Purpose AC Servo MELSERVO-J2S Full Closed Control Compatible MR-J2S- A -PY091 (3.5kW or less) MR-J2S- A-S091 (5k, 7kW) MITSUBISHI ELECTRIC CORPORATION NAGOYA WORKS * Revision Version

More information

BLuAC5 Brushless Universal Servo Amplifier

BLuAC5 Brushless Universal Servo Amplifier BLuAC5 Brushless Universal Servo Amplifier Description The BLu Series servo drives provide compact, reliable solutions for a wide range of motion applications in a variety of industries. BLu Series drives

More information

MR-J2S-B/B4 MELSERVO. Servo amplifier and motors. Instruction Manual MITSUBISHI ELECTRIC MITSUBISHI ELECTRIC INDUSTRIAL AUTOMATION

MR-J2S-B/B4 MELSERVO. Servo amplifier and motors. Instruction Manual MITSUBISHI ELECTRIC MITSUBISHI ELECTRIC INDUSTRIAL AUTOMATION MITSUBISHI ELETRI MELSERVO Servo amplifier and motors Instruction Manual MR-J2S-B/B4 Art.-No.: 168353 07 06 2006 Version A MITSUBISHI ELETRI INDUSTRIAL AUTOMATION Instruction Manual Servo amplifier MR-J2S-B/B4

More information

TECHNICAL BULLETIN. Thank you for your continued support of Mitsubishi programmable logic controllers, MELSEC-A series.

TECHNICAL BULLETIN. Thank you for your continued support of Mitsubishi programmable logic controllers, MELSEC-A series. [Issue No.] T12-0015-A [Page] 1/39 Thank you for your continued support of Mitsubishi programmable logic controllers, MELSEC-A series. This bulletin is written for those intending to replace the /A1SD71

More information

Diameter Ø50mm Shaft Type Magnetic Multi-Turn Absolute Rotary Encoder MGAM50S B F PN 24

Diameter Ø50mm Shaft Type Magnetic Multi-Turn Absolute Rotary Encoder MGAM50S B F PN 24 Ø0mm Shaft Magnetic Multi-Turn Absolute Type Diameter Ø0mm Shaft Type Magnetic Multi-Turn Absolute otary Encoder Features Higher resistant to vibration and impact by magnetic elements than optical encoder

More information

SV2Dx Servo Drives SV200 Servo Drives for DC-Powered Applications

SV2Dx Servo Drives SV200 Servo Drives for DC-Powered Applications 24 to 60 VDC input 10 A cont., 20 A peak output current Compact size for multi-axis applications Ideal for OEMs Designed for use with J Series motors Wide range of control options 8 regular digital inputs,

More information

MR-E- A-KH003 MR-E- AG-KH003

MR-E- A-KH003 MR-E- AG-KH003 General-Purpose AC Servo EZMOTION MR-E Super General-Purpose Interface MODEL MR-E- A-KH003 MR-E- AG-KH003 INSTRUCTION MANUAL Safety Instructions (Always read these instructions before using the equipment.)

More information

Position control unit

Position control unit Ver. HGE 3 EVOPK POE Ver. HGE 3 EVOPK POE Ver. HGE 3 EVOPK POE Ver. HGE 3 EVOPK POE J-F7 - MEHTOLIK-II Multi-axes position controller via high-speed MEHTOLIK-II Up to 6 axes controlled with minimum wiring.

More information

50 to 400 W Pulse Train Servo Drives and AC Servomotors. Advanced functionality in an ultra compact design

50 to 400 W Pulse Train Servo Drives and AC Servomotors. Advanced functionality in an ultra compact design Advanced functionality in an ultra compact design 50 to 400 W Pulse Train Servo Drives and A Servomotors Increase productivity Solve equipment problems Maximize performance Improve accuracy ompact Design,

More information

AC Servo System Configuration

AC Servo System Configuration A Servo System onfiguration SureServo series drives and motors part numbering system Series SV: SureServo A servo omponent Type A: Drive L: Low inertia motor M: Medium inertia motor SV A - 4 omponent Option

More information

Motor Drives & Controllers

Motor Drives & Controllers Motor Drives & Controllers For the past 20 years, FORMOSA MOTORS is well known for pursuing high technology motors in Taiwan. To make customer s requirements satisfatisory & perfect We supply customers

More information

SERVO AMPLIFIERS & MOTORS

SERVO AMPLIFIERS & MOTORS SERVO AMPLIFIERS & MOTORS Apply servos to all machines with Easy To Use Advanced One-Touch Tuning Servo gains are adjusted with one-touch ease without a personal computer. Tolerance against Instantaneous

More information

(For Rotary Servomotors)

(For Rotary Servomotors) MECHATROLINK-III Communications Reference SERVOPACKs SGDV- E2 (For Rotary Servomotors) Designations S G D V - 2R9 E 2 A 002 00 0 v Series SGDV SERVOPACKs with DC Power Input st+2nd+ 3rd digits 4th digit

More information

SVAC3. 400W AC Powered Servo Drive. Accessories C IP IP IP C IP. Control Options* For more information, visit:

SVAC3. 400W AC Powered Servo Drive. Accessories C IP IP IP C IP. Control Options* For more information, visit: Feedback E = Encoder board 3 = 3.5A cont, 7.4A peak, 120VA 1.8A cont, 5.4A peak, 220VA ontrol S = Basic version Q = Q Programming = EtherNet/ BLuA5-Si SVA3-S-E120 SVA3-S-E220 SVA3-Q-E120 SVA3-Q-E220 SVA3--E120

More information

R7 Series Servos. Advanced functionality in an ultra compact design

R7 Series Servos. Advanced functionality in an ultra compact design R7 Series Servos Advanced functionality in an ultra compact design»» Solve e q u i p m e n t p ro b l e m s»» M a x i m i ze p e r fo r m a n ce»» I m p rove a ccura c y a n d i n c re a s e p ro d u c

More information

MR-J2S- CL SERVO AMPLIFIER INSTRUCTION MANUAL

MR-J2S- CL SERVO AMPLIFIER INSTRUCTION MANUAL General-Purpose AC Servo Program Compatible MODEL MR-J2S- CL SERVO AMPLIFIER INSTRUCTION MANUAL J2-Super Series F Safety Instructions (Always read these instructions before using the equipment.) Do not

More information

AZ Series. Function Edition. Closed Loop Stepping Motor and Driver Package. Operation. I/O signals. Parameter

AZ Series. Function Edition. Closed Loop Stepping Motor and Driver Package. Operation. I/O signals. Parameter HM-6262 Closed Loop Stepping Motor and Driver Package Operation I/O signals Parameter AZ Series Function Edition Method of control via Modbus RTU (RS-485 communication) Method of control via industrial

More information

SMG Systems Service et Machines Graphiques. Servo Variateur RIMA MR-J2S-CP

SMG Systems Service et Machines Graphiques. Servo Variateur RIMA MR-J2S-CP SMG Systems SMG Systems Service et Machines Graphiques DOCUMENTATION TECHNIQUE Type : Modèle : Marque : Servo Variateur RIMA MR-J2S-CP MITSUBISHI Doc version : SH(NA)030017-A (01/02) Anglais Service technique

More information

AC Servo Motor Driver (Pulse input type/positioning type)

AC Servo Motor Driver (Pulse input type/positioning type) LEC-OM056 (Doc No. JXC -OMT0052-A) (Simplified Edition) PRODUCT NAME AC Servo Motor Driver (Pulse input type/positioning type) MODEL / Series / Product Number LECSA Series 文書管理 No. - 旧文書体系 No. 対応表 JXC

More information

Analog Voltage/Pulse Train Reference Type SERVOPACKs. (For Rotary Servomotors) (For Linear Servomotors) SGDV - R70 A 01 B

Analog Voltage/Pulse Train Reference Type SERVOPACKs. (For Rotary Servomotors) (For Linear Servomotors) SGDV - R70 A 01 B Analog Voltage/Pulse Train Reference Type SERVOPACKs SGDV- 0 (For Rotary Servomotors) SGDV- 05 (For Linear Servomotors) Model Designations SGDV - R70 A 0 B 002000 Options 002000 Base-mounted, varbish(standard)

More information

Product Discontinuation Notices. Discontinuation Notice of AC Servomotors/drivers. OMNUC U series

Product Discontinuation Notices. Discontinuation Notice of AC Servomotors/drivers. OMNUC U series PRODUCT NEWS Product Discontinuation Notices March 2, 2009 Servomotors/Servo Drivers No.2009091E Discontinuation Notice of AC Servomotors/drivers. OMNUC U series Product Discontinuation Recommended Replacement

More information

MR-J3 Servomotors and Amplifiers

MR-J3 Servomotors and Amplifiers MR-J3 Servomotors and Amplifiers With a capacity range of 5W to 55kW, we reduced the size of both the amplifier and motor, added a high resolution encoder and advanced auto-tuning and vibration control.

More information

Revisions. * First edition Sakaishi

Revisions. * First edition Sakaishi Sub No. Revisions Contents Created by * First edition 2011-12-1 Sakaishi -2- CONTENTS 1. Functions and Configuration...3 2. Installation...12 3. Signals and Wiring...13 4. Startup...24 5. Parameters...27

More information

Indexer unit JUSP-NS600. System configuration. Smart and simple positioning solution.

Indexer unit JUSP-NS600. System configuration. Smart and simple positioning solution. Smart and simple positioning solution. No programming languages are required. Connects directly to the drive Allows serial network control and discrete I/O control Servo axis set-up, actuation and monitoring

More information

MR-C Servo SERVOMOTORS & AMPLIFIERS. Step Up to Servo Performance

MR-C Servo SERVOMOTORS & AMPLIFIERS. Step Up to Servo Performance MR-C Servo SERVOMOTORS & AMPLIFIERS Step Up to Servo Performance Small, Easy-to-Use, High- Performance. An Extraordinarily Compact, Intelligent Servo. The MR-C brushless servo, in a handy super-compact

More information

Servo Motor Driver. 4. Specifications: Digital Driver Model ACS806. Digital Technology, max. 80 V DC / 6.0 A, W. 1. Product Description:

Servo Motor Driver. 4. Specifications: Digital Driver Model ACS806. Digital Technology, max. 80 V DC / 6.0 A, W. 1. Product Description: Digital Driver Model ACS806 Digital Technology, max. 80 V DC / 6.0 A, 50 400 W 1. Product Description: Leadshine's fully digital AC servo drive ACS806 is developed with 32-bit DSP based on advanced control

More information

SERVO AMPLIFIERS & MOTORS. Advanced servo technology with optical network

SERVO AMPLIFIERS & MOTORS. Advanced servo technology with optical network SERO MPLIFIERS & MOTORS dvanced servo technology with optical network Servo mplifier Series and Servo Motor Models Flexible specifications corresponding to users needs s wide product lines from 5 to 55k

More information

RDV-X/RDV-P Robot driver Only for pulse train control

RDV-X/RDV-P Robot driver Only for pulse train control Single axis Robot driver Only for pulse train control As the size is small and weight is light, it is easy to use in automated machinery. Features 1 Dedicated pulse train control The dedicated pulse train

More information

Cable lead-out. Standard. Rear lead-out (Connecter used in models 58 and 65) Variation. Side lead-out is available. (Models 25, 32, and 40) Option

Cable lead-out. Standard. Rear lead-out (Connecter used in models 58 and 65) Variation. Side lead-out is available. (Models 25, 32, and 40) Option SHA Series The SHA series comprises AC servo actuators that integrate a thin speed reducer HarmonicDrive for precision control and a super flat AC servo motor. The SHA series features an unmatched compact

More information

Connection and Operation

Connection and Operation Connection and Operation LED Display Control Module Motor Regeneration Unit Terminals Power Connection Terminals Protective Earth Terminal Internal Potentiometer Acceleration Time Potentiometer Deceleration

More information

FX2N-10PG. MELSEC FX Series. Programmable Logic Controllers. User's Manual MITSUBISHI ELECTRIC MITSUBISHI ELECTRIC INDUSTRIAL AUTOMATION

FX2N-10PG. MELSEC FX Series. Programmable Logic Controllers. User's Manual MITSUBISHI ELECTRIC MITSUBISHI ELECTRIC INDUSTRIAL AUTOMATION MITSUBISHI ELECTRIC MELSEC FX Series Programmable Logic Controllers User's Manual FX2N-10PG Art. no.: 138030 15 04 2003 JY992D93401 Version D MITSUBISHI ELECTRIC INDUSTRIAL AUTOMATION Model FX2N-10PG Pulse

More information

SmartStep servo motors

SmartStep servo motors HARGE R7M-A@, R7M-AP@ SmartStep servo motors The smart alternative to stepper motors SmartStep motors can be controlled by SmartStep drive and XtraDrive ylindrical and flat servo motor types are available

More information

MDS-DJ Drive System Selections

MDS-DJ Drive System Selections MITSUBISHI READY MDS-DJ Drive System Selections Digital JR AC servo and spindle drive systems deliver utra compact drive units with built-in power supplies to contribute to reducing control panel size.

More information

(For Linear Servomotors) S G D V - R70 A 21 A th digit. 7th digit. 5th6th digits

(For Linear Servomotors) S G D V - R70 A 21 A th digit. 7th digit. 5th6th digits MECHATROLINK- Communications Reference Type PACKs SGDV- (For Rotary Servomotors) SGDV- 5 (For Linear Servomotors) Designations S G D V - R70 A A 000 00 0 v Series SGDV PACK st+nd+ rd digits 4th digit 5th6th

More information

General-Purpose AC Servo. MELSERVO-JE Servo amplifier INSTRUCTION MANUAL (TROUBLE SHOOTING)

General-Purpose AC Servo. MELSERVO-JE Servo amplifier INSTRUCTION MANUAL (TROUBLE SHOOTING) General-Purpose AC Servo MELSERVO-JE Servo amplifier INSTRUCTION MANUAL (TROUBLE SHOOTING) B Safety Instructions Please read the instructions carefully before using the equipment. To use the equipment

More information

General-Purpose AC Servo. MELSERVO-JE Servo amplifier INSTRUCTION MANUAL (TROUBLE SHOOTING)

General-Purpose AC Servo. MELSERVO-JE Servo amplifier INSTRUCTION MANUAL (TROUBLE SHOOTING) General-Purpose AC Servo MELSERVO-JE Servo amplifier INSTRUCTION MANUAL (TROUBLE SHOOTING) B Safety Instructions Please read the instructions carefully before using the equipment. To use the equipment

More information

ERCD. Features ERCD. Main functions P Supports 4 operating methods including pulse train, programming, point trace, online instructions

ERCD. Features ERCD. Main functions P Supports 4 operating methods including pulse train, programming, point trace, online instructions single-axis Single-axis single-axis Single axis Dedicated for T4L / T5L / C4L / C5L / YMS Low price and compact in size. In addition to the conventional functions, a pulse train function is added for a

More information

Analog monitor cable. Filter Motion control unit. General purpose cable. (Refer to chapter Sigma-II rotary motors) Cables SGMGH, SGMUH, SGMSH, SGMBH

Analog monitor cable. Filter Motion control unit. General purpose cable. (Refer to chapter Sigma-II rotary motors) Cables SGMGH, SGMUH, SGMSH, SGMBH CHARGE NS A R C N B C N 4 XD-@, XD-@-E Intelligent servo drive. Integrated controller and network connectivity. NCT. Patented non-linear algorithm for tight control Very low tracking error with no overshoot

More information

Series. integrated Control Motor LINEAR SOLUTIONS MADE EASY

Series. integrated Control Motor LINEAR SOLUTIONS MADE EASY integrated ontrol Motor ELETROMATE LINEAR SOLUTIONS MADE EASY A What is a? The SmartActuator is a controller, drive and motor integrated with an actuator for an all-in-one solution. Tolomatic has over

More information

General-Purpose AC Servo. MELSERVO-JE Servo amplifier INSTRUCTION MANUAL (TROUBLE SHOOTING)

General-Purpose AC Servo. MELSERVO-JE Servo amplifier INSTRUCTION MANUAL (TROUBLE SHOOTING) General-Purpose AC Servo MELSERVO-JE Servo amplifier INSTRUCTION MANUAL (TROUBLE SHOOTING) D Safety Instructions Please read the instructions carefully before using the equipment. To use the equipment

More information

4th digit. 7th digit. digits. Specifications. Interface. MECHATROLINK-2 communications Reference Type (for rotary servomotors)

4th digit. 7th digit. digits. Specifications. Interface. MECHATROLINK-2 communications Reference Type (for rotary servomotors) MECHATROLINK- Communications Reference Type PACKs SGDV- (For Rotary Servomotors) SGDV- 5 (For Linear Servomotors) Model Designations S G D V - R70 A A 000 00 0 v Series SGDV PACK st+nd+ rd digits 4th digit

More information

General-Purpose AC Servo. MELSERVO-JE Servo amplifier INSTRUCTION MANUAL (TROUBLE SHOOTING)

General-Purpose AC Servo. MELSERVO-JE Servo amplifier INSTRUCTION MANUAL (TROUBLE SHOOTING) General-Purpose AC Servo MELSERVO-JE Servo amplifier INSTRUCTION MANUAL (TROUBLE SHOOTING) F Safety Instructions Please read the instructions carefully before using the equipment. To use the equipment

More information

Agilent AEDA-3300 Series Ultra Miniature, High Resolution Incremental Kit Encoders Data Sheet

Agilent AEDA-3300 Series Ultra Miniature, High Resolution Incremental Kit Encoders Data Sheet Description The AEDA-3300 series are high performance, cost effective, three-channel optical incremental encoder modules with integrated bearing stage. By using transmissive encoder technology to sense

More information

SilverMax Datasheet. QuickSilver Controls, Inc. NEMA 23 Servomotors.

SilverMax Datasheet. QuickSilver Controls, Inc. NEMA 23 Servomotors. SilverMax Datasheet NEMA 23 Servomotors QuickSilver Controls, Inc. www.quicksilvercontrols.com SilverMax Datasheet - NEMA 23 Servomotors 23 Frame Sizes: 23-3, 23-5, 23H-1, 23H-3, 23H-5 / Series: E, E3,

More information

PKS-PRO-AEA-EC-30-GP22

PKS-PRO-AEA-EC-30-GP22 PKS-PRO-AEA-EC-30 - EtherCAT Servo System FEATURES Updates 1000 Inputs/Outputs of Information of 2,025 oz-in Power Ratings up to 3000 Watts Open Network Based on Ethernet 2,500 PPR Incremental Encoder

More information

TRD-J Series Incremental Encoders

TRD-J Series Incremental Encoders Series Incremental Encoders Features mm thick shaft and ø5 mm body Vibration and shock resistant metal slit plate durable at 1, P/R Operating voltage ranging from 4.75 to 3 VDC Totem-pole output facilitating

More information

Compact body with high performance

Compact body with high performance General-Purpose AC Servo MELSERVO-J3W MODEL Servo Amplifier MR-J3W-0303BN6 Servo Motor HG-AK Series * December 2012 New Product Release SV1212-4E 2-axis integrated type Compact body with

More information

The Allen-Bradley Servo Interface Module (Cat. No SF1) when used with the Micro Controller (Cat. No UC1) can control single axis

The Allen-Bradley Servo Interface Module (Cat. No SF1) when used with the Micro Controller (Cat. No UC1) can control single axis Table of Contents The Allen-Bradley Servo Interface Module (Cat. No. 1771-SF1) when used with the Micro Controller (Cat. No. 1771-UC1) can control single axis positioning systems such as found in machine

More information

PKS-PRO-AEA-EC-20-GP22

PKS-PRO-AEA-EC-20-GP22 PKS-PRO-AEA-EC-20 - EtherCAT Servo System FEATURES Updates 1000 Inputs/Outputs of Information of 1352 oz-in Power Ratings up to 2000 Watts Open Network Based on Ethernet 2,500 PPR Incremental Encoder Maximum

More information

FD423-EA-000 EtherCAT Servo Drive

FD423-EA-000 EtherCAT Servo Drive FEATURES Power Rating of 400-750 Watts 220 VAC Open Network Based on Ethernet RS232 and EtherCAT Supports Modbus 485 and RS232 Communication Protocol Rated Current 4A, Peak Current 15A Supports Pulse +

More information

Cable connection. Sigma-II series SERVOPACK SGDH- 200V. Ver. Servo Drive CN3 (CN10) CN1 CN2 NS500 JUSP-NS500 SERVOPACK. 200V Ver.

Cable connection. Sigma-II series SERVOPACK SGDH- 200V. Ver. Servo Drive CN3 (CN10) CN1 CN2 NS500 JUSP-NS500 SERVOPACK. 200V Ver. JUSP- unit connectivity with positioning functionality. Connects directly to the drive Simplifies distributed control and information management No programming languages are required. Various positioning

More information

AD Series. AC Servo Drive. For the highest requirements in performance and precision

AD Series. AC Servo Drive. For the highest requirements in performance and precision Range of Performance.1 kw 7 kw (.32 33.4 ) Drastically Reduced Motor Cogging Torque Advanced Drive Technology Autotuning Built-in Programmable Sequence with max. 512 program steps and 1 positions Plug

More information

SMARTSTEP 2 SERVO SYSTEM

SMARTSTEP 2 SERVO SYSTEM SMARTSTEP 2 SERVO SYSTEM A new step in servodrive simplicity»» Precise and cost-effective»»ultra-compact design»»simple to use and set up SmartStep 2 the right step forward... Omron knows that simplicity

More information

MR-JE-_A SERVO AMPLIFIER INSTRUCTION MANUAL (POSITIONING MODE)

MR-JE-_A SERVO AMPLIFIER INSTRUCTION MANUAL (POSITIONING MODE) General-Purpose AC Servo General-Purpose Interface AC Servo MODEL MR-JE-_A SERVO AMPLIFIER INSTRUCTI MANUAL (POSITIING MODE) C Safety Instructions Please read the instructions carefully before using the

More information

Encoder - Absolut 2RMHF-SSI

Encoder - Absolut 2RMHF-SSI Absolute Encoder: Ø24 mm Hollow Shaft: Ø3 mm to ¼ Inch Singleturn or Multiturn SSI Interface Binary or Gray Code Preset of Zero Position Choice of Counting Direction IP-Rating: IP64 or IP67 Mechanical

More information

4th digit. 5th+6th digits. 7th digit. Specifications. 8th+9th+10th digits Options (hardware)* 4. Interface

4th digit. 5th+6th digits. 7th digit. Specifications. 8th+9th+10th digits Options (hardware)* 4. Interface MECHATROLINK- Communications Reference Type PACKs SGDV- (For Rotary Servomotors) SGDV- 5 (For Linear Servomotors) Designations S G D V - R70 A A 000 00 0 v Series SGDV PACK st+nd+ rd digits 4th digit 5th+6th

More information

(For Rotary Servomotors) (For Linear Servomotors) SGDV - R70 A 01 B Voltage Interface 100 VAC 200 VAC 400 VAC V (Three Phase)

(For Rotary Servomotors) (For Linear Servomotors) SGDV - R70 A 01 B Voltage Interface 100 VAC 200 VAC 400 VAC V (Three Phase) MECHATROLINK-III Communications Reference Type s SGDV- (For Rotary Servomotors) SGDV- (For Linear Servomotors) Designations SGDV - R70 A 0 B 00000 Options vseries SGDV Code 00000 Base-mounted, varbish(standard)

More information

General-Purpose AC Servo. MELSERVO-J4 Servo amplifier INSTRUCTION MANUAL (TROUBLE SHOOTING)

General-Purpose AC Servo. MELSERVO-J4 Servo amplifier INSTRUCTION MANUAL (TROUBLE SHOOTING) General-Purpose AC Servo MELSERVO-J4 Servo amplifier INSTRUCTION MANUAL (TROUBLE SHOOTING) K Safety Instructions Please read the instructions carefully before using the equipment. To use the equipment

More information

Single-phase or three phase AC220V (-15% ~ +10%) 50 ~ 60Hz

Single-phase or three phase AC220V (-15% ~ +10%) 50 ~ 60Hz KT270-H Servo Drive Features: The use of DSP ( digital signal processor ) chip, greatly accelerating the speed of data acquisition and processing, the motor running with good performance. Application of

More information

SGDV- E5 (For Linear Servomotors)

SGDV- E5 (For Linear Servomotors) PACKs with Additional Options SGDV- E (For Rotary Servomotors) SGDV- E5 (For Linear Servomotors) Model Designations SGDV- R70 A E A 000 00 0 v Series SGDV PACK Current Voltage 00 V 400 V Code Applicable

More information

Integrated servo motor

Integrated servo motor R88E-AECT@, R88S-EAD@ Integrated servo motor Motor and drive integrated for space optimization Wide range of motors from 2.55 Nm to 25 Nm 3000 rpm rated speed Peak torque 300% of rated torque IP65 protection

More information

General-Purpose AC Servo. Ethernet Interface SERVO AMPLIFIER INSTRUCTION MANUAL (PROFILE MODE) MR-JE-_C MODEL

General-Purpose AC Servo. Ethernet Interface SERVO AMPLIFIER INSTRUCTION MANUAL (PROFILE MODE) MR-JE-_C MODEL General-Purpose AC Servo Ethernet Interface MODEL MR-JE-_C SERVO AMPLIFIER INSTRUCTI MANUAL (PROFILE MODE) C Safety Instructions Please read the instructions carefully before using the equipment. To use

More information

Cable connection. Sigma-II series SERVOPACK SGDH- 200V. Ver. Servo Drive CHARGE POWER CN3 (CN10) CN1 CN2. JUSP-NS300 DeviceNet unit SERVOPACK

Cable connection. Sigma-II series SERVOPACK SGDH- 200V. Ver. Servo Drive CHARGE POWER CN3 (CN10) CN1 CN2. JUSP-NS300 DeviceNet unit SERVOPACK HAGE POWE 2 EVOPAK GH- HAGE POWE 2 EVOPAK 2V HAGE POWE 2 EVOPAK HAGE POWE 2 EVOPAK HAGE POWE 2 EVOPAK JUP- eviceet unit eviceet connectivity with positioning functionality. onnects directly to the igma-ii

More information

PKS-PRO-AEA-EC-08-JP22

PKS-PRO-AEA-EC-08-JP22 PKS-PRO-AEA-EC-08 - Servo System FEATURES Updates 1000 Inputs/Outputs of Information of 338 oz-in Power Ratings up to 750 Watts Open Network Based on Ethernet 17-bit Absolute Encoder Maximum Speed of 4,500

More information

General-Purpose AC Servo. J2-Super Series. CC-Link Compatible MR-J2S- CP-S084 SERVO AMPLIFIER INSTRUCTION MANUAL MODEL

General-Purpose AC Servo. J2-Super Series. CC-Link Compatible MR-J2S- CP-S084 SERVO AMPLIFIER INSTRUCTION MANUAL MODEL General-Purpose AC Servo CC-Link Compatible MODEL MR-J2S- CP-S84 SERVO AMPLIFIER INSTRUCTION MANUAL J2-Super Series F Safety Instructions (Always read these instructions before using the equipment.) Do

More information

Multi Function Timer with Free power, Compact size W38 H42mm

Multi Function Timer with Free power, Compact size W38 H42mm Multi Function with Free power, ompact size W8 H4mm Features Wide power supply range : 100-40VA 50/0Hz, 4-40VD (universal), 4VA 50/0Hz / 4VD (universal), 1VD Various output operations( operation modes)

More information

PKS-PRO-AEA-EC-02-JP22

PKS-PRO-AEA-EC-02-JP22 PKS-PRO-AEA-EC-02 - Servo System FEATURES Updates 1000 Inputs/Outputs of Information of 90 oz-in Power Ratings up to 200 Watts Open Network Based on Ethernet 17-bit Absolute Encoder Maximum Speed of 4,500

More information

SGDV- 01 SGDV- 05. Analog Voltage/Pulse Train Reference Type SERVOPACKs. (For Rotary Servomotors) (For Linear Servomotors)

SGDV- 01 SGDV- 05. Analog Voltage/Pulse Train Reference Type SERVOPACKs. (For Rotary Servomotors) (For Linear Servomotors) Analog Voltage/Pulse Train Reference Type PACKs SGDV- 0 (For Rotary Servomotors) SGDV- 0 (For Linear Servomotors) Model Designations S G D V - R70 A 0 A 000 00 0 v Series SGDV PACK st+nd+ rd digits th

More information

Cable connection. Sigma-II series SERVOPACK SGDH- 200V. Ver. Servo Drive CN3 (CN10) CN1 CN2 JUSP-NS500 NS500 SERVOPACK. 200V Ver.

Cable connection. Sigma-II series SERVOPACK SGDH- 200V. Ver. Servo Drive CN3 (CN10) CN1 CN2 JUSP-NS500 NS500 SERVOPACK. 200V Ver. JUS- unit connectivity with positioning functionality. Connects directly to the drive Simplifies distributed control and information management No programming languages are required. Various positioning

More information

Fan and Pump AC Inverter

Fan and Pump AC Inverter Fan and Pump AC Inverter Key Features for Fan and Pump Applications PID and Auto Energy Saving Functions. Input Phase Loss and Output Phase Loss Protection. LCD Keypad can be used to copy parameter settings

More information

XIOC technology and networking modules

XIOC technology and networking modules / XIO XIO digitale and analog input/output modules XIO technology and networking modules XIO the compact I/O and much more XIO are local expansion modules for direct connection to all Xontrol controllers.

More information

AC Servo Motor Driver (SSCNET /H Type)

AC Servo Motor Driver (SSCNET /H Type) Doc. no. LEC-OM07901 (Simplified edition) PRODUCT NAME AC Servo Motor Driver (SSCNET /H Type) MODEL / Series / Product Number LECSS2-T Series CONTENTS Introduction...5 1. Procedure before operation...5

More information

L25 Incremental Optical Encoder

L25 Incremental Optical Encoder L25 Incremental Optical Encoder The L25 is a lighter duty version of the H25. With low starting torque, a 1/4" diameter stainless steel shaft and a drawn aluminum cover. In most intances, the L25 encoder

More information

Material: Weight: Bearing Life: Shaft Speed: Starting Torque: Mass Moment of Inertia: Shaft Loads:

Material: Weight: Bearing Life: Shaft Speed: Starting Torque: Mass Moment of Inertia: Shaft Loads: Shaft Encoder - Ø 50 mm Shaft: Ø 6 mm to Ø 12 mm Resolution up to 12.500 ppr IP 65 (IP 67 option) Formerly named 2R or 2R-3L Automation / Electrical Specifications Code: Resolution: Supply Voltage: Voltage:

More information

AC SERVO DRIVES SERIES. Servopacks. Certified for ISO9001 and ISO14001

AC SERVO DRIVES SERIES. Servopacks. Certified for ISO9001 and ISO14001 AC SERVO DRIVES SERIES Servopacks Certified for ISO9001 and ISO14001 JQA-0422 JQA-EM0202 CONTENTS SERVOPACKs Single-axis Analog Voltage/Pulse Train Reference SERVOPACKs 326 Single-axis MECHATROLINK-II

More information

MINAS E. Options. Dimensions Options. Cable part No. designation. MINAS E Driver / Options. Encoder cable. Motor cable, Brake cable E24

MINAS E. Options. Dimensions Options. Cable part No. designation. MINAS E Driver / Options. Encoder cable. Motor cable, Brake cable E24 Dimensions able part No. designation ncoder cable able end treatment (Driver side) olex Inc. connector (INS,P series, series) able end treatment (ncoder side) Tyco lectronics, P connector able type PV

More information

MELSERVO-J2-Super SERVO AMPLIFIERS & MOTORS

MELSERVO-J2-Super SERVO AMPLIFIERS & MOTORS SERVO MPLIFIERS & MOTORS MELSERVO-J-Super Mitsubishi Electric orporation agoya Works is a factory certified for ISO4 (standards for environmental management systems) and ISO9(standards for quality assurance

More information

Temposonics. E-Series Model ER. Magnetostrictive, Absolute, Non-contact Linear-Position Sensors. Analog and Start/Stop Outputs.

Temposonics. E-Series Model ER. Magnetostrictive, Absolute, Non-contact Linear-Position Sensors. Analog and Start/Stop Outputs. Temposonics Magnetostrictive, Absolute, Non-contact Linear-Position Sensors Analog and Start/Stop Outputs SENSORS Document Part Number: 550996 Revision E Data Sheet FEATURES Linear, Absolute Measurement

More information

MGL Avionics Autopilot. Servo. Specifications & Installation Manual. Last Update: 20 October Disclaimer:

MGL Avionics Autopilot. Servo. Specifications & Installation Manual. Last Update: 20 October Disclaimer: MGL Avionics Autopilot Servo Specifications & Installation Manual Last Update: 20 October 2010 Disclaimer: MGL Avionics should not be held responsible for errors or omissions in this document. Usage of

More information

General-Purpose AC Servo. MELSERVO-J4 Servo amplifier INSTRUCTION MANUAL (TROUBLE SHOOTING)

General-Purpose AC Servo. MELSERVO-J4 Servo amplifier INSTRUCTION MANUAL (TROUBLE SHOOTING) General-Purpose AC Servo MELSERVO-J4 Servo amplifier INSTRUCTION MANUAL (TROUBLE SHOOTING) N Safety Instructions Please read the instructions carefully before using the equipment. To use the equipment

More information